I'm not sure if this thread goes here or in Windows 7 section----
I have a LG bluetooth headset--works with my Galaxy S5 just fine----
I'm trying to listen to my music & Youtube on my computer with it----
my P8Z68 V Pro motherboard has BT-GO
but won't recognize my headset thru the ASUS suite2---
but
Windows 7 (64bit) will.
Windows 7 detects & pairs with the LG headset no problem at all
when I go to Control Panel // add Hardware page---the LG is shown.
when I go to the paired page it shows my computer & the LG headset with the Bluetooth symbol
between them no problem------
here is my problem
the signal strength meter only shows 1 bar, if I lean right up next to my tower it will go to 2 bars
& I can just barely hear the sound in my headset.
if I go to Device Manager there are 2 yellow symbols under ""other devices"""
but no yellow up at the top under ASUS bluetooth.
the driver listed for the ASUS bluethooth is ""Atheros Corperation"" 7.2.0.65
do I need to download the latest driver from Broadcom for the yellow symbol under other devices ??
if I download Microsoft Mobile Center software will this help me even though I can just barely hear the sound in my headset ???? they do pair.
like on Youtube do I need to pull off the plastic cover off the bluetooth I/O port
why does my Galaxy S5 show full bars (paired to the computer )
& the LG show only 1 bar (paired to the computer--
Help
James
P.S. LG doesn't supply any drivers for headsets // I asked LG
I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system
It's worked out well for many of us in the past.
You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)
Apparently the range is short.
https://vip.asus.com/forum/view.asp...id=1&model=P8Z68-V+PRO&page=1&SLanguage=en-us
There is a youtube video supposedly showing you how to increase the range. I found it puzzling. There is no dialog nor onscreen captions. The guy has a tape measure and a Samsung phone. I have no idea what he is doing.
Your best bet would be to disable the weak onboard bluetooth and buy a USB bluetooth dongle.
I've done everything but stand on my head and I cannot get the P50 and the Sony to see each other to pair. I use the headset everday at the gym with an iPod Nano with no problem. With the P50 I've tried "add a bluetooth device' and 'show bluetooth devices'. In neither instance does the Sony appear. Suggestion? Mark
Read other answersHello!
I recently installed the latest version of the Toshiba Bluetooth Stack (v9.10.32T) for one of my desired applications to properly function. However, connecting my Bluetooth headphones through Toshiba's bluetooth manager does not seem to support the media buttons on the headset. These include Play/Pause and seek buttons. Before the Bluetooth stack, when I used my default bluetooth driver for connection, these controls had worked fine.
Also, there does not seem to be a specific setting to fix this in the Toshiba Bluetooth Stack Options.
How would I go about getting these controls back?
My Laptop Model : HP Pavilion 15-ab267cl My Sony Bluetooth Head Set model: Sony mdr-zx330bt I am not able to connect my bluetooth Headset to the Laptop. IN bletooth devices it's not detecting my headset
Hi, You have to allow your Sony is discoverable. How ? Please check its manual. Normally it MUST have a blue button to press. Regards.
Read other 1 answersHi !!
I am having a bluetooth adapter installed on my PC. Now I wanted to connect my Samsung HM1100 headset with it. It paired and everything but during installation of driver it says "NO DRIVER FOUND". I have tried too many times and I have also installed a bluetooth driver "SILICON WAVE BLUETOOTH DRIVER".
Actually its a dongle I'm having. So it didn't require any drivers but it won't connect to my bluetooth headset.
Help will be appreciated.
Do you still need assistance with this issue?
Read other 1 answersI recently purchased these 2 items. Hoping for a headset for my phone and my pc.
Newegg.com - Kinivo BTH220 Black Bluetooth Stereo Headphone – Supports Wireless Music Streaming and Hands-Free Ca
Newegg.com - Mini Bluetooth USB 2.0 Micro Adapter Dongle
It worked perfect with my Andriod, but the Dongle does not seem to want connect with the headset. It seems the Dongle was not made to work with Windows 7 64bit. The bluetooth dongle will recognize the headset when I try to sync them, but will not actually let them connect for any audio. Here's a pic of the error.
http://i35.photobucket.com/albums/d1...ch1999/ds1.png
I've tried reconnecting it multiple times. Been searching online for the past few hours for drivers and programs to get it to work, but no such luck. Any help will be appreciated.
griffiths,
Welcome to SevenForums.
http://www.sevenforums.com/tutorials...en-forums.html
Next, I suggest you check this site for compatibility and certication of your products.
Next time, I recommend checking before purchase.
Windows 7 Compatibility: Software Programs & Hardware Devices: Find Updates, Drivers, & Downloads
I have a RocketFish Bluetooth 2.0 EDR Class II Wireless USB Adapter, connected, and installed. Drivers are in and the device is working.
But when I use the Windows Bluetooth device app, and search for the headset, it's not finding it.
What am I doing wrong?
Thanks.
Hi,
I've been trying to setup my new laptop which is Dell XPS 15 (9550, i7, FHD, Broadcom WiFi + BT) running Win 10 Home Edition, to pair my android cell phone and use the laptop Mic and Speaker act as bluetooth headset, however been searching around on google and some said this features only exist on Pro and Enterprise version of Win 10, so is that true?
If it's not then may I ask if anyone has success on doing so?
I am able to pair it but the option to use pc as bluetooth headset isn't exist.
Thx!
Hey guys, im not the best with computers so bare with me lol.
I just bought a set of Bose Soundlink 2 wireless headphones and cant seem to get them to connect to my PC.
Im running windows 7, and when i select "Add a device" under the Bluetooth tap, it keeps searching for devices... and my headset keeps blinking in "pair mode" till they shut off. I can successfully connect them to my phone, and my girlfriends laptop which is running windows 10. Is this a common problem with windows 7 not connecting with Bluetooth headsets? Any help would be much appreciated, ive spend too much time trying to figure this out, and Bose support was no help obviously. Thanks again for any input, really would like to figure this out
Travis
Welcome to our forum tjessop.
Do you have your usb 3.0 drivers installed?
If not your motherboard should of come with a CD that has the usb 3.0 drivers.
Are you plugged into Usb 2.0 or 3.0?
Does your Bose head set need drivers?
Did your head set come with a CD or DVD?
Boot your PC and then plug in your head phone and see if Windows 7 picks them up.
If not, boot your PC and then plug your head phone in and see if Windows 7 picks them up.
Right tick on your volume icon (lower right) and select (Play Back Devices). Do your head phones show up there?
That is about all I can think of.
Jack
ok well ive had no luck troubleshooting it in other sections in the forum
ive got a bluetooth headset. ive had it working once. but its a hit and miss sometimes it will BSOD. anyway i realised it was the software and hardware with the bluetooth dongle. ive now swapped over to an asus usb-bt21 and it detects everything hard to connect sometimes.
ive been having really horrible and upsetting constant BSOD trouble with this.
please help me to see what this is
STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL Usual causes: Device driver
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Code:
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp1_Windows_NT6_BSOD_jcgriff2MINIDUMPINFO[1].zip\Windows_NT6_BSOD_jcgriff2\Mini082810-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6002.18267.amd64fre.vistasp2_gdr.100608-0458
Machine Name:
Kernel base = 0xfffff800`0204b000 PsLoadedModuleList = 0xfffff800`0220fdd0
Debug session time: Sat Aug 28 00:34:05.429 2010 (GMT-4)
System Uptime: 0 days 0:09:27.947
Loading Kernel Symbols
...............................................................
................................................................
.................................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
********... Read more
Hello all, i got a situation right here. im using an old LG KS20 with its default OS, WinMo 6 and i happen to have 2 stereo (A2DP) devices which are Philips SHB7100 and Fujitsu SPK-796.
so i pair them to my older phone, LG KU990 Viewty and both devices work perfectly. Now i'm trying to connect either one of them to the KS20 without any luck. So the bluetooth headset and speakers are working right.
I discovered that there are "handsfree options" in bluetooth settings that has "authorization" "authentication" and "encryption". ticking or not ticking any of them did not give me what i need.
so basically the problem is: i can connect both devices as "hands-free" and it asks me for pairing code when i pair both of them, but i cannot connect the "high quality audio bluetooth". it says connection failed, obviously because it didn't ask me the pairing code, which is necessary in the first place.
so anyone here facing the same issue?
Hello,
I have a bluetooth dongle creative CB2436 and it's version 1.2
so I wanted to add My nokia BH-503 bluetooth headset
While adding this problem occured
this message
"Adding the device failed resulting in an unkonwn error. The reported error is: 0x80004005.
by the way I have bought my laptop new Toshiba A500 series and there was no bluetooth in it
and when they shipped it to me there was no CD's with it but said to make recovery CD's so I made them buy a wizard
Did you recieve a driver or installation disc with your Nokia headset?
Read other 9 answershello
i have a bluetooth headset from samsung HF740T
and i cant have it work in my laptop with windows 7 professional 64-bit
i cant find a driver for it
when i try the troubleshooting it say it is unable to automatically fix all the issues found { Bluetooth peripheral device dosent have a driver }
how can i make it work pleas help me
and sorry for my bad english
I have a SONY MDRZX770BT Bluetooth Headset which I am trying to pair with my Dell OMNIPLEX AIO PC. All seems to go well, until I bring up the 'SOUND' screen from Control Panel. The headset, which was reported as successfully added, and ready to use, does not appear on the screen of playback devices.
All related BT and sound devices on Device Manager are shown as working properly, and the headset appears on the Devices and Printer screen. I also checked that all BT Services are running.
I was able to install, and use, the headset on my wife's computer, so it is not a defective device.
I checked the SONY web site for possible driver updates, and no downloads are avaiable for this device.
Also, I had a previous (Philips) BT headset working on this PC, so the BT software seemsOK.,.
What have I overlooked?
I have a Surface Pro2 running Wndows 10 1511 10586.17. I want to add a Motorola H730 headset. The tablet doesn't detect the headset. Any ideas why?
Best regards.
I have a Motorola H500 Bluetooth headset and its connected to my laptop computer. I wanted to know if there is any way to use the headset for the mic, and still have my sound come out the computer speakers.
Thanks--
Hi and Welcome to TSG!
If you go to start > control panel > sounds and audio,and then look through the tabs for "input device" and choose your bluetooth headset.
Kind Regards
Anthony
My BT headset doesn<t respond anymore to pairing. It is fully charged and turns on, but my phone and tablet cannot connect with it although it is paired Before it was working fine with both. Is there any way to test it(BT), to see what the problem is. It is a Jabra.
TKS
eddywa
It is possible that the pairing has been corrupt. I would consider deleting the current pairing and then try to repair it to the phone. If that does not work you can try to pair it to a different bluetooth if you had a spare or possibly a friends. If it connects then it is a good chance it is a defective bluetooth.
I was wondering if it is possible to use bluetooth headsets as a cheap alternative to radio microphones - would I be able to do this (for voice recording purposes), and would I need any special software to make it work?
I recently added a 320 Plantronics head set to my computer array along with a generic Bluetooth USB adapter so I can listen to MLB (baseball). I got the pairing done successfully and the tests work as do all Windows beeps etc. However, I cannot hear other sounds that normally come thru my speakers such as baseball, music etc that play thru Windows Media Player. Any suggestions? The Bluetooth adapter does not specify Vista (my op sys), but since I hear the Windows chimes etc, shouldn't I also hear everything else? Thanks.
Dave
[email protected]
Hey guys was just wondering what are the best Bluetooth headsets out there for internet gaming voice chat. Thanx for any help.
Does anyone know of a bluetooth headset that either does not have the annoying blinking LED or the ability to disable it? Thanks
Welcome to TSG!
I have moved your thread to where I think you may get more help!
I have been trying to get my Plantronics bluetooth headset working with Windows 7 without any luck. I want to use it with a 3CX softphone to use it with a Google Voice number.
At first I was able to add the headset to "Devices and Printers" but could not get any audio in or out of it for the softphone. A wired headset works ok. I searhed here and read a post that someone suggested BlueSoleil 6. I installed it and it seemed to pick up the headset, but that didn't work. I even installed BlueSoleil VOIP, but that thing is for Skype. While it was installed, I checked my "Devices and Printers" and it was not listed anymore. So, I uninstalled BlueSoleil. I was able to add the headset again. Still didn't work. I also read somewhere else to install the WIDCOMM Bluetooth Software. It could not detect my headset. The headset disapeared from the "Devices and Printers" window. Now I can't e ad the headset. When I try, my Brother Laser printer is listed to add. I already have had it installed for some time.
Anybody have a clue of how I can get this to work?
I got my bluetooth headset added once again, but still can't get it to work.
Read other 1 answersThink this might be the best place for this.
A little annoyance here. I got a Moto H800 bluetooth headset I would like to use on Ventrilo while gaming and it just is not connecting. To many variables? Lets narrow it down
First, the basics:
System: WinXP-Pro SP3 All Updates
Bluetooth: USB ISSC Bluetooth EDR Adapter [ISSCEDRBTA]
Using XP Bluetooth Stack
Using the bluetooth devices dialog found in Control Panel I add the H800 by pressing "ADD", checking "my device is ready to be found", pressing "NEXT", waiting for windows to find the h800, clicking on it then pressing "NEXT" again, select "use passkey from my documentation" which of course is 0000, then press "NEXT" one last time.
At this point the h800 flashes violet and blue, usually indicating a connection. However it quickly turns to a flashing red. even though it is paired, it will not connect to the pc.
Wondering if I did something wrong?
Hello,
I'm running win 8.1 and want to use a bluetooth headset. I'vs been searching for a day already for solutions in vain. Let me explain the scenario.
I have Dell Vostro 3460 notebook with Win 8.1 Core 64 bit on it. I have bluetooth enabled, I can connect to bluetooth devices (phone). My headset is a noname one but it still works on other machines (works with phone, works with Ubuntu).
In windows I can pair the headset but that's as far as it goes. I cannot select it as audio output device. I learned that for it to work I need to have an "audio sink" serviceat the bluetooth device. Unfortunately the only service my driver shows is "handsfree" (transleted, not sure if this is the proper english name).
I tried updating bluetooth drivers (various) but none of them made any difference.
Can anybody help me in getting this working?
Thanks,
Mikl?s
Hey all, i was hoping someone can recommend me a headset. im kinda new and am not looking to spend much, But i find it hard to figure out which one will work for sure. Bluetooth, wired? I have been eying this NoiseHush N700m but then i compare it to the likes of say turtle beach options and well i feel like maybe i should just spend a bit more, as you can see i have been given descions that i simply cannot make on my own! lol. I am however interested in your take on headsets or which ones you use. Most of the affordable ones out their seem to be made of rather cheap materials, is their a premium options?
Read other answersI have a bluetooth headset and it is showing as k10 when I try to install it, but it keeps saying there is an error and I am unable to install this correctly. Where do i locate the drivers please?
Read other answersI'm new to this notebook and trying to hook up Bluetooth headphones to it, is it possible?
Hi, It does not have built in Bluetooth, no BT on its specs: http://support.hp.com/au-en/document/c03511031 If you wish, pleae try a USB-Bluetooth dongle/adapter which is similar to the following one: http://www.officeworks.com.au/shop/officeworks/p/targus-bluetooth-4-0-usb-adaptor-taacb75au Regards.
Read other 1 answersHey i'm new to the forum and wasn't sure whether to post this in Hardware or vista so anyway.
I am currently running Vista Home Premium on a brand new HP pavilion notebook with inbuilt bluetooth. (my avator)Vista and the pc have been great for what i need them for however i recently wished to connect my Motrorla H350 bluetooth headset to my pc for use with MSN messenger voice recognition and other software. The device paired well and is visible in the bluetooth devices window-
However now the problems start. I have had trouble getting the device to act as my computer microphone and speaker. this is due to the fact that it is not visible in my sound control panel under playback devices
or recording devices
I suspect it might be a driver problem and so here is a screen shot of the hardware and drivers related to bluetooth on my pc-
If anyone knows how to fix this problem it would be much appreciated.
I have a Blue Parrot B250-XT. I would like to be able to use it on my computer for Skype for Business/Lync phone calls. I am able to pair it to my computer. Once paired the computer tries to install device driver software, however, it fails to do so everytime so I am unable to use my bluetooth device. Am I just out of luck or does HP offer a driver for bluetooth headsets. I was able to connect my bluetooth printer and use it so my computer's bluetooth is operational, it just doesn't work for my headset.
Read other answersHi all,
I just got my Bluetooth headset I had been waiting for...the Plantronics Discovery DSP 645. Paired it w/ my Treo and Thinkpad T60p. Everything worked great except when it came to the driver(s?).
I run Vista Ultimate x64. I shot them an email, but I'm betting on getting better help here. Do I even need a driver? Since it was trying to install one, I would imagine so. Everything else went perfectly. All the x64 Bluetooth driver sets for my Thinkpad were promptly installed. That's the reason I'm asking if I need a specific driver for the BT headset.
Should be awesome using Skype with.
Thanks guys!!
Let Vista install a driver for it and see if it works!
Read other 2 answersI have a bluetooth headsetit is succesfully added to bluetooth devices.my problem is , there is no sound when I play music. As for bluetooth driver, it is downloaded from hp website. here is an images might give you hints
Read other answersHi, I recently got this new WLAN Bluetooth Combo Adapter so that I could have the option to use bluetooth devices with my laptop. I'd connect my Sony MDR-XB950BT bluetooth headset and use it to talk to friends on Skype. When I look in my sound devices, there are normally two devices my headset connects with: "Headphones" and "Headset". The headset option is what lets me use my mic. However, now "Headset" displays as "Disconnected" and right-clicking then pressing "Connect" doesn't help. When I unpair then re-pair the device, it takes forever to download it's drivers, then I see that there is no "Headset" option in my sound devices at all! It reappears upon restart, but again as "Disconnected". Also, now when I connect my headphones, the "Headphones" option also displays as "Disconnected", but unlike the "Headset" option I am able to right-click and press connect and it will then connect. All my drivers are up-to-date and when searching for my new WLAN Bluetooth adapter I was told by an HP expert (who was a great help by the way) that this one was indeed compatible with my laptop model. It worked at first, but now I'm having these issues. There is no answer anywhere online that works for me. Any help would be greatly appreciated. Thanks in advance
Read other answersi'm in need of a good idea concerning my bluetooth headset.
using skype i bought a plantronics voyager 520 to use it also for my mobile. vista ultimate 64 nicely installed the device, broadcom is also on the system , rights fo connection were given - well the system worked well until - i have no clue. I did not chage anything but wenn I start skype and mybt headset it is recognized, the software is installeb, sound is on, mcrophone and earplug is checked in the bt device manager. wenn i start the skype test i hear a beep and then background noise but no voice or sound. sound and mic monitors are moving - it seems as if that something in the system blocks the noise.
has anybody experienced that problem or - even better - any ideas about a solution?
thanks in advance
Is there a place I might find universal over-the-head pieces?
I got an iogear headset that has only ONE ear piece available - it keeps falling off. They have no other choices, apparently.
Not even Plantronics offers more than one choice for their BT headset. How disappointing! If I can't find a better way to secure it, I'm going to send it back. Otherwise it fits great. I just always seem to have a fight with over-the-ear hooks.
I have a Plantronics headset bluetooth that will not link or pair to my Acer Aspire ATC-705-UC52. Support was NOT able to help me. Any suggestions?
Read other answersI have a a Dell Latitude E7450, running W7 Pro (64 bit). I recently bought an August EP650 bluetooth headset and tried to connect. It does not. It is recognised in 'Devices and printers' and drivers are installed and when I go to 'Sound' I can see it, but it is disconnected and nothing can make it connect.
I searched the internet for 2 days and tried various things. I understand I have to go to 'Device and printers' -> right click and select 'Service' and click on 'Listen to music' or 'Forward VoIP to Handsfree'. I click on 'Listen to music' - nothing happens. No message, just nothing. I checked 'Properties' -> 'Services' and 'Headset' is selected as a Bluetooth Service. I tried everything suggested on forums.
I went to Dell drivers and could see a new bluetooth driver issued on 01.08.17. Downloaded and installed it. The fun started then as the headset would not install correctly, I hade like 15 issues with 'Bluetooth Peripheral Device'. Nothing I did installed the correct drivers for 'Bluetooth Peripheral Device'.
I gave up and called Dell, but they see it as a software issue (yeah! their software!!!) and want to charge me the earth for helping me with no guarantees.
I found the restore point and rolled back to before I installed the new drivers. Device manager is now not complaining, but still nothing works.
BTW - the headset connects to my mobile no problem. So ... Read more
shansue,Did you PAIR the headset with the Computers Bluetooth? Click the links below for troubleshooting and resolving bluetooth issues. Also, if needed you may want to update any drivers for your system.Dell Latitude E7450 Drivers, Downloads and ManualsGuide For Pairing and Troubleshooting Bluetooth DevicesBluetooth Troubleshooting and Usage GuideFAQs - Bluetooth
Read other 1 answersSeems like I'm having similar issues to others here after a quick search. The one page I've found that said it had answers has a link that comes back saying I cannot access it.
I have a Jawbone Prime that I wish to use with vent and skype but cannot get the bluetooth device peripheral driver to install. I have attempted using the Broadcom software linked in most posts but it does not do anything but remain on the searching for devices page. I've also attempted to use the Asus software that is recommended in some posts but although it installs only provides me with a small window saying there is no bluetooth device present.
The computer finds the headset, but I cannot get it working. Can someone help me?
What bluetooth receiver do you have on your computer?
Read other 8 answersI'd like to know your experience. I am going to have to use Webex for my university classes this fall and they told me Bluetooth isn't supported.
We know that just means they don't talk about it and won't help you use it. lol
I found a link to a pdf on it. I am going to try to set it up tonight.
http://edtech.mst.edu/documents/webex/UsingBluetoothWirelessMic.pdf
Just wondering if anyone else has gotten it to work.
Thanks
Please help.
I have a Satelite L655 Laptop, and ol headphones with wire broke... I bought new headphones AEC BQ-605 Bluetooth Headphones... because my laptop does not have Bluetooth compatibility, I bought a Bluetooth 4.0 USB adapter for my computer. I also bought a new cell phone recently, with Bluetooth capable. The cell phone connects effectively to computer, both can pair. When I try and connect headphones, though the signal for headphones show up on computer bluetooth scan, I can't seem to confirm they are paired. Furthermore, the headphones (being SMART headphones) have audible status updates, and it will say "Waiting to Connect."
When I tried playing something from computer (movie, or online media), the audio for the media plays through the computer's speakers, not the headset.
After looking around on google for solution, something was mentioned about installing a driver to help send the soundbytes to the bluetooth... but I don't know what this means, or how to do this. Please explain how I can solve the solution in a manner that a computer illiterate would understand.
Thanks in advance!
PS... if needed I can attach screen shots later... hoping to see if my explanation was enough.
Welcome to Windows Seven Forums.
Do you still need assistance with this issue?
I have a Sony MDR-10RBT bluetooth headset that used to work with my HP ZBook 15 G2 laptop. I'm not sure what happened, but it no longer works.I can pair the headset, and it shows up in the Devices and Printers window.However, when I double click on the headset's icon and get the window where I can click on Listen to Music or Forward VoIP Calls to Handsfree, they are both greyed out. If I look in services:Bluetooth Media Service: not started, automaticBluetooth OBEX Service: not started, automaticBluetooth Support Service: started, manual If I try starting Bluetooth Media Service, I get an Error 1053. I have updated the Intel Bluetooth Driver for 7260/3610 WLAN (American, International) to 17.1.1504.518 Rev.A29 Jun 2015. I'm not sure what that replaces, since when I look in the Device Manager, under Intel Wireless Bluetooth 4.0 Adapter, it still says 17.0.1401.422. Any suggestions of where to look next would be appreciated.
Read other answersI got a Sony SBH-60, Initially it got connected with the laptop using Bluetooth, but later days it wasnt getting connected with laptop hence i removed the device and try to pair again i couldnt discover the device at all.
My laptop runs on Windows 10 and bluetooth chip is from intel.
So tried possible remedies already like
1) Updating drivers
2) Uninstalling/ installing drivers
3) Changing Bluetooth support service (automatic)
Everything was done still the headphone was not discovered.
I tried to run Troubleshoot in Hardware and devices
I got this image
I tried to restart the system but still this troubleshooting was shown.
Kindly help. Thanks in advance.
I'm trying to make a stereo bluetooth headset work on my HP Vista32 Desktop.
I can pair it, then connect it, the device changes from speakers to the headset in my "Playback devices" window, but I get no audio through the headset. After about a minute, the playback devices changes back to my speakers
and the headset shuts off.
I've checked all of the drivers in Device Mgr...all are installed and working properly. I've also done
attempted updates on all of the involved drivers. I get messages saying the drivers are up to date in all cases.
It appears that the drivers (Blue radio & enumerator, headset in sound, video and game controllers) are installed
correctly, but the audio channel is not cut through.
Has anyone had in experience in this problem???
I use a small program called keep alive to stop my headset turning off during breaks as when it restarts I was loosing a couple of seconds sound
Here is some info on it
Keepalive - Wikipedia, the free encyclopedia
Win7 sees my bluetooth device. It shows the services as available and (via checkmarks in the boxes) selected for use. But my headset never shows up in the Playback devices and no sound comes through the headset.
Any ideas?
I have a problem with my Plantronics 360 bluetooth headset device. When I used windows XP, the headset could normaly connect to my MSI EX 610X Laptop with build-in bluetooth device. Now, I'm using Windows 7 x64. The headset also normaly connects to the laptop, but the sound that comes from the microphone in headset is awful, just "zzzzzzzzzzzzzzzzzzzzzz" as I speak. And the sound in speaker (of plantronics) is also just "zzzzzzzzzzzzzzzzz"... What should I do ? Pleae, help me ! I hope you understanded me
I just bought a Philips SHB9100 stereo bluetooth headset for use with my computer (HP IQ506 Touchscreen with Win7, SP3), and I cannot hear anything wireless.
I can see the headset on Devices and Printers, but can hear nothing without the audio cable.
The install instructions said something about a 'connect' button, but I have never seen this during my install.
I successfully installed on an ASUS T100, with no problems, but this has me stymied. Didn't see any 'connect' button here, either.
Re-installed HP bluetooth driver(s), to no avail.
I have found no applicable updates on HP Support.
Computer says the device is working properly.
No sound is coming out of my Bluetooth headset even though it is paired successfully.
Is there a driver or update that can be installed to get them working?
