Over 1 million tech questions and answers.

No M.2 port in IdeaPad 520 15-IKB?

Q: No M.2 port in IdeaPad 520 15-IKB?

Hi, I bought the IdeaPad 520 15-IKB, part number 80YL00P8US, and was planning on upgrading the HDD to an SSD. I've got it and opened it up, only to find there is no M.2 port, other than the one the WiFi card is plugged in to. I realise I can still use a SATA SSD and remove the existing 1T HDD, but then I would have to either not use the 1T drive, or get a ODD caddy, and maybe even a new internal board to connect it.Am I just missing the M.2 port? I didn't look on the underside of the system board, would it be there? Any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: No M.2 port in IdeaPad 520 15-IKB?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 48

Hi, both USB ports on my Lenovo Ideapad 100 are not working. What can i do?

Read other answers
RELEVANCY SCORE 48

I recently bought an IP 520 i7 7 gen 15.6" machine. It comes with a type c port. I want to know if I can plug in a type c to vga adapter and use another monitor on my laptop. I bought an adapter from Amazon and I tried plugging it into the c socket but that does not work. However, when I tried the same adapter on my sister's Mac , it works just fine. Now my question is, Is the c port just for charging and does not have I/o pins , or my USB c is damaged ?

Read other answers
RELEVANCY SCORE 47.2

Hi,I bought new Ideapad 520s-14ikb. it has usb Type-C 3.1 port.I have a question: what can i do with this port? does it work like charger?thanks for answers

Read other answers
RELEVANCY SCORE 47.2

Hi Everyone, I have a Levnovo z510 i5 @2.5 GB running windows 10.The usb ports gets disconnected on their own.I have to place my laptop on the floor to acess the pendrive .Also, sometimes, it just doesn't recognize and gives this error 'Device has malfunctioned!' Kindly provide help. 

Read other answers
RELEVANCY SCORE 46.8

The charging jack pin in my laptop got a little bit loose and tends to not connect with my adapter, loosing connection when I slightly move the laptop etc.I still have over 1 year of warranty, but after my last experiences with Lenovo service (waiting over a month for a **bleep** charger) I'd rather pay to have the jack replaced. But there are no charging jacks for this model, can't find anything anywhere (not only this model, other ideapads are also affected). Some people suggest using some Asus charging ports and trimming their legs etc, but I'd prefer some "real" method. I also don't want to loose my warranty. Is there any way I can get it replaced (even for money) without loosing the warranty? I think I could even do it myself because I've done similar things in the past (soldering pins on micro usb plugs etc) but I just simply don't want to loose my warranty, nor to wait a month without my computer (and I'd possibly get a negative response claiming it's my fault).What would you do in my situation?

Read other answers
RELEVANCY SCORE 46.8

THE FLAP (COVER) OF THE RJ45 ETHERNET PORT OF IDEAPAD 500 HAS BROKEN DUE TO MECHANICAL STRESS .IS THERE ANY SOLUTION OR ANY WAY TO REPLACE THE FLAP?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 













Solved!

Go to Solution.

A:Ideapad 500 - FLAP OF ETHERNET PORT BROKEN

Hi Himanshubhusan ,
 
Welcome to the Community Forums.
 
Item C (page 84 and 85) from the hardware manual for Lenovo ideapad 500-14ISK/ ideapad 500-15ISK have those as miscellaneous parts listed with its part number (page 101) for replacement part.
 
Hope this help answer your query. 
Update us .
 
Regards
 

Read other 4 answers
RELEVANCY SCORE 46.8

Im new to USB C port and mini hdmi. I need to connect 2 monitors with extended wiew. Any ideas?Its an ideapad 720s.  

Read other answers
RELEVANCY SCORE 46.8

The on page 7 of the user's guide that came with my new laptop it says that my Ideapad 320-15ABR, "supports USB 3.1 (Gen1, Output 5V ds, 0.9A DC)".  I purchased a SanDisk Ultra Type-C 3.1 flash drive.  However, when I tested the drive it did not perform any better than a Type-A 3.0.  The attached photo shows the results of benchmark tests on both drives.ATTO Disk Benchmark results I also did some crude tests by moving large files to both drives and clocking the time it took to transfer the file.  Transfer time to and from both drives was about equal. I called Lenovo Technial Support and spoke with John.  I gave him this information and, after a minute or so, he told me that my laptop did not have USB 3.1 and that the documentation was wrong. I find this hard to believe.  So my question is does the Lenovo Ideapad 320-15ABR support USB 3.1? Thanks in advance for any replies. 

Read other answers
RELEVANCY SCORE 46.8

Kindly I need help with the following issue from Lenovo representitive.I am using Lenovo Ideapad Y700 (Gaming Laptop) bought in July 2016, one of the USB ports which was working for first 2 months stopped working suddenly. Since then it is not working. When I connect USB or Mouse it does not work anymore. I have tried to disable the usb ports & reinstal the drivers after uninstalling them but nothing has worked for me. Kindly let me know what is the best solution for this issue.RegardsJunaid

Read other answers
RELEVANCY SCORE 46

Can I use my usb-c 3.1 gen 1 port for loading my laptop from a powerbank?

Read other answers
RELEVANCY SCORE 46

Hello, Is it possible to change the hdmi port? I think the current one is hdmi 1.4 and I want to be able to use 4k resolution at 60hz which requires hdmi 2.0.1.4 hdmi can support 4k at only 30hz which is pretty laggy. Thanks.

Read other answers
RELEVANCY SCORE 45.2

Hi everybody. I have a Lenovo V310-15ISK, and I would like to try a eGPU solution in order to improve the computer performances. Has my computer a thunderbolt port? If not there are other solutions for my computer to get working with an eGPU? Thank you.

Read other answers
RELEVANCY SCORE 45.2

Hello, I recently ordered an Ideapad 720s (13-inch). Lenovo web site mentions "*Connecting to a display requires a USB-C to HDMI or DisplayPort cable, depending on display interface." I was wondering I should buy a USB-HDMI cable or an adapter to connect this laptop to an external display. Does anyone know whether the Ideapad 720s (13-inch) model supports native HDMI through a USB port, namely the HDMI Alt Mode for USB Type-C? (as specified in https://www.hdmi.org/manufacturer/HDMIAltModeUSBTypeC.aspx) Regards,Franky

Read other answers
RELEVANCY SCORE 45.2

Hi everybody. I have a Lenovo V310-15ISK, and I would like to try a eGPU solution in order to improve the computer performances. Has my computer a thunderbolt port? If not there are other solutions for my computer to get working with an eGPU? Thank you.

Read other answers
RELEVANCY SCORE 40.4

I have suddenly gotten this on my main computer. (Windows XP)
A previous techguy thread (expired) said to check my dns numbers with "jpconfig /all"
However, my computer will not allow me to run that program in safe mode.
Is it a bug issue... or will that program only run in full mode?
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Dear mulebit,
It actually is " ipconfig /all " i.e replace" j"with "i".Please go to command prompt under Start--> Programs-->accessories. No need for "safe mode" to carry out this task. Can you kindly provide details of your computer specifications? Are you using a third party firewall and if so which brand? What security software are you running?
 

Read other 3 answers
RELEVANCY SCORE 40.4

Hello all. I was talking on skype and lost internet connectivity while talking. I received the error above (Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message). I am running a laptop with windows XP and IE 7 and my antivirus is AVG and I also have Ad-Aware.

I'm not much of a computer person but I did some research online and tried a few things: I turned off the option on skype's advanced settings for it to listen on Port 80 and then rebooted. I also ran a command, 'netstat -aon' and did not find a listing of 1270.0.1:80/443 or 0.0.0.0.80/443 which seems to imply that nothing should be affecting port 80 or 443.

I also downloaded firefox and it cannot access the internet either. The only way I'm able to access the internet at the hotel I'm located at was to call the hotel's tech support and they had me go into the LAN settings of internet options and manually select port 8080.

Any more suggestions would be greatly appreciated!

Thanks,

Mike

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Some info on common ports used, http://www.chaminade.org/MIS/Articles/Fire...ortSecurity.htmI don't know much about connectivity problems...but it seems to me that...if you never had this problem before and your system connects properly outside of this hotel...the hotel/location may be the problem.Worth a read, IMO: http://en.kioskea.net/forum/affich-37752-c...on-the-internetLouis

Read other 4 answers
RELEVANCY SCORE 40.4

I am a beginner really and got this message after eliminating (hopefully) a prgram called Antivirus Action from my computer. I can't get on the internet because I keep getting this message. Any help would be greatly appreciated!
Mike
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Open Internet Explorer. Click Tools > Internet Options > Connections > Lan settings > Proxy server > Advanced. Delete the proxy server settings under HTTP, HTTPS (secure) and FTP (and Socks, if any). Then, under Proxy server, uncheck all boxed.

If running Firefox too, disable proxy server.
 

Read other 3 answers
RELEVANCY SCORE 40.4

Hi

Please help i cannot connect to internet explorer!

I am getting the error message

Check the Firewall settings for HTTP port 80, HTTPs port 443 and FTP port 21.

My provider is tiscali and i have done the trouble shooting with them to no avail, Also tried to disable the Norton firewall functions and still didnt connect. My broadband connection is showing excellent between the router and pc with both wireless or with the lead.

I have Spybot and Ad-aware on my computer and norton internet security 2006.

Do i have to clear the Firewall settings for these ports or can anyone help me .... please!

Thanks a million

Angela
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Read other 6 answers
RELEVANCY SCORE 39.2

Well, this has me baffled. My Bell Internet Security Services Activation (I just installed it on a computer not used for some 4 or 5 months) popped up a window saying "Waiting for Internet connection"...and waiting and waiting. But my Netgear wireless connection to the router in the house indicates "very good" signal strength, which I thought meant I was connected. Obviously not!

I tried opening IE. "Internet Explorer cannot display the web page" (much as I expected)

Clicked the button which was showing on the IE cannot connect page "Diagnose connection problems" and followed the instructions. The final diagnostic is "Windows cannot connect to the internet using HTTP, HTTPS or FTP. This is probably caused by firewall settings on this computer. Check the firewall settings for the ports HTTP...etc." Where on this earth are they?!

I checked the Windows Firewall settings and found it "off (not recommended)" so I switched it on.

I re-ran the diagnostic on the IE page and nothing has changed.

My question is:

How do I check the settings for HTTP port (80) and HTTPS port (443) and FTP port (21)? Also what do I set them to?

Many thanks, in advance, for a solution to my problem!
 

A:Solved: Help! Settings for HTTP port (80), HTTPS port (443), FTP port (21)

So you just installed an Internet Security Suite which has a Firewall built-in and then you enabled XP' built-in firewall? I am baffled as to why you would do that. The new software you installed has to be blocking it somehow. I would search their website for known issues.
http://www.securityservices.sympatico.ca/ssp.do?lang=en

Or just uninstall it and use something different.
 

Read other 3 answers
RELEVANCY SCORE 39.2

Hi,

I saw this problem listed, but My issue is a bit different and the previous solution didn't work for me.

Please forgive me if any of my posts offend, as I am new to this site. I don't intend to be rude, but my ignorace may anger some. Also forgive the length of the post, I wish to be thorough as to avoid getting possible solutions that I have already tried or are not relavent.

I recently had some repairs done on my computer which involved reformatting my hard drive and when I got it back started having trouble accessing some internet sites. Unlike the previous person's post with this issue i can still access the internet and 95% of sites, but a select (and seemingly random) few give the IE cannot access website error. When I run the networking Diagnostics for Windows XP get the following error:

Check the Firewall settings for the HTTP Port (80), HTTPS port (443), and FTP port (21)

The only firewalls I know of on my computer are Windows and my router (both of which I have disabled) i have also tried Firefox and it craps out at the same exact sites.

In addition to selected sites, some third party programs are having trouble accessing the internet. This includes Nortons Installer (I haven't been able to install my antivirus yet because of this error) and I haven't been abble to register Microsoft office after I installed because it cannot access the internet for ID Key Verification.

I have tried turning off all LAN proxy settings, and power ... Read more

A:Firewall settings for the HTTP Port (80), HTTPS port (443), and FTP port (21)

Read other 8 answers
RELEVANCY SCORE 36.4

Hi ,         We purchased 3 lenovo ideapad 110-15ISK Laptops (ideapad). in that i installed windows 7 professional os. i am trying to incre,decrease screen brightness(fn+f11,fn+f12). but brightness control buttons not working. how to control brighness part.Now brightness is very high. Because of this brightness i am getting eye pain. So Please provide me solution for brightness control. my mail id : [email protected]  Thanks.  

Read other answers
RELEVANCY SCORE 36

Hi
 
I got a 2nd hand Lenovo Ideapad 100S. It came with Win10 installed but had someone elses profile and data. 
(I am not sure if it originally had Win8.1 when it was shipped, there is no rollback option anymore)
 
My preference is to wipe the current installation completely by downloading Win10 and installing a clean copy off USB. 
 
I also usually prefer to delete all partitions, including recovery because future reinstallations can be done from scratch via USB. (I don't need the option of reinstalling from recovery partitions , the extra space is more important)
 
I see a warning in the user guide however .....
"Do not delete or modify the Recovery Partition on a WIMBoot-enabled computer. If the Recovery Partition is deleted or modified, you may not be able to restore Windows to the factory status. For computer models on which WIMBoot is enabled, deleting the Recovery Partition may cause Windows to fail to start. How can I determine whether the Windows running on my computer is WIMBoot enabled? WIMBoot technology is normally enabled on copies of Windows 10 Update running on SSD (or eMMC) -only computer models."
 
What is the best way to do this?

Install a clean copy and remove the partition by booting off a USB, or should I not do this?
Via Settings: settings > Recovery > Reset this PC > Remove everything, or
settings > Recovery > advanced startup > Reinstall from USB

Which of t... Read more

A:Ideapad 100s - Win10 clean installation on ideapad...

 Hi larrens , 
 
 
Welcome to the Community Forums. 
 
It's a good thing you posted first before proceeding with any clean installation. 
Not sure what the Machine Number is to verify the details and specifications of your system.
 
But if you have a pc with a Windows Image Boot (or WIMBoot) you may not want to choose a clean installation. 
This new deployment of installation is compressing part of a big OS file so that you can have an operating system that can only take small spaces intended for small storages (SSD).
 
Best option to wipe out previous owners profile is a have a fresh out of the box image is using the Puch button Factory reset (Novo key similar to Item 7 page 1). Simply shutdown the system and use the button to turn on, System Recovery option would provide One key recovery from initial backup to do it. 
 
WIM boot are usually created thru OEM depot authorized by Microsoft . DIY for WIMboot maybe a bit complicated.
Click on underlined links for further review. 
 
Hope this answered your query.
Update us. 
 
 
Regards

Read other 4 answers
RELEVANCY SCORE 35.2

Hi,
I have Lenovo Ideapad 300-15ISK type/model 80Q700DRSC.
I want to update BIOS, so I downloaded D5CN47WW. In text file it is written that this is BIOS for my computer.
Everything seems fine but when I execute BIOS exe file it says that this is BIOS for Lenovo Paris 300 notebook!
What Paris now? I tried to google but only can find Paris in France.
I am user of Lenovo notebooks for many years (from IBM ThinkPads to this days) but when txt Readme file said
this is update for your computer, it was! This is confusing for me so I cancelled update.
Can anybody explain this mistery?
Thanks in advance
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 
 

Read other answers
RELEVANCY SCORE 35.2

Ho Comprato un'IdeaPad 100: il volume di dell'altoparlante e Basso RISPETTO un calcolatore di un altro Lenovo bis del calcolatore di Altre Marche, vorrei Sapere se Qualcuno ha LO STESSO Problema. Grazie.
 
Google translated from Italian to English......
 
I Bought un'IdeaPad 100 : the volume of the speaker and Basso RESPECT one computer to another computer in a Lenovo Other brands , I would like to know if anyone has the same problem . Thank you.
 
Mod's Edit:  Since this is an English forum you may get a better response by posting in English.  Readers have a tendency to avoid posting in threads which require translation.
 
Modifica del Mod : Dal momento che questo un forum inglese si pu ottenere una migliore risposta inviando in lingua inglese . I lettori hanno la tendenza ad evitare distacco in fili che necessitano di traduzione.

Read other answers
RELEVANCY SCORE 34.4

Here is my situation,
I own a Lattitude E7450, and needed to connected two displays to it. I went ahead and bought the Dell E-Port Plus Advanced Port Replicator with USB 3.0, since it has 2 DVI ports on the back. It shows it is compatible with my laptop.
I set up my dock, connected my laptop, as well as both external monitors. Only one monitor shows a duplicated desktop. When I go into the display settings, I cannot see any existence of another external display being connected.
All of my drivers are up to date, restarted laptop many times. Pretty bummed out.
Anyone have any solution/knowledge to this?

Read other answers
RELEVANCY SCORE 34

Need some advice a quick as possible.

Windows XP Pro
ofc had a built in serial port go bad, it was hooked to a charicter generator (don't no how to spell charicter) for a tv channel.
Installed a Controller Card with two serail ports PCI Multi I/O Controller Card, it didn't show up in the device manager was having problems getting the driver to work. says to load driver first then put in the pci card. Anyway it wouldn't work. The port that was built in (that went bad was on com 1) When the new card didn't work I used a usb with a serial adaptor and it went in fine and showed up in the divice manager and it said it was working and it started out on com 3, I no each time you plug the adaptor into a different usb port it goes to a different com port. That isn't a problem cause it would stay in the same port. Anyway device manager said it was working we changed the charicter generator to com 3 but it wouldn't work. We no the cables are good. I then got a PCI Card with one serial port instead of two and installed it and it show right up in the device manager and said it was working and I for get what comport it was on but changed it to com 1. that port didn't work either. Finally brought in another windows xp computer and hooked everhthing to it and it works. The xp computer I brought in had no serial port so used the same usb to serial adaptor that we had used and it work the first time. Show up in the device manager just like on the first comp... Read more

Read other answers
RELEVANCY SCORE 34

Internet Service Personal Router Static IP MAC address of LAN Port or WAN Port

Hello friends,

I have purchased static IP from Local ISP Provider . Problem is that the tech support of local ISP provider is asking em

Which Port would you like to bind your Static IP

Also they ask me whats the MAC Address of Router
Pls see attached screenshot
As you can see Internet port - 74:44:01:94:E0:79
Whereas LAN Port has mac address - 74:44:01:94:E0:78

Which is routers mac address?

I have no idea.

I know we have two ports in router (mine is Netgear 300N Model)
1. WAN (Internet) Port
2. LAN Port
Could anyone really help in explaining me
1. Which one is routers mac address
2. Static ip should be binded to LAN or WAN Port

Pls guide Thank You

P.S. I intend to use DVR for CCTV for remote viewing later
 

A:Internet Service – Personal Router – Static IP – MAC address of LAN Port or WAN Port

I Don't know what your talking about directly but I'm willing to try. Can you explain a little better what the isp person is asking you? From the screenshot I know the bottom section is your local connection and the top part is your WAN connection. If that helps any.
 

Read other 2 answers
RELEVANCY SCORE 34

Hello! I am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.

I'm trying to forward port 88 on my Linksys WRT54G Version 6

I tried that but Boardwave audio streaming server still says it's not open!

Here are some pictures:

I'm using Windows XP Professional 32-Bit
Eset AntiVirus
and using Windows firewall
What am i doing wrong?
Thank you for your help!

Windows firewall screenie:

 

A:Solved: Port forwarding issues, Cannot forward port Please help! Linksys WRT54G

Read other 9 answers
RELEVANCY SCORE 34

I recently started using the E-Port Plus Advanced Port Replicator with my Latitude E7450, but the headphones are not working. Sound comes from the laptop itself, even when the headphones are plugged into the dock or laptop. The headphones work with other devices, and the laptop works with the headphones when it is not docked.

Read other answers
RELEVANCY SCORE 34

Has anyone had any issues with the Precision 7510 only outputting through one DisplayPort output on the E-Port Plus Advanced Port Replicator?Our organization recently started to introduce Precision 7510 units to our employees, and we're finding that they will only output to one single monitor connected via DisplayPort through the E-Port Plus Advanced Port Replicators - even though there are two monitors connected into the two DisplayPort outputs on the E-Port Plus APR. If the monitors are connected via DVI, the Precision 7510 is able to output to both of them through the E-Port Plus APR. We have tried Precision M4800, Latitude E7450, and Latitude E7470 units in these E-Port Plus APR's with two monitors connected into the two DisplayPort outputs - and they all work correctly.The Precision 7510 units have the NVIDIA Quadro M1000M video cards, and the E-Port Plus APR's are connected to either a pair of P2417 monitors or a pair of U2414 monitors.

Read other answers
RELEVANCY SCORE 34

1. I would like to change my COM 1 TO COM 3.
Can this be done in the CMOS? or is there a simplier yet effective way that it can be done?

I need your help as soon as possible.

[Edited by Jsimon on 08-16-2001 at 12:13 PM]
 

A:How Do I change Com.port 1 to Com.port 3? My modem is silent. Dual booting problem

What do you mean by changing COM1 to COM3? Do you want to move a device? Reassign IRQs? Physically pick one up off the motherboard and move it?

Your modem sound is usually configured in two places. One is in the Control Panel, and the other is in the Dial-up Networking settings. Adjust the volume there.

Are you running Windows 2000 and Windows 98 on separate paritions (drive letters)? If so, you'll need to use special software to convert the FAT32 file system to NTFS. I believe Parition Magic will allow this without data loss. However, I would never make such a large system change without first backing up data. There is always the chance that everything could get wiped out.
 

Read other 1 answers
RELEVANCY SCORE 34

hi,

Recently i've noticed that port 50 000 is blocked, and bitcomet says it is blocked from using this for listening. Port 50 000 used to be open, and i even forwarded it to my router.

Currently i have no firewalls running, not even the windows firewall. I also have no anti-virus running. I've checked the port forwarding settings on my routers admin page and they appear correct. Does anyone have any ideas how i could unblock this port? Thanks. I am running windows xp home.
 

A:can't unblock port 50000 - needed as listen port for bitcomet

You may not get a whole lot of help here. Please read the TSG rules for the reason.
 

Read other 2 answers
RELEVANCY SCORE 34

Hello guys,

I am being more concerned since few days about daily suspicious network traffic in my network about the below.

Looks like UDP port 137 from my private IP contacting destination port 137 to a public IPs (one source to many public destinations). I investigated these traffic by taking into consideration about 50 + offenses and 80% scan results on these PCs didn't find anything suspicious. Rest 30% detected some PUP programs from registry and some adwares, which I believe are not that much suspicious. (Scanned by Malwarebytes and Super anti spyware)

Below is a syslog log I am posting for your reference captured by my SIEM tool sent by Firewall.

<164>%ASA-4-106023: Deny udp src Internal:172.28.169.167/137 dst External:114.80.174.240/137 by access-group "My_CSM_FW_ACL" [0xb292c4f, 0x412e8e2f]

This traffic is happening on a daily basis, and to avoid security issues we have to unnecessarily scan those machines. But is this really a suspicious traffic ? Could someone please help me on this, please. After a brief investigation, if I find something good, I can save a lot of waste work by colleagues sitting abroad scanning the machines.
 

A:Source Port UDP 137(Private) Destination Port UDP 137 (Public). Malware ?

Read other 9 answers
RELEVANCY SCORE 34

i have a router/modem, Thomson ST536 and a router, Netgear WNR 1000. i have a static ip address already and port forward for both router with instructions from portforward.com. yet, when i check if the ports are open using simple port forwarding, only the tcp port is opened. the udp port remains closes. is there something else i must do to open the udp port?
 

A:problem with port forwarding. tcp port gets opened but udp remains closed.

bumpz
 

Read other 1 answers
RELEVANCY SCORE 34

Hey Guys,

I have been messing around with Apache from (XAMPP) on my Windows computer. I know that it is not secure, but I am just testing it for right now (for fun).

I am behind a Linksys WRT54g router. I can easily access the apache server from internally (locally), and in order for me to be able to access it externally (external IP in address bar), I have to port forward in my router.

So, I port forwarded port 80 and everything worked fine. I just had a question about this.

Since most internet (HTTP) traffic is served through 80, and I just port forwarded 80 to one computer, how do the other computers on my network still have access to the net. Don't get me wrong, it's awesome that this works, but I would just like to know how. Theoretically, wouldn't all the traffic that is coming through 80 be routed to that one computer?

Can someone explain this to me?

Also, when people use Apache to host sites, do they usually keep the apache ServerName (in httpd.conf) at localhost, or do they change it to a different IP? I would imagine they would keep it at localhost, so what would be the reason for changing that to a different IP?

Thanks!
 

A:Question about port forwarding port 80 (for apache) and a couple other questions

Anyone have any ideas? Thanks.
 

Read other 1 answers
RELEVANCY SCORE 34

As mentioned in the title I have both pieces of hardware.  I also just purchased a third Dell U2414H LCD monitor.  I am trying to connect all 3 via display port.  However it seems that all I can do is 2 monitors?  When I try to daisychain them I got 2 monitors mirroring each other and one through HDMI off the laptop.

Is this a physical limitation of the replicator?  Is there a firmware update somewhere?

A:Dell Latitude E6520 & E-Port Plus 2 - Display port issue

The E6520 comes with Intel HD Graphics 3000.  The specs for that GPU are buried in the specs for the CPU itself, but if you go to ark.intel.com and look up your CPU, then scroll down to the graphics section and verify that it shows Intel HD Graphics 3000, you'll find that that GPU only supports 2 independent displays, which is why you see mirroring.  More recent Intel GPUs do indeed support 3 displays, but no Intel GPUs to my knowledge yet support 4.
If your E6520 has the NVIDIA discrete GPU, I can't find any information on NVIDIA's site about maximum number of supported displays, but based on your experience I would assume it's 2 unless indicated otherwise.

Read other 1 answers
RELEVANCY SCORE 34

I'm doing terabytes of data transferring for months on end, and I was wondering if new hardware allows you to use multiple connections between hardware to transfer data to portable backup disks quicker.

Think Azure with a 5GB fiber line to RAID mirroring bay with only a USB3.0 and an ESATA port (dual banding) on the bay.

Read other answers
RELEVANCY SCORE 34

So I'm not exactly sure what information I need to share to resolve this issue or know how to fix it. I've been trying to open this port (7198), and no matter what I try it just won't open. I'm not exactly sure how to explain the problem, but the title pretty much says all. If there's any information I need to share please tell me.

Windows 7 Ultimate x64
ISP is CenturyLink
Screenshot by Lightshot
Screenshot by Lightshot

A:I port-forwarded, enabled DMZ, disabled firewall, and port is closed

Welcome to the forum. You covered the ip in the second shot are you using local lan or wan are you trying from outside the lan as you can connect while connected to local lan

Read other 1 answers
RELEVANCY SCORE 34

CDMA software requires a COM port to communicate with a cell phone. I'm using HW Virtual Serial Port v3.1.2 (single port, standalone install).

I have a separate modem and router. My Win8.1 PC is hardwired to the modem. Windows firewall is off. Windows Defender is off. Motorola Mobile Drivers Installation 5.9.0 is installed (directly from Moto's website for my phone although Win8 is not listed just Win7. I did not install in Win7 compatibility mode.). My Motorola Droid Razr HD is running stock 4.1.1 ROM. It is booted into BP Tools. WiFi is off. USB Debugging is on. It's connected as MTP (media device). Stay awake is on. Modem, PC, & phone have been rebooted. There are no errors in Device Manager for the Motorola USB Networking Driver.

In IP config, the IPv4 address for the Motorola USB Networking Driver is 192.168.137.1. In HW Virtual Serial Port under Settings tab, I unchecked NVT Enabled. On the Virtual Serial Port tab, I selected Port Name=COM10, IP Address=192.168.137.2, and Port=11008. When I select Create COM, COM10 is created and I can see it in Device Manager but I get a LAN status error (in HW Virtual Serial Port app). So something is not right. In Network & Sharing Center, I see it's an unidentified public network with no internet access (IPv4).

I'm at a loss on how to fix this. Anyone know what I'm missing? Thank you in advance for the help.

Read other answers
RELEVANCY SCORE 34

I have dual monitors......my primary display monitor is a Chimei CMV223D
My secondary display monitor is an Acer AL1916W.

My graphics card is an HD ATI Radeon 5800.

PROBLEM:

My primary display monitor which usually has a display resolution of 1680x1050 is currently stuck on 640x480 and in the property settings it won't let me change the resolution. The cable running from the Graphics card is an HDMI cable with a HDMI/DVI converter. I have also tried using the DVI port of the video card to the DVI port of the PC which comes up with same problem. Using a DVI/VGA converter and a VGA cable the VGA port on the monitor works fine!!! SOOOO long story short there is definitely something going on with the monitors DVI port.........

This randomly occurred overnight and is driving me insane to know what I need to fix. I have used different cables and to no such luck. My secondary monitor is just humming away just fine! But I really need my primary display.

I've uninstalled and reinstalled video drivers for the graphics card which is the Catalyst control centre suite and all monitor drivers appear to be up to date.

WHY oh why is my monitor locked at this resolution!!??? How to fix please help!!!

A:DVI port on monitor is stuck res of 640x480 VGA port works fine

Never mind!!!!

SOLVED CHECK THIS!!!!!

Force DVI/HDMI resolutions and refresh rates

Read other 1 answers
RELEVANCY SCORE 34

My laptop had headphones plugged in because I was watching a film, but while I was in another room, my laptop was knocked onto the floor (around 1.5-2 ft drop) landing on the headphones jack, the wire is fine, but the ports completely broken, I can see cracks and its loose and everything

The laptop has Realtek HD audio manager, and in my experience of this program on other desktops I've had, I was able to change what port does what.

My laptop only has a headphones port and a mic port, and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic, however in Realteks audio manager I can't find out how to do this. In pictures I've seen on the internet there is a "Device Advanced Settings" button (as seen in this picture http://www.vistax64.com/attachments...ealtek-hd-audio-driver-version-hd_manager.jpg) but my program doesn't have this.

Do I need to download a newer version of the software? or is it just not possible to change my mic port to be my headphone port? I dont mind if I have to use third party software, I just want it to tide me over till I can get it sent away.

Thanks for suggestions, greatly appretiated
 

A:Realtek HD audio manager, change a mic port to a headphones port?

I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.

Your best bet is to get the damaged port repaired.
 

Read other 13 answers
RELEVANCY SCORE 34

Hello,
I have trouble as described in the topic,
I have two most old laptop models, Dell Precision M6300 & Dell Latitude D630.
When laptops is docked to replicator potr dock stations D/APR (PR01X) or D/DOCK (PD01X) - bigger one model with DVD port,

headphone jack port not working under Windows 10 Pro x64 installed on both laptops.

On M6300 previously was installed Windows 7 Ultimate and on D630 was Windows 8.1.
On Dell  M6300 on Win 7 Ult. headphone jack port worked properly.
On Dell D630 on Win 8.1 I'm not sure due I do not used this on it (more years ago when it was on Win XP headphone jack port worked properly)
So when Ms start delivering updates do Win 10, I did it on doth laptops, everything on both models working fine, but only this headphone jack port in D/APR (PR01X) or D/DOCK (PD01X) wouldn't like to work when I'm dockind Dell M6300 (D630 I docked only
for test if on this one jack port will work or not) but not working too like on M6300.
So loks like drivers whih was made oryginally for Win Vista x64 ale which was workable for Windows 7 64b wouldn't like to work on Windows 10.
Maybe You have some tips what to do with this to press them to work?

Greets
PitPuma

Read other answers
RELEVANCY SCORE 34

hi all,i am facing issues with my keyboard as number 4 is getting typed continously and i cant stop it  (number 4 on keyboard not on numberpad). also i am unable to type upper case letters, as once i hold the shift key the cursor travers backwards and stops at the first word. plz helpi have tried below points:i have tried reinstalling windows which didnt work.there is no dust setteled on keyboard.please help.

Read other answers
RELEVANCY SCORE 33.6

Hi,

I have been using an DSL Siemens speedstream 6520 router at home. I usually carry out some R&D by placing servers behind the router. I access the services on each of the servers from the ouside using port forwarding and it has been working fine for http, ftp, RDP, any user defined ports etc but in the case of port 25 SMTP its not working at all. I have checked the port on the local lan and I am able to telnet to that server but from the outside only on this port 25 I am not able to telnet. But If i were to change the SMTP port number from 25 to any other port like 24 or 26, I am able to telnet from the outide. Is there any way i can make SMTP port 25 to work and access the same from the outside.

Regards
Rajesh
 

A:SpeedStream 6520 DSL Router - Port forwarding for port 25

Is it possible that port 25 has been blocked by your ISP? This is a pretty common thing for ISP's to do as a SPAM prevention measure.

As you can see, there are quite a few ISP's blocking port 25 on this list.
 

Read other 1 answers