Over 1 million tech questions and answers.

serious error on startup

Q: serious error on startup

so, let me start from the beggining of my troubles. I booted up my pc this afternoon and low and behold the post screen tells me there is a corrupt file in system/system32/system. so i go to repair and that all goes fine(bar me not having one of the files but i'm sure this wasnt critical. Now when i rebooted from the repair install of XP it goes to ther screen saying choose the config as there appeared to be a problem. so i chose normally and it goes to the perfectly normal windows XP loading screen. All looks good. Then, and this is where i cannot tell exaclty what happens as it happens so fast, but i think i get the blue screen of death and then, within a flash it has gone, not even long enough for me to read it, and the computer restarts. Odly though it works fine in safe mode and all my programs are still intact and i can run fine, bar disabled functionality, in safe mode. If anyone would like my computer spec if this will help diagnose the error, or if anyone can suggest why i may be getting this blue screen then i would be very grateful. Thanks,

A very irritiated and worried computer user.

Preferred Solution: serious error on startup

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: serious error on startup

I had a similar problem on my laptop, i took both RAM sticks out and resat them again, and the same with the hard drive, rebooted and it worked fine, give that a shot.

Read other 10 answers

so everything was fine when my laptop started to become very slow and i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.

then i researched and found out that there is some problem with the windows service pack 1 and some daemon tools driver sptd.sys is also involved or something so i uninstalled daemon tools as well as windows 7 service pack 1 from control panel .

now the system is back to its normal speed once it starts up fully , and unless i switch it off there is no problem , but when i restart the system it takes at least half an hour to start up sometimes more than that , sometimes it never starts and i see the BSOD after the welcome screen with error 0x000000f4 and the physical memory dump fails with error 0xc0000010 .

i had also found something about minidump files which i didnt understand anything about , but i still tried to find the folder but i couldnt find the minidump folder in c:/windows/ so i figured maybe i didnt have a minidump folder.

any help would be really appreciated , and if you decide to help please do so thinki... Read more

A:BSOD on startup , error 0x000000f4 . startup takes half an hour

With the required information we can give you the best possible help.

Read other 7 answers

Hi guys I was cleaning my laptop turned it on and it just wouldn't work so I turned it off and on again and it was giving me this error code saying my keyboard is not detected in start up. It then says there was a problem and shoots me to startup repair where it's just stuck not doing anything. My mouse and keyboard don't work, but I have a wireless mouse that I can use I can't access safe mode either because my keyboard doesn't work and I don't know if I can get a keyboard hooked up since my computer might not be able to recognize it. Sorry for the badly worded paragraph it's really late and I need to go to sleep. How can I solve this problem. Also startup time is really long ( usually 20 seconds) is now 5 min an doesn't even start up some times and I have no recovery disks or anything like that so im really confused what to do
Edit: A quick update, I started my computer in the morning and was not getting error 01010003, and my computer started perfectly fine however my keyboard still isn't working. I think it might be a driver problem, but I can't access Safe Mode... because my keyboard doesn't work. Is the only way of getting the key board to work getting a new keyboard and using that to diagnose the problem through safe mode or?

A:Error 0101003 Keyboard no detected, stuck on startup/startup repair

In this situation, you have to use another keyboard in order to test. I wish you will be luckier than me .... for me it turned out to be a motherboard failure My computer was working normally .... but no USB/PS2 ports were working.

Read other 1 answers

My laptop hasn't been in use for about a few weeks and all of a sudden, I am getting a Windows Error Recovery on Startup. I am given two options: Launch Startup Repair (recommended) and Start Windows Normally. Nothing happens when I try to restart Windows normally -- I only see a black screen. Upon selecting System Recovery, a teal screen pops up with "System Recovery Options" telling me to select a keyboard layout. Then it tells me to select my OS, but it comes up blank, telling me to load drivers for my hard disks. I stopped right there.

I am a little hesitant about using the System Recovery in fear of losing important files. If this is a possibility, I may try to backup my files using an alternate OS, like Ubuntu. Or are my files already long gone? Is this just a restore for important Windows files or a complete restore of Windows back to factory settings?

I have not installed any new software or devices. Running Windows Vista x64.

A:Windows Startup Error - System Recovery Launch Startup Repair

Definitely try to backup your files before doing anything else.

Read other 2 answers

As the title suggests, my Acer Aspire has been running startup repair for over 20 hours following a BSOD yesterday. I'm not sure if it's worth the wait so maybe you all can shed some light. Yesterday I was stressfully trying to search for something (using Chrome) and the website I was on froze; admittedly I slammed the heels of my hands down on the laptop at that point. The site unfroze after less than 30 seconds, I continued using my laptop without incident, then let it hibernate for about an hour. Started up fine after that, and at that point I was beginning to rip a DVD (one that I owned; I just wanted the files on my computer) using a program that I've used successfully in the past, but the rip failed. So I began using VLC instead, and hadn't actually started ripping any files when my laptop froze. I had been trying to point to a file path for saving but hadn't saved anything. The laptop was completely unresponsive after several minutes, so I hit the power key to restart, which is when I got the BSOD. It flashed too quickly for me to read or remember anything other than the word KERNEL. I've been wracking my brain trying to remember if it said kernel error or kernel memory error or what.

After the BSOD I had the option to start normally or in startup repair; I hit "start windows normally" but it went to repair anyway. It was on the grey screen with the cursor but I thought it had frozen again, so I did another hard restart. No BSOD this time, but again the opti... Read more

A:BSOD on startup, unknown error, startup repair running too long

Bump...how can I tell if the startup repair is working?

Read other 2 answers

This message now appears on an otherwise excellent computer.

Cannot connect to wireless broadband (I'm doing this on my Equium P200D)

Any ideas. I've tried the Toshiba help to no avail.

A:Qosmio E10 CFSServ Listen Error & Recv InitConnect Error appears on startup


Someone wrote in this forum that the CFSServ is part of ConfigFree utility.
Remove ConfigFree application from the system and try to use and configure your WLan again or try to use the LAN connectivity!

Check it out

Read other 1 answers

Hi to all,

Around 5 days ago, some sort of error, cropped up while installation of Kaspersky Anti Virus on my laptop, and after that everytime, I turned the system on, I faced the blue screen error.

Then, i formatted my laptop and reinstalled Windows XP. It was running fine for two days. Suddenly, it started giving error "Logonui.exe application error" at startup displaying something similar to "The instruction at '0x0037149c' referenced memory" something.. It had to buttons - Cancel (for debugging) and Ok.. I pressed cancel/ok/close button. It always cropped up. Until after a series of pressing buttons, my log on screen came. After logging in, all my icons and taskbar gone. So, i opened Windows Task Manager and run "explorer.exe". After everything came up, Some Data Execution Prevention error cropped up. Whenever i tried clicking "Close Message", it always came up again with a separate window for the "Send Error Report to Microsoft" dialog box.

Whenever I connected to internet, the link under my Internet started blinking very fast. I even left it without any internet application open, but it still went on. I saw the properties window of my connection. It went on and on. And in return, everything went slow. Internet surfing and downloading. And one major problem occurred that, whenever I leave my internet open for a short while, it shows the blue screen of error and restarts.

I thought of formatting every drive ... Read more

A:Logonui.exe error at startup, dvd-rom not burning discs, blue screen error and more.

Hello and Welcome to TSF. I suspect you are infected with Virut.

Please go to: VirusTotalOn the page you'll find a Browse button.
Next to the Browse button you'll see a box to enter text.
Please copy/paste the following bolded text into the box:


Then click the Send File button just below.
This will scan the file. Please be patient.
If you get a message saying File has already been analysed: click Reanalyse file now
Once scanned, copy and paste the URL from your browser address bar in your next reply.
Please repeat for the following files:



Read other 4 answers

Here's my story:

My sister's PC had been corrupted in lots of unnecessary programs and apps.
I deleted those craps. Windows Action Center then prompts me to update my windows, and I did.
PC restarted and POOF!!!, I am seem to be forever stuck in the Startup Repair Loop.
So I tried System Restore, but it's giving me the error code stated above (error 0x80070003).
I also tried System Image Recovery, and it's not also of help. Also, checking Hardware Options didn't help.
Lastly, I tried the Command Prompt option and it gives me nothing.

So how can I possible fix this error? ((

thanks in advance for those helpful respondents ))

A:Startup Repair Error (Forever Loop) Error Code 0x80070003

Hello Cath, and welcome to Seven Forums.

You might see if the tutorial below may be able to help with this.

Startup Repair Infinite Loop Recovery

Hope this helps,

Read other 2 answers

This is a family member's laptop. It is a Dell Inspirion N4110 running Win 7 Home Premium x64
They gave it to me complaining that the shutdown button restarts the computer and will not actually shut it down.
So I checked its preferences, they were fine. I went into the registry and changed the value from 1 to 0. That didn't work. (I changed it back)

I noticed on start up there is an error (it still pops up) that says there was a problem starting c:\users\blah\AppData\Roaming\homsp.dll The specified module could not be found.

The I decided to run a virus scan. Their McAfee had expired so I uninstalled it along with some odd software from a company called SysTweak or something and installed AVG and Malware Bytes. Those full scans came back clean except AVG found something and removed it but it wasn't of any significance to this issue.

I decided to check Windows Update, it wouldn't run. So I tried to restart it in Services and it wasn't there. After some piddling I found a program that supposedly fixed the problem for you. It was called Fix WU. I got it Softpedia. After running it the Windows Update service was back. I was able to install some updates and thought all was well. Then there were more updates. I tried to install them and got an error 80246008.

So I then realized BITS wasn't listed in the Services, either. I found a download (? [SOLUTION] Windows Update and BITS services missing) that contained reg files for Windows 7, installed it, ran the bits file and then res... Read more

A:Update error 80246008, Restart on Shutdown, dll startup error

I'm in no way a expert on such things but I did notice something you found.

Their is no way of knowing all the things a program like that has done. If I had to repair this computer I would start with a repair install.

Give this a good read.

Repair Install

Then I would install MSE for a anti virus and use the built in Windows Firewall.


Little note: If you didn't use McAfee's online removal tool their could of been left overs of McAfee on the computer when you installed AVG and that would be just more problems.
Any anti virus program you remove I recommend using their own removal tool found online.

Read other 3 answers

I am having problems with my computer starting in safe mode all the time. I have tried going into msdos and putting in boot 0 and changing read only stuff back again but to no avail.(ie) brindle 10-20-03.. help! I must have changed something some where eh? Also I keep getting these error mess. more and more. I have aim and just recently it started giving me mss about that and if I don't catch the pop up window that comes with aim, in time then my puter freezes on me and I have to shut down and go in again.. Also....... I am still getting the start up mess of a file is missing and to delete and uninstall etc etc then it has Mcaffee system ini etc etc ,...Well I went and deleted all Mcaffee stuff as recomemned by styxx and am still getting this at start up? HELP I am ready to throw this out the window... no pun intended! My husband thinks I have ruined his computer and is still giving me dirty looks..... I have windows 98se. 254 mgbytes memory, I think,and have dsl...Help

A:safe mode and startup error and error messages

Have you tried going into set-up and resetting all controls to "default setting"?

You're computer is most likely going into default mode because there is something else wrong with it.

You most likely haven't ruined it........jus need to take this one step at a time

What were the first error messages you were getting?

What happened the first time your computer started in safe mode all by itself?

Read other 1 answers

The rest fo the error message says- "Failed to read configuration file. Please contact system administrator"
I have just R and R'd Firefox and I'm still getting this error message. It won't run now and now I see just how horrible IE is in XP,since I'm forced to use it now....sob
Please Help!!

A:Firefox won't startup-Error message says "Configuration error"

Only an idea!!!!  Not sure but it may be the newer FF may not run well on XP, you could experiment by down loading and older version.
Just checked I may be right check the link below!

Read other 7 answers

Hey Everyone,

Please help! I recently let my roomate use my desktop - and now my computer seems to be dying.

Upon startup I get the following 3 errors:

RUNDLL: Error loading C:\WINDOWS\ociganis.dll
RUNDLL: Error loading C:\WINDOWS\dshtpras.dll
hpqthb08.exe - Common Language Runtime Debugging Services: Application has generated an exception that could not be handled. Process id=0xfa0 (4000), Thread id=0xfa4 (4004). Click OK to terminate the application. Click CANCEL to debug the application.

ALSO - Most importantly... my internet is not working! I've gone into the settings and changed everything back to default, but still no luck.

Any help?

A:RUNDLL Error & hpqthb08.exe Error at startup - No internet

welcome! I know that hp one is from hp imaging programs that install with a scanner or camera or something. Try uninstalling that and let us know what happens.

Read other 3 answers

After installing win7 64bit home premium I cannot rum Macrium Reflect (free).
On startup of MR I get this msg:

Problem signature:
Problem Event Name: BEX64
Application Name: Reflect.exe
Application Version: 5.3.7109.0
Application Timestamp: 53ccfa37
Fault Module Name: StackHash_511e
Fault Module Version:
Fault Module Timestamp: 00000000
Exception Offset: 0000000171af0000
Exception Code: c0000005
Exception Data: 0000000000000008
OS Version: 6.1.7601.
Locale ID: 1033
Additional Information 1: 511e
Additional Information 2: 511ea21ce31ca5b9d66e08a72b3f15b4
Additional Information 3: 41bf
Additional Information 4: 41bf1755a6f43c010a107e904eb3c9eb

Searching MR forum the only lead I got was Win VSS. (MR won't let free users register for forums)
VSS is autostart and running. I re-registered VSS componentsand that didn't work.
Any ideas or help?

A:Macrium Reflect error BEX64 (Win error?) on MR startup

Try to start clean boot Troubleshoot Application Conflicts by Performing a Clean Startup
Same problem?

Read other 3 answers

Quote: Originally Posted by Kaktussoft

Try to start clean boot Troubleshoot Application Conflicts by Performing a Clean Startup
Same problem?

I'm having same problem, but this solution didn't work for me.

VSS is autostart and running.

I've been running Macrium Reflect (free) for months on this system with no problem, but seem to remember it updated a few days ago.

Any other ideas?

BTW, I notice this thread is marked 'solved' so should I open a new thread?

Thanks, J.

A:Macrium Reflect error BEX64 (Win error?) on MR startup


This problem got solve with update of macrium reflect few days after this problem started. But again few days ago got other next update from macrium and now same problem happen again.

Think I'll change to Comodo backup, its free too.

Read other 1 answers


I have read a lot of helpful information on this site, so for that I want to say thanks!

I am struggling to fix the error that I get upon startup on my Toshiba Satellite L655 which Reads"

Error in C:\Users\(my name)\AppData\Roaming\actxprxy1.dll
Missing entry:Igwq

I just realized that this isn't referencing actxprxy.dll - it has a "1" stuck in there which is raising a red flag for me and may be why all my google searches come up empty.

I have updated windows, which I didn't update currently because I keep it up to date, I have run Microsoft Malicious Software Removal Tool which found nothing, I have run Malwarebytes which found nothing I have of course run my current anti-virus, malware, registry cleaner software and it says all is good too. Nothing is running poorly on my computer but I am starting to think that there was something that happened and my computer was able to remove it but maybe not all of it or there are damaged files from it? I am not super computer saavy but I do pretty well and can definately can follow good directions. I would really appreciate any help with this that anyone can provide!


A:Error upon Startup, "Error in C:\Users\....\actxprxy1.dll


Is there a actxprxy.dll present?

Is there an error in your event logs? When does the error display?

Read other 9 answers

When i startup my computer an error appears

(Name Of Box)MOM.EXE - .NET Framework Initialization Error
(Red circle with X) Unable to find a version of the runtime to run this application.
[ OK ] Button

The picture on the task bar is the ATI logo and says ATI. I looked up MOM.exe and knew it has something to do with ATI, i have tried uninstalling and reinstalling my ATI drivers, didnt fix the problem.

I was having a problem before where I had a similar error at startup. The name of the box was MOM.EXE, and it said it couldnt run the problem if i remember right.

Im both cases i can click the OK button and the error doesnt come up again until i restart my computer.

I am using Windows XP Home.

Thanks in advance for the help.

A:At Startup Error: Mom.exe - .net Framework Initialization Error

This error may be a result of the .NET Framework either not being installed or the installation is corrupt. Go Start > Control Panel > Add/Remove Programs and make sure the Show Updates box at the top is checked. Then search for an entry called:Microsoft .NET Framework 2.0If it is there remove it (don't worry if it is not there). Then go to this site and download a fresh copy of it. Install it, reboot and then see if your problem has been solved.

Read other 16 answers

Hi. I am currently using windows xp professional and on startup, i get these two annoying messages:

Error loading C:\WINDOWS\xccdf16_080906a.dll
The specified module cannot be found

Error loading C:\WINDOWS\xccdf16_080906a.dll
The specified module cannot be found

These messages are very annoying and i would like to get rid of them.
Here is my hijackthis log:

Logfile of HijackThis v1.99.1
Scan saved at 12:06:33 PM, on 10/Sep/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)

Running processes:
C:\Program Files\Common Files\Acronis\Schedule2\schedul2.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\IVT Corporation\BlueSoleil\BTNtService.exe
C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
C:\Program Files\Common Files\Acronis\Fomatik\TrueImageTryStartService.exe
C:\Program Files\VMware\VMware Workstation\vmware-authd.exe
C:\Program Files\Common Files\VMware\VMware Virtual Image Editing\vmount2.exe
C:\WINDOWS\system32... Read more

A:RUNDLL Error on startup, error loading

Read other 15 answers

Windows vista enterprise edition on start up shows an error rundll32.exe,
error message saying "windows cannot access the specified device,path,or file. You may not have the appropriate permissions to access the item

A:Rundll32.exe error on startup error message saying "windows cannot access the specified device,path,or file. You may not have the appropriate permissions to access the item

Please click start, type msconfig and press Enter.
Under the startup tab, find the item reads like RUNDLL32.EXE, c:\windows\system32\xxx.dll and uncheck it.
Save the change and restart.
Or you can modify the registry by loading registry editor.
Navigate to HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Deleted the RUNDLL32.EXE, c:\windows\system32\xxx.dll
Regards,Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 3 answers

When the machine would normally be going to the Windows startup screen, instead it shows two lines of print separated by a blank line, white print on a black screen:

Boot error: 0-00

Select partition to boot, 0-3:_

the underline at the end of the second line is a flashing cursor. It remains with this showing until I enter any character, and hit 'RETURN', whereupon the normal boot process resumes. It doesn't matter if I enter one of the four requested digits or something else, any character will do. While this seems simple enough, it worries me - I don't like partition problems, especially since I'v seen Windows 7 repeatedly simultaneously convert normal partitions on up to three drives at once into completely unreadable garbage that no partitioning software can read. While there seems to be no consequence from this behavior, I've become very skittish since witnessing what Win 7 can so completely foul up. I've had this boot error before, and the only thing that removed it was completely repartitioning and reformatting the drive involved. Does any body recognise this? I've been working on and in computer systems since they were called 'numerical calculators', back in the fifties, and I've never seen this until two years ago. Both times I've seen this start, it's begun at startup from a cold boot, after a long series of drive changes, otherwise I know of no other common factor. I know I'm getting old and stodgy, but I really don't like this. The error stays with the driv... Read more

A:Startup error 'Boot error:0-00'

Just out of curiosity have you run a malware scan with malwarebytes?

Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.

Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

Read other 4 answers

Today I got my new laptop and decided to dual boot Ubuntu and Windows 7 on it. After several hours of partitioning and researching, I ran into many issues. Eventually I decided to boot Ubuntu from a USB drive, open up Gparted, and delete any and all Linux partitions while expanding the size of the Windows partition back to normal.

Unfortunately, in the process, I must have made an error, because now upon startup I get the "bootmgr is missing" error. I don't have a recovery CD nor does my laptop have a CD drive, so that's out of the question, but I know for a fact my Hard Drive has a recovery partition on it. I want to restore my computer back to normal, keeping my old files if necessary. However, since I just got the computer today, I clearly don't have anything on there I can't afford to lose, so if I must do a factory reset I will.

A:"Bootmgr is missing" error upon startup, caused by human error

Welcome to the forum,

Sounds like quite a mess, you can try Bootmgr is missing - Fix

Since you don't have an optical drive you can USB Windows 7 Installation Key Drive - Create

Since you need a repair disc or an install disc to do that you'll want to create one

With the installer ISO for your licensed version here Official Windows 7 SP1 ISO from Digital River ? My Digital Life

You may just want to get a superior clean reinstall using the COA key on your computer,

Clean Reinstall - Factory OEM Windows 7

Read other 7 answers

Recently I've been getting a blue screen when I start windows. It occurs randomly (sometimes computer starts fine) and I can't seem to fix it. The following text is at the bottom:

STOP: 0x000000C5 (0xE1A7F000, 0x00000002, 0x00000001, 0x805448E9)

The error screen also states I should go into the BIOS and disable shadowing. Since I have no idea what this is, I'd rather not mess with BIOS settings. Also, in the Event Viewer I found error entries with this:

The following boot-start or system-start driver(s) failed to load:

The computer is a new Gateway CX2610 Convertable Laptop. Microsoft Windows XP Tablet PC Edition 2005 Version 2002 Service Pack 2.
Intel(R) Pentium(R) M processor 1.73GHz 512 MB RAM.

Any help would be appreciated, this is annoying me.

A:XP Startup Error

You should be able to boot to your recovery CD and do a repair install. What I am seeing here is a lot of system driver corruption (IDE channel, AGP channel, etc.)

Read other 15 answers

When I try to start up the computer, everything works until after the XP logo loading screen. After that, there's a long long black screen that eventually turns into a blue error screen that says "driver_irql_not_less_or_equal". I have no clue whats going on. All I did yesterday was install battlefield 2 and spill a bit of water on my keyboard. Could either of those things have caused this?

Any help is extremely appreciated, I just got FEAR and want to play it quite badly.

A:XP Startup Error

Read other 16 answers

I am having trouble removing an error i receive on startup. The message reads as follows:
"Error loading C:\PROGRA~2\Kodak\EasyShareSetup\$REGIS~1\Registation_7.4.20.2.sxt The specified module could not be found".

I had a similar problem on my old computer which i sorted easily as i used msconfig to remove useless files on startup. This one however i cannot find on Vista OS and have had no luck searching through regedit. I have also tried programs such as Register Cleaner for Vista and Ad-aware 2007. As far as i know i cannot see what is trying to open this non-existent file relating to Kodak EasyShare which i uninstalled a few days ago. Please help.

A:run.dll error on startup

Read other 6 answers

I have been having a lot of issues with my computer today. First, it froze up on me, so I had to restart it. After I restarted my computer, the Windows load screen comes up, but after it goes away it just gives me a black screen. No login screen or anything. So, I just restart again, and the same thing happens. Now when I try to restart it brings me to a screen that says exactly this "American Megatrends. AMD Athlon(tm) XP 2700+. Checking NVRAM.." Is there anything that I can do to get this to stop? Has my hard drive been "wiped" and have I lost all my files?

Any help or suggestions would be greatly appreciated.
Thank you.

A:Startup Error - Help please


Switch on and constantly tap f8.
When you get presented with the options try "Last Known Good Configuration".

If this fails .....can you boot up in Safe Mode from the same list of options?

Read other 3 answers

I am running xp pro with sp2. Everytime I get "error loading C:\windows\system32\sprt_ads.dll acess is denied" when my computer starts up and loads to the point where you start using windows. I can click ok and it goes away and everything works as it is supposed to. I go to msconfig and on the startup tab it is checked for loading at startup. The line is "sprt_ads C:\windows\system HKLM\Microsoft\Software\Windows\CurrentVer..
I can uncheck it and click apply and reboot but it comes up saying the same thing when I get to my desktop. I looked in system32 folder but there is no file sprt_ads.dll. I tried starting up in safemode but the error message still comes up. I unchecked all startup items in msconfig and rebooted but it comes up again at startup and when i go back to msconfig, it is checked again. What program uses this so I can take care of this problem? Thanks in advance for any help you can give.

A:Startup Error

This usually associated with a Rogue Spyware program such as IEDefender. They usually bring on Popup ads to entice you into buy said program or others. Are you having Popups?Please follow these instructions How to remove the Smitfraud / Generic Zlob Then do this: Download Attribune's ATF Cleaner and then SUPERAntiSpyware, Free Home Version. Save both to desktop .. DO NOT run yet.Open SUPER from icon and install and Update itUnder Scanner Options make sure the following are checked (leave all others unchecked):Close browsers before scanning.Scan for tracking cookies.Terminate memory threats before quarantining.Click the "Close" button to leave the control center screen and exit the program. DO NOT run yet.Now reboot into Safe Mode: How to start Windows in Safe ModeDouble-click ATF-Cleaner.exe to run the program.Under Main "Select Files to Delete" choose: Select All.Click the Empty Selected button.If you use Firefox browser click Firefox at the top and choose: Select AllClick the Empty Selected button.If you would like to keep your saved passwords, please click No at the prompt.If you use Opera browser click Opera at the top and choose: Select AllClick the Empty Selected button.If you would like to keep your saved passwords, please click No at the prompt.Click Exit on the Main menu to close the program.NOW Scan with SUPEROpen from the desktop icon or the program Files listOn the left, make sure you check C:\Fixed Drive.Perform a Complete scan. After scan,Verify they are all ch... Read more

Read other 3 answers

when i reboot my computer i get a error message saying that 00000575 rbf. file cannot be found, how can i fix this?

A:rbf. startup error

click on start run then type msconfig if you have windows xp that is on the startup tab uncheck anything with rbf

Read other 1 answers

After I have logged in to my laptop and the desktop comes I get an error message that says

" Could not load or run 'C:\Windows\service.exe specified in the registry. Make sure the file exists on your computer or remove the reference to it in the registry. "

I have tried CCleaner and have had a look through the Registry bu I can't seem to find what is causing the problem.

Any suggestions or fixes will be greatly appreciated.


A:Startup Error

D/l , install, update and scan with the free version of:


Read other 4 answers

Hi All,

I have a laptop with Windows 7 on it. When i am trying to boot it, I am getting startup error. I ran startup repair couple of time and still it is not loggin.
After last startup repair a different message has came as"SMART Failure is predicted, please back up your data immedately.... etc. Press F1 to continue".
When i am pressing F1 to continue it is giving me two option
1) Start Window Repair.
2) Start Windows Normally.
I tried to execute both options but for both option it goes to same screen which says, insert the installation disk and start the repair.
I have some critical data which i want to backup before anything go wrong. Please help me by suggesting the ways to boot my laptop so that i can take the data back up.
Thanks in advance

A:Win 7 Startup Error

Use Ubuntu Live CD to Backup Files from Your Dead Windows Computer - How-To Geek

I have helped many and this, so far, has never failed.

Read other 2 answers

When i started my system just now it took 3 attempts before it actually started without this error -

It said on the startup screen USB device over current status detected will switch off in 15 seconds?

It keeps happening now!


Windows 7

Read other answers

I was messing around with the ip address of my computer because the internet didnt work. then i deleted and installed fresh winsock entries.

i restarted the computer and i got a error.
and the technical information is:

*** STOP: 0x00000050 (0xFFFFFFE8, 0x00000001, 0x804d9044, 0x00000000)

here is what i found on a google search:
by reading it, i find that that error comes up when a new hardware or software was installed that was bad. i think thats what happened when i did the winsock entries.i can boot up in safe mode, i found the newest winsock entries and installed them and that didnt work
Please Help


A:startup error

Please, Anyone

Read other 2 answers

hi all,

I'm getting this error each time on startup... tried to look for it but havent found anything.

anyone know how to solve this?

many thanks!

A:.DLL error on startup

Read other 11 answers

Ok, I had Window Xp and Ubuntu. I wanted to get rid of ubuntu, so in windows XP, under computer management and disk management, I right clicked and deleted the partition. Then I created a new logical drive. However, when I restarted my computer, it says: "Verifying DMI Pool Data.............. GRUB Loading stage1.5. GRUB Loading, please wait... Error 17" And now I can't start up Windows XP anymore!

Anything I can do?

A:Startup error 17


Deleting the Ubuntu partition deleted the GRUB bootloader, which gives error 17. To fix it, you need to rewrite the MBR so that it no longer contains GRUB.

You will need an XP CD to do this. Boot from the CD, and at the first screen, press R to enter recovery console.

It will then ask you which install you want to log on to. Type in 1 and press enter. You may then need to enter the administrator password (Blank by default)

Now type in fixmbr and press enter. It will give you a warning about a possible loss of data, press Y to continue.

Then type exit to restart the PC.

Hope this helps you

Read other 4 answers

Hi NEED HELP when i startup my computer after a bit it says "remove diskette or other media. press any key to restart." I have nothing in my CD drives and i dont have a floppy drive. If anyone can help please do so thanks heaps.

A:startup error


please stick with this thread
no need to start multiple threads

I have removed your other two


Read other 1 answers

Hi, i replaced my original wifi module with Intel Centrino Advanced-N 6230 and now i get the error 702 when computer starts. The new module should be compatible with my computer (based on specification document http://h10032.www1.hp.com/ctg/Manual/c02842252), so where could be the problem? Thanks for your help. Martin

A:Startup error 702

@palikm Did you order HP part number    631956-001   ??? REO

Read other 1 answers

i am using a win vista operating system in my laptop
i dont know how i get RunDLL errors....
these are the errors with subject of "specific module could not found"



please help me to remove this erros

and i want to remove expired norton antivirus from my system, so how can i remove it?????

wait for reply!!!!

A:startup dll error ............

Go to control panel then click on add remove programs and uninstall norton.

Read other 1 answers

The following message displays on Startup on my computer:

"Error Loading
The specified module could not be found."

There has been no affect on the computer, is it important? Should I ignore it? Or how do I go about fixing it?


A:Error on startup

Hi fbreen722 and welcome to TSF !

There's not a single hit on google about that uukumv.dll file, I guess it's a randomly named file and those are usually related to malware. The file being missing probably means your antivirus caught it and deleted the file but the infection left remnants in the registry (the system is still trying to load the file at startup).

I suggest that you follow these steps to get rid of any remnants :

Read other 3 answers

i am using a win vista operating system in my laptop
i dont know how i get RunDLL errors....
these are the errors with subject of "specific module could not found"



please help me to remove this erros

and i want to remove expired norton antivirus from my system, so how can i remove it?????

wait for reply!!!!

Read other answers

I was on my cmputer, listening to music, when it just shutdown. Upon restarting it, I get the error code 0xc0000034. I tried my Vistata installation disc, but that didn't help. So now i am stuck.

A:Startup Error


The above article should help you with this issue. I hope this helps.

Read other 2 answers

When I start the computer, I get this message
"ibmpmsvc.exe the exception privileged instruction (0xc0000096) occurred in the application at location 0x0012e78d click on ok to terminate the program click on cancel to debug the program".
How can this be fixed?

A:Help, please with startup error...

Hello drm1101 and welcome to the forum,

The process ibmpmsvc.exe is a power management driver for IBM laptops. It provides support for the use of four keys on the thinkpad keyboard with blue key tops - Fn, F3, F4 and F12 - which have specific functions to control the standby and hibernate buttons. It isn't required if you don't plan to go into standy or hibernate modes.

The only solution I have seen is to go tothis site and try the latest version of the power management driver:


Good luck,


Read other 1 answers

when i turned on my pc i got one of those "send-dont send" winodws and on error details i got this:


is it anything bad?

A:Error during startup

Well it is only inside the temp files.
Clean out your temporary internet files.
Control panel>Internet options
Delete temp files> all offline files box NEEDS CHECKED
hit ok and then restart and see if it comes up again

Read other 1 answers

The error on startup that i am receiving is

_VWUPSRV.EXE Has encountered a problem an need to shut down.Sorry for any inconveniance.Im running windows xp home.

Asus P4C800-E deluxe
2X 80G HD'S in RAID 0
2X 512MB DDR Kingston Dual channel Memory
Geforce 6800 gt OC'd
Soundblaster ZS gamers addition
P4 3.0E Prescott
Antec 550W PSU

A:Error on Startup

Do you have the program AntiVir by any chance?

Read other 1 answers

Hi Everyone,
OS: XP home. When I start up my computer I get this message:

'Error loading C:/program files/wildtangent/apps/cda/cdaengine0400.dll
the specific module could not be found.'

I've run ad-aware and spybot...no luck. Any advice? Thanks.

A:startup error

Read other 16 answers

This problem had been addressed 4 years ago in this thread (MBR Error 1 on startup), but the conditions are now different.

I have a Toshiba Satellite A300 laptop, upgraded with Kingston 120GB SSD and 300GB Hitachi HD in a CDROM craddle, running Win7. From the moment I installed the SSD and moved the HD to CDROM craddle, when I power on from Hibernate state, the BIOS message "MBR Error 1" appeared on screen. Thereafter it booted after soft reset (Cntr-Alt-Del), that is the message appears after first powerup reset only. Curiously when I remove the CDROM craddle with the HD, laptop boot OK from Hibernate, without error. Problem was bypassed by not using hibernate at all, since laptop had fast boot time with SSD.

Recently I upgraded to Windows 10 and the same "MBR Error 1" appears now always at first powerup and is bypassed by soft reset, regardless it was powered down or hibernated.

In both cases changing boot order in BIOS didn't help, since error always reappears.

Any suggestions??????

A:MBR Error 1 on startup again

Hello and welcome mate now two things I can think of straight away is a) what is set in the BIOS as first boot device? My old Toshiba here always goes looking in the optical slot even when first boot is set to the hard drive - b) if you are running 10 then it maybe worth a try in that forum (see top of page same folks same sign up as here in 7)

Now it could also be an issue with the upgrade too - not sure but it is an older machine and thereby maybe not support 10 as well as dedicated machines are.

Read other 4 answers

Recently I've begun getting errors on startup.
The error basically opens DOS and then a popup box comes up that says there's an error..it gives this information:


CS:0de3 IP:021f OP:63 6b 67 72 6f

Ive run CCleaner as well as Ascensive PC Speedpro to no avail..the error still happens on startup.

Can someone please guide me through the steps i need to take to resolve this issue?

A:Startup MS Dos error

You should look at what startup programs are running. msconfig, startup tab, might be of help (start, run, msconfig.exe).
I'd also scan 03450843.exe with an antivirus or antispyware program. That's a rather suspicious file name. It's likely a 16-bit program hence the messages you're seeing. It's possibly even buggy (looks like it's crashing), so perhaps you're not getting any payload (+ 16-bit programs may not work entirely on pure 32-bit OSes like NT, 2000, or XP). Scan anyway to be sure.

Read other 2 answers

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at 쥌嗿㗲恧絛↶҉短휘흎흎7.쥌嗿㗲恧絛↶҉短휘흎흎7.NodeSelect(String slctNodes)
at 쥌嗿㗲恧絛↶҉短휘흎흎7.쥌嗿㗲恧絛↶҉短휘흎흎7.Form1_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.Control... Read more

A:Always getting this error on startup

Establish a Clean Boot, run a full scan with Malwarebytes, then SFC /scannow Command, and the other Troubleshooting Steps for Windows 7

Read other 9 answers

A while back I tried installing an old scanner on my laptop but it didnt work. After uninstalling, everytime I turn on the computer I get the following message:

'Could not load or run F:/CDSETUP.EXE specified in the registry. Make sure the file exists in on the computer or remove the referenece to it in the registry'

I have seached for this on my laptop and found nothing. I entered the registry (Regedit) searched for it, found it and deleted it. After doing so, the message still appears. I'm at my wits end! Someone please help!



Tech Support Guy System Info Utility version
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-60, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 3006 Mb
Graphics Card: NVIDIA GeForce 7150M / nForce 630M, 64 Mb
Hard Drives: C: Total - 226274 MB, Free - 24514 MB; D: Total - 12197 MB, Free - 1891 MB;
Motherboard: Quanta, 30D1, 85.24, None1
Antivirus: ESET NOD32 antivirus system 2.70, Updated: No, On-Demand Scanner: Enabled

A:Error on startup

Sometimes, there are more than 1 entry for a file in the registry. Go search again.

Read other 3 answers