Over 1 million tech questions and answers.

error code 0x8007000E?

Q: error code 0x8007000E?

The laptop is on windows 7 and it has no internet conection. I have tried a system restore but it did not help. I have tried to reset the ip address but it won't let me.
How can i fix this? Thanks

Preferred Solution: error code 0x8007000E?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: error code 0x8007000E?

Could you please write the correct error message?
First try updating your NICs drivers. Also, try to reset TCP / IP: http://support.microsoft.com/kb/299357
Another thing is to make sure that your IP adressing are right. Possible that the problem is with your ISP.

posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft Student
Partner 2010 / 2011
Microsoft Certified Professional
Microsoft Certified Systems Administrator:
Microsoft Certified Systems Engineer:
Microsoft Certified Technology Specialist:
Windows Server 2008 Active Directory, Configuration
Microsoft Certified Technology Specialist:
Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified Technology Specialist:
Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified Technology Specialist:
Windows 7, Configuring
Microsoft Certified IT Professional: Enterprise
Microsoft Certified IT Professional: Server Administrator

Read other 3 answers

COMPUTER: DELL - XPS m1530/Vista 64bit

This is how it started.

1. Download the SubInACL tool from the Microsoft Web site. To do this,

follow these steps:

a. Visit the following Microsoft Web site:



b. Click Download to download the SubInACL tool (SubInACL.exe).

c. When the download is finished, double-click the downloaded file to

install the tool.

d. The SubInACL tool is installed in the %programfiles(x86)%\Windows Resource Kits\Tools folder.

2. Use Notepad to create the Sub.bat file. To do this, follow these steps:

a. Click Start, click Run, type Notepad, and then press ENTER.

b. Copy and then paste (or type) the following text into Notepad:

subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f

subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f

subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f

subinacl /subdirectories %SystemDrive% /grant=administrators=f

subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=system=f

subinacl /subkeyreg HKEY_CURRENT_USER /grant=system=f

subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=system=f

subinacl /subdirectories %SystemDrive% /grant=system=f

c. Click File, and then click Save As.

d. Copy and paste the following path and file name into the File name box: %programfiles (x86)%\Windows Resource Kits\Tools\sub.bat

e. Click Save.

3. Run the Sub.bat tool, and then restart y... Read more

A:Windows Installer Service could not be accessed ERROR/(0x8007000E) Error

You didn't say,so I'll ask. Did you try System Restore from Safe Mode?

Read other 16 answers

I'm trying to help a friend fix up an old Celeron 450 that he just upgraded from Win98SE to WinXp Pro.

His Outlook Express 6 will not start. It gives a message saying that it "unable to open message store. Your computer may be out of memory or your hard disk is full. (0X8007000E,3)"

I close that message and another pops up saying that it "MSOE.DLL could not be initialized."

There is mem available, and the hard drive has lots of room left.

I checked the Microsoft sites for the error code. There was an article for OE 5.5 with error code (0X8007000E,783) Close enough for me so I tried the fix recommended. No luck.

Any body have an idea??

I checked the forum and someone did post a similar question but never had it resolved.


A:OE 6.0 Won't Start. Error (0X8007000E,3)

Read other 9 answers

I keep getting "An Internal error has occurred - Not enough space to complete his operation. (0x8007000E)"

A:Backup error 0x8007000E

Generaly speaking, 0x8007000E means current system failed to allocate necessary memory. You can check if your problem caused by not enough memory. To fix this problem, you can try to cleare all backups and images off backup drive, then
reboot your system and try to make backup again.

Roger Lu
TechNet Community Support

Read other 2 answers

I am using Window XP. Office 7.Outlook. Cannot not send/receive/move to folder/delete whatever is in it.I can open whatever is in Outlook but not do anything with it. This is the message I keep getting: C:\Documents and Settings\ Elizabeth\Local settings\Application Data\Microsoft\Outlook\Outlook.PST is in use and cannot be accessed.Close any application that is using this file and then try again. Also getting Error:0x8007000e. I THINK I can see what the problem is, plenty of "sent" and "deleted" still in Outlook and they are taking up space. My Outlook is full, but how do I get to delete what is not needed ?

Read other answers

I have a machine running Windows 7 Home with a C drive of ~220 gb (120 of which are used) and a D drive of ~600 gb (90 of which are used). I'm trying to backup C onto D, but I keep getting error 0x8007000e, which means there was insufficient memory.
I don't really understand that; VSSadmin doesn't show any shadows anywhere, and D should have room to spare. Could it be trying to create a shadow copy of C on itself? If so, how can I get it to use D?

Read other answers

MBSA command line / off-line scan returns "An error occurred while scanning for security updates.  (0x8007000e)". 

Scanning 32 bit Windows 7 professional, on a system w/ 4GB memory, that cannot be connected to the internet, but still required to be patch compliant.  Scanning with .cab file identifies required patches w/ no problems (no error as above). 
Patches applied, including upgrade to .NET 4.5.2 and WMF 4 (PowerShell 4), etc.  After patches applied, re-scan with the same .cab results in the error listed above.  Problem occurs on three identical systems.  Problem does not occur on other
non-identical 32 bit or other 64 bit systems.
Scanning w/ a batch job on each local system (not a network scan), w/ Windows Automatic Update Service turned on, and command line interface as follows:
c:\...\mbsacli.exe /target %COMPUTERNAME% /n SQL+IIS+Password /offline /noadd /qp /catalog ".\wsusscn2.cab" /nd /nvc
MBSA Scan version is 2.3.2211.0   wsusscn2.cab catalog synchronization date is 2015-09-07T18:39:143
Any ideas what to try?

Read other answers

Hi All,
My first forum question, ever ! So bear with me if I am a bit long-winded. Hopefully I am following "forum etiquette", if not then someone had better put me right.
In Win XP Pro, Outlook 2003 after hitting send/receive , I am getting the following error message:

Task 'enquiries.AL - Receiving' reported error (0x8007000E) : 'Out of memory or system resources. Close some windows or programs and try again.'

All other email addresses are behaving normally but this is an email address that I set up a few weeks ago and has only had about 4 emails sent to it since then. I have tried closing windows & programs as suggested but with no effect. Google comes up with a few suggestions most of which are above my head !
Has anyone experienced this problem and if so how did you fix it ?
BTW this problem is not occurring on my laptop which has identical email addresses.
I look forward to a deluge of remedies (though only one need work). Thanks, Nic.

Read other answers

I was getting an error earlier 0x01000038 and did a search and found a solution. The Windows 7 Backup started and got all the way to the end and I got the message that the last backup didn't complete successfully agin only this time I got a different error 0x007000E. Did another search and found nothing that related to Windows 7 Backup.Any suggestions or fixes?Craig

A:Windows 7 Ultimate x64 backup error 0x8007000E

It seems that I had some sort of issue with the size of memory Windows 7 Backup was seeing. I cleared all backups and images off backup drive, rebooted and it worked this time. CCASE CLOSED

Read other 2 answers

I stupidly tried to use a program I didn't know much about to help with a problematic uninstall of 'WinZip'.
After running this program I restarted my Laptop (Windows Vista SP2) only after restart all the security services had stopped, no internet & most annoyingly no audio" (I use this laptop primarily for making music).
The specific problem is when I go to 'services' and try to Start the 'Windows Audio' Service, I get this exact message:
"Windows could not start the Windows Audio service on Local Computer. Error 0x8007000e: Not enough storage space is available to complete this operation."
I tried a boot in safe mode, same issues. 
I'd recently scanned for viruses/malware, no issues.
I can't do a System Restore, when I try I get this message:
"System restore does not appear to be functioning correctly on this system"
& again I get the error messsage: Error 0x8007000e
"Not enough storage space is available to complete this operation."
I'm thinking I've wrecked my laptop for good, so any help would be very much appreciated...
Thanks in advance,

A:"The Audio Service is not running" + error msg 0x8007000e

This issue appears to be fixed thanks to the mighty 'ComboFix' thanks;)

Read other 3 answers

I was using Outlook 2003 and receiving the error message "can't open default folders"...tried all suggested fixes mentioned on this website but was unable to fix the problem. Therefore, I purchased Outlook 2007 which fixed the "can't open the default folders problem, but now outlook will not send or receive and gives me the "0x8007000E not enough memory error....Hopefully, someone knows how to repair this issue as I really don't want to purchase Outlook 2010....Stoe

Read other answers

Hello Sevenforums.com,
Only literally just registered because of this huge problem.

By the way I have an Atheros AR5007 802.11b/g Wifi card.

So my story begins...

A while back I'd get BSOD very regularly ONLY when connected & using the internet. I did some rummaging on here & found out that it was the athr.sys driver that was corrupted. So I went on the internet, found a clean copy, downloaded and swapped it out with the corrupted driver.

Everything was fine for a couple months until last week the same thing happened again. So knowing the steps I had to take I repeated what I did by finding another copy of athr.sys off of the internet. (I think it was the same site so I'm pretty sure it wasn't a tainted copy)

HOWEVER, instead of swapping the files I accidentally went to Device Manager and fully uninstalled my wifi card! Panicking I reinstalled it using what must have been my laptops pre-installed software(?) (Also I note at this point when I accidentally uninstalled my wifi card I think I saw another device from the network section of Device Manager disappear along with Atheros. Whatever that device was, if it was even there, is a mystery to me)

Since reinstalling Atheros however, even though seemingly everything looks completely how it was before, it cannot detect any networks at all.

This leads me to my next problem.

I try to diagnose the problem & Windows says that the troubleshooter cannot start because of Error code 0x8007000E!

I'v... Read more

A:Wifi not detecting networks after driver reinstall & 0x8007000E error


Read other 1 answers

I keep getting this error when I try to backup to external disk.
Also get same if I try to create a restore point for C:
Only one restore point is showing and it's 2 years old!
Those from windows update, etc have all disappeared!
I increased the disk space for system protection on both disks but to no avail.
What memory is the error meaning?
Are there any fixes?

Googled the error number and most posts concerned update or livemail problems, not backup/restore.
Two sites, Wiki-errors.com and Helpcomp.com, offer Registry fix downloads.
Anybody know if these work and are SAFE ?

A:Cannot backup or create restore point - Error 0x8007000E Out of memory

I would try running a sfc/scannow first actually. Have you ran your Anti-Virus and Malware programs? I'd do THAT first actually. If you haven't ran a sfc/scannow before, here's a link to a tutorial on how to do that :SFC /SCANNOW Command - System File Checker

Here's how to run the memory diagnostic : Memory Diagnostics Tool

Read other 2 answers

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!

Read other answers

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers

Today, I installed a program called "Komado" (Komado), which was supposed to be a program used in combination with an iOS app to act as a secondary monitor. After installing I noticed there were over 100 instances of Java and CMD running in the background. So, to save time, i just restarted the computer to close them all. After restarting, an error window saying "Microsoft Visual C++ Runtime Library" in the title and something along the lines of "NVVSVC.exe has been terminated" (this is an executable for my NVIDIA video card, I understand that) at the log in screen of Vista. I shrugged it off as a normal error I've run into that fixes itself and proceeded to log in. After logging in, I noticed my audio was muted and I could not unmute it or even open the volume mixer, and also my network icon showed up as "Undefined. Not enough storage is available to complete this operation." I found this strange, because I have over 100 Gb left on my main drive and about 600 Gb on my second drive, and I have the maximum amount of RAM possible for a 32-bit Vista install (3.325 Gb it says). So, taking the easy way out, I opened system restore to revert back to an earlier time. When I opened system restore It said in the window "System Restore does not appear to be functioning correctly on this system. Not enough storage is available for this operation (0x8007000E)." As if that is not frustrating enough, every time I try to uninstall a program,... Read more

A:0x8007000E On Everything (even CMD)

Hi Spice, two sugestions, google error,(0x8007000E) and read some of the suggestions, I googled it and it points to a microsoft office, or outlook problem, or present the same question in vista forums-but in microsoft office forum, good luck, Patch41.

Read other 1 answers

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

and sfc /scannow

copy/paste the results please.


Read other 1 answers


I've Windows 7 Ultimate 32 bits.
When I install the first SP, at the end of the install it said the out of memory error: 0x8007000e.
I've a HDD of 450 GB.
At the moment over the 160 GB free HDD, it can't be the problem.

What things I've done:
- Download SP1 from Windows Update & downloadbase Microsoft.
- Reset the Windows Update Components. Refer to: http://support.microsoft.com/kb/971058
- Windows Update Readiness Tool

If you'll answer, please answer in simple English, or if you can in Dutch.
Maybe the problem is that I haven't SP1 on my pc, so I can't play GTA IV.
So I hope you guys can help me.

A:W7SP1 0x8007000e

Please fill in detailed system specs. It's kinda difficult to help you if we don't know anything about your computer - for example how much RAM it has.

Read other 2 answers

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

A:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

Read other 1 answers

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.

Go to Solution.

A:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

Read other 3 answers

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

Read other 2 answers

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

Read other answers

Hello. I have 5 computers in the house, all running Windows 7 Ultimate (All Legal). I have successfully installed Windows 7 SP1 on 4 of them, but this PC, the main one, fails with the following message:


This computer is a Q6600 Quad core with 4GB RAM, and two 1 Terabyte drives. I have run Memtest x86 and both 2gb modules pass. From what I can tell there are no issues with my RAM or drives.

I have done a chkdsk /r /v on both drives, no issues found.
I have defragged and cleaned both drives.
Drive C: 89% free
Drive D: 65% free
Ram was 46% used during the install.
Install lasts about 1 hour and 20 minutes and then fails with the above code.

I made sure to disable all startup programs, antivirus, Spybot Search & Destroy. Only 57 running processes at install time.

About 2 weeks ago, I replaced two 500gb drives with these two 1tb drives. I used EASEUS drive copy to clone the drives, then EASEUS Partition Master Free to extend the partition into the unused space after. I needed to use the Windows 7 DVD to boot and it performed a repair. I was able to boot after that.

The system boots and runs really well, and I have had no issues. System Restore creates a restore point every time I try to install.

When I go to Advanced System Properties, Advanced Tab, Startup and Recovery, under System Startup at the top it says "Windows 7 Ultimate (recovered)"

I have no idea what is going on here. I usually troubleshoot myself, and ver... Read more

A:Windows 7 SP1 Install Fail 0x8007000e

Quote: Originally Posted by y0himba

Hello. I have 5 computers in the house, all running Windows 7 Ultimate (All Legal). I have successfully installed Windows 7 SP1 on 4 of them, but this PC, the main one, fails with the following message:


This computer is a Q6600 Quad core with 4GB RAM, and two 1 Terabyte drives. I have run Memtest x86 and both 2gb modules pass. From what I can tell there are no issues with my RAM or drives.

I have done a chkdsk /r /v on both drives, no issues found.
I have defragged and cleaned both drives.
Drive C: 89% free
Drive D: 65% free
Ram was 46% used during the install.
Install lasts about 1 hour and 20 minutes and then fails with the above code.

I made sure to disable all startup programs, antivirus, Spybot Search & Destroy. Only 57 running processes at install time.

About 2 weeks ago, I replaced two 500gb drives with these two 1tb drives. I used EASEUS drive copy to clone the drives, then EASEUS Partition Master Free to extend the partition into the unused space after. I needed to use the Windows 7 DVD to boot and it performed a repair. I was able to boot after that.

The system boots and runs really well, and I have had no issues. System Restore creates a restore point every time I try to install.

When I go to Advanced System Properties, Advanced Tab, Startup and Recovery, under System Startup at the top it says "Windows 7 Ultimate (recovered)"

I ha... Read more

Read other 9 answers

I have a PC that's joined to the domain, and was originally configured to get from WSUS. Things have changed; however, it's still required to be tied to the domain (although it's not benefiting at all and not using anything from the domain). I cannot search
online for updates. It's a Windows 7 SP1 x86.
I followed https://support.microsoft.com/en-us/kb/971058 and https://support.microsoft.com/en-us/kb/949104

2016-06-23    11:48:53:362    1204    750    AU    Triggering AU detection through DetectNow API
2016-06-23    11:48:53:362    1204    750    AU    Triggering Online detection (interactive) non-default
2016-06-23    11:48:53:362    1204    196c    AU    #############
2016-06-23    11:48:53:362    1204    196c    AU    ## START ##  AU: Search for updates
2016-06-23    11:48:53:362    1204    196c    AU    #########
2016-06-23    11:48:53:367    1204    196c    AU    <<## SUBMITTED ## AU: Search for updates [CallId = {AFB310B3-F72E-4594-9D0C-E1CAE06DA005}]
2016-06-23    11:48:53:367 ... Read more

Read other answers

I aldready posted this elsewhere on the forums, but then noticed that topic was located it was in the Tutorials section. Since it's pretty urgent to me I also created this topic.

Recently I upgraded from Win7 x86 to x64 (professional), but I can't get Windows Mail to work. I got a copy of a working 64bit version (from another computer) of Windows Mail but it won't work on my system, giving this error: 0x8007000E. I Googled it dozens of times but can't get to a solution, most of the results are related to Vista, 32bit and/or other software applications.

My housemate also has a Win7 64bit system, so I already tried copying my Windows Mail to his computer to see if it's corrupt or something alike, but it's not. It totally works on his computer.

Somewhere I found the solution of locating another MSOERES.dll elsewhere on the computer (C:\Windows\winsxs\x86_microsoft-windows-m..-core-dll.resources_31bf3856ad364e35_6.1.7600.16385_en-us_2cea88b0c19dd22e) and placing it in the Windows Mail folder. I was very happy to see it actually launched the application, BUT.. There are no icons whatsoever and some text styling isn't correct:

I copied the whole Windows Mail folder again, placed it on my mate's computer, but with the same result. So this is probably due to MSOERES.dll. But with using the one that SHOULD work, I get the 0x8007000E error.

Does anyone have an idea about how to solve this? I really want it to work the way it should 'cause I know it's possible, as... Read more

A:Windows Mail 64bit not working (0x8007000E or no icons)

Can you tell us how you got Windows Mial on Windows 7? According to this Windows Mail isn't included with Windows 7 - Looking for Windows Mail? You'll have to use Windows Live Mail.

I know I don't have Windows Mail on my system, I do however have Live Mail, though I don't use it.

Am I missing something?

Actaully why can't you just use Live Mail? Doing the hack and crack thing with Windows Mail isn't going to work too well as you've seen.

Read other 9 answers

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

Read other answers

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

A:BSOD PLaying League of Legends error code 0x0000001e a common code


Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


* *
* Bugcheck Analysis *
* *
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
2: kd> !analyze -v
* *
* Bugcheck Analysis *
* *
Driver Issues:


Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version

C... Read more

Read other 9 answers

After poking around on other threads, there's a chance this is related to the hardware drivers. However, I wasn't able to find a thread with this exact error code, so any help on what this means and how to correct it would be appreciated thanks! This is generating on a LENOVO ideapad Y700 series laptop (15 inch).


Go to Solution.


Update your Intel Video driver and the false error from LSC should disappear.WVC007002-UM7YSIw=windowsvc=video cardtest 007result code 002um7ysi is a hash code of the serial number of your machine and useless info<unless you chose to send feeback info to Lenovo

Read other 1 answers

Greetings, I need help solving the error codes below. Thank you

Product: Windows Defender -- Error 1923. Service 'Windows Defender' (WinDefend) could not be installed. Verify that you have sufficient privileges to install system services.

Product: Microsoft Office Enterprise 2007 - Update 'Security Update for Microsoft Office Word 2007 (KB2251419)' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\user\LOCALS~1\Temp\MSIfb8e4.LOG.

I hope I have provide useful information to get your help.


A:Error code 1923 and Error code 1603

hi, got a questions for ya. have you uninstalled any virus protection software lately? the reason i ask it might of left remnants behind if you did not use the removal tool.

Read other 1 answers

Hi guys, first time posting so apologies in advance if I do something illegal. As far as I can gather, I should be posting in the right forum. I've been having system stability problems for the last week or so. I think it might be because of a mass driver update across my system since nothing else seems to be the cause.

Basically, I updated some drivers bout a week ago and now the PC either hangs or auto-restart when I'm playing games. At first I thought it might be due to OC instability, so I reset my bios to default settings. Didn't quite work out completely as the system still exhibits the "sudden death" during gaming.

Have tried the steps in the sticky above on refreshing the page file. defragging etc. Problem still hasn't gone away. All rams have cleared 7 cycles of memtest at 2.65 volts and 2.6 volts without problems, though everything has been reset to stock already.

My system specs are as follows :
AMD 64X2 4200+
MSI K8N Neo 4 Platinum
2 x 512mb Kingston CH5 PC3200 DDR
2 x 512mb Mushkin Black Line BH5 DDR
Inno 6600GT 128mb
Creative Audugy ZS Platinum
BenQ 1640
Gigabyte CD-RW
Hitachi/IBM 80GB SATA II
Western Digital 240GB SATA HD
Verudium Vortex 430W

Am fairly sure its not a power issue and the core temp never exceeds 49 degrees even at full load. Its about 44/45 idle. Am guessing it might be the soundcard though... Anyone able to help?

Would be most grateful for any assistance and thanks in advance.
... Read more

A:system error code Error code 100000d1

Looks like NV4mini.sys is the Nvidia faulting driver... Your Inno 6800GT drivers are at fault

Read other 4 answers

I have a HP 522c AMD Athlon 2000+, running windows xp. There is an integrated video card that went bad. So in installed an AGP video card it is a 3D Prophet 4000XT 32 MB. Now that the card is installed when I have it activated there is a code 12 on one of the pci to pci bridges so that my network card in the other pci slots will not work. I have tried the network card on other computers and it works fine, i have also tried the video card and it works fine. I also tried other items in the pci slots while the agp card is in(modem, sound card) and i still recieve the same error. The card works when a pci bridge is enabled but only with the VGAsave driver and with very low quality. When i check the device manager while both pci to pci bridges are enabled, when i can only run the VGAsave driver, it says the there is a conflict under the I/O range with the VGAsave and an Pci to Pci bridge. Any windows updates just delets the pci to pci bridge listed in the device manager. And i have tried all the drivers i could from AMD, HP, Hercules. Any help would be welcomed on how to fix this.

A:Code 12 in xp on a Pci to Pci bridge, Recieve a code 12 error with video card

your hp box is not only engineered by hp (who tend to focus on low assembly costs) but is an oem build, thus severely limiting your options. a suggested next step would be to attempt to poke around in the bios setup utility and/or to try out a wider variety of cards/slot configurations. good luck.

Read other 9 answers

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

A:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

Read other 2 answers

I am completely stumped by this problem. I will do my best to explain it and see what you fine folks can do.

I had an older bluetooth dongle, off-brand model, 2010-2011 year, that I installed on my new desktop computer. It worked, but sound quality on my Sony Dr-BT101 headset wasn't great. It worked well with my bluetooth-enabled phones and tablets, so I suspected the dongle. I bought a CSR8510 dongle, which came with a CSR Cambridge Radio Harmony software stack. I installed the software, and turned on the headset, paired it, but no sound came out of the headset. I went to Sound, saw no entries. Went to device managers and saw the parts in yellow. I tried to update the driver but all I got was Code 18 error and this weird message in the picture. I clicked on properties and saw this message.

The drivers for this device are not installed. (Code 28)

There is no driver selected for the device information set or element.

I am stumped. I've tried uninstalling, re-installing, installing other Bluetooth drivers, waving a magic wand, none of it has worked. I'm thinking it's a problem with the Registry, but I am not sure how to proceed.

Any ideas?

A:Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

Give this a try. It's free.
You do need to resolve those Other devices category issues.

Read other 1 answers

I am having the typical black screen. I just want to see if anyone has a resolution to the problem before I have to spend money for a new one. I checked everywhere before I posted for help.

Thanks in advanced. Joe D.

Read other answers

Windows updates are not getting installed in one of  the Windows 7 Enterprise Edtion 32 bit machine. Downloaded updates and tried to install also did not install. I have followed few methods and it did not help. please help to solve the issue. 
Uploaded the Windows Update log in the 

Method 1
Executed the below command as administrator 
net stop wuauserv
ren SoftwareDistribution  SoftwareDistribution.oldd
net start wuauserv
Wuauclt.exe /scannow
wuauclt.exe /resetauthorization
wuauclt.exe /updatenow
net start wuauserv
Method 2
Executed the below command as administrator 
sc config winmgmt start= disabled
net stop winmgmt /y
cd %windir%\system32\wbem
ren Repository Repository.old
sc config winmgmt start= auto
net start winmgmt

Regards, Boopathi

Read other answers

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

Read other 6 answers

Just got this result. What does this mean??Thanks!

Read other answers

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7

Read other answers

Error Code C00D1199 (aka: code 80040265) is an error message that can be displayed in several different ways and can be worded different as well, but it all refers to this error message originally posted as message 80040265.

There were a few posts on here about them, but many of the threads seemed to be closed. I just noticed that I have gone through all of the motions and really tried, but no pickle here....well, there might be a pickle, but it is the kind of pickle you get stuck in and is not cool whatsoever.

Here is what I have done:

1. Made sure that the format was supported with windows media player. It was, as it is an .avi, so no problems there.

Here are the types that are compatible:
.au and .snd
.aif, .aifc, and .aiff
.mp3 and .m3u
.mpeg, .mpg, .m1v, .mp2, .mpa, .mpe, .mp2v, and .mpv2
.mid, .midi, and .rmi
.avi and .wav
.asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx
2. I made sure that other .avi's I have in my collection were working properly with the WMP (Windows Media Player). They were, just not the ones I was trying to fix, of course..

3. I made a sandwich and drank some Yoohoo.

4. Installed a sturdy set of codecs with DivX to ensure that that was not it. I know I had to do it before, but I recently cleaned and started my PC from scratch again, so the previous codecs were not there.

5.Made sure all of my audio devices and drivers were updated and installed properly-for the most part-which I ... Read more

A:Error Code C00D1199 (aka: code 80040265)

Welcome Miss Haley, have you read through some of the suggestions here? They seem to have some detailed info on the error code C00D1199 (aka: code 80040265)

I use the free "Jet Player" and love it - whether it's movies or music - there's not much it won't play or burn, (runs circles around WMP)
Hope this helps

Read other 1 answers

Admin password or power on password1st is how do I disable it all together?2nd thing I need system disable code # 54575104

A:System disable code error code

@Shuwat66? Please enter            41453120 Regards.

Read other 2 answers

The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:

Read other answers

my dell inspiron 1520 start give problems. after PSA diagnostic i have got error code 0146. message: error code 2000-0146. unit 1:dst log error. what does it means? what do i need to do next? many thanks

A:error code 0146, message error code 2000-0146

Had this same problem on Inspiron 1545.  Just wanted add what I did that seems to have solved the problem, I'll let u know if it stops working again.  Will be posting this elsewhere as well.
Got started on this link: 
I booted off the dell OS disk by pressing f12 at startup and selecting CD-rom/DVD. 
After files load, Click repair OS instead of Install. 
Click Command Prompt.  Type C:\   Hit Enter
Type in chkdsk     Hit Enter
After chkdsk runs, If you have the same problem I did, it will say unable to repair in read-only mode.
on C:\, Type chkdsk/r
It will prompt you that all handles will be invalid, type y and press enter.
chkdsk fixed my problem, Reboot by typing exit and press enter.  
Start Windows Normally.
Hope this helps, def post again if it happens again.

Read other 16 answers

IN my Dell Inspiron 1520 , whenever I start my laptop I get the message "Internal hard disk drive not found.To resolve this issue, try to reseat the drive.No bootable devices -- strike F1 to retry boot, F2 to set up utility.Press F5 to run on board diagnostics."
 I ran onbiard diagnostics which showed following:error code = 0141msg error code = error code 2000- 0141msg : no drive detectedI also opened the Hard Drive by removing hard drive screws to reseat the drive and put it back again as it was there intially.But when i started my Dell Inspiron 1520 , I get the same message -- "Internal Hard Disk Drive Not Found TO Resolve This Issue, Try TO Reseat The Drive" came.Please help me in this.


Hi, the errorcode speaks for itself, the system can't find the hard drive, i suggest you try plugging it into an desktop system as salve to try and save data, but if it is not found there either you will have to buy a new hard drive/get one on the warranty.

Read other 25 answers

i need help fixing these 2 error codes 28 and 80070103

Read other answers

d version of windows 10"?
socan u please help me....
My code is:
package First;

import org.openqa.selenium.WebDriver;
import org.openqa.selenium.edge.EdgeDriver;
import org.openqa.selenium.edge.EdgeOptions;

public class Demo {

// TODO Auto-generated method stub
public static void main(String[] args) throws InterruptedException {
// TODO Auto-generated method stub
System.setProperty("webdriver.edge.driver", "C:\\Users\\Ganesh\\Downloads\\MicrosoftWebDriver.exe");
        WebDriver driver = new EdgeDriver();
        driver.manage ().window().maximize();



Read other answers