Over 1 million tech questions and answers.

Solved: HP Deskjet 1000 J110 VERY Slow

Q: Solved: HP Deskjet 1000 J110 VERY Slow

I have this HP printer with my windows xp system. I was printing a couple pages yesterday and it was ok, then I discovered I made a mistake and needed to print it again, and I didn't do anything different.... but it suddenly turned extremely s-l-o-w. When I clicked print it just sat there. The print dialog box said "printing". It sat so long that I canceled it, eventually when I printed again I discovered that if I wait long enough, it took the paper in, then printed like 1 line and stopped, few minutes later 1 more line, etc I canceled it.

When I try to print a test page, it does the same thing. I went into the toolbox and tried the "clean" function, but that would not work - it said "device busy". I tried to align the printer, but that also said "device is busy". It won't let me do anything!!

I also tried to re-install the drivers, but it says the driver is not on the disk (i have the original disk!) and a generic driver didn't work.

I can't do anything with it. This just suddenly happened. How can I fix this?

RELEVANCY SCORE 200
Preferred Solution: Solved: HP Deskjet 1000 J110 VERY Slow

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Solved: HP Deskjet 1000 J110 VERY Slow

Read other 6 answers
RELEVANCY SCORE 110.8

Is there any way or any work around to get the HP Deskjet 1000 j110 printer to work in Windows XP 64? HP says the j110 is not supported for xp 64 but I was wondering if anyone had messed with this and figured a way with some other drivers or some way to make it work in the os xp-64?
Thanks
 

A:get the HP Deskjet 1000 j110 printer to work in Windows XP 64

If HP doesn't have the drivers, then you aren't likely to find a "work around". I've seen drivers hacked to correct problems or enable features, but I've not seen drivers created for non supported hardware.
 

Read other 3 answers
RELEVANCY SCORE 63.6

I'm trying to check the ink levels for my printer. For HP Deskjet 1000 J100 series. I've installed and set up the printer but don't know where the control panel or HP toolbox is. I opened the HP Deskjet icon, but the only thing that opens is a window asking if I want to install a new printer. I opened the HP Smart app, and the printer says that it's Ready, but when I click on printer settings, then print quality tools, it says "This feature is not available for your selected printer through HP smart app. To check control panel."

I've been going around in circles trying to find the control panel or toolbox. Also, I've been using the printer for a couple of years now, with no problems. So it's hooked up correctly. It's only now I decided to use the Check Printer ink function.

Maybe I need to install another driver or something. All I want to do is check printer ink levels. Please help.

Thanks, Josie
 

Read other answers
RELEVANCY SCORE 62.8

Just purchased an inexpensive HP printer (Deskjet 1000 J110a). In the past I've done a lot of printing, on 2 different printers, from PhotoImpact Pro 13--without problems. But with this new printer, while the image on the print preview screen looks ok, it prints twice as wide as it should--but no taller. The problem does NOT extend to other software such as MS Word, Paint.

If I skip the print preview screen, it prints correctly. But then I can't re-size or move the image where I want it.

Any ideas?

Thx
 

A:HP Deskjet 1000 J100a Printer & PhotoImpact Pro13

SOLVED!

Found my own solution. Have to install & use the universal driver HP Deskjet 990c.
 

Read other 1 answers
RELEVANCY SCORE 49.2

I have very old J110 7396-47g with Pentium D 925 and need new BIOS for upgrade it to Core 2 Duo CPU.Found this document, but link to my BIOS not work:https://support.lenovo.com/il/en/documents/migr-67648And in EOL section only old BIOS from 2007:http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/2oyg44usa.exe (2OKT44A)Please help me to found my new old BIOS

Read other answers
RELEVANCY SCORE 48.8

I have had a deskjet portable printer for years. After refilling the black cartridge last time, it suddenly stopped printing. I went through all the online help sites I could find and tried many things, like stopping and restarting print spooling, reinstalling the printer, and even bought a new black and color catridge. So, still having the probs after installing the new carts, went and tried lots of things again - uninstall, reinstall, etc. Finally, disabled bidirectional support and removed the color cart. Now it is printing as slow as a wet week. But at least I know the rollers are feeding the paper. I was getting "paper out" messages and "printer offline". Any help really appreciated.
Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P9400 @ 2.40GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4047 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 4 Mb
Hard Drives: C: 148 GB (30 GB Free);
Motherboard: Dell Inc., 0D201R
Antivirus: Avast Antivirus, Enabled and Updated
 

Read other answers
RELEVANCY SCORE 48.4

Attempts to boot then comes up with this error after ing attempting repair not really understanding what it is asking for. Here is the error https://m.imgur.com/a/bVqo8

Read other answers
RELEVANCY SCORE 48.4

Attempts to boot then comes up with this error after ing attempting repair not really understanding what it is asking for. Here is the error https://m.imgur.com/a/bVqo8

Read other answers
RELEVANCY SCORE 48.4

I have a deskjet 722C that is ridiculously slow on my 400MHz pentium2 256MB ram system!

I have pared down on fonts; updated to new driver, disabled bi-directional communication and the silly "status monitor" that HP recommended on their web page and still,...within word, from MSIE, it is slow. It used to be very fast when my computer was new but it just kills me now!

UGH! HELP!
 

A:PAINFULLY SLOW Deskjet HP722C

Disabling bidirectional support will actually slow down your printer.

Slow printing is like anything else on your system... a good defragging will probably help. If your drive is badly fragmented or nearly full (or both) it will drastically slow down print spooling. Background processes can also slow down the entire system.
 

Read other 3 answers
RELEVANCY SCORE 48

Windows 7 / HP Deskjet 5550:  Printer has been working fine, but for some unknown reason it has decided to change over to Excruciatingly Slow Printing Mode:  instead of hearing the carrier busily scurrying back and forth, it now trundles once
across, then takes a long rest, then heads back the other direction.  Now, I'm getting on up in those "senior years" and so my walk-abouts and hikes are becoming more and more like that too . . . but after running HP Print & Scan Doctor
and trying every reset procedure I know of, the 5550 is not up to speed here; replaced the USB cable, but that made no difference; have gone through the "HP Printers - Slow Printing (Windows)" page of instructions, but nothing there made any difference.

Any suggestions toward a solution?

Many thanks.  Appreciated.

Read other answers
RELEVANCY SCORE 47.2

Windows 7 / HP Deskjet 5550: Printer has been working fine, but for some unknown reason it has decided to change over to Excruciatingly Slow Printing Mode: instead of hearing the carrier busily scurrying back and forth, it now trundles once across, then takes a long rest, then heads back the other direction. Now, I'm getting on up in those "senior years" and so my walk-abouts and hikes are becoming more and more like that too . . . but after running HP Print & Scan Doctor and trying every reset procedure I know of, the 5550 is not up to speed here.

Any suggestions toward a solution?

Many thanks. Appreciated.
 

Read other answers
RELEVANCY SCORE 47.2

Yesterday I installed an HP Deskjet D1460 printer and its software from the installation CD. Since then, Excel and Word both take an unusually long time to load, say 15-20 seconds. I have an HP Pavilion Desktop PC, and am running Windows XP and have been keeping current on Windows updates.

The TruCrypt encryption application is also slow to mount.

I've uninstalled the HP drivers associated with the Photoshop and image, but haven't touch the other HP drivers. Has anyone else seen this issue? How would you suggest I handle this?

Thanks

A:Slow Ms Office Apps After Hp Deskjet 4160 Installation

I had issues with HP drivers at work slowing all of my users office apps to the point that it would take 1-20 minutes to open a single page document. I ended up changing all of the drivers to use HP Universal Print Driver for Windows - PCL 5 after that everything was OK. took me an entire month to troubleshoot

Read other 1 answers
RELEVANCY SCORE 46.8

Hello!I think my computer is infected with maleware. I have a lot pos .tmp files on my C-drive, the internet is running slow (explorer and firefox) and it takes me almost 10 minutes to start my computer.Lately I can barely use My computer. I also have "Windows update "and "Help and support center" on my desktop, and I can not delete it.I have Trend micro security 14 instaled, I scanned my computer with AdAware and Spybot (i could not delete files, wich Spybot found, a blue screen appeared). I did not scanned my computer with Kaspersky, because I could not connect.-----------------------------------------------I run DSS, and this are the logs:----------------------------------------------------------------------------------------------Deckard's System Scanner v20071014.68Run by kocevari on 2008-04-11 19:42:53Computer is in Normal Mode.---------------------------------------------------------------------------------- System Restore --------------------------------------------------------------Unable to create WMI object; The operation completed successfully.Backed up registry hives.Performed disk cleanup.-- HijackThis Clone ------------------------------------------------------------Emulating logfile of Trend Micro HijackThis v2.0.2Scan saved at 2008-04-11 19:46:30Platform: Windows XP Service Pack 2 (5.01.2600)MSIE: Internet Explorer (6.00.2900.2180)Boot mode: NormalRunning processes:C:\WINDOWS\system32\smss.exeC:\WINDOWS\system3... Read more

A:1000 Pos Tmp Files And Red Cross On C, Runs Slow

Hello tadej1,Are you running two antivirus programs? Trend Micro antivirus and Symantec/Norton Antivirus?If so, then uninstall one of them. I (as well as MicroSoft, McAfee and Symantec) recommend that you DO NOT have more than one anti virus product installed and running on your computer at a time. The reason for this is that if both products have their automatic (Real-Time) protection switched on, then those products which do not encrypt the virus strings within them can cause other anti virus products to cause "false alarms". It can also lead to a clash as both products fight for access to files which are opened again this is the resident/automatic protection. In general terms, the two programs may conflict and cause:1) False Alarms: When the anti virus software tells you that your PC has a virus when it actually doesn't.2) System Performance Problems: Your system may lock up due to both products attempting to access the same file at the same time.Please download the OTMoveIt2 by OldTimer. Save it to your desktop. Please double-click OTMoveIt2.exe to run it. Copy the file paths below to the clipboard by highlighting ALL of them and pressing CTRL + C (or, after highlighting, right-click and choose copy):

C:\pos*.tmp /D
%userprofile%\My Documents\pos*.tmp /D
%appdata%\My Documents\pos*.tmp /D

Return to OTMoveIt2, right click on the "Paste List of Files/Folders to be moved" window and choose Paste. Click the red Moveit... Read more

Read other 24 answers
RELEVANCY SCORE 46.8

Hi - im not too sure where to start looking for this one so any help or guidance would be appreciatted.
I have a dell vostro 1000 - vista home premium 32bit - 2gb ram - and for sometime now it just runs very slowly, in any of the applications i use. I run google deskside bar to have a view on actvity and right now cpu is 56% and memory is 55%
Can i have some starters to try and get my laptop working to a workable level again!!
Thanks
Rog

A:Dell Vostro 1000 - running slow

Slow Computer-browser Check Here First; It May Not Be Malware - http://www.bleepingcomputer.com/forums/topic87058.html

I would start with removing/disabling all unnecessary browser add-ons.

Louis

Read other 1 answers
RELEVANCY SCORE 46.8

Help!

I have a Dell Inspirion E1505 I purchased in the summer of 2006. Last year, I put in a new hard drive, doubled the amount of memory, replaced the keyboard, and put in a new CD/DVD drive. It's currently running XP.

Lately, especially with the wireless, my computer has been acting funny. Slow, very slow to open up new tabs in Internet Explorer. The other day it was SO slow I decided to restart it and see if that helped. It started up fine, but when I tried pressing "Start" to open back up Internet Explorer it was frozen. At this point I decided to reboot and run a diagnostic. This is what I got:

DST Short Status Test
Test results: Fail
Error code 1000-0146
Message: Unit0: IDE status failed
Status byte=64 Control code=1
Message=no additional sense information

Test results: Fail
Error code: 1000-0141
Message: no drive detected
I haven't done anything since I got that result (as in, my computer is still on and on this diagnostics page)

What should I do?
 

A:DST Short Status Test, 1000-0146, 1000-0141

Test results: Fail
Error code: 1000-0141
Message: no drive detectedClick to expand...

Looks like the hard drive has failed again, you could however remove and reinsert the drive to see if that gets the drive detected again, most likely a failed hard drive.

http://support.dell.com/support/edocs/systems/ins6400/en/sm/hddrive.htm#wp1123687

.
 

Read other 1 answers
RELEVANCY SCORE 46.4

This is a builtin device to motherboard, Intel server S875WP1-e

I tried different cables, and moved switch next to PC. I also tried Ubuntu.
The cables do work at gigabit speeds.

So does anyone know why?
It is enabled in the bios. And latest bios p18 is installed.

I tried installing the intel win32 drivers for ethernet, and it errors saying there are no intel adaptors are present, yet they are. This board has 2 builtin Intel ethernet controllers..

A:intel pro/1000 ct gigabit ethernet never can connect at 1000 only 100

What is the make/model of the switch? Is the switch gigabit capable?

Read other 9 answers
RELEVANCY SCORE 46.4

A co-worker asked me to help her clean up her Dell Inspiron 1000 Laptop that's been running very slowly/not at all. After running a Defrag, AVG anti spyware and antivirus, as well as Uniblue Registry Booster and SpyEraser, the system is slightly faster, but still running slowly. I hope someone can help me find anything else that might be lurking on her system and slowing things down. Here's the Hijack this Log:

Logfile of HijackThis v1.99.1
Scan saved at 11:39:14 PM, on 10/3/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
c:\program files\mcafee.com\agent\mcdetect.exe
c:\PROGRA~1\mcafee.com\vso\mcshield.exe
c:\PROGRA~1\mcafee.com\agent\mctskshd.exe
C:\WINDOWS\system32\oodag.exe
C:\WINDOWS\system32\sdpasvc.exe
C:\Program Files\Analog Devices\SoundMAX\spkrmon.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\WINDOWS\System32\wltrysvc.exe
C:\WINDOWS\System32\bcmwltry.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\oodtray.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\avgas.exe
C:\WINDOWS\System... Read more

A:Helping friend with slow Dell Inspiron 1000

Hi Tronk,

There isn't anything really going on in your logs. Just a few registry entries and a program to get rid of. I personally wouldn't run any of those registry cleaners/boosters on my computer because they usually create more problems in the long run.

--------------------------------------------------------------

Open HijackThis and click on 'Do a System Scan Only'. Check the following entries (If they still exist, make sure you do not miss any)

R3 - URLSearchHook: (no name) - - (no file)
O2 - BHO: (no name) - {A7327C09-B521-4EDB-8509-7D2660C9EC98} - (no file)
O3 - Toolbar: (no name) - {F8AD5AA5-D966-4667-9DAF-2561D68B2012} - (no file)

Please remember to close all other windows, including browsers then click Fix checked.

--------------------------------------------------------------

Click > Start > Control Panel > Add / Remove Programs and uninstall the following programs (if they exist):

Viewpoint Manager <<<this is considered foistware instead of malware since it is installed without users approval, but doesn't spy or do anything "bad". Read this article: http://www.clickz.com/news/article.php/3561546

** If there are any other Viewpoint programs, then uninstall those also **

Additional info: http://vil.nai.com/vil/content/v_137262.htm

--------------------------------------------------------------

Perform an online scan with Internet Explorer with Panda ActiveScan Click on located at the bottom o... Read more

Read other 3 answers
RELEVANCY SCORE 43.6

Hello,pleased to meet you all.
Is there any freestuff available, I need a driver for the printer.
Regards.
 

A:[SOLVED] hp deskjet 3420

Hi and welcome.

HP would be the best bet

http://h20015.www2.hp.com/en/taskPa...et375040&pagetype=software&docparent=software
 

Read other 3 answers
RELEVANCY SCORE 43.6

I'm getting a Warning for low ink in my color cartridge. I've installed a new one and aligned them. The Estimated Ink Level shows full.

Does anyone know how to clear the Warning?

Thanks in advance
~Mz
 

A:Solved: HP deskjet 940c

There should be a Setup, or menu button on the printer with a little window. Click and follow instructions show.

Or try HP support: http://h20015.www2.hp.com/en/siteHo...XGR3UOSQ?reg=na&cc=us&pagetype=sitehome&lc=en
 

Read other 1 answers
RELEVANCY SCORE 43.6

Please / Thanks: Windows XP 5.1 SP3; just got the HP printer noted above; it's been sitting in an office for about five years, lonely; worked fine, she says; downloaded/installed what I could e-locate for the model; my PC tells me all is well with the newbie, but when it comes printtime, the paper moves through appropriately, the appropriate sound of the ink mechanism moving back and forth is heard, but the grand result is, merely, a blank sheet of paper. The ink cartridges and electroconnection points are clean and dry.

Shall I conclude that the souls of the ink cartridges have flown the bodies after having been unattended and unused for such a length of time? Haven't tried new cartridges yet. Or is there something else I should be attending to?

Thanks / appreciated.
 

A:Solved: HP Deskjet F340 All-in-One

I have a HP Deskjet F340 All-In-One and have used it through Windows ME and XP and Vista and 7, so it has served me well for several years.

If yours has been stored unused for 5 years, the ink cartridges definitely need to be replaced.

Here are pictorial instructions on how to replace them.

It uses HP 21 black and HP 22 tri-color cartridges.

----------------------------------------------------------
 

Read other 3 answers
RELEVANCY SCORE 43.6

I think I'm missing some software for the HP F4235. Basically, when copying, I want to adjust the contrast, etc. I can get to the dialog box for printing, which is part of the Windows XP program I believe. Everything I read at the Hp website and Deskjet help leads me to believe I'm supposed to be able to access another dialog box for printing, scanning and copying (and adjust the settings).

I think this is Photosmart? I downloaded photosmart and tried to install it, but it says I have a newer version and quits. I can't access this program. My menu, under HP, just has help items. The TaskBar has "Launch/Show Director" but will not launch.

If Photosmart is what I'm looking for, I was thinking about deleting everthing to do with the printer and try to reinstall it???

Thanks, Brian
 

A:Solved: HP DeskJet F4235

Fixed it. I was missing Hp Solutions.

Thanks
 

Read other 1 answers
RELEVANCY SCORE 43.6

Hi All
I have an hp deskjet 340 and the driver that comes with windows does not work. I have tried to uninstall and install and it is still not working. I read somewhere to change the driver to an hp deskjet 310 and it still does not work. When I print a test page it is all garbled. Any help you can give me is greatly appreciated.
 

A:Solved: hp deskjet 340 driver for win xp

Read other 10 answers
RELEVANCY SCORE 42.8

ok, got this beast for free, plugged it in, loaded drivers, went to print a test page and, there is some clicking noise, it loads a sheet of paper and then the yellow resume light flashes, no pattern, just constant blinking. A little later a message comes up on the monitor saying print failed blah, blah, etc.. I cancel the printing jobs, and the printer spits the blank sheet out.
Of course I'm thinking it was free for a reason, but it came from my wife's boss, he's replacing some printers and he's giving some of the old ones away, so is it busted, or am i missing something here.
 

A:Solved: HP Deskjet 648C won't print

Read other 9 answers
RELEVANCY SCORE 42.8

Yes I Have A HP Deskjet F4100 All-In-One Printer & I'm trying To Install It On A Computer With Windows ME.. Is There Anywhere I Can Get A Compatible Driver??
 

A:Solved: HP Deskjet F4100 All-in-One Printer

Read other 7 answers
RELEVANCY SCORE 42.8

My HP deskjet 2210 won't print it does scan but it will not print. Cleaned everything ran the tests... Weird thing is that when I put the installation disc in it said it didn't support Windows 7..???

What can I do?? I need to print out something badly...

Also when I try to pull up printers and devices in control panel it takes forever!!

Please help!!
 

A:Solved: HP Deskjet 2210 won't print

I think that unit was introduced at least 1 1/2 years ago, so it makes sense that the included disk would not have Windows 7 support. Suggest you remove/delete whatever you have and install it fresh using the latest package.
 

Read other 1 answers
RELEVANCY SCORE 42.8

I have recently reinstalled my printer software, uninstalled, and reinstalled again, and it still won't work. I get the error message theres no comunication to my printer all though it printed out the aline and test page, I have win 98 SE, Internet exp.5 itys acting really strange. I just put two new ink cartraiges in it. Any one got any ideas on this one?
 

A:[SOLVED] HP Deskjet 672C Printer

Read other 8 answers
RELEVANCY SCORE 42.8

Parallel Cable...Printer is listed as default in Control Panel. LPT 1 port in properties. But no LPT 1 port listed in Systems..only COM port when I expand "Ports"...New motherboard yesterday. As soon as I try to print I get error message.."failed to print". Went to HP to download drivers...HP says no HP or Compaq products installed and nothing available in my language!!! Beats me. Any help? New cable maybe?
 

A:Solved: HP Deskjet 932C won't print

Read other 6 answers
RELEVANCY SCORE 42.8

I got this Printer new (HP Deskjet F218) and the scanning works and actaullt makes copies, but when I tried to print something from Microsoft Word 2007 a problem occurs saying " Windows cannot print due to a problem with the current printer setup "

And some thing with Microsoft Excel , an error reading, " Your file could not be printed due to an error on HP Deskjey F2100 Serie on s. There are several Possible Reasons:

There may not be enough memory available. Try closing files and programs you aren't using.

If you use a network for printing, there may be a problem with the network connection or the printer driver.

THere may be loose cable or a bad connection between your computer and the printer.
I've isntalled the HP Deskjet F2100 program twice and it still brings in the same error. The usb is connected correctly. The scanning works because I copied some images onto the computer so there must be a problem somewhere... The printer is connected straight to this computer and is not being used via network connection. I am Running Vista Ultimate with the specs:
Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2 CPUs), ~2.3GHz
2046MB RAM
Gigabyte Motherboard
NVIDIA GeForce 8600GT

If the extra info helps lol
Printer is new got it couple of days ago.
 

A:Solved: HP Deskjet F2180 Problem

ive solved this problem easily, im returning it from where i got it from and get my money back haha! nice and simple, there shouldnt be any complications with installing a simple printer! that comes with a cd.
 

Read other 1 answers
RELEVANCY SCORE 42.8

After a long time of inactivity, and with the help of a member of the Tech Guy forums here, I was able to re-avtivate my HP Deskjet 5550 printer. But it seems, there is one more problem to be solved: the paper is not reached by the pulling wheels inside.

I suspect a missing part here. Please have a look to the two photos showing the empty paper tray (I removed, for better visibility, the outlet tray), and the same tray filled with some paper. The papers are on the ground, but the wheels above them which should pull them into the mechanics of the printer, are not touching them. Thus my suspicion of a missing part.

Is there anyone who can assist me? It is so frustrating to had to wait six years to use this printer again (HP does not offer support nor even any response to help requests to people from Jamaica), and now to face a second problem just after the first problem of a missing cable was solved.
 

A:Solved: HP Deskjet 5550: Paper not fed in

Read other 13 answers
RELEVANCY SCORE 42.8

I am trying to help a lady next door she has windows 98 SE and the hp deskjet 648C printer, well her printer has been acting up so I went in and deleted the default printer and was going to reinstall it, well find out she hasn't got a cd for it so I get into it and click on hp and it gives you all the different kinds but there is no deskjet 648C what can I do, also if I get that fixed I think her driver might have been corrupted will that take care of that also, cause I could nt find a driver for a 648C euither when I clicked on the new driver, please help me get it reinstalled what can I do???
 

A:Solved: HP Deskjet 648C Please help me fast-Please

Read other 6 answers
RELEVANCY SCORE 42.8

Hi All,

I have a F2280 running on Vista and I can't get the thing to print a page. It's connected to a Vista laptop and was working fine until the laptop started having a few issues. It turned out it was missing a load of Windows updates but once they were all on the printer stopped working. I uninstalled the drivers and reinstalled with the most recent ones from the HP website with no luck. All the HP diagnostic software reports all of its tests are fine.

When I try and print the page goes to the queue and stays there reporting "Printing" but the printer never does anything (this includes from the test page option of the printer options)

The printer can print its own test page (by holding down a combo of buttons)

The scanner works as does on printer copying

The installed HP software is capable of making the printer print an alignment page, cleaning the heads and knows how full the cartridges are

It's incredibly frustrating that the computer / HP software reports that everything is fine, I've run the helper software and it could suggest nothing and I've tested the printer on a Windows 7 machine and it's fine.

Any thoughts - I'm out of ideas.
 

A:Solved: HP Deskjet F2280 / Vista

Read other 8 answers
RELEVANCY SCORE 42.8

I just bought an HP Deskjet F4185 and have tried to install it but keeping getting a USBSTOR error message. It says that the file usbstor.inf is the incorrect version, reinstall windows. the correct version is 5.1.2600.0. I did everything including reinstalling service pack 2 and still cannot get the 5.1 version, HELP!!! How do I update this file and install my printer
 

A:Solved: HELP installing my HP Deskjet F4185

Checkout: http://h10025.www1.hp.com/ewfrf/wc/...&product=421635&printable=yes&encodeUrl=true&

It looks like it has the information you need.

Good luck and let us know how you make out.
 

Read other 3 answers
RELEVANCY SCORE 42.8

Hello again all and welcome to another installment of: "how incompetent is James?" I received some cracking help from this forum and Triple6 last time i had a problem (http://forums.techguy.org/t248651.html) and am back begging for more (notice i never just drop round to say hello and have a nice cup of tea and a chat).

Anyway, about 6 months ago i got a new printer, a HP deskjet 3650. IT installed fine and has printed OK. Quite soon however i started receiving an intermittent error. The banner labeled the programme Hposm (i do not know what this is but presume it is to do with the printer due to hp prefix) and said that it had committed an illegal operation. The full details of the error are:
__________________________________________________________
HPOSM caused an invalid page fault in
module KERNEL32.DLL at 0167:bff9db61.
Registers:
EAX=c00309c4 CS=0167 EIP=bff9db61 EFLGS=00010202
EBX=0066f90c SS=016f ESP=0056fed0 EBP=0057016c
ECX=00000000 DS=016f ESI=00000000 FS=3eef
EDX=bff76855 ES=016f EDI=bff79198 GS=0000
Bytes at CS:EIP:
53 8b 15 e4 9c fc bf 56 89 4d e4 57 89 4d dc 89
Stack dump:
___________________________________________________________

Following my usual ethic of "why put off until tomorrow what you can put off until the day after that" i boldly ignored it, closed it each time it occurred and carried on as normal. Now however it appears each time i start the PC within seconds and will not close, it just keeps coming back up. Not only is this... Read more

A:Solved: Hp deskjet 3650 illegal op

Read other 16 answers
RELEVANCY SCORE 42.8

I have widows 98, a Dell Latitude XPi CD laptop and an HP Deskjet 648C printer. I started getting an "out of paper" error message with a full paper tray. For a while I was able to coax it into printing an entire document but the resume light always started blinking when it finished. Then I started getting the message as soon as it loaded the paper into position to begin printing. Occasionally it printed a few lines and once it printed all but the last couple of lines of the document but never a complete doc. It makes harsh sounds when it tries to engage itself. It doesn't matter what program I'm printing from or from a website. I've tried numerous "fixes" suggested by HP Tech support t (including removing power cord and usb/parallel cable as well as pressing and holding the power button while pressing the resume button 5. 7. 9. or 12 times trying to get it to print a test page, clear itself, etc. to no avail. I am in no position at this time to buy a new printer (lost job, home, and mate) and need printer desperately.
Any suggestion are welcome and appreciated.
Thanx and Merry Christmas to all you techies!
Amelie
 

A:Solved: HP Deskjet thinks its out of paper

Read other 12 answers
RELEVANCY SCORE 42.8

My husband and I just bought a HP 3050A Deskjet printer. We do a lot of scanning and the scan-preview window is so small it's impossible to see to modify the settings (such as brightness or contrast). Often we scan documents with small writing or hand-drawings where without tinkering with the settings nothing is legible.

Is there a work-around for this or some way to zoom in on the tiny scan-preview window? Thanks.
 

A:Solved: Scanning in HP 3050A Deskjet

Here is the support site for the HP Deskjet 3050A e-All-In-One printer.

The "Solve a problem" and "How to" sections may be helpful to you.

------------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 42.4

Recently installed a HP Officejet 7310 in my own PC system and gave my old HP DeskJet 722c to my son. His PC with MS2000 doesn't have the driver listed. Their PC is primarily a game system not tied to the internet. Printing is a sometime but necesry function. Simply I need a driver download to put on a CD. Any ideas?
 

A:Solved: Misplaced startup CD for HP DeskJet 722C

Just download the driver from HP http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=DeskJet+722c&submit.x=3&submit.y=6
 

Read other 3 answers
RELEVANCY SCORE 42.4

Thx in advance for input :

error writing to LPT 1
unknown system error

comments : I have external Iomega Zip drive and HP ScanJet 5P as part of my system. The printer starts to print word document and stops mid stream. In the past I have shut down computer, restarted and it works. I'm thinking of uninstalling printer and scanner and reinstalling. In the past I have had .dll error messages(I may have inadvertently deleted some .dll a while back when moving scanner files from C drive to Zip drive, my system has never been the same since.) Your consideration is appreciated and lunch is on me if we ever meet.
 

A:{SOLVED} HP Deskjet 722C print problem

Read other 12 answers
RELEVANCY SCORE 42.4

Moved my HP Deskjet 5550 from win 98 to XP using a parallel to USB cable. Obtained latest drivers and installed. Test print and calibration both correct but won't print out anything but first centimeter on page before ejecting in any other application. Print preview (even the HP supplied one) shows one page correctly but print queue lists it as 3 pages!

Is this to do with XP the cable or what? Have uninstalled and reinstalled - same problem. Have checked page set up in application and printer and all appears correct.

Can't understand why test page correct but nothing else!

Any help welcome!
 

A:Solved: Deskjet 5550 won't print properly

Umm... okay, when you say 'parallel to USB', do you mean a USB/Parallel adaptor? If so, why not just use a USB cable, since the 5550 has an either/or system? (I have 2 of these machines, one of which is plugged into two computers - one through the parallel, one through the USB.)

Remember though, since the 5550 has both jacks available, you have to chose which setup to use when doing so. If you are using a parallel to parallel hookup, the printer has to be plugged into the parallel jack and powered on while the software is being installed. If you're trying to plug it in via a USB to USB connection, you must install the software BEFORE plugging the machine into the USB jack - the install will tell you when to plug it in. If you are using a USB/Parallel adaptor, ITS OWN software must be installed first. The adaptor then needs to be plugged into the computer, and THEN you plug the printer into the adaptor and power it up, followed by installing the software via the Parallel to Parallel method.

Now, the other thing to remember is to either use the 5550's install disk to remove the software, or simply delete the 5550's icon from the Printer's and Faxes listing on your Control Pannel. I do NOT reccommend using "Add or Remove Software" for printers, since this program can remove too much, such as registry information from Windows.

Good luck!

A-N
 

Read other 2 answers
RELEVANCY SCORE 42.4

The printer is a usb printer several years old.

I'm not sure why my printer port says 'ECP printer port (LPT1).
I don't know what ecp means.

I had this printer working but then put in a new hard drive. I downloaded the driver from hp and ran it. I saw the printer in the printers' windows set as the default printer. But I get an error message saying the document failed to print.

When I unplug from the computer the USB to the printer and then plug it back in, I hear a tone. But I don't see a message saying new hardware found when I have uninstalled the ecp printer port (LPT1). Also the hp software doesn't detect the printer when installing the drivers for it.

I went into the registry and deleted hp deskjet 6122 in two places and then reinstalled after several attempts at trying to upgrade the driver to the one from hp and also from running the hp setup program to install the printer.

Should the printer usb cable be unplugged when running the HP software to install the printer if the ecp printer port (LPT1) device is removed?

Should I change the port from 'ecp printer port (LPT1)' to 'printer port (LPT1)?

Should I uninstall all my usb ports and then re-install them?
 

A:Solved: HP deskjet 6122, ECP printer (LPT1)?

Read other 7 answers
RELEVANCY SCORE 42.4

For some reason when I started to use the above printer today I got the error message up about the spool subsystem app not running. I googled the message and have tried everything to get it working that was on the Microsoft website. I have stopped the spool running and restarted it to no avail. I booted up in Safe mode and proceeded to follow the instrucions on MS `s site deleting all the registry keys it stated, but it still keeps appearing, can anyone please help me?

I am running XP Home SP3, and until this morning was running fine..
 

A:Solved: Hp deskjet cannot print (spool error)

Read other 8 answers
RELEVANCY SCORE 42.4

Hello everyone
Im helping out a friend with a pc printer issue and im lost. the printer is a hp deskjet 940c and i cant get it to install at all. It comes up with a error message saying that the printer is not installed operation could not be completed. I ave tried everything from just a corp driver to the home driver and uninstalling the ports and everything i could think of. I have succefully installed a different printer on this pc and i was able to install the hp on 2 of my pc 1 on xp home and the other on xp pro. So it leds me to believe that the printer and the drivers are ok. Im just lost any help would be great thanks.

the pc is XP Home sp2
wth all current updates
 

A:Solved: deskjet 940c install issue

Read other 14 answers
RELEVANCY SCORE 42

Hello, I am new to this site and really hope for some help on following subject:
I have Yamaha YSP-1000 Digital Sound Projector and I would like to connect my Dell XPS 410, so i can enjoy my extended collection of Jazz music.
Any suggestions?

Thank you!

Rollerman

Below is the information about my PC:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz, x64 Family 6 Model 15 Stepping 2
Processor Count: 2
RAM: 3069 Mb
Graphics Card: Radeon X1300/X1550 Series (Microsoft Corporation - WDDM), 256 Mb
Hard Drives: C: Total - 466535 MB, Free - 168088 MB; D: Total - 10239 MB, Free - 10120 MB; H: Total - 1907726 MB, Free - 28096 MB; K: Total - 1907726 MB, Free - 929594 MB;
Motherboard: Dell Inc., 0WG855
Antivirus: Norton 360, Updated and Enabled
 

A:Solved: Connecting PC to Yamaha YSP-1000

Hi Rollerman, and welcome to TSG.

From what I have been able to find on-line, your computer has a digital audio optical (S/PDIF) output and your sound bar has 2 optical inputs. A matching optical cable connecting the two should give you the best audio performance. You will need to make sure that the digital output is enabled in the computer's settings and the correct optical input is selected on the sound bar.

http://support.dell.com/support/edocs/systems/xps410/en/SM_EN/specs.htm
http://usa.yamaha.com/products/audio-visual/digital-sound-projector/ysp-1000_black__u/?mode=model
 

Read other 3 answers
RELEVANCY SCORE 42

I picked up A viewsonic viewpad 1000 at a garage sale and everything works ok except the wifi I tried reinstalling the driver but to no avail I'm running windows xp tablet edition on it.
The wifi Icon shows up in the task bar and it will even connect completely but it wont show any web pages it uses a 802.11 11mbps wireless lan pci card
 

A:Solved: Viewpad 1000 wifi

Read other 11 answers
RELEVANCY SCORE 42

I'm trying to install my new webcam- microsoft LifeCam VX-1000 and it keeps coming up with this message: Set up cannot continue because an unexpected error has occured. http//support.microsoft.com/kb/953691. and then I have to press ok and it all shuts down... what does this mean and what can I do about it?
 

A:Solved: microsoft lifecam vx-1000

Welcome to TSG!

What OS are you running?
Which of the steps in the KB article the error message referred you to have you tried?

Most likely just need to download an updated driver from the download center, the link is in Step 2 under Method 1.

http://support.microsoft.com/kb/953691
 

Read other 2 answers
RELEVANCY SCORE 42

Hi guys

i'm upgrading my network to 1gb

i got NICs for all computers, and now my question is, do i have to get a 1000 hub also?

i'm almost sure that i do, but then my other questions is, there's 2 1000 ports on my hub
what are they for?
and is there any way around buyng the 1000 hub, and just doing something with those 1000 ports that i already have on the hub
thank you
 

A:Solved: upgrading my network to 1000

Read other 16 answers