Over 1 million tech questions and answers.

The server encountered an error while creating New Virtual Machine. Failed to access configuration store 0x80070003

Q: The server encountered an error while creating New Virtual Machine. Failed to access configuration store 0x80070003

This started happening few days ago probably after a windows update. I tried uninstalling HyperV component restart, readd restart etc no luck. My existing hyperv virtual machines fail with the same error, to create a new one also fails.
Please advise, Thank you.
The server encountered an error while creating New Virtual Machine.
Failed to create a new virtual machine
New Virtual Machine failed to realize
Failed to access configuration store 0x80070003




Gokhan Varol

Read other answers
RELEVANCY SCORE 200
Preferred Solution: The server encountered an error while creating New Virtual Machine. Failed to access configuration store 0x80070003

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 86.8

Hi,

Below, see XP virtual machine configuration Error Msg. indicating: "User does not have sufficient access rights".


Yet the next image: "Never notify me when", indicated I am at the lowest UAC level. Or are the lower levels represented by Easter Eggs?


Also, note the Windows XP mode is installed, but because of the XP virtual machine configuration msg above, I can't go further.


I have Googled this situation to no avail. Found a few vague postings but they have lead to dead ends.

Any help, suggestions will be much appreciated.

cheers,

klxdrt

Read other answers
RELEVANCY SCORE 86.4

I'm using an AlienWare M14 machine. I tried to create a virtual machine locally using Client Hyper-V on Windows 8 Pro, but it still doesn't work (took me a lot of time). I added the Hyper-V features in "Turn windows feature on or off", and all of the requirements to run Hyper-V are fulfilled (SLAT, BIOS, 64 bits, ...) (I attach the msinfo32 output in this post). At the last step in creating a virtual machine, it says "... General access denied error... (0x80070005)" (for details, check my attached image). I googled, tried some solutions but still no luck so far.

Thanks for any help.

A:Error creating virtual machine (Client Hyper-V, Win 8 Pro)

Actually, the error is general access denied. I have already uploaded a new image. Any help would be appreciated. Thank you.

Read other 19 answers
RELEVANCY SCORE 86

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS.  I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start.  (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off.  The BIOS has virtualization enable.  Help!!! driving me nuts for a week now.
Nick :(

A:Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

Finally got it to work.  Our admin lock down the devices that could be installed on the computer.  It turned out that one of the vm devices was not allowed to be installed.  Thank community.
nick

Read other 11 answers
RELEVANCY SCORE 83.2

Hi dear comunity.

I go to work with Visual Studio 2013 for the creation Windows Phone apps. When I installed the Visual Studio, the setup told me that I need install or configure to Hyper-V. I followed all the steps for that. Control Panel -> Programs ->Turn Windows features
on or off -> Check all Hyper V components -> and OK. And then this error appear: Error: 0x80071A90.

Somebody can help me with this problem. I want to work very soon with Windows Phone Apps for my institute.

Thanks  for all :)

A:Error: 0x80071A90. Problems with Hyper V Configuration (for virtual machine, Windows Phone).

are you using an anti virus software? try to disable it if so.Microsoft Certified Solutions Developer - Windows Store Apps Using C#

Read other 3 answers
RELEVANCY SCORE 83.2

Hi dear comunity.
I go to work with Visual Studio 2013 for the creation Windows Phone apps. When I installed the Visual Studio, the setup told me that I need install or configure to
Hyper-V. I followed all the steps for that. Control Panel -> Programs ->Turn Windows features on or off -> Check all Hyper V components -> and OK. And then this error appear: Error: 0x80071A90.
Somebody can help me with this problem. I want to work very soon with Windows Phone Apps for my institute.
Thanks  for all :)

Read other answers
RELEVANCY SCORE 77.6

I'm trying to install XP Mode on my Win7 Pro machine (64-bit). I was able to install the XP Mode application, but when I try to install the KB958559-x64 update I get a "Windows Update Standalone Installer" error message that reads: "Installer encountered
an error: 0x80070003. The system cannot find the path specified."
Virtualization is enabled in the BIOS and I've attempted to run the file in a "clean boot". I've also uninstalled XP Mode and tried installing fresh. Always with the same error when I go to install the update (again, XP Mode loads fine). I'm not sure what
path the file is trying to locate. I have successfully installed XP Mode on three other machines, with no issues.
My research to date shows that this error also occurs in Vista machines and has to do with the windows update. No resolutions that I found seem to be relevant here.
Does anyone have insight into why I'm getting this error?
Thanks a million!

A:Error 0X80070003 pops up when trying to install KB958559-x64 on a Win7-64 machine

Are you installing the update from a network share? Copy the update to a folder on your HDD and run the installer again."A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

Read other 9 answers
RELEVANCY SCORE 73.6

I just installed windows 8.1 pro on an MSI z97 pc mate motherboard with I5 3.3 ghz processor, 16 gb ddr3 1600 MHz ram, with embedded realtek pcie gbe NIC. I checked and found that hardware virtualization is enabled by default in the BIOS.

I tried to set up a virtual switch using the latest bios and drivers from MSI. I created a virtual switch choosing the external option and the share with host OS option. I then connected to the VM. No network connectivity on VM but host still worked.

I then used autopatcher to update windows 8.1 on the vm. I removed and reinstalled the virtual switch choosing external option and share with host OS option. Same conditions occurred.
And then I installed the latest NIC driver. Same problem - media disconnected.

I tried this process with the latest driver from the realtek website which was a couple years more up to date. I had such high hopes! Same problem.

I then used msconfig to prevent all non-Microsoft services from starting and rebooted. I removed and recreated the switch and I was still hoping for success. Same exact conditions occurred.

These are the conditions that occur whenever an external switch with host os sharing enabled is installed in between all of these troubleshooting steps. It looks exactly the same every time...
The host machine can still access the network but it does so through the virtual switch. Ipconfig /all on the host reveals the following...
Microsoft Windows [Version 6.3.9600]
(c) 2013 M... Read more

Read other answers
RELEVANCY SCORE 73.6

We are migrating several hundred workstations from XP to Windows 7 Enterprise. We have several legacy and internally developed applications that cannot run under Windows 7 and will be using XP Mode for them. This works well in a test environment. Some of the applications will not work in NAT mode, so bridged mode is required. Our issue is that several of the workstations are in a common area and used by many users. Each time a new user logs on to the host and launches an XP Mode application a new virtual machine is created in that user’s profile which acquires a new, unique IP address from DHCP. This behavior introduces all sorts of problems, not least of which is the depletion of addresses in the DHCP scope. We tried putting the original VMC file in the Default user profile to no avail. Is there a way to prevent a new VM from being created for each new user so that all the users on a workstation will use the same virtual machine? Many thanks.
 

Read other answers
RELEVANCY SCORE 73.2

Hi everyone,
Got error msg (Installer encountered and error: 0x80070003) when trying to install Remote server administration tools for windows 7. Any idea?
Many thanks!

info:
win7 pro 64bit sp1
admin access
package from: KB958830

A:Error when trying to install Remote Server Administration Tools for Windows 7 (0x80070003)

error: 0x80070003. The system cannot find the path specified.
Are you running the installation from a network share ? Try it locally.Benoit Lecours | Blog: System Center Dudes

Read other 2 answers
RELEVANCY SCORE 72

Done a clean install of Windows 8.1 and noticed a repeated event in the event log Administrative Events
"Windows Store failed to sync machine licenses. Result code 0x80070002"
Does any know what this event means, google doesn't show anything!

Clean install done using the generic Windows 8.1 License Key and Activated with my upgrade Key.

Windows shows that it is Activated and no issues otherwise, just interested if anybody else has found this event in the event log

Cheers
Gedstar

A:Windows Store failed to sync machine licenses

Hello Gedstar,

Are you having any issues with the Store?

If so, you might see if you may be able to manually sync the Store license.

App - Sync License in Windows 8

Hope this helps for now,
Shawn

Read other 13 answers
RELEVANCY SCORE 72

Event ID: 512
Task Category: None
Level: Error
Description:
Windows Store failed to sync machine licenses. Result code 0x80070002

The above is last error that I still have in Event Log. My understanding is that I should sing in with Microsoft store to get rid of this error.
And that is the thing: I am not willing to sign. I never bought anything from MS App Store (which I disabled). So how can I stop this annoying attempts of licenses syncing?

I did some extensive search but could not find any solution to the problem except signing with App Store.

Thank you for any suggestion

A:Windows Store failed to sync machine licenses.

Hello Michal,

If you like, the Windows Store has a ton of free apps as well that you may like to install and use. They are not all pay for apps.

Updates for your default modern apps that came with Windows 8.1 are also updated through the Store.

You could use the method in the tutorial below to sync app licenses to stop the error, but it requires you to open the Store and of course requires you to sign in to the Store with a Microsoft account to do.

App - Sync License in Windows 8

Read other 4 answers
RELEVANCY SCORE 71.2

Hi.

I have (also according to Windows Control Panel > Installed Updates) successfully installed KB2919355 on 13th Apr 2014. So to me, the KB2919355 is in place (and various KB installations after that, too) <- I do get all the Windows System updates (including security updates) BUT not Windows Store application updates.

So the problem is the "Windows Store failed to sync machine licenses. Result code 0x80070490" which pops into Windows Event log on daily basis.



TEMPORARILY fix: running Windows update troubleshooter fixes the problem (it stops and restarts BITS and Cryptographic services) and after a while I get a notification to the Windows Store Tile that there are new updates (if any). BUT after rebooting Windows the problem (Windows Store failed to sync machine licenses. Result code 0x80070490) always re-appears in the Event logs.

Here is the report of successfull Windows update troubleshooter.



Also:

1) running DISM does not help (see below)
2) Going to Store settings and "Sync licenses" does not help
Dism /Online /Cleanup-Image /ScanHealth ->

[==========================100.0%==========================]
The component store is repairable.
The operation completed successfully.



Then run:

Dism /Online /Cleanup-Image /RestoreHealth ->

[==========================100.0%==========================]
The restore operation failed. Either the repair source was not found or the comp
onent store cannot be repair... Read more

A:Windows Store failed to sync machine licenses (0x80070490)

Hello TJ,

See if clearing the Store cache and manually syncing the app licenses for the Store may help.

Store Cache - Clear in Windows 8

App - Sync License in Windows 8

Read other 9 answers
RELEVANCY SCORE 71.2

I too keep getting the "Windows Store failed to sync machine licenses. Result code 0x80070490" Event Log Message on one of the three machines I have W8.1 Update 1 installed on. I have done the Sync routine many times and I have "Disabled" the WSRefreshAppsListTask and yet I still get the Event Log Error every day when I boot the system. Seems like there must be something else going on that is screwed up on this system. Help would be appreciated!

A:Windows Store failed to sync machine licenses. 0x80070490

I get that same Event ID 512 daily or maybe after a restart too. answers.microsoft.com forum has much discussion and apparently someone says Microsoft has it listed in the todo list and expect a fix soon. But.... does it matter If everything works fine ? If you look at the Tast that triggers the error, it says completed successfully.

Seems not right to disable the task just to hide an error.

Read other 2 answers
RELEVANCY SCORE 68.8

Last night when shutting down the virtual machine within Win7, the virtual machine hanged. Win7 gave me the option of doing a forced shutdown, which I accepted. But now this morning when I try to re-open the virtual machine (which is powered down) I keep
getting the error message "The virtual machine could not be started. An unknown error occurred."  PLEASE HELP: I have months of research stored in the virtual machine which I need to retrieve. Any suggestions gratefully received.

A:URGENT: My XP-Mode Virtual Machine has crashed: it is powered down and refuses to power up. PLEASE HELP: I have months of research stored in the virtual machine which I need to retrieve.

Hi,

 

The issue could be incorrect configuration of XP mode.

 

Trying to rename the . vmc and .vsv from C:\Users\Username\AppData\Local\Microsoft\Windows Virtual PC\Virtual Machines
and run Virtual Machine again.

 

Best Regards,

Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Read other 5 answers
RELEVANCY SCORE 68.4

I am using a virtual IP to provide access to a mysql cluster. However since I don't have unlimited hardware I am unable to put the mysql servers as the sole application on each system. I end up with both an instance of apache and mysql on each system. I've configured the network with LVS and ldirector for load balancing. I've assigned a virtual IP to the system, say 192.168.1.107, I make that the primary IP to eth0 on the load balancer and as a loopback interface on the two machines (sql1 and sql2) running the mysql servers.

If I make a request from any server that is not sql1 or sql2, everything works fine, but when I am making a request from either of those machines it will not send to the load balancer, instead it picks up the loopback and just uses the local server.

Does anyone have any ideas for how to over come this? I'm kind of new to VIP's and anything more advanced than a static/dynamic ip address. I believe my setup is using direct routing.

Thanks!
 

A:mysql virtual IP server and client same machine

Guessing (but nobody else tried)..How about puttin and entry entry in the local host file to redirect?
 

Read other 2 answers
RELEVANCY SCORE 68.4

Hi,

My company bought out a company recently and now I have to manage a new server. The server is windows 2000 server that is getting fairly old now (not sure exact age of server). There are no more than 10 users accessing the server. It is running out of hard drive space and sometimes the tape backup drive acts up. This server does a bunch of different jobs. The server is running exchange server 2000, a blackberry server for a couple users, ms sql server (I think 2003?) for some accounting software and it is also a file server.

I was thinking of replacing it with a windows 2008 server but that would mean buying all new server software and office 2007 to connect to exchange 2007. Than I would need to migrate data to the new server. I have a some experience with migrating right now as I have setup a test lab to try things out using virtualbox.

So I have also been thinking about converting the windows 2000 server to a virtual machine and running vmware or other virtual machine software on a new server and using the image from the old server.

So my question is, would converting the server to a virtual machine and running it that way be a good idea? It would save a lot of money in software. Does any one have any pro's and con's to this type of idea or would getting a new server be the best option?

Thanks for all the help.
 

A:need advice if I should convert a server to a virtual machine

In my limited experience, virtualization is best for larger corporations that want to reduce the amount of hardware, energy consumption, and space requirements. A lot of the time, if you're a smaller company it would actually cost more in licensing costs to virtualize than to buy another server.
 

Read other 2 answers
RELEVANCY SCORE 68.4

Host OS: Windows 2003 Server running on domain under Active Directory
Guest Virtual Machine OS: Same

The Host Machine and Host OS operate as expected, and can interact with everything in the entire network, including

Other w2k3 servers
Domain Controllers
XP PCs
Linux servers
Linux PCs
However, the Virtual Machine was created using - and runs within - MS Virtual Machine 2005. The VM thinks it's a stand-alone server. It doesn't "see"

the HP 373i gigabit Network Interface Cards (NICs)
anything else in the network
the proxy server/internet gateway
anything on the host's hard drive
The VM DOES see

a non-existent NIC (a generic Intel adapter)
the host machine' s CD-ROM
As an aside, I have the same problem with a PC
Host OS: XP SP2
Guest Virtual Machine OS: Ubuntu Linux 7.10
That VM doesn't "see" the NIC, and lives in its own dark cave.

In each case, the VMs see all the other hardware - except the NICs and hard drives not internal to the VM.

How do I get the VM to acknowledge the NICs so that I can install the NIC drivers and open the VM's eyes to the rest of the Domain?
 

A:Solved: server 2003 - virtual machine - NIC

That 'non-existent' NIC is a 'virtual' one running as a Device on the Virtual Machine.
I'm using Virtual PC 2003 but I think yours is similar.
Try setting the 1st virtual NIC to use each option in the drop-down list in the Settings window.
I think NAT will work but I'm not sure, I only have a small home network so am not familiar with your situation.
 

Read other 3 answers
RELEVANCY SCORE 68.4

Hi everyone. I've just got a quick question that's been bothering me for a while. Recently I've noticed some bizarre activity in Win 7 Professional. I run ESET NOD32 v4, and it shows a 'current activity' readout that displays whatever file is being scanned, and thus currently being accessed by the OS or a program. I was watching it while my system was idle, and suddenly it started to scan through the Virtual Store directory. Specifically, it starting to scan through all of my old IM logs from a legacy IM client (Trillian). Now, I haven't even opened that IM client in a week, and the logs it was scanning were over three months old and haven't been altered since.

I ran a scan with NOD 32 v4, Windows Defender, and MalwareBytes antimalware. All of these came back clean with no infections/intrusions detected... But I can't think of any reason why three-month old files from a program that hasn't been run in a week would be accessed at all, other than a rootkit virus or something hidden poking through my personal correspondence.

Is there some reason that Win 7 might be accessing these file for some other purpose? I don't have automatic backups set up, and it looked pretty specific that the disk activity leafed through that specific folder and then stopped dead without looking at anything else.

Any advice would be appreciated. Thanks.

A:Disk access to Virtual Store folder for no reason?

What application was scanning the logs?

Read other 6 answers
RELEVANCY SCORE 68

Hi Support,
I tried to delete a Hyper-V check point in Hyper-V Manager but failed with an error. However I can create checkpoint without problem. Currently the disk is 14.6GB free of 97.6GB. I have two vm running, i can successfully delete checkpoint for the other vm.
Please advise how to fix this problem. 
The hosting machine OS is Win 8.1 Enterprise 64bit. 
Error message in Windows-Hyper-V-VMMS-Admin:
'xxxxx' failed to remove checkpoint. (Virtual machine ID 9405BED8-CF63-4497-AD27-0A4F4E01BB06)
Virtual machine failed to generate VHD tree: 'Catastrophic failure'('0x8000FFFF').
Cannot delete checkpoint: Catastrophic failure (0x8000FFFF). Checkpoint ID A28B861B-3F04-41AC-82F5-EABB310DDC91.

A:Virtual machine failed to generate VHD tree: 'Catastrophic failure'('0x8000FFFF').

Hi Paul,
I tried to create new snapshot. It was created successfully but still cannot delete the snapshot, the same error. I resolved the problem by deleting the whole snapshot tree. 

Read other 7 answers
RELEVANCY SCORE 67.2

I am running Vista 64 bit with SP1. I do not know if my problem relates to the operating system or SP1 specifically but it may do.
 
I have recently tried to install two things on my system. The first was a digital TV tuner (USB dongle type). My system would not recognise the hardware, then it had a problem finding the drivers and when I guided it to the installation disk it eventually came up with the error code:
 
0x800F0247 A problem was encountered while attempting to add the driver to the store
 
I thought the dongle must be faulty so I returned it to the manufacturer.
 
I subsequently tried to install drivers for my Nokia phone and went through the same problems. However I had previously installed the drivers for this on another computer so I know it works but on my computer,  after much searching by windows and having to again direct it manually to the installation CD, I again get the message:
 
0x800F0247 A problem was encountered while attempting to add the driver to the store.
 
Does anyone have a detailed step by step guide on how to get my computer to add drivers to the driver store when installing new hardware? I ask for a step by step guide because I am a novice at this and the problem just will not go away. I really need to solve this issue.
 
Many thanks.
 
Neil.

Read other answers
RELEVANCY SCORE 66.4

Hi,
On my local host machine there is An E Drive with a capacity of 500GB and it contain VHD file for my virtual machine. Now according to the current situation My E drive is about to fill which is now 490 Gb.
One my Virtual Machine my disk size is 900 Gb . Out of 900 Gb 490Gb is full. If i am deleting some files from my virtual machine is not making any difference the size of VHD file on my host computer.
What is the best way to reduce the size of the my VHD file . 

Help will be Appreciated.
Thanks.

Read other answers
RELEVANCY SCORE 65.6

Hi all,
I am getting this error, whenever I try to connect to server from Hyper-V, I choose local server then I get this message

Check that the Virtual Machine Management service is running and that you are authorized to connect to the server.
In the services, I don't have this service... What should I do...?

Mai Omar Desouki | Software Consultant | Infusion | MCP, MCTS, MCPD, MCITP, MCT Microsoft Certified Trainer & MCC Microsoft Community Contributor | Email: [email protected] | Blog: http://moresharepoint.wordpress.com

A:Check that the Virtual Machine Management service is running and that you are authorized to connect to the server

Here is the solution
1-make sure turn on virtual platform on bios
2- from turn windows features on or off expand hyper-v and enable hyper-v platform (Must)
3- restart your machine it should be working without problem.

This 100 % works

Read other 17 answers
RELEVANCY SCORE 65.2

After changing XP Mode's network adapter (in order to get port forwarding working), I found that I cannot access the internet using a browser anymore.

I went from Shared Network to Realtek PCIe GBE Family Controller in the Virtual Machine settings, which broke its internet connection completely and gave the "limited or no internet connectivity" message. After going back to Shared Network, when loading any page in any of the virtual machine's browsers (Firefox, IE), the page would remain blank then time out after a while. However, pinging websites using cmd worked in the virtual machine. Using the 'repair' option in XP's Network Connections did not help. Disabling the firewall did not help either.

Also, the Windows 7 host machine's internet is working fine.

How do I fix this situation, without having to start anew with another virtual machine?

A:XP Mode virtual machine cannot access internet

If available, run system restore in XP using a point where Internet worked.

Read other 5 answers
RELEVANCY SCORE 65.2

I need to use Time machine. But it gives me a dreaded error saying "Backup failed with error 11". And i cannot run it any longer. What should i do to fix it?

http://www.bidanswer.com/Questions/Q...nfo_10324.html

A:A dreaded error 11 encountered in Time Machine.

That's a Mac program, and you're on a Windows 7 forum...

Read other 1 answers
RELEVANCY SCORE 64.8

I recently installed VMplayer on my Win 7 machine, and I installed Win XP on the VM. So far everything seems to work fine. However, on my home network I have a Linksys NSLU2 mini network server which has a flash drive plugged in that contains my files that I access from any of my home PC's. No problem accessing it from the Win 7 machine, but when I try to setup a "new network place" on the XP system, I get an error telling me that the address is not valid. The format I'm using is:
\\Server Name\Share Name.

Does anyone know what I'm doing wrong? I appreciate any input!!
Thanks
 

A:Solved: Home Network Access from Virtual Machine

Read other 10 answers
RELEVANCY SCORE 64.4

Hi everyone,

I tried to install new updates of Ableton live and the machine crashed badly... and since them it has really gone a bit wonky.

When I press the on button to boot up the laptop I get the following message.

The Windows Boot Configuration Data (BCD) Store file contains some invalid information.

Object : GUID : (8cb2db4-7co5-11de842e-bt611d44fefa)

Description: Windows recovery format.

Status: oxcoooooo24

Info: The configuation for an element within the object is invalid in the boot configuation store.

The assiocated windows boot loader entry may not be available for selection until the problem is rectified by an administrator.

Enter= continue.

So then I press enter... it boots up. (in about 5 seconds as it is a ssd...)

When I do this action: to see if I can do a restore etc...

Start-Control Panel- the progress bar at the top of the expoler window freezes half way and I cannot access any of the menu Items.

Also I canot move this panel or close the window.

I have a back up on another external drive ..... plus I have made a repair disk and so on when I first got the machine.

I would be stoked if you could provide me with the next steps so I can resolve this situation.

Thanks for your time, now lets party on and delve deep into the abyss

A:Windows Boot Configuration Data (BCD) store file error.

Hallo,
hatte auch einen 0x0000024 BCD Fehler. Hatte vor einer Installation die alte Partition auf "VERSTECKT / HIDDEN" gesetzt und nach der Installation vergessen die Partition wieder auf "Partition anzeigen / Show partition" zu setzen und erhielt so bei Bootversuch einige Tage sp?ter den x24 Fehler. Nach dem "ANZEIGEN" funktionierte der Boot wieder.

Read other 2 answers
RELEVANCY SCORE 64

Hi, Recently my antivirus found numerous trojans in C:/users/name/Temp/Local Folder, and seeing this I manually deleted all of the non-folders and non-.xml files in the Local Folder. Ever since then I kept on getting an error message on startup: "JAVA virtual machine launcherUnable to access .jar file sysboot2486260447034318996.jar" So I googled how to remove this error and came upon this site and the moderator nasdaq, who help resolve a similar problem with another user. Then I follow the steps on that post:http://www.bleepingcomputer.com/forums/t/477507/eveytime-i-boot-up-my-computer-i-get-an-error-unable-to-access-jarfile-igfxperf-after-a-trojan/ And I got to the point about using ComboFix, and that is where I stopped since from this step onwards, it is advised to use ComboFIx only under supervision. So here's what I got from DDS (Attached to this Post). Please help me resolve this problem. N.B. I also tried reinstalling Java which didn't work.DDS (Ver_2012-11-20.01) - NTFS_AMD64Internet Explorer: 9.0.8112.16464 BrowserJavaVersion: 10.45.2Run by Simpson at 7:44:12 on 2013-11-18Microsoft Windows 7 Professional 6.1.7601.1.1252.64.1033.18.3979.1912 [GMT 13:00].AV: Avira Desktop *Disabled/Updated* {F67B4DE5-C0B4-6C3F-0EFF-6C83BD5D0C2C}SP: Avira Desktop *Disabled/Updated* {4D1AAC01-E68E-63B1-344F-57F1C6DA4691}SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}.============== Running... Read more

A:Java Virtual Machine Launcher unable to access sysboot248626044703431899

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===Please download AdwCleaner by Xplode onto your Desktop.Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click the Scan button and wait for the process to complete.Click the Report button and the report will open in Notepad.IMPORTANTIf you click the Clean button all items listed in the report will be removed.If you find some false positive items or programs that you wish to keep, Close the AdwCleaner windows.Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click the Scan button and wait for the process to complete.Check off the element(s) you wish to keep.Click on the Clean button follow the prompts.A log file will automatically open after the scan has finished.Please post the content of that log file with your next answer.You can find the log file at C:\AdwCleaner[Sn].txt (n is a number). Please downloadJunkware Removal Tool to your Desktop.Please close your security software to avoid potential conflicts.Run the tool by double-clicking it. If you are using Windows Vista or 7, right-mouse click it and select Run as administrator.The tool will open and start scanning your system.Please be patient as this can take a while to complete, depending on your system's specifica... Read more

Read other 6 answers
RELEVANCY SCORE 64

Hi there,
I've just installed a virtual machine (running XP Pro) onto my Vista machine. The Vista machine has a USB external hard drive attached. When trying to access the data on this hard drive from within the virtual machine (via the bridged network link between the virtual machine and the host) it is incredibly slow. I've tried moving the USB hard drive to another PC on the network (running XP Pro) and accessing it from the XP Pro virtual machine on the first PC, and this works fine. I'd be very grateful for any help or ideas!
Glen
 

A:Virtual Machine on Vista Host - Slow Disk Access

Have you tried using a different port? Could be a slow port.

maybe trying towing down some resources? disabling areo on vista maybe?
 

Read other 3 answers
RELEVANCY SCORE 63.6

Hi this is my first post but I am really confused as to an issue with hyper-V

Whenever I go to open the virtual switch manager, it says; The operation on computer 'DESKTOP-V1A0142' failed: Generic error. Is there anyway to fix this. I have not yet created any switches because it won't let me.

A:Hyper-V error when creating virtual switch.

Hi Nukeproof, welcome to the Ten Forums.

First thing to check is that the Hyper-V Extensible Virtual Switch is enabled in your NIC's Properties:
If it is totally missing click the Install button and install, it, you'll find it under Protocol:
Install if needed, enable it and reboot and try Virtual Switch Manager again.

Kari

Read other 1 answers
RELEVANCY SCORE 62.8

hyper-v - error in creating external virtual switch
I got an error in creating external virtual switch at hyper-v on windows 8 pro x64.

I have one xp vm and tried to make an network connection, but I coul not success.

Please let me know how to make creating external virtual switch at hyper-v.

Thanks in advance.

A:hyper-v - error in creating external virtual switch

Check this tutorial from our own Dwarf: Hyper-V - How to Use in Windows 8.

The tutorial explains to you how to create a virtual switch and your Hyper-V virtual machine.

Kari

Read other 11 answers
RELEVANCY SCORE 62.8

Unable to start the application-the Java Virtual Machine cannot be loaded.
Class not registered

Well thats the error I get. I was trying to use my HP all in one to scan (Which I don't do but once in a blue moon) and I can't get it to work. It was working but I downloaded Java from Sun Micro , and now I get this message. I tried to uninstall the Java to see if that would work but it didn't any thoughts?? I mean I could totally wipe my system and start over which I do occasionally just for giggles and grins but I would like to see if I can fix this.

BTW I'm using XP SP2 with most every update except IE 7

All help is greatly appreciated.

I will let you know I did google the error message and got something about the whole Microsoft issue with Java Lawsuit blah blah blah. Also I found some threads of what other people have done to try and fix this issue, but I don't have any chickens handy and I can't wait until the moon is in the seventh hour of the seventh day of the seventh... you get what I'm saying.

Once again all help is greatly appreciated.
 

Read other answers
RELEVANCY SCORE 62.4

I've spent hours trying to do a repair install of Windows 10 on a VM Ware Fusion 8.5 virtual machine. The host machine is an iMac. The reason I'm doing a repair install is because some system files are corrupted and "sfc /scannow" only gets about halfway before it says it couldn't load some resources then quits.

The "Windows 10 installation has failed" message appears not long after starting the installation when it says about 6%.

I've attached a screenshot of the failure message as well as disk manager and the Panther folder which is curiously unpopulated (there's nothing in the two folders shown above). The Panther folder doesn't contain any error logs. However, on a previous installation attempt, I looked at an error log and it showed that it was not able to copy something from the installation disc to a location on C:/windows.

I have installed Windows 10 without problem on a number of other machines, but I'm stuck here on this one. By the way, no external drives or devices are attached to the machine (other than the apple bluetooth trackpad and keyboard which have never been a problem on other virtual machines). I've tried doing this repair install from the DVD drive as well as by copying the .iso image to the desktop and mounting it in file explorer. The result is the same.

Thanks in advance for any ideas!

Read other answers
RELEVANCY SCORE 62.4

I've spent hours trying to do a repair install of Windows 10 on a VM Ware Fusion 8.5 virtual machine. The host machine is a mid-2010 iMac. The virtual machine is running Windows 10 Home x64 1607. The reason I'm doing a repair install is because some system files are corrupted and "sfc /scannow" only gets about halfway before it says it couldn't load some resources then quits.

The "Windows 10 installation has failed" message appears not long after starting the installation when it says about 6%.

I've attached a screenshot of the failure message as well as disk manager and the Panther folder which is curiously unpopulated (there's nothing in the two folders shown above). The Panther folder doesn't contain any error logs. However, on a previous installation attempt, I looked at an error log and it showed that it was not able to copy something from the installation disc to a location on C:/windows.

I have installed Windows 10 without problem on a number of other machines, but I'm stuck here on this one. By the way, no external drives or devices are attached to the machine (other than the apple bluetooth trackpad and keyboard which have never been a problem on this and other virtual machines). I've run chkdsk on the virtual machine and the drive appears to be ok. I've tried doing this repair install from the DVD drive as well as by copying the .iso image to the desktop and mounting it in file explorer. The result is the same.

Thanks in advance for ... Read more

Read other answers
RELEVANCY SCORE 62

Hello everyone,

I am having a problem with XP. I clean installed and everything went fine. When I go to a site to play an online game, my system comes up with an error and/or reboots. The error says I don't have enough Ram and something about an error with JAVA. I have 512 ram right now. I took that out and put in my 256 chip to see if maybe the ram is bad and it looks as if both are fine. So I tried again and as it loads the game, poof, it auto reboots.

I never had this problem with ME.

Any help would be appreciated.
 

Read other answers
RELEVANCY SCORE 62

Hi,
Windows XP Home
IE6/Firefox 1.0.2
SP2
DSL Connection
JRE 1.5.0

"An unexpected error has been detected by HotSpot Virtual Machine:"

Hopefully someone can interpret this...HotSpot Virtual Machine error log...for me.

When changing games at Pogo.com, I've been getting occasional crashes from my Firefox 1.0.2.

It happened again tonight but, this time there was a file left on my desktop.
I used Notepad to open it and save it.
The contents of that log are in the link above.

I'm hoping that someone knowledgeable can interpret the log, identify what is
causing the error and possibly suggest a fix for whatever causes these
crashes.

This is the first and only time such a log has been left after a crash.

Thank you,

Telstar
 

A:HotSpot Virtual Machine Error log help

Read other 12 answers
RELEVANCY SCORE 62

#THIS KEEPS POPPING UP ON MY DESKTOP AS A NOTEPAD WHEN THE WINDOW CLOSES ON IT'S OWN....THIS IS ONLY 1 OF MANY.
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x3a707474, pid=2152, tid=1696
#
# Java VM: Java HotSpot™ Client VM (1.5.0_04-b05 mixed mode)
# Problematic frame:
# C 0x3a707474
#

--------------- T H R E A D ---------------

Current thread (0x0b981008): JavaThread "SocketConnection" [_thread_in_native, id=1696]

siginfo: ExceptionCode=0xc0000005, reading address 0x3a707474

Registers:
EAX=0x02c67858, EBX=0x00001c98, ECX=0x02c895d0, EDX=0x7c90eb94
ESP=0x0c91f080, EBP=0x0c91f0e0, ESI=0x02c68938, EDI=0x00000000
EIP=0x3a707474, EFLAGS=0x00010202

Top of Stack: (sp=0x0c91f080)
0x0c91f080: 02b16236 0c91f0dc 02b1ac2c 00000800
0x0c91f090: 05411f70 0c91f0e0 00000000 71ab61c9
0x0c91f0a0: 00001c98 0c91f0d0 00000001 0c91f0e8
0x0c91f0b0: 0c91f0f4 00000000 00000000 07296ef8
0x0c91f0c0: 02c63710 00000800 0b9810c4 00000001
0x0c91f0d0: 00000001 0c91f104 07296ef8 00000000
0x0c91f0e0: 0c91f908 6d4c69d5 00001c98 0c91f104
0x0c91f0f0: 00000001 00000000 1005bd08 10b85148

Instructions: (pc=0x3a707474)
0x3a707464:
[error occurred during error reporting, step 100, id 0xc0000005]

Stack: [0x0c820000,0x0c920000), sp=0x0c91f080, free space=1020k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C 0x3a707474
C 0x6d4c69d5
J java.net.SocketInputStre... Read more

A:HotSpot Virtual Machine error

Hotspot Virtual Machine is Sun Microsystems Java. The first thing to do would be check for viruses and other malware.Do you have an up to date antivirus program running on your computer? If you do, make sure the av program has had the latest updates, shut down the computer, then boot into safe mode and run a virus scan.If that doesn't turn up anything run a variety of available anti-malware programs.Freeware AntiSpyware and Security ProgramsSoftware firewalls with freeware versionsZone Alarm SE: http://www.zonealarm.com/Sygate: http://www.sygate.com/Antivirus programs - freeware (you can only use one resident anti-virus program on your computer. More than one will conflict)AVG: http://www.grisoft.com/us/us_index.phpAvast Anti-virus freewarehttp://www.komando.com/bestshareware.aspAnti-malware freeware (You can run as many of these as you wish. Generally there is no conflict between these and you should always run several)AdAware: http://www.lavasoftusa.com/software/adaware/Microsoft Antispyware Beta: http://www.microsoft.com/athome/security/s...re/default.mspxSpywareBlaster: http://www.javacoolsoftware.com/spywareblaster.htmlSpybot S&D: http://www.safer-networking.org/en/index.htmlMicrosoft Malicious Software Removal Tool (Win XP and Win 2000):http://www.microsoft.com/security/malwareremove/default.mspxA? - Free from http://www.majorgeeks.com/download4281.html . Run it, click Search for Updates, then click Scan.CWShredder from InterMuteCW Shredder removes some variants... Read more

Read other 1 answers
RELEVANCY SCORE 61.6

We have an Ovislink SR-500 router connected to a DSL connection with four computers. I want to access the virtual server menu (in web mode) so I can forward ports but instead of the menu, all I get is a long line of "y"s with umlauts on top of them. This also occurs in the users list menu but no other ones.
 

A:Can't access virtual server menu on Ovislink SR-500

Nevermind, it never occurred to me that a firmware upgrade would fix this. Thanks for looking anyways.
 

Read other 1 answers
RELEVANCY SCORE 61.6

Greetings

I am getting this error at startup on windows nt 4.0.

STOP CODE: c00000e5
SAM server has encountered an internal consistency error in its database. This catastrophic failure will prevent further operation of SAM
This is all on a blue screen
Does anyone have any idea how to fix?
 

Read other answers
RELEVANCY SCORE 61.6

the problem is i get this thing about MICROSOFT VIRTUAL MACHINE RUNTIME. on my CSTRIKE.EXE "abnormal termination"

and after i click ok..i get another error saying

"Instruction at XXXXXXXXX referenced Memory at 0X00000XX. The memory could not be read.

The program then terminates. "

i only get this when i play COUNTERSTRIKE..but with my other games its perfectly fine

Application exception occurred:
App: C:\Sierra\Counter-Strike\cstrike.exe (pid=1588)
When: 2/16/2003 @ 16:48:34.564
Exception number: c0000005 (access violation)

*----> System Information <----*
Computer Name: JUSSAREN
User Name: Aren
Terminal Session Id: 0
Number of Processors: 1
Processor Type: x86 Family 6 Model 3 Stepping 1
Windows Version: 5.1
Current Build: 2600
Service Pack: 1
Current Type: Uniprocessor Free
Registered Organization: JussAren
Registered Owner: Aren

*----> Task List <----*
0 System Process
4 System
460 smss.exe
520 csrss.exe
552 winlogon.exe
596 services.exe
608 lsass.exe
776 svchost.exe
828 svchost.exe
940 svchost.exe
1004 svchost.exe
1224 Explorer.EXE
1252 spoolsv.exe
1416 evntsvc.exe
1660 crypserv.exe
1676 dcfssvc.exe
1728 nvsvc32.exe
1864 svchost.exe
1588 cstrike.exe
228 drwtsn32.exe

*----> Module List <----*
(0000000000320000 - 00000000003c1000: C:\Sierra\Counter-Strike\WONCrypt.dll
(0000000000400000 - 0000000004028000: C:\Sierra\Counter-Strike\cstrike.exe
(0000000004030000 - 000000000439a000: C:\Sierra\Counter-Strike\vgui.dll
(000000000581... Read more

A:Geforce4mx420/Runtime Virtual machine ERROR..help!

Read other 11 answers
RELEVANCY SCORE 61.6

I can't get rid of this popup every time I open my pc.
I have tried everything.
Here's the error :

Java Virtual Machine Launcher
Error : could not open 'C:\Program Files\Java\jdk1.6.0_21\lib\amd64\jvm.cfg

There is no amd64 folder in the jdk1.6.0_21

Thank you.
 

A:Java Virtual Machine Launcher error

I don't actually know the answer to your problem, but there may be a clue in the error message where it refers to ' jdk1.6.0_21\lib\amd64\jvm.cfg' .

JDK refers to the Java Developers Kit, which is only needed if you intend to develop your own java applications or applets (see the explanation on the Sun download page;http://www.oracle.com/technetwork/java/javase/downloads/index.html). If you aren't a developer you probably have the wrong type of Java installed which is looking for a component you don't have.

As the JDK also includes the JRE that end users need, you probably don't need to do anything until you upgrade to the next JRE version when the next security scare turns up! If the popup is too irritating, I suppose you could uninstall the JDK and replace it with the JRE (although there are a few threads around here where people are having problems with Java uninstall and reinstalls).

As a matter of interest, do you by any chance have an AMD 64 bit processor, since that is the other thing the error message appears to mention?
 

Read other 3 answers
RELEVANCY SCORE 61.6

On startup this error always comes up from "Java Virtual Machine Launcher" saying "program could not find the main class, program will exit". its really annoying i wondered if anyone knew how i could get rid of it?

i have windows xp home edition
i have no idea what program this is coming from although i think it might be something to do with limeshop because when i try and uninstall that the same error message comes up. (limeshop that comes with limewire)

if anyone can help that would be great!
 

Read other answers
RELEVANCY SCORE 61.6

Ok, I purchased a game called Minecraft for my daughter this morning and have so far been unable to use it.

When we tried to download and run it, an error message appears that says:

'Error: Could not create the Java Virtual Machine.'
'Error: A fatal exception has occurred. Program will exit.'

I really do not have a clue what this means, I would really appreciate any help or advice. I'm not technically minded at all so please go easy on the jargon!!

Thanks all
 

A:Error message: Java Virtual Machine

Go here to verify Java Version: http://javatester.org/version.html
what version do you have?

go here: http://javatester.org/enabled.html and report what it says
In the LIVE box: what does it say?
 

Read other 1 answers
RELEVANCY SCORE 61.2

Hi i have installed Windows 7 64Bit  Enterprise edition. installation went smooth without any errors. i have downloaded RSAT  64bit from http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7d2f6ad7-656b-4313-a005-4e344e43997d#filelist when i run the installation i get"Installer encountered an error 0x80246002"Event Viewer shows following errorWindows update "Update for Windows (KB958830)" could not be installed because of error 2149867522 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\User1\Desktop\amd64fre_GRMRSATX_MSU.msu"        ")i have gone through some threads and looks like nothing much is out there with specific error code.the closest one i could find washttp://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/800b8038-0a86-4643-8616-21e8e50ea9ac however i can't find the key mentioned in #7 of Step 2 by Judi collins. Obviously because RSAT never got installed.i am clue less here and any help will be really helpful.Also i have tried repairing windows 7 installation using repair option.

Read other answers
RELEVANCY SCORE 61.2

I've tried hosting a server for an indie computer game called Minecraft using the following .jar file
http://minecraft.net/download/minecr...=1284392596463
and while it works, I've been unable to allocate more than 1 gig of memory to the program.

Running the .jar file by itself leaves a very small amount of memory, which is tracked on the server window as "Memory use: # mb (% free)

The support forum for the game suggests using a .bat file with the following line:
"C:\Program Files (x86)\Java\jre6\bin\javaw.exe" -Xmx1024M -Xms1024M -jar minecraft_server.jar

This does increase the amount of memory, and while I should be able to increase the "1024" values to use even more, this is where I run into problems. Using "2048" or any other value in this .bat line produces an error stating:
"Unable to run virtual Java machine"

I've asked about this on the game's forum, and the only response I've gotten was from other Vista 64 bit users that have the same problem and are unable to solve it. Any thoughts?

Read other answers
RELEVANCY SCORE 60.8

Hi,
We are running our Domain Controller and Active Directory in the cloud. All our users use their AD account to log onto their computers and this has been working fine for the last few years. Today an employee needed to change their password and for some reason
they get the error: "Configuration information could not be read from the domain controller, either because the machine is unavailable, or because access is denied".
After trying it several times, always with the same result, I checked to make sure that the DC/AD was available. After that, I manually entered the DNS of our DC to make sure that it wasn't just a network error. That didn't change anything though. Then I
used my account to log onto his machine and I was able to change my password with no problem. That made me think that this must be an issue with his account but when I checked it, the permissions were all set correct.

After researching this error online and finding no helpful answer that explains why this is happening and how to fix it I'm stuck. Does anybody know why this is happening? And does someone know how to fix this?
With kind regards,
C. Zerbe

Read other answers