Over 1 million tech questions and answers.

BSOD: A process or thread crucial to system operation has unexpectedly exited or ....

Q: BSOD: A process or thread crucial to system operation has unexpectedly exited or ....

Hi

I ran Auslogics Boost Speed Registry Defrag - yes I know, I know.

I now have a persistent BSOD.

I cannot Boot into Safe Mode or any other mode.

Startup Repair picks up no errors.

sfc /scannow returns the following

Beginning system scan. This process will take some time.
There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again.

This is impossible as the only way to access Command Prompt is via Repair options.

The full BSOD is:-

A process or thread crucial to system operation has unexpectedly exited or been terminated.

*** STOP: 0X000000F4 (0X0000000000000003,0XFFFFFA8003AA03DO,0XFFFFFA8003AA06BO,0XFFFFF80002D84670)

I think I have narrowed down the problem. Auslogics has managed to screw up the process of migrating my new defragged Registry and I can find no way of getting my old one back.

System Restore does not work as it tells me I need to enable it on the drive (it is enabled - all my restore points are there but the check box next to my windows drive is greyed out)

After using Hiren's Boot CD's mini XP I have managed to locate a log file generated by Auslogics at the time of the crash. I have pasted the contents below.

******************

Program started 16/05/2009 at 16:35:17.
OS Version: Windows Vista Ver 6.1 Build 7100.
Windows Directory: C:\Windows\.
Windows System Directory: C:\Windows\system32\.
Windows Temp Directory: C:\Users\The BORG\AppData\Local\Temp.
User: The BORG.
You have 319964573696 bytes on a disk, 194043957248 bytes free.
You have 2682773504 bytes in memory, 1622474752 bytes free.
Work Directory: C:\Program Files (x86)\Auslogics\AusLogics BoostSpeed\.
Program Version: 4.1.4.135.
Language: EN.
A registry file C:\Boot\BCD with size 0 bytes was found.
A registry file C:\Windows\System32\config\SYSTEM with size 13107200 bytes was found.
A registry file C:\Windows\System32\config\SOFTWARE with size 64487424 bytes was found.
A registry file C:\Windows\System32\config\DEFAULT with size 3407872 bytes was found.
A registry file C:\Windows\System32\config\SECURITY with size 262144 bytes was found.
A registry file C:\Windows\System32\config\SAM with size 262144 bytes was found.
A registry file C:\Windows\ServiceProfiles\NetworkService\NTUSER.DAT with size 262144 bytes was found.
A registry file C:\Windows\ServiceProfiles\LocalService\NTUSER.DAT with size 262144 bytes was found.
A registry file C:\Users\The BORG\NTUSER.DAT with size 6029312 bytes was found.
A registry file C:\Users\The BORG\AppData\Local\Microsoft\Windows\UsrClass.dat with size 2621440 bytes was found.
Program Temp Directory: C:\Users\THEBOR~1\AppData\Local\Temp\.
A copy of the registry file $BCD1.tmp with size 24576 bytes was created.
A copy of the registry file $SYSTEM1.tmp with size 13541376 bytes was created.
A copy of the registry file $SOFTWA1.tmp with size 9347072 bytes was created.
A copy of the registry file $DEFAUL1.tmp with size 3280896 bytes was created.
A copy of the registry file $SECURI1.tmp with size 24576 bytes was created.
A copy of the registry file $SAM1.tmp with size 131072 bytes was created.
A copy of the registry file $NTUSER1.tmp with size 258048 bytes was created.
A copy of the registry file $NTUSER2.tmp with size 249856 bytes was created.
A copy of the registry file $NTUSER3.tmp with size 5939200 bytes was created.
A copy of the registry file $UsrCla1.tmp with size 2400256 bytes was created.

*************

Is there a way I can manually restore these files? I cannot even seem to find them.

This truly is a nightmare. By the way my OS is Windows 7 RC x64.

I suppose the 2 fixes I wish to investigate are:-

1. Manually invoking a System Restore Point (or at least ascertaining whether or not they do or do not exist)
or
2.Restoring the Registry only if this too is possible.

Option 3 will of course be a fresh install.

On a side note of preventive measures; what is a good free way of taking a complete image of my PC so if this happens again it will be no great shakes? Is the backup and restore centre up to the job or should I use 3rd party?

Most grateful as always for any help.

Kind regards

Chris

RELEVANCY SCORE 200
Preferred Solution: BSOD: A process or thread crucial to system operation has unexpectedly exited or ....

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD: A process or thread crucial to system operation has unexpectedly exited or ....

After checking the file sizes of DEFAULT, COMPONENTS, SAM, SECURITY, SOFTWARE and SYSTEM files - it appears that only some of them have been modified. Unfortunately some of the file sizes are about 75% smaller which says to me that my BSOD occurred at the worst possible moment.

Still grateful for any suggestions but I reckon a fresh install might be in order.

Read other 3 answers
RELEVANCY SCORE 210.8

Dell Inspiron Windows 7 SP1 continue to get the BSOD window. Tried reset system to factory default, update BIOS and all available Hardware drivers on the system and still having this problem. Any help would be greatful.

Thank you in advance

Read other answers
RELEVANCY SCORE 202

Hello,
My computer has been showing the following blue screen error for a few months now,



***start of error message****
A problem has been detected and windows has been shut down to present damage to your computer.




A process or thread crucial to system operation has unexpectedly exited or been terminated.



If this is the first time you've seen this stop error screen.



restart your computer. If this screen appears again. follow these steps:



Check to make sure any new hardware or software is properly installed.



If this is a new installation, ask your hardware or software manufacturer For any windows updates you might need.



If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.



If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe Mode.



Technical information:



*** S"color:#222222;font-family:Arial, Helvetica, sans-serif;font-size:small;">


collecting data for crash dump ...



Initializing disk for crash dump ... 



Beginning dump of physical memory.


Dumping physical memory to disk: 75




*****end of error message******
*
On restarting the computer I received the following problem details :


***start of problem details****
Problem signature:
  Problem Event Name: BlueScreen
&... Read more

Read other answers
RELEVANCY SCORE 202

I keep experiencing BSOD "A process or thread crucial to system operation has unexpectedly exited or been terminated."
Windows 2003 Standard Edition.
I have a lot of applications on it that is hard to get the setups.
Can Setup repair solve this problem?
I will be glad if you can be of help pls

Read other answers
RELEVANCY SCORE 160

Greetings,i've been constantly been having blue screens and freezes non-stop,and since i've once fixed a problem with the help of this website,i trust that i can get some help again.
Ok,lets start from the beginning,about 20 days ago i went on a trip for holidays,a few days earlier i'd cleaned my computer's cooler fan,usual stuff.
Now,as i've come back,my computer has been unusually slow and having non-stop blue screens and freezes,to the point where i sometimes have to restart it several times for it to last more than start-up.
Also apologize for the bad quality of the photo and the occasional mixed up languages in my attached file,as my computer language is set to Portuguese. I've tried running blue screen view,but the program shows no signs of anything like nothing was happening,which is very unusual as it has helped me solve many issues before.
On a side note,i've been having my Utorrent randomly close its process for no reason,and malware bytes has shown no signs of problems. Kinda gave up on doing a complete scan with Avast anti-virus because my computer often blue screens before the scan can even get to 1%,but i will try to help as much as i can.
I await for responses

Read other answers
RELEVANCY SCORE 144

I've getting occasional BSOD lately. They sometime occur only a day a part, sometimes a week. It started I'd say a month or so ago, which was also couple weeks after I had reinstalled Windows 7, which I did after an uninstall of Office 2013 seemed to have not completed correctly, and had also never gotten most of the preinstalled junk of this laptop anyways. I think I installed all the necessary drivers. All hardware functions correctly and nothing is missing in Device Manager.

Every time it is the same message "A process or thread crucial to system operation has unexpectedly ended". So far I have ran scans with MSE, MBAM Pro, and WDO, which have found no signs of viruses or other malware. I have run sfc /scannow, checkdisk and every scan that Seatools has. No problems have been detected with the harddrive, sfc found no integrity errors. Last night I had memtest86+ running off of a usb drive run for 7 passes. No errors were found. I went through Event Viewer and found nothing that seemed related. I checked and all my drivers seem to be up to date.

I hope I included all necessary information. My system specs are up to date. The three dumps I have are attached below. I had deleted the older ones with ccleaner without thinking. If I left out anything, let me know. Its been a while, since I've done much troubleshooting on a computer, so I might be overlooking something.

Attachment 275670

EDIT: Sorry, I didn't see about the diagnostic tool (which seems amazing bt... Read more

A:BSOD process or thread crucial to system operation has ended

Your BSODs are hard drive related

bsod F4

Use the link below to test your hard drive

SeaTools for Windows | Seagate

Read other 9 answers
RELEVANCY SCORE 142.4

Hi All!

This problem has recently cropped up on my computer (2 days back) when I was re-installing windows (clean start).

Specs:
Win 7 64 bit...with latest updates.
Motherboard: Gibabyte GA-X58A-UD5
RAM: 12GB 1333Mhz Corsair....brand new.
Procerror: i7 930.
SSD: OCZ Vertex3 240GB
3 1TB WD hard drives (no RAID) of which 2 are good & one is failing (smart criteria).
Hard Drive Model: WDC WD10EARS -00Y5B1

The minidump & xml files:
 

A:BSOD: Process or thread crucial to system operation has been unexpectedely termimated.

"3 1TB WD hard drives (no RAID) of which 2 are good & one is failing (smart criteria)"... Remove the drive that is failing SMART status immediately! It could be the cause of this problem all by itself
 

Read other 7 answers
RELEVANCY SCORE 104.8

Hi,

My new computer has been having problems with suddenly crashing while I'm watching movies, downloading movies, performing a virus scan test, listening to music etc. I will be in the midst of doing one of the aforementioned tasks and suddenly it crashes and leads me to the BSD with either of the following messages;

A problem has been detected and windows has been shut down to prevent damage to your computer.

A process or thread crucial to system operation has unexpectedly exited or been terminated.

Follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new install, ask your manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hard or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select safe mode.

Technical Info:
***STOP: 0x0000007A (0xC07B9BD0, 0xC000000E, 0xF737A40A, 0x1F5F5860)

Beginning dump of physical memory...

or

Kernel_Stack_Inpage_Error

***STOP: 0x000000077(0xC00000184, 0xC0000185, 0x000000000, 0x0025E000)

Beginning dump of physical memory...

The specs on my computer are as follows;

AMD Athlon 64 Processor - Duo Core
3500+
2.21GHz, 1GB RAM,
Motherboard: NF4X
Graphics: GForce7300GS Power-Full 256MB
HDD: SATA 160G (7200.7/2M)
Windows XP Professional, SP2

I checked my event... Read more

A:BSD - A Process or thread crucial to system..

I would first suspect that you have an overheating problem. Very random errors can be produced by that.
 

Read other 1 answers
RELEVANCY SCORE 77.2

Hello all. I've tried several things to no avail. I need some extra help.A friends PC is getting this error: STOP: c000021a [fatal system error]Windows Logon Process system process terminated unexpectedly with a status of 0x00000080' (0x00000000 0x00000000).The System has been shut down.What occurred before this error popped up:1. Upgraded dvd43 software, booted, and this error came up.I have tried multiple things.1. Ran the bootfix2. Tried the Recovery Console with their diagnostics3. Tried to get to Safe Mode and it will not load, goes back to this message.4. Tried to overlay the XP image (refresh it), no avail, back to the same message.I haven't found anything on the web that can help me so far. Looking to take the next step and ask for help.

A:Windows Logon Process system process terminated unexpectedly with a status of 0x00000080

0xC000021A: STATUS_SYSTEM_PROCESS_TERMINATEDThis occurs when Windows switches into kernel mode and a user-mode subsystem, such as Winlogon or the Client Server Runtime Subsystem (CSRSS), is compromised. Security can no longer be guaranteed. Because Win XP can?t run without Winlogon or CSRSS, this is one of the few situations where the failure of a user-mode service can cause the system to stop responding. This Stop message also can occur as a result of malware infestation or when the computer is restarted after a system administrator has modified permissions so that the SYSTEM account no longer has adequate permissions to access system files and folders.I've never gotten this particular error...but if I did, i would treat it as a malware situation until proven otherwise.Louis

Read other 3 answers
RELEVANCY SCORE 77.2

My system is infected. I have tried Malaware bytes & SUPERAntiSpyware. they don't help.I tired the online kaspersky scanner that show the infected files. I am stuck there. I need help removing it.Here are the logs--------------------------------------------------------------------------------KASPERSKY ONLINE SCANNER 7.0: scan report Thursday, September 16, 2010 Operating system: Microsoft Windows XP Professional Service Pack 3 (build 2600) Kaspersky Online Scanner version: 7.0.26.13 Last database update: Wednesday, September 15, 2010 20:54:11 Records in database: 4215433--------------------------------------------------------------------------------Scan settings: scan using the following database: extended Scan archives: yes Scan e-mail databases: yesScan area - My Computer: C:\ D:\Scan statistics: Objects scanned: 205392 Threats found: 31 Infected objects found: 74 Suspicious objects found: 0 Scan duration: 06:01:45File name / Threat / Threats countC:\Documents and Settings\Administrator\Start Menu\Programs\Startup\ific.exe Infected: Trojan-Spy.Win32.Zbot.akms 1C:\Documents and Settings\McAfeeMVSUser\Start Menu\Programs\Startup\neutmy.exe Infected: Trojan-Spy.Win32.Zbot.akms 1C:\Documents and Settings\sriram\Application Data\Sun\Java\Deployment\cache\6.0\12\1dd6a40c-385253ba Infected: Exploit.Java.Agent.f 1C:\Documents and Settings\srira... Read more

A:dsNcService.exe has exited unexpectedly

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. You can subscribe by clicking the Options box to the right of your topic title and selecting Track This Topic.Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 2 answers
RELEVANCY SCORE 76

Hello, I am trying to isolate what happened when a power failure last night took down my desktop. I haven't had problems with this computer in two years(and haven't had a power outage in about as long amazingly, one of the few benefits of a drought I guess). Based on what I have found, it is a hardware failure. The error is the:

"A process or thread crucial to system operation has unexpectedly ended"

I have been trying to figure out how to read the minidump files with no success and I would like to get my desktop up and running as soon as possible.

Here are some of the symptoms I am seeing. When booted on, two harddrives always show of my four(two 1 TB, 2 SSDs of different makes, one of which is the primary OS drive). The F and C always show, but the other two often do not. Except when I ran Seagate tools. From what I can tell, both of them are on the same pair of ports to the motherboard. The two that do not show up normally, return a bunch of errors on the SeaTools scan for logs reporting and barely function scan wise and won't scan through SMART scan.

The D and E drives almost seem to randomly lose connection.

The computer BSODs on reboot so far approx 50% of the time of 4 boot ups. CHKDISK /F /R returned no errors.

Based on my information and knowledge, I would assume the motherboard is damaged. But without more information I can't tell.

Attached are the Minidump files.

A:Crucial thread failure BSOD after storm caused power outage

So, if you switch the cable from one of the "working" drives, to one of the drives that isnt showing up, does it show up?

Read other 5 answers
RELEVANCY SCORE 70.8

I'm at my wit's end here. I've cleaned up all temporay files, and run Spybot & Ad-Aware in safe mode, and also run the Stinger app. It dosen't happen all the time, but most times when I boot up in Windows 2000 SP4, the system hangs until I get an error message: <process has already exited> has generated errors.In another popup window below, Dr. Watsyn says it couldn't attach itself to the error because the program had already terminated. After that the computer runs normally. Can anyone hlep me fix this?Logfile of HijackThis v1.99.1Scan saved at 11:49:55 AM, on 1/31/2006Platform: Windows 2000 SP4 (WinNT 5.00.2195)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINNT\System32\smss.exeC:\WINNT\system32\csrss.exeC:\WINNT\system32\winlogon.exeC:\WINNT\system32\services.exeC:\WINNT\system32\lsass.exeC:\Program Files\Panda Software\Panda Titanium 2006 Antivirus + Antispyware\TPSrv.exeC:\WINNT\system32\svchost.exec:\program files\panda software\panda titanium 2006 antivirus + antispyware\firewall\PNMSRV.EXEC:\WINNT\system32\spoolsv.exeC:\WINNT\system32\svchost.exeC:\Program Files\Panda Software\Panda Titanium 2006 Antivirus + Antispyware\PavFnSvr.exeC:\Program Files\Common Files\Panda Software\PavShld\pavprsrv.exeC:\Program Files\... Read more

A:<process Has Already Exited>

Before anyone wastes time on my problem, I'm 95% sure I've fixed it. I downloaded a freeware app called StartUpCPL that alows one to view and disable startup processes. Through trial and error, I've tracked my problem to 'VTTimer.exe'. This is totally my bad, because this process comes packaged with a set of default S3 Graphics drivers, which I was warned may not work properly with my system. Live and learn.

So not a malware problem, but a hardware/drivers issue.

Read other 2 answers
RELEVANCY SCORE 69.2

how do correct this, if i can't access any of my user accounts, including the administrator user account as well? The user account logons but terminates unexpectedly on my eMachine...I am using Windows XP. Thank you for any help at all!

Computneticz
 

A:Windows Logon System Process terminated unexpectedly

If you can boot to safe mode, you might be able to fix the problem. If you can't, you might need to do a repair install of Windows XP.
 

Read other 1 answers
RELEVANCY SCORE 69.2

To preface this: I installed software yesterday on my Dell Inspiron 9400 w/ Windows XP Home and since then I cannot log on. I have a bit of a background in computer repair and I'm familiar with the recovery console so I was hoping I could activate the system restore from there. Safe mode is not an option. What I believe happened is that I had SP2 and not SP3 and the software was only compatible with SP3, though I can't verify right now or I don't know how. Is that possible without booting to find out? I have a good deal of my machine backed up but I am fighting for the most recent two months' work. Would very much appreciate any help!

- Windows XP Home on Dell Inspiron 9400 with SP2* I think
- Error: "STOP: c000021a" Windows logon process system terminated unexpectedly at 0xc0000022.
- Software installed was Avid Pro Tools SE

I don't have access to an XP disc right now but I can within a day or two thanks to my school. As I mentioned I have an external with 90% of my critical data on it already; if it were possible to manually extract the files I want to salvage by copying them to the external I would love to try that also. However, the problem I've encountered is "Access Denied" when trying to navigate to the documents and settings folder. Is having an XP cd a prerequisite for going into recovery console and trying this stuff? I will work on getting one. Thanks ahead of time.

A:windows logon process system terminated unexpectedly

Hi and welcome to TSF you could try hooking up to a usb external caddy and connecting to another computer or even this Use Ubuntu Live CD to Backup Files from Your Dead Windows Computer - How-To Geek

Read other 5 answers
RELEVANCY SCORE 69.2

ok my pc has been getting BSODs quite often and i havent been able to fix it yet.. but today i got a different type of BSOD. im not big in computer tech so i didnt have a clue on what it is and disregarded the numbers..:/

Also i have been getting regular BSODs for about 2-3 months now and i even tried reformatting which didnt help...

im running free avg antivirus and some people say thats the cause.. but i run the same antivirus on my laptop and it works just fine

i have uploaded the file from C:\windows\minidump

im running win7 home premium 64bit original (full retail)
comp is about 6months old
latest re-format was about a month
anyhelp will be greatly appreciated

A:The Windows Subsystem system process terminated unexpectedly

The only memory dump dates from 16 Jan 2012.

No Windows Updates after SP1 - most systems have 70 or more. Please visit Windows Update and get all available updates.

We've seen a number of BSOD issues with SSD's recently. Here's the information that I've compiled:





Quote:
There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.-
Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs... Read more

Read other 1 answers
RELEVANCY SCORE 69.2

I posted I had fixed my problem, but I was wrong. I was disabling/enabling the VTTimer.exe process, and the Dr. Watson errors were coinciding with when the process was enabled. But a couple of boots later, my set of errors were reappearing with the process disabled. To recap my problem, about every 2nd startup (and sometimes consecutively) into Windows 2KSP4, the system will hang at the desktop screen. After login, the active desktop loads, the task bar and icons appear, and in the system tray, the volume controls load, along with network connection icon, daemon tools, and Panda antivirus. After Panda is loaded, is usually where the system hangs for a few minutes. I can move my mouse around and select desktop icons, but I cannot start any programs, or get into my Start menu. Then I get a 'Program Error' popup with has generated errors. Below it is another popup with a 'Dr. Watson Fatal Error'. I get error code 87, 'parameter is incorrect', but no error log is produced because the program had terminated before Dr. Watson could attach itself. I've run the updated Spybot & Ad-Aware programs in safe mode, and even Stinger, but to no avail. I would suspect that Panda is the culprit, only it has been installed for a while before I started getting this error. This is really a pickle of a situation where I can't even figure out which program is causing my woes. The Microsoft Knowledge base explains the error fine enough, but offers no suggestions on how to tra... Read more

A:Still Plagued! <process Has Already Exited> Error

I hate to sound like a geek, but this morning I remembered what Spock said. "Eliminate the impossible,whatever remains, however improbable, must be the truth." So this morning I uninstalled Adobe Acrobat 5, Daemon Tools, and Panda Titanium Antivirus 2006 trial. My mistake is that I didn't uninstall them individually. After many several reboots, both soft and complete from power down, the fatal error has not returned.I do remember seeing a message that Panda had neutralized some adware when I installed Daemon tools originally. I don't know if that has anything to do with my problems, but I thought I'd throw that out there. It will be later this evening before I can start tinkering with the pc again. I thought I'd post a fresh HijackThis Log, and see if I get any tips before then. (This is a PC I'm setting up for a friend's son, and he's anxious to get it back.)PS. Am I in the running for shortest log?Logfile of HijackThis v1.99.1Scan saved at 11:09:59 AM, on 2/1/2006Platform: Windows 2000 SP4 (WinNT 5.00.2195)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINNT\System32\smss.exeC:\WINNT\SYSTEM32\winlogon.exeC:\WINNT\system32\services.exeC:\WINNT\system32\lsass.exeC:\WINNT\system32\svchost.exeC:\WINNT\system32\spoolsv.exeC:\WINNT\system32\svchost.exeC:\WINNT\system32\regsvc.exeC:\WINNT\system32\MSTask.e... Read more

Read other 2 answers
RELEVANCY SCORE 68.4

BSOD: The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000, 0x00000000)

I'm getting this on a shop system running Win 7 Home Premium 32 bit. The last thing I did was shutdown before going home and I believe it installed an update then shutdown, so I'm suspecting the update caused the problem.

I can't get into the F8 Safe Mode screen to try Last known good configuration so I think I'll try a System Restore from the install DVD. Does that sound like a good approach?

Any other suggestions?

Sorry I don't have the specs with me but I think it's a 2.8Ghz Dual core Intel with 4GB RAM and two SATA drives. It's been running fine for about a year.

A:session manager initialization system process terminated unexpectedly

If you can boot into the computer by what ever means just delete the last update and re boot and see if that helps.

Read other 9 answers
RELEVANCY SCORE 68.4

I accidentally exited out of the Explorer.exe SYSTEM process when i ment to exit out of the browser one and now i don't have a start bar!

I was wondering if anyone knew how to restart the explorer.exe SYSTEM process... I really don't wanna tell ymy parents till i know i have to go to them.

A:[SOLVED] Explorer.exe process accidentally exited

Hi and Welcome To TSF

Luckily there is an easy way to fix this problem, if you are running XP. You can do this with other OS's but I am better with XP. First report back with which OS you are running. In XP you can do:

1. CTRL+ALT+DEL
2. Click Task Manager
3. Click File
4. New Task Run
5. Type "explorer"

* This should fix your problem *

Read other 9 answers
RELEVANCY SCORE 68

Can anyone out there help me with the following message:

?The system process c:\windows\system32\services.exe terminated unexpectedly with status code -2147483645?

The message window also informs me that the message was initiated by the ?NT Authority\System?.

My PC is running slower than a turtle! Your help is appreciated!

Thank you!

A:“The system process c:\windows\system32\services.exe terminated unexpectedly with s

I'm not sure this applies to you, since it's a different exe but I found
this on google It's not much tho and aboutg the only thing I can find, maybe one of the more advanced people can explain more. Oh and check for viruses at www.trendmicro.com

Read other 2 answers
RELEVANCY SCORE 68

Hey All,

I'm having problems upgrading from win 98 to xp. The install seems to go through ok however on the reboot the system makes it to the XP splash screen and then I get the message:

the session manager initialization system process terminated unexpectedly with a status of 0xc0000034

Does anyone have any ideas? The system meets the min requirements.

Joe
 

Read other answers
RELEVANCY SCORE 67.2

Hi All,
I am a newbie here
I get a bluescreen error on my computer:
stop:c000021a{Fatal System Error}The Windows Subystems process terminated unexpectedly with a status of c0000005 (0x7c9106c3 0x0069f36c) Beginning dump of physical memory Physical memory dump complete contact you system administrator or technical support group for further assistance
Any idea what is happening, please help

A:c000021a{Fatal System Error}The Windows Subystems process terminated unexpectedly wit

Boot off of the XP CD and get to the Recovery Console here type chkdsk /R and hit enter. The Check Disk utility will try and fix any errors. If that fails do a Repair Install.

Read other 3 answers
RELEVANCY SCORE 66.4

I have a problem that I have seen has occurred to others in this forum. I have tried to follow some of the advice, but without complete success.

About a week ago one of my PCs started showing this RUNDLL message on startup - "Error loading ruyopaku.dll" - and 10-15 minutes later the system would shut itself down. I would get the message "System Shutting Down. Shutdown Initiated By NT Authority System" and "DCOM Server Process Launcher Service Terminated Unexpectedly". The computer would then shut down after the 60 second countdown timer expired. For a while I was successful in stopping the shutdown by going to START/RUN/ and typing "shutdown -a". I ran an AVG antivirus scan and it found some things that I quarantined, but that did not solve the problem.

So on a recommendation from this forum, I downloaded, installed, and ran Malwarebytes which found quite a few additional viruses and trojans which I also quarantined. I no longer get the missing DLL message on startup, but the system continues to reboot itself and now even the "shutdown -a" does not stop it. I also tried hitting F8 on startup and selecting the option for "No automatic reboot on system failure" but that seems to have no effect either - the system continues to shut itself down and reboot, typically every 5 minutes or so. It's not enough time to do anything - download software, run a scan, etc.

So, the situation is that before I can downl... Read more

Read other answers
RELEVANCY SCORE 66.4

The system process 'C:\WINDOWS\System32\services.exe' terminated unexpectedly with status code -1073740972. The system will now shut down and restart
This malware keeps shutting down the computer. It started by hiding ALL of the files.
.
DDS (Ver_2011-06-23.01) - NTFSx86
Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_20
Run by Administrator at 16:48:53 on 2011-08-25
Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.1014.242 [GMT -4:00]
.
AV: Symantec Endpoint Protection *Enabled/Updated* {FB06448E-52B8-493A-90F3-E43226D3305C}
.
============== Running Processes ===============
.
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\Program Files\Symantec\Symantec Endpoint Protection\Smc.exe
svchost.exe
svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\WINDOWS\System32\WLTRYSVC.EXE
C:\WINDOWS\System32\bcmwltry.exe
C:\WINDOWS\system32\spoolsv.exe
svchost.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Broadcom\ASFIPMon\AsfIpMon.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Dell\QuickSet\NICCONFIGSVC.exe
C:\Program Fi... Read more

A:The system process 'C:\WINDOWS\System32\services.exe' terminated unexpectedly with status code -1073740972.

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/417821 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

Read other 2 answers
RELEVANCY SCORE 64.4

I have the two above BSoD errors occurring frequently.
Kernel Data Inpage Error
Process or thread crucial to system operation has been terminated

Attached DOCs from the how to post. Any help would be great!

A:BSoD Kernel Inpage Error and Critical Thread or Process

Forgot to add:
OS - Windows 7 Pro x64
? What was original installed OS on system? Same as above.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM
? Age of system (hardware) 1.5 years
? Age of OS installation - have you re-installed the OS? No

? CPU i5-2500K
? Video Card 2x-Radeon HD 6800
? MotherBoard - Asrock P67 Extreme4
? Power Supply - brand & wattage 650 Watt (forget brand)

? System Manufacturer Me!
? Exact model number (if laptop, check label on bottom)

Read other 9 answers
RELEVANCY SCORE 61.6

my computer works great. Then all of a sudden it stops and says that is is process crucial died. I already tried to fix it with powershell but it said it dosent see anything wrong with it. I don't know how else to fix it. Please help.
 

Read other answers
RELEVANCY SCORE 60.4

Hi,
My 2 month old build had been running fine (spec below), but as of a week ago has been unexpectedly restarting. This only ever occurs under a light load e.g. when using chrome or word, never when gaming. Sometimes after a restart the system also will not boot initially, with the power light on but the CPU fan has not started (restarting again results in a "normal" boot). 
I have tried stress testing the CPU and GPU (burn test / furmark) but it did not cause a restart in either case. Memory test also found no error, and the only events in event viewer around the time of the latest restart where: 
Audit events have been dropped by the transport. 0
and
Session "EventLog-AirSpaceChannel" stopped due to the following error: 0xC0000188
Can anyone suggest what the problem might be, or what I could do to diagnose it?
Thanks!
CPU intel Core i5-6600 Skylake 3.30 
GPU msi radeon R9 390
RAM HyperX Black Fury DDR4 8 GB Kit RAM Memory, 2 x 4 GB
SSD Hyper X Savage 240 GB Internal SSD Solid-State Drive
SSHD Seagate 1 TB Desktop 3.5" Internal SSHD
PSU Cooler Master GM-Series Semi Modular G650M 650W 80PlusBronze
 

Read other answers
RELEVANCY SCORE 59.6

Hey guys!

I hope you can help me. I'm using a 2007 Toshiba Tecra M5 Laptop. I've run the SF Diag Tool, so here are the details.

My laptop has thus far crashed 5 times today in a time span of 3 hours, what can I do to make this stop? Any ideas why this happens?

If you need any more details please ask.

Thank you in advance!

A:BSOD system crashes unexpectedly during normal use

Hello Sage88, Welcome to SF!

Analysis


Code:
--------------------------------------------
--------------------1-------------------
--------------------------------------------
aczbdunt.SYS http://www.runscanner.net/file/aczbdunt.SYS.html
--------------------------------------------
---------------------END--------------------
--------------------------------------------
--------------------------------------------
--------------------2-------------------
--------------------------------------------
axhsj3qa.SYS http://www.runscanner.net/file/axhsj3qa.SYS.html
--------------------------------------------
---------------------END--------------------
--------------------------------------------
--------------------------------------------
--------------------3-------------------
--------------------------------------------
at3hs49a.SYS http://www.runscanner.net/file/at3hs49a.SYS.html
--------------------------------------------
---------------------END--------------------
--------------------------------------------
--------------------------------------------
--------------------4-------------------
--------------------------------------------
amia08yy.SYS http://www.runscanner.net/file/amia08yy.SYS.html
--------------------------------------------
---------------------END--------------------
--------------------------------------------
This shows that there are unknown system files on your computer. Please do the following:






Quote:
Do a ... Read more

Read other 9 answers
RELEVANCY SCORE 59.6

Ok, I have windows vista ultimate 32-bit. I have verizon HSI and I have the games package and I wanted to play diner-dash so I downloaded it and installed and played for about an hour... then BOOM! BSOD. so I was like CRAP and let it restart and I chose let windows start normally because I thought "Its just a game so what the hey" I see BSOD for like 1/4 of a second and it restarts and I'm surprised so after it restarts I see "Windows couldn't boot" or something of that nature so I choose to boot into safe mode after all that text I get bsod while booting into safe mode.

Ok, so as you might think I'm pissed at the moment. I tried every option I could have and nothing, I had made a partition for OSx (apple dev official) and since I hadn't had much on it i reformatted it to ntfs and installed vista again... and I notice there are more options to boot from my broken vista partition, still nothing so I decided to just try to move all my files and stuff. but I cant see any of my stuff If I try to manually put in the location and I get an access denied error.


Things I need to know

1. What went wrong
2. Can I fix it
3. How can I fix it

-OR-

Can I get my files programs, and settings back?

A:eXITED A GAME AND BSOD, THEN AGAIN AND AGAIN AND AGAIN

Quote:





Originally Posted by goohman


Ok, I have windows vista ultimate 32-bit. ... I wanted to play diner-dash so I downloaded it and installed and played for about an hour... then BOOM! BSOD. . . it restart and I chose let windows start normally . . . I see BSOD for like 1/4 of a second and it restarts and . . . I see "Windows couldn't boot" . . . I get bsod while booting into safe mode.

. . .so I decided to just try to move all my files and stuff. but I cant see any of my stuff If I try to manually put in the location and I get an access denied error.

Things I need to know
1. What went wrong
2. Can I fix it
3. How can I fix it

-OR-

Can I get my files programs, and settings back?





Hi. . .

Hold tight... don't do anything further with your system just yet. The answers to your questions are:
1. I do not yet know
2. Very possibly - if I can obtain additional information
3. Let me definitively answer #2 first and then hopefully, I will be able to tell you
last Q - I do believe so, but I need additional information first


I need some clarification on this situation if you don't mind, please. . .
1. Can you boot into Windows at all - SAFEMODE or regular?

2. Do you know how to get to a command prompt (c:>)?
(it should have been one of the options when you attempted to boot into SAFEMODE).

3. Do you have an administrator's account or have the password to one?

4. Did you o... Read more

Read other 7 answers
RELEVANCY SCORE 58.8

Before I ask my question, I'd just like to say that this is an entirely recreational refurb job I'm doing and I expect it to take a while. This thread may hang around and resurface periodically over the next couple of months.

Tonight I aquired a nice little PC that appears to be a professionally designed custom system based on, what appears to be, a "Sapphire Axiom A3-M275" micro-ATX mobo with an AMD Duron CPU.

It does not work. I got it at work when a customer decided to toss it out and buy a new prefab system. My coworkers who tried to save the system believe that it is a massive system failure involving both the mobo and the hard drive. (I generally don't think highly of them, and given the time I'd like to test that theory )

Set it up myself tonight. It has no RAM (my system doesn't use DDR) but I figured I could at least bring up BIOS mode. No luck. CPU fan (plugged into mobo) runs, but there is no monitor response. No beep codes, no HD activity that I can tell. There are no error code lights on this board.

The weirdest thing is, when I press the power switch the power _and_ HD light on the front of the case both stay on steadily, with no indication of activity on the part of the HD light. What does that mean? (Q #1.)

Also, holding down the power switch does not power down the system like it does on my personal Dell machine. I have to unplug to power down. Is that desired operation? (Q #2.)

Any suggestions on where to go from her... Read more

A:Operation AMD (yet another refurb help thread)

Read other 9 answers
RELEVANCY SCORE 57.6

I am havig some system tray icon problems after installing anti-virus and spyware software. Looking for a fix for the disappearing system tray icons at initial start-up. Quick fix--log off and on again--icons reappear where they should. I am told that this disappearing activity is due to a Windows XP "BUG". What a problem! Any ideas for a secure, lasting fix out there? After the spyware and antivirus software installation, the computer star-up time is now really SLOW too. The software launches seems to be in conflict with each other, or something. Have emachine--T3406, Windows XP Home 2002, Service Pack 2. 1.23 GB RAM.

Thanks, ComputerMaven
 

Read other answers
RELEVANCY SCORE 57.6

I've got an HP 1350 scanner/printer. Suddenly my printer stopped working. When i tried to reinstall the software and printer, i received this message..."The I/O operation has been aborted because of either a thread exit or application request" I don't know how to fix this. Can anyone help me..its really frustrating. I'm not sure what to do.
 

A:The I/O operation has been aborted because of either a thread exit or application req

try uninstalling the software before reinstalling it. it sounds like there is some program running in the background that is interfering with your printing software. if you want to be safe, i would uninstall in safe mode.
 

Read other 1 answers
RELEVANCY SCORE 57.6

A service is reported as having an unexpected error code
Cause: One or more services has failed. The service did not stop gracefully, suggesting the service may have crashed or one of its components stopped in an unsupported way.
Details: Service exited with code not equal to 0 or 1077
Resolution: Restart the service

Hi, I seem to have some kind of a problem with my computer, but I have no idea what it could be. I generated a system health report because I was curious to see the results, and here I am baffled by this error. Could someone please help me with this? I do not know if it is a hazardous problem for my PC or not, but I thought it would be wise to check in with the forums.
Just to clarify, I have win 7 64-bit.

A:System Health Report - Service exited with code not equal to 0 or 1077

Run SFC /SCANNOW Command to check system File integrity.

If it finds errors it can't repair, try running it again repeatedly until it is clean.

If it won't run try SFC /SCANNOW Run in Command Prompt at Boot.

Report back results and continue checking over your system with the Troubleshooting Steps for Windows 7

Read other 5 answers
RELEVANCY SCORE 57.2

The issue with by BSOD is I don't know what it is triggered by, it happens when gaming, sometimes when I watch streams and other times when I just use my PC to browse reddit and other sites.
DESKTOP-DGT5UST-Tue_02_09_2016_153420_22.zipDESKTOP-DGT5UST-Tue_02_09_2016_153420_22.zip

A:BSOD System Thread Exception help

Please tell me, how have you activated your installation?

Code:
<LicensingStatus>SL_LICENSING_STATUS_NOTIFICATION</LicensingStatus>
<LocalGenuineState>SL_GEN_STATE_INVALID_LICENSE</LocalGenuineState>

Read other 0 answers
RELEVANCY SCORE 57.2

I have the same problem as many that my windows 7 x64 system will bsod on wake from sleep about 1/5 of the time. I've attached the minidump

A:another BSOD on system wake thread

Hello and Welcome to SF !

We need the complete logs http://www.sevenforums.com/crashes-d...tructions.html

Based on the crash dump you attached it's pointing to Windows Kernel which may not be the problem. Lets start with basics

Found something it maybe the problem "DISK_HARDWARE_ERROR: There was error with disk hardware"

Run a Hardware Diagnostic !! ? Captain Debugger follow this thread

If your Overclocking please reset the BIOS values to default settings How to Reset Your BIOS - wikiHow

Run SFC /SCANNOW Command - System File Checker

Remove the following driver i.e.


Code:
MRESP50a64.SYS Sat Nov 19 13:44:28 2005 - NDIS Protocol kernel driver.
Can't find the manufacture of this driver i would recommend to deactivate it.
Go to C:\Windows\System32\Drivers MRESP50a64.SYS to MRESP50a64.old

Bugcheck:


Code:
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: 0000000000000020, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000009d, error status (normally i/o status code)
Arg3: fffffa8004e50078, current process (virt... Read more

Read other 1 answers
RELEVANCY SCORE 56.8

i have tried everything possible. Here is my log, i already deleted some programs, but i was wondering what else i should delete. Attatched is my log. Thank you!

A:"process has already exited"

Hello -

That is not a log, but a screenshot of the scanning interface.

Please do this to create a log:

double click on HijackThis.exe

1. If it gives you an intro screen, just choose 'Do a system scan and save a logfile'.
2. If you don't get the intro screen, just hit Scan and then click on Save log.
3. Post the hijackthis.log file here. Do not fix anything in HijackThis since they may be harmless.

Please do not attach the log, just post it in your reply.

Read other 17 answers
RELEVANCY SCORE 56.8

Hi,
My laptop keeps on crashing with this error "System Thread Exception Not Handled", and the last error I got was "Driver Power State Failure".  Every time it happens I recover my the computer to the previous restore
point. That is very annoying, I've got tired of restoring my computer, can anybody help me to fix it permanently?

I follow instructions posted in the forum to copy the  DMP files, below is the link:
https://onedrive.live.com/redir?resid=C912360C7971A154!216&authkey=!ACvqaxGcqhiLHLA&ithint=file%2czip
Thank you for your help! 
Ling

Read other answers
RELEVANCY SCORE 56.8

Hello all, i was getting BSOD for graphics card failure, TDR Failure, and Watchdog Failure. Now im not gettting that, but im getting system service thread exception. I ran the Scannow and here is what i got. I do not know where to go from here. I JUST WANNA PLAY DOTA 2!! ugh.

A:BSOD system service thread exception

Hi kbenton10 & Welcome to the forums ^_^,

Kindly follow the below instructions and upload the ZIP File with your next post -
Blue Screen of Death (BSOD) Posting Instructions
Also, see if your problem is resolved by following the below blog post of mine -
TDR Fix (For AMD & NVIDIA Users) - OMG Debugging!!!
Let me know how it goes ^_^
-Pranav

Read other 1 answers
RELEVANCY SCORE 56.8

I got a BSOD with system thread exception not handled netIO.sys

I used bluescreen viewer and it highlights the netIO.sys and the tcpip.sys and also ntoskrnl.exe on another dump.

I have viewed the dmp files in windbg but if I'm honest I don't know what I'm looking for.

I've zipped up the dmp files(only 2 files)if someone could have a look and find out what the issue is.

It would be greatley appreciated, many Thanks.
 

Read other answers
RELEVANCY SCORE 56.8

Hi,
My laptop keeps on crashing with this error "this System Thread Exception Not Handled", and the last error I got was "Driver Power State Failure".  Every time it happens I recover my the computer to the previous restore
point. That is very annoying, I've got tired of restoring my computer, can anybody help me to fix it permanently?

I follow instructions posted in the forum to copy the  DMP files, I tried to post the link here but I was not able to, I got this error after I pressed the Submit button:

        Body text cannot contain images or links until we are able to verify your account.
Anybody can help? I cannot even get passed posting the link here....
I appreciate  your help! 
Ling

Read other answers
RELEVANCY SCORE 56.8

Hi,
I keep getting the BSOD on my Windows 8.1 laptop with the message System Thread Exception Not Handled (atikmdag.sys). I've looked at other posts on this but I am not 100% sure if the problems I'm having are exactly the same as the previous ones posted. I'm therefore a bit reluctant to try any fixes on my own in case I just worsen or complicate the problem.

I have zipped the minidump files as instructed - on Onedrive - with the link: https://onedrive.live.com/redir?res...29&authkey=!ABBDAKQIh1bVkNw&ithint=folder,zip

I'd appreciate any help anyone can give me. Many thanks.
 

A:BSOD. System Thread Not Handled (atikmdag.sys)

Read other 9 answers
RELEVANCY SCORE 56.8

Some background info: I am running Windows 7 Ultimate. It is 64-bit. I am running it on a laptop.

I have no idea why I got the BSOD, but I did get it today. Restarted the computer in safe mode, then restarted again in "regular" mode and everything was fine. I'm typing on the same computer now (it's the only one I have, okay?). Can't think of anything that would be wrong with the computer, except the charger broke (I'm pretty sure this is a charger issue, and a new one is in the mail) so the battery doesn't charge: I have to have the computer plugged in when I use it.

Anyway, here's the text from the MEMORY.DMP file. Thanks for your help, guys! I'm a little afraid to even try anything myself, since I've heard messing with these files is a bad idea, so I came here for help first. I hope that's okay.

Microsoft ® Windows Debugger Version 6.12.0002.633 AMD64
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17944.amd64fre.win7sp1_gdr.120830-0333
Machine Name:
Kernel base = 0xfffff800`02a54000 PsLoadedModuleList = 0xfffff800`02c98670
Debug session ti... Read more

A:BSOD: System Thread Exception Not Handled?

- Download Who Crashed --> http://www.resplendence.com/download/whocrashedSetup.exe

- Install it and run

- Click on Analyze, after few seconds, you will get the message

- Right click, then Select All, right click, then Copy

- Save text in Notepad, and upload it here

Read other 4 answers
RELEVANCY SCORE 56.8

My computer crashed yesterday after I plugged in a USB drive. The BSOD error code was SYSTEM_THREAD_EXCEPTION_NOT_HANDLED and I get the same error everytime my computer turns on. I can boot into the recovery options but nothing works (safe mode, system restore, startup repair all broken). I have another HDD in the computer which I can boot from and access the old broken windows drive. I really don't want to have to wipe the drive.

Have looked at the dumps, but they seem to be from months ago. How do I get the dumps from this crash?

The error I get when trying to do a system restore is:

"System restore failed while restoring the registry from the restore point. An unspecified error occurred during system restore. (0x80070003)"

Thanks to anyone that can help.

A:BSOD system thread exception not handled

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

Do your still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

Read other 1 answers
RELEVANCY SCORE 56.8

i had this 
bsod system-thread-exception-not -handled
after scanning with norton power eraser and deleting(norton) a file from system mechanic pro,
so after rebooting for changes to take effect i had bsod.i know if i uninstall system mechanic from safe mode its gonna be fine,but i cant acess safe mode cause im having again there blue screen.also i tried system restore but it cant finish cause some windows files are corrupted,so i ran sfc/scannow and found corrupted files but couldnt repair them.
 
so im asking how can i fix bsod without system restore or accesing safe mode,and how can i fix my corrupted windows files so system restore can work.
fyi i cant also create a usb for system repair cause of corrupted files......
 
thats my minidump file.......
 
Dump File : 102714-17296-01.dmpCrash Time : 27/10/2014 9:53:43 μμBug Check String : SYSTEM_THREAD_EXCEPTION_NOT_HANDLEDBug Check Code : 0x1000007eParameter 1 : 0xc0000005Parameter 2 : 0x81fce7f8Parameter 3 : 0x829dc8f8Parameter 4 : 0x829dc4c0Caused By Driver : SMR430.SYSCaused By Address : SMR430.SYS+d7f8File Description : SMRProduct Name : SMRCompany : Symantec CorporationFile Version : 4.3.0.266Processor : 32-bitCrash Address : SMR430.SYS+d7f8Stack Address 1 : SMR430.SYS+bd0bStack Address 2 : SMR430.SYS+cfdfStack Address 3 : SMR430.SYS+1407Computer Name : Full Path : D:\Windows\Minidump\102714-17296-01.dmpProcessors Count : 2Major Version : 15Minor Version : 9600Dump File Size : 143.824Dum... Read more

A:bsod system-thread-exception-not -handled

Do the following, it should repair the corrupt files.
 
Click or tap on Search, then type cmd in the Search box.
 
cmd will appear under Apps, right click on it and in the options at the bottom of the page choose Run as administrator.  This will open the Elevated Command Prompt.
 
In the Elevated Command Prompt type in the following command followed by pressing the Enter key for each command.
 
DISM /Online /Cleanup-Image /RestoreHealth

Read other 15 answers
RELEVANCY SCORE 56.8

Recently I got this BSOD:

SYSTEM THREAD EXCEPTION NOT HANDLED

The first time, Its said about a file named "fltMgr.sys"; But after that, Everytime It only shows "SYSTEM THREAD EXCEPTION NOT HANDLED"

Windows can't loads up. I can access the windows only in safe mode.

Windows 10 Pro x64

The dump has been uploaded.

https://mirrorace.com/m/6k1k

Thank u.
 

Read other answers
RELEVANCY SCORE 56.8

Hi, since updating with the Windows 10 Anniversary Update, on Aug 3rd. I have had 8 BSOD occurrences Each giving the same
Stop Code: THREAD EXCEPTION NOT HANDLED also What failed? partmgr.sys.
Each time I had to power off and restart.
I looked up this driver in the Driver Reference Table which says this is;
Partition Management Driver - Windows Update

I ran your debug download which created the following file:DESKTOP-IV1DV6A-09_08_2016_181630_95.zip

Can you help me?
ps. (Did my attachment work?)

Read other answers
RELEVANCY SCORE 56.4

[solved]
Cannot import to registry.. "Not all data was successfully written to the registry. some keys are open by the system or other process, or you have insufficient privileges to perform this operation"

Read other answers