Over 1 million tech questions and answers.

Windows fails to wake from sleep, then corrupts boot

Q: Windows fails to wake from sleep, then corrupts boot

Hi,

I am running Windows 7 Pro x64 and I am having an issue where my computer goes into sleep mode, fails to wake from sleep, strangely resumes its state once I do a cold restart, and then after restarting again, refuses to boot.

Here is what's happening step-by-step:
Computer goes to sleep based on the time set in the Balance Power options scheme. Fine. Often, computer wakes up perfectly fine from moving the mouse or pressing a key. Fine. Very occasionally however, upon waking up the computer, the lights, keyboard lights, fans and everything else except for the display comes on. I am forced to do a cold shutdown by pressing the reset button. Upon booting up, Windows displays "Restarting Windows" rather than "Starting Windows" and resumes its state when it went to sleep. Strange but OK. Everything seems to work normally. The problems come in when I then do a shutdown or restart after it has resumed from the cold shutdown. The computer shuts down perfectly fine but during the next boot, freezes right during the animation of the windows logo and immediately restarts the computer and launches into the DOS-looking prompt asking whether I want to do a Startup Repair because the computer failed to boot.

I have tried Startup Repair from HD and from the Windows disc and neither have done anything. I am usually forced to just reformat everything and start anew. This problem recently started occurring after I installed an Intel X-25m 120GB ssd and put the Windows partition on it. I'm not sure if that's related to the problem. Also, all of my power options are set to the Windows default.

My hardware is:
CPU: Intel Core 2 Duo E6600 factory 2.4Ghz
RAM: Corsair Dominator DDR2 4x1GB
HDD: Intel X25m SSD 120GB (Windows) + Seagate 400GB HDD (everything else)
Mobo: Intel DG965OT
Video: ATI HIS Radeon HD 5770

This has become a major issue for me and I would like to avoid going through the hassle of reformatting every 2 weeks. I really really really appreciate any input you have in helping me solve this problem. thanks!

RELEVANCY SCORE 200
Preferred Solution: Windows fails to wake from sleep, then corrupts boot

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Windows fails to wake from sleep, then corrupts boot

Hi,

I just recently got hit with a similiar problem, it unfortunately resulted in a corrupted BIOS that is unrepairable, it ends up locked in a low power state. There is no one single reason why Windows fails to wake up, and it's kind of a common problem. From the research I've put into it, hardware and the version of Windows does not matter. You'll either suffer from it, or you won't. My recommendation would be to disable both your display and PC sleep settings, and stick to manually shutting down and a screensaver to completely avoid it before any possible hardware damage is inflicted, and until there is more information available on it. The CPU, mobo and PSU are the most likely to become damaged.

If you still wish to use Sleep, make sure all your drivers are up to date, along with Windows, might make a small difference.

If you have another system available to you, or are able to borrow a mates, go ahead and use it to test your hardware for faults incase your situation is hardware based, and not failed coding on Microsoft's part. Also on that note, try removing your SSD for a week or two (or however long it usually takes before your system decides to sleep in) and see if it solves it, and post back with results.

I would still keep an eye on here, no less, incase a solution comes to light. Go ahead and do some Google searches on the issue, the plethora of possible fixes people have tried may work for you.

If possible, can you recall anything else you have done before, or just as the problem started occurring? Also, have you noticed your PC self-waking on occasion?

- Ryuku

Read other 3 answers
RELEVANCY SCORE 87.6

My PC is fairly new and I'm having problems with slow shutdowns/restarts and slow sleep/wakes. Recently it seems to fail waking altogether and restarts after a while instead. Usually during waking I just have a black screen for a long time before the reset/restart but sometimes I see the Windows log-in screen but it's unresponsive.
The problem predates my CPU undervolting and doesn't seem to change when I switch RAM settings back to Auto instead of XMP (I my RAM necessitates some kind of overclock in order to function at its rated speed).

Can anyone advise how to proceed? Thanks.
System specification below. This forum has a fantastic design that eliminates the form of pasted lists of information. That's just great for preventing people from reading it. I was worried someone might have read this information.
OS: Win 10 Pro 64-bitMainboard: ASUS Z170 Pro GamingCPU: Intel i7 6700 (6th gen), Stock HSF, Undervolt Offset -0.15 V, LLC 4RAM: Corsair LPX Vengeance 2x8GB DDR4-3000 (CMK16GX4M2B3000C15)Graphics: Gigabyte NVIDIA GeForce GTX 950Sys Drive: Samsung Evo 750 SSD, 250 GBData Drives: OCZ Vertex 2 SSD, 60 GB; WDC WD1002FAEX-00Y9A0, ~1 TB; WDC WD2003FZEX-00Z4SA0, ~2 TB; WDC WD2002FAEX-00MJRA0, ~2 TB; RAID 0, ~300 GB [Maxtor 6B160MO x 2]PSU: XFX TS 750W (P1-750S-NLB9)Bluetooth: Parani UD100 Bluetooth USB AdapterMonitor: LG 21.5" W2246S-BF 16:9 Wide LCD Monitor 1920x1080 5msLogitech G500 mouse, K120 keyboard.UEFI BIOS divergence from optimised default settingsAI Overclock Tune... Read more

Read other answers
RELEVANCY SCORE 82.4

Hi there,

I am running a Windows 7 64-bit setup, and I'm trying to get a timer to wake Windows from sleep or hibernation.

I've got it to work flawlessly on my desktop, however on my laptop, a Dell D630, I can't seem to get it to work. I've created a task triggering on a specific time and running the operation '/c "exit"', which should just start a command prompt and close it again. I've set it to "run with highest privileges" and "wake the computer to run this task". However, it just doesn't boot as scheduled.

The history of the scheduler says nothing at the moment that the trigger is set to go off, but a minut later (probably when I manually boot) I get a "Task scheduler "{....}" instance of the task "\Wakeup" due to a time trigger condition."

What can I do to fix this?

Thank you.

A:Scheduler fails while trying to wake Windows from sleep/hibernation.

Hello and welcome to Seven Forums.

Some things you can try for testing:

Turn off "run with highest privileges" - you shouldn't need it for this task

Try different setting combinations for:
"Run whether user is logged on or not" / "Run only when user is logged on"
"Start the task only if the computer is an AC power"
"Stop if the computer switches to battery power"

Compare each page in the Task settings between the Desktop and Laptop.
See if you can find some different setting(s) that might cause this.

If you logon with a Standard account when the computer sleeps, try using an Admin account.

Hope this helps,
David

Read other 3 answers
RELEVANCY SCORE 76

Windows 7 pro, desktop, 2 internal sata hd

Read most of the many threads on this subject. I have turned off Sleep using Control Panel, Editing the Registry, disabling hybrid computer as described in this forums tutorial.

The Start/Sleep button is not grayed out and still shuts down the computer although the automatic timed sleep mode seems to be eliminated. Moving or clicking the mouse does not wake up the computer as originally. I have to remove the power cord for a few minutes and then press the power button. I think the computer then comes back up w/o the windows sign-on window as if awakening from Sleep. Windows 7 initializtion is very slow.

Problem with Sleep arose after installing an external drive enclosure with a sata hd and using the esata interface which did not work and caused loss of 2nd internal hard drive.

I do not mind the automatic sleep mode if the computer would awaken properly.

Forgot to mention the following: Even though the Sleep recovery does not work, the computer responds to Restart and turn on from power shut down normally in its usual quick fashion.

Sinchi

A:Fails to wake from Sleep

Remove external drive ,drivers

Read other 2 answers
RELEVANCY SCORE 75.2

Hello, I have 3 HDDs on my PC. Two WDC 640 GB Blacks (manufacture date June 2009) and a 1 TB Black (manufacture date November 2009). I use the 1 TB Black for storing my documents while the two 640 GB Blacks are for OS/Apps and Scratch files respectively.

The problem is when I wake up the PC from S3 sleep mode. The 2 640 GB Blacks spin up fine and I could get to the desktop but the 1 TB Black fails to start. Has anyone had issues similar to mine? Any suggestions?

Motherboard is a Gigabyte GA-55P-UD4PA.

Thanks!

A:1 TB WDC Black fails to wake from sleep

  
Quote: Originally Posted by cyclo


Hello, I have 3 HDDs on my PC. Two WDC 640 GB Blacks (manufacture date June 2009) and a 1 TB Black (manufacture date November 2009). I use the 1 TB Black for storing my documents while the two 640 GB Blacks are for OS/Apps and Scratch files respectively.

The problem is when I wake up the PC from S3 sleep mode. The 2 640 GB Blacks spin up fine and I could get to the desktop but the 1 TB Black fails to start. Has anyone had issues similar to mine? Any suggestions?

Motherboard is a Gigabyte GA-55P-UD4PA.

Thanks!



Hii and welcome

Are the HD's external? and USB?

Read other 6 answers
RELEVANCY SCORE 73.6

but not after a short period?

Hello to all

I have set up a windows 7 x64 machine as a file server for my htpc in the lounge.
Now to save pennies i have set it to sleep at night and then wake in the mornings so its up and ready for the music and movies to be present for the htpc.

Now if i manually run the scheduled task to set the machine to sleep and set the wake schedule for ten minutes later, it wakes fine. But if i run the schedule as it should at night, the system never wakes in the morning and neither will the mouse let me? i have to press the power button for it to come back to life like its hibernating. But i have disabled hibernate using the following link.

I have a step by step guide as to what i have done in regards to both sleep and wake schedule here.

Any advice would be greatly received and tested asap, also when the kids have has their showers and in bed i will provide specs of that system if its going to help.

A:Fails to wake from a scheduled sleep after a long period -

been looking at the event viewer logs and found this -


But the computer doesn't actually wake ?

Read other 4 answers
RELEVANCY SCORE 73.6

For years I have had dual monitors working fine in my Win 7 machine. Then a few months ago I started having problems when the computer turn on or wakes from sleep mode. The primary monitor turns on then switches off after a second. The only remedy is to
turn off the monitor, turn on, and repeat until finally the monitor stays awake.

I have tried shutting down the computer and starting using the system restore disk - the monitor does not come on. 
I tried installing a replacement video card (and turning off the motherboard video support) the problem is the same. This indicates it is not the video driver or physical video chip.

Read other answers
RELEVANCY SCORE 67.2

W7 PC wakes up from sleep every few minutes. It didn't use to. I am the builder / owner / sole user. Investigation done so far at the DOS prompt to establish the cause:

powercfg -devicequery wake_armed
(no results returned)

powercfg -waketimers
There are no active wake timers in the system

powercfg -lastwakeWake History Count - 1
Wake History [0]
Wake Source Count - 0Other ideas to try and establish the cause with please?

Many thanks.

Read other answers
RELEVANCY SCORE 64

Our machines, when they sleep, then try and wake up again, get a "no boot device found" error.  reboot, it goes into diagnstics.  Reboot again, it goes into attempting bootp. Reboot again, it starts windows 10 normally. I have turned off all os options with regards to sleep (high power power mode, turned off hybrid sleep, turned off "turn off hard drive after" etc..._)  all to no avail. Any ideas?  Thanks update: found we had a slightly older bios, so I'mgoing to see if that helps (.012 vs.014)

Read other answers
RELEVANCY SCORE 64

I'm new to sevenforums and would appreciate the help of some of you. I have updated my user profile with all of the details and specs of my system that is having my issue.

Recently, my computer will not wake up from sleep mode. Once it enters sleep mode, the only way to get it functioning again is to hold the power button, completely shut it off, and then boot my system back up.

It appears as if everything starts back up once I open the lid or press the power button to wake it up, but the screen never turns back on. The fan starts up, the backlit keyboard lights up, the leds all blink, but nothing I try will turn the screen back on forcing me to press and hold the power button for a complete shut down.

I have reinstalled the latest Intel HD Graphics driver as well as the latest NVIDIA graphics driver (both the stable and beta release).

I do not get a blue screen or any sort of error. Upon the restart, I am not prompted with any error from windows or any signs of the forced shut down. I have been messing with this issue for a few days now and am asking for some help from the community here at sevenforums. If you need any additional info let me know.

Thanks.

A:Computer will not wake from sleep, hard boot only solution

Try the steps here: Sleep Mode Problems - Vista Forums

I would also work through the Troubleshooting Steps for Windows 7

Report back the results you find for more steps indicated.

As a last resort use the tool the pro's use to find the exact cause: Gathering a Startup, Shutdown, Sleep, Hibernate, or Reboot Trace - Windows 7 Forums

Read other 1 answers
RELEVANCY SCORE 63.6

When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time but not all of the time. I want it to wake the PC every time, with 100% reliability. (When the PC is up and running, the modem and the machine receive faxes beautifully.)

What do you suggest?

Modem: Conexant D850 PCI V.92 Modem with recent driver update to version 7.67.0.50 (7/3/2007) (but this problem is the same now as before with the 2004 driver version)
PC: Dell Optiplex 755
Processor: Intel Core 2 Duo E4600 @ 2400 MHz
RAM: 2GB, of which 1.4GB is usually free
BIOS: A14
OS: WinXPPro SP3 with all updates
AV: Avast Home Free
Anti-spyware: SpywareBlaster Free, Spybot S&D Free and AdAware Anniversary Free
Fax software: MS Fax Console that comes with WinXPPro SP3
Printer/Fax Printer: HP OfficeJet Pro 8500 Wireless AIO (model A909g)
Screensaver: XP logo after 9 minutes; do NOT show welcome screen on resume
Power Settings: Home/Office Desk; Turn Off Monitor after 10 mins; Turn Off Hard Disks Never; System Standby after 20 mins; System Hibernates Never; Do NOT prompt for password when computer resumes from standby
Home network Ethernet connection: Intel(R) 82566DM-2 Gigabit Network Connection card with all Wake on LAN settings ON.
Browser: Firefox latest but use IE occasionally when necessary
Email: MS Outlook Express 6 to POP3/SMTP email service
Misc: I also run LogMeInFree version 4 on all my home computers

Thank... Read more

A:Wake on Ring problem - Fax modem fails to wake PC reliably from standby

I may not be able to help, but I am curious - is this a dedicated telephone line?

If not, what services do you use, like call forward, messaging, call waiting, etc.

Or does the dedicated line have anything like that that you know of? (or didn't know of)

Read other 9 answers
RELEVANCY SCORE 63.2

When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time but not all of the time. I want it to wake the PC every time, with 100% reliability. (When the PC is up and running, the modem and the machine receive faxes beautifully.)

What do you suggest?

Modem: Conexant D850 PCI V.92 Modem with recent driver update to version 7.67.0.50 (7/3/2007) (but this problem is the same now as before with the 2004 driver version)
PC: Dell Optiplex 755
Processor: Intel Core 2 Duo E4600 @ 2400 MHz
RAM: 2GB, of which 1.4GB is usually free
BIOS: A14
OS: WinXPPro SP3 with all updates
AV: Avast Home Free
Anti-spyware: SpywareBlaster Free, Spybot S&D Free and AdAware Anniversary Free
Fax software: MS Fax Console that comes with WinXPPro SP3
Printer/Fax Printer: HP OfficeJet Pro 8500 Wireless AIO (model A909g)
Screensaver: XP logo after 9 minutes; do NOT show welcome screen on resume
Power Settings: Home/Office Desk; Turn Off Monitor after 10 mins; Turn Off Hard Disks Never; System Standby after 20 mins; System Hibernates Never; Do NOT prompt for password when computer resumes from standby
Home network Ethernet connection: Intel® 82566DM-2 Gigabit Network Connection card with all Wake on LAN settings ON.
Browser: Firefox latest but use IE occasionally when necessary
Email: MS Outlook Express 6 to POP3/SMTP email service
Misc: I also run LogMeInFree version 4 on all my home computers

Thanks.

A:Wake on Ring problem - Fax modem fails to wake PC reliably from standby - how to make 100% reliable?

Please see more details (and post your reply) at http://www.bleepingcomputer.com/forums/ind...hl=wake+on+ring(By the way, I'm up to BIOS A16 but does not help.Thanks.

Read other 1 answers
RELEVANCY SCORE 61.6

this is the second time this has happend. i have a very clean windows 8.1 install

just today i push the power button to put to sleep. HDD is active like 5 minutes. i finally push power until system shuts down. now when i try to start win 8.1 is goes through system recovery & goes through the whole blah blah about options to repair your windows BS.

the error message at the core of the error is "volume Shadow copy backup failed timeout" and this end up jacking my install.

im going to turn off system restore unless someone has a solution

Read other answers
RELEVANCY SCORE 61.6

Hi,

I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this.

My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps for an hour, it's OK.. but if you leave it sleep all night and try to wake it up in the morning, it's quite cranky. After the 5+ minute wake up, it performs as normal. It was running Windows 7 Home 32 bit.

Troubleshooting steps that I have taken are as follows.

Reinstalled windows. Issue was resolved! but after about 2-3 weeks, issue came back. I thought maybe it was some type of windows update, so I reinstalled windows again and paid closer attention to the updates. Issue presented itself again after 2-3 weeks, and there were no updates immediately done prior to it starting.

I started to think maybe it was something related to my hard drive, so i performed laptop surgery and swapped out my original hard drive with a solid slate drive, and installed windows 7 Ultimate 64 bit (this laptop can support 64 bit so I figured why not upgrade.).

issue again was resolved for a few weeks, and now it's back to taking 5+ minutes to wake up again.

If you're turning the laptop on from scratch, it takes 10-15 seconds tops. if you're restarting, it's 10-15 seconds tops (man, I love SSD...)... if you're waking itup within the hour, its 1-2 seconds. But anything longer then that, 5+ minutes.

It ba... Read more

A:Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake

Hi there, have you ran any malware/anti virus scans?

Read other 9 answers
RELEVANCY SCORE 61.2

I have a Dell Optiplex 755 with WinXPPro SP3, 2GB RAM and an Intel Core 2 Duo E4600, and it is unreliable for Wake on LAN and Wake on Ring. I also wonder whether my Standby - Sleep - Suspend (S1 or S3) is working correctly.

When the PC is in Standby - Sleep - Suspend mode (S1 or S3), Wake on LAN and Wake on Ring work some of the time but not all of the time, and I'd like them to be 100% reliable.

These may be two different problems, but your advice will be appreciated. (Also, if I should post in a different forum, please advise.)

My Network Card is an Intel 82566DM-2 Gigabit Network Connection, and I recently upgraded its drivers using "generic" PROXP.exe from the Intel website, although this has not helped the problem. The specific driver file e1e5132.sys is now from 2009 -- it used to be from 2007. But, as I say, Wake on LAN from Standby was not and is still not reliable, both before and after the driver update.

In Settings .. Network Connections ... Local Area Connections ... Properties ... Configure ... Power Management, all the Wake on LAN options are checked ON:

- Wake on Directed Packet
- Wake on Magic Packet
- Wake on Magic Packet from Power Off State
- Wake on Link

The NIC card's Diagnostic checks are all OK.

My fax modem card is a Conexant D850 PCI V.92 Modem, and I have the most recent drivers dated 7/27/07, version 7.67.0.50. In Settings ... Phone and Modem Options ... Modems ... Properties, "Allow this device to bring... Read more

A:Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

More to above: Dell has suggested I must re-install Windows. I've never done that, and I realize I'd probably lose all my applications and data - no good. Seems to me that's like using an atomic bomb to kill a mosquito. And why should I assume that will work?

But is there a way to re-install -- or maybe fix -- Windows that leaves everything else safe?

FYI - About a month or so ago, I ran SFC (System File Checker) in repair mode, and that didn't help with this problem.

Any ideas?

Read other 1 answers
RELEVANCY SCORE 60

I am using hp AY008TX when it on sleep, the  windows does not wake up, blur lines appear and backlight is on but it does not wake up.please guide me to sort this issue as i have reinstalled operating system still the problem is same.

Read other answers
RELEVANCY SCORE 60

Last few day windows been waking up by itself randomly, here's the screen shot of the problem, nothing's been touch when woke up from sleep either(mouse, keyboard)

A:Windows 7 wake up from sleep alone

Looks like Media Center update requested the wake.

Read other 2 answers
RELEVANCY SCORE 60

Hi

I've been searching for a while now trying to resolve this problem. There are loads of threads and I've tried loads of solutions like uninstalling and reinstalling drivers etc.

The situation I have is that Windows will sleep and wake perfectly fine if I use the remote that came with my TV tuner card but nothing else. If I try to wake it using the wireless USB keyboard I have it appears to power up but nothing happens. The power light goes from flashing to soluid but there doesn't appear to be any other movement. Equally when Windows Media Centre tries to wake to record it does the same thing.

Are there any suggestions of what I can try and what should I look at (and / or post here) to try and help debug?

Thank you in advance
Dean

A:Windows 7 won't wake up from Sleep

Dean,
Sometimes the batteries in my wireless mouse and keyboard go dead. Check those first.
I never have put my computer in sleep. I either use it or shut it off. IMO
Do a search in upper right hand corner for Windows Media problems.
Someone will probably be along to add other input so stay tuned.

Read other 3 answers
RELEVANCY SCORE 60

Dell XPS 8700 BIOS A11 7/9/2015
Windows 7 Professional 64 bit
This is a recent problem. Windows will not wake up from sleep mode and when I force a restart Windows appears to start (resuming Windows), but then there is a blank screen and the system is locked up. I have checked all of the power settings and the mouse and keyboard are enabled to restart the system.
Any ideas?
Thanks,
Charles

Read other answers
RELEVANCY SCORE 60

Hi Guys,
would like some help/advice please. I have installed Win7 clean install on my computer, my problems is that if I leave mu computer for say 30+ minutes windows goes to sleep/hibernates and I find it hard to wake up normally have to reboot.

I have been through all the power management settings, and selected Never to all the selections in the advanced section, also in my power plan. I have even formatted my Drive and reinstalled win7 but still have the same problem.

When it is asleep, I have a halfmoon key on my keyboard, I have tried pressing this to wake it up but to no avail, also pressed the main power button, but this normally shuts it down.

Is there anything I can do to stop this happening, run a small program to keep it awake, or alter something in commands to stop it.

Your help and advice is really appreciated
Thanks and Regards
Bob

A:Windows goes to sleep and won't wake up

Hello metro5053, welcome to Seven Forums!



Have a look at the tutorial at the link below to see if you can find something that may help you resolve your issue; though it says Vista the principal is the same with Windows 7; be sure to keep us informed as to how it sorts out.

Power Options and Sleep Mode Problems - Vista Forums

Read other 9 answers
RELEVANCY SCORE 60

7 has been running perfectly since I installed it Jan. 2. Around Feb. 10 I noticed that I could not wake it from sleep, I would have to cut power, wait a bit, and then boot. When it boots however, it will prompt that it is "resuming windows" like it had been sleeping. All windows updates are installed and I have Panda Antivirus running along with Spybot (both show no infections or errors). I looked in the action center for errors and got the following message:



I think this is the problem, there were about 12 other listings of the error.

I'm not sure if it's just that my bios needs to be updated or what, so I'm just looking for any suggestions on what to do. (My bios hasn't been updated yet since the install of 7)

Some Specs:

MOBO is an ASUS P5WDG2 WS Professional
Dual Core 2.6ghz
6 gigs of RAM
8800GTS (driver version is 8.17.11.9621) aka 196.21
Creative SB Audigy 2 ZS (yeah, it's old)
[also I have a USB keyboard and a Bluetooth mouse that uses a USB dongle to connect]

Any help is appreciated!

A:Cannot Wake From Sleep in Windows 7 x64

*bump*

Read other 3 answers
RELEVANCY SCORE 60

My box is windows 8.1 enterprize x64, and I got a problem that don't wake up from sleep.

I attached three screenshots of event viewer. And for other informations you need, please explain and specify easily so that I can make it, and please understood I am not an expert.

Thanks in advance.

Read other answers
RELEVANCY SCORE 59.6

When my Windows 10 system goes to sleep ESCape or POWER button does not get it woken up from sleep. I need to give it a hard reboot (8 seconds press of power button) and restart the system.
Hardware: HP Probook
Any solutions please?

Read other answers
RELEVANCY SCORE 59.6

My computer running windows 8 and it cannot wake from sleep most of the time. When I built this computer last year, it can wake from sleep 9/10 times. However, now, almost every time I try to wake my computer from sleep, it crashes. This is what I notice when the computer is about to crash when waking from sleep: Power button is pressed, GPU fans and direct PSU connected fans spin up. Fans connected to Mobo do not spin up. Power button continues to blink even as if still asleep.

I strongly suspect it's the Mobo that is causing the sleep problems. The Mobo have been dropped and 6 out of the 10 sata ports do not work properly. I tried different bios versions and the latest version, and reset all values to default( no oc, xmp), and sleep problems still exist. The PSU and GPU have been tested with another setup with no problems. I tried another operating system and same sleep problems exist. Windows mem. diagnostics passed. Before I go out and buy a new mobo, I want to be 100% sure that my problems are caused by my current mobo.

Read other answers
RELEVANCY SCORE 59.6

Hi everyone. I'm new to the forum. Just bought a Windows 7 PC today. After setting it up, it looks as if Windows 7 takes longer to sleep and wake up than Vista. Here's how I compared the two:

1) We have a recently purchased HP running Vista, 8GB DDR3 RAM, 1 TB hard drive, and an AMD Phenom II X4 910 processor. With just Windows and Firefox running, the computer takes 6 seconds to sleep. Wake-up takes just under 5 seconds.

2) Today, we purchased the latest version of the same HP computer -- so the same processor, RAM, etc., but running Windows 7 (by the way, it's a long story why we have two of the same in our house). With just Windows and Firefox running, the computer takes more than 3 times as long to sleep -- 20 seconds. Wake up takes just over 10 seconds.

Any ideas what might account for this? Certainly, the operating system is different, but I guess I was expecting basic Windows functions to be faster, or at least as fast. Would anyone with Windows 7 mind timing their sleep and wake-up modes? I'd be curious to know if your sleep/wake times are similar. Thanks.

A:Windows 7 Seems Slower to Sleep and Wake Up

This has had several threads. You might want to use the search at the top of the page and read through some of them. I don't kknow you'll find what your looking for but it's a start. Fabe

Read other 9 answers
RELEVANCY SCORE 59.6

Can someone help please?  I literally just got my Flex 3, with Windows 10 and it won't wake from sleep.  I have to hard power it off then restart it.  I have read forums and changed all my settings so that it neer goes to sleep, or I hybernate it, or just turn it off when I am done, but that isn't really a solution, it's just a bandaid.  I also read about updating the intel graphics drive, which I did and it fixed it for about a week but now it is back to the same thing and won't wake from sleep.  Can anyone help please?  I love my Flex but not waking from sleep is quite annoying as I don't want to just leave my computer off or on at all times.  I use it frequently and don't want to have to shut it down or just leave it on every single time I don't use it.

Read other answers
RELEVANCY SCORE 59.6

Hi,

I've recently been having problems with my computer having BSOD after a few minutes whenever it is woken from sleep/hibernate.
I have run memtest 86 and everything came back fine.
I have updated to my latest mobo BIOS.
I have updated my video card driver.
But still the problem remains, I have attached my dump file and my system details are as follows:
-Windows 7 Home Premium 64-bit
- AMD Phenom 9650 Quad-Core 2.3Ghz
- 4GB RAM
- Motherboard ASRock K10N78FullHD-hSLI R3.0
- Integrated Nvidia GEForce8 series 512MB

I have googled the symptoms so many times but cannot seem to find anything that works, any help would be greatly appreciated.

Thanks,
Phil.
 

A:Windows 7 BSOD on wake from Sleep

Read other 7 answers
RELEVANCY SCORE 59.6

HelloI have windows 8.1 and noticed that my pc wont wake up from sleep after a long time. For example afte 10-20 minutes it wakes up. But after 1 hour it wont wake up. Even if i disaple sleep mode, the monitor wont wake up.I have tried sever things that found online thought I have not yet been able to solve the problem..Any ideas??Thanks!

A:Windows 8.1 wont wake up from sleep

Have you tried hitting the power button.
It varies from one machine to the other, but I have a few here that react that way.

Read other 4 answers
RELEVANCY SCORE 59.6

Hello,

I'm uploading the report for this issue. I've had several BSOD's from sleep, during (after I had walked away from this system), and after installing Quickbooks.

This is a brand new system with Office 2007, Acrobat X, Virus Scan Enterprise 8.8, and Quickbooks

I did all the Microsoft updates prior to installing Quickbooks

Any help is appreciated,

Thanks,

Kimrell

A:BSOD windows seven wake from sleep

Welcome To SevenForums.

McAfee is a frequent cause of BSOD-s (specially in the situation you describe). Consider uninstalling it with the McAfee Removal Tool and replace with Microsoft Security Essentials (To test)How to uninstall or reinstall supported McAfee products using the Consumer Products Removal tool (MCPR)McAfee Removal Tool - McAfee Uninstaller

Microsoft Security Essentials. Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
Microsoft Security Essentials - Free Antivirus for WindowsMalwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computerGood and Free system security combination.


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Perform a System File Check:Click on the start
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Disk Check on your hard drive for file system errors and bad sectors on it:Disk Check
Reduce items at start-up. Nothing except anti-virus is required:Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
e1c62x64.sys Intel(R) 82579V Gigabit Network Connection driver which you... Read more

Read other 4 answers
RELEVANCY SCORE 59.6

The only way my pc wakes up from sleep is by pressing the power button. The keyboard/mouse will not wake the pc up from sleep.

I have tried all the troubleshooting/Youtube tips/device manager settings and nothing will wake my system from sleep, other than the power button.

I also tried a different keyboard/mouse which plugged into a USB port and that would not wake my pc up either.

I also tried different power options settings and nothing worked.

Here is my hardware list: ASUS Z87 Deluxe/Quad motherboard with 16 gigs of RAM; Samsung 950 PRO M.2 SSD plugged into a PCIe slot (used ASUS M.2 X4 adaptor); cpu is the intel i7-4770K; video card is the AMD Radeon HD7700.

So I was wondering if there are any other tips which would get my keyboard or mouse to wake my pc up from sleep?

I don't want to wake it up from my smart phone.

thank you.

Read other answers
RELEVANCY SCORE 59.6

Installed Windows 8 about a week ago - it worked fine for a few days but now crashes/restarts upon wake up from sleep. There is a 'Kernel Power 41' in the Event Viewer log. Have attached the Diagnostic Tool output file for reference. Really appreciate the help.

A:Windows 8 crashes on wake up from sleep

Download and update AMD Catalyst for your ati radeon hd 5570. The latest version is 1/23/2013, yours is dated 12/19/2012Temporary uninstall AVG anti virus completely

Read other 2 answers
RELEVANCY SCORE 59.6

Hello

I have windows 8.1 and noticed that my pc wont wake up from sleep after a long time. For example afte 10-20 minutes it wakes up. But after 1 hour it wont wake up. Even if i disaple sleep mode, the monitor wont wake up.

I have tried sever things that found online thought I have not yet been able to solve the problem..

Any ideas??

Thanks!

A:Windows 8.1 wont wake up from sleep

hello ,it maybe be that the harddrive is set to turn off and you are not doing the right function to trun it back on ,try settin to not turn off ,see pic

Read other 5 answers
RELEVANCY SCORE 59.6

Hi!

Recently i brought an HP dv6-3180sp Laptop and format the hard drive and install my version of Windows (Windows 7 Ultimate x64).

But i have a problem with the Sleep mode in my computer.

When i put it to Sleep when open the lid the Biometric device to login does not work and if i insert the password i receive a empty screen.

If I want to work again i need to force a shut down. And power on again.

I don't know how to resolve this trouble.

Someone can help me?

Regards,

cs.oyen

A:Problem When Windows Wake Up from Sleep

Someone?

Read other 7 answers
RELEVANCY SCORE 58.8

sometimes the computer wakes up just fine - sometimes not. is this a windows 7 issue or is the computer at fault. cutting it off, then back on always works (so far)
Flounder410

A:sleep mode in windows 7 wont wake up

Sleep/hibernate/standby problems are usually caused by corrupt video drivers
I would start by replacing that

Read other 4 answers
RELEVANCY SCORE 58.8

My PC hangs at startup. Nothing works, no mouse, no keyboard, everything just freezes! I turn on the PC in the morning and turn it off at night when i go to bed. It only freezes when I first turn it on in the morning. The only way to 'unfreeze' it is to do a hard reboot by pressing on the power button for awhile. The weird thing is, if i use to PC for a few hours then decide to reboot it, it works perfectly fine. Seems like it hangs after the PC has been off/idle for too long. This issue has been happening since October 2010. First it would hang maybe once a week (i ignored it thinking that its just a minor thing). Now i have the problem everyday!
Another problem I started having since a few days ago is that I can't wake my PC up from sleep after it has been sleeping for about 2hrs. I move the mouse and the fans will start running but there is no light at the power button to indicate that it is on and working. My screen is blank. I have to off the power switch and turn it back on. Then it will load everything for me like how i left it. Weird really.

The is no errors in my event logs. The only errors are from when I do the restart. There are no errors under system, nor under applications. (That's because I fixed all errors)
Hardware diagnostics did not find any hardware problem. That tool even did a memory test for me and found no errors.
Avast did not find any viruses.
I do a disk defrag and cleanup every week.
Windows is always updated.
I use ... Read more

A:Windows 7 hangs after startup and can't wake up after sleep

Come on guys, 67 views and still noone can help?

Read other 1 answers
RELEVANCY SCORE 58.8

Dears ,

please i need a help on this issue , my windows keep crashing on wake from sleep or getting back from hibernate

please find the files needed attached .

Thanks a lot .

A:Windows 8 Crashed on wake from sleep or hibernate

Please upgrade or remove hotspot shield. hssdrv is the culprit, seemingly.

Read other 6 answers
RELEVANCY SCORE 58.8

Upgraded to Windows 10 in late July- (I should have known better than to upgrade since I had a year to do it). --now laptop won't wake from sleep withoout a hard button shutdown and reboot. Have followed the instructions on HP website about enabling keyboard, allowing to wake from sleep, updating bios and allowing automatic updates for windows and HP. Please help, this is crazy rebooting my laptop everytime I walk away from it for awhile. Product number:G6T85UA#ABABIOS:F.26-01/19/2015Keyboard revision:89.23Total memory:8.00 GBProcessor name:Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz













Solved!

View Solution.

A:Notebook won't wake from Sleep after Windows 10 upgrade

Check out this post and see if it applies/helps: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/How-to-Resolve-Post-Windows-10-Upgrade-Issues-on-HP-Laptops/m-p/5209825/highlight/true#M309942

Read other 10 answers
RELEVANCY SCORE 58.8

Windows 7 Ultimate x64
Full Retail Version
Philips HEPC 0602/05
clean build (Restored in Jan from clean ghost image)

Problem has always occured on this pc so i stopped using sleep - recently I restorred a ghost (clean) image and have been keeping it upto date and clean (ish) with mainly drivers for WP7/Printer etc. installed and not much else.

It seems to be fine for a week/2 but then it will start producing BSOD on wake from sleep - following todays Windows update updates.

Files attached as per process/guidance notes.

Any help appreciated...

And thanks to Fimble for pointing me in the right direction!

A:Windows 7 Ultimate BSOD following wake from sleep

Hi Mjmoney.

STOP 0x0000007A: KERNEL_DATA_INPAGE_ERROR
Usual causes: Memory, Paging file corruption, File system, Hard drive, Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service Pack.

Your latest dump file blames ntkrnlmp.exe which is a Windows System file and is highly unlikely to be the cause.
Old and incompatible drivers can and do cause issues with Windows 7, often giving false error codes.

As a Priority:

Norton is known to be a cause of BSOD's on Windows 7 systems. I suggest that you uninstall Norton using the Norton Removal Tool ftp://ftp.symantec.com/public/englis...moval_Tool.exe in Safe Mode. Download Blue Screen friendly Microsoft Security Essentials as its replacement. Make sure Windows firewall is enabled!

Outdated Drivers. Update:

000.fcl Fri Sep 26 14:11:22 2008 CyberLink FCL Driver. Update or uninstall.

AVerBDA3x_x64.sys Tue Jul 01 01:56:25 2008 AVerMedia V1A8 EZMaker. Update or uninstall.

e1e6032e.sys Tue Mar 24 18:17:23 2009 Intel 82562V-2 10/100 Network Connection Ethernet driver

RTKVHD64.sys Tue May 20 11:00:27 2008 Realtek HD Audio R2.57

Drivers with Updates:

xusb21.sys Thu Aug 13 23:10:17 2009 Check for updates. XBox USB wireless controller

Bugcheck Analysis
Code:
Loading Dump File [D:\DUMPS\mjmoney\021011-33415-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search pa... Read more

Read other 2 answers
RELEVANCY SCORE 58.8

Not sure where to post this ... hence new thread.
Has anyone found a magic keystroke combination for "Sleep" or is there anyway to create one? I know about Win+I then Power then Sleep.

Has anyone found an option to stop scheduled tasks or other triggers that "Wake" your computer from sleep? I find my computer running in the morning after putting it to sleep at the end of the previous evening! I have reviewed all 41 scheduled tasks created by Windows and installed applications and "apps" and found none that have the Wake Computer check box checked. What's annoying is the fact that once woken the computer does not go back to sleep again! I am using the supplied balanced Power plan. Any advice?

KJ

A:Windows 8 Sleep, Wake, Restart and Shutdown

I use this approach to the various "power" options. Check your wake on lan settings in Device Manager > for your various network adapters. Also, check wan on lan setting in BIOS or, I suppose, UEFI.

Read other 1 answers
RELEVANCY SCORE 58.8

If go into sleep mode, either my closing lid, holding power button, or using the  Windows 10  Start/Power/Sleep option, then after going into sleep mode, never will come out of it.  Doesn't matter if I try to come out of it 5 seconds later or an hour later, just blank screen with power button stuck on green.  No activity, just frozen. I have updated to latest bios  v1.20 and also updated the display driver.   Please help, just got this computer and crazy can't even use it because can easily go into sleep mode if walk away, etc. 

A:Thinkpad L450 won't wake up after sleep - Windows ...

There have been a been a number of systems that don't resume from sleep under Windows 10 properly as expected, so I don't think this is likely to be a problem specific to the L450.  Sounds like updating the BIOS was a good step. Have you tried to update the Windows 10 power management driver?  That might be a good next step if you haven't already tried it.http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-L-Series-laptops/ThinkPad-L45... Worth a shot..

Read other 4 answers
RELEVANCY SCORE 58.8

Hi, That's the question. I have my computer in my bedroom, so this is a real pain! The automatic maintenance is scheduled to 10am (I rescheduled it on purchase, when it annoyed the hell out of me at 3am). That one also still works and I'm fine with that. But it's just acquired without my permission a new wake up at 7am that I don't want - particularly when I wish to sleep in!! I recently installed iTunes, which coincided with the problem, but couldn't find anything on the program that suggested any type of maintenance time, nor does the powercfg (info I found when Googling to solve this problem) mention iTunes. I've tried Dr Google, which usually helps me solve problems such as this, but with no luck. See picture of power cfg. Can anyone help?

A:My Windows 8 PC Wakes Up From Sleep With Wake Up Disabled

Looks like when you disable wake up it takes a day or so to work. My computer still woke up as per normal the following day (I'd disabled it at night), but actually worked AFTER that initial next day. Silly...

Read other 1 answers
RELEVANCY SCORE 58.8

When waking my computer from sleep it takes 8 seconds for the screen to come on, then nothing responds for another 25 seconds. I fixed all the errors in event manager, updated the bios, installed all the newest drivers, changed BIOS settings. All to no avail.

All the components (except the MB and CPU) were recycled from my last motherboard which would be ready to go immediately from sleep. My previous build (which ran great) was also Windows 8.1 but the motherboard died. I have no password. The lock screen is disabled. Disabled suspend, and shut off hybrid sleep.

Why the lag? Is there any way to find out what's slowing me down?

MB p8Z77-V Pro
Memory (not on the approved list):
CMX8GX3M2A1600C9 4GIG 2 sticks
CMX8GX3M4A1600C9 2GIG 2 sticks
i7-3770 CPU
BIOS 2104
OS Win 8.1 Pro on a Kingston SSD, data on a Seagate Barracuda ST3000DM001
NVIDIA GeForce GTX 650 Ti BOOST

A:Windows 8.1 New Build Slow Wake from Sleep

Solved - I examined the sata settings in the BIOS and found the SSD drives were not detecting. Or perhaps semi-detecting since the system could boot off of them. I moved them onto different ports and they started to detect. This also restored my proper wake from sleep speed.

Read other 1 answers
RELEVANCY SCORE 58.8

Last week I put my pc to sleep and it did not wake up. I turned it on and off and black screen of death type. I unpluged the power and it came back up just about 10 mins ago I put my computer to Hibernating(big mistake) I ment to sleep it. I am not stuck with a pc that does not work... I think I am running 32bit. My pc will not answer me the mouse and keyboard = dead. I can not get anything to work. I have unplugged it, turn power off, restart it and held power button. The pc I think is broken now.... I hate vistia. Does anyone have a problem like this and fixxed it?

Please and thank you for you're help.

A:windows 7 is broken help please.. Hibernating/Sleep will not wake up

Hi try removing all power including the battery if a laptop and reseat the ram,also retry holding the power button for 1min,then try rebooting

Read other 6 answers
RELEVANCY SCORE 58.8

Howdy all, I seem to have the worst luck with my PCs either not sleep or they wont wake up! lol my current issue is not waking up, every night I put my pc to sleep and the next morning when I click the mouse or push a key either nothing happens or the tower lights up and fans kick on but the screen stays black. and I must power down and restart

I have all new video drivers, I have a feeling it may be my keyboard because sometimes the keyboard doesn't shut down when the pc is put to sleep. It still has all its lights on. It is a Merc steel series gaming keyboard,

The only other weird errors I get in my event viewer are these, and they have to do with windows search.

Eventid 1006 The Windows Search Service has failed to create the new search index. Internal error <4, 0x80070002, Failed to add project: C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Projects>.

The Windows Search service terminated with the following error:
The system cannot find the file specified.

Eventid 7023
event id 7034

The Windows Search service terminated unexpectedly. It has done this 37 time(s).

Any help would be great!

A:Windows 8.1 wont wake up from sleep mode

Hello jdude,

I has this issue once as well. I added AHCI Link Power Management - HIPM/DIPM to my Power Options. Setting it to HIPM+DIPM stopped this for me. You might give it a try to see if it may for you as well.

AHCI Link Power Management - Enable HIPM and DIPM - Windows 7 Help Forums

Hope this helps,
Shawn

Read other 3 answers
RELEVANCY SCORE 58.8

Hello,

So my problem is that I have upgraded to Windows 10, on a system previously running Windows 7. My system, since Windows 10 has been out, has been unable to wake successfully from sleep.

What happens is that I can "wake" it with the mouse and keyboard, it beeps, revs, all that jazz, but then it hits its idle state and the monitor never detects a signal during this time period. The only way to resume function is to hold the power button and restart.

I contacted Microsoft, and they tried to suggest I pay for support when their OS is responsible for breaking this functionality, not user configuration. I know this, because it didn't work on the vanilla install of Win10 either, despite working flawelessly on 7.

Now, for the details:
OS: Windows 10 64x Pro
Mobo: Asus P8Z77-M
RAM: Corsair Vengeance 8GB 2x 8-8-8-24 1600mhz
Intel i5-3570K
Evga-Build NVIDIA 660ti 2GB DDR5
PSU: Corsair 650W... can't remember precise make.

What I have tried:
- Clean install
- Restore Point
- Manually setting graphics PCIE in BIOS
- Win10 Compatible BIOS updates (done with two separate BIOS's post-win10)
- Chipset Updates (only one Win10 one released)
- Windows Updates (Current version)
- All driver Updates
- Edit Power plans for sleep and Dev Manager enabled virtually all devices with the option to wake the computer
- Cables switched out, all are functional
- SFC /scannow

Yea.... so that's where I stand. As you might expect, I'm running out of ideas. Thank you very much for any assi... Read more

Read other answers
RELEVANCY SCORE 58.8

I got my 6005 with Windows 10 on it. Upgraded video card to Radeon hd 6450. Everything? works, except for sleep. After it wakes the screen is black. I can hear the computer boot, I can see and move the pointer, but the screen is black with now way to sign in
 
Also if I put that same exact video card into my older gateway (running Windows 10) it wakes up fine

A:will not wake up properly from sleep after Windows 10 upgrad...

Hi: I assume the model PC you have is a HP 6005 Pro business desktop PC? If so, a couple of things you can try... 1. Install the amd chipset drivers for your PC.  1st driver on the list.  Restart the PC after installing. http://support.amd.com/en-us/download/desktop/legacy?product=legacy4&os=Windows%2010%20-%2064 2. Disable fast startup.  See this link for how to do that. http://windowsable.com/how-to-enable-or-disable-fast-startup-in-windows-10/  

Read other 1 answers