Over 1 million tech questions and answers.

PowerShell issue ('Cannot convert value "and" to type "System.Int32")

Q: PowerShell issue ('Cannot convert value "and" to type "System.Int32")

Hello All,

I started a few weeks ago on the PowerShell programing and I got my answer from here only. So am putting up the error that I am getting now to get some help again.

Scenario : I wrote a script that checks a Folder on a server and counts the number of files in it.Then when it finds the resulting number to be more then a specific value(threshold) it sends up a mail to the required alias. To break it all along the portion to send a mail is generated through DBmail using another .PS1 file.

In the PS1 file containing the main checking of number of files I am trying to pass 2 parameters :

1. Folder path on the server
2. the Threshold value of number of files

Now when I created a job to run this powershell script as :

& "C:\PowerShell\Power.PS1" \\XXXX\\c$\Documents and Settings\ABC\Local Settings\Temp 10


IT fails with the error :

A job step received an error at line 1 in a PowerShell script. The corresponding line is '& "C:\PowerShell\Power.ps1" \\XXXX\\c$\Documents and Settings\ABC\Local Settings\Temp 10'. Correct the script and reschedule the job. The error information returned by PowerShell is: 'Cannot convert value "and" to type "System.Int32". Error: "Input string was not in a correct format." '. Process Exit Code -1. The step failed.


I really can not move forward on this.

Please help.

RELEVANCY SCORE 200
Preferred Solution: PowerShell issue ('Cannot convert value "and" to type "System.Int32")

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: PowerShell issue ('Cannot convert value "and" to type "System.Int32")

Just to add for reference Below is the code for the Power.Ps1 file that I have used :


param
(

[string] $directory_string,
[int] $benchmark

)

$date=get-date
[int]$directory_file_count = 0

# check that the directory exists.
$does_directory_exist = (Test-Path $directory_string)


# if it does, then continue
if ($does_directory_exist)
{


# Check for the number of files on the directory
$directory_file_count = (get-childitem $directory_string -name -recurse).count

# If number of files exceeds the limit, send mail to notify

if($directory_file_count -gt $benchmark)
{
& "C:\Powershell\DB_mail.ps1"
$subject= "XXXX"
$body= "XXXX"

}

else

{
& "C:\Powershell\DB_mail.ps1"
$subject= "XXXX"
$body= "XXXX "
}

}
else
{
& "C:\Powershell\DB_mail.ps1"
$subject = "XXXX"
$body = " XXXX"
}

Read other 5 answers
RELEVANCY SCORE 165.2

Hey everyone,
        I am trying to get the REST queries to work with the sharepoint end points instead of graph end points. I first created an app with relevant permissions and have given it the admin consent. Then I am hitting the https://login.microsoftonline.com/<tenant>.onmicrosoft.com/oauth2/token?Content-Type=application/x-www-form-urlencoded end
point with https://<tenant>.sharepoint.com as resource. I am then using the access token retrieved to give the rest call to https://<tenant>.sharepoint.com/_api/v2.0/drives/b!3indYSbqZ0-hVSPnCgIZy-2xDMh7jH9AuQnEzJMc6TEfQoSJvJT-R6tT0lFBQiPr/root/delta
but it is failing with "error":{"code":"generalException","message":"General exception while processing"}}. The REST response code is 401 Unauthorized. I have filed a Microsoft support ticket but they
have asked me to post on these forms. Can someone please help me with this? I am not able to move forward because the error is pretty generic and doesn't give any additional details.
Thanks,
Sai Kiran Katuri.

Read other answers
RELEVANCY SCORE 153.2

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Read other 16 answers
RELEVANCY SCORE 151.6

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

Read other 8 answers
RELEVANCY SCORE 150

Hi all
Previously the  "Save Picture"  box would put a web generated title in the box and automatically selected JPEG.  Now the title box reads "untitled" and the only file options offered are "png" & "bmp" 

Please note that a similar post has appeared, but the solution did not match the fault.  I'm seeking to restore the automatic response to save picture, that might have been upset by antivirus clean-up programme.

Thank youin advance for considering my problem

Read other answers
RELEVANCY SCORE 149.2

One feature I really liked in XP was the ability to look in a folder through My Computer and sort the files by extension. For example if I wanted to get all .jpg files to one side of the folder as I looked for a file, I could click View, Arrange Icons By, Type and make that happen. I don't see that feature in Windows 7. I'm using W7Pro and can't find that or a similar feature anywhere. Is it here and I just haven't found it? TIA

A:Where is "VIEW", "ARRANGE ICONS BY", "TYPE"

open a window ,click organise/layout /menubar.
then when you click view in the menu bar group by is in the list

Read other 3 answers
RELEVANCY SCORE 147.6

I have a 7200rpm hard drive that shows up as 3 separate partitions on my MacBook Pro desktop. They are "System Reserved", "Untitled 1" and "Untitled". When looking at them in the Disk Utility program, they show up as "System
Reserved",  "disk2s1" and "disk2s3". I can't seem to find a way to wipe the drive and just have 1 partition. I don't need to save anything on it so it can all be deleted and consolidated. Not sure if this helps but the previous
owner told me that he had accidentally erased another partition that prevented the hard drive from being reconsolidated. It also may have been a Windows boot drive. Any help in restoring this hard drive would be appreciated. Thank you.

Read other answers
RELEVANCY SCORE 144.8

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

Read other 1 answers
RELEVANCY SCORE 144.4

OK guys, im kinda new to this forum, so... hello.
My computer has a not so serious problem-When I try to open Local Disk C by double clicking it says:
"
Windows cannot find install.exe.
This program is needed for opening filed of type 'File'.

Type in the executable file to be used instead:
_______________________________________
"

This problem isnt very serious, I just dont want my computer to remain "corrupt" if you know what I mean.

Help my and I will be grateful!

A:Cant open C:/:"Install.exe is needed for opening type of "file""

Hello and Welcome to TSF

Have you scanned your system for viruses lately? What antivirus program is installed on your system?

Read other 4 answers
RELEVANCY SCORE 144.4

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Read other 6 answers
RELEVANCY SCORE 144.4

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

Read other answers
RELEVANCY SCORE 143.6

I am trying to use the fsutil file setshortname to set "Program Files" to PROGRA~1,

but the system is giving me an "Error: Access is denied" response.
what I have typed:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd /d D:\
D:\>fsutil.exe 8dot3name set 0
The registry state is now: 0 (Enable 8dot3 name creation on all volumes).
D:\>fsutil file setshortname "Program Files" PROGRA~1
Error:  Access is denied.
And I try it in Safe Mode.It is also "Access is denied.".
Can someone
help me?

A:"fsutil file setshortname "Program Files" PROGRA~1"=>"Error:Access is denied."

Hi TimFF,
This might be related with the UAC settings, check this thread:
give full permission for the users in program
files folder
The steps in the above thread is not recommended.
For the short name usage, we may consider to create a directory-junction from
PROGRA~1 to C:\Program Files:
With the following commands:
mklink /J "C:\PROGRA~1" "C:\Program Files"
Reference:
Mklink
Best regards


Michael Shao
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 143.6

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

Read other 14 answers
RELEVANCY SCORE 142.8

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

Read other 6 answers
RELEVANCY SCORE 142.8

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

Read other answers
RELEVANCY SCORE 142.8

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

Read other 12 answers
RELEVANCY SCORE 142

my boss only know how to use google chrome, and he usually save websites in his own document library, and he always use "right click mouse > save as" to open his own document library directory, and sometimes he will save some pdf, but when he tries to open an pdf file through google chrome with right click > save as, he can only see file with html extension. any one can help to add "all files" in the drop-down menu next to "Save as type" in google chrome, so he can see all files types when he right click > save as through the google chrome browser.


Thks in advance

Read other answers
RELEVANCY SCORE 141.2

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

Read other 2 answers
RELEVANCY SCORE 140.8

I'm looking for a program capable of interpreting one key and changing it to another, like a middle man. So, in a simple example, output the letter "b" when I push "a". Or in a more complex example, convert things like movements of a joystick into movements of a mouse, or triggers on the joystick which seem to be registered by games as things like "Logitech Joystick button #1", into keystrokes like "w". Hopefully that's understandable?

Thanks for any suggestions,
Tom

A:Program to "interpret" key strokes, and "convert" them to another?

There is something extremely advanced that can accomplish all you need and more:

AutoHotkey

It has all the necessary documentation to get you started as well. I use it for a lot of old games.

P.S. That sounded like something off a Sci-Fi film.

Read other 6 answers
RELEVANCY SCORE 140.8

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

Read other 9 answers
RELEVANCY SCORE 139.6

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\i... Read more

Read other answers
RELEVANCY SCORE 139.6

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

Read other 1 answers
RELEVANCY SCORE 139.6

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\sy... Read more

A:"Your System Is Infected" Background + "Internet Security 2010" virus/malware problem

Hi and welcome to TSF.

I'm afraid HijackThis no longer provides the information we require.

We want all our members to perform the steps outlined in the link given below, as far as they possibly can, before posting for assistance.

http://www.techsupportforum.com/f50/...lp-305963.html

If you have problems with any of the steps, simply move on to the next one and make a note of the problem in your reply.

Please note that the Security Forum is always busy, so I would ask for your patience while waiting for a reply - it may take a few days.

This thread will now be closed.

Read other 1 answers
RELEVANCY SCORE 139.2

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

Read other answers
RELEVANCY SCORE 139.2

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

Read other answers
RELEVANCY SCORE 139.2

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

Read other 9 answers
RELEVANCY SCORE 139.2

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

Read other 5 answers
RELEVANCY SCORE 139.2

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

Read other 5 answers
RELEVANCY SCORE 139.2

Good Morning,

I would like to introduce myself. I am new to the forum. Should I address an issue inappropriately, kindly alert me.

Most recently, I have experienced multiple PC issues. Recently, I performed a System Recovery and encountered the following ?

1. Cannot perform a SYSTEM RESTORE. The message is: ?Restoration Incomplete. Your computer cannot be restored."

2. When I booted up this morning, and DID NOT HAVE A DESKTOP.
The screen was blank ? no Icons.

3. The items below are APPEARING IN MY TEMP FOLDER, and are located at: C:\DOCUME~1\COMPAQ~1\LOCALS~1\Temp:

........a. 415303181927525125.tmp
......... plus similar numbers.

........b. IswTmp
........c. msohtmlclip1
........d. msohtmlclip

I delete the above items through safe mode but they re-appear.
** I am MOST CONCERNED ABOUT Items 1 & 2.

SYSTEM SPECIFICATION:

? (DESKTOP PC) Windows XP
? (SP3) HP Compaq Presario 061 - Media Center Edition,
? AMD Athlon (m) 64 Processor / (X 86-Based PC - 32-bit package)
? MOTHERBOARD Chipset - ATI RADEON XPRESS 200 CHIPSET
? Version 5.1 / 2600 Build Processor

** If someone would give me some feedback, I would appreciate it tremendously.
** THANKS IN ADVANCE.

Kind regards,
AJ

A:NO DESKTOP after booting up & SYSTEM RESTORE "Incomplete" & "Strange" Temp Files

Usually when the machine has a "blank" desktop, the boot/startup process has been interupted or is frozen to before Explorer is launched.

You can launch Explorer manually be navigating C:\Windows and double-clicking "Explorer".

If successful, do the following:

Start>Run>(type) "msconfig" and turn off all non-MS services and all startups.

Then, Start>Run>(type) "cmd", and at the command prompt type "chkdsk /f" and schedule a chkdsk to run on next reboot.

Reboot system and report results.

Read other 3 answers
RELEVANCY SCORE 139.2

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

Read other 6 answers
RELEVANCY SCORE 138.4

I have had a strange problem.
Occasionally after switching to the lock screen(Win + L), I am not able to type the letter "O" or "L".
If my password contains either one of these letters, I am not able to log in unless I use the onscreen keyboard.

Anyone has encountered similar problem or found a solution?

Thanks in advance.

Read other answers
RELEVANCY SCORE 138.4

Hi, I've looked all over the internet in attempt to find a solution to a problem that's just affected my computer, and I haven't been able to find anything that relates specifically to the problem I'm encountering.

This hit my computer without warning, I switched it on this morning and it worked as normal, all of a sudden things started to freeze up. I restarted the computer, and now a lot of programs are refusing to open - Microsoft Office, among others, states "Error: There Are No More Files", whilst other programs such as Google Chrome and Internet Explorer state "Attempt to Access From Invalid Address", even when I am running them from their root folders.

I am running a Dell Latitude 830 with Intel Core 2 Duo T7250 (2.00GHz, 2M L2 Cache, 800MHz) Dual Core, 1.0GB, DDR2-667 SDRAM, 2 DIMMS, Intel Integrated Graphics Media Accelerator X3100 and am obviously using Windows XP. I have scanned my system with Avast Antivirus, which didn't state that there were any viruses, so I am stuck as to what exactly the problem is.

I'd really appreciate some help in figuring out what has happened, thankyou so much for your time in reading this!

A:"There Are No More Files"/"Attempt To Access From Invalid Address" Issue

I am having the same problem on the same exact hardware. i don't think it could be a hardware issue, but i could be wrong. i have tried repairing windows with no success. i'm thinking the only option is to reinstall windows completely.

Read other 13 answers
RELEVANCY SCORE 138.4

I have an issue with the "Velocity Scale" under "Brush Tracking" in Painter X while using my Wacom Intuos 3. My Wacom Properties are set to the the default. All of the other scales in "Brush Tracking" are pretty dynamic all across the board but the "Velocity Scale" only moves between 0 and 3. I managed to get it up to 4 one time but I don't know how. It looks like it should be able to reach 100 and the farthest its gone up to is 4.

What does this mean? What is the "Velocity Scale"? Is it supposed to be acting this way or is my pen or tablet broken? If so, is there anything I can do to fix it?
 

Read other answers
RELEVANCY SCORE 138.4

Hi, I've hit a problem with Windows XP, I've looked around and I haven't been able to find anywhere which offers a potential solution, so I really hope somebody here can help!

This hit my computer without warning, I switched it on this morning and it worked as normal, I was using Google Chrome, in order to browse websites that were free of spyware (the Guardian at time of crash) all of a sudden things started to freeze up. I restarted the computer, and now a lot of programs are refusing to open - Microsoft Office, among others, states "Error: There Are No More Files", whilst other programs such as Google Chrome and Internet Explorer state "Attempt to Access From Invalid Address", even when I am running them from their root folders.

As I've stated I am running a Dell Latitude 830 with Intel Core 2 Duo T7250 (2.00GHz, 2M L2 Cache, 800MHz) Dual Core, 1.0GB, DDR2-667 SDRAM, 2 DIMMS, Intel Integrated Graphics Media Accelerator X3100 and am obviously using Windows XP. I have scanned my system with Avast Antivirus, which didn't state that there were any viruses, so I am stuck as to what exactly the problem is.

Thanks for reading! I really hope that somebody can help..
 

A:"There Are No More Files"/"Attempt To Access From Invalid Address" Issue

Read other 8 answers
RELEVANCY SCORE 138.4

The files in one of my folders aren't showing up. It's only that specific folder that is having problem. Whenever I try to access it, no files show up even though there are clearly files in it (Properties say 20.5 GB). And it will always stuck at "not responding"

This is what it looks like:

http://i.imgur.com/p2bCy4s.jpg?1

I've found a possible solution but since it deals with command prompt, I want to make sure I don't make things worse. I need to know what exactly the following command does:

attrib -h -r -s /s /d g:\*.*, in which g is the drive letter.

This video: says it reveals hidden folders but I'm not sure if it's relates to my problem exactly since Properties doesn't have "Hidden" checked. It only has "Read-Only" checked under the General tab.
 

Read other answers
RELEVANCY SCORE 138.4

Using "System Performance" DCS reports some events are lost. To fix it, I need to increase buffer size but I can't do it because all parameters are disabled. 
When I create custom DCS with same trace (based on "Windows Kernel Trace" provider) I increase num of buffers and everything works fine.
How can I change it for "System Performance"?

Read other answers
RELEVANCY SCORE 138.4

I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet. On the other hand, last night I did nothing but surf YouTube for 3 hours and didn't get a BSOD at all. However, since then I haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until I turned it off. My OS is Windows 7 Home Premium 64bit. It came preinstalled from the manufacturer and unfortunately I do not have the install disc. The entire laptop is less than 2 years old and there have been no major hardware changes and I have never reinstalled the OS.

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

Read other 1 answers
RELEVANCY SCORE 138.4

Dear Experts,

I have created windows image on Drive F: but delete it after some time manually due to some space prob.
But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35 Gb of System Image in drive F: when i brows the Manage Disc Space option but i cant find it on the same drive. (Plz see attached pic)
Plz help me to locate this and delete the same.

Thanks

A:Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Hello sattyaji, and welcome to Seven Forums.

It may still be showing if the system image was created as part of a Windows backup. Using the tutorial below to reset Windows Backup should clear it for you, but you will need to set up your backup again afterwards.

Backup User and System Files - Reset to Default Configuration

Hope this helps,
Shawn

Read other 5 answers
RELEVANCY SCORE 138.4

I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet. On the other hand, last night I did nothing but surf YouTube for 3 hours and didn't get a BSOD at all. However, since then I haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until I turned it off. My OS is Windows 7 Home Premium 64bit. It came preinstalled from the manufacturer and unfortunately I do not have the install disc. The entire laptop is less than 2 years old and there have been no major hardware changes and I have never reinstalled the OS.

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

Read other 4 answers
RELEVANCY SCORE 138.4

Which one should I do? I originally wanted to just do "Return computer to factory condition" but Theog just suggested "Use A System Image Created Earlier." I have no idea what to do. So confusing!

A:"Return computer to factory condition" or "Use A System Image Crea..."

Hello M4TE and welcome to Seven Forums. Sorry for the delay in responding but I just came across your question.

Most newer manufactured computers have a hidden recovery partition on the hard drive. The manufacturer provides specific instructions on how to access that partition in case you want to restore your machine to the exact condition it was in when it left the factory. That means you'd have to go through the time consuming process of cleaning out factory bloatware (like free trials of programs you'll never need), installing programs you do need, updating everything, creating your personal settings, etc. Here is a general idea of how to access the hidden recovery partition.

HP Recovery From Partition

Let's say it took you a day or two to set up your machine to your liking using the hidden recovery partition. A System Image is like a snapshot of your entire hard drive. It will include everything from the operating system to all your programs, files, photos, music, all updates ... everything. Most folks keep it on a separate external hard drive. Let's say a week later you get a virus or your machine crashes for some reason. You can use that System Image to return your machine to the exact condition it was in when you made the image. Usually takes about 30 minutes or so and you're back in business. It's a lot faster and more convenient to only worry about a week of updates compared to probably months with the hidden recovery partition. The newer a System Image is the... Read more

Read other 1 answers
RELEVANCY SCORE 138.4

hi every body
My PC has lots of files called "Thumbs.db" & "System volume information" in all its drives.I cant delete these files and I think the cause of shutting my pc down automatically and showing blue screen is these files.the operating system is win xp/sp2.
I don't know what to do with these and what anti virus will delete them.please help me.
thanks
 

Read other answers
RELEVANCY SCORE 138.4

First off, thank you for any assistance in advance.

Problem: "System Alert" balloon in tray icon that will not go away and redirects me in IE 7 to hxxp://www.virprotect.com/?aff=1012.

Using SpyBot Search & Destroy and Ad-Aware SE, I seem to have gotten rid of the problem of the redirection of my home page as well as removed the trojan that caused all of this in the first place (I think). The pesky balloon, however, remains. All pre-steps your forum recommeded have been completed. Below are the logs your forum requests in advance (please note that my DSS "extra" log file is attached):

PANDA ACTIVESCAN
===============

Incident Status Location

Potentially unwanted tool:application/myglobalsearch Not disinfected c:\program files\MyGlobalSearch
Spyware:Cookie/Atlas DMT Not disinfected... Read more

A:[SOLVED] Trying To Remove "System Alert" Balloon That Directs To "virprotect.com"

Download SDFix from here and save it to your desktop.


Please then reboot your computer in Safe Mode by doing the following :
Restart your computer

After hearing your computer beep once during startup, but before the Windows icon appears, tap the F8 key continually;
Instead of Windows loading as normal, a menu with options should appear;
Select the first option, to run Windows in Safe Mode, then press "Enter".
Choose your usual account.

In Safe Mode, right click the SDFix.zip folder and choose Extract All,
Open the extracted folder and double click RunThis.bat to start the script.
Type Y to begin the script.

It will remove the Trojan Services then make some repairs to the registry and prompt you to press any key to Reboot.
Press any Key and it will restart the PC.

Your system will take longer that normal to restart as the fixtool will be running and removing files.
When the desktop loads the Fixtool will complete the removal and display Finished, then press any key to end the script and load your desktop icons.

Once the desktop icons load the SDFix report will open on screen and also save into the SDFix folder as Report.txt
(Report.txt will also be copied to Clipboard ready for posting back on the forum).

Finally paste the contents of the Report.txt back on the forum.


=========================================

This will help to identify malware on your system.
Please download Combofix from any of these locations:
... Read more

Read other 9 answers
RELEVANCY SCORE 137.6

Hello,
First let me tell you about my system.   This is an Inspiron
E1705/9400 laptop with the T7400 Core 2 Duo processor running at 2.16
GHZ.   It has 2 GB of RAM and a brand new 500GB Hitachi Travelstar hard
drive (7200 RPM).   It also has the GeForce Go 7900 GS video card.   
It previously had Windows XP Professional (32 bit) and worked fine.  
But, I have three computers in my home and home office and would like
them all to work better together on my wired home network, so I am
upgrading all three to Windows 7.   My two desktops (one is Dimension
XPS 420 and the other is Dimension XPS 430) seem like they will be no
problem to upgrade to Windows 7.   But, this laptop was not listed on
Dell's Windows 7 Compatibility List.   However, the Windows 7 Upgrade
Advisor that I downloaded and ran seemed to say that it was OK to do a
clean install of 32 bit Windows 7 and it only had a few minor concerns,
where it said to check for updated drivers from the manufacturer.   The
laptop originally came with a 100GB hard drive.   For my use, that is
getting very small, so I decided to get the same exact 7200 RPM drive
in the 500 GB size.   This will allow me to do a clean install of the
32 bit Windows 7 OS on the new hard drive and not have to wipe the old
drive to do it.   I can just hold onto the old HD and stick it back in
whenever I might ... Read more

A:Minor Problem with New Windows 7 Installation on my Inspiron E1705/9400 - two entries for "Base System Device" under "Other Devices" with yellow exclamation point

BTW, I just downloaded and installed the driver pack from that ftp location and it worked, even for Windows 8.1 - 64 bit.
Thanks Steve!

Roger

Read other 9 answers
RELEVANCY SCORE 136.8

With EaseUS Backup Tool, I've cloned these two partitions ("System Reserved" and "C") to same-sized partitions on a external HDD ("X" and "Y"). Picture tells it concisely:
How to make drives "X" and "Y" boot-able?

In "Disk Management", I've noticed these partition labels missing:"X" (or "System Reserved") is missing System label,
"Y" (or "OS") is missing Boot, Page File and Crash Dump labels

Thank you!

A:Both "System reserved" and "C" partition cloned to external HDD: boot?

You cannot boot Win7 on external HD, unless it is connected via eSATA.

Read other 9 answers
RELEVANCY SCORE 136.8

Hi

New installation of windows 7 ultimate 32bit and on trying to copy a 38gb folder from c drive to d drive, pc gives bsod.
Lately playing world of tanks is resulting in system lock ups,please can anyone help

Frosty

A:bsod copying files from "c" to "d" drive and system lock ups

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 2 answers
RELEVANCY SCORE 136.8

I've run SuperAntiSpyware, Ad-Aware, SpyBot and Norton which removed some trojan files and registry items but I'm still getting pop-ups ("Security System Warning" and "System Integrity Scan Wizard"). Below is my HiJackThis log. Thanks in advance!
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:00:21 PM, on 4/2/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\system32\cisvc.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Microsoft SQL Server\MSSQL$VAIO_VEDB\Binn\sqlservr.exe
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\WINDOWS\system32\cryptainersrv.exe
C:\WIND... Read more

A:"Sys Integrity Scan Wizard" & "Security System Warning" Pop-ups

Hi Welcome to TSG!!
Please visit this webpage for instructions for downloading and running ComboFix.

Post the log from ComboFix when you've accomplished that, along with a new HijackThis log.
 

Read other 1 answers