Over 1 million tech questions and answers.

Qosmio G50-12q - Vista does not load after connecting external USB keyboard

Q: Qosmio G50-12q - Vista does not load after connecting external USB keyboard

I have acquired a keyboard enermax acrilux usb and have connected the taken keyboard to the qosmio g50 12q at the same one where an other keyboard was attacked usb and that it worked without problems.

After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista ultimate and the inner impellers have been activated.
Never happened previously. I have doubted of the enermax

Reconnected to taken usb the mail of the qosmio it has on the back not given to problems of start of impellers
As the enermax it never has blocked the start of the system operating and put in function the impellers also having connected it to the same one taken usb to which precedence was connected one keyboard ?

Tank you

RELEVANCY SCORE 200
Preferred Solution: Qosmio G50-12q - Vista does not load after connecting external USB keyboard

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Qosmio G50-12q - Vista does not load after connecting external USB keyboard

Hi mate

Sorry but you message I really hard to understand?
What I understand is that you connected an external keyboard to the Qosmio and now the notebook does not boot up correctly. Is it right?

What to say; maybe you should disable the USB legacy mode in BIOS.
Please check this!
To get into the BIOS press F2 and while powering up the notebook.

Read other 2 answers
RELEVANCY SCORE 60.4

I currently have a Yoga 2 Pro laptop that has Bluetooth, 2 USB ports, 1 micro HDMI port, and a 3200x1800 resolution.

I want to connect it to a pair of desktop monitors (lower resolution) and a wired USB keyboard as effortlessly as possible (since I will be moving the laptop back and forth a lot). What hardware is needed to accomplish this?

Let's say I wanted to connect it to this EVGA dual-monitor stand (haven't purchased it yet), which appears to use two DVI inputs, would I need some dual DVI into HDMI adapter (if such a thing even exists)? Or would I be better off just trying to connect it to a laptop docking station?

If I don't go the docking station route, I would like to connect to my wired/USB keyboard via Bluetooth if possible. Just googling around came up with a few USB -> Bluetooth adapters (1, 2). Does anyone have any experience with these or better recommendations?

Lastly, will jumping from 3200x1800 resolution to something like two 1400X900 resolutions cause any issues? I don't care if the picture quality is lower on the monitors, but I do want to make sure they're working full-screen.

I have no experience connecting a laptop to normal desktop hardware in this way so I'd really appreciate any input or suggestions. If you have any hardware recommendations (including a docking station or better dual-monitor setup), I'd love to hear them. Thank you.
 

A:Solved: Connecting laptop to external monitors/keyboard

Take a look at Lenovo's USB 3.0 docks here, type your model in to get the recommended ones: http://shop.lenovo.com/ca/en/accessories/dock-port-replicators/
One USB cable will connect everything back to the Yoga.

The converting to Bluetooth makes no sense, you're just adding more devices and hassle. A simple USB hub would be better if you didn't go for a full dock. Connect the wired mouse and keyboard to the USB dock or buy a new Bluetooth keyboard/mouse.

Once you undock the Yoga's screen should kick back in and work at it's supported resolution.
 

Read other 2 answers
RELEVANCY SCORE 57.2

No matter how flashy and improved windows gets, it always contains the same amount of Microsoft stupidity that I know will never disappear from the windows platform.

I have an HP laptop with the standard built in Intel graphics card. I always connect my laptop to one of my LCD monitors or lately my plasma TV. Its great. but these two problems really kill my mood:

1- when I connect them it often times forgets what my previous settings were (Second monitor set as primary, not mirrored) so i have to always go into settings and change that. For weeks it might remember those settings then out of the blue it reverses them so that the laptop monitor is actually hte primary while the TV is the secondary, or isnt checked as "Attached". What is this? In 2008 Microsoft still can't get something like this right. On one of the monitors it forgets the resolution i set it to so I have to keep resetting it.

2- When I unplug the external monitor from the laptop sometimes, like right now, the task bar becomes invisible (except for the start menu button) so the only way for me to figure out where the icons in the tray are is by mouseovering them. totally retarded. I have to restart to fix this.
What pisses me off the most is concern #1. it should remember what the settings are without contantly reversing them or worse, me having to go into settings and actually tell it that there i another monitor connected.

Anybody have this problem? Are there any fixes? I have already downloa... Read more

A:Connecting external monitors/TVs to laptop w/Vista

I've just noticed something that nobody else has, Microsoft isn't stupid, infact its the latter, No.1 Rule when connecting hardware... Turn off the computer before connecting any new hardware, I worked this out with Windows XP and if it's been happening since this version then the problem isnt Microsoft's operating system , it's the user being oblivious of how to use the operating system without fault.

Read other 4 answers
RELEVANCY SCORE 56

I have a Western Digital MyBook (external drive that connects via Firewire) and an iPhone. Up until about a day or so ago, both were working just fine. I could see both devices in explorer and connect to them without any problems.

Now, I'm no longer able to see them in Explorer. My PC still "sees" the devices on some level because the iPhone will connect and sync with iTunes. (I just can't get to the iPhone as an USB drive from explorer.)

The HD is still listed in the device manager. However it is listed as "This device is not configured correctly." I've tried uninstalling, disabling, reinstalling drivers, different ports and have had no luck getting my machine to see either device. I've rebooted with them plugged in/unplugged, drivers/no drivers, and even tried different ports.

I've also verified that there is nothing wrong with the HD or the iPhone. Both connect flawlessly on my husband's Vista (non 64bit of course) machine. I also have thumb drive that connects (and shows up in explorer with no problems).

Any suggestions would be appreciated! Thanks!

A:Vista 64bit stopped recognizing and connecting to external drives...

hi try system restore

Read other 3 answers
RELEVANCY SCORE 56

I have an old external hard disk (2005) and when ever I try connecting that to my Vista laptop thru USB, I get the dreaded blue screen. I am running Vista Home Premium 64bit on the laptop. On connecting, it says, installing device driver in the system tray and then the blue screen comes up.
I am able to connect to my netbook which has XP Home, with out any problems.
I have wiped put the drive using Media Wiper, then formatted it and still the error would not go away on my Vista PC.

This is the Problem Report I found -->


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFFA600092307D
BCP3: FFFFFA60021D27E8
BCP4: FFFFFA60021D21C0
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\WINDOWS\Minidump\Mini052409-01.dmp
C:\Users\VjPhans\AppData\Local\Temp\WER-61370-0.sysdata.xml
C:\Users\VjPhans\AppData\Local\Temp\WER146A.tmp.version.txt

Read our privacy statement:
Microsoft Online Crash Analysis

--------------------------------------------------------------

I have attached the dump files that were generated by the system.

I would appreciate any help from you guys.

Thanks,
VJ

A:Vista Blue Screen on connecting External Hard Drive

While doing some searching I found this post in another forum from which it looks like this is a problem thats been happening with Vista SP1.

Code:
http://www.neowin.net/forum/index.php?showtopic=619530
Thanks,
VJ

Read other 1 answers
RELEVANCY SCORE 51.2

Hello.
I want to buy this model of laptop from Italy. Can I buy anywhere polish keyboard to this laptop ?

A:Polisch keyboard for Qosmio X70-A

You can get the Qosmio X70-A also in Poland.
The QOSMIO X70-A-12X PSPLTE-0CF062PL was released for polish market and contains the polish keyboard layout.

Read other 1 answers
RELEVANCY SCORE 51.2

Where I can find of the relative photos to the disassembling of the keys of the keyboard of Qosmio g50 ?

A:Qosmio G50-12Q: How to disassemble keyboard key?

Do you want to replace the keyboard or the single buttons on the keyboard.
As far as I know you cannot replace or fix the single buttons but you can remove only the keycaps?

Read other 7 answers
RELEVANCY SCORE 51.2

I can connect the IR emitter for use nvidia active shutter glasses and a 3D external monitor ? such as a video projector 3D?
How do I install the driver emitter?

A:Qosmio F750 and external 3D monitor

You want to watch 3D content on external 3D monitor?

NVidia 3D Vision allows you to watch 3D on external monitor.
Here some details and requirements:
http://www.nvidia.com/object/product-geforce-3d-vision2-wireless-glasses-us.html

Some Toshiba notebook models provide the NVIDIA? 3D Vision
http://www.mytoshiba.com.au/support/items/faq/462

3D Vision can work with an internal LCD or external display that support 3D Vision via external display port. When you connect external display that doesn?t support 3D Vision, please disable 3D Vision

Here you can find great info how 3D Vision can work on external monitor
https://forums.geforce.com/default/topic/571045/-tutorial-review-3d-vision-on-external-monitor-using-an-active-adapter-displayport-to-dl-dvi/

Read other 7 answers
RELEVANCY SCORE 50.8

I have a Qosmio X70-A-12N, newly bought last September, Windows 8.1, 64 bit.


After working properly (and great!) for half a year, the keyboard started to stutter.

If you type a paragraph or two, with let's say 250 words, every then and now, let's say every 10th or 20th word (undpredictable), a key-stroke yields no results. I tried a different keyboard via USB: no problems, so it has to do with the Qosmio in-built keyboard.

It does not depend on specific keys, and it does not depend on the pressure with which you press down the key.
Any key may turn out to be ignored every now and then.

All drivers have been updated to the most recent issues, BIOS is 1.50.

It seems that the problem is most prominent when working on battery (not sure).

Is this a software or a hardware problem? Does the keyboard need to be exchanged?

A:Qosmio X70-A - keyboard is not working properly

My first thought was BIOS update but according Toshiba download page you have latest BIOS version.
You know it is not easy to say what is wrong there. I cannot say for sure if there is some problem with the keyboard but maybe you should contact nearest Toshiba service provider, explain the situation and ask for help.

They should know what must be done. at least, they have very good diagnostic tools and it is possible to detect the problem.

Read other 8 answers
RELEVANCY SCORE 50.8

Hello to everyone out there, I own a Qosmio E10/2kldew and I bought this at Yodabashi Shop in Japan last year. Unfortunately my package didn't include a driver disc nor did they include a windows recovery CD.

My question is, how do I gain functionality of the japanese characters on the keyboard without using REGIONAL and LANGUAGE options inside windows. When my notebook was first running I was able to press a button under the escape key that allowed my to type in Hiragana, Katakana and English respectively. If anyone knows a link that will lead me to a driver for this I would really appreciate your help. I have everything else running perfectly on my pc now except for this.

Kind Regards

A:Qosmio E10: Japanese keyboard drivers?

Hey Japandy, here's a link to the japanese driver updates for the E10.
http://asp.fresheye.com/pc/?func=pi&c2=ANY&category=131020&keyword="QosmioE10 "&srt=IntB&order=d&cpg=10&session=2005103008001382 5

I couldn't find an keyboard driver though. I suspect because it doesn't need any!
On an original JPN XP, it should be recognized directly.
Later,

Alcahest
Btw, i suggest you try the new Toshiba Virtual Sound which was just released ;)

Read other 1 answers
RELEVANCY SCORE 50.8

Help!

The baby was playing with our PC and has somehow disabled the wireless keyboard.

How do I unlock it?

A:Keyboard is disabled on my Qosmio PX30T

The wireless keyboard supports an power button which is used for turning on/off the power of the computer and additionally there is an power ON/OFF slider which is used for tuning on(off the power of the keyboard.
Check if its set to ON position.

Furthermore the keyboard contains a battery indicator in the right upper corner.
This indicator glows for nice to ten seconds when the keyboard is turned on. Blinking for five seconds show the battery of the keyboard is low and fast blinking for two seconds and then going off shows the battery of the keyboard is exhausted.

After the wireless keyboard has been powered ON, it should be detected by computer automatically.


By the way: read user manual ? it helps a lot ;)

Read other 1 answers
RELEVANCY SCORE 50.8

Hi,

I had my laptop 2 years now and never had any problems before but recently some of the keys on my laptop keyborad are not working like fn key, i, e, r, t, y, u, ,i, o, = etc. Curently I am using an external keyborad to overcome this problem. I did a complete reinstall but problem still persits.
Can you please suggest where the problem might be. It is very confusing as some keys are working fine but some are not.

Regards,
Abhi89

A:Some keys on the keyboard are not working on my Qosmio F60

>Can you please suggest where the problem might be.
In my opinion problem is defective keyboard. As you can see complete OS reinstallation didn?t change anything. It must be hardware related issue.

Sorry but I think keyboard must be replaced.

Read other 1 answers
RELEVANCY SCORE 50.8

I spilt a small amount of hot chocolate on one side of my Qosmio E10. Oops!

I've since given it over 24 hours to dry out, and I've also taken apart the keyboard to wipe it down - there was dried hot chocolate residue in it. I will try turning it on again in a while to see if the keyboard now works (it stopped completely, just made beeping sounds), and have done a search online for spare keyboards...

Does anyone have any further suggestions before I purchase a keyboard? And if I do, how do I go about installing it? Is it just a matter of taking the chip type thing out, and putting the new one in, and then screwing everything back?

Thanks!

A:Spilt hot chocolate on my keyboard - Qosmio E10

Hi dude.
I sorry for your accident but I have qosmio E10 with problem in motherboard, so if want I can sell to you my keyboard. is UK setup .
Let me know.
Take care

Read other 2 answers
RELEVANCY SCORE 50.8

hello , i actually have a problem with the backlight keyboard on my toshiba qosmio x70 a ,, the only option to turn off or on the backlight is through Bios , altho i can't turn off/on the keyboard using the "fn+z" , i can't also set a timer for the backlight to turn off after a while .help !

Read other answers
RELEVANCY SCORE 50.8

Brought Toshiba Qosmio x70-a-12x ( 32 gb ram) i dont even know what is the name of laptop exacly cuz cannot find it even in Toshiba support page PSPLTE-0CF05VH2 which could not find in database of yours.

I wanted to ask few question by support ticket but there is not any option like that or its well hidden from everywhere.

Its gamer laptop and if you read the properties of laptop its amazing yet when u play u feel like not even in half properties of what types at the laptop.

Having heat issue even with the cooler + removed the little cover from bottom which HDD / Rams visually can see and noting helps after i play a hour any game or watch a movie suddenly starting to hear ( either fan or ssd ) starts working with more power and slows down after minute later.This is repeating every 2 minutes.

Each time this thing happens my laptop 0 fps for 2 seconds.Start of working with more power stuck - slowing down also stuck. so every 1 minute at the beginning of first minute and end of minute 0 fps.How could i enjoy this laptop which was really costly.

Thermal is new cooling ways are clean everything as suppose to be.

Read other answers
RELEVANCY SCORE 50.8

Hello,

am about to buy an external monitor and I was wondering what would work with my laptop.
I want it to work as an additional surface (Not a copy of my current screen) with both screens working at the same time.

My laptop seems to have a VGA port and an HDMI port.
I have already tried through the HDMI port with an old -probablybroken- monitor but that didnt work out.
I dunno if that's due to the monitor or my laptop.

I also tried searching for VGA monitors but when I checked the specs for my laptop it didnt list that it could connect a monitor via VGA....

Anyone knows what actually would work?..
thanks in advance!

A:Qosmio x70-A-12 - question about the usage of external monitor

As you already said: the notebook supports the VGA (RGB) monitor out port as well as the HDMI out port.
So you can use one of the ports in order to connect the external monitor.

Nowadays the HDMI port is a standard interface which is supported by almost all external monitors? and I would recommend you to use the HDMI connection. The HDMI supports digital signals and provides better picture quality.

So it?s your choice now to pick a good working external monitor.

Read other 1 answers
RELEVANCY SCORE 50

Hi,

I need to connect external camera to my Qosmio. I installed allready the software, but the application see the internal camera only. How to disconnect the internal camera?
Thanks for your help.

K-July

A:Qosmio X series doesn't detect external camera

You can disable each device in the device manager
Go to control panel -> device manager
Search for the internal webcam, click right and choose Properties.
Now switch to the tab ?Driver? and click on the button ?Disable?.

But I'm wondering about the external wecam software.
I don?t know what webcam or software you want to use but from my point of few after the connection to USB port, the external webcam should be recognized by installed software.

Read other 1 answers
RELEVANCY SCORE 50

Hi all,

I have a simple question....but looks like it's difiulct to fnd an answer. Is it possible 6ot connect an external monitor to this lapop and use the 120hz setting?

I really tried all but neither the helpdesk of Toshiba or my computershop can help.

Really would be so happy with good advice. I am using te HDMI port, but in Nvidia settings I can only select 60hz.

Monitor: BenQ XL2420T

Best regards,

Henny

A:Toshiba Qosmio X70-A-11T + External monitor 120hz or 144hz

Originally Posted by hennyhovens


Hi all,

I have a simple question....but looks like it's difiulct to fnd an answer. Is it possible 6ot connect an external monitor to this lapop and use the 120hz setting?

I really tried all but neither the helpdesk of Toshiba or my computershop can help.

Really would be so happy with good advice. I am using te HDMI port, but in Nvidia settings I can only select 60hz.

Monitor: BenQ XL2420T

Best regards,

Henny



Sorry but im also unable to find details on the max external video mode, on earlier models they do give this information in de specs sheet. But the previous models had 100hz refreshrate from hdmi at hd resolution so Id suggest this is the least yours can do.

Read other 1 answers
RELEVANCY SCORE 50

I have a RCN-PX30t-A-119 - Qosmio PX30t-A-119 23" Touchscreen All in One PC Core i3-3120M 8GB RAM 1TB HDD

Everytime I try and configure my external Microphone i'm getting the message 'Windows Shell Common DLL has stopped working' and the Microphone doesn't work. Can anyone help me fix this?

A:Qosmio PX30t-A-119 - external Microphone configuration error

Hi Howie

Just for better understanding can you please explain to us what are you doing exactly and which steps you do before this error message occurs?

Read other 3 answers
RELEVANCY SCORE 50

Hi,

I have a Qosmio X770 and its blue screening occasioanly but I cannot find out why as the Crash dump driver fails to load on boot.

I gave googled and tried recreating page file, deleteing, it rebooting, recreating again, also setting dedicate dumpfile in the registry and still every boot I get event ID 45

The system could not sucessfully load the crash dump driver.

I have ran SFC and all files are fine

Windows 7 64 Bit, Main OS

anyone any ideas?

Thanks

A:Qosmio X770 - BSOD and Crash Dump Driver Failed to load

Found an user who had the same issue with the dump file and this could be solved by deleting paging file, then resetting it and after that seems to have solved the problem...

Read other 8 answers
RELEVANCY SCORE 49.6

I have a Toshiba Qosmio Dx730.
I am not using the supplied wireless keyboard, but a standard D+ll wired keyboard as I prefer the keyboard layout.

However the keyboard indicator for the virtual keyboard is malfunctioning, and appears in the bottom left of the screen randomly (regardless of whether I hit caps lock or not).

It has now begun to randomly switch Caps Lock on and off, for no apparent reason.

Can I switch the keyboard indicator off somehow?
I never use the virtual keyboard, so I would be happy for that to be turned off as well.

Thanks for any assistance!
Lyn

A:Qosmio Dx730 - virtual keyboard indicator issue

Hi

The virtual keyboard indicator (icons) in the lower right corner of the screen appears because the provided WiFi keyboard does not support the indicators for NUM LOCK, CAPS LOCK and SCROLL LOCK. Therefore the ?virtual? indicators appears to shows the status of mentioned buttons.

You can turn the icons ON/OFF by clicking the Toshiba keyboard indicator in the notification area on the task bar.

Read other 3 answers
RELEVANCY SCORE 49.6

Just bought an AIO Qosmio px30t-a-14r / windows 8.1

At power-up, during first setup, I had to choose language and keyboard setting.

I choose language: englisch-uk.
For the keyboard I had the choice of 3 types:
- belgian comma
- belgian dot (or point?)
- belgian french
I did choose belgian comma.

However, further down the setup process I could test key response of the keyboard with this setup.
This was the wrong setting.

How do I change it to 'belgian dot' or 'belgian french'.
Should be one of these 2 but I do not know how to change it.

Has anybode a suggestion?

thanks
RC

A:Qosmio PX30T-A-14r: How to change keyboard language type

This is not very tricky:
Press the Windows key + C to open your Charms.. Then select the Settings charm, and then click Change PC settings. Click Time and language, then select Region and language. On the right, select your language and the click Options. Click Add a keyboard and then select the keyboard you want from the list.
This will add your selection to the Keyboards list.
You can remove a keyboard by clicking on it then click Remove.
Furthermore you can also add multiple keyboard layouts and switch between them when needed.

You can switch between your keyboard layouts clicking on the current language and keyboard in the lower right, and then select a keyboard layout. Or you can use the 2nd method: On your desktop you will see your current language in the lower right corner beside the clock. Click on your current language and choose a keyboard layout.

Read other 1 answers
RELEVANCY SCORE 49.6

hello

after instaling windows 7 and the nvidia driver, the external screen dosent display in HD like before,
I tried to configer setting but no resolt,

What driver do i need to install?

A:Qosmio F755-3d150 - Win 7 - no High definition on external display

In your other thread I read that you have problems installing some drivers.
I guess the issue is related to missing graphic card driver and therefore you are not able to choose higher display resolution for the external display.

But if you have already installed the right graphic card driver, then I would recommend you to check the external display resolution settings.

Read other 1 answers
RELEVANCY SCORE 49.6

Dear all,
I have a QOSMIO X770-13C PSBY5E, and I used it with no problem duing a year.
Since arround 3 months, my laptop not reconize my external graphic card, a geforce GTX 560m. At the first hours of occurance of this problem, a message indicating that my graphic card is not a removable device, and can't be disabled was shown on the screen, and the card was no longer detected.
I succefully tried for many times to reinstall the operation system (OS), WIN 7 home premium edition 64 bit with the original key offered with the gamer notebook, but the problem remins as it.
The laptop reconize the graphic card after an hours of AC adapter and battery removing, and a complete OS reinstallation. The card is detected as VGA standard, and a compter restart is need, but after restarting, the card is detected as VGA standard with the error code 10, and still allow a driver installation. After a driver installation, and a restarting of the computer, the card is then disconnected after a few minutes of use with the message indicated below.
I tested many versions of the driver : 388.13 WHQL, 381.65 WHQL, 347.52 WHQL, with a manual installation. However, the result is the same. In addition, a blue screen appear with the older version 268.85.
I tried a software reset of the bios, no result, and I don't find any configuration of the external GPU or PCI-express in the bios menus. In addition, I don't know how to do a hardware bios reset in this version of notebook.
I thought to an... Read more

Read other answers
RELEVANCY SCORE 48.8

Hey guys!

I recently got a Casio keyboard, with a new MIDI cable.

I'm a music artist and I'm totally new with this 'keyboard-to-computer-via-MIDI' stuff.

I don't know how to connect my Casio Keyboard to my computer with a MIDI cable. I've mostly been using Mixcraft's music library, but I want to start something new with my new keyboard.

Can someone PLEASE tell me how I can connect my keyboard to my laptop via MIDI?

I've looked at other forum posts and contacted a few music artists..........they had nothing.

Please help!

Thanks!

Read other answers
RELEVANCY SCORE 47.6

hello admin, i nid ur help. after the liquid spillage on my laptop my built in keyboard stop working except the shift, function keys and enter are still working..i tried the on screen keyboard but still the same as the built in keyboard and then i tried my external keyboard but nothing happens..so my last option was to reformat my laptop but i cant sign in on my accnt because my key letter on my laptop doesnt work.. plss help..

Read other answers
RELEVANCY SCORE 46.8

I bought a pc toshiba qosmio which was delivered to me with WINDOWS 8 version that does not please me at all.
I would like to install the VISTA PRO version. Is it possible to install while keeping current files because I want concerns my installed programs without having to reinstall. Thank you for answer.

--
j'ai achet? un pc toshiba qosmio qui m'a ?t? livr? avec la version WINDOWS 8 qui ne me plait pas du tout.
Je voudrais donc installer la version VISTA PRO. Est-il possible de l'installer tout en gardant les fichiers actuels car je voudrais concerver mes programmes install?s sans avoir ? les r?installer.Merci pour toute r?ponse.
--


+Message was edited: content translated by Google translator+

A:Installation of Vista on Qosmio

English please

Read other 2 answers
RELEVANCY SCORE 46.4

Qosmio G50-12Q - Windows Vista ultimate 32 bit

On which internal HDD of the PC ( C - F - D ) is Vista installed by the producer in case you wanted newly install the system but without the DVD?

A:Qosmio G50-12Q - on which partition is Vista installed

Hi

The Qosmio G50-12Q seems to be equipped with 2 HDDs.
I assume the first HDD is partitioned in two partitions and the second HDD is not partitioned.

So vista seems to be installed on the first HDD, partition C.

I think you want recover the notebook using the HDD recovery procedure. Right?
I found here an nice documentation:

+How to recover a Toshiba notebook with the HDD recovery procedure+
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

Read other 1 answers
RELEVANCY SCORE 46.4

Can you help me where to get a the drivers for this model Qosmio E10/1KCDE?
My laptop has a TV tuner & portable DVD player but now it;s not working after i installed Vista Ultimate.
Can you help me how to repair it.???

Thank you....

A:Need Vista drivers for Qosmio E10/1KCDE

If I am remembering well Qosmio E10 is not Vista supported.
Please check Toshiba download page and be sure the Vista drivers are available or not.

If not then you have problem. You can try to identify the hardware components and check manufacturers support page.
Can you please send exact model number of your notebook?

Read other 2 answers
RELEVANCY SCORE 46

Hi again.

My g10-133 had the uypgraded motherboard installed by Toshiba as it had been backwards and forwards in it's first year with graphic chip problems, so they installed the motherboard with the 6200 graphics chip.

Up until recently I have installed Windows XP from one of my defunct computers as I never got anywhere with my original qosmio recovery disk as it was damaged. I recently purchased another G10 as I wanted to replace keyboard and display and it came with disks,

I have put in a raw drive. I have used the Qosmio Player Recovery disk, and this reports that it is complete. I have then installed the Toshiba Recovery Disk which has Windows MCE on it. (I now have three original copies of this). But when windows goes to start, the computer gets past the Bios and then goes quickly to blue screen of death...I have tried using break so that I can read this, but this doesn't work. I have tried more than one windows disk, but no joy. I have also got special instructions from Toshiba, which has the Qosmio updater on it, and also another disk which has some of the extra drivers.

So far I have tried all sorts and every time I go to start the laptop it crashes. The Toshiba Recovery disk has two methods on it an automatic one, and an advanced on (which I haven't a clue how to use) . The automatic one, which doesn't bring up the normal windows install, but brings up a Toshiba specific one...and it goes from 0% to 100% and completes every time.

If I use my Windo... Read more

A:Qosmio G10-133 - Install Qosmio Player and using recovery disk

What you need is help from your service provider who has replaced mainboard. Long time ago I heard about this and what I know is that machine must be prepared for usage: that means service must update BIOS, check memory compatibility, RAID functions are not the same, Bios, EC/KBC and DMI must be updates and rewritten. The whle notebook must be prepared to work with new hardware components.

If I?m remembering well this new mainboard has different chipset and recovery image that you try to install has actually wrong drivers inside. With other words: after mainboard exchange system drivers and the Qosmio Player need an update.

You know the whole procedure is a little bit complicated but, as far as I know, Toshiba service provider must send you instructions for Qosmioplayer update and instructions for update tool.

At the moment I cannot help you. Please call service again and ask for help. If you will not get any help there let us know.

Read other 1 answers
RELEVANCY SCORE 46

Hello everyone,

i have one system Qosmio g30-126.
I dont have the recovery cds.
I want to instal the Win7 or Win Vista.
He is not showing me the both 200+200 HDD.

plz telling to me what i do.

A:Qosmio G30-126 - Win7 or Vista instaltion hdd not showing

Hi,

You need to load SATA Drivers during the Windows installation.

During Windows Setup, it will prompt you to press F6 to specify a 3rd party storage device.
The Toshiba SATA driver will need to be on a Floppy Disk (or on USB key if you are installing Win7). The SATA Drivers can be found on the Toshiba website in the driver area.

Read other 2 answers
RELEVANCY SCORE 46

Hello

I've got a Toshiba Qosmio X300-14L loaded with Vista 64 bits.
The OS recognize my 4gb of RAM (right click on computer then properties) but when I look at the task manager,
the physical memory available is about 1800mb.

What can I do?
Thank you.

A:Vista 64-bits does not use 4GB RAM on my Toshiba Qosmio X300

Memory available is different from memory installed.
You have to figure out what's using the difference between 1800 and 4092.

Also check MSCONFIG...Boot tab...Advanced options button to see what the maximum memory is set at.

Read other 4 answers
RELEVANCY SCORE 46

Hi all!


I have a QOSMIO G20, and I put on him, with a very hard work, WIDOWS VISTA ULTIMATE.
Everything are working ok, just one thing make me troubles... I have a Gforce GO 6600 Graphics Card and when I want to enable MULTIPLE DISPLAYS, don?t want to detect my TV.

I try to change driver, but Vista say NO, THIS IS THE BEST DRIVER.
I try to change all the options from control panel of NVIDIA...nothing!

Please, I need of some help! Maybe my graphic card is damaged? Is too old?
When I connect laptop with TV, I have sound on TV, but no image.
Any ideas are welcome and I thank you!

A:Vista on Qosmio G20 - cannot enable multiple displays

>... and when I want to enable MULTIPLE DISPLAYS, don?t want to detect my TV.
Can you please describe to us what you want to do exactly and how do you do this?

Is some application running when you try to use multiple displays?

Read other 3 answers
RELEVANCY SCORE 46

Hi

I just got a Toshiba Qosmio F45 AV411 with Vista ultiimate. This notebook is famous for its stereo sound, Harman Kardon speakers with subwoofer, and Dolby Home Theater audio. Unfortunately mine has very low volume for some reason even if you turn the master volume all the way up. And if I listen to music on the highest possible ( which is not high enough at all )
The sound is hoarse like when you listen to music on very cheap speakers with very high volume.

Please help, cause even though it was second hand it still was expensive.
The shop wasnt very helpfull.

Thankx
Safiya

A:Sound problem in Qosmio with Vista Ultimate

Please make sure that the volume on windows is all the way turned up, and there should be volume buttons on the actual unit which may work independent of the operating system so make sure they are all the way up.

Also make sure in the windows mixer the windows sounds are all the way up, and whatever program your using has the volume turned up.

Read other 2 answers
RELEVANCY SCORE 45.6

After plugging in my external keyboard, both my external and laptop keyboard no longer function. The keyboards cannot type or execute shortcut commands. When clicking download links it results in downloading download.htm, pressing F results in opening the browser menu in chrome, and clicking website links results in downloading url.htm. This problem persists after unplugging the keyboard but only seems to begin after the external keyboard has been plugged in. After a restart computer use without plugging in the external keyboard results in no issues, though I haven't done so for extended periods of time. The external keyboard functions normally when plugged into another computer, though it was a Mac, so I'm not sure if the different operating system could have an effect here.
 
I've run a Malwarebytes scan already and it didn't pick up anything. I think it's likely a virus, but I can generally just use Malwarebytes to solve the vast majority of my problems so I don't know where to go from here. At the moment I'm running a Spybot search and destroy scan to see if that picks up anything Malwarebytes could have missed.
 
Any help would be appreciated, thank you.
 
Edit: Spybot managed to pick up and delete a virus called win32.downloader.gen, I also ran TDSSkiller and picked up no root kits. The problems still seems to occur.
Edit: I have used the computer without plugging in the external keyboard for several hours without issue.

A:Keyboard no longer functions after plugging in external keyboard

No replies here yet ....
 
Download and scan with Adwcleaner. http://www.bleepingcomputer.com/download/adwcleaner/
Copy and paste the log in this thread or read the instructions carefully on how to use ADWCleaner on the linked Webpage.
 
Which Brand is your external keyboard?
I am thinking there might be a driver conflict and you may be able to fix it by downloading the latest drivers from the keyboard manufacturer's Website.

Read other 3 answers
RELEVANCY SCORE 45.6

Hi All,

My laptop had a blue screen and keyboard stops working as well, I plugged the external keyboard and re-install the windows, now half of the keys are working and half dosent.

I am wondering has the kyboard damaged, I am also not sure if the I replace the keyboard will it work?

is there any settings in bios or any utility can fix the problem, could some one please advise?

Thanks
Nysoh

A:Keyboard stops working - USB external keyboard is fine

Hello Nysoh

On this virtual way nobody can say for sure what the problem is but if the internal keyboard is not working properly first step is keyboard replacement. If the problem still persists then troublemaker can be keyboard port or keyboard controller.

As far as I know BIOS has nothing to do with this issue.

Read other 5 answers
RELEVANCY SCORE 45.6

I have a Lenovo 13 inch Thinkpad X1 Carbon Gen 3. I use it in my office, plugged into a Dock and the Dock is connected to a external keyboard, monitor mouse etc. When I remove the laptop from the Dock the Number Lock still remains on - meaning that the letter keys that correspond to the number keys are locked rendering the keyboard unusable to type on normally as not all keys are available. There is NO Num Lock key on the keyboard of the laptop and I've tried all sorts of combinations of FN + F7 / F8 and FN + Insert keys to turn the Number Lock off but it won't work. I've also tried to use the On screen virtual keyboard to turn the Num Lock off using the one on that virtual keyboard but that doesn't work either! I'm at wits end and I need to use my laptop for work but I can't type on all the keys! ?

Read other answers
RELEVANCY SCORE 45.6

 After plugging in my external keyboard, both my external and laptop keyboard no longer function. The keyboards cannot type or execute shortcut commands. When clicking download links it results in downloading download.htm. This problem persists after unplugging the keyboard but only seems to begin after the external keyboard has been plugged in. After a restart computer use without plugging in the external keyboard results in no issues, though I haven't done so for extended periods of time. The external keyboard functions normally when plugged into another computer, though it was a Mac, so I'm not sure if the different operating system could have an effect here.
 
I've run a Malwarebytes scan already and it didn't pick up anything. I think it's likely a virus, but I can generally just use Malwarebytes to solve the vast majority of my problems so I don't know where to go from here. At the moment I'm running a Spybot search and destroy scan to see if that picks up anything Malwarebytes could have missed.
 
Any help would be appreciated, thank you.
 
Edit: Spybot managed to pick up and delete a virus called win32.downloader.gen, I also ran TDSSkiller and picked up no root kits. The problems still seems to occur.

A:Keyboard no longer functions after plugging in external keyboard

Try a System Restore to a time before the problem began. If you have such a Restore point available.
 
1 - Restore:

 restore.png   6.3KB
  0 downloads
 
2 - System Restore

 System Restore.png   17.49KB
  0 downloads
 
3 - Choose a different Restore point:

 choose a different restore point.png   26.24KB
  0 downloads
 
4 - Show more restore points
- Select a Restore point
- Scan for affected programs

 show more restore points.png   18.47KB
  0 downloads

Read other 5 answers
RELEVANCY SCORE 44.8

I thought that posting my experience just now might be helpful to others.

Yesterday (25-Aug-2009) my Outlook 2007 was working perfectly. I had downloaded & installed Outlook Connector 12.1 because I'd received an e-mail from Microsoft to say that the DAV protocol used for HTTP mail would be withdrawn on 1-Sep-09. I also noticed that MS had restored the POP3 service that they closed down a couple of years ago.

So I set up the POP3 account and started working with that. All OK.

Last night when I closed down, Windows Update came in and completed on reboot this morning. Outlook 2007 wouldn't start, coming up with the message: +Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set of folders cannot be opened. The information store could not be opened.+.

Nothing I did in that environment would enable Outlook 2007 to load, I created a new profile and that did no good.

So I went back to the System Restore Point made at the time of installing the Outlook Connector and everything sprang to life.

I had also tried the restore point that undid the Windows Update, but that didn't cure the problem either.

So, I'll see what happens when I reboot next time in case it had nothing to do with Windows Update.

Cheers

A:Outlook 2007 not opening after Windows Vista Update 25-Aug-09 [Qosmio G50]

Very strange?
But possibly the Windows update was really responsible for this issue? it?s hard to believe but this is not impossible?

Read other 4 answers
RELEVANCY SCORE 44.8

After making Recovery disks for this machine, I completely removed Win7 from the drive (via Manage in Computer Management (right click on My Computer). Prior to that I downloaded all drivers from the Toshiba website. I installed Vista Ultimate plus the downloaded drivers. However there are 3 conflicts in Device Manager.

1. When I boot, there is always an error message saying,
“Incompatible display adapter has been disabled: At least one display adapter on the system has been disabled because its driver is not compatible with the driver for the VGA adapter”.

There seems to be nothing wrong with the display in actual fact as the screen appears normal. But in Device Manager under ‘Display adapters’, the line saying ‘NVIDIA GeForce GTX 560M’ has a yellow conflict next to it.

2. In Device Manager under ‘Network adapters’ there is only one listed; ‘Realtek PCIe GBE Family Controller’.

3. In Device Manager under ‘Other Devices’, there are 2 yellow conflicts. One says ‘Network Controller’& the other says ‘Unknown device’. The practical effect is that I cannot connect to any wireless networks & in fact none are listed.

Any help would be greatly appreciated.

ciao,
bob

A:Qosmio X775-Q7384 - Wireless not working in Vista Ultimate 64

Okay.. Where did you get the drivers from?

The device driver, is quite possibly because the system has a hybrid gpu setup for power savings, and if you did not use the Toshiba supplied drivers, it won't work right.

Problem is, Vista isn't fully supported it seems, though 7 drivers should work.

The Network controllers easy... Go to the Reaktek site and d/l the vista drivers there, theres only like 3 choices, so i'm sure you can figure that out.

The 3rds abit trickier as you need to find out what it is... Get the first 2 solved might acttually solve the 3rd.

Read other 3 answers
RELEVANCY SCORE 44.8

Hi,
 
Everything was working fine. Suddenly, when I typed on the usb keyboard, nothing happened. So I put it in a different usb port on the laptop, and it still didn't work. So I tried the laptop's own keyboard and still nothing. I'm not sure what is going on. 
 
I tried deleting the keyboard driver from Device Manager but that did nothing. I tried searching for this problem but all the results seem to not apply to this specifically. 
 
Any help would be appreciated. 
 
Also... I'm a n00b that knows very little about computers so bear with me
 
 

A:Laptop won't recognize keyboard OR external usb keyboard

When you deleted the keyboard driver for the laptop...did you reboot after doing so?
 
Does your BIOS call for USB  boot via USB device?
 
Louis

Read other 5 answers
RELEVANCY SCORE 44

I need to connect to a Windows 2003 server via my Windows 7 PC's Event Viewer. It is a non-domain server, so I need to provide different user credentials for the Windows 2003 server. The Windows 7 Event Viewer displays this error when I try to connect
to the Windows 2003 server: Connecting as another user is only supported when connecting to a computer running Windows Vista or later.

This is not acceptable. I need to be able to manage/view event logs on th Win 2003 machine from my Win 7 desktop.  This all worked fine using my Windows XP Event Viewer and now it is broken in Windows 7. How can I connect the Windows
7 Event Viewer to view logs on a Windows 2003 server with different user credentials?

Thanks,
J McNemarJ McNemar

Read other answers
RELEVANCY SCORE 44

Hi,
 
Laptop is a Samsung R510 running Vista.
 
When it is switched on, it gets stuck on the Samsung BIOS load screen. The F2 (Setup) and F4 (Recovery) buttons don't work unless they are pressed straight away. But when they are pressed it says 'Please Wait', but nothing happens.
 
I have changed the CMOS battery, but it hasn't helped.
 

 
I have also taken the hard drive out and turned it on, still the same.  Each RAM stick has been tried on its own, and it is still the same.
 
Can anyone help?

A:Laptop Stuck On BIOS Load Screen/Won't Load Vista

Have you tried booting into Safe Mode?
 
Start tapping the F8 key immediately after pressing the power button.

Read other 5 answers
RELEVANCY SCORE 43.6

My 200Gb external hard disk is not working. I connect it, windows gives me the "bing" to tell me somethings been connected and its even in device manager. But it doesn't come up in my computer. I really need help because there is alot of family photo's on this thing that I would hate to lose. Some can probably be found in the computer, it's merely a backup of everything but I had an account deleted with about 2 hundred and the ones on the drive are the only copy's.

I've tried updating it's drivers, what now?

A:Need help, external HDD not connecting

A couple of things might be helpful here - what type of HD is it and how is it connected to the network/pc? I had simular issues with a Buffalo external connected to my network. In the end all I did was uninstall the support software and reinstall it.

Read other 9 answers
RELEVANCY SCORE 43.2

I have an acer aspire 5517 running on windows 8. I have internet explore and Firefox for browsers and I couldn't open both. When I open the Firefox it does not load but saying google.com is not responding and to check my modem or internet connection. The modem is working fine because all other phones and computers at home are connected to it and none is having this issue. When I click on internet explore it's the same thing I cannot connect. It's saying that windows is unable to connect to the internet. Now I have it plug in directly to the modem and it shows that is connecting but when I open the two browsers that I'm using it still doesn't load. Can anyone help me?
 

A:Browsers won't load while connecting to the internet.

Read other 15 answers
RELEVANCY SCORE 43.2

I already have the issue that when I put my E5570 to sleep and wake it up again that the keyboard and touchpad do not work. So I have disable the sleep options in the BIOS.
Now I run into different issues.Yesterday I booted the laptop and it hang on the DELL logo, After a while it stated that my EFI file would not be correct. Force reboot and it booted straight to Windows.
What's more annoying is the fact that the laptop boot, the DELL logo is shown and then the screens go's black, as if it's not connected. SO it looks like it hangs.BUT an external monitor through HDMI does work and show the windows logon.The keyboard and touchpad also do not work.External mouse and keyboard do work.
So pretty much I got a brick when I do not have external display/keyboard and mouse available.
When I reboot the laptop it works fine again.Am I the only one with this?Loads of issues with the laptop and wondering if I just have a faulty laptop...
Clean Windows 10 Pro install is done 5 times.Used the  DELL Command Update to install all drivers and patches.Issues keep existing...

A:Latitude E5570 - Black display, no resons to keyboard/touchpad - External display/keyboard/mouse do work

I have been spending a lot of hours in troubleshooting this week.
Diagnostics are 100% ok.
Reinstalled Windows 10 about 15 times.Installing drivers by hands, installing drives trhough the dell update management application.The issues keeps existing.
To sum the them up:- Cold boot (laptop is off) to Windows. Keyboard/Touchpad do not work. (Reboot and they work again)- Resume from sleep. Keyboard/Touchpad do not work. (Reboot and the work again)
After I got the laptop I installed 32Gb of RAM and an 512Gb Samsung 950Pro PCIE M.2 NVME drive.The drive should be support as Dell states on the product page and in the manual that PCIE with NVME is supported.
"Advanced features, like industry-leading M.2 SATA and M.2 PCIe/NVME solid state drives, provide data transfer speeds up to 4x faster over traditional hard drivers. "
In order to get the drive visible and running on PCIe I had to disable the sata controller in the BIOS.This way the drive is detected in Windows as an PCIe NVME capable drive.
Just to verify if the issues I went back to default with the delivered 256Gb M.2 sata drive and 8Gb RAM.To install Windows I had to turn the Sata controller back on.
Installed the drivers manually updated WIndows and tested.The issues do NOT occur.
Retested by installing the drivers using the Dell Update Application.The issues do NOT occur.
So I figured out that the SATA controller somehow is the guilty part for all the issues.I mean when enabled to ACHI or RAID the sleep and non... Read more

Read other 9 answers