Over 1 million tech questions and answers.

Windows XP wont boot, Also wont boot in Safe Mode

Q: Windows XP wont boot, Also wont boot in Safe Mode

This happen after when i ignored a AVG update as im working in middle of spreadsheet which need to be done in this week and when i tried to copy and paste and the laptop were freeze and wont let me able do anything so i press "off" button to shut thing quick rather as i set my off button to hibernation mode.

When i turn on, The acer logo show then blank page. Tried pressig F8 to go Last Known Good Config and still the blank page. Also with Safe Mode. Blank page!!!

I perfer if you can change your method if i need to insert CD as it's netbook and it dont have CD drive and also i have blank USB ready to add for booting.

Thanks for any help in advance

Preferred Solution: Windows XP wont boot, Also wont boot in Safe Mode

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows XP wont boot, Also wont boot in Safe Mode

Read other 14 answers

The other day I updated my laptop which is a Dell Inspiron 17R running Windows 7 home premium, when I updated the computer booted ok took longer than usual, I restarted the laptop but this time it wouldn't boot up, it came up with a black screen saying repair windows(recommended) or start windows normally, I clicked repair windows it said searching for problems, attempting repairs this took about an hour and a half but unfortunately did not resolve the issue I sent the error report to windows, I restarted the laptop again,  attempted booting it in safe mode no luck and the same other various options I can try but no luck they all just crashed the laptop and began restarting it,  tried repairing it again and this time it took my to a screen with various options like load backup open cmd and format my hard drive, loading the backup did nothing and  wasn't sure what to do with cmd so decided to part ways with my stuff and format the hard drive, I did this and the laptop was formatted but the OS was still on the hard drive and it was like the first time I opened it all of my personal things were gone but win 7 home premium was still there, I set it back up again installed AVG anti virus etc downloaded a few movies ran fine the next day it said windows updates need installing so, I  did , 145 updates were made  turned my laptop back on and again it was booting up and crashing followed the steps I mentioned before noting was working after messing around wit... Read more

A:Computer wont boot, wont boot in safe mode, wont load repair centre

Hello there,
It seems like you did not perform a clean installation of Windows and that's why your system is acting up. 
Follow the steps below to install a new copy of Windows:
1. To format your hard disk during Windows 7 installation you will need to start or boot your computer using the Windows 7 installation disc or USB flash drive. Insert your Windows 7 disc in your CD/DVD drive. Please note: will need to restart or turn on your system with the disc in the drive. 
2. After turning on your system with the CD in the drive go ahead and press any key when prompted during your computer post routine and then follow the instructions presented on screen. If you don’t see this go back to step 1 to setup your BIOS to boot from CD or USB flash drive depending on your installation media.
3. On the Install Windows page simply enter your preferences and click next.
4. Accept the Windows license agreement.
5. On the “Which type of installation do you want” page go ahead and choose the “Custom” option.
6. Select Drive options (advanced) on the “Where do you want to install Windows” page.
7.  Select the partition that you want to change, choose the formatting option you want to perform and then follow the instructions.
When allocating space choosing the default MB size for your drive is typically the best for most users since you want to take full advantage of all your disk... Read more

Read other 6 answers

it keeps getting stuck mid boot, it wont work in start up repair or safe mode. 
before this happened I got two bluescreens earlier in the day. 
I have gotten blue screens before but nothing were I couldn't boot my computer. 
Thank you in advance
last known good config won't work either. 

Read other answers

Last night I updated windows 8.1 from windows 8.
It got to the stage where it needs to restart so it done that started the configarations and once it reached 100% it restarted.

Since then what happens is when i press power on the samsung logo comes on the screen then the black screen with the windows picture then the bsod comes up for around half a second and it restarts. then it constantly does this.

The whole cycle only takes a few seconds.

Ive tried booting in safe mode but this isnt working so I downloaded kav rescue on another computer and saved it on a flash drive, But it wont boot off this either.

Any ideas?

A:Windows wont start after 8.1 update wont boot in safe mode

What does the BSOD state? Most times it is a driver issue with the Display drivers. Other times it is hardware.

Read other 3 answers

Ok, it all started when i was dloading a program to make windows setups.(.msi). Then i decided i didnt like it and uninstalled it. After tht was done. I decided i was going to stick with Inno Setup. I have used it before and liked it. But then i noticed all or most of my desktop icons were missing. And all the start menu ientries were missing. So i figured i had a virus. SO i went to do a system resotre. But found that i oculdnt find it...due to to missing folders. So i decided i would then try to boot into safe mode. When i tried to boot it said it cannot find a file(same with normal mode). Ubfortunely i dont remember what it said. I think it said windows cannot find NRDL press ctrl alt delete to reboot. or somthing like that. Any ways i tried a few more times and it all failied. SO then i tried the windows recovery console. Nothing. I really didnt know whre to go with it. Then i decied to go into the bios and reset. Or i thought i was resseting them. I seleteced. "fails proof settings". But then i rebooted and things got worse. My monitor is now getting no signal, it says it is ocnnected though..... So i cant see what i am doing. Please any ideas. I have a Programming project that i have been working on for months now. i dont wanna lose that. And a Lang arts project. I am very computer savvy but i have tried everything. and yes i tried a differ monitor. No Dice.


Xp Home
Nvidia 6200 TC
amd 3000+
Standard Monitro.

Plese help i need my computer i cant go on... Read more

A:Windows wont boot, Monitor wont display picture. Cant access safe mode

Read other 14 answers

#1 Hi, basically this probem arose from nowhere. I came back from holiday 6 days ago and my pc took longer than i remember to boot. Only till i realised the next day and day after it was getting longer and some times not loading past the 'Windows' screen. Each time when it hasn't loaded fully, I turn it off and re-boot pressing F8 to get up safe mode, which doesn't work at all.
It gets stuck on '/avgdiseh' doesn't load past and will stay like that till turned off. Start up repair does absolutely nothing, it asks to do System restore which then errors and reboots, if i press cancel it stays on the 'Scanning' screen for hours.. (8 hours today)

#2 I've now seemed to run into another problem trying to boot from my CD drive. First time I loaded everything correctly got to 'install windows' screen clicked start up repair which did nothing. Ever since that windows won't detect my CD drive even though it opens and did read CD's.(watched a film on it the other day)

I've looked online and other people have had the same problems and clearly i haven't found a solution yet. I've tried cleaning the inside of my case, double checking connections, changing boot options. From what i've read its either a failed HDD, failed RAM (, or failed CD drive in the case of my second dilemma)

I'm just curious as to whether anyone can pin point what the problem is. If its an easy fix or whether it is possibl... Read more

A:Windows wont boot past Start up Screen, and won't boot safe mode

it's the one following avgdiseh that is the problem

d/load and run the h/drive makers diagnostic utility on the h/drive


Read other 1 answers

hi, window will not boot goes to blue screen that says process 1 initizaltion failed and starts dumping, then reboots to reapir, wont repair, tried booting to reapir disc and used bitdefender rescue which showed no virus, then tried booting to my winodws 7 upgrade disc, it says loading files then goes to a windows screen and nothing, tried recovery and it only shows one date may 6th, recovered to that date and does the same boots then goes to blue screen, in advanced i went to promt screen and tried chkdsk c:/f/r and it said failed to transfer logged messages to the event log with status 50, so now dont know what to do if i need a new hard drive or what bios looks the same as always please help mike

A:windows 7 wont boot, wont go to safe mode or start on windows 7 disk

Have you followed these steps - Troubleshooting Windows 7 Failure to Boot

Read other 5 answers


I really hope one of you fine people can help me out.

Last night I was browsing facebook and my computer froze up. I tried to reboot it and it wouldn't load pass the windows logo.

It will however let me get into Safe mode.

Here is what I have tried:

- Restore to earlier date: I do not have one created as I recently restored my computer to factory setting (about a week ago)
- Malware scan with Malwarebytes: nothing found
- Memory Check - looks good
- Chckdsk - all went well
- Startup repair - Gave me errors and couldn't fix the problem. here is what the log showed:

Any help would be super appreciated.. i am very frustrated with this right now :(


A:PC wont boot pass Windows logo. Will boot in safe mode. Error code given. Please help

Which CHKDSK did you perform? /F or /R?

Read other 6 answers


Today I noticed that I could not open my start menu with neither the windows button, ctrl + esc, or a click of the mouse. I've also had a problem the last couple of days saving/opening files in one of the programs I used to make music. I tried to go into safe mode to do system restore, but the safe mode didn't boot. It scrolled all the system files on the screen but then just stopped and nothing happened.

So, I tried the other option (forget what it's called) that lets you perform various other system restoration tasks. I brought up the system restore screen from there, but got an error that said something about corrupt files so it could not perform the restore. I checked again, and all my restore points had been deleted.

Lastly, when I click computer, all the drives are blank with no names beside them, only the icons. I can still click them and they seem to be functioning normally, so I don't know if there is a relation to this. I don't know if some registry files were deleted or if there is some other problem. I didn't notice the start menu/safe mode/blank icon issues until I just recently installed the latest windows update.

Sorry if this seemed a little long winded, but I would appreciate help from anyone.


A:Safe mode wont boot, Start menu wont appear and various other problems

Hi -

Try a repair/ install - http://www.vistax64.com/tutorials/88...all-vista.html

Regards. . .



Read other 2 answers

While working on my computer last night my computer unexpectedly froze, so i reboot it and i get to the windows logo screen with the bar that goes across midscreen, it will take a few minutes and sit there and then just restart and repeat. When i try to go into safe mode i get a bunch of lines that scroll up my screen similar to : multi(0)disk(0)rdisk(0)partition(1)\windows\system32\windows32\drivers\mup.sys - this is the last one on my screen before it waits a few minutes and just restarts. I have tried to boot windows normally and with the last settings, and normally, no luck.

I have also put my XP disc that came with my computer and it gets to where it is examining 476938mb disc 0 at id0 on bus 0 on nvatabus.... it never gets any further. Any help would be appreciated please and thanks

Read other answers

ive been through the repair process and nothing is happening. when the startup repair is done its saying windows installation 0. but when trying to use a recovery disc it shows that its there. dont understand

A:Windows 7 Wont boot up and Safe Mode.

Hi please see this How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows

Read other 1 answers

Hi All,

I have again been given a friends PC to fix...but again the repair is beyond me so i am here asking for help

The PC is custom built with XP installed on it.
The PC wont start or even go into Safe Mode, it just crashes and starts the entire routine again, this continues over and over.

I do get a screen before the boot starts which says the following:

We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

If you computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Food Configuration to revert to the most recent settings that worked.

If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you arent sure what caused the problem, choose Start Windows Normally.

Then the normal options are displayed, with Safe Mode and so on. None of the options work and the PC just keeps coming back to this screen.

I have spoken to the guy who the PC belongs to and he said there were no recent hardware changes but is not sure about software.

Is there anything that can be done to fix and get the PC working again?

Thanks in advance

A:Windows XP wont boot or go into Safe Mode

No suggestions from anyone??

Any would be welcome.......

Read other 1 answers

Hey guys..

I've been trying to fix this computer for the last 8 hours and I can't figure it out. I've narrowed it down to a system corruption, it's not hard, viruses or spyware, it's not anything but a corrupted windows installation.

I will only image the drive at a last resort. I might just buy a second hard drive and install the OS and copy over the goods. Either way, I don't want to go though all that work. I know I can fix this.

I had it working at one point, I did a Windows XP Setup into Repair mode, checked the disk and even went as far as created a second boot.ini - Just to eliminate a factor, that didn't work.

What appeared to work was to "repair" the "corrupted windows installation" 3 or 4 times, and then do an "upgrade" and reactivate windows. I managed to get to a desktop, but then things just went downhill.

The icons where weird, and my "theme" was reset, and various other things. I created a new user in hope to start over, I was aimed at uninstalling things such as the vista transformation pack, etc.. Did a Windows Update, changed a few Driver letters so shortcuts worked, and then tried to "repair" the transofmation pack so i could uninstall it. I also did a Windows Update.

Then I reboot, and my nightmare starts over again. Now I can't even get the damn upgrade/repair to work and it wont boot past mup.sys. If I just knew what file was corrupted or what was making the s... Read more

A:Windows wont boot - Safe mode is stuck on Mup.sys

Take it to a computer shop and ask them if they can save the data. You will have to pay but they will most probably be able to do it.

Read other 2 answers

Ok here's the deal.

I run windows XP home. I was on my computer (its a HP desktop) all day yesterday. I didnt do any hardware changes. I did have to go into safe mode and do a system restore from early in the week and after I did that, I restarted it a few times, it worked great and now...it wont do anything.

I turn on the pc and hit F8 to go into safe mode. I get the safemode option, I choose run in safe mode, and then my OS system and then the screen goes black and stays black. No blinking cursor, no blue screen of death...just black. It does the same thing when I just try to start it up normally. I get the Compaq start up screen and then it goes to black and nothing. No mouse, no sound when I hold a key down on the keyboard...nothing.

I have been reading in these forums for hours trying to find someone with the same problem and couldnt find one so I do hope that this post in not a repeat.

Please help.


A:Windows XP Home wont boot up in reg or safe mode

What was wrong with it before when you had to use System Restore?

Read other 4 answers

Hi i have tried everything, but cant get past the blue screen. No matter what option i choose from f8 it keeps taking me to blue screen then startup repair starts to run for ages "attempting repairs". Is there anyway that i can bypass startup repair and get to my files, maybe thru the partitions? I tried safe mode with command prompts and nothing. Cant even restore. Dont have windows installation or recovery discs...Any help please!.. heres my system specs:
hp pavilion dv6-2155dx
intel core i3 cpu m 330 @2.13ghz
bios version f.1c
windows 7

A:BSOD, windows wont boot not even on safe mode

You can use Ubuntu to try and access your files. Burn the ISO to a CD and when you boot to it choose "Try without making changes"

Download | Ubuntu

Read other 2 answers

MALWARE issues!!!I was having trouble staying in SAFEMODE to try to do some cleanup on my Laptop. The malware prevented my getting into safe mode and would cause the pc to just reboot normally. Because of this, I went into the msconfig>system config utility > boot.ini> then placed a check in the safemode box. I rebooted. Now its worse because it is now stuck with the BLACK screen safe mode choices. But It still wont go into safe mode and wont even reboot normally to reg windows mode.It trys to reboot on its own after a countdown of 30 seconds. But a blue screen quickly flashes once. Then it tries to reboot over and over again no matter which option I pick (last known config, safe mode networking, safe mode, safe with command, etc), it just tries to reboot over and over again like a broken record.I can get into phoenix BIOS by pushing F10 (or F12 I think), but I dont know what I can do there.At this point, i just want my pc to be able to boot normally into Window, and I will see what I can do in reg windows mode as far as cleaning the malware off my pc.Please help in easy terms.Thanks for your help in advance...PS: Windows Home edition OEM sp2 IE7-HP pavillion 8100 laptop-I have the original sealed discs that came with my 4 or so year old Laptop.I just need to be walked step by step if I need to boot from them. I dont want to have to wipe everything out or have to do a fresh install, if I can at all avoid this....Sorry for the hassle.My original main goal... Read more

A:HELP! My Laptop wont do safe mode or boot into reg Windows mode-

Hello and welcome. I am moving this from XP to the Am I Infected forum for scans.Lets do these from normal.Please download TFC by Old Timer and save it to your desktop. alternate download linkSave any unsaved work. TFC will close ALL open programs including your browser! Double-click on TFC.exe to run it. If you are using Vista, right-click on the file and choose Run As Administrator. Click the Start button to begin the cleaning process and let it run uninterrupted to completion. Important! If TFC prompts you to reboot, please do so immediately. If not prompted, manually reboot the machine anyway to ensure a complete clean.Next run MBAM (MalwareBytes):NOTE: Before saving MBAM please rename it to zztoy.exe....now save it to your desktop.Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and yo... Read more

Read other 9 answers

Ok, so I'm helping someone can help me on here. I was origionally running Windows 7 but had to install Ubuntu alongside it. I was installing a game, then started playing it while it continued downloading (it was a streaming download.) It ran fine for about 10 min, and then the computer froze. I decided to restart it and now it wont boot back up. Everytime I try booting it into either safe mode or regular mode it gets to the windows loading screen and then goes to the bsod and restarts. When I try booting it in safe mode it will load all the drivers until it reaches aswrvrt, then bsod flashes and it restarts. I tried booting it into recovery mode but it will reach a gray screen and then hang. I can move the courser around but nothing loads. I installed Ubuntu on a sd card so I can try and fix the problem. I can access all the data on the hard drive, so I tried uninstalling avast and the game. I dont think it worked since I can still see the files.Does anyone know what I am talking about and can help me?

A:Windows 7 wont boot into safe mode or recovery mode

Your Windows installation has corrupted in some way. If you cannot enter the "Last Known Good" option from the recovery screen you should then be looking at booting from a repair disk and repairing your file system.
EDIT: that is a windows repair disk specific to your OS that I am talking about.

Read other 3 answers

Hey There,

I'm working on an IBM ThinkCenter Desktop PC.

On bootup, it goes through the IBM logo and then the Windows logo flashes quickly and then is gone and then the Safe Mode screen appears. No matter which option I choose from the Safe Mode screen, the result is the same: The Windows logo flashes quickly and then the system reboots, and then the IBM logo and then the Safe Mode Screen.

I have tried running the repair module from an o/s disk I have here, but when I get to the c: prompt and type "dir" it says "error occurred during directory enumeration".

There is only one partition.

I have a copy of UBCD4WIN, if that would be helpful in diagnosing the problem.

I do not have the o/s disk that belongs to this computer.

Any help would certainly be appreciated. Thank you.

A:PC Stuck In Safe Mode Loop - Wont Boot Windows - Can Someone Help?

See what you think of this.


Read other 2 answers


My when i start my computer its a black screen and says

Checking file system on c:
file type system is ntfs

I have pressed f8 and tried to load safe mode but its says its loading with loads of writing on the screen but just stays on that and doesnt load.

I have also tried all the other options when u press f8, boot from hard drive etc etc and all leads me back to thr black screen with the checking file system c.

I have a windows boot cd which enable me to boot in to something called mini windows xp but this is very basic and only enables me to access the internet.

Please help its driving me up the wall

A:black screen and windows wont boot safe mode. please help

Mini Xp might be Hirens boot cd do not use it. We do not recommend it here, and we do not give out advice about hirens boot cd.

Try going back to the Safe Mode boot option screen select Advanced then select your lanuage then select "Repair your Computer" then select more options then select Command Prompt .

Type in then hit enter.


this will attempt to repair any errors let the process finish.

Read other 15 answers

Whats going on guys,
I have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen

and my CPU would reboot, i even tried the other Safe Mode options (command prompt, networking, etc.) I still couldnt accomplish logging into a Safe Mode. But I could still log into Windows Normally.

BUT Now (after changing my SAFEBOOT option in MSCONFIG, thinking i couldnt log into Safe Mode that way), I cannot even log into Windows XP (PERIOD.) Normally or via Safe Mode, Last Known Good Configuration, or any-other way. My CPU loads up and once it reaches the Windows XP Splash Screen it appears to be normally loading, then my screen goes blank and my system reboots, It reboots in an endless loop, i could leave this sucker on for a whole month and it would still be in an infinite boot loop between the start-up of the CPU and the Windows XP Splash Screen..lol

my problem is similar to this guy's


Before I get any suggestions....

Yes, I have a Windows Xp Recovery CD that i created using an .ISO image burning application.
Yes, I tried chkdsk /r
Yes, I changed by boot configuration in the Recovery Console using BOOTCFG. I'm aware the problem was ... Read more

A:XP won't boot past Splash Screen, wont boot in Safe Mode.

First thing I would do is back up your important Data now.


You don't reinstall XP from the recovery console?


Read other 1 answers

Hi thanks for taking the time to read this.
I was working on my comp when the yorkshire police virus locked my screen asking me to pay 100 pounds so I restarted my comp once or twice and now windows wont boot up.

I cant get access to the safe mode my comp starts loading up screen goes blank then it starts loading up again. I done a scan and I got biohd-8 fail after 75%. I did read somewhere that this virus can do that but I can find any help on how I can recover my children's pics from when they were young.

I tried using Ubuntu on a dvd but I cant access my windows folder once thats booted up

You've probably guessed by now I haven't got a back up

Can anyone be any help I really don't wont to lose these pics its the only copy I have

A:Yorkshire police Virus now windows wont boot no safe mode

Windows Defender Offline

You can try the WDO tool to remove the virus.

You will need to use a working computer in order to burn the program to a bootable CD/DVD or USB.

Hope this helps,


Read other 9 answers

My computer was having trouble saying application errors so ran it in safe mode for a while now ive reconfigured it so much it boots to a certaian point and stops

A:Wont boot even in safe mode



Read other 1 answers

Have a computer with windows xp and after it logs on to desktop, it freezes. No mouse no keyboard and it has active desktop recovery on with NO icons. Tried booting in safe mode and keyboard/mouse locks up on log in, can't boot in safe mode with command prompt either. help?

A:Wont boot in safe mode

Hi, mdotdiddy In order to review the system, we will need to create a bootable CD. Do you have a Windows XP installation CD?

Read other 1 answers

I have Windows XP (Home SP2). My PC won't boot in Safe mode. It ignores the F8 key. I recently (with TechSupportForum help) cleaned out a trojan. I don't know if the failure to recognise the F8 key is a legacy of this process. It certainly used to do it, last time I tried, but that was some time ago. Can this be fixed? Or is there an alternative way of booting into Safe Mode?

A:XP wont boot in safe mode

buy an new keyboard/reinstall it if it came with an cd

Read other 5 answers

I hope I have put this in the right section, forgive me if not.

I was wondering if anyone could help me with a problem I have been having.
My Dad's computer doesn't seem to want to start at the moment. It goes to start up, the initial screen comes up, and then the second screen that flashes up (the black screens with the white writing...I hope this is making sense!), and then after that it just beeps and then starts again.
Sometimes it goes onto the screen with the options of start windows normally, start windows in safe mode, safe mode with networking etc...but none of the options work, it just restarts again with the same result.
He had to borrow an XP home disc from my uncle as his computer is, well was, running that and he cannot find his own, but it wont boot from that disc. I have been into the bios to enable it to boot from disc first. He also has a back-up disc which he said had a repair function on it, and that works, yet after it apparently repairs things, there is no improvement. There isn't anything else useful on that disc. After exiting from the contents of the disc a black screen comes up with A:\> I tried typing D:\> but it said it was invalid. I then typed C:\> and the c promt came up, but everything I tried typing such as CHKDSK returned the message 'bad command or filename'.

Does anyone have any ideas of what's going on and how to fix this? If he had his own XP disc would that work? I have heard there are programs ... Read more

A:PC wont boot, even in safe mode


Some specs on the PC would help

How old is it

How much memory installed

Yadaa, Yadaa

Read other 3 answers

My daughters computer will shut down on its own, I have tried to start in safe mode with f8 key but does not boot in safe, I have tried the msconfig but when I do "run"...."msconfig"...the window that pops up to change settings automaticaly closes on me before I can adjust things. This also happens when I try to open regedit . At a loss here. I know she got a virus a while ago from "startzone"? But since I am unaible to change settings to boot in safe I dont know where to go from here? tia.

Read other answers

right now i have a blue screen and i am trying to boot into safe mode. I click on boot into safe mode then a matrix looking thing comes up, then it boots then i get a blue screen. how can i boot into safe mode?

A:why wont boot into safe mode?

Could you give us the STOP code from the blue screen that appears when you attempt to boot into safe mode?

Read other 3 answers

Hi I have a PC that wont boot it gets to just before login screen and restarts, then comes up with launch start up repair, i tried boot into safemode, but just when all the drivers load it also restarts, and i tried enable last known good config and it restarts, im thinking hardrive is dead? any ideas?

A:wont boot or go into safe mode

Well Trevor mate without knowing what specs the machine is or how old it is it is very hard to say what is wrong - some system specs would be really helpful System Info - See Your System Specs

Also have a read though this Troubleshooting Windows 7 Failure to Boot

If by any chance you can get into safe mode please run these
SFC /SCANNOW Command - System File Checker
Disk Check < if necessary include the /f and /r in the command line as per Option2

Read other 3 answers

XP Pro Wont Boot (Safe Mode with N/W will).

(1) Power interruption last night.
XP Pro wont get past the black loading screen with blue moving bar.

(2) Booted in "Safe Mode with Networking".
Can surf internet OK.
Can run a few sample programs OK.
Ran error checking on C drive - checks out OK.

(3) Restored to a few days ago (still in safe mode).
Rebooted with same problem.

(4) I just happen to have a dual boot with XP Home (a left over, not used anymore).
XP Home boots OK.

(5) I get the impression (with lots of stuff working in safe mode and disc checking out ok) that there's something "simple" happening under the covers that XP PRO gets stuck on.
Are there any other diagnostic tools to help?

(6) If not, is my next step to reinstall XP PRO (followed by SP2) ?
Will I have to reinstall all my applicatons (oh no) ?

Thanks in advance - Phill.

A:XP Pro Wont Boot (Safe Mode with N/W will)

Read other 8 answers

Hope someone can help me.

I start my computer and it goes to the screen that lists "start in safe mode", etc. I have tried all choices and it tries to start but then loops back to the same "start in safe mode", etc. screen. I have tried F8 F10 F12 and trying to boot up from the Windows XP cd. It just keeps looping back. I have called Geek Squad and they can't come check it for a week. I hope I can fix it on my own. Is there a way to get around the loop and boot up or is it toast.

Desktop - HP bought around 2002
Windows XP

Read other answers

Hello all, newbie here and competely lost. Here's the sad story. I was wiping the keyboard off with a dry napkin while having my eye's on the tv for a second. All of a sudden I hear the harddrive take off and things starting to happen. The last thing I seen on the screen was the word hibernate... in the middle of the screen, just before everything shutdown. I've never used hibernate in my life, not even sure how. Anyway, now my pc wont boot up, not even in safe mode. All I get is a black screen with white letters. It says:The last attempt to restart the system from it's previous location failed. Attempt to restart again? Delete restoration data and proceed to system boot menu. Continue with system restart. That's it, there's no cursor or nothing works. I've hit every key and rebooted a thousand times and I just get the same screen. I don't even know the easy things to do on these so I'm hoping this is just something simple that everybody knows about except me. So somebody tell me what key to hit to fix this please. Thanks

A:XP Pro wont boot or safe mode


Read other 1 answers

Win 7 Normal Mode won't start, will go past Starting up Screen and just hit a Black screen and will hit a Crash Dump (blue error screen)..... I can boot into safe mode fine and I have fun CHKSDK and after a reboot it fixed a few problems but I hit the same Crash Dump Screen. I have also made sure my whole pc is all clean and connected, no corroding parts etc etc, made sure my pci-e slot is default etc etc, no luck at all...

Its a new installation and worked fine last night and early this morning after separate boots. But as soon as I booted this afternoon it wouldn't load and would hit the blue error crash dump screen....

So any suggestions?

Just last night My main HDD died also which is why I had to use my secondary HDD as my main....


A:Win7 Normal Mode wont boot, Safe Mode works though... Help?

1) When you "ran checkdisk" dis you run it with the "/r" switch? If not, please run chkdsk /r now.2) Download BlueScreenView:http://www.nirsoft.net/utils/blue_screen_view.htmlunzip downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

Read other 5 answers

Haven't really been up to this one before, so hoped anyone here could help me.

My WinXp Sp2 (Home edition) are starting up fine in normal mode, but when i try to start up in safe mode, it starts loading the files, and after a short while it comes up with a message to "Press ESC to cancel loading d347bus.sys..." It then restarts again..... I can't see any changes weather or not i press esc.... And starting in normal mode, everything looks fine.

Any suggestions?

A:WinXp wont boot in safe mode

I found this googling your partial error message. It seemed to work for that guy on January, 10th, 2005.a blog with similar problem - resolved

Read other 1 answers

Hi I have a hp mini 110 and it only works in safe mode, I have read countless threads and tried almost all of them. My hp runs XP, could that be the cause of it not running properly??? Please help.

A:HP mini 110 wont boot unless in safe mode

try a clean boot
How to configure Windows XP to start in a "clean boot" state

Read other 4 answers

Hi, Heres the bsod message I get :line 1) stop: 0x0000007e ( 0xc0000005, 0xf894a29c, oxf8950500, oxf8950200 ) line 2) pfc.sys- address f894a29c base at f8949000, date stamp 3987f8fc

Thats it..XP pro...I have the hard drive thats doing this as my slave drive now (using an old 8 gig as my master) is there any way I can find & fix this problem with the drive being my slave drive now?? It wont boot at all, not even safe mode but seems fine as a slave drive, passes chkdisk , no prob. is there a way to reinstall windows to a slave drive?? thanks guys, IM really stumped on this one.......T

A:BSOD wont let xp boot, Not even in safe mode!!!

Read other 16 answers

I have a gateway pc with pentium 4 , and when i start it up it shows the gateway screen then it seems like its gonna load up windows xp and then the screen goes to power save mode, and i have to shut the computer off manually. If i start it in safe mode it works.

A:computer wont boot up all the way unless in safe mode

Hello juice27

Have read here

Read other 1 answers

i installed fresh XP PRO and it will not boot unless i boot in safe mode, anyone can help me??

A:Xp Reinstall And Wont Boot Except In Safe Mode

What does it do when you try to boot into normal mode? Any error messages, etc?

Read other 25 answers

Hello. I'm having some problems with my PC, appreciate any help.

When I started my computer today, it got passed the windows logo screen and keeps bringing me to a screen that lets me choose between booting up in:
safe mode
safe mode with networking
safe mode with command prompt
restart manually
last known good configuration

not matter what I pick, whenever it goes passed the windows logo, I still get the same screen w/list of choices

I am running on a HP pavilion mx70. windows xp

thank you

A:Computer wont boot up, not even in safe mode

Please do the following:Get a look at the error message presented by the BSOD (blue screen of death) ....Start tapping the F8 key after you press the ON button, and continue tapping until you are presented with the "Windows Advanced Options Menu" screen.
Use the UP/DOWN arrow keys to select "Disable automatic restart on system failure" and press the <ENTER> key.Your system will attempt to restart normally, but when it crashes, it will not re-start: Instead, you will see a BSOD with error message.
Record the error message details (contained in the areas outlined in red, in the above example image), and post in your reply.

Read other 27 answers

Basically what I want to do is to repair/recover my OS so that my system boots up again normally and I wont lose any applications that I have. Problem is when I put in my OS disk, I got to the stage where it asked me if want to do a fresh installl, or a repair install. I hit 'r' and it asks me for an administrator password which I have no idea of

How do I repair my stem

A:computer wont boot up or go to safe mode

to do a repair install
set the bios to boot from cd first
pop in the disk
choose install
ignore the first repair option [R] and continue with install
when windows finds the previous installation
then do the repair

Read other 6 answers

I have a Dell Studio XPS8100 running with Windows7 Home Premium Service Pack1, 64-bit OS.When I purchased it I also had Dell put in a Tv card (Hauppauge WinTv HVR-1250) figuring I might be able to watch some of the Tv Channels from the area where my family lives.

Anyway here are the list of issues I have been having over the past couple years. The first issue I noticed was when I went into Windows Media Center and clicked the Internet TV feature or the program, the Windows Media Center program would shut down. So I called Dell and they worked on the issue for a couple of sessions that included numerous hours of my time and might I add the difficulties in understanding the tech, but the end result was that the issue was never fixed and so I just gave up on the tv feature all together and started using the computer to do Cad drawings which is the main reason I had purchased the unit.

Over the next couple of years working with the unit I noticed that once in a while Explorer would stop working and restart itself once in a while, Then the other day I installed a new Cad program and the program would starts itself to the part of the program where I would start using it and then just dissapears of the screen.

In the same fashion that Media Center did. So in trying to figure out if I could fix the issue, thinking that perhaps another program might be conflicting with the Cad program, I decided to start the computer in Safe Mode, when I do that the computer boots in safe mode ... Read more

A:Computer wont boot in safe mode

Is this still the Dell preinstalled Win7? Most tech enthusiasts would never run such a corrupt install larded with all the sponsored bloatware and duplicate utilties, but instead get the superior Clean Reinstall - Factory OEM Windows 7.

Otherwise you can work through these Troubleshooting Steps for Windows 7.

Read other 1 answers

Hey, I knew it would be sooon!!
My computer refuses to boot into Regular Windows XP. It will boot in Safe Mode. Only recent install is SpyBot S&D. Roller Coaster Tycoon Continues to grow in size could be problem. Forgot to mention, no error message. Just continues to show the black loading screen with the XP logo.
Edit again-- I have like 1000 of these .IDX files in My Documents. I just noticed them as i never use My Docs.

A:Solved: XP wont boot except Safe Mode

Read other 10 answers

I was infected with antispyware soft virus few days ago - while in the process of dealing with it I disables all the STARUP program from msconfig.

Now when start the computer it wont boot - only black screen.

If I press F8 after starting I see the option for SAFE MODE etc but when selecting any of them won't start any thing - just black screen.

This is EeePC notepad with XP without any dvd/cd drive - can something be done only using the USB

Thanks in advance

A:my computer wont boot even in safe mode

Hello and welcome to TSF.

Sorry for the delayed response. The forum is very busy.

Does your motherboard support booting from USB? If so, we may be able to help. Please let us know.

Read other 4 answers

I have a Compaq Presario Computer with windows XP on it. recently i started getting an error message which says lsass.exe and the computer doesnt go any further after I click on ok which is the only option there. It just goes to a blank black screen. someone mentioned to me that i should try to do a system restore on it through the safe mode, but that doesnt work either becasue same error comes even in safe mode. i have tons of data on this computer and i cannot afford to lose it. i need a way to recover my data. it seems to me that the only option i may have is ot do a system recovery through the cds that i got when i purchased the computer, is that true? someone also mentioned to me that if i have the Operating System CD then i might not have to do anything but just repair. How does this work? I cannot seem to find the O.S cd, where can i get it from? Is it the same as the Windows XP cd? also, this problem has been occuring since a few days now and of course i havent been turning on the computer since there isnt much i can do, so by this problem just being there is it making it worse or not? i just dont have the time right now but does that mean that the problem just sitting there is harming it further? Some people have also told me of how to recover data using Ubuntu or something, how good is that? please help me in this asap. thank you so much

A:Compaq Presario wont boot up even in safe mode

You can use a number of Linux distros to tunnel through the back door of a Windows system for the purpose of rescuing your files but if you have to burn a CD, it may as well be Hirens BootCD which includes MiniXP and once in there, you'll be in familiar territory to find and copy out your data on to memory sticks or an external hard drive.

When you've got it all, then go for the computer manufacturer's recovery disk and it won't matter too mucj if it restores the machine to the day it left the factory. You'll lose any programmes you've installed since then but hopefully, you'll still have the installation disks for those.

Read other 2 answers

Hello Everyone, as mentioned i have the safe mode directly into my boot menu. but it no longer will open, it goes straight to the window start up. how can i get safe mode to boot from the menu? Thanks

A:Safe Mode From Boot Menu Wont Open+fix?

Hi there,

First off, what is your computer issue? Are you using a desktop or laptop computer?

Read other 1 answers

I have an acer laptop that I can not get to boot up even in safe mode. I have even tried to boot from my recovery disc with no luck. Any suggestions?

A:Acer Laptop wont boot up even in safe mode


Do you get the basic startup? with the bios and everything?
If so, try pressing f8 and go to the option: disable automatic restart on system failure.
If I'm correct you will be getting a blue screen of death (a.k.a. BSOD).

also you will get a message which sould say something like: 0x0000000xx ( where the last 2 x's stand for a number or letter)

Could you post that code?

Read other 5 answers

I installed what I thought was an updated driver for a PCIe eSATA card and since then get only the Advanced Repair options, none of which work.

The nearest I get is System Restore which finds the OS and the restore points but fails with this error, reading in part:
The inst. @ 0xfba6ca53 referenced memory at 0x0021cd49. The memory could not be read.
Or words to that effect.
None of the other options work except Command Prompt and I have no idea how to use that in this situation.

I have the only options of
a) Full Win 7 install, overwriting everything or
b) Running a Win 10 disk over it and upgrading in the hope it will preserve my files and settings.
But it may also not boot because that damn driver will still be there.

Help !! I'll monitor this from my 10 drive as best I can.

A:7 Wont Boot (nor Safe Mode) Repair Not Working - HELP !!

Can you remove the PCIe eSATA card and see if the PC will boot ?

Read other 9 answers