Over 1 million tech questions and answers.

Monoprice 6814 Drawing Tablet Stops Working

Q: Monoprice 6814 Drawing Tablet Stops Working

I have literally tried every single thing I can think of. I've had two computer technicians try different things, I've contacted Monoprice support, and nothing is working.


I recently (within the last week) bought a Monoprice MP1060-HA60 (PID 6814) graphics drawing tablet. The pressure sensitivity works but after an undetermined amount of time (can be anywhere from a few seconds to 10 minutes) the tablet stops controlling the mouse. The light on the tablet still lights up when the pen makes contact. I'm wondering if anyone else in the community has had this issue and found something that works?

I've tried the following:
- Installing the drivers from the CD. Uninstalled and reinstalled several times.
- Installing the drivers from the website. Uninstalled and reinstalled several times. There are two versions.

- Installing the Legacy drivers from the UC-Logic website (this worked for a few seconds before causing the tablet to freeze.) Uninstalled and reinstalled several times.
- Installing Photoshop CC 32-bit (since I run a 64-bit system.) Nope.
- Installed an older version of Photoshop (CS6). Works for a few minutes before stopping.

- Tried running Photoshop 64-bit and 32-bit both in compatibility mode with the tablet. Nope.
- Tried messing with all of the settings, nope.
- If I go into Brush Preferences > Shape Dynamics, there is an exclamation mark by the "pressure sensitivity" setting saying that Photoshop needs a pressure-sensitive tablet in order for that to work.

Any help would be greatly appreciated. I'm at my wit's end. D: I'm just wondering if this sounds more like a defective tablet or if something is going funny with the drivers in Windows 7.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Monoprice 6814 Drawing Tablet Stops Working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 91.6

I have to unplug and plug it back in several times before I can get the buttons to work. It takes even longer for the pen to work, and when it does it's only detected when I push down full strength. It's seldom detected when lightly pressing or hovering above the tablet screen, like it should and used to. I don't know what's wrong with this damn tablet, it used to work PERFECTLY. Then one day it stopped, and I've been having problems since. The last time I could draw something was about a month ago, and I even had (less severe) issues w it back then. This is just so frustrating.

Here is my tablet

I have the latest (v9.0, July 2014) drivers installed from the description of this specific tablet.

I am not terrible w technology, especially when I have instructions. Usually I can figure out problems myself. I guess I'm better at messing w mobile devices...
EDIT: When the pen does work and pressure sensitivity is detected, it doesn't lasy long. Whenever I try to draw in Paint Tool SAI it's verry jittery and lags quite a bit before stopping altogether.

A:Monoprice graphics tablet not working properly

Bump

Read other 2 answers
RELEVANCY SCORE 79.6

Hi Lenovo community, I just got a drawing tablet. It's a HUION Kamvas (like a Wacom Cintiq). It connects via USB for tablet functionality (perhaps the Kamvas output) and HDMI cable for the graphics screen function to turn on. I can't get the tablet to project the Yoga laptop screen or get a dual screen. In the settings under "display", I couldn't get the tablet to connect via Bluetooth, or in any other discoverable way. I can't fix this through the HUION driver settings or reinstalling it. I've called LENOVO customer support and they said in order for my tablet to work, it needs to be an external monitor. I think the tablet is an external monitor through an HDMI connection. The tablet buttons and pen work alright because of the USB connection, but I bought this for the 'drawing on the tablet screen experience". The pen that I have for the Yoga is alright for quick sketches and notes, but I need the buttons and HUION drawing functionality. All I need to know is if there is a way to get the HDMI to project onto my tablet. Any advice would be helpful since I've out exercised my creative tech support juices! If it's all for not, then oh well, I'll just try another tablet. Thanks!

Read other answers
RELEVANCY SCORE 71.6

Hello Guys,

I'm really conflicted here. and I can't seem to find any answers anywhere....

I don't know whether I should buy an official drawing tablet...or if I should buy this one Android tablet that I've wanted for a long time and just draw on that.

I'm thinking about the Samsung Galaxy Note . And it has some good drawing apps on it and the S pen would be nice... I just wanted to know if anyone else had experience with doing this, and if so, how do you like it?

Of course, I wouldn't use the Samsung tablet just for drawing...but I don't know if I'm willing to buy an actual drawing tablet...I don't know if I'm dedicated enough.

I heard that XP-Pen Deco Pro Drawing Tablet supports connection with Android 6.0 and above devices . Does anybody have experience with it .

https://www.xp-pen.com/product/432.html

Just...what do you think?
 

Read other answers
RELEVANCY SCORE 67.6

Hi there,I have some difficulties with my lenovo X1 keyboard and am not sure if it is a defect. The keyboard often times just stops working. Sometime only the touchpad does not work anymore, sometimes the whole keyboard stops working. I have to detach and reattach the keyboard sometimes several times before it starts working again.What is going on here. Can anybody help me?best regards

Read other answers
RELEVANCY SCORE 66.8

Video used to work fine on my Lenovo 10" tablet. However, now after about 30 seconds of video, I get the error message "Unfortunately, video has stopped"

Please help
 

Read other answers
RELEVANCY SCORE 66.4

Hi,
I got a new Inspiron 15 - 7568. As soon as I flip it into tablet configuration (whether I choose tablet mode or not), touch stops working. Only way to get it to work is to restart the notebook.
When touch is not working, Win 10 reports no touch capability and in Device Manager one USB device has an error "Unknown USB Device (Device Descriptor Request Failed". After the restart everything is in order, until try to get it into tablet configuration.
Already updated, drivers, BIOS etc to the latest on Dell site.
I tried disabling USB selective suspend setting in power management - no change.
Has anyone had the same issue?
Any suggestions before it goes to Dell Support?

A:Inspiron 7568 - Touch stops working when in tablet configuration

I am sorry to read that you are having this problem.  Is this something that has always happened since getting the notebook or something that recently started?  Has anything been changed with the system just prior to when the problem started?
If you haven't tried already please download the 0006, a00 version of the touch firmware from here.  I also suggest installing the chipset and Intel Serial I/O drivers as well.
I will likely shoot you a friend request but please reply here if you have tried the drivers that I mentioned and if it made any difference.
Thanks

TB

Read other 6 answers
RELEVANCY SCORE 65.6

I am looking for a program, preferably freeware, that is similar to Painter Classic. I used to use that program, but flaws in the program have rendered it unusable. Support for pressure sensitivity and the 'eraser' on the stylus would be ideal.

Alex
 

A:Best software for drawing using tablet?

Read other 6 answers
RELEVANCY SCORE 65.6

Hey,

Anyone used one of these before?
http://www.amazon.com/exec/obidos/t..._2/102-0143176-7388138?v=glance&s=electronics

I hear their great, and id like to get one for illustration and logos.

Anyone here have expirience with them?

Stevo
 

A:Wacom Drawing Tablet

Read other 6 answers
RELEVANCY SCORE 64.8

Ok, I'll try to keep this fairly short and understandable...

So I got a new computer thrown together, and upgrade from my last one, and everything has been working fairly well. Ran into a few problems here and there, as there can be with computers built from scratch, but there is this one thing that isn't making any sense to me.

I've been busy re-installing all of the programs that I like to use, like Photoshop CS2, and I am trying to install my Hanvon 5*6 drawing tablet.

Now, I thought everything would be fine and dandy, seeing as all my other USB ports were working just fine, considering that I was able to transfer files from a flash drive and portable hard drive, but when I plugged in my tablet, an annoying bubble keeps popping up over and over and over again saying that the "USB Device is not Recognized" and all this nonsense about the device has malfunctioned.

I know well that my tablet is working just fine, because I plugged it into my brother's computer and it found the tablet like it should and installed it and worked just fine after installing the drivers.... So, why should my computer not recognize the tablet ether?

In short, my computer refuses to recognize my tablet, but it can use other things, like portable hard drives, flash drives, and my keyboard, just fine without complaining, (Note that my tablet fine works on other computers) and I have the tablet drivers installed and everything.

Anyone have a solution to this problem... Read more

A:Computer not recognizing Drawing Tablet

Read other 6 answers
RELEVANCY SCORE 64.8

Hello there

I've recently ran into a really annoying and to me, worrying, situation in which plugging in my drawing tablet to the front USB sockets manages to freeze my PC. Right as I plug it in there's just no response whatsoever. I haven't had that issue before with the same tablet and as far as I know there weren't any driver updates to it (pretty sure I'd have to do that manually anyways). My PC specs are posted below, the tablet is a Huion H420. I thought the issue was with one specific USB port, as they have in the past sometimes (quite randomly I've felt) gotten "overloaded" or something like that, but trying others I just got the same issue and the crashes require hard resets, which I believe I've seen aren't good for the hardware's health, so I'd really like to resolve the issue. I'll gladly provide any info that's needed.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: AMD FX(tm)-6300 Six-Core Processor, AMD64 Family 21 Model 2 Stepping 0
Processor Count: 6
RAM: 8092 Mb
Graphics Card: NVIDIA GeForce GTX 960, -2048 Mb
Hard Drives: C: 931 GB (413 GB Free);
Motherboard: ASUSTeK COMPUTER INC., M5A97 R2.0
Antivirus: Avast Antivirus, Enabled and Updated
 

Read other answers
RELEVANCY SCORE 64.8

I have a fifteen inch XP-Pen Artist 15.6 ( I buy it from https://www.amazon.co.uk/Artist15-6-1920x1080-Graphics-Drawing-Battery-free/dp/B0785682VP ). I want to use it for drawing (love to draw people, nature, animals and sometimes abstract), graphic design and editing photos. I do want to have accuracy. I've read that small would be good because it all depends on the screen size in comparison to the actual tablet, but I've also read that you can get more accuracy with a slightly larger tablet. such as XP-Pen Artist22E ( https://www.amazon.co.uk/Artist22E-Graphic-Interactive-Shortcut-Adjustable/dp/B01M28DHOA )I don't mind moving my hand a bit for accuracy. I've called best buy and all they say I cannot test the tablet, but I can buy it and return it if its not to my liking.

I'd really like to test it out however to choose. I've used small tablets before and recall having to do some zooming in for nice detail on the 15 inch. I no longer have one and would like to find the best fit. I guess I could be leaning toward either whatever is truly the best fit for me. I want to create beautiful works of art and to eventually do it professionally.

Let me know what you think is the best solution in this case. Thank you so much!
 

Read other answers
RELEVANCY SCORE 64.8

Hello everybody, first of all i'm new in this forum and this is my first post and my english is not the best

I recently installed Vista ultimate x64 (previously i used xp sp2 ) because i upgraded to 4gb of ram and xp doesn't recognize more than 3gb of ram.

I'm a digital artist and i heavily use graphic tablet ( Genius MousePen 8x6 ) for drawing in Photoshop CS3. I found x64 drivers for the tablet and i installed them and everything appeared to be ok.

But when i draw for example a simple line, there is a delay to appear the line on screen. I mean delay in miliseconds, but is very annoying and it makes difficult to draw.

In XP this was not happens, the line appeared in real time.

I noticed when i plug the tablet that there is an annoying window called "Tablet PC Input Panel", this could be the problem ? If yes how do i disable it ?

Or perhaps a hardware problem ? my cpu is Core 2 Quad q6600.

Thanx in advance!

A:Problem when drawing with graphic tablet...

Hi neboor!

This is a tough one indeed. However I'd like to present to you the tech support number for the makers of this product. Hopefully they can give you a solution and you can post it here!

Business Hours:
Mon-Fri 10 a.m. - 5 p.m.EST
1-800-756-4115
website is GeniusEshop.com

Raj

Read other 4 answers
RELEVANCY SCORE 64.8

So im kinda in drawing but with mouse its hard . I would liek to use tablet . My tablet is Lenovo B8080 -H.
I would like to controll my pc so if i touch tablets screen it will do as clicking on mouse .
Teamviewer doesnt work because if you slide it moves the screen not draws. Vnc too same thing .
I cant find any software that does something like that . If you have anything to help me pleas post.
My pc is win7 and my tablets android version is 4.4.2.
 

A:Using android tablet as drawing tool .

You can't use an Android table as an input device.
You need to search for a graphics tablet.
Something like this
 

Read other 1 answers
RELEVANCY SCORE 64.8

Alright, so i have this drawing tablet and i dont know what happened but when i plug the coard into the side of the tablet, it doesnt work. I've had the tablet for about a year and i dont know what to do, it looks something inside the tablet but i dont have the technological knowledge to know what im doing with out making things worse. Anyone know how to fix this?
 

Read other answers
RELEVANCY SCORE 64.8

does anyone know what's the best site to get replacement pens for a UC-Logic WP8060 tablet? I began noticing a crack in a pen I'm currently using.
 

Read other answers
RELEVANCY SCORE 64

HELP! I have a really old tablet and a really new computer, and they aren't playing well together. I have a Windows 10 HP desktop computer and a Wacom GD-0912-R tablet with a Serial D9 to USB adapter I bought from Amazon. Everything seemed to be plugging in alright and the little light on the top of the tablet is on, but it won't work. It responds to the pen touching it, but nothing happens onscreen. The newest driver I can find is for Windows 7. Is there a trick to get it to work? PLEASE HELP!
 

A:Help! Windows 10 trouble with a reeeally old drawing tablet!

I think your out of luck on this one. That device was brought to market in 1998 (18yrs ago). There are no drivers for windows 10 and this device. The device is nolonger supported, which means no one will be creating a new device driver. Sorry time to recycle.
 

Read other 2 answers
RELEVANCY SCORE 63.6

Hi there,

I'm not sure if this is a hardware problem or not.
A friend of mine just got a new drawing tablet to replace her old one and she's having a problem now where if she opens a program to work with the tablet, for example Photoshop, the laptop will register the tablet as a mouse. Also Photoshop will sometimes crash on initializing. She has tried other art programs and the tablet is still acting as a mouse in those, so the Photoshop crash issue might not be related.

Sometimes the laptop will recognize the tablet properly, sometimes it won't. She tried reinstalling the tablet's drivers and it worked for a day or two and then started acting funny again. Even after a reboot or two.

Here's all the information I have:

She's using the tablet in the same usb port as the old one, she believes.
The new tablet is a Intuos 2 graphics tablet.
The old tablet I believe was also a Wacom much like the new one. (she still has the old one btw)
She's using a bamboo create pen on the new tablet.
She hasn't tried cleaning her registry yet.
She hasn't tried using the tablet in a different usb port.
Her laptop is an Acer Aspire AS7741Z-4815
All USB ports are reporting to be up to date and functioning fine.
We're thinking it's either the new tablet itself or the usb port it's in. I'm thinking it's not a physical connection issue because the laptop doesn't display a new connection message when the tablet starts ... Read more

Read other answers
RELEVANCY SCORE 63.6

My friend went hunting in the vast savana of my emachines em350 he removed a lot of viruses and my tablet connected once more. But now it doesn't seem to connect anymore. Help please:(
(it's running windows 7 starter)

A:Drawing Tablet wont connect, Is this my drivers or a virus?

It connects via usb and the ports are perfectly fine.

Read other 1 answers
RELEVANCY SCORE 62.8

I just this morning installed my drawing tablet on this computer and I got this error about 5 minutes into using it. That's the short story.

The long story, however, is that this is my 13th BSOD since I installed a new HD into this laptop and reinstalled the version of Win7 I had. The difference is that this BSOD is the first one I've got that's not a 7A error and that's actually created a dumpfile. It's something of a revelation for me, but it doesn't appear to be at all related to the BSODs I've been suffering to date. Basically, I don't think this means that my old BSODs will suddenly be making dumpfiles for me too. I am curious whether there might be something in the attached dumpfile zip that tells me more than just the basics of what caused this particular BSOD and might help explain my others. That's for someone who know what they're looking at to determine though. For now, it would be helpful to get a solution to this specific BSOD and then I can work on the BSODs that have been bothering me until now.

Here's a link to my original thread addressing all the BSODs I've suffered previously if that info is of interest to anyone and could perhaps help here...

Various 0x0000007A Stop Errors on Newly Installed Win7 and HD

A:Drawing Tablet Driver related 0x00000C9 BSOD Error

Well, you seem to be able to create dumps after all,


Code:
Unable to load image \SystemRoot\system32\DRIVERS\PTSimBus.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for PTSimBus.sys
*** ERROR: Module load completed but symbols could not be loaded for PTSimBus.sys
Probably caused by : PTSimBus.sys ( PTSimBus+1c0c )
It's your tablet driver,

Driver Reference Table - PTSimBus.sys


Code:
Image path: \SystemRoot\system32\DRIVERS\PTSimBus.sys
Image name: PTSimBus.sys
Timestamp: Wed Jun 17 19:20:48 2009 (4A39A480)
CheckSum: 00008268
ImageSize: 0000C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
From 2009.


Code:
CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP

PROCESS_NAME: WTSrv.exe
So with this particular crash solved, for now just uninstall this and start working on your other thread.

Read other 3 answers
RELEVANCY SCORE 62.8

<title>Stop Error 6/23/2014 ? Probable Cause Drawing Tablet</title>
<b>Operating System</b>
<p>Microsoft Windows 7 64 bit Ultimate OEM</p>
<b>Age of system</b>
<p>System Built December 2011</p>
<p>Operating reinstalled January 2013</P>
<b>Computer Hardware</b>
<a href="http://www.dhomolerdog.net/computerbuild/">My Computer Specifications</a><br>
Or view on <a href="http://pcpartpicker.com/b/rGBmP6">pcpartpicker.com</a>
<p><b>CPU:</b> AMD Phenom II X4 (MODEL: HDZ975FBGMBOX)</p>
<p><b>GPU:</b> Nvidia Geforce GTX 460 (MODEL: 01G-P3-1372-TR)</p>
<p><b>Motherboard:</b> BIOSTAR (MODEL: A870)</p>
<p><b>Power Supply:</b> CORSAIR (MODEL/SERIES/WATT: CMPSU-650TX/TX Series/650W)</p>
<p><b>Format:</b> Self Built Desktop</p>

A:[SOLVED] Stop Error 6/23/2014 – Probable Cause Drawing Tablet

Another Stop Error, Repeated and documented

Documented here on youtube ((The Video is 59 minutes, the stop error occurs at 45m45s)): Stop Error Wacom Tablet - YouTube

Stop Error Dump See Attached

Read other 12 answers
RELEVANCY SCORE 54.4

Hey Tech Guy and Gals,

I have a Gateway CX2618, w/ windows XP tablet edition 2005 version 2002, sp2. And wanted to wipe it clean and reinstall just the things I use. Plus my Tablet side of things hasn't worked in a long time and I was hoping the clean install would fix that.

But my recovery DVD isn't working (could be user error). I DO have apps that I need to keep and I think I've backed them up to my external HD correctly.

Need lots of help, I don't want to get rid of this lappy cause I love its style, but I need it to have better performance.

Thanks in advance
 

A:Win.XP.Tablet. Tablet part not working, recovery DVD not working. Plz Help

Bump
 

Read other 2 answers
RELEVANCY SCORE 54.4

I have upgraded my X201 Tablet to Windows 10 32bit. As far as I can tell, everything is working, including the WACOM drivers and touchscreen.  Wireless has worked perfectly so far, not sure about Bluetooth as I don't use it. My only issue is that the buttons on the display do not work. The power button located on the display does work. I tried installing the Tablet Button Driver II and it will go through the install but the buttons do not work.  This is the download link:http://support.lenovo.com/us/en/downloads/ds027627 The document claims Windows 10 compatability and was Last Updated :08 Jun 2015. On inspection, all the files extracted are dated from 2012 and when trying to manually run the software Windows throws up an error that the software is not supported on this PC.   I removed and reinstalled and noted that the driver information page when running the installer does NOT have Windows 10 listed as a supported system. My assumption is that the driver that they have linked on the download page is NOT the most current driver and is infact the driver for Windows 7 from 2012. Does anyone know how to contact Lenovo to get the correct driver posted to the page, or know of an alternate source to try and find it?

A:X201 Tablet Windows 10 Tablet buttons not working

hi, I can't help you with your question, sorry! Gooed to hear everything else is working fine on your system. Can you tell me what to do to get the x201 tablet's touchscreen to work!? I will have a clean windows 10 install. Where do i get the (right) drivers (windows, Wacom?) Thanx!Carlo

Read other 1 answers
RELEVANCY SCORE 53.6

I have a Lenovo x240 with a Core i7-4600U using Intel HD Graphics 4400 and I am attaching a Monoprice MST Hub Mini Displayport to 2 HDMI adapter to the mini display port on the x240. To this I have 15' HDMI cables attached. These are attached to 3.5" HDMI LCD screens on both ports.  I am unable to drive both monitors simultaneously, either in extending mode, or mirror/cloned mode. I have tried everything; every combination of plugging and unplugging; booting with various states of connection to the displays. Nothing is creating two attached screens both working simultaneously - in any fashion (cloned/extended). I have tried updating my graphics drivers and bios. I am not sure what the problem is. The product I am using to split the mDP is a MST Hub:https://www.monoprice.com/product?p_id=21975 I am looking at the refresh rate criterion, and I am unsure how to allow windows 10 to provide those refresh rates and resolutions for my monitors. (Editing in the display settings -> custom resolution, doesn't affect anything) Please advise.   ################################## ComputerLENOVO 20AL009CUSOperating SystemMicrosoft Windows 10 Pro (64-bit)ProcessorIntel® Core? i7-4600U CPU @ 2.10GHzGraphicsIntel® HD Graphics FamilyAudioRealtek High Definition AudioIntel® Display AudioNetworking and I/OIntel® Ethernet Connection I218-LMIntel® Dual Band Wireless-AC 7260Update availablePrivate Internet Access Network AdapterNpcap Loopb... Read more

Read other answers
RELEVANCY SCORE 53.2

My pc specs:
IBuyPower computer custom built
Windows 7 home premium 64 bit
Amd fx 6core processor
Graphics Amd Radeon Hd 6670 xlr8 edition
8gb ram / 1tb hdd
AsRock motherboard
Antivirus Panda cloud and Avast antivirus.
THE PROBLEM:
My usual browser is google chrome but lately (exactly a week ago) the Internet stopped working after a while.
(NOTE: PREVIOUS POSTS HAVEN'T WORKED NOR FIXED MY PROBLEM, PLEASE KEEP READING)
The Internet service stops working as if someone just unpluged my ethernet cable.
And minutes or seconds after that, my windows explorer stops working, taskbar and the entire system stops working.
I can still change windows with the keyboard shortcut but nothing else from there.
The ohly way my Internet and pc works fine is by safe mode with networking.

SOLVING THE PROBLEM:
I already tried to search for viruses or malware by cmd with the "-r -h -s" and the "/scannow" methods but nothing.
Already searched for viruses with boith of my antiviruses (panda and avast).
I have no saved point to reboot my system to a past saved poiht (the last saved point is the same day that my pc stopped working).

SPECULATIONS OF THE PROBLEM:
Long ago I disconnected the side panel from the pc box which includes a fan and lately my pc temp have raised up to 50• when before it was around the 30's or 40's.
The days this problem started I wasn't home and a blackout happened while my pc was still on.
 

A:Internet stops working, THEN windows explore stops working

Read other 6 answers
RELEVANCY SCORE 53.2

I have two staff members with different Yoga models, but with the same pen issue. Say, for instance, OneNote is open. The pen doesn't draw or write, but it can select and still be recognized. When I try using an old stylus from an HP Elitebook, it works TOTALLY fine - even the button on the pen functions properly. This suddenly started after months of the Lenovo pens working fine. I thought maybe it was a driver issue, but it can't be as the HP pen works.... I'm thinking it's the pen itself just getting worn down? It looks okay though but may be just a little loose... Any help / direction would be greatly appreciated!

Read other answers
RELEVANCY SCORE 50.4

I recently started getting very annoying problem. Firefox or other program stops responding and alt+ctrl+del stops working at the same time so I have to reboot. It happens quite often.

What I did already:
*Maybe virus? Full boot time system scan with Avast anti-virus. Nothing found.
*Oh well reinstall windows again... Yes, I did that too. Still same problem BUT ONLY after small break like two days or so.
And most confusing thing is that full screen programs like games do not seem to stop responding. Still, they BSOD like after few hours, but I do not think it is related. Like heavy load or something.

My system details hopefully in my forum profile, at least filled them recently.

So any other ideas how I can fix that?

A:Program stops responding and alt+ctrl+del stops working

Hi and welcome to SevenForums,
Please post this info
Blue Screen of Death (BSOD) Posting Instructions

Browsers well you might switch off gpu acceleration might help
What other programs are crashing or freezing it's usually a driver issue or Avast up to it's old tricks
Uninstall properly Avast and switch to Panda.
https://www.avast.com/uninstall-utility

If you're oc'ing your gpu or anything else restore to default.

Read other 2 answers
RELEVANCY SCORE 50

So, my husband bought me a Lenovo Yoga Book last year for Christmas. I like it. I think it's cool to be able to draw on the paper (which is what I do traditionally) and have it show up digitized on the screen. I was able to do a couple of cool projects sketches on it, but I haven't used it to it's full potential I believe, so I put it down for a while. Then, I started to research different drawing apps, seeing all the amazing artwork that people were creating in these different apps and stuff, and it got me excited about going back to drawing on my Yoga Book. So, I went to try to draw in ArtRage, and when I would try to draw on the Wacom tablet with my pen, nothing would show up. However, when I would draw on the screen with my finger, everything showed just fine. I tried to update it several times, I tried starting it over, I tried using a different drawing app; NOTHING. The only time the pen would work on the Wacom Tablet is in Notesaver. Even if I had ArtRage open, anything that I try to write on the tablet will only come up in Notesaver. I wasn't trying to just factory reset it right off so I called technical support to see if there was anything that they would be able to do to fix it without me having to factory reset it.So, I called tech support and they told me that I would have to pay a fee of $40 to be escalated to their software support. So I paid the $40, and within 3 MINUTES  of speaking to me, the tech tells me to just factory reset it. I was LIVID. Like, th... Read more

Read other answers
RELEVANCY SCORE 49.2

I was able to figure out my earlier questions, and in the interim, Monoprice's bulk Cat6 solid STP went OOS, and furthermore, they don't carry shielded keystones that I'll need.

Can anyone recommend a good value reputable supplier? Monoprice's earliest ETA is 11/16, and I've already made my access holes--much as I like Monoprice, I can't see leaving holes in the wall for what could be three months. Thanks!
 

Read other answers
RELEVANCY SCORE 49.2

I recently received this Monoprice Gaming Keyboard and am running into a serious issue. The keyboard itself works fine, very satisfying to use, but a few minutes after I plug it in (via USB) it simply "turns off." The NumLock light shuts off and the keyboard no longer functions with the computer, despite the fact that nothing has been unplugged. It won't reconnect unless I physically un-plug and re-plug in the USB cord. After that it takes a few moments (up to a couple minutes) to reconnect and become usable again, but only until it quits on me once more.

This keyboard is brand new, right out of the box, and the instructions given are as follows (and I quote):

1. Plug your keyboard into the USB ports of your computer.
2. Windows will automatically install all the necessary driver for the keyboard.

(And by the way, I made no mistakes in typing those instructions, it's written just like that.)

So clearly I'm frustrated that this doesn't work as intended, especially when its basically advertised as "plug-and-play" not to mention there is a large sticker on the box that states it's compatible with Windows 7.

I've tried a couple things here, including making sure the computer cannot shut off the USB device to conserve power, as well as updating Windows and all the drivers for both the keyboard and my motherboard. I basically did everything found in this thread but to no avail.

Any and all help is appreciated, thank you very much in advan... Read more

A:New Monoprice keyboard disconnecting after a few minutes

Someone at CNET suggested I try out the keyboard on another Windows 7 machine, and sure enough, the problem persisted there. This thread is closed.

Read other 2 answers
RELEVANCY SCORE 48.4

After installing the Windows 10 creators update, I have the following problems: - The touch including the Windows key does not work any more. I can not find a driver.- The energy display is also missing. - The tablet works very slowly. Does somebody has any idea? Thanks Andreas

Read other answers
RELEVANCY SCORE 47.6

Hello all! I'm sorry if this question was asked before, but I can't find it in the search function.  I recently purchased this computer and dongle, but the dongle is not recognized by either port on the computer.  One port says the dongle is 2.0 and outdated, and the other says there's a problem with DisplayPort.  Any advice on next steps?  This is the cheapest of the few video outs which, from my limited research, were tested not to fry something.  I don't want to subject my new computer to a whole bunch of other dongles if I can help it!

Read other answers
RELEVANCY SCORE 45.6

For the past several months, my touch screen on my Yoga 720 won't work and occasionally the mouse will stop too. I work around the mouse by using an external mouse until magically one day it starts working again on my computer.  Regarding my touch screen, it just is not responsive.  any one else come up with a solution for this?

Read other answers
RELEVANCY SCORE 45.2

HTTP traffic in IE 7 stops working about five minutes after booting up. This started after the latest Windows Update.

HTTPS and email always works .

The only solution is to reboot the computer. After about five minutes, HTTP stops working again.

I have 2 GB MB of RAM, Windows XP Pro, service pack 3. This happens even when the browser is the only program running.

I have updated and run Ad Aware and Spybot.

I am up to date with AVG and ran a complete system scan. Nothing found.
 

A:Solved: HTTP stops working - HTTPS and email always keep working

have you tried resetting all of you internet options to the default values?
 

Read other 3 answers
RELEVANCY SCORE 45.2

So recently the sound on my desktop and my laptop has stopped working. For seemingly no reason. I really don't understand it.

I first noticed it with my desktop. The sound just randomly stopped working. But not...entirely. It's really strange and complicated what's been happening, so bare with me while I try to explain it as best I can.

PC:
First time sound stopped working on PC. Restarted computer, sound came back, no issues.

Second time I woke up to find VLC frozen. Sound wasn't working. I restarted VLC. No sound. Found out that there was no sound on the computer at all. When I'd try to increase the volume on VLC, it would only change within an interval of ten percent. So it was at 50 percent initially. Would not let me go below 50%, but not above 10%. Sound didn't work anyway. Restarted, sound returned VLC working fine.

Third time I was playing Dragon Age: Inquisition. Sound worked fine, using my headset (Turtle Beach). Went to speakers to lay down and watch some shows on VLC. No sound on speakers. Switched to Turtle Beach again, sound returned. Restarted VLC, now suddenly no sound on VLC OR speakers. Had to restart computer, no issues after restart.

Laptop:
First time sound stopped working, used the "disable audio and reenable audio driver," didn't solve anything. Restarted, sound came back. Sound stopped working again same day, restarted, sound came back.

The next time I restarted the audio driver (Realtek) and then I shut down Explorer and then restar... Read more

A:Sound on Laptop and Desktop Randomly Stops Working and Working

Update: I'm not at home to test my PC, but I think I discovered the issue. It seems to possibly be a glitch or something with flash player.

After watching an episode of Daily Show on Hulu, I went back to Tumblr and saw that a video didn't have sound, and then all sound on my computer was suddenly gone. I then tried something out, and shut down flashplayer. That temporarily brought sound back.

But it quickly went away.

Then I shut down Firefox and flash player entirely, and sound comes back even when Flash Player comes up.

What could cause this?

Read other 9 answers
RELEVANCY SCORE 44.8

Hey guys, i'm stumped.
 
Laptop Info:
Toshiba Satellite L75D-A7283
Windows 8.1
 
Track pad doesn't work. All started randomly one day when I started the laptop up. Just didn't work. Now the keyboard will stop  working after about 10 minutes.
Things I've tried:
FN Key  + F5 (enable/disable trackpad)
Double tapping the top left corner of track pad.
Uninstalled all trackpad drivers, restarted, let windows install drivers.
Uninstalled all trackpad drivers, restarted, installed Toshiba Drivers
Checked BIOS for disabled Trackpad.
Lastly, reinstalled windows 8.
 
I got nothing. I'm stuck.
Any suggestions?
 
Picture of error; http://i.imgur.com/jTMau9y.png

A:Laptop trackpad not working. Keyboard stops working.

Ruhhh rohhhh. No one has any ideas?

Read other 14 answers
RELEVANCY SCORE 44.8

Hi all,

I hope someone can help me with this irritating frustrating productivity killer.

Basically what happens is that I'm using the browser (Firefox 2 or IE 6, doesn't make any difference) and at some point, sites stop opening - basically the same response as if the net went down - connection error.

Strangely enough, any URL that is in https instead of http, always works. Maybe this can help spot the problem - so I hope.

The only solution usually is to restart the browser and in some extreme cases, I have to reboot the computer.

I have 700+ MB of RAM, and this happens in situations when I have an average amount of open applications, and easily 200 MB of free RAM.

But sometimes, after closing programs that not FF or IE, the browsing also recovers. This makes me wonder if there's anything to do with memory usage. Just a suspicion.

I'm running Avast, Kaspersky Anti-Hacker, Spybot, System Mechanic, Webroot SpySweeper, and in all fronts I seem to be clean from spyware, viruses, etc.

Worth mentioning is that I've had some pretty tough to kill spyware infection last week. Only mixing Webroot+Spybot+Process Explorer have I finally killed the menace. I'm not sure if it's related as I am not sure when the infection entered my machine. Unfortunately I've already forgot the name of the *******... I'm just wondering if even having removed it, damaged could remain...

I'm attaching a log of HiJackThis with the hope that in the ca... Read more

A:Browsing HTTP stops working although HTTPS always keeps working

i would firstly try only 1 anti vi running at one time, sometimes i have found resetting internet options defalts helps
 

Read other 3 answers
RELEVANCY SCORE 44.8

Hello!
I'm using my laptop in a desktop mode. but some days when i start up the computer the mouse is on (Sees the red optical light.)
But the cursor dont move when i move the mouse. when i drag the cable out and in again the ligh wont turn on. i change usb port and it works. 1-3 days later the same thing happends and i change to the previous one.

And if i put anything else in the port that stops working it wont recognize. its like it temporarely dies.
Is this becouse of the ports is 3.0 and the mouse is 2.0?
Have 3 usb ports, 1: Keyboard 2-3, Mouse.
Mouse: Logitech Gaming mouse g400.

A:My mouse Usb port stops working. but starts working again after a day.

I sort of have nearly them same problem only on my work pc. It seems to me if you leave it in for about 5 minutes it starts to work again See if leaving it in works.

Read other 9 answers
RELEVANCY SCORE 44.4

I got my hands on a used (kinda old) tablet PC (Fujitsu C-500) that I was able to put WinXP on. It has side keys on it, like a number pad and other things like volume control, and brightness. These work fine, but I can't get the tablet to recognize that I am using the touchscreen itself, even though the other side keys are attached via the touchscreen. It didn't come with a stylus, and I have found a website online to purchase a replacement stylus, but they only sell them in a pack of 5.

First of all, will purchasing a new stylus enable me to use the touchpad itself? And second, is there a generic driver for XP that would allow me to use the stylus or other pointing device (such as a finger) as a "mouse"?
 

A:Tablet PC not working

Read other 8 answers
RELEVANCY SCORE 44

Hi

I have a windows 8 quantum view tablet. It was taking ages too get charge and sometimes the screen just goes black. On the charger is a power setting for volts I turned it up and now my tablet won't come on the light on the charger is blinking instead of a full blue light and the light on the tablet does the same any ideas if the batterie is gone or what can I do

Thanks
 

A:Windows tablet not working

You might have a universal charger if it has a volts switch. My brother told me a friend of his bought a
universal charger and he bumped the voltage up too high and it fried the battery and charging circuit of the laptop. Had to send it to the factory for repair, big bucks! never use an adjustable charger! Is it still in warranty? Support here, couldn't open their files https://azulletech.com/support/quantum-view/
 

Read other 1 answers
RELEVANCY SCORE 44

I got my new graphics tablet today. A hanvon graphicpal. I installed the cd and went to configurate the tablet but once i click the .exe file nothing happens. I downloaded another driver and when i click the configuration icon now i get a windows prompt saying "run a cpl legacy elevated". I have no idea what to do anymore. Even when i try opening from system32 nothing happens. Ive uninstalled and reinstalled the driver about 20 times now. BTW im using a an asus laptop i made sure the system requierments are met.

Thanks for any help
 

A:Graphic tablet not working

Read other 6 answers
RELEVANCY SCORE 44

My Tablet mode and touch screen are not working for this product. I tried using it for the first time today and have not been able to find any information about how to troubleshoot this problem on my own. One of the reasons I bought this laptop is because it was supposed to be touch screen as well. The salesman showed me the same laptop on display the NoteBook 15 and turned the tablet mode on and was able to use the touch screen and pull up a touch keyboard. Once I turn tablet mode on I can find the touch keyboard and use my mouse to pull it up but the tocuhscreen itself is not working. Anything I can do?

A:Tablet Mode Not working

Hi,This model doesn't come with touchscreen display panel from factory.Description: GNRC PANEL 15.6 INCHHD BV WLED SVA220 eDPSlimRegradsVisruth

Read other 1 answers
RELEVANCY SCORE 44

It works on my admin account, but not on this one...I'm guessing the driver can't start up on this standard account? Is there a way to change this?

A:wacom tablet not working =x

What model tablet are you using? I have the one listed in my specs (see below) and that works perfectly for me. In fact, I had to resort to using it for a while when the left mouse button failed (I have since got a new mouse).

Read other 7 answers
RELEVANCY SCORE 44

Dodocool 3 usb 3.0 + ethernet + PD 2.0.So when I plug it in and only charging works. Sometimes if I boot with it windows might reconginize it but it could also give error 43 in device manager.Microsoft seems to have a solution but driver update via windows is disabled. How can I change that?

Read other answers
RELEVANCY SCORE 44

Hi! I tried searching to see if this was already covered and didn't find anything, but maybe it is and I didn't see it. So my Y70 touch screen isn't working, which I enjoy using cause this thing is huge and it's faster with some things. Tablet mode is on, I have Windows 10, it was working a week or so ago. I've finally had time to investigate today. What would cause this to happen? Could updates have installed and done something strange? Thank you!

A:Y70 tablet mode isn't working...

Hi Tea,
 
Welcome to the Lenovo community!
Did the touch screen ever work in tablet mode?
 
Regards,
Shashi
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

Read other 5 answers