Over 1 million tech questions and answers.

Ploblems getting connection my with router.. Please help..

Q: Ploblems getting connection my with router.. Please help..

I have A Unex RP-NPRO-01.. I received it from a friend..

When I plug the ethernet into the WAN slot and back into my tower..

I get no connection..

Ive read a similar problem on here.. But the advice given did not help at all..

Please help.. Thanks..

RELEVANCY SCORE 200
Preferred Solution: Ploblems getting connection my with router.. Please help..

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Ploblems getting connection my with router.. Please help..

Thnx for the help (Y)

Read other 3 answers
RELEVANCY SCORE 50.8

redi sometimes loose my acess conections and have to reload the operating system again can you tell me why this happens
 

A:access ploblems

Hiya and welcome

When you say 'access', do you mean the internet or the actual program Access from Microsoft? If it is the internet, can you tell us which verion of Windows you're using?

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 50.4

I cannot use microsoft installer. No new updates will install.

I tried running msiexec /unregister but I get this error. I also get a similar error about 32/64 bit when I try to run .msi extensions.

"This version of C:\Windows\system32\msiexec.exe is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need a x86 (32-bit) or x64 (64-bit) version of the program"

I cannot install hijackthis to post the logs.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 965 Processor, AMD64 Family 16 Model 4 Stepping 3
Processor Count: 4
RAM: 6141 Mb
Graphics Card: ATI Radeon HD 2600 XT, 256 Mb
Hard Drives: C: Total - 152524 MB, Free - 16393 MB; F: Total - 1907599 MB, Free - 843578 MB;
Motherboard: Gigabyte Technology Co., Ltd., GA-880GM-UD2H
Antivirus: avast! Antivirus, Updated and Enabled
 

A:Microsoft installer ploblems

Read other 16 answers
RELEVANCY SCORE 50.4

Im on my laptop, but my desktop has some serious issues. Somehow the virus made it to where i cant use my internet browsers. Also windows firewall will detect the virus and it will show it as a high risk virus but it can not stop it. I did a HighJack scan and this are the results.

Thanks!

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:33:02 PM, on 12/7/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\WINDOWS\system32\inetsrv\inetinfo.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Maxtor\Sync\SyncServices.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\Program Files\Softex\OmniPass\Omniserv.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\system32\svchost.exe
C:\PROGRA~1\AVG\AVG8\avgemc.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\WINDOWS\system32\winlogon.exe
C:\Program Files\Softex\OmniPass\OPXPApp.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS... Read more

A:Ploblems with Torjan virus

Please visit this webpage for instructions for downloading and running ComboFix:

http://www.bleepingcomputer.com/comb...o-use-combofix

Post the log from ComboFix when you've accomplished that.

Read other 2 answers
RELEVANCY SCORE 49.6

Hello guys, can you tell me if it is normal this situation? When I connect the chager the display turn off for few seconds. It is the same situation when I disconnect the charger. Can you tell me if it is normal? I update the BIOS with the last version and I have the last version of the video card. Power plans are the same for both situations too.










Solved!
Go to Solution.

A:Lenovo L440 - Ploblems with chager

I response my question, here are steps to solve this:  knowledgebase

Read other 1 answers
RELEVANCY SCORE 44.4

Hi, I'm brand new here and I don't have tons of computer knowledge although I am learning....I hope! We bought a campground last year and were offering a wifi hot spot located near the camp office. It was actually done by accident because we live in the same building and have our own home network of 3 computers. We have a Linksys WRT54G router and a cable modem. So the campers were hopping on our wireless. I had some problems over the winter with someone using my credit card online. I was advised to maybe try getting another router and a hub/switch and basically to hook that hub/switch to the cable modem and then hook both routers to that and to have one of the routers be secured (WPA) and the other unsecured for the campers to use as a wifi hotspot. I also bought a Linksys range expander which I haven't set up yet. If this configuration with 2 routers on the same cable modem will work, I will set up the range expander to the unsecured router. I emailed linksys to ask them if this whole configuration was possible and the answer I received was basically not very straightforward but they made it sound like it couldn't be done. So now I'm asking you if it can be done the way I said or if there's another way I can offer an unsecured hot spot without compromising my own home network and security and without costing me a fortune. Hope someone can help. Thanks.
 

A:can i run a secured router and an unsecured router on the same internet connection?

Read other 7 answers
RELEVANCY SCORE 43.6

hey,

Today i have a new problem with my adsl. The wireless was working at full 'advertised' speed last night, then today i noticed the wireless connection symbol in the task bar had changed from 54mbs to only 2 mbs, and a speedtest showed that it was a tenth of the speed it used to be.

Because i just installed my modem yesterday, i thought maybe this was just the isp limiting my connection until i register the modem or something. However, when i connect an ethernet cable between the modem and my computer, the connection works at full advertised speed. Does this rule out the possibility that my isp is limiting my signal, and suggest that the problem is with my wireless settings? Thanks for any help. The modem is a speedtouch 780.
 

A:Solved: wireless connection to router slow, cable connection fast

Read other 6 answers
RELEVANCY SCORE 43.6

ok so i hav an adsl router modem. It has 1 ethernet output and 1 usb output.
I bought a wireless access point 2day and tried 2 connect it up so i can connect to the net on my laptop.

The adsl modem is connected to the desktop via USB. and then connected to the wireless access point via ethernet. However the access point does not seem 2 b picking up the adsl modem. The modem can be used with the ethernet and usb cable at the same time.. But the router has no internet connection. any1 know wat i need 2 set up or anything? thnx

adsl modem router - iConnect access 621
Wireless access point- TP-LINK TL WA601G
Diagram of wat im trying 2 do---


Desktop -----USB----- ADSL
modem/router ------ETHERNET-------Wireless
access point ------Laptop
 

A:Wireless router connection to ADSL router

You might need to check the settings of the ADSL modem, perhaps it has a Mac filtering option enabled which prevents another computer from connecting to it without first adding the Mac address in a list of authorized devices on the modem.

Also in the WiFi router's web interface, can you see the status of the Ethernet port ?
 

Read other 5 answers
RELEVANCY SCORE 43.6

Hi,

Hoping someone can help.

I have a Sony Vaio laptop running Windows XP with a wireless connection to a broadband router.

Several weeks ago my laptop started dropping the internet connection randomly (I'm alos unabel to access email when this happens).

My wireless network icon in my toolbar shows the connection as 'Excellent' but for some reason both Internet and Email is not available. The only way to fix the problem has been to restart my laptop which is very frustrating.

I've noticed that this also happens randomly when I'm at home (using different wireless broadband modem) so I think the issue is my laptop not the 2 x routers/modems.

I'm running NOD32 for security as well (but have been for 4 years now with no problems till now).

Please help.
 

A:Wireless connection to Router good but Internet connection drops

Read other 10 answers
RELEVANCY SCORE 43.6

The title explains it pretty much...

But I have a Belkin N router, in the room above I have a desktop with a Belkin N stick.

I also have a 100mbps connection

The Windows Network and sharing centre says I have a 150.00 Mbps connection, signal stregnth low, status connected.

Any reason why the signal is low?

My download speed is very slow all of the time.
Any advice appreciated thanks
 

A:Solved: Low internet connection - N router + N dongle + 100mbps connection?

Read other 16 answers
RELEVANCY SCORE 43.2

I just bought an HP Notebook 15-ba008ca and it keeps losing internet access while maintaining a connection to the router. I have several other devices that are not having problems so I know the router and modem are good. It must be the laptop. It has windows 10 and I don't know how to check the network adapter but the computer is brand new.

Read other answers
RELEVANCY SCORE 43.2

I just bought an HP Notebook 15-ba008ca and it keeps losing internet access while maintaining a connection to the router. I have several other devices that are not having problems so I know the router and modem are good. It must be the laptop. It has windows 10 and I don't know how to check the network adapter but the computer is brand new.

A:Internet connection dropping but connection to router intact

[email protected],
Thanks for using the HP Forums. One Stop for all sort of solutions for your HP Products

 

I have read your post and understand that you are unable to use wireless network as the PC doesn?t maintain the wireless connection. Is that, right?

 

I have researched the issue and have come up with a possible resolution.

 

I have found a link which ideally addresses the issue you have come across.

I request you to use the article from the link below and perform the steps and check if that resolves the issue.

 

http://hp.care/2fAo8Ki

 

This should solve the issue.  Let me know for more solution.

 

Resolv_S

 

Glad to help you. I work for HP

Please click ?Accept as Solution ? if you feel my post solved your issue, it will help others find the solution.
Click the ?Kudos Thumbs Up" to say ?Thanks? for helping!

 

"HP respects and is committed to protecting the personal information of our covered individuals." You can read more in the HP Privacy Statement.

Read other 1 answers
RELEVANCY SCORE 42.4

Ok here we go, I read the previous post of someone else having trouble with a Dlink 604 router and hope I can resolve this without having to purchase a new router as this one is only 2-3 months old and I can't afford a new one right now. I am running XP home with Qwest DSL service everything is cat5 cable connections.

Modem alone: connection via PPPOA for Dynamic IP, DNS is set to qwest IP's, DHCP server off and Windows TCP/IP Settings static, everything well and good.

QUESTION:When I connect my dlink DI604 router my settings are

Modem: RFCBridged, DMZ to Router for all port forwarding, DHCP off. Windows TCP/IP Settings static

Router settingsPPOE (has no selection for PPPOA) DNS is set to qwest IP's, DHCP off, Windows TCP/IP Settings static.

Both Connections work and DSLreports download/upload test comes out the same both connection methods, the problem is web page loading is slow with the router connected not quite dial-up slow but close. The test speed being the same leads me to think I have something setup wrong with DNS settings. Anybody have any ideas why this is happening or settings to try to speed it back up.

I have tried router DNS set to modem IP, DHCP on/off and anything else I can think of but still no change.

Please Help I can't just unplug it or my wife will have no Internet on her PC
 

A:Connection slowing after Dlink router connection

I'm somewhere between rather and totally confused by this, but will stick in my two cents worth anyhow.

With "Windows TCP/IP Settings static" I suspect that your best browsing results will be with DNS (on the computer) set to "qwest IP's." Maybe this is what you have already.

Your modem settings make me think that it's a modem/router combo. True? If so, when you use the modem without the Dlink, are you also using it "RFCBridged," or is that another difference between your two configurations?

And, finally, if it does turn out to be a defective Dlink router, are you not still within the warranty period?
 

Read other 2 answers
RELEVANCY SCORE 42.4

This crops up now and then in my clients machine repairs. Usually a complete reformat and reinstall sorts it. This time no joy. Windows XP on client's Dell Inspiron 6000 laptop.
Procedure was files and settings transfer before reformat. After reinstallation of Win XP restored files and settings. LAN connection to internet ok. Wireless connection to router ok. No Internet via wireless connection. Help!
Thanks in anticipation
Les

A:No internet connection yet wireless connection ok to router

If the net is seen by the wireless then its usually the Password and/or WEP/WAP.

Read other 2 answers
RELEVANCY SCORE 42

Im running an internet cafe and having problems right now coz i cant figure how to connect both Dlink DI-604 router together. Yes, I have 2 routers with both different internet connections but with the same provider and with this im running my internet cafe with 2 servers. Now, i just want it to run with one server but im having problems with the two routers coz i dont know how to set it up and i just cant discard my other internet connection if i just run it with one router. Because the greatest internet connection here in my province so far is only 1 mbps!!!

I appreciate any kind of help and suggestions... And sorry for my bad english... Thank you very much...
 

Read other answers
RELEVANCY SCORE 42

I have a wrt54gs linksys router that my ISP just set up for me. I have 2 wired computers connected to it, and one wireless one. Either only the wired or wireless computer(s) can work at once though. The power/internet lights seem to flash on it sometimes too. How can I fix this?

Also for now I would just like to connect my computer directly to the modem, but when I do so, and try to open Internet Explorer, it says detecting proxy settings and then says cannot find page. Is there any way I can do this myself without having to call my ISP? TIA
 

A:router/internet connection router

Hi,

Have you networked all the comps using the network connection wizard, and if you want to plug the modem straight to your comp switch the modem off for at least 30secs before doing so.

Regards, Ellgor.
 

Read other 3 answers
RELEVANCY SCORE 42

Hi,
I've been trying to extend my homes wireless network, without buying any new kit. At one end of the house is a Netgear router, but wifi only reaches half way. I've trailed a LAN cable to the other side of the house, and have been trying to connect up an old Belkin wireless router and use it as a switch.
I've followed these instructions : http://www.togaware.com/linux/survivor/Router_Router.html

THE PROBLEM:
My Netgear router ip is 192.168.0.1
My Belkin is 192.168.2.1

After resetting the Belkin, I can log on using 192.168.2.1, and change about half of the settings. I disable DHCP, change the WAN to stop it being used and try to change the LAN, but when I click save to go onto a different area on the router configuration, I get stuck with the message similar to "Your changes are being saved". No matter what I try after that, I cannot get onto the Belkin config menu without holding reset for 20seconds, and losing all the changes.

I've tried ipconfig on command, and I've tried to ping 192.168.2.1 but neither worked.

I've also tried changing the LAN settings first, but have the same problem.

What should I have plugged into what, when I'm changing router config. Netgear is all set up, with WAN in. I've not used the Belkin WAN, and only plugged it into the Netgear, and my laptop into the Belkin to change the settings.

I can find related threads, but nothing answers this specific problem.

Any help would be much appreciated!... Read more

A:Router-router connection blues

I have stopped it from turning off everytime I save a change, but I am still struggling to set it up. I've followed these instructions:

Connecting two SOHO broadband routers together.

Configure the IP address of the secondary router to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address.

Disable the DHCP server in the secondary router.

from john will on this forum, but I still can't get wifi from the second router to connect to the internet.

Any advice?
 

Read other 2 answers
RELEVANCY SCORE 42

Im running an internet cafe and having problems right now coz i cant figure how to connect both Dlink DI-604 router together. Yes, I have 2 routers with both different internet connections but with the same provider and with this im running my internet cafe with 2 servers. Now, i just want it to run with one server but im having problems with the two routers coz i dont know how to set it up and i just cant discard my other internet connection if i just run it with one router. Because the greatest internet connection here in my province so far is only 1 mbps!!!

I appreciate any kind of help and suggestions... And sorry for my bad english... Thank you very much...
 

A:Dlink DI-604 router to router connection help

Read other 12 answers
RELEVANCY SCORE 42

I have a non-wireless router and I want to attach my wireless router to add wireless (dsl modem -> router -> wireless router). Every time I try, shortly after I configure the wireless router, the main router loses it's settings and I have to cycle it. I am out of ideas and have no idea why this keeps failing.

The main router is a cisco/linksys rvs4000 vpn gigabit router. The wireless router is one of the older linksys wrt54g routers. The modem is in bridge mode. The main router is configured with static IP with ISP settings, DHCP enabled. The two routers are connected LAN-to-LAN. The wireless router is set to have a static IP on the WAN side (which is different that the first router), and the LAN IP is just outside of the main router's DHCP range. I've tried like this and with DHCP. DCHP is disabled.

Any suggestions would be appreciated!
 

A:Router to router connection fails

Read other 6 answers
RELEVANCY SCORE 40.8

Hello and good evening,

I literally just got my hp 2000-410US notebook pc laptop and I just connected it to my Belkin router. For some reason, my new laptop would not connect to the internet even though I am connected to the router. I have another laptop which is a hp G42-410us notebook pc but it connects perfectly. I already set up my settings for the new laptop but I am not sure if I missed something during the setup that allows me to use the internet. Does anyone know what could be the problem?
 

A:No Connection to Internet, but Connection to Router

Read other 7 answers
RELEVANCY SCORE 38.8

Guys I just want you to look at my setup in my net cafe as of now if there will be some problems that may occur and I also have a question regarding this setup.

ISP's are from same provider using a Motorola Canopy.
Routers are connected for gamers to play LAN games.
Router 1 has an IP of 192.168.0.1
Router 2 has an IP of 192.168.0.2
Default Gateway of Client PC's and Server 1 connected in Router 1 were configured manually to 192.168.0.1
Default Gateway of Client PC's and Server 2 connected in Router 2 were configured manually to 192.168.0.2

My question is.
Will both of my Internet Connections work together?
or One Connection will automatically shut down and all of the PC's will hook their internet connections to the other one?

Any answers or suggestions to make my setup better will be appreciated...

Thank you very much.
 

Read other answers
RELEVANCY SCORE 38.4

I have a DSL connection and running two computers via a router. On the main computer my connections speed is 100 Mbps but on the other on I only connect at 10Mbps. How can I speed up the connection on the other computer? I use a Linksys Router.
 

A:DSL connection router

Try this.

Control Panel > Network Connections > right click Local Area Network > Properties > Configure > Advance > Link Speed/Duplex Mode change the Value: to 100Mbps/Full Duplex if it is listed and see what happens.

Note: Your Ethernet adapter may not support that speed.
 

Read other 2 answers
RELEVANCY SCORE 38.4

Hi all looking for some guidance. I have a PC connected direct to cable modem and another PC using wireless through a router, I never set this up so dont have a clue. Anyhow I got an updated router from virgin and the instructions are basically plug in and go, well I did this and it knocked out my (direct) pc like I didnt have an internet connection.
Do I have to load the DVD for the wireless router to my direct connect PC? or just the wireless one.
I also at one point got a message on the direct one about putting a password in (8 digits) I did that and it kept saying it must be an 8 digit even though it was.
Is there anything else I should be doing. I realize the problem is likely to be me so any help appreciated.
thanks
 

A:Help with router connection please

Read other 9 answers
RELEVANCY SCORE 38.4

Hi,

I have a similar problem, I would appreciate any advice you have!

Here are the details:

Router: ZyXel P660 HW-T1 v3
Windows 7 Home Premium
Wired connection is the problem
(wireless is fine, I'm connected to it right now)

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Adam_Desktop>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Adam_Desktop-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82578DC Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 90-FB-A6-30-61-A1
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.35(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 13 July 2010 18:00:52
Lease Expires . . . . . . . . . . : 16 July 2010 18:00:52
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 203.144.207.29
203.144.207.49
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{F7A55AAB-2F58-4562-ACE5-E6E8CB0C14CB}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description .... Read more

A:No connection through router

Read other 9 answers
RELEVANCY SCORE 38.4

Here's my problem, I have 2 pc's connected to the internet through a router. I want to be able to have a LAN connection (with file sharing and all the rest of it) with them.

We both have Win XP SP2 and Zonealarms firewall (which we have put each other's IP in as a Trusted IP), we have also run the new network wizards more time that I can remember. We have also set some of our folders to sharing and also turned off the windows firewall but with no sucess.

To give an example, I wanted to play a mutliplayer game with the guy on the the second pc using the 'Play LAN Game' rather than connecting to the internet.

Any help would be great.
 

A:LAN Connection through a Router

This site here takes you through setting up a home network.
http://www.homenethelp.com/web/howto/net-update.asp
 

Read other 1 answers
RELEVANCY SCORE 38.4

Not sure if I am in the right forum, and if not, please accept my appology. I have just reformatted my one computer that is running windows 98, it has been on my home networking before and no problem. This is not the main machine where it is hooked up to, but one that it runs off of. I for some reason, can't get the internet going on it. I use cable, and have modem with four port router. All is working except this one computer that I just reformatted. Usually, it just comes up normally, but this time cannot locate that it is on the internet. Is there anyone there that can tell me how to fix this problem. I forgot how to ping it to see if the connection is going through. Please help if you can. Hopefully, I gave enough info to do so, if not please let me know what else I need to do this. Thanks ahead of time for any help, anyone has.
 

A:Router Connection

Read other 13 answers
RELEVANCY SCORE 38.4

ive just installed vista ultimate (full version) and the network adapter says theres 'limited connectivity'. Xp allowed me to deselect this notification but what happens with this is that i cannot connect to the net unless i uninstall and reinstall the ethernet driver for the asrock skt 939 dual vsta board. Any tips to overcome this and allow a consistent connection to the net ?
 

A:Router connection

Read other 12 answers
RELEVANCY SCORE 38.4

I have Verizon internet ( DSL )...and my own personal router...generic from Compusa. XP SP3 pc and the Verizon 6100F modem. I had setup my router according to its instructions and still cannot see my router, though all the lights are on. naturally, my laptop does not make the wireless connection that I need for my upcoming trip. Could someone clue me on what is the problem? Thanks
 

A:Need Router connection

Read other 16 answers
RELEVANCY SCORE 38.4

I would like to purchase a router for my dsl connection,but my modem is a usb. All the routers I saw have ethernet connections.
 

A:router with usb connection

Read other 9 answers
RELEVANCY SCORE 38.4

Hi there,
It's been awhile. New problem. Hope you can help. I had a Netgear WNR2000. Had it connected to my desktop and worked fine. Had internet access on desktop, laptop, daughters desktop and phone. Her friend came over with his laptop and tried getting internet. Would not work, kept asking for a number off the back of my router. They got the needed number and he had access, but noone else did. Then my router signal became his router. Then I put in a number and I got internet, but my daughters desktop and phone could not. Called internet company, they come out say its my router and I should buy another one and it should all work again, but it dont. My new router is doing exactly the same thing as my old one. Same router as before. Don't know what else to do and I can't seem to get anyone out here to help me. Can you help me out? Thanks in advance.
 

A:No connection thru router

Read other 16 answers
RELEVANCY SCORE 38.4

I have a similar problem (don't have an additional router though); your problem marked as solved - what was the solution?

Thanks and regards,

Mike
 

A:No connection through router

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Note: You will need to post complete details of your configuration and your specific issue in this new thread for us to help you.

Thanks for your cooperation.
 

Read other 2 answers
RELEVANCY SCORE 38.4

Hi there. Every so often I cannot connect to my router, which is a Belkin
I can ping it all right, and I can go on the internet; but when I enter the ip address, there is an error message about no connection. What I have done in the past is to turn off the router and back on. Then bingo!
Any ideas why this happens and if there is a different way other than to restart the router?

A:router connection not possible

  
Quote: Originally Posted by gallicbear


Hi there. Every so often I cannot connect to my router, which is a Belkin
I can ping it all right, and I can go on the internet; but when I enter the ip address, there is an error message about no connection. What I have done in the past is to turn off the router and back on. Then bingo!
Any ideas why this happens and if there is a different way other than to restart the router?



Hi and welcome
what does the router think your IP is? have you tried going to the web page for it (usually 192.168.x.x)? is there encryption? firewall port blocked?

Ken J

Read other 4 answers
RELEVANCY SCORE 38.4

I have a Linksys WRT54G router, and my computer in the other room when it tries to connect stays on for a moment or so, and then loses connection.. if connect at all.

What seems to be the problem?

A:Connection Through Router

hello ,

you would bennifit better if you posted this in the network section of this site


Mike

Read other 1 answers
RELEVANCY SCORE 38.4

Need to connect to the network at my workplace as if I were there. It is a workgroup and not a client server domain. I want to use XP Pro to log into the LAN through a Linksys BEFVP41. In the back of the manual to my Linksys router there are instructions for setting up secpol.msc. But isnít that only if I have a real server like Microsoft Server 2003 inside the LAN? From what I have gathered from reading stuff at Microsoft.com that seems to be the case. At first I thought that the router would connect me to the LAN w/o needing an internal server. But I am wrong to think that arenít I? My DSL router has a bimap rule to direct traffic to my VPN router.

So if I need a VPN server then why even create the tunnel with the VPN router? Isnít that for a router to router connection? The router allows IPSec and PPTP pass-through. So I tried both ways. I tried enabling the tunnel as well as disabling the tunnel and setting up an XP Pro machine inside the LAN as a VPN server by using the Network Connections features that Pro offers. (Reference: Microsoft Press: ďWindows XP Networking Inside outĒ) I followed the instructions in this manual to set up the server and create the connection to the server. I had the router forward requests on port 500 to the PC running the VPN server connection. It didnít work. It looks like this feature is only for dial-up into the VPN server. Is that correct? I did read that the VPN operates on top of the connection. I'm supposed to be able to dia... Read more

Read other answers
RELEVANCY SCORE 38.4

Have a Linksys wrt54G2 router. It is listed in my desktop computer under printers and other devices, but when I try to get connectivity, it fails to connect. All the lights on the router are green and blinking except the middle LED light. How do I get connectivity, or do you think there's something wrong with the router? Thanx in advance.
 

A:router connection

According to this manual you have network activity on all 4 ethernet ports and on the wireless and on the internet port and the router is still going "through its self diagnostic mode during every boot-up."

I'd call that defective. Try to reset it to factory default settings.
 

Read other 1 answers
RELEVANCY SCORE 38.4

Hello. I have an Acer Aspire one netbook (so no CD drive) I'm currently stationed in Korea. My landlord has a line running in from outside for my internet, I bought a wireless router, plugged the line into the router, inputted the necessary information on screen. I have full signal but no connectivity. Please advise. thanks
 

A:New router with no connection

Read other 12 answers
RELEVANCY SCORE 38.4

Hi, my main pc has winxp OS and I have just installed a new Lynksys router WRT16ONL and have succeeded in connecting to the internet BUT I am not able to connect my wi-fi devices which are a second pc running ubuntu 12.04 with an attached netgear dongle WG111 v 2 (I have other devices such as ipad and smart phone which I know will work once the 2nd pc connects) In addition the netgear password is five characters long and I could not find any place to enter this code in the Lynksys setup which uses nothing less than eight characters. Hope someone can help me out of my frustration
 

A:new router wi-fi connection

I was never able to get a Netgear wireless adapter working with Ubuntu, but it was with older versions of Ubuntu and slightly different adapters.

I assume that you are using WPA or WPA2 on the router. If so, does the adapter/driver support that encryption type? I'm 99% confident that it does not support WPA2, and may not work with WPA/WPA2 mixed.

Try first to connect with encryption disabled.
 

Read other 1 answers
RELEVANCY SCORE 38.4

I'm running Windows XP and i'm using a Airlink101 AR504 router that is connected to my Comcast modem using the WAN port, and the laptop is connected to port 1. I try to connect to the Internet but there was no connection. Could there be something that I need to configure in my network connection. I'm using a dhcp service from Comcast and a static DNS address, could this be the problem.
 

A:no router connection

We don't yet know enough information to identify the cause of your problem. But I can tell you what I consider the two most common causes ...

a. If the modem is only a modem you need to power cycle (unplug for 30 seconds) it when switching from the computer to the router.

b. If the modem is actually a modem/router combo it may be using the same LAN IP address range as the Airlink101, and that almost never works without changing one of them.

What is the brand and model of your modem?
 

Read other 1 answers
RELEVANCY SCORE 38.4

I have an ASUS RT-N56U router. I see that it has a USB connection. If I plug in an external Hard Drive will be able to access it from all the computers in my home.

Forgive my ignorance but Networking is not my best subject and I am nearly 70.
 

A:Router usb connection

Read other 9 answers
RELEVANCY SCORE 38.4

I am looking for a router that will accept a 3g cellular wireless USB card. Esentally, the router needs to pick it up as the internet connection. I have see that linksys has a product but, I was wondering if there are any other companies that sell something similar.
 

A:3g router for usb connection

Read other 9 answers
RELEVANCY SCORE 38.4

I suddenly cannot connect to the Ďnet. Problem seems to be with the router (Netgear DG834G), which I cannot access to diagnose. Iíve tried manually rebooting and turning it on and off again. Windows assures me there is a connection and I can see the browser is receiving and sending data (though at a miserly rate). Tried IE and Firefox but both come up with similar messages about the connection timing out. Email isnít accessible. Do I need a new router?
 

A:no connection to router

Read other 16 answers
RELEVANCY SCORE 38.4

Oki i have two rather small yet highly annoying problems.

1) Whether i'm using IE or FF some sites/pages will not load correctly - even though ive visited the sites on other computers (ie at work) and not had any problems. For example:

www.unitedhosting.co.uk - all that loads it the logo, the flash animation, the 'Established since...' text and some of the footer area. The progress bar very gradually goes up and after a few minutes all other images appear as the 'could not load/find' red cross. Interetstingly enough i also tried www.unitedforums.co.uk (run by the same people) and this site just wont load at all.

2) The site http://info.vilesilencer.com/ contains a link to download an xls excel file containing a list of SEO friendly directories. When i click on either quick link (white) link it simply opens a new window with the URL http://info.vilesilencer.com/seo-friendly-list.xls but doesnt not start the download of the xls file. If i try using the alternative link below it (in red with dotted underline) it simply tries to load the same page but nothing happens and the page does not change and the xls file does not start downloading.

Needless to say these are two very annoying little problems which only seem to be happening to me on my computer.

I have done a full virus scan using AVG with the latest defintions, have cleared my cache and history, run chkdsk, have tried changing the ActiveX settings, have tried without Google Toolbar running, do... Read more

A:Is it XP, my connection or my router?

Read other 16 answers
RELEVANCY SCORE 38

Recently I purchased a new wireless N router, and have moved the older wireless G router downstairs, where I hope to be able bridge a connection between the two. Google results, ironically enough, have suggested Googling instructions on setting such a thing up.

Connected to this computer (which is upstairs) is the new one, a Belkin Wireless N model no. F5D8236-4 Version 1. Downstairs the the old Linksys Wireless G model no. WRT54GS Version 6. I have a friend who works a lot with networking, who is skeptical of the idea, but Googling it has returned hope that it is possible. The main dispute is how.

Here's the setup: This computer is wired to the Belkin router, which is wired into the modem and is also currently hosting the house's wireless network. The Linksys is downstairs wired only to my Xbox 360. My attempts at even trying to find where to configure these routers have proved pathetic, so I've been driven here.

Could this work, and will it work with these two routers? If so, how do I go about it?
 

A:Solved: Wireless Router to Wireless Router Connection?

Read other 11 answers
RELEVANCY SCORE 37.6

Hi all,

Sorry if this all sounds a bit vauge - im a beginner here so please cut me some slack if i go wrong!

My PC is connected via USB to a BT Voyager 220V ADSL Router. My laptop is connected using an Ethernet cabke to the same hub. At random intervals of time my PC drops its connection to the web, whilst at the same time the laptop does not.

So the obvious thing is there is something wrong with the USB... well ive tried different USB slots, still the same. Ive tried USB on the laptop and it cuts out the laptop (cant try ethernet on the pc as it doesnt have a card), I've replaced the USB cable - so that leads me to think it might be the PC software. Am running windows xp, sp2.

anyone got anyyyyyyyyyy ideas at all? help muchly appreciated -its driving me potty.

ta
 

A:BT Router on USB - connection probs

oops forgot to add - if i power off and on the router the pc connection restores, but do this more than a couple of times and it doesnt and the only way to get it back is full reboot of the pc.

hope that helps you, help me.

ta.
 

Read other 1 answers
RELEVANCY SCORE 37.6

I wanted to see if a direct connection to the internet would somehow boost my upload (considering my router is in the way usually). I'm having trouble uploading, so anyways, I plug the wire from the pc into the modem directly. I wait, it shows the hourglass on the screen for a couple of seconds, then the internet doesn't work. I try restarting, and then doing ipconfig. It still says "Disconnected". What is going on here? Do I have a faulty wire, or something?

My router is a DLink DI704P if that helps (could it have done something to the pc?).
 

A:Net connection works with router, but not without?!

whoa, what kind of modem and internet connection type does it employ? what addressing scheme (static or dynamic)?
 

Read other 7 answers
RELEVANCY SCORE 37.6

I have a D-Link DI-604 broadband router with two computers (one running Win XP Home, the other Win 98 se) connected to DSL through it. It loses the internet connection periodically, usually after an hour or two, but sometimes longer. To restore the connection I reboot the computer and reset the router. Is there something I can do to remedy this, or do I just have to live with it?
 

A:Router keeps losing connection

Read other 16 answers