Over 1 million tech questions and answers.

Touch screen not detected as a touch device.

Q: Touch screen not detected as a touch device.

I have a kiosk on which I've just installed 8.1 pro. It has an oem touch screen manufactured by General touch (p/n st6001u). I've installed the driver and it seems to work but Windows still says "no pen or touch available". My customers using the
kiosk will need to type on screen in addition to just clicking. Is there any way to for the OS into touch mode? I believe under 7 there was an option in Windows features but I can't seem to find anything on 8. Google has been no help.
Any ideas?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Touch screen not detected as a touch device.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 90

My Ideapad S415 touch screen has suddenly stopped working.  I've had a tech connect to my PC and try a BIOS reload of default settings, plus unistalling all "HID" devices in Device Manager with no resolution.  I've also tried a system restore with no luck. The system properties does see the touch capability. Suggestions? Thanks.










Solved!
Go to Solution.

A:Ideapad S415 Touch - touch screen stopped working

hi Hersh,
 
Welcome to Lenovo Community Forums!
 
First do a Power Drain 
     (If the battery is removable)
            Remove AC and Battery and hold the power button down for 15 sec.
               Turn the computer back on and see if the Touch capability is now detected under System Properties,
                  If not
         I suggest you contact Lenovo Technical Team about the Issue as this may be a device detection issue.
       Lenovo Technical Team
 
Regards
Solid Cruver



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 90

My laptop automatically updated in Sept./Oct. It took about an hour and had multiple restarts, so I am assuming it was a Windows 10 update. I am not 100% sure though. Afterwards, the touch screen doesn't work. My laptop automatically updated in Sept./Oct. It took about an hour and had multiple restarts, so I am assuming it was a Windows 10 update. I am not 100% sure though. Afterwards, the touch screen doesn't work. I can tap the screen and it will select stuff but I cannot scroll or anything else. Anyone able to help with this? It is drving me bonkers.

Read other answers
RELEVANCY SCORE 90

My Lenovo U410 Touch recently got damaged - the hinge broke causing the touch screen to **bleep**.I was told that a repair was not feasible as none of the repair shops near me were able to source the parts needed.I therefore bought a new laptop. However, there is a lot of data on the old laptop that I want to access, including sorting out the licensing of MS Office (by uninstalling from the old one).I cannot do anything about it as the old machine is completely unusable as due to the touch screen being cracked, it seems to think it is constantly being touched in multiple places on the screen. This means that I cannot access the laptop to copy the data or uninstall Office. Anyone know any way around this that doesn't involve taking it to a repair shop to "recover" my data. Cheers

Read other answers
RELEVANCY SCORE 88.8

Hello everyone, my touch screen on my lenovo ideapad z400 touch is not working anymore.  The only weird thing I remember is some ghost touchpoint on my screen. I've been looking for the answer to this issue, but it seems that Lenovo does not address this problem.  If someone has found the solution to this problem and wants to share it with me, I will be forever grateful.  

A:IdeaPad z400 Touch - Touch screen not working

I facing the same situation right now. any solution please. left side of monitor is being "touched"?

Read other 1 answers
RELEVANCY SCORE 88.8

Hello, My Thinkpad Yoga is connected to a large display through ThenkPad docking station.  Its lid is closed.   During my work, from time to time I see random touch clicks on my screen, and random opening of menus.  It is clear that the touch screen is active although the lid is closed.  When I open the lid, and still connected just to the 2nd display (large screen) display the phenomena stops.  Worth noting is that although only the 2nd display shows an image, the laptop touch screen is still sensetive to touch.  This is I guess why the random touches show up on the screen -- it feels the keyboard not fingers. I expect the touch screen to be disabled while the lid is closed or when projecting only to the 2nd screen.  The solution of opening the lid while connected to the docking station is not acceptable.  Lenovo's local support suggestion to disable touch for the Yoga is also not acceptable -- people purchase Yoga to get Touch.   A solution please! Yaron

A:Yoga touch screen generates random touch while lid...

I am experiencing the very same thing.A driver/BIOS update would be very much appreciated, dear Lenovo.

Read other 9 answers
RELEVANCY SCORE 88.8

Hello,I am desperate for help. My laptop will turn on. And I can type in my password. But then when the computer loads it takes a very long time and when it gets to the desktop the keyboard, the mouse, the touchpad, and the touch screen won't work. I can see everything on my desktop. But I cannot open anything or do anything at all. How can I fix this?Thank you!!!

Read other answers
RELEVANCY SCORE 88.8

I bought new, but somehow do not want to workVideo is compared, apparently just enough to buy a new cable https://www.youtube.com/watch?v=cj5L-1l4qzI&feature=youtu.beI bought it herehttp://www.ebay.com/itm/Lenovo-Ideapad-S210-New-11-6-LED-LCD-laptop-screen-with-touch-glass-/1912932...
 
This is a new LCD
This is a broken LCD
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

A:Lenovo S210 Touch broken LCD and Touch screen

Hi Magnutus, welcome to the forums.
 
Please check if you Lenovo S210 is on warranty under with this tool.
After that you can open a ticket with Lenovo for the screen to be fixed, if it is not under warranty it will have a cost.
 
If you are the guys that like to fix it yourself (and it is not under warranty) I can recommend you to check the support site for your model, read the Hardware Maintenance Manual (on the documents area) and check how the machine is organized on the inside. On the parts lookup page you can find the parts number so you can find a replacements for the component that is giving you issues.
 
I hope this links helps you.
Regards
 
 
 
 

Read other 1 answers
RELEVANCY SCORE 88.8

The touchscreen stopped working suddenly on my Envy TouchSmart Sleekbook 4-1115dx. At first i though it was like a normal failure and that will get fixed by turning the pc off or restarting so I did not pay attention to it until now that I had restart my pc multiple times. Currently running win10. I started to believe it was because of an update a few days ago since it was when the problem started but all drivers and everything is up to date. I have checked for the HID-compliant Touch Screen driver and had to  show hidden divices in order to find it. I cannot enable it and when i check in the properties the following message displays: "Currently, this hardware device is not connected to the computer. (Code 45)To fix this problem, reconnect this hardware device to the computer." I have no idea on how to connect or how it got disconnected. I come from a similar thread but did not solve my problem. I have been researching this for hours and have not found and answer. Help please! 

Read other answers
RELEVANCY SCORE 88.8

hello,iam facing a severe problem  regarding th touch on HP envy notebook 13 .touch bubbles are being appeared without any touches made manually,i have facing this problem since a month.hope u guys help me out to solve this problem.

Read other answers
RELEVANCY SCORE 88.8

I want to buy this mouse to better work with my laptop.
Can somebody give me some feedback on how this glas pane works instead of a scrollwheel? Handling, etc.

A:Logitech Touch Mouse 400 for a Laptop with no touch screen

Sorry I can't answer your question, but this post piqued my interest. I use the Logitech 620 touch mouse on a Windows 7 box at work. I find a little touchy and has to tweaked. But I haven't tried the 620 on Windows 8. Because I'm always looking for the perfect mouse, I think I might just pick up the 400 tonight and let you know.

Read other 1 answers
RELEVANCY SCORE 88.8

Not only are "pen and touch" no longer in my control panel, HID-compliant touch screen is not in my device manager.  Needless to say, my touch screen is non-responsive.
I have a Compaq Elite 8300.
I had problems before but everything was working 24 hours ago and I didn't make any changes since then. 

Read other answers
RELEVANCY SCORE 88.8

The laptop has vertical lines of dead pixels running across the screen and I want to get the LCD replaced. Now the non touch screen model of this laptop has a Full HD variant (1920x1080) as opposed to the standard 1366x768 WXGA HD display while the touch models only come with the WXGA HD LCDs. Can I replace the LCD of my touch screen model with the FHD one? I have been able to detach the digitiser from the LCD itself and have the hinges and screws so I would assume it would be a simple case of changing one LCD with the other. The replacement touch screen models all come with the digitizer and hinges attached which is not something I require so it would be easier (and cheaper!) if I only got the LCD replaced. Lastly, if this is possible, do I need to purchase any additional cables? If so, which one?Thanks in advance.

A:Replacing Dell 15R 5537 Touch screen LCD with FHD non touch LCD

You're going to need at least the FHD wiring harness:
www.parts-people.com/index.php
the screen
www.parts-people.com/index.php
and the bezel
www.ebay.com/.../302211389965
You may or may not be able to re-use the back cover/hinge assembly - usually these are different between non-touch and touch versions.

Read other 1 answers
RELEVANCY SCORE 88.8

Hey everybody, I just received my P40 last week as a replacement for another Lenovo device. So far, everything seems to work fine with one exception: When I turn the screen over to the "tablet position", the touch screen and the touch pen show erroneous behaviour.a) As soon as I make the first input with the touch pen, I cannot make any further input with my finger, so the touch input is simply turned off. The Windows setting to ignore touch input when the stylus is used is not active.b) When I try to tap buttons at certain areas of the screen, especially at the upper edge, the cursor of the stylus starts jumping around and shows up at the lower edge of the screen. That means that when I for example tap on the "X" symbol in the upper right corner to close a window, I actually click on some of the symbols in the system tray in the lower right corner. This problem stops occuring as soon as the angle between the two case parts (screen and keyboard) reaches/exceeds approx. 40. It does not matter if Windows is in "Tablet" or "Desktop" Mode. I already tried to manually install another Wacom driver mentioned at https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Wacom-Tablet-Service-for-ISD-Driver-Win... and https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P40-Yoga-issues/td-p/3293985. I had no luck trying driver versions 7.3.3.12, 7.3.4.8 and 7.3.4.13. I would really appreciate your help since this issue makes working in the tablet position... Read more

Read other answers
RELEVANCY SCORE 88

Hello,Touch screen on my new E220T Monitor  is not working .  It does not show in Device Manager when connected with usb cable .  Looks  like internal usb hub of the monitor is working becouse  it shows in device manager , but touch screen is dead.Aby suggestions?  Thank you 

Read other answers
RELEVANCY SCORE 87.2

hello i want from you to help me i bought laptop lenovo g50-80 touch from amazon it was working good until something happened then the monitor touch screen didnt work at the first it was working very good but now it doesnt want to work i searched for solution but i didnt find anything also the numbers on the right side of the keyboard doesnt work either even if i activate the num lock button  plz answer me and thank you

Read other answers
RELEVANCY SCORE 87.2

window 8.1 check pc info Pen and touch : No pen or touch input is available for this display No pen and touch in control panel I'm ready install drivers completed  how do I?

A:My desktop B50-30 Multi touch touch screen not wo...

Hi keerati,
 
Welcome to Lenovo Community Forums!
 
Check the Touch funtionality in OKR environment.
    Turn off the computer and Turn it back on and right away start tapping F2.
    Select Recovery. Once in the Recovery screen Test the touchscreen by touching any of the option if it will respond.

If the touchscreen works in OKR Environment, I suggest you perform a One key recovery (expect dataloss).
 
If the touchscreen still did not work in OKR Environment, I suggest you call Lenovo Technical Team for assistance.
 
Regards
Solid Cruver
 



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 4 answers
RELEVANCY SCORE 87.2

Hi, I've recently formatted my Laptop HP Envy m7-n101dx (touch) and installed Win7  Ultimate (64 bit).  I have downloaded all drivers available on HP website and installed on my laptop.  There is only one unknown device left (acpi\msft010), and I'm unable to to find the correct driver.  My problem is I'm unable to use the touch screen of the laptop, I've googling and found that is there must be a problem with with the Human Interface Device, but when I've checked the Device Manager no Human Interface Device is on the list.  Please could anyone help me out.  Thanks in advance

A:Touch Screen of HP Envy m7-n101dx (touch)

Hello @JeffJadoo, Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your issues, with help from the community! I understand that you are having an issue with the Touch Screen, and wanted to assist you! Did the notebook originally ship with Windows 10?  How did you go about formatting the notebook, and installing Windows 7?  You may be able to use the Recovery Manager to restore the drivers, however, based on how you installed Windows, the Recovery Partition may already be removed.  You can also try reviewing the following document, to see if the information helps: HP Notebook PCs - Touch Screen Issues (Windows 8) Please post back with the results.  It is possible that the Touch Screen may not be supported for Windows 7 on that particular notebook. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!

Read other 2 answers
RELEVANCY SCORE 87.2

Hi, Just a quick question, we have one hp touch laptop model # 13-a200nx Pavilion series, and it touch has broken. I wanted to know can we replace its touch with non touch screen ? is there any availability?  Thanks

Read other answers
RELEVANCY SCORE 87.2

The touch-screen monitors are probably more expensive than your regular LCD Monitor...

A:Will anyone buy a touch-screen monitor just to use the touch feature?

http://www.newegg.com/Product/Product.aspx...N82E16824205010Just a little more expensive. I think I would get one?

Read other 11 answers
RELEVANCY SCORE 87.2

Hi everyone,  I am currently using a Lenovo T450s with the default screen option when checking out. I would like to upgrade to a touch screen. I would like to ask if:- the upgrade from non-touch to touch screen is possible?-where could I buy the touch screen for the laptop? would this one work? https://www.amazon.com/Lenovo-T450S-Touch-Screen-04X5911/dp/B01H0NKM5W/ref=sr_1_5?ie=UTF8&qid=147986... - where could i the basic guide to do it by myself? The most important question that I think is the first one: whether it is possible to upgrade from a non-touch to touch screen on T450s. I look forward to hearing all the suggestions.Thank you.

Read other answers
RELEVANCY SCORE 87.2

My client told me this was a touch screen, so that is what I ordered.  HP 749970-001 touch screen display assembly.It is installed, but not recognized.  In order to use it as a touch screen, would I have to replace the motherboard too?Is there a driver available?  The display works, it is just not working as a touch screen.




Sparky

Read other answers
RELEVANCY SCORE 87.2

Touch screen on our HP Pavilion 23ST Touch All in One PC P2N42AVstopped working after about 6 months. I reimaged and restored it back to original system. To make sure nothing waschanged by any updates that may have been done.I cannot see any options in device manager for the touch screen.Everything else is working just fine but no touch screen functionality. doing F2 and trying component test. Touch screen isn't there.It is like it disappeared.   This id used in a business and it was working 18:00and the next morning nothing.

Read other answers
RELEVANCY SCORE 87.2

I'm on the Driver Download page for the S400 Touch, but I have no idea which driver is for my touch screen.  There are display drivers and mouse/touchpad drivers, but neither of them say anything (at least I don't see it) about the HID touch screen.  Running Windows 7 64bit.  Any ideas?

A:S400 Touch - Driver for Touch Screen

Hi DJwhiteSquall,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are looking for the display drivers for your Lenovo S400 touch laptop.
 
As per the specification of this laptop  has AMD Radeon 7450M Graphics card, however please share the serial number of the laptop through private message as this help us to assist you in better way.
 
Click here to send the private message.   
    
Hope this helps. Do post back if issue persists!
 
Best regards,       
                                     
Ashwin.S




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 86.8

I have a hp pavilion touchsmart 15-n029so. Unfortunately my touch screen is defect, so 5-6 points on the screen is constant active. Until recently I managed to disable the driver for only the touch driver (not the screen) through device manager, but then a lately update for windows 10 activated the driver again. So now the 5-6 points is constant active, and I cannot login because the screen will not focus on the login field.  This means I cannot login to windows 10. I have also tried to start safe mode (turning off computer repeatly, so it starts up in safe mode), but here the touch screen driver is also active.  How can I disable the touch screen driver without login into windows 10?  

Read other answers
RELEVANCY SCORE 86.8

Can we replace the capacitive touch controller or is it fixed?

A:Can one capacitive touch screen be replaced by a resistive touch screen?

Can you please provide more details?
What device do you mean?

Read other 2 answers
RELEVANCY SCORE 84.8

Hello,

I am new to Windows 8 and have recently purchased an Asus N550JK. The touch screen worked for the first day and then stopped. After that, I even reset the laptop to original out of box condition and it didn't work.

A few days later, after trying everything I could find, it actually worked for another day, but just 1 day. It has again stopped working and the touch keyboard isn't starting with Windows any longer, and I can't find any clues of touch in the device manager.

In system, it says "no pen or touch input is available for this display."

After searching and reading this board, I can't find anything more to try. I'm stuck and need some help.

By the way, I spoke with Asus and they offered no troubleshooting but immediately said I'd have to RMA this new laptop to the tune of anywhere between $130-$300. That's messed up and not going to happen

The laptop:
Asus N550JKWindows 8.1i7 quad coreNvidia GTX 850M8gb ram

Read other answers
RELEVANCY SCORE 84.8

I have a Flex 3 1120 that had a catastrophic HD failure.  I upgraded to a 500 GB SSD but chose not to clone the old drive. Instead I opted for fresh install of Windows 10 Home from USB.  I installed as many drivers as needed (copied from the Lenovo partition).  The computer is running fine except there is no HID-compliant touch screen device in Device Manager any  Therefore, the touch screen no longer works. I'm out of warranty and cannot find an appropriate driver to enable this much needed feature again.  Any suggestions are greatly appreciated.  Thanks! 

Read other answers
RELEVANCY SCORE 84.8

Since the latest windows 10 update, my touch screen has been disabled. I've scoured the forums and tried things listed here for similar devices, with no success. The closest I've gotten is locating my HID-compliant touch screen driver (HIDDEN) and attempting to update it (fail) and uninstall it (no effect). The only USB devices I've used on this machine are thumb drives and cell phones for charging. I am at a loss as far as how to reenable the touch screen. Any help would be great. Thanks.

Read other answers
RELEVANCY SCORE 84.8

I have a leveno ideacentre and the screen is busted so it thinks it is getting random inputs all over all the time. I use an alternate monitor and just want to use this as a regular pc, not a touch pad
I can manage to get into device manager and 1) disable HID-compliant devices (9) and HID compliant consumer control devices (2) and the touch bubbles go away. However if I reboot the bubbles come back as the system somehow auto fixes itself.
I'm not sure if its a default program installed or what so whatever suggestions or help you guys can offer would be awesome!
Thanks

Read other answers
RELEVANCY SCORE 84

Hello, Ive been think about converting my laptop to a touch screen. i was wondering will i have to buy a whole new screen or is there another way to do so.

A:Hp-notebook non-touch to a touch screen

Hi,Manual: http://h10032.www1.hp.com/ctg/Manual/c04777516Specs: http://support.hp.com/us-en/product/HP-17-p100-Notebook-PC-series/8499335/model/8788293/document/c04...Unfortunately no touch display assembly listed compatible in your laptop model series.RegardsVisruth

Read other 1 answers
RELEVANCY SCORE 84

Hi All, some one pls help me.
1.  On my touch screen - left top corner the volume screen shown 0. This is reduced automatically.
2. The touch pad is not working - I am not able to move the cursor but can click where ever it is placed.
3. The keyboard on tablet mode is also not working.
 
this happened all of the sudden. Is there any virus or some issues with software. Pls help i am really need of a solution here.
 
Mod's Edit: Additional information added to Subject line for clarity of issue and moved posting to it own thread.
 

Read other answers
RELEVANCY SCORE 84

I bought a Lenovo G50-80 Touch Laptop, but for some reason the touchscreen is disabled and it also says that it doesn't have touchscreen on it.

Read other answers
RELEVANCY SCORE 84

So I have got a Lenovo Y50-70 with 15.6" 3840x2160 UHD Touch Display for about two years now. I've accidentaly dropped my backpack, while the laptop was in it and cracked it's screen so I need to replace it. The screen in the cracked part is working as it was working before the accident, the crack is on the glass. So I was wondering if I can replace my 15.6" 3840x2160 UHD Touch Display with a 15.6" 1920x1080 FHD Non-touch Display? Is it possible?I've read that whether screen you are changing, its working depends on the quantity of pins on the Video signal connector. 

























14805592_1377320382293084_1940252874_n.jpg ?54 KB

Read other answers
RELEVANCY SCORE 84

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: AMD A6-5200 APU with Radeon(TM) HD Graphics, AMD64 Family 22 Model 0 Stepping 1
Processor Count: 4
RAM: 3534 Mb
Graphics Card: AMD Radeon HD 8400, 512 Mb
Hard Drives: C: 453 GB (151 GB Free);
Motherboard: TOSHIBA, Portable PC
Antivirus: Windows Defender, Disabled

First of all I was running Windows 8 everything was fine. Upgraded to Windows 8.1 everything was good at first. Months after doing so my touch screen started acting up. It would only work when I position the screen a certain way. So I stopped messing with it because I thought it was a wiring problem inside the computer. I would fix it later, And then sadly I upgraded to Windows 10. I noticed shortly after there was no touch screen options at all. It says there is no Pen and Touch. Today it was listed in the control panel so I started messing with it. Drivers were there all up to date. They said the Device did not migrate. It was 2 or 3 drivers listed for the touch screen and they all said the same thing. After a restart they were no longer in the device manager and no options in the control panel anymore. Please help me figure this out... Thank you.
 

A:Touch screen/Pen and Touch not working

What's the model name and complete model number of that Toshiba?
(2 sets of characters separated by a dash comprise the complete model number)

If that Toshiba wasn't tested for and doesn't provide driver support for Windows 10, you can expect some of its devices not to work properly or not work at all.
That tends to be more of a problem with laptops than it does with desktops.

-------------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 83.6

Yesterday I was on my laptop and before I shut it down it went into what looked like a different mode. I booted it up this morning and it is still in this mode. It looks like touch screen mode but I do not have a touch screen.  The icons on the task bar are spaced out and there is a back button on the task bar too which is not normally there. When i right click against the task bar, one of the buttons says "Show touch keyboard button".  All of my files are spead out as if to have room for touching if I had a touch screen but I do not. I am finding this very annoying because I cannot get onto my desktop properly and is not in the right mode. Please help! 

Read other answers
RELEVANCY SCORE 83.6

My touch screen stopped working about 2 months ago after an update and it came back then stopped again. I chechd for testing it in UFEI Bios and it is not listed. How can I get the correct bios and there are no drivers to update, the hid-touch screen driver says it fine.  Its been working fine for 2 years. Could the bios been changed?I downloaded the UFei bios that was on your site but it still didn't show up there. I tried a setup in windows but touch screen isn't working to calibrate.

Read other answers
RELEVANCY SCORE 77.6

I have an acer aspire M3 581T-6405 series ultrabook, but my screen is broken. Can I replace it with a touch screen from an Acer Aspire M5-583P-6428? Whether the touch screen works as a touch screen or not is irrelevant I just want to be able to use my laptop.

Read other answers
RELEVANCY SCORE 77.6

I bought an hp 15-ac121dx for a friend* a while back, but not long ago. A few days ago she called me to tell me, when she got home the laptops screen was cracked and spoilt. so, I checked the price for a new touch screen replacement, and low and behold: its freaking expensive. All I want to know is: can I buy any of the old LCD or LED laptops screens and replace it?    

A:Can I replace touch screen with non-touch screen

 Hi @johnlightrex, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community! I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP 15-ac121dx Notebook and needing to know about the LCD touch panel replacement.  Here is a link to your service manual page 31, this shows me you can replace the LCD panel with a non Touchscreen. Part number 747131-001.  Please let me know how this goes. You can say thanks for trying to help by clicking the Thumbs Up below! Thanks..





Please click ?Accept as Solution ? if you feel my post solved your issue, it will help others find the solution.Click the ?Kudos, Thumbs Up" on the bottom left to say ?Thanks? for helping.I work on behalf of HP

Read other 6 answers
RELEVANCY SCORE 77.6

This has a built in CPU (i5) with Win7 32bit installed. The IDS touch screen was working fine, the it stopped
working. The thing is, the Touch screen calibrates fine using Elo calibration software for spotting the corners of the screen but when you do the mouse check, it does not recognize moving the cursor or selecting anything. I suspect a Win7 problem so where would a good start point be?

A:Elo 55" Interactive Digital Signage Touch Computer touch problem

Without knowing much about your system, I would say the first thing to look at is maybe update or reinstall your drivers.

Read other 2 answers
RELEVANCY SCORE 77.2

Haven't updated your laptop's trackpad driver lately? Then you may well want to consider doing so, at least if your laptop is equipped with a Synaptics trackpad. As a user on the Hardware Zone forums discovered, the latest Synaptics driver seems to enable multitouch gestures on older laptops that didn't previously support them, including two-finger scrolling, and three-finger click. What's more, while the drivers themselves come from HP, they should work just fine on other laptops with a Synaptics trackpad. Hit up the link below to try it out for yourself.
Source: Synaptics driver enables multitouch gestures on older trackpads -- Engadget

p.s. working on my P7805u perfectly.

Download directly from HP:ftp://ftp.hp.com/pub/softpaq/sp47501-48000/sp47815.exe

A:Touchpad Driver that Unlocks Multi-Touch on older Touch

Thanks for posting this Martee I'm sure it will be of use to other members. Just one question am I the only one that can't get the download link to work? Fabe

Read other 3 answers
RELEVANCY SCORE 77.2

I have a friends laptop that the synaptic touchpad gets extremely hot and PC doesn't reconize it. Vista 32 home basic, have downloaded drivers and to no avail. doesn't even recognize a mouse plugged into a USB.
 

A:Dell Inspiron 1525 hot to touch not working synaptic touch

Read other 6 answers
RELEVANCY SCORE 76.8

I've had this machine about about a week, so far I really like it.  Can't say yet that I love it yet, but it does what I need it to and the price is better than a tablet with the same functions and already has a keyboard.  This machine is kept in a padded case when not used in my desk drawer it does not bounce around in my briefcase etc.  
This morning the left button on the touch pad does not work.  At first glance it sort of looks like it is caught on something or stuck, the right button works great a broken switch under the button is also possible but this thing doesn't move at all I'd think a switch would still move just not contact properly inside.  I need my machine and I've made a couple of upgrades like a SSD for the stock hard drive and a 8 gig ram chip, I am not thrilled about pulling those components in order to return for warranty replacement etc. as I'm pretty sure you won't be returning the same machine I sent in.  I'm considering pulling it apart to see if it is indeed stuck so it can be pushed back out from the inside but if this is a common issue with this machine I'd like to know that...  
Can I be sent a new touch pad component, I believe I saw this is a separate board that attaches to the motherboard with a ribbon cable?  I'm not afraid of this procedure myself as I've been building desktops since the 90's and this is a really simple hardware to work on from the looks o... Read more

A:New week old Inspiron 11 3000 3558 (touch) stuck or broken button on touch pad--warranty parts replacement?

This is an fyi about the final resolution of this issue.  After a lot of arguing dell sent me what was supposed to be the touchpad but what I got was only the plastic palmrest no touchpad. Then because it's a "daughter card" I got more argument about the touchpad.  I got hot enough that I opened up the back, lifted out the battery, took out the two funky looking screws and the whole pad just fell right out of the machine.  The buttons seemed fine so I screwed it back down, put the battery back in and closed it up.  It's now great, the button was indeed hung up on the edge of the plastic palmrest.  This is a very well designed inside machine, it all screws down and all connections are with plugs or ribbon cables.  I wrote back to dell and told them they need to fire their tech manual writers because they're idiots, a monkey could have done this.  Apparently it is not easy to find only the mouse pad it's generally sold with the palmrest from what I can tell.  This whole machine is so well designed I scratch my head why the cpu isn't socketed unless they decided there was no room for a socket etc, which I can see that argument.  So if your mouse pad quits try popping it out first it may just be hung up.

Read other 1 answers
RELEVANCY SCORE 76.4

My X220 tablet comes with pen and limited touch support with 2 touch points. I have no issues on windows 7 but on windows 8.1 it has changed to be working with only 1 touch point since some time that I don't remember exactly when. So that I can work with one finger only and 2-finger functions such as pinch to zoom are unavailable. My drivers are all uptodate. I think I should completely uninstall the related driver before reinstalling but don't know how to procede and couldn't find the solution. I tried uninstalling all HIDs through Device manager and one-by-one, specifically wacom device. when I uninstall it, I lose touch option completely. but reinstalling through Device Manager sounds like recovering exactly the previous faulty condition. Maybe there is a conflict with windows 8.1 like Microsoft Input Configuration Device which might be unlikely.  So is there any other way to have full wipe and clean reinstall of those touch screen drivers? I appreciate it if you put links to the drivers for me, if they are not available on Lenovo Support. Tell me if you had the same touch issue in Windows 8.1  and how you solved it. Thanks 

























Device manager.JPG ?72 KB

Read other answers
RELEVANCY SCORE 75.2

hey guys,

having a Samsung S6 for about 15 months, recently Touch Wiz sits in my way.

I use CM Launcher which i like vey much, but cannot get rid of both Touch Wiz apps.

Today i rooted my phone, but right now i do not know how to take full advantage of this.

Any help much appreciated.

Superuser was installed but does not work. Error prevents this app from working...

So all i want to do is take control over my phone and remove some programs like What's App, S Health, S planner etc.

Thanks

Jeff

A:Galaxy S6....how to ditch Touch Wiz and touch Wiz Easy

Try Package Disabler Pro from the Playstore and you don't need to be rooted for it to work.

Read other answers
RELEVANCY SCORE 75.2

I just did a fresh install of Windows 10 on this HP Stream notebook.  Now the touch pad quit working.  And when I go into Device Manager to try and fix it and update the driver for the touch pad, there is not even that option.  Touch pad does not exist in the section for mouse and pointing devices.  Only the generic mouse I am using now appears. How can I fix this?Thank you!

A:Touch pad quit working. Touch pad does not show up in the l...

Yes, you have to install the Intel chipset drivers from hp.com for the touchpad to work after a fresh install on the Stream notebooks. Run the driver execuatable files, don't try to update it from Device Manager.

Read other 1 answers