Over 1 million tech questions and answers.

Default settings in IE

Q: Default settings in IE

Hi All,
Just wondering if anyone can tell me the default settings in this area:

Tools > Internet options > Accessibility > formatting

...there are 3 boxes, and I cant remember whether they default to all unchecked, all checked, or some of both.

If any one can help that would be much appreciated.
Im on IE 6 XP Pro and SP1 (just an aside...last day for M$ support is 10-10-06)

TIA
Musicalls

RELEVANCY SCORE 200
Preferred Solution: Default settings in IE

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Default settings in IE

They should all be blank(unchecked). Well, they are in my IE.

Regards Howard

Read other 4 answers
RELEVANCY SCORE 51.2

Hi,
Yeah, you may think this seems like just a normal message from oc'ing too much, but a problem-I haven't overclocked anything! It booted to that point, then my hard drive went mad clicking and crashed. This was after it being turned on and off to see if my graphics card was booting because I had no video, but it turned out I had just been downright stupid and plugged it into the onboard graphics. Anyone know what could have happened? Thanks

P.S. would the power drawing thing (molex on my case fan) need to have a seperate connector or just draw power from another device? Thanks.
 

A:'Previous overclock settings failed, default settings enabled'

If this happens just once then I wouldn't worry about it too much but the PSU or HDD could have something to do with it.

You can connect a molex connector fan to its own power connector or you can put it on an optical drive's connector for example, but it's ok to do either as they don't use much power.
 

Read other 9 answers
RELEVANCY SCORE 50

My daughter got a hold of my mini HP and I can't figure out password what do I do

A:Bios settings for Mini - what are the default settings

Hi, Are you referring to a Windows log on password or a power on password? If it's a power on password, at the password screen, hit enter 3 times and you should receive a 'halt code' - post back with this code. Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 46

(windows 7) I accidentally messed up the security settings in the "Default Folder" (a shortcut?) of the Users folder.
I removed administrators permissions , that caused my pc to be unable to restore to previous restore point correctly. However, I was able to re-add the admin permission and everything now is fine.
Yet I need help here.
1 could anyone post screenshots of the default "default folder" security settings? I need to set it back to the default one even though now it works fine.
2 why the hell does that folder NOT HIDDEN? Are yours not hidden as well? Of course the option to hide all system file is checked on my pc. The only reason I messed with that folder is because I thought it was just a normal folder and not a system folder. Anyway to get it back to be invisible?
Thanks for helps in advanced. And I don't want to go to Microsoft supports because they always give robotic replies with no helps at all.

Read other answers
RELEVANCY SCORE 44.8

My boyfriends computer wouldn't start up so we had a tech (friend) look at it. He did somethings to the computer including replacing the video card.

Now all of the programs are in the start up menu and starting when the computer starts up, but thats not the problem. I had gone into the start up menu and unchecked all those I don't want to start up and also went into some of the programs themselves and set them up so they did NOT start up when computer was turned on.

Everytime the computer is turned on all those programs still start up and the tool bar at the bottom is loaded with program icons.

Why do the programs keep going back to the default settings and how can i fix this.

Thank you in advance for your help

justanotherproblem

A:default settings

Did you go into the startup folder: start/all programs/startup and remove programs or did you go into msconfig: start/run/type msconfig and hit enter, go to the startup tab and uncheck programs you did not want to start?

Read other 5 answers
RELEVANCY SCORE 44.8

I have a new Vista laptop which I have networked with my old XP laptop for the transitional period. My Vista machine has M/S works installed. It also has a trial version of M/S Office which I am not familiar with, and which I do not think I am going to use, unless there is reason for me to change my mind. My XP machine has only M/S Works with which I have been very happy. The problem is that when, using my Vista, I access an M/S Word document which is in my XP machine, it opens in MS Office Word. How can I change the default to make the document open in M/S Works Word ? Allan.
 

A:Default settings

Uninstall the trial version of MS Office, problem solved.
 

Read other 2 answers
RELEVANCY SCORE 44.8

hi all can i get info on how 2 change all my setting back to default as i have swapped pcs and the kids 1 has old monitor and i have big lcd and now after me using theres on mine i have changed the setting but now there all 2 big for the old monitor pages 2 big everything 2 big so i thought if i changed windows back 2 default it would fix problem
 

A:default settings???/ xp pro

Read other 11 answers
RELEVANCY SCORE 44.8

Hello, I encoutered some problems when I play around with wmp.

I want to build a small applications with in wmp by using visual studio.
In my applications, I want to change some setting in wmp.(eg. in the sync option, there is one called "create folder hierarchy on device")

Is there any way I can set up this in anywhere?


thanks...

Read other answers
RELEVANCY SCORE 44.8

I have windows 7 ultimate 64-bit and I was messing around with the settings in the Display Panel. Is there a Default Setting to get it back the way is was?

A:Default settings

Hi please post the make and model of your computer

Read other 3 answers
RELEVANCY SCORE 44.8

Hi Everybody!! I recently messed up real bad. I was playing Tiger Woods PGA Tour 08 for PC. And I went into the documents folder to try to delete the last saved game. When I did I made a mistake and changed the folder with a GCF file in it to open the GCF files with adobe reader. Now I can't figure out what program it originally was suppose to open with. So my question is: How do I change the GCF file folder back to it's default settings so it will open with the program that it's suppose to open with?

A:Default Settings

Hello Wan, and welcome to Vista Forums.

If this helps, this is what I found for this:






Valve Corporation uses .GCF games cache files both with its Steam computer game online content delivery platform (used for downloading computer games and content from the Internet), and with its Source 3D game engine (used to render realistic 3D graphics in their games). Valve Corporation also developed the game Half-life (along with its sequels) and the .GCF files is sometimes specifically associated with this game, although it is entirely possible that .GCF might be generated by any of Valve Corporation's games..



If you have Half-Life or another Valve brand game, then reinstalling the game to repair it without uninstalling it should fix the file association also.

Hope this helps,
Shawn

Read other 3 answers
RELEVANCY SCORE 44.8

hi all

I just installed Vista and i'm trying to restore de default .ico settings. In Win XP I can see the file.ico default icon but in Vista i can't see the icon. I've search on the net, but nothing

this is how it looks

Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.ico]
"Content Type"="image/x-icon"
@="icofile"
"PerceivedType"="image"
[HKEY_CLASSES_ROOT\.ico\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[HKEY_CLASSES_ROOT\icofile]
@="Icon"
"ImageOptionFlags"=dword:00000000
[HKEY_CLASSES_ROOT\icofile\DefaultIcon]
@="%1"
[HKEY_CLASSES_ROOT\icofile\shell]
[HKEY_CLASSES_ROOT\icofile\shell\open]
"MuiVerb"=hex(2):40,00,25,00,50,00,72,00,6f,00,67,00,72,00,61,00,6d,00,46,00,\
69,00,6c,00,65,00,73,00,25,00,5c,00,57,00,69,00,6e,00,64,00,6f,00,77,00,73,\
00,20,00,50,00,68,00,6f,00,74,00,6f,00,20,00,47,00,61,00,6c,00,6c,00,65,00,\
72,00,79,00,5c,00,70,00,68,00,6f,00,74,00,6f,00,76,00,69,00,65,00,77,00,65,\
00,72,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,33,00,30,00,34,00,33,00,00,00
[HKEY_CLASSES_ROOT\icofile\shell\open\command
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,72,00,75,00,\
6e,00,64,00,6c,00,6c,00,33,00,32,00,2e,00,65,00,78,00,65,00,20,00,22,00,25,\
00,50,00,72,00,6f,00,67,00,72,00,61,00,6d,00,46,00,69,00,6c,00,65,00,73,00,\
25,... Read more

A:default .ico settings

Have you installed any third-party image viewers (such as AcdSee) that has changed the default display for icons? This is the only action that could possibly cause the symptoms you describe...

Read other 4 answers
RELEVANCY SCORE 44.8

Hello,

Some how I managed to change my default that my Windows Media Center keeps opening up instead of what it should be.

Examples: start window - internet Explorer - I get my windows media instead.

When I go into start - Default program - Set program access and computer defaults. When I try to access it my windows media player pops up.

John

A:W7 Default Settings

  
Quote: Originally Posted by 6142john


Hello,

Some how I managed to change my default that my Windows Media Center keeps opening up instead of what it should be.

Examples: start window - internet Explorer - I get my windows media instead.

When I go into start - Default program - Set program access and computer defaults. When I try to access it my windows media player pops up.

John


You need to change the default open with. Instructions are here Open With - Change Default Program

Hope this helps

Ken

Read other 1 answers
RELEVANCY SCORE 44.8

Hi,
I have this problem, whenever I insert my pen drive, or anything else, Adobe lightroom always wants to open up?
All I want is for windows explorer to open up, not lightroom
I have set the defaults in the default programs for windows explorer, but lightroom still wants to open?
Why is this always happening??, after I save everything for explorer to open??
Can anyone advise me please?
Thanks
Rip

A:Default Settings

Originally Posted by riptorn


Hi,
I have this problem, whenever I insert my pen drive, or anything else, Adobe lightroom always wants to open up?
All I want is for windows explorer to open up, not lightroom
I have set the defaults in the default programs for windows explorer, but lightroom still wants to open?
Why is this always happening??, after I save everything for explorer to open??
Can anyone advise me please?
Thanks
Rip



open regedit,'
navigate to hklm\softwares\microsoft\windows\currentverson\explorer\autoplayhandlers\eventhandlers

there u can edit the options for the arrival of your usb stick

Let me know if u find any dificulties

Read other 7 answers
RELEVANCY SCORE 44.8

[b]hi everyone i am new to this so hope you can help.when i try to alter the default program settings in xp home it will not work. it keeps resetting to the old ones. i have tried to set to microsoft settings but it is still the same.any advice?(Moderator edit: moved thread to more appropriate forum and expanded Topic Description. jgweed)

A:Default Settings

Can you be more specific about which program settings you are trying to change and what procedure you are using to try and change them?

Read other 4 answers
RELEVANCY SCORE 44.8

Administrator is dead and I need to add devices to my computer. We don't know the password.

Read other answers
RELEVANCY SCORE 44.8

Can I change the default settings for Font and Font Size, and the Page Margins in WordPad and Microsoft Works 2000? If so, please tell me how. I am getting tired of having to manually change the settings every time I start a new document. Thank you, Robert
 

A:default settings

I don't believe this can be done in WordPad.

However, in Works:
Change Works Default Font
Selecting the default font in Microsoft Works is a simple matter. Open the MS Works word processor and in the menu bar to Format | Font | Style. Click on Font and Style and a dialog box pops up. In the dialog box, choose your font by highlighting it, then highlight the font size that you prefer. Select a color if you choose or leave the color on auto. Move to the right side of the dialog box and click on the Set Default button. This font choice will appear every time that you open Works. If you are changing the font for a single document only then click on the OK button. Click to expand...

and
Q. Every time I create a new document, I want it to follow a specific style, such as using default margin settings. How do I do this?

A. To specify custom settings that apply to each new document, you should create a blank document with those setting, and then save it as a template. To do this, use the instructions below:

Create a new document and apply any settings you want in your new documents. For example, if you want all new documents to have a .5-inch margin, apply that change in the Page Setup area.

On the File menu, click Save As.
Click Template.
Type a name for your template. To use this template for all new documents of that type, select Use This Template For All New Documents.
Click OK. Click to expand...

Using this second bit of advice, you can change both the font ... Read more

Read other 1 answers
RELEVANCY SCORE 44.8

I was told that there is a setting that allows you to restore " default settings" if i am a user and i downlload a program from the net . When the machine is rebooted it is gone? win2k.. We have about 400 users and they can download anything all the cute screen savers and cursors then complain about a slow machine. I realize that i am fighting this battle from the wrong end the the other end is not at my control
thanks
 

A:default settings

There are ways to restore defaults to individual applications or OS components, but I am not aware of any "global default restore" capability. The closest I know of is with XP where you can roll-back the system to a previous checkpoint if the right options are enabled. But, there is even a problem here... if you don't know what you're doing you can "un-do" legitimate changes to the system. You may have better luck by figuring out how to use "permissions" to restrict what the users can and cannot update.
 

Read other 2 answers
RELEVANCY SCORE 44.8

Administrator is dead and I need to add devices to my computer. We don't know the password.

Read other answers
RELEVANCY SCORE 44.8

Looking for default settings as they were during installation. Whether there may be somewhere on my drive or can de downloaded from the web in the part that is independent of hardware?
Tnx

A:Looking for default settings

Hello R063rt, and welcome to Seven Forums.

Anything particular that you were wanting the default registry settings on.

If not, then the only way is to do a clean install, or possibly a repair install, to have everything default.

Read other 7 answers
RELEVANCY SCORE 44.8

every time i install a new program it sets itself to open with Microsoft word and i have trying to figure out the solution to change that but i cant 
what can i do?

Read other answers
RELEVANCY SCORE 44.4

New Windows 10 Home Computer, set up using PCMover from Windows 7 Home Premium Computer. A few problems, of course, so far mainly applications that did not transfer properly, and those easily solved.

One problem however I don't understand, and, therefore, cannot fix. I've gone into the settings for default applications, some of which are constantly ignored. I know that they are ignored, as WinPatrol keeps notifying me of attempted changes. One such pop-up is on the screen right now, stating that a change for files with the extension .avi have been changed from the setting to use VLC media player to use Windows Media Player. I clicked on No, to reject the change, whereupon a new one, this time for .cab files popped up. I will reject it, and a series of such changes will appear and be rejected.

This keeps happening, always for the same extensions, and I don't know how to stop it. Chants, exorcism instructions, banishment methods, all such would be appreciated.

A:Ignoring Default App Settings

Hi, some things you might (not) wish to know about default programs in Win 10:
a. A very few old version programs, if installed, cause defaults to revert to MS default on restart. E.g. Winzip.
b. Hyperlink association needs to be explicitly set in Control Panel, Default Programs, if changing browser or if unassociated.
c. Some people experience associations changing on Windows updates. Cause unknown.
d. Major upgrades (= Windows reinstall-like procedure) e.g. build 10580 in November cause associations to be reset. (MS might get this right next time).
e. Even when you have assigned associations, you might get a confirmation prompt using 'Open with'.
f. From Win 8 you can't set associations from within programs. Most such attempts do not give warnings.

I've not seen your specific problem reported. I'd suggest checking the programs you've transferred and have installed for old versions, and eliminate that possibility.

Also try a clean boot and see if the same symptoms arise.

(As an aside, I used Laplink's PCMover Image Assistant - uses a mounted disk image of the old PC -faster than the original PCMover)

Read other answers
RELEVANCY SCORE 44.4

I had a prompt to say my computer security settings were putting me at risk so reset them to default. Now I can't access anything! Working on an old Windows 7 toshiba laptop. Help??
 

Read other answers
RELEVANCY SCORE 44.4

Ok so I have a Toshiba Satellite model A135-S7404 I no longer have the discs for this computer because I thought I would never have to use it (stupid me)
I really want to set it back to factory default settings but I have absolutely no idea how to do that every one tells me I have to have a disc to do it but like I said before I no longer have the discs so what do I do???
thanks
 

A:factory default settings???

Some pc's provide a restore partition (.IE,normal operating partition is c and the restore partition may be D)
Your user's manual will detail if you have a restore partition and if so,how to use it to get back to "out of box " condition.
If not,you might be able to go tho the Toshiba site and secure the restore discs for a fee.
 

Read other 1 answers
RELEVANCY SCORE 44.4

Hi,

I have got my user profile setup the way I like it with the desktop icons, settings etc. How can I copy these settings to the default profile? I have tried copying the links folder to the default profiles links folder which does the sortcuts on the desktop etc but it doesnt do the computer icon or user profile icon. I have read that I need to edit some registry settings but I cant find any specific information anywhere. The point of what im trying to do is when a new user profile is created, it will automatically look the way I want it and software EULAS will already be set for example - it's to be used for an image.

thx

Read other answers
RELEVANCY SCORE 44.4

Don't ask me how I did it, but I must have changed a setting when in MS WORD or WIN XP.

PROBLEM:
EVERYTIME I print a doc on MS WORD, a doc summery sheet is printed too.

How do I turn this off? It is driving me crazy and wasting paper and ink!

Please respond in DUMMIES 101 style.

thanks!
 

A:DEFAULT print settings

Try printing something via File -- Print. With the "Print" dialog displayed, click on "Options". You may find that "Document Properties" (under "Include with document") is checked -- if so, uncheck it & continue the printing. This should reset it for subsequent prints.

HTH,
Andy
 

Read other 1 answers
RELEVANCY SCORE 44.4

Hi All

I have just installed a new printer however when I go to print it wants to send a fax. So I have to manually change the setting to the printer every time I want to print.

Does anyone know how I change the default printer setting to my printer and not fax option on the printer.

Cheers
 

A:Default printer settings.

have you got two printer elements in the list - one for printer and one for fax
if so
click on the printer one you want to set
right click on it
and you should be able to
set as default printer
 

Read other 1 answers
RELEVANCY SCORE 44.4

Can I change the default settings in PSP7 (and PS6) to JPG?

Now, I save something I have to stop and scroll down and pick JPG.

I looked in PREFERENCES and in the SAVE box and don't see anything.

I'd rather have it as JPG and if I want to use something else (GIF, or even PSP I can scroll to that). Since I mainly save as JPG.

~ Carrie
 

A:Can I change the default settings?

Read other 8 answers
RELEVANCY SCORE 44.4

I prefer to view details versus icons when I open a folder. I change the views to details but eventually, icons always return. Is there a way to change the default folder views to detail and have it stay that way?
 

A:Default view settings

Hi,
You may try this:

Open "My Computer", menu Tool/Folder Option, Under tab View, check "Remember each folder view setting"
 

Read other 2 answers
RELEVANCY SCORE 44.4

Is it possible to set the defaults of the normal.dot document to automatically include a documents filename and path, page number, date, author, person who last saved the document & the details of the last time it was printed?

T.I.A.
 

A:MS Word & the default settings

I think I may have just answered my own question. I just had to find the 'normal.dot' template and make the required additions to that and save. Is this the only way to do this, does anyone know?
 

Read other 2 answers
RELEVANCY SCORE 44.4

Hello, I'm new on SevenForums and I need to help.

I was testing my Small Basic app, but when I launched it, the TextWindow font size was only 4?6 pixels.
So I launched the Command Prompt via Run, and the size was also 4?6.

In Properties, there were only 4 tabs and 9 sizes of Terminal font. The default one, 8?12, wasn't in the options.
I can show you screenshot of Properties window. (I'm using WindowsBlinds 8 with Mac skin, where active tab texture is same with inactive tab.)


How can I restore font size to 8?12?

It would be a big help for me if you post value of this:


Sorry for my English, I'm not a native speaker.

A:Can't change cmd.exe settings to default

You could try sfc /scannow and that would undo all changes/modifications, and then you could just reapply the settings in windows blinds and see if that helps.....maybe something went funky when applying the theme.

Read other 9 answers
RELEVANCY SCORE 44.4

I have office 2013 and use outlook for my email. When I delete a message it goes into my trash folder and not my deleted folder. Plus the trash folder keeps only a few days of deleted emai9ls. How can I change outlook to send deleted items to the deleted folder and also keep them until I want to delete them. My sent folder also just keeps a few days of sent item. I want to keep items in all my folders until I delete them. How can I do this? Thanks much....

Read other answers
RELEVANCY SCORE 44.4

Hello does anyone know where you can get a pdf of all the default settings for windows 7 home premium SP1.

A:windows 7 default settings

I did what I could.

Windows 7 Default Services and Suggested Startup Mode :: Windows 7 :: Articles & Tutorials :: WindowsNetworking.com

Read other 3 answers
RELEVANCY SCORE 44.4

Can anyone tell me how to restore the default security settings to my c and d drives? Or maybe just post theirs. I was messing with mine and can't seem to download from any sites.

I'm the sole owner and user of my pc so I would like to be logged in as administrator at all times. Running RC 7100.

Thank you

A:Default Security Settings

  
Quote: Originally Posted by polorsport


Can anyone tell me how to restore the default security settings to my c and d drives? Or maybe just post theirs. I was messing with mine and can't seem to download from any sites.

I'm the sole owner and user of my pc so I would like to be logged in as administrator at all times. Running RC 7100.

Thank you


Hi Polorsport, Welcome to the forum,

Maybe you shouldn't fiddle

Try doing a system restore System Restore

I hope this helps, otherwise my best advice is a reinstall

Pooch

Read other 1 answers
RELEVANCY SCORE 44.4

Malwarebytes does not recommend checking rootkits with its default settings when scanning so I  did not.  Why would this be recommended or should I check it anyways?  I think not.  Could it be that it would require much more time to check this pesky malware and the extra time needed would not be worth it?
 
It should be noted that I also have Microsoft Security Essentials and Webroot Secureanywhere endpoint protectoin (webroot being a closed system managed by Click for Support) whcih may presumably be monitiring rootkits already.  I am not sure? Thanks for any help!  

A:Malwarebytes default settings

Antirootkit technology in Malwarebytes Anti-Malware 2.0 is integrated into the scanner (under Detection Settings) in MBAM v2.0 but it is not enabled by default. If the "Scan for rootkits" setting is enabled, it will increase the length of the average scan time from previous versions which defeats the purpose of routinely using the recommended THREAT Scan to quickly check the most prevalent places for active malware....see Why is scan for rootkit off by default?Scanning for rootkits is only necessary for heavily infected systems or when malware symptoms are present but the THREAT Scan does not detect anthing.

Read other 7 answers
RELEVANCY SCORE 44.4

I have noticed that my default setting in the Add/Remove Program are not staying as what I set them to be, thus I am having problems with the Windows Media Player not playing the downloads from Limewire or Ares. I have tried to rollback the system, nothing changes.
Am using Windows Live Onecare on my system as it is better than what Road Runner was offering for free (it didn't block viruses and had a mess cleaning them all out).
Any ideas, thoughts or suggestions would be greatly appreciated!!!!!

A Computer Nerd here!!!!!

Read other answers
RELEVANCY SCORE 44.4

Does anyone know how to go about restoring WMP 64-bit to default settings. One used to be able to roll back to WMP 10, then reinstall 11. But that is apparently not an option anymore. Also not an option, so please spare me the posts, is a system restore; the problem occurred too long ago.

Here's what is going on. I used to be able to click on any VOB file in a DVD folder, and WMP would play the DVD. Somehow I broke that ability, messing around with codecs or settings or who knows what. So I want to go back to square one as far as WMP goes without having to take all of Vista with me.

Any help gratefully appreciated.

A:Restore WMP to Default Settings

You could do a system repair with a Vista DVD

Read other 2 answers
RELEVANCY SCORE 44.4

Folks,

In Word 2000...

In the Envelope & Label dialog, I keep changing the default Font & Font Size to my own preference (for envelopes); & it keeps resetting back to the old settings the next time I open the app.

What gives?

Also...how can I rid myself of the Office Assistant. I hide him (it...whatever) every time it pops up, but the next time I open a blank document & begin typing...here it comes again.

Thanks,

mark4man
 

A:Envelope: Default Settings?

mark4man said:

In the Envelope & Label dialog, I keep changing the default Font & Font Size to my own preference (for envelopes); & it keeps resetting back to the old settings the next time I open the app.Click to expand...

Next time you're in Env & Labels > Font dialog box, hit the Default button in the bottom left corner.

Also...how can I rid myself of the Office Assistant. I hide him (it...whatever) every time it pops up, but the next time I open a blank document & begin typing...here it comes again.Click to expand...

Try right-clicking him, Options, deselect Use the Office Assistant.
 

Read other 3 answers
RELEVANCY SCORE 44.4

Hi,

Recently my computer's internet gliched and I can no longer connect to any webpage. I think it might have somthing to do with me deleting route 0.0.0.0 on cmd. this is what I wrote:

route delete -p 0.0.0.0

Is there any way i can restore the deleted route?

A:How do I change cmd to default settings?

Hi and welcome to the Forum
Can you do a system restore to a point behind when you did the deletion? It would also beg the question why did you delete it?

Read other 3 answers
RELEVANCY SCORE 44.4

Good Morning,

I am looking for an instructional as to help me change the color settings in Windows 7 to the default color settings in Windows XP so I can run a tool in Microsoft Excel.
 

A:Default Color Settings

sure if it wil do the trick for you, but have you tried the desktop right click - personalise, and select the Windows Basic theme?
 

Read other 2 answers
RELEVANCY SCORE 44.4

I bought two new computers today for my business, both had the same hardware and software with windows 8 installed. I noticed that one of them they have some toolbars on the taskbar that the other one doesnt have, on one of the pc's there is an address bar labeled "Address"
 
 
 
The other PC didn't come with it activated by default, just wondering if this is normal. both these computers are brand new and identical. Maybe someone fooled around with it before sending it to me

A:Does windows 8 have default settings?

If they are truly identical, maybe someone turned one of them on at one point (and didn't turn the other one on).
Most computers are sold with tamper-proof tape holding the box closed - did yours have this?

In most cases, identical computers will have identical software.
The exception here is if the OEM has changed things during manufacture and is using a different image.

Read other 1 answers
RELEVANCY SCORE 44.4

k IM A BONEHEAD I DID SOMETHING TO MY COMPUTER TO MAKE PERFORMANCE BTTER BUT NOW THUMBNAILS DONT SHOW A PREVIEW OF THE FILE AND WAS WONDERING IF ANYONE COULD RTELL ME HOW TO CHANGE IT BACK???

A:Resetting settings to default???

Hello DevilMan, and welcome to Vista Forums.

This may be able to help you turn them back on.

Thumbnails in Windows Explorer

Hope this helps,
Shawn

Read other 3 answers
RELEVANCY SCORE 44.4

Hi as stated I cant change any of the default app settings in windows 10.
I tried to change my default browser to chrome,nothing happens after i click google chrome,its still edge.
This also applies to other defaults like maps,music player,photo viewer etc.

A:Cant change default app settings

Hello, have you researched this on the forum? Questions about this have been asked so often.. the forum is a useful resource tool.

Note that you cannot change defaults from within programs- true from Win 8 on.

Please see:
Default Apps - Choose in Windows 10 - Windows 10 Forums
Have you tried by these means?

Also note that there are special instructions about Chrome which you can find which many have had difficulties with.
Search
Chrome default browser
e.g.

Note too that a couple of old version programs e.g. Winzip if installed have caused defaults to be reset on restart.

Hope that helps and points you in the right direction.

Read other 3 answers
RELEVANCY SCORE 44.4

I have 2 Hotmail and one Hotpop account configured on OE6. I can send mail through Hotpop with no problems, however, when I try to send one through either Hotmail account I get the following message ... "The server does not support the required HTTP methods ... Response: 'Method Not Allowed' ... Error No. 0x800CCC35."

I have no doubt it's something I've messed around with as I've just reformatted and am still trying to get my settings correct with XP. Does anyone know how to restore default settings to OE6?

Thanks,

Rob.
 

A:Restoring default settings OE6

Read other 16 answers
RELEVANCY SCORE 44.4

When I open Word, the settings are for Calibri (Body) 11 point font, and Multiple Line Spacing at 1.15. I change the settings to the ones I want - Times New Roman at 12 point font and single line spacing. I push the "default" button, which tells me that the change will affect all new documents using the NORMAL template, which is what I want to happen, so I click yes. Notwithstanding that, the next time I open Word to create a new document, it is back to the Calibri/Multiple Line Spacing setting. Can anyone advise how I can make my preferred setting the permanent default setting? Thanks.
 

A:Need Help With Word Default Settings

What version of Word are you running?
 

Read other 3 answers
RELEVANCY SCORE 44.4

one of my children changed all of my display settings individually,IE:colors,font and size.is there any way to reset windows default display settings?

A:Default Display Settings

In Desktop>Properties>Appearance, if you have the XP style selected, switch to a different color scheme, click apply, then go back to the original and apply again. That should set most if not all back to default. A system restore would also work; just pick the most recent date before they changed things.

Read other 1 answers
RELEVANCY SCORE 44.4

I am trying to change the present default setting for my e-mail from Outlook Express to Microsoft Outlook, but i am not able to find the right procedure.I am using a fully updated Win XP. Can anyone help?
Thanks
John.
 

A:Change Default Settings

When you open one or the other you should be told that it's not your default, and given the opportunity to change it.
 

Read other 1 answers