Over 1 million tech questions and answers.

Computer immediately boots into Startup Repair

Q: Computer immediately boots into Startup Repair

Hi,

So, I have a computer that I have to give to someone. The problem is, that every time I boot the computer up, it shows "Starting Windows" for just 1 second and immediately boots into Startup Repair. Startup Repair then fails to fix the error, but from the info I got, it seems that the registry is corrupted.
The things I have done:

1. Copy new files from the DVD to the config folder - Nothing changed.
2. Check the HDD for problems. Seagate SeaTools - Passed the long and the short test.
3. Check the RAM - Memtest86+ v5.01 - no errors.
4. How I got the error: First, I tried to install SP1, but it rolled back. Second, then I installed the drivers for the computer and restarted every single time it asked. Tried SP1 again, but this time I got this issue.

System specs for that computer are after slashes (for every part).
Sorry for any grammar mistakes.
P.S. Can't access the CMD from anything (From Startup Repair, from DVD).

RELEVANCY SCORE 200
Preferred Solution: Computer immediately boots into Startup Repair

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Computer immediately boots into Startup Repair

Hi Haexagon,
As the comp hasn't got SP1 on it, and your passing it on.
Why not clean install, dont forget to change Bios order to DVD as first boot option.

Roy

Read other 3 answers
RELEVANCY SCORE 96.8

So lately my computer's firewall has decided to not work so I searched around and eventually concluded on doing a upgrade reinstall.
As I didn't want to lose any of my files, drivers or programs.
All seemed like it went well until the computer rebooted for the last time before it reaches the
" Setting up for first use " dialog
Though before this was able to happen the computer went into a reboot loop with bsod 0x0000001E

After a large amount of reluctant clicking
The computer NOW only boots to the System Recovery Options window and the ONLY option is Startup Repair ; There is NO command prompt no diagnostics, nothing,
Just Startup Repair, in which start up repair is unable to do anything and continues to loop itself with a Don't send dialog

I have tried inserting the installation disk and accessing the Repair Computer but it presents an incompatibility error.

I have no F8 menu at all, (no safe mode, which I can't access anyway because the computer can't set up for first use).

Need any Assistance, all is welcome, thanks.

A:System immediately boots to Startup Repair - No access to F8

Please fill in your System Specs in bottom left corner of your post.

Running any OS without having your files backed up is careless. Running a Repair Install or Reinstall without backing up your files is reckless.

You can try to rescue your files now using step 9 in Troubleshooting Windows 7 Failure to Start
however I doubt there is anything to repair since the reinstall aparently failed.

So I would skip to running Factory Recovery or getting the superior Clean Reinstall - Factory OEM Windows 7 (same for retail) which will yield a perfect install if you stick with the methods and tools given.

Read other 1 answers
RELEVANCY SCORE 79.6

Hello all i have a problem with my laptop running windows 7. When i turn on my laptop it says "windows is loading files" then it briefly shows as if windows is starting up, then a window sayin startup repair comes up that reads "startup repair is checking your system for problems" and then it says "startup cannot repair this computer automatically" i Don't get a start bar or anything i can't even see the desktop i have tried to start it up many times and i always get the same screens i will appreciate any help you guys may provide

A:Computer boots to startup repair and no farther

Hello.

In order to know which route we should take to properly diagnose your issue please answer the following questions.

How long has this issue been occurring?

To your knowledge, have you been infected with malware recently?

Have you made any recent hardware or software changes to the machine?

What is the last thing you did before the issue began?

~Blade

Read other 1 answers
RELEVANCY SCORE 68.8

I have a Lenovo 0578CTO running Windows 7.

My computer will only boot into the Startup Repair and then it says it could not detect a problem.

I view the diagnostic and repair details and there are no error codes, but the "Root cause found:" is "The operating system version is incompatible with Startup Repair"

I can go into advanced options for system recovery and support.

I tried a System Restore, but received the error 0x80071a91.

Any suggestions??

Read other answers
RELEVANCY SCORE 68.8

Hello,

recently I have bought new laptop Asus X52JC with i3 CPU , 3GB RAM, GeForce 310m etc. I installed Win7 Home Premium 32bits.
After a week computer began to hang up at windows 7 startup: "Please wait... message", no windows logo, full hdd activity and it stays here forever. I tried to launch windows repair, safe mode it just hangs with full hdd activity.
Only one thing worked: startup repair. It repairs computer about 2 hours and then it boots normaly. If i shut it down or restart, it works also. But next day, story begins all over again....
So, I reformated hard drive, reinstaled windows, all newest drivers from asus website and office with skype. Everything worked fine until the next day Problem is identical. The only one thing that is working for me now is startup repair. It repairs computer and works for one day

A:Boots to startup repair only

I downloaded Seagate tools for Windows and DOS. Both tests says:
Short DST - FAIL
Long DST - FAIL
Long Generic - FAIL

I guess my hardrive is bad...

Read other 1 answers
RELEVANCY SCORE 68

Hey,

Since yesterday I've been trying to get my pc (running Vista Home Premium x32) up and running again, after the 2nd bsod this week. After the first bsod my pc booted like nothing has happened, but now, whatever I try, it only boots into startup repair.

That wouldn't be a problem, but every time it "looks for problems" only to return that "Vista cannot solve these problems - click 'Ok' to shut down bla bla". I've been googling and found that the problem is more common, but nowhere have I found a good detailed solution. Many hints were given though, that it would be best to use a Vista recovery disc.

However, my DVD drive has never worked properly; even when it sees and detects the drive in the BIOS and Boot menu, and even when it's the only thing selected to boot from, it will still only boot to startup repair.

So I spent the rest of today making a bootable usb key. I followed instructions meticulously (I got a Vista Repair .ISO) and now my pc detects the key, and I can select to boot from it, and the first few steps go as they should (Select USB to boot in BIOS etc), as soon as I select that I want to load the Vista repair utilities, it continues to load as it's done all day and go straight to startup repair.

In other words, my pc will only go for startup repair, which does nothing good, regardless of what I do. It won't boot in safe mode, it won't boot from the Vista boot CD I made, it won't boot from my USB key, no matter what way I set my BIOS.... Read more

A:Vista only boots to startup repair

"I don't want to reinstall Vista and lose all my files"

That's why you should always have backups on a different drive, then re-installing Windows would always be an option without losing anything.

Read other 7 answers
RELEVANCY SCORE 68

Hello,

Windows will only boot into startup repair no matter what. The issue is startup repair was unable to fix the problem. Here is the log:

Problem event name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200782
Problem Signature 05: SystemDisk
Problem Signature 06: 8
Problem Signature 07: BadDriver
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Thanks!

A:Windows only boots into startup repair

Please try here http://www.sevenforums.com/tutorials/139576-startup-repair-infinite-loop-recovery.html

Read other 3 answers
RELEVANCY SCORE 67.2

Hello all,
I am looking for some advice on how to fix my computer please.
These are my specs:
Dell XPS 420 about three years old.
Windows Vista 32 bit running SP2 with OEM disc without SP 1 or 2
Raid mirror configuration
Shut down normally about three days ago, today went to start it up and it went immediately to Startup Repair which was unsuccessful.
I cannot boot into safe mode (no restore points found- I know they are there because I check them regularly)
I cannot boot from the OEM disc
Debugging mode does not work
Last known configuration does not work
I did boot into the diagnostics screen (F2 or F12, I can't remember) and it did a diagnostic on the hardware so I think my hard drives and memory are ok.
I tried startup repair again and it just now gives up after about 20 seconds and says it can't repair my computer.
When I try to 'start windows normally', it starts, the Dell logo comes up, the white bar loads, then the Intel Array info comes up, then the screen with the little green thingie runs back and forth then it goes to a really quick blue screen that says my computer is being shut down to protect it. It goes by so quick I can't read all of it but there is no information there that tells me anything about what is wrong.
I tried Startup repair one last time and when it said it couldn't repair my computer there were error details at the bottom of the screen:
Problem event name: Startup repair V2
Problem signature 1: Autofailover
Problem signature 2: 6.0.6000.16... Read more

A:Windows Vista boots into startup repair and can't fix it

Looks like a BSOD (blue Screen) Please follow instructions and we will see if we can help
Blue Screen of Death (BSOD) Posting Instructions

Read other 27 answers
RELEVANCY SCORE 67.2

hi all need some help please booted up pc yesterday and was found with a screen saying startup repair that runs for about 30 mins and then it will say startup could not detect a problem press finish to restart so i do and get the same thing over again, when i try to go to safe mode i get the same screen ??? i cant even do a restore , anyone got a clue whatto do please ??? running win7 and cant get pasted the startup repair screen

thanks

tryed the win7 disk to repair i get to the system recovery options it scans for a bit then i get operating system win 7 the partition size and location (c) local disk i then clink on win7 and press next then i get a pop up saying this version of system recovery options is not compatible with this version of windows you are trying to repair ???

can see all files and folders on hdd when asked to add drives

A:screen saying startup repair every time it boots

if you upgraded to sp1 after making the recovery disk you will need to slipstream sp1 into the win 7 disk with vlite

Download - vLite - Windows Vista configuration tool

Read other 3 answers
RELEVANCY SCORE 67.2

Title says it all. Tried everything in CMD on Recovery disc but it still does not work.
Im trying to fix the laptop for over a month now. I need it working as soon as possibile!

A:Windows boots into Startup Repair which cannot fix the problem

You might need to do a complete reinstallation.Do you have backups of everything you need on the system?

Read other 3 answers
RELEVANCY SCORE 67.2

Today, I decided to download SP1, since there was this application that required it. Anyways, it got downloaded without any problems, but while it was installing, it got stuck for over half an hour, but then completed the installation, which made me restart my PC.

However, after that, It booted into startup repair, telling me that Windows won't start and it couldn't fix any problems, which made me do a system recovery and boot up my PC, I also tried installing SP1 again, but had the same exact problem.

Here are the required data and If you need any more information, feel free to ask

I also didn't get any error codes.

A:PC boots up to startup repair after installing Windows 7 SP1

Hmm - not a common occurrence!
let's do a few basic checks before attempting another SP1 install

First - did you attempt the install from Windows Update, or from the standalone installer?


Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

Read other 5 answers
RELEVANCY SCORE 66.4

Hello,

My Windows 7 now refuses to boot properly and now only boots into startup repair. This started happening after I shrunk and moved the /dev/sda2 partition (on my computer, the C:\ drive), so I could install Ubuntu. I did notice that Windows failed to boot but I was stupid and didn't fix as soon as I realized. I installed Ubuntu (and with it, Grub) and now Windows just boots into Startup Repair which just says it can't do anything and then displays some HP software that gives me a few options (none of which has helped). It may be important to note that I have the option to go to the command prompt.

I have tried all the fixes I have found on the internet (such as the various bootrec.exe commands) to no avail and am becoming desperate! Please help!

Thanks, RibShark.

A:Windows 7 boots into Startup Repair after moving partition.

Quote:
Windows just boots into Startup Repair which just says it can't do anything


Silly question, but did you have the Windows OS Install Disc in the CD/DVD drive, when you were attempting to run the Startup Repair?

If not, please do that, ensure that your Boot Order is set to read discs (look in the BIOS) and try booting from the Windows disc again.

Also refer to Repairing the Master Boot Record via command prompt here.

Read other 7 answers
RELEVANCY SCORE 66.4

acer aspire, win7 home premium x64. it froze while using VLC (i had not downloaded or installed anything new), shut down, flashed a BSOD kernel error, then started an infinite startup repair loop. i have tried advanced boot options; all of them just begin running startup repair (which runs for hours and then hangs before it completes) except for debugging mode, which boots up just fine.

running a chkdsk now from the debug mode. previously i had put my HDD into an external so that i could run it through another comp and figure out if it was a hardware failure. the drive showed no filing system, so i ran recuva and backed up all the data. ran chkdsk /f and it repaired a couple bad sectors. then the drive opened normally, no errors. ran chkdsk R/ to be sure, but it hung on stage 4 for 8 hrs so i ended the process.

after replacing the hdd into the aspire and figuring out that i can boot into debugging mode, i'm re-running the chkdsk. it seems to have frozen again. is this an indication that the HDD is failing? should i just replace it and re-install win7?

A:startup repair loop - only boots into debugging mode

Hello hyukj,

You might see if this may be able to help with the startup repair loop.

Startup Repair Infinite Loop Recovery

Hope this helps,
Shawn

Read other 4 answers
RELEVANCY SCORE 66.4

When computer boots up, it automatically goes to the Startup Repair tool, which searches for a problem but then concludes that it "cannot be automatically repaired".

I've tried booting in Safe Mode, same problem. I've also attempted to recover the "Last Known Good Configuration" but that hasn't given me any success either.

After the Startup repair tool fails to repair the problem I can view the details of the problem--it provides me with the following list.

Problem Signature:
Problem Event Name: Startup Repair V2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6000.16386.6.0.6000.16386
Problem Signature 03: 6
Problem Signature 04: 917518
Problem Signature 05: BadPatch
Problem Signature 06: BadPatch
Problem Signature 07: 0
Problem Signature 08: 3
Problem Signature 09: WrpRepair
Problem Signature 10: 10
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033

I have attempted the following tasks (which didn't solve the problem):

1.System Restore - Result: Cannot find a previous restore point

2.Windows Memory Diagnostic Tool - Result: No problems found,
system reboots, and automatically goes to "Startup Repair" - Gives
the same dialog of problem details listed above.

3.Command Prompt - Result: tried bootrec /fixboot & bootrec
/fixmbr, but after restart it automatically goes to "Startup
Repair" - Gives the same dialog of problem details listed above.

4.Chkdsk - Result: No bad files or er... Read more

A:Please Help -- Vista boots directly to Startup Repair Tool ...

I had the same problem with my Acer Aspire 6920G laptop. I finally used a Apricorn Live Wire and connected the hard drive directly to my desk top. I was able to see some files but none of the Picture files I had downloaded to the computer. I made an image of the drive using the supplied EZ Gig II software that came with the Apricorn hardware. I will return the computer to where it was purchased and hang on to the image in hopes that the future may advance something that will allow me to recover the data. I know that this doesn't help much......I posted a note like yours I think on Sunday but have not received any replies.

Tim

Read other 1 answers
RELEVANCY SCORE 66.4

Hello,

First of all, thanks anyone for your help. I've come here twice over the last few years and gotten awesome help both times.

My parents laptop is having a problem I can not fix.

It's running Vista, I'm not sure which version.

Unfortunately my parents arent very computer savvy, so weren't helpful as to what caused the issue.

When I turn on the laptop it boots straight in "Startup Repair" window, "Startup repair is checking your system from problems" . This is the only window. The rest of the screen is blue. No task bar or start button or anything. After it runs, a new window pops up "Microsoft windows" which says "startup repair cannot repair this computer automatically. Sending more information can help Ms create solutions" Two options "send info or dont." Under the see problem details drop down it gives:

"problem event name: startup repair V2"
"auto fallover" and mentions "corrupt file" twice.

I click "dont send info" and it goes back to the startup repair. When i click the finish button, the computer turns off.

When I restart/reboot:

If I press F10, I get to "PhoenixBIOS Setup Utility" in which I ran "Hard disk self test" under the Diagnostics tab. It said everything on the hard disk was fine.

If I press F8 I get to "Advanced Boot Options"

Whether I select "repair your computer" "safe mode" "last known g... Read more

A:Laptop w Vista only boots into "Startup Repair" infinitely

Ok I got to a login window and picked user "owner" and entered the password.

It took my to the "System Recovery Options" window. I tried to restore it to a previous point, but "no restore points have been created..."

Read other 3 answers
RELEVANCY SCORE 66.4

When computer boots up, it automatically goes to the Startup Repair tool, which searches for a problem but then concludes that it "cannot be automatically repaired".

I've tried booting in Safe Mode, same problem. I've also attempted to recover the "Last Known Good Configuration" but that hasn't given me any success either.

After the Startup repair tool fails to repair the problem I can view the details of the problem--it provides me with the following list.

Problem Signature:
Problem Event Name: Startup Repair V2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6000.16386.6.0.6000.16386
Problem Signature 03: 6
Problem Signature 04: 917518
Problem Signature 05: BadPatch
Problem Signature 06: BadPatch
Problem Signature 07: 0
Problem Signature 08: 3
Problem Signature 09: WrpRepair
Problem Signature 10: 10
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033

I have attempted the following tasks (which didn't solve the problem):

1.System Restore - Result: Cannot find a previous restore point

2.Windows Memory Diagnostic Tool - Result: No problems found,
system reboots, and automatically goes to "Startup Repair" - Gives
the same dialog of problem details listed above.

3.Command Prompt - Result: tried bootrec /fixboot & bootrec
/fixmbr, but after restart it automatically goes to "Startup
Repair" - Gives the same dialog of problem details listed above.

4.Chkdsk - Result: No bad files or errors found. After reboot ... Read more

A:Please Help - Vista boots directly to Startup Repair Tool

It sounds like you have about exausted your options. If you have an actual Vista install disk, you could try:

Repair Install For Vista

Read other 1 answers
RELEVANCY SCORE 66

I apologize, I'm relatively new at support forums but I am concerned on the status of my Laptop.

Anyways, here's the deal. Last night I put my computer into hibernate (which I do every night, so this is a brand new occurrence) and this morning I turned it on, according to the start up screen, Windows failed to shut down properly and it asked me if I wanted to continue start up normally. I accepted. Then, it started up in System Repair mode (which was visually, safe mode) and apparently, fixed something. Everything runs fine afterwards but it's irritating me that something might be wrong with my Computer.

I checked my Hard drive manager, it said everything was "Healthy", I did a "SFC/Scannow" and that repaired some things, but not everything (according the CBS.log). I did a virus scan and then restarted (I can restart without an issue), but after that I tired to hibernate and the same issue persisted.

So it's related to Hibernating only.

I went to my Event Viewer to see if it would shed any light and in the critical section, these came up. http://i47.tinypic.com/4v1gd3.png They're at the same times this happened so could it be a power issue?

I have a warranty so I can get anything repaired but I personally don't want to wait if I can just fix the issue myself, so any help is greatly appreciated!

Thank you in advance.

A:System fails to shut down after Hibernate and boots w/Startup Repair

Sorry for the bump, but I'm really urgent on this. I hate having to shut down every time I stop using my computer.

Another tid-bit, this also happens when I go into sleep mode. Do you think System Restore would fix this? If I restored back in time, would any viruses I had previously be restored as well?

Thanks again and I apologize.

Read other 9 answers
RELEVANCY SCORE 65.2

We have a Windows 7 computer, fairly new Acer Inspire laptop. Recently, when it had turned itself off for power reasons, when we entered the login it first said 'not found' and then dropped to a screen that looks like the login background but without the login box. Ctrl+Alt+Delete doesn't work, you have to force hard boot. On rebooting, it recognizes that startup failed and offers an attempt to repair. I ran this about 40 times, I think it's clear that isn't fixing it. It boots to that plain screen, so it starts windows, but then just sits there.

I'm told the Windows 7 disk has a more detailed startup repair option that might allow us to solve this without losing a lot of critical data on the hard drive. However we cannot find the dang thing, we had a whole stack of info/disks/etc. I thought was in the box it came in, but when we got it down from the closet, box was empty, and we can't find any trace of any of the original materials. I don't know what to do. Is there some way just to get that repair-startup utility without having to purchase a whole new windows 7 disk? We are afraid to send it for warranty repair to Acer because the default 'repair' appears to be reverting back to default settings which would wipe out all our data.

Do you have any suggestions?

Many thanks,
PJ

A:Win7 boots to blank screen (no login box), startup repair not working

Can you boot in safe mode?

Safe Mode

Read other 9 answers
RELEVANCY SCORE 62

I have a Dell Inspiron N7110 running Windows 7. 
A week ago the computer began to lock up when on the internet. The pointer could be moved but nothing would happen. Or sometimes a window or text box would open and then freeze. Then only solution was to force it to shut off and restart. 
 
It finally started to do this within a couple of minutes after Startup on any program. It worked fine in Safe Mode.
 
I ran AVG, Malwarebytes, and SuperAntiSpyware and they found nothing. 
 
A few months ago, the computer hung up in Startup. I was able to run chkdsk and it found 2 corrupt files and repaired them. At least one was related to Bluetooth.
 
When I ran chkdsk this time, it found nothing wrong. However' when I looked in Event Viewer, I saw where Bluetooth Media Service generated an Error Message: "The description for Event ID 0 from source Bluetooth Media Service cannot be found. Either the component that raises this event is not installed on your computer or the installation is corrupted." This was also the case for a few other files like gupdate, Adobe ARM service, and Bluetooth Device Monitor.
 
Because of this, I went into msconfig and stopped this and other programs from starting at Startup. This enables me to get on the internet and use the computer for 10-15 minutes before it locks up again. 
 
I tried to install ZoneAlarm per the instructions for posting to this forum but it locks up before it can complete it. I also tried ... Read more

A:Computer keeps locking up almost immediately after startup

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/559485 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 46 answers
RELEVANCY SCORE 62

Starting last night, whenever I start up my computer, it takes substantially longer to load than normal, but that's not my issue. Immediately after all of my start-up programs finish loading, my computer shuts down. I have tried restoring, resetting, and repairing Windows, but it says something about not being able to find a certain file to repair? I'm somewhat new to this stuff so please help if you can. Thanks.

Read other answers
RELEVANCY SCORE 60.4

Hi guys, 
I have a fairly new (2 years old) Samsung touch screen computer.
Windows was pre-installed (7 i think) so i have NO WINDOWS DISKS.
Windows automatically upgraded me to win 10 and since then i'm having no end of trouble. Computer freezing taking 5 mins to open a photo.
I tried a "reset" keeping files and settings. This blue screened said "was unable to reset PC" and took me back to the main login. I was able to re log into the computer and still sort of use some things.
So i decided to try a "restore to factory reset and reinstall windows" --> It got to 52% and froze. Then booted into the blue troubleshoot screen. Startup repair is no help. I can now no longer get into the computer.

I don't know what to do next??  Please help.

Read other answers
RELEVANCY SCORE 60

Windows failed to start, startup repair cannot repair this computer, safe mode cannot load, chkdsk freezes, sfc scan cannot perform the requested operation

Hi, I cannot start my Windows 7 at all. With power on, the system tries to load up but: ' windows failed to start.A recent hardware or software change might be the cause'. Trying to open safe mode or last good configuration doesn't work, it goes automatically to startup repair but after about an hour trying it says ' Windows 7 Startup Repair Cannot Repair This Computer ' (tried a few times). After another reboot with a windows 7 repair disk in the drive I managed to open the recovery manager from the DVD instead of the HDD and tried all the options - system recovery does not work, i have no previous images of the system, I ran a scan on the memory - it was all clear but still windows not starting. Then I did CHKDSK and it froze at 11% on stage 4 of 5, that happened a couple of times so I decided to run an sfc scannow but another error: 'Windows Resource Protection could not perform the requested operation'. So I'm totally stuck and don't know where to go next, I've got no windows installation disk, only repair disk. Any ideas would be much appreciated!

A:Windows failed to start, startup repair cannot repair this computer, safe mode cannot

Hi and welcome to TSF what is the make and model of the computer,is just a repair disc or is it a recovery disc does your machine have a recovery partition,have you tried removing and reseating the ram or running any diagnostic test like memtest 86 + or seatools for dos

Read other 3 answers
RELEVANCY SCORE 60

We have a VGC-LS25E Series Sony Vaio desktop computer. When we attempt to start, start up fails and when we run start up repair, the error message says start up repair cannot repair this computer automatically. When we view problem details we recieve a message saying problem event name: StartupRepairV2 followed by 10 problem signatures.
Problem signature 01: AutoFailover
Problem signature 02: 6.0.6000.16386.6.0.6001.18000
Problem signature 03: 6
Problem signature 04: 1310740
Problem signature 05: NoRootCause
Problem signature 06: NoRootCause
Problem signature 07: 0
Problem signature 08: 1
Problem signature 09: SystemRestore
Problem signature 10: 0
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1003

Please help? What should we do next?

A:Vista startup repair cannot repair this computer-- problem event name StartupRepairV2

Please stop posting the same thing over and over. Once is enough. Be patient. Someone will reply in Vista startup repair cannot repair this computer-- problem event name StartupRepairV2.

I'm requesting this thread also be deleted.

Anyone responding, please use the above thread instead of this one.

Thanks!

Read other 1 answers
RELEVANCY SCORE 60

Hi,

I have a problem with my HP Pavilion MS228UK. When I power it on, it runs Startup Repair and then gives me the mesage 'Startup Repair cannot repair this computer automatically'. In the details all the tests were completed successfully with error codes '0x0' except the last one which gave 'error code 0x490' with the message 'No OS files found on disc'. I ran the memory diagnostic tool which found no faults. I have tried to boot system recovery using F11 but that is not working either.

All help appreciated
Thanks
 

A:Startup Repair cannot repair this computer automatically(No OS files found on disc)

Does the BIOS detect the hard drive? Is there a hard drive diagnostic that can be run (there usually is when a memory diagnostic is also included)?
 

Read other 2 answers
RELEVANCY SCORE 60

We have a VGC-LS25E Series Sony Vaio desktop computer. When we attempt to start, start up fails and when we run start up repair, the error message says start up repair cannot repair this computer automatically. When we view problem details we recieve a message saying problem event name: StartupRepairV2 followed by 10 problem signatures.
Problem signature 01: AutoFailover
Problem signature 02: 6.0.6000.16386.6.0.6001.18000
Problem signature 03: 6
Problem signature 04: 1310740
Problem signature 05: NoRootCause
Problem signature 06: NoRootCause
Problem signature 07: 0
Problem signature 08: 1
Problem signature 09: SystemRestore
Problem signature 10: 0
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1003

Please help? What should we do next?

A:Vista startup repair cannot repair this computer-- problem event name StartupRepairV2

Hi jessie,
Did you get any factory recovery disc's when you purchased the PC, Or do you have any repair disc's from microsoft, If you do, try them, Try going into safe mode and doing a system restore,let me know how you do, good luck patch41

Read other 2 answers
RELEVANCY SCORE 60

Hi All,

Looking for some advice. I had a sudden BSOD earlier and upon restarting my PC it came up with Startup Repair, only to have it fail to repair the issue. I have been following this thread which seems to have stemmed from the same issue. I too am running Avast, so I suspect that may be the problem.

I have been following the steps in that thread and have reached the point of removing Avast keys in Regedit. I previously ran checks and also attempted to repair from the Win7 OS CD as was suggested in that thread.

I think that following the steps to remove Avast files may be the solution to my issue - however, as I am aware that Regedit can be dangerous to mess around with I wanted to check in and make sure I am following the steps correctly.

System info: Self-built PC, running Windows 7 on a Crucial M4 SSD, with two WD Caviar Black HDDs as storage drives.
CPU: Intel i5-2500k (not OCd)
GPU: EVGA nVidia 970 FTW
RAM: 4x4GB

It appears to have re-mapped my drives, my SSD is C: normally while my HDDs are E: and F:, but the system is currently reading C: as the Windows reserved partition of the SSD, the rest of that drive as F:, and the HDDs as D: and E: instead. This is in line with the user (Lethorio) in the earlier thread, however.

So, where I'm at now. I am around posts #65-70 in that same thread and have found avast keys. Here are the keys in the first folder which appeared in the search results:

(Default) REG_SZ (value not set)
Capabil... Read more

A:Avast Issue - Startup Repair Cannot Repair This Computer Automatically

Use the Avast uninstall tool. It's not necessary to make a Registry change.
https://www.avast.com/uninstall-utility

Read other 14 answers
RELEVANCY SCORE 60

Hi I need some help to fix my Sons computer It's 3 years old:
Acer Aspire - M5640 Standard
Intel Core™ 2 Quad  CPU - Q8200 @ 2.33GHz
Ram 3.00 GB
Sys Type 32-bit Op Sys

--> Running Windows  Vista Home Premium > co PA 201. 101

I have started it in "Safe Mode" (and it is in that state now) and ran "Kaspersky Quick scan" NO threats were found?

Before starting in "Safe Mode" I started it (5) times with the "Windows has encountered.... ETC" Blue start-up page with White Writing" and then ran the Start up Repair Page' and this is the result. See Attachment(01)... your site won't let me add the 2 attachment? Error You are not permitted to upload this kind of File??
So I have to Paste it!

Windows cannot repair this computer automatically
Problem Signature
Problem event Name StartUp RepairV2
Program Signature 01 Auto Fallover
02 6.06000.16386.6.0.6001.18000
03====/ 6
04 ====/ 327685
05 ====/ Bad Driver
06 ====/ Bad driver
07 ======/ 0
08 =======/ 1
09 ----- system restore
10 ========== / 6.0.60000.2.0.02561
Diagnosis and Repair Details
Every Test Performed in the Start Up Repair Log was Completed successfully = Error code = 0x0
Root Cause Found
A recent Driver installation or upgrade may be preventing the system from starting
----------------------------------------------------------------------

And when it had had enough of that" this was the Log of all that the i... Read more

A:computer only starts in Safe Mode Cannot repair in Startup Repair

1) Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

2) You said you ran a Kaspersky "quick scan". Please run FULL system scans with BOTH Kaspersky and with MalwareBytes

Read other 12 answers
RELEVANCY SCORE 60

I just finished reading this thread http://www.techsupportforum.com/forums/f217/cannot-boot-windows-startup-repair-cannot-repair-this-computer-automatically-663898.html as I'm having the same issue. Here's a brief history.

My computer was built by me and has been fine up until a few days ago after I removed some USB cables for devices that I then hooked up to another PC I have and reconfigured some USB devices as a powered hub I was using would not let them be recognized by Windows. When I opened the Attached Devices window to see if my devices were now recognized it took forever to open with the blue bar at the top never getting to the end. I Googled the problem and found that Bluetooth was may be causing the issues and to disable it. That didn't fix the issue so I tried other recommended fixes such as disabling printspool -- none worked.
I then started having the Cannot Boot problems so I let Windows try and fix it which it could not. I tried to let it restore from a previous good point but that failed and I would click Send Report and then it would shut down. This kept happening for several days until I came across the aforementioned thread here on the forum.
Last night I turned off the power and went to bed. This morning I switched on the PC and let it boot up. Lo and behold WIN7 started right up no problems -- the Attached devices window opened right up as well. Then I saw that it was loading drivers for 3 attached devices -- all USB devices and one r... Read more

A:Cannot boot windows - Startup repair cannot repair this computer automatically

Update
I unplugged two USB cables leaving just the keyboard and mouse an rebooted. Windows starts just fine but then starts to install drivers for three USB devices. Not sure what they are as all I have plugged in are the keyboard and mouse. Any way of finding out what devices Windows installed drivers for?
Thanks

Read other 1 answers
RELEVANCY SCORE 60

on the 20th i turned my PC on i had been playing left 4 dead 2

and minecraft, the latter of which needing an update, and i

think dungeon defenders and frozen synapse had updated

themselves through steam, i then turned it off. when i came

back to it a few hours later it finished loaded windows but

before it came up with the accout login screen it blue

screened. the computer then automatically re-started and

launched startup repair, which failed. i then tried rebooting

pressing F8 did the startup repair manually, this time writing

down the details:
Problem Event name: startup repair V2
Problem signature 1: Manual repair
Problem signature 2: 6.0.6001.18000.6.1.7600.16385
Problem signature 3: 0
Problem signature 4: 65537
Problem signature 5: unknown
Problem signature 6: OS version mismatch
Problem signature 7: 0
Problem signature 8: 0
Problem signature 9: unkown
Problem signature 10: 1168
OS version: 6.0.6001.2.1.0.256.1
Locale ID: 1033

after trying this a few times and getting now joy i tried to

boot from last known good configuration, which led to the same

result- the blue screen at the same point. i have been able to

get in via safe mode and tried a system restore to the 17th,

which while it did complete the system restore, did nothing to

help the problem. i then tried not telling the system to

automatically reboot on crashing and wrote down what was on

the blue screen:

Bad_System_config_info

Technical info:
*** STOP: 0x00000074
(0x000000000... Read more

A:computer won't start, startup repair can't repair os version mismatch,

Hi and welcome to TSF this is about your error code
Bug Check 0x74: BAD_SYSTEM_CONFIG_INFO
The BAD_SYSTEM_CONFIG_INFO bug check has a value of 0x00000074. This bug check indicates that there is an error in the registry.

Parameters
The following parameters appear on the blue screen.

Parameter Description
1 Reserved
2 Reserved
3 Reserved
4 The NT status code (if it is available)


Cause
The BAD_SYSTEM_CONFIG_INFO bug check occurs if the SYSTEM hive is corrupt. However, this corruption is unlikely, because the boot loader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when it loads the hive.

This bug check can also occur if some critical registry keys and values are missing. Thee keys and values might be missing if a user manually edited the registry.

Resolving the Problem
Try restarting the computer by selecting "last known good configuration" in the boot options.

If the restart does not fix the problem, the registry damage is too extensive. You must reinstall the OS or use the Emergency Repair Disk (ERD) that you previously created by using the Windows Backup tool.

Read other 5 answers
RELEVANCY SCORE 60

Hi, everyone.

Today, after restarting my computer, I was faced with the Startup Repair tool, unable to boot Windows 7.
A couple hours later, after running startup tool a total of 29 times I have been unable to solve the problem.

I have also:

Tried booting in safe mode[didn't work]
Tried last known good config[didn't work]

Based on some advice I read elsewhere, I also ran chkdsk /r/f c: . It completed successfully.

Even just knowing how I can extract my files so that I can re-install windows would be a big help.
Startup tool doesn't take over a minute to complete, and displays these details:

Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200110
Problem Signature 05: AutoFailover
Problem Signature 06: 29
Problem Signature 07 CorruptFile
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Startup Repair Diagnosis and Repair Log displays the following details:
Last successful boot time: 8/25/2012 11:35:21 PM(GMT)
Number of repair attempts: 29

Session details

System Disk = \Device\Harddisk1
Windows directory = C\Windows
AutoChk Run = 0
Number of root causes = 1

Test Performed:
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 15ms

Test Performed:
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 16ms

Test Performed:
Name: Disk failure diagnosis
Result: Completed successfully.... Read more

A:Cannot boot windows - Startup repair cannot repair this computer automatically

Hi-

Can you boot into safe-mode?

Also, do you have either a recovery partition, recovery disk, or the windows installation disk? (some of the tools could help, especially if safe mode doesn't work)

Regards,

Mark

Read other 19 answers
RELEVANCY SCORE 60

HELP !!!
I have an Acer desktop running Windows 7 SP1. When I try to start it up I get the Windows Error Recovery screen ? Windows failed to start.

I launched the recovery option it runs for about 20 mins with the message Startup Repair cannot repair the computer automatically.

Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 382
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: 0x7f
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Startup Repair Diagnosis and Repair Log displays the following details:
Last successful boot time: 7/29/2016 09:50:09 PM(GMT)
Number of repair attempts: 1

Session details

System Disk = \Device\Harddisk0
Windows directory = C\Windows
AutoChk Run = 0
Number of root causes = 1

Test Performed:
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0ms

Test Performed:
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0ms

Test Performed:
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms

Test Performed:
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 63 ms

Test Performed:
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken 484 ms

Test Performed:
Name: Boot manage... Read more

A:Startup repair cannot repair this computer automatically - wont bootup....jxl

Hi, have you tried running it from your install disc Repair Startup in Windows 7 from the Windows DVD

Read other 19 answers
RELEVANCY SCORE 60

I have a Dell Studio 1555, win 7 Home Premium. I am trying to restore the system to Factory default. After pressing F8 at startup, when I select 'Repair your computer', it boots into regular Windows.

I think it has something to do with the Partition identifiers? Please help.

Thanks.

A:'Repair your computer' option boots into Windows regular mode

rkay,
Welcome to SevenForums. What are you trying to do exactly. Have you changed something in your bios and you want to return to factory default or has an issue developed and you want to restore back to before it began in hopes of correcting as they are two very separate issues?

Read other 9 answers
RELEVANCY SCORE 59.2

Hi all.

Tried to boot up my computer this morning and was given the message: 'Startup Repair cannot repair this computer automatically.'

Problem signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200400
Problem Signature 05: AutoFailover
Problem Signature 06: 13
Problem Signature 07: CorruptFile
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

I'm running Windows 7 Professional, installed onto a Crucial M4 SSD.
It won't let me boot in safe mode, and gives the same message.
I have no system restore points.
chkdsk /r doesn't work in command prompt and comes up with: 'The type of the file system is NTFS. Cannot lock current drive. Windows cannot run disk checking on this volume because it is write protected.

Would anyone be able to help me resolve this? Thanks a lot.

A:[SOLVED] Startup Repair cannot repair this computer automatically.

Hello,


Quote:





Originally Posted by Lethorio


...chkdsk /r doesn't work in command prompt and comes up with: 'The type of the file system is NTFS. Cannot lock current drive. Windows cannot run disk checking on this volume because it is write protected...




Try chkdsk c: /r /x (/x forces dismount of the drive).

If the chkdsk scan runs but does not fix the issue, then please go back to the Command Prompt and enter sfc /scannow. Reboot once finished to see if it has fixed your issue.

Read other 19 answers
RELEVANCY SCORE 59.2

Hi everybody
I recently cloned an SSD with Windows 7 Pro on from an HP EliteBook to an SSD from the same brand and the same size.

Edit; The cloned SSD is being used in a HP ProBook

When booting the cloned SSD, I'm getting a BSOD. I used the repair disk to perform a startup repair. When done I got the following message;
problem details:
Problem signature
Problem Event name : StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
Problem signature 04 : 21199729
Problem signature 05 : External media
Problem signature 06 : 6
Problem signature 07 : BadDriver
OS Version : 6.1.7600.200.256.1
Locale ID : 1033
Other things I've done and did not show any results;

sfc /scannowchkdsk
Is there anything else I can do, since I really want to avoid a fresh install (A lot of personal configurations on the employees' device)
Thanks in advance

Read other answers
RELEVANCY SCORE 59.2

Fooling around on my laptop ( Acer Aspire 5920 ) last night, set it down for a few minutes while I went to the kitchen and came back to it frozen.

Had to force it to reboot by holding the power button, and when it rebooted it took me to the 'Startup Repair' screen, and then tells me after a few minutes of looking busy that 'Windows Cannot Repair this computer automatically.' I've made 17 repair attempts so far. Apparently my last successful boot time was in 2008.. which is a lie, aha.

I would very much like to save a few files from the computer if it's going to need a complete format, there's a good couple of years worth of writing and artwork that I'd be heartbroken to lose.

Any help is greatly, greatly appreciated.

A:Startup Repair - Windows cannot repair this computer automatically.

I've also run Windows Memory Diagnostics Tool under someone's recommendation but it doesn't seem to have detected any problems.

I've purchased a recovery .iso from neosmart, but it refuses to boot from USB saying 'Disk Error, press any key to restart', and it ignores me trying to tell it to boot from CD. I don't have any recovery software that's been provided with my laptop, it's just disappeared into the ether if I ever had any.

Read other 33 answers
RELEVANCY SCORE 59.2

  Hi, just recently I installed Kaspersky total security 2016 anti-virus software, the following day I was unable to bootup.
I could only get has far has ' startup repair , after a short scan I received the error message, ' startup repair cannot repair this computer automatically '
And gave me two options, - send information about this problem ( recommended )  & don't send, but I was unable to select ( mouse did not function )
So I realised that I needed to erase my ' c ' drive and reinstall windows7 , fortunately I have backup.
But the problem is, I don't know how to access 'c ' drive to erase and reinstall win7

So ( not being very technical ) I contacted Kaspersky technical support, for assistance.
They emailed me the download for their rescue disc, and instructions of how to run the disc, so I copied it to disc and usb stick.
Using the rescue disk, I am able to copy my backup files on 'c '  
But I cannot see an option with the rescue disc for wiping the ' c ' drive clean and reinstalling win7?
Have since asked Kaspersky support, replied but not answered.
Can anyone assist please

Read other answers
RELEVANCY SCORE 59.2

I am in major crisis mode because my laptop is stuck in startup mode and can't repair itself. I've tried a few command tricks but most of them require safe mode, which I can't access at all. Also, many threads have mentioned reinstalling windows 7, which would be fine if my disk drive hadn't burnt out recently. I am terrified of losing all my files so I don't want to toy around with anything. Thoughts?

A:Startup Repair on laptop cannot repair computer automatically.

Welcome DelaneyNicole.

Sounds like a shame that you do not have a backup of your files.

Some things you could try:
> Try accessing windows repair from boot (press F8 and select the recovery option),
> Borrow a disc drive from another system (maybe a friends?),
> Use a bootable USB drive with say some version of Linux on it to access your files.

Do you know what happens to cause this problem?

Regards
Stephen

Read other 1 answers
RELEVANCY SCORE 59.2

I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:\CI.dll is corrupt".

I am so worried I won't be able to fix this and will lose everything! Any help is so greatly appreciated!!

Danielle

A:Startup Repair - windows cannot repair this computer automatically

Reinstall Windows. It's faster and easier. I never do a system repair. Usually installing windows , drivers and most of the useful programs takes about 2 hours and finally You have a new system. Virus scan and system repair takes much longer, and it's not so successful .

Read other 8 answers
RELEVANCY SCORE 59.2

Hi,

Please help!! I tried starting up my computer and I got this problem!

Problem Event Name: StartupRepairV2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6001.18000.6.0.6001.18000
Problem Signature 03: 6
Problem Signature 04: 327685
Problem Signature 05: CorruptFile
Problem Signature 06: CorruptFile
Problem Signature 07: 3221225705
Problem Signature 08: 3
Problem Signature 09: WrpRepair
Problem Signature 10: 1117
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033

Any information would be greatly appreciated.

A:Vista Startup Repair Cannot Repair this Computer Automatically

Assuming that you do not have a Vista DVD

On another computer burn a recovery DVD

Create a Recovery Disc

If you do have a Vista DVD, post.

Read other 1 answers
RELEVANCY SCORE 59.2

Hello. I am having a continuous issue with my computer. I apologize in advance for being an amateur at computer repair so please bear with me if I need to better understand some terminology.

My computer is continuously crashing. It reboots itself or turns itself off. I don't always see the BSOD when it shows up but I imagine it flickers every time it crashes. One time, I saw it, and it said "BAD POOL CALLER."

Every time it crashes I do the recommended startup repair just to get it to work again. It always tells me that Startup Repair cannot fix this computer and then it reboots and everything works again for awhile. I thought everything was fine and dandy a couple weeks ago and now it is starting all over again. Please help! Thank you

A:BSOD and Startup Repair Unable to Repair This Computer

Backup your data, reinstall windows

Clean Install Windows 7

Read other 2 answers
RELEVANCY SCORE 59.2

hello all,

i have a Dell Inspiron 1525 notebook PC and during Windows startup, it goes into "Startup Repair" with the error "Windows cannot repair this computer automatically". following is the problem details:

Problem signature
-------------------
Problem Event Name: StartupRepairV2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6000.16386.6.0.6001.18000
Problem Signature 03: 6
Problem Signature 04: 2621480
Problem Signature 05: CorruptFile
Problem Signature 06: CorruptFile
Problem Signature 07: 3221225487
Problem Signature 08: 3
Problem Signature 09: WrpRepair
Problem Signature 10: 10
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033

i have tried F8 to invoke Safe Mode boot options and tried all 3 safe modes. but still returned to the "Startup Repair". i also tried the option "Last Known Good Configuration (advanced)" several times but no use.

i have created a Knoppix v6.2.1 bootable DVD and started up through the CD-ROM drive to access my harddisk. it appears my file structure is ok and i copied/backup/retrieved as much files and file directories to an external USB drive (through Knoppix operating system). i can see that my User Profile is still there so i do not want to re-install the entire Windows Vista o/s again.

from System Recovery Options, i can enter Command Prompt and tried these actions:
bootrec /RebuildBCD
bootrec /FixMbr
bootrec /FixBoot
however the "To... Read more

A:(2010) Startup Repair cannot repair this computer automatically

Im not there, so I can only guess. I do not think that you did a boot from the DVD, but rather the OS

Boot Priority - Change
same for 7

Read other 11 answers
RELEVANCY SCORE 59.2

I started my PC yesterday, and it goes straight to startup repair which fails to fix it every time.
It starts up normally with the HP logo but then it says "Windows is loading files" and goes to startup repair.
I don't have the windows 7 CD and I dont have a restore point to go back to... I tried booting windows 7 from a usb stick but it just went to the startup repair again tho (maybe i didnt do it right, used rufus on a windows 7 iso then simply plugged it in on my pc)
Couldn't get to advanced boot options even while mashing the F8 key nonstop since I turned the computer on. The only thing that seems somehow useful is the command prompt, that for some reason using X:\windows\system32> instead of the usual C.
I'm really lost at that point and any help would be great

Read other answers
RELEVANCY SCORE 59.2

Hello, it's nice to meet you all. I'm posting because I have been unable to boot my ASUS U52F laptop, which runs Windows 7 Home Premium (x64) and Internet Explorer 11. The PROBLEM:I have been unable to boot my laptop since December 9th or so. When I power on, I sometimes I get an initial boot screen that says "Starting Windows" and then a blue screen that says Windows must be shut down.  Other times I boot up and my computer goes to "Windows Error Recovery" where I can either 1. "Launch Startup Repair" or "Start Windows Normally".  Choosing #1 leads to a failedn startup attempt and causes the computer to shut off. Option #2 takes me to the Startup Repair dialogue box.Then it attempts to repair and produces the error code "Windows cannot repair this computer automatically"I have tried logging on as a local user providing an administrator password, with the same failed result. Most RECENT CHANGES:On December 6th, I asked my niece to help me import my contact list from my phone into an excel spreadsheet on my computer. After hours of searching for how to do it through iTunes and gmail and failing, I came across a free software called Copy Trans. I downloaded the software... I think from this website but I can't be sure: http://www.copytrans.net/download.php The software never seemed to successfully sync with my phone. Then my niece used my computer for her school work. She either uploaded or reinitialized something called Vuze software to downl... Read more

A:Startup Repair: Windows cannot repair this computer automatically

Greetings Bob and to BleepingComputer's Virus/Trojan/Spyware/Malware Removal forum.My name is Oh My! and I am here to help you! Now that we are "friends" please call me Gary.===================================================Ground Rules:First, I would like to inform you that most of us here at Bleeping Computer offer our expert assistance out of the goodness of our hearts. Please try to match our commitment to you with your patience toward us. If this was easy we would never have met. Please do not run any tools or take any steps other than those I will provide for you while we work on your computer together. I need to be certain about the state of your computer in order to provide appropriate and effective steps for you to take. Most often "well intentioned" (and usually panic driven!) independent efforts can make things much worse for both of us. If at any point you would prefer to take your own steps please let me know, I will not be offended. I would be happy to focus on the many others who are waiting in line for assistance.Please perform all steps in the order they are listed in each set of instructions. Some steps may be a bit complicated. If things are not clear, be sure to stop and let me know. We need to work on this together with confidence.Please copy and paste all logs into your post unless directed otherwise. Please do not re-run any programs I suggest. If you encounter problems simply stop and tell me.When you post your reply, use the button instead.In the ... Read more

Read other 26 answers
RELEVANCY SCORE 59.2

AS the title says, my PC went into hibernation a few days ago and wouldn't wake up. So i had to do a plug switch turn off.

Now when it boots up , it goes into startup repair but i get the message
''Startup repair - windows cannot repair this computer automatically''

then i have to send or don't send an error report
then i get 6 options , i cant remember them off top of my head.

I have Windows 7 Professional
but i've long lost the disc, apparently system restore doesn't work either it always fails for some reason.
p.s i ran checkdisk and that didn't find anything wrong, although there clearly is.
( upon boot up now if i press F8 i get the option of 3 startups, now i'm only guessing but 1 and 2 are a jumble of numbers and letters and 3 is normal startup i think . only option 2 works and i boot normally. if i don't press F8 though i get all that malarky above )

What else could it be ?
How do i fix this ?
 

A:Startup repair - windows cannot repair this computer automatically

Read other 7 answers
RELEVANCY SCORE 58.4

When I shut down the Vostro 230 it re-boots by itself a few seconds later. I have to unplug the power lead to stop it re-starting. Any suggestions.

Read other answers
RELEVANCY SCORE 58

On start up a black and white gateway screen flashes followed by a startup Repair window. This gives me a pop up that says Startup Repair cannot repair this computer automatically. There is the option of sending the information to microsoft or viewing problem details. When looking at the details, Problem Signature: Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 21200290 Problem Signature 05: AutoFailover Problem Signature 06: 11 Problem Signature 07: CorruptFile OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automatically with the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command prompt chkdsk/f/r None of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you h... Read more

A:Startup repair cannot repair this computer automatically

HI, I see that the post was edited. Are there any suggestions on what to do next? Any help would be greatly appreciated. Thanks

Read other 7 answers