Over 1 million tech questions and answers.

Lenovo G460 - BIOS update failed - wont boot

Q: Lenovo G460 - BIOS update failed - wont boot

Hi, My G460 wont boot after i tried to update BIOS. There was an error message during the BIOS update and bad that i failed to note down the error code. After reboot, the system is not starting. The RAM light is not blinking. System starts with 3 led and then shuts itself. No display and I am not able to enter BIOS setup too.

RELEVANCY SCORE 200
Preferred Solution: Lenovo G460 - BIOS update failed - wont boot

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Lenovo G460 - BIOS update failed - wont boot

Default BIOS settingsGo to BIOS and press F9 save and exitUnit should boot to the OS




Did someone help you today? Press the star on the left to thank them with a Kudo! I dont know what Kudo does but anyway xDThere is nothing like 192.168.1.1

Read other 1 answers
RELEVANCY SCORE 100

Good evening.I have a Lenovo G460 20041 its cooler turns 100% on any task up to idle.Reading some texts on the internet some people recommend to upgrade to Bios and give unofficial source links do not like to use this type of linkWould you like to know why Lenovo does not provide update for Bios of this notebook?Update to Bios is solution for the cooler to turn 100% full time up in IdleCould someone give me a tip of what to doThanks for listening.   Bios update is not required for this product - Notebook, Desktop http://pcsupport.lenovo.com/br/pt/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g460e...

Read other answers
RELEVANCY SCORE 88

Hi,

I tried to do a BIOS update on my DX1210 last night to version 1.5,
During the update there was a write failed error message and now the system won't boot.
Is there a way to reflash the bios when a bios update fails?
I've got all the bios files extracted on to a USB key but I'm not sure what to do to initate a bios recovery?

A:Qosmio DX1210 wont boot - Bios update failed

Well, BIOS problems can be solved only by an Toshiba authorized service partner.
I assume the ROM module where the BIOS is stored, has not been flashed properly.
The Rom module can be flashed again using an special crisis disk.

Therefore I see just one real option for you: get in contact with the service guy to get it fixed.

Read other 1 answers
RELEVANCY SCORE 77.2

Hello,I have a Lenovo Thinkpad W540 which is out of warranty.  While using the Lenovo System Update utility to update the BIOS, the BIOS update failed, and now my W540 will no longer boot.  Is there a way to restore the BIOS without replacing the system board? Is there a place where can I download the BIOS file (not only the upgrade utility)? Thank you!

Read other answers
RELEVANCY SCORE 75.6

Hi everyone. I have a problem with my t430s, after updating the bios using lenovo online tool, my pc won't start anymore.  It powers, after a few seconds the wifi indicator led turn on, and stays like that. No beeps, nothing. Tried removing bios battery, the 10 press plus long press of power button, but no luck. Does anyone know a way to revive it? I don't have warranty on it. Thanks.

A:Lenovo T430s BIOS Update failed

Problem solved. I found some 1333 ram today and insert into my laptop. The old 1066 tams are not supported in this bios appears...  

Read other 1 answers
RELEVANCY SCORE 75.6

Hello everyone!I tried to install a BIOS update in my notebook, (yes I checked for the compatibility, it is compatible to mine: 710S Plus - 13IKB) but after the reboot from the installation the notebook got stuck in Automatic Repairs being prepared black screen and it just wouldnt change, after an hour or two I concluded that it was in a loophole and restarted it, now it only shows the lenovo logo and a windows blue screen shows up with the error: inaccessible boot device, I also cant enter my BIOS settings, it simply ignores the keys that I'm pressing. please help!!!

Read other answers
RELEVANCY SCORE 75.6

Hello everyone!I tried to install a BIOS update in my notebook, (yes I checked for the compatibility, it is compatible to mine: 710S Plus - 13IKB) but after the reboot from the installation the notebook got stuck in Automatic Repairs being prepared black screen and it just wouldnt change, after an hour or two I concluded that it was in a loophole and restarted it, now it only shows the lenovo logo and a windows blue screen shows up with the error: inaccessible boot device, I also cant enter my BIOS settings, it simply ignores the keys that I'm pressing. please help!!!

Read other answers
RELEVANCY SCORE 74.8

Hello, I recently bought a Lenovo z50-75. A few hours ago I wanted to update my bios. It was updating and suddenly the laptop restarted and there was just a black screen. I could hear the fans running, but the keyboard doesnt work because if I press Caps Lock the light won't turn on. I searched on google and there I found some solutions (with pressing keys, removing battery, etc.), but none seemed to work.I also found something about the CMOS battery. I opened my laptop but I couldn't seem to find it. What can I do now?  Best regards, Max

A:Lenovo Z50-75 bios update failed > black screen

Welcome to the Lenovo Community Max !
 
From viewing your model's Hardware Maintenance Manual there is a motherboard CMOS battery.  Unfortunately from the illustrations in the manual it would appear that the CMOS battery on the Z50-70 is soldered directly to the motherboard and can not be easily removed.  In that case try removing the main battery pack again and then press the power button for 60 seconds or longer.  Hopefully the CMOS battery will not be able to keep up with the power drain and will clear the CMOS.  Then reinstall the main battery pack and try powering it up. 
 
For your reference, here is a link to the Hardware Maintenance Manual......
 
https://download.lenovo.com/consumer/mobiles_pub/lenovo_g_z_50_series_hmm.pdf
 
If that doesn't resolve the problem then I recommend you contact Lenovo Support for additional warranty service.
 
Lenovo Support  -  Netherlands
 

Dutch 0900-654-654-0 or Email: (? 1 per gesprek)
9:00 - 18:00 Monday - Friday

Read other 2 answers
RELEVANCY SCORE 74.8

Hello,I have a Lenovo Thinkpad W540 which is out of warranty.  While using the Lenovo System Update utility to update the BIOS, the BIOS update failed, and now my W540 will no longer boot.  Is there a way to restore the BIOS without replacing the system board? Is there a place where can I download the BIOS file (not only the upgrade utility)? Thank you!

Read other answers
RELEVANCY SCORE 74.8

bios update a2cn45ww lenovo g40-45 failed to install. after restarting, insydeh20 firmware update failed. os win 10 64bit uefi. thanks a lot

Read other answers
RELEVANCY SCORE 74.8

I purchased this used X250 (Product Number 20CMOOE5US) last week with Windows 10 Enterprise 64-bit Edition. I downloaded and installed Lenovo Vantage from Microsoft Store which is built-in in the Windows 10. The Lenovo System Update utility updated several components but failed with a BIOS update. The current BIOS version listed at the bottom of the Lenovo Vantage window is N10ET21W 0.21. I tried the stand-alone BIOS update version 1.27 downloaded from https://support.lenovo.com/us/en/downloads/ds102288, which also failed in the same way: the error message reads "OEM check failed from BIOS service. The utility process has not completed." I also noticed this weired label in the System Information for the processor: Intel(R) Core(TM) i7-5### CPU @ 2.2GHz 2.19GHz. I guess a BIOS update would correct the processor info. But then how do I get BIOS updated? Please advise.

A:X250 BIOS update failed - Lenovo Vantage

Here is the text shown in the terminal window while Lenovo Vantage's System Update was installing BIOS update: SCT Flash Utility for Lenovofor Windows V1.0.3.9Copyright (c) 2011-2017 Phoenix Technologies Ltd.Copyright (c) 2011-2017 Lenovo Group Limited.SecureFlash BIOS detected.Read BIOS image from file.Initialize Flash module.Read current BIOS. This terminal window flashed 3-4 times and then disappeared with the "OEM" error message described in the original post.  

Read other 1 answers
RELEVANCY SCORE 74.8

Hi.  I have got a Lenovo z50-75 notebook. I made a bios update yesterday, but it failed and when turn on the screen black. How I solve This problem? Solutions? Thanks for everybody. 

A:Lenovo z50-75 bios update failed, black screen

If you need to update your android mobile please check you internet speed, storage and update mb. Because if you internet speed is low your update will be failed.

Read other 1 answers
RELEVANCY SCORE 74.8

Hi all, I bought yesterday an Lenovo ideapad 320S14IKB.(80x4) Lenovo vantage shows me a bios update V.4QCN43WW but when i try to install it says it failed. my current bios version is 4QCN36WWV1.06.I just have it for one day and yesterday i got so called `blue screen` error so i checked the updates thinking it might help but can not get it to install successfully, any help will be appreciated thanks

Read other answers
RELEVANCY SCORE 74.8

Good MorningI have Lenovo z50-70 with Windows 10 64bit lastest version, with BIOS version 9BCN25WWI would to update BIOS at last version 9BCN91WWAll ways i tried finish with Error: Update BIOS Failed! the bios window update writes: InsydeH2O BIOS Flash Utility version 1.00.16.00Loading New BIOS Image File: DoneLoading EC Image File: DoneCurrent BIOS Model Name: ACLUABNew BIOS Model Name: ACLUABCurrent System BIOS Version: 9BCN25WWNew BIOS Image Version: 9BCN91WW Error: Update BIOS Failed! I tried with Lenovo Companion, i tried to download from support website last BIOS Update for Windows 7 (32-bit, 64-bit), Windows 8 (64-bit) , Windows 8.1 (64-bit), Windows10 (64-bit) - Lenovo Z40-70, Z50-70 bios I have BitLocker activated, so i tried to suspend and re-update but nothing to do. Any ideas? Many Thanks  

Read other answers
RELEVANCY SCORE 74.4

Hello

My last BIOS update has failed and now my laptop Satellite PrU400 PSU45E is out of order.
I want to use the Crisis Recovery Disk with an USB floppy drive but I don't know the key combination to run the boot-block.
Is anybody can help me?

Best regards

A:Satellite Pro U400 BIOS update failed - What is BIOS Boot-block access

Hi

I wondering what Crisis Recovery Disk do you have ?:|
In my experience the special disk is needed which is available only for ASP technician.
Therefore it?s necessary to contact the ASP in your country in order to reflash the BIOS.

In my opinion you shouldn?t not try any ?Crisis Recovery disks? which you fond in the net? this can lead to mobo damage?

Read other 5 answers
RELEVANCY SCORE 74

Hi all,
 
I bought yesterday an Lenovo ideapad 320S 14IKB.(80x4) Lenovo vantage shows me a bios update V.4QCN43WW but when i try to install it says it failed. my current bios version is 4QCN36WWV1.06.
I just have it for one day and yesterday i got so called `blue screen` error so i checked the updates thinking it might help but can not get it to install successfully, any help will be appreciated
 
thanks
 
Moderator note: post moved to appropriate forum.  Model number edited for readability.

Read other answers
RELEVANCY SCORE 74

https://support.lenovo.com/downloads/ds105641Tried to update BIOS with that tool on the linkall the windows stuff worked, but when the machine rebooted, it hanged up on a black screen, left it overnight and still no go PC powers on but throws no image neither on HDMI no VGAAs for the speakers, not a beep, not a chime, nada, zeroTried clearing CMOS by unplugging machine, removing CMOS battery, fiddling with the 3-pin CMOS jumper, stripping off RAM, holding power button over 30 seconds, pressing power button over 30 times; nothing seems to wake up this sleeping beauty For some reason, USB ports now feed enegy even when the machine is shut down any way to flash BIOS to this seemengly BIOSless machine?

Read other answers
RELEVANCY SCORE 73.2

Flash from SO Windows 7 prowhen it arrives at:"loading capsules to secure memory buffer".......It locks them (77% charge) and does not go further.I have to turn off the power to start it up again.Any suggestions?Thanks so muchpiercpu intel G32208gb ram ddr3hd 500 Gb

Read other answers
RELEVANCY SCORE 72.4

Hello guys, I have a big problem. Yesterday, my notebook started a bios update while starting. Unfortunately, the PC shutdown during the update process and now, everytime I start the pc, there is only a black screen and the fan spins heavy. Has anybody an idea how I can recover the CMOS/Bios? Taking out the CMOS-Battery and the Accu didn't work.  Thanks for your help, Olli

Read other answers
RELEVANCY SCORE 71.6

Hello, I tryed to update the BIOS on the machine, it seamed to have worked fine I followed all the instructions and It said the insallatiin was succesful, after a rebot I got the following message:EFI Network 0 for ipv4 (...) boot failedThan this one:EFI Network 0 for ipv6 (...) boit failed Default boot device missing or boot failedInsert recovary media and hit any keyI dont have a recovary mediaThen it displayes the boot manager window with onley the abuve network options. Origenally the machine came with windos 8.1 witch had some problems with wireless networks and other things, it was more hastle then its worth so I downgraded to windos 7 ultimate wich worked well so far. Today I decided to update the laptop, downloaded all the drivers from lenovos support site and started with the BIOS update which got me here. Any ideas how to solve this? Ps. I'm unable to access the BIOS menue, I've tryied these combanations:F1, F2, shift+F2, F8, F11, F12, insert and delete.Non of them worked.  

Read other answers
RELEVANCY SCORE 71.6

Hi there
I have a hp pavilion a6400f desktop with windows 7 ultimate 32 bit on it. Recently I downloaded bios update from hp site that was for windows vista 32 bit and ran it on this pc in windows 7. It went well then asked for reboot and after that windows startup screen appears saying "Starting Windows" then pc restartd autonatically and goes into system restore state of windows. I tried resetting bios default settings and cleared cmos used startup repair and used system restore to restore my windows to a previous state but nothibg works and the problem still shows up the same way.
 

Read other answers
RELEVANCY SCORE 70.8

The problem was that after the BIOS update it reverted the setting to boot from UEFI and changed the behavieur of the function keys. Solution: 1- follow these instructions to acces the BIOS setting: www.support.lenovo.com/us/en/solutions/HT104063?linktrack.solr (Care for the function key) 2- in the boot menue, change the boot mode to Legacy support. 3- save changes and exit. 4- windows 7 shuld boot normally. Ps: If you plan on installing windos 8 or higher, make shore to change the boot mod to UEFI. And don't be a block head like me and make sure your recovary media is set and ready to go when needed.It would have saved me alot of time and effort. Hello, I tryed to update the BIOS on the machine, it seamed to have worked fine I followed all the instructions and It said the insallatiin was succesful, after a rebot I got the following message:EFI Network 0 for ipv4 (...) boot failedThan this one:EFI Network 0 for ipv6 (...) boit failed Default boot device missing or boot failedInsert recovary media and hit any keyI dont have a recovary mediaThen it displayes the boot manager window with onley the abuve network options. Origenally the machine came with windos 8.1 witch had some problems with wireless networks and other things, it was more hastle then its worth so I downgraded to windos 7 ultimate wich worked well so far. Today I decided to update the laptop, downloaded all the drivers from lenovos support site and start... Read more

Read other answers
RELEVANCY SCORE 70.8

Hi. I have a lenovo y50 running windows 10. It did some automatic update, shut down and when I powered it up again, I got the update being prepared screen then after a while it rebooted and was stuck on the lenovo logo for a long time. I force shut it down and again it froze on the lenovo screen. After powering  it up again, i got a bsod and it again rebooted. Now,  when i power it on i dont get anything on the screen, its totally blank with the leds powering up and also the keyboard backlighting. Any help guys? 

A:Lenovo y50 wont boot. Can't access bios, blank scr...

Hi nikar15 , 
 
Welcome to the Community Forums. 
 
Would you have the machine number? Check on the machine number from the sticker or check it from here ,just keep your serial number confidential.
Was it previously on Win8.1 ? Did you manage to create a recovery media ?
 
It would have to power drain the machine by removing the charger , battery and harddrive and to press and hold down the power for 12 seconds. 
 
Without the harddrive and battery , try going to the BIOS by FN + F2 or use the Novo button to start. If you manage to get the BIOS set up screen , go to the Exit Tab and load optimal defaults and save and exit. Turn off and put back the battery and harddrive and check.
 
Update us how things go. 
 
Regards

Read other 1 answers
RELEVANCY SCORE 70

HiI updated my Bios on my Aspire T-180 but it failed. At the end of the update, the Winflash utility reported that it failed. Now, the PC stop at "Verifying DMI Pool Data".I tried to clrear de CMOS data after removing the RTC Battery.I dosconnected everything to make sure it's not a device. I even added a Floppy drive to try to boot from anything after trying a USB bootable disk but the BIOS always stop on "Verifying DMI Pool Data". I would really appreciate to know if there is a solution or if I'm spending my time on my wife's PC.Thanks

Read other answers
RELEVANCY SCORE 69.2

Hi everyone. Please help out here. I have an HP Pavilion G6-1d40ca. It crashed the other day while I was using it, and when I restarted it, it went to BIOS update. It froze while updating, and died in itself (I think the battery died, it wasn't plugged in. I never knew about BIOS update, so I wasn't expecting for the battery to die during the update, so I didn't plug it in.) Second time, booted it up (it was plugged in this time), and went into BIOS update once again. All's good, was able to use the laptop for about five minutes, then it crashed once again. Now, when I boot it up, nothing comes up on the screen. No nothing. The power button is on, the wi-fi is on, the LED light is blinking non-stop, more than 6 times than what is referred to the HP website.

I tried doing the remove battery and adapter, press power button for 30 seconds, plug it in without the battery, but to no avail. I also did the whole win+B, but doesn't work either. I tried pressing f11, but nothing comes up on the screen. I don't remember where I put the recovery discs that came with the laptop. I thought I put it on the box together with recovery discs for our other computers at home, but I guess I didn't. The thing is, I don't know where to begin, since I don't have anything on the screen itself. Not even a start-up logo or something.

I only had this laptop for about 3 months, and looking at the other threads, it might be a hard drive failure problem. I could return it to HP, but was just wonderi... Read more

A:Failed BIOS update,HP pavilionG6 won't boot up and only black screen

Did you run a BIOS update, because it wouldn't restart into one. What exactly did the screen say that made you think it was a BIOS update being done without running it yourself (unheard of).

What LED light is blinking nonstop?

Can you boot into HP Factory Recovery: HP Recover Windows 7 Operating System Using HP Recovery - HP Customer Care (United States - English)

You can try these steps for Troubleshooting Windows 7 Failure to Boot which will tell you if you can boot a disk to do repairs. If so besides links to the Win7 installer to use for repairs, there are also links to HD and RAM bootable CD tests to check your hardware.

But if this cannot get traction quickly what I would do with such a new rig is call HP Tech Support and have them walk you through steps to determine if it should be returned or if there is a known issue.

Read other 4 answers
RELEVANCY SCORE 69.2

My Lenovo Z410 came with v37 BIOS dated 2013.I went to Lenovo website and downloaded and ran 8DCN40WW.exeInstead of taking normal time to flash, Windows started rebooting after only a couple sec. No bootup. No beep. No Lenovo logo. Power light comes on. Blank screen (no backlight). After 50+ bootup attempts I sometimes get the blue error message at bootup:InsydeH20 invalid firmware image. After changing RAM positions, and trying the Lenovo "rescue" bootup button, I got a bootup.CPU-Z still shows the BIOS is V37 (ie it didn't flash). I know I have Secure Boot enabled. So, to fix this I believe I need to force flash the old v37 BIOS image. SUGGESTIONS?HELP?

A:BIOS v40 flash failed on Lenovo Z410. No boot (screen blank). InsydeH20 invalid image firmware!

Forgot to mention.I already tried "draining power". IE disassembling my laptop, and disconnecting the battery and AC adapter, and holding power button for 60sec+ many times.It doesn't fix the issue.Also, the RAM position etc, obviously has nothing to do with anything. I was able to bootup with exact same 2x DIMM config as originally.

Read other 1 answers
RELEVANCY SCORE 68.8

So I updated my BIOS. I have an HP 150t and the motherboard died so I bought another one online and it was working fine but I decided to update the BIOS going into HPs website which mightve been a mistake. Now onto the problem: When I update everything was fine except it took about 20 seconds for the monitor to light up and after it did it took a really long time from the POST screen to boot into Windows. But after it did it worked like a charm. Now it still does the same except that it wont boot into Windows anymore and Startup repair has not been able to fix it. Thanks a lot for the help

Read other answers
RELEVANCY SCORE 68.8

I have a custom built desktop and an asrock 970M Pro3 mobo. I have windows 10 and I noticed that today my computer was being really slow. I would open google chrome and when I would look something up it took at least 1 minute to load anything. I have an program called rainmeter and a few other addons for it that told me my cpu was at 100%. Long story short my cpu was running at 100% constantly even when (besides for windows programs) I only had skype open. I looked online and saw people were having the same problem. They said to update the bios and the original creator of the thread would always say something along the lines of "Thanks it worked my pc is back to normal!" So I downloaded an update for my motherboard bios and then after I started it my screen went black. Ive tried restarting the pc and dont know what to do. Please help!
 

A:PC Wont Boot After BIOS Update

Read other 16 answers
RELEVANCY SCORE 68.8

I seem to have a very weird problem with my laptop, I am normally a linux user, and have due to work been needing win10.  I decided to install win10 on a second internal ssd by unmounting the cd , and mount a caddy with space for another ssd. I removed my linux ssd, before I installed windows, so no os would be able to interrupts the installation procedure, or atleast interfere with it. After completing the installation, I have been unable to turn on my laptop, the only response i see is the power led blinking twice, and thats it.  The weird part here is,  if I leave it for a couple of days, uncharged and with the batteries out, it will either startup by itself, or start up when I press the power button.  And then go back to the previous state, when I turn it off. It should be noted that I have previously done this, without no problems.. So this is a bit weird for me. 

Read other answers
RELEVANCY SCORE 68.4

I couple days ago I alowed my idea pad to update windows 8. The next time I launched it I got to the desktop but then the screen would flash on and off forever. I downloaded the program to update the drivers because I assumed it was the drivers. After only being able to do anything in safe mode I booted it up but I couldn't get the drivers program onto the computer because safe mode doesn't let you do alot.  I then decided to just do a reset within the windows recovery program. I pressed save personal documents and reset. Now when I turn on my idea pad it just shows a black screen with the loading circle spinning forever

Read other answers
RELEVANCY SCORE 68.4

i recently used the HP support tool to update my Bios on my 800 G2 DM , which now has stopped my PC from starting. I now get an LED /BEEP ERROR Which ive looked up and is : 5.2The embedded controller cannot find valid firmware. Anyone have any idea of how to fix this?

Read other answers
RELEVANCY SCORE 67.2

Hi,
I really appreciate the good design of Dell Inspiration 7353 laptop, it's good, mostly indeed.
Recently I have a problem to use legacy boot (USB, DVD/CD, Internal HD, whatever), after I have upgraded the BIOS to the latest one (Inspiron_3153_3158_7353_7359_7568_1.13.0). Due to legacy boot is required in my daily work, so I will ask for help, see if anyone can give me a solution.
When I used the laptop without any BIOS upgrade, it can boot from any legacy driver (USB, etc) with Windows 7, 8+ etc. 
Then it had a small USB issue, I thought I should try to upgrade BIOS, see if this can help, then soon I started to regret, because I had found that all legacy boot is failed, the Windows 8.1 throw me into a BSOD, tell me PAGE FAULT error. I have tried USB, internal HD & DVD, all same.
Then I googled, saw someone had similar problem (not same), he cleared CMOS by pull out the battery, so I tried it without any hope, but surprisingly, when I pull out the battery and remove the connection of power adapter and laptop battery, by pressing the power button several time with & without power cord connected, then I installed the CMOS battery, laptop battery, restart the laptop.
When I press F12 to load the boot menu, it really can load legacy bootable device, but that's one time thing. After the system reboot, the problem back again, looks like if I want to boot into legacy bootable device, I will have to remove CMOS battery each time like above all...sad.
I thought ... Read more

A:Dell Inspiration 7353 BIOS Update bring legacy boot failed Windows 8.1

By the way, I also tried BIOS recovery from Dell support page, and the recovery screen never showed up at all, and the led blink with white & yellow, even when I plugin in a usb stick with latest flash rom renamed to BIOS_IMG.rcv, still not work.

Read other 1 answers
RELEVANCY SCORE 66.8

I just reformatted a friends Compaq Presario 3000 laptop with win xp pro. Everything was working fine on it until I updated the bios. Now the computer starts to come on and then shuts down after about a second. I have tried draining all the power but get the same result. All ideas welcome. Thank you.
 

A:Compaq Presario 3000 wont boot after bios update

Read other 9 answers
RELEVANCY SCORE 66.8

I updated my BIOS. On windows 10I did download the 6scn31ww.exe And installed it.But my laptop not boot and Enter the boot menu.

Read other answers
RELEVANCY SCORE 66.8

Hello. My aspire 4752g wont boot after the bios update was interrupted. I just finished formatting my laptop and decided to reinstall the drivers but ended up i flashed the bios instead. As i was updating the bios, it stays in "blank screen" for quite a long time and i was so worried that i decided to force shutdown the laptop. When i try to boot it again, it stays in 'blank screen' with power indicator on and fan running. Are there any solution for my problem? Pls help me. Im using windows 7 home premium with 4GB x 2 sticks of RAM installed. Thank you in advance.

Read other answers
RELEVANCY SCORE 65.6

Hello, Recently my G460 is producing disturbing noise. Since there's a chance that its HDD is already near its limit (my laptop is almost 6 years old), I'm preparing to buy a new HDD to replace it. However, does this type support 1TB HDD (my current one is 500GB 5400rpm SATA)? And what happen if I'm using HDD with unsupported size?Thanks in advance!

Read other answers
RELEVANCY SCORE 64.8

Hi,currently my laptop keep BSOD after startup and its happen randomly.

Mode: Laptop Lenovo G460
Windows: OEM Windows 7 Home Premium 64BIT
Buying this laptop last year so its new.
Never formated.
Using Malwarebytes and AVG free.

Help me pls. i need this laptop to do my assignment.
Thanks very much all specialist.

A:BSOD ,Lenovo Laptop G460

  
Quote: Originally Posted by rOnnyJustrOn


Hi,currently my laptop keep BSOD after startup and its happen randomly.

Mode: Laptop Lenovo G460
Windows: OEM Windows 7 Home Premium 64BIT
Buying this laptop last year so its new.
Never formated.
Using Malwarebytes and AVG free.

Help me pls. i need this laptop to do my assignment.
Thanks very much all specialist.


Most of these were memory corruption caused by a driver. There seem to be a few drivers that are suspect.
Please run memtest for you ram

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86.com - Memory Diagnostic

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Also Please run driver verifier to find out which driver is at fault.






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repai... Read more

Read other 9 answers
RELEVANCY SCORE 64.8

 Hi, I have recently got Lenovo G460, I've noticed that the touchpad is not responsive, sometimes. Does it have settings to adjust the responsiveness of the touchpad? Or the pressure to the track point with your right or left index finger affects the responsiveness of the touchpad? Does anyone experience this with their touchpad? Thanks a lot!

A:Lenovo G460 - Touchpad Problem

Me too much concerned about this, but no one seems to respond.

Read other 9 answers
RELEVANCY SCORE 64.4

Help me. I dont know why my laptop getting stuck in blackscreen after booting and logo lenovo. Nothing appear. No cursor or error message. I dont know how to fix it. I'm in windows 10. And cant open the safemode. Help me master.. thx

Read other answers
RELEVANCY SCORE 64.4

Hi, I want to upgrade my old wireless card Atheros AR9285, but i read some issues with whitelist on lenovo bios...Can you help me to choose the best Wireless adapter and hack this whitelist?My routes is an Archer C9 from TP link, dual band AC, so i need an AC wireless Card.What Wireless card i should by? Thanks for aswering. Raffa 

A:Lenovo G460 - Wireless Upgrade/Whitelist

You should look at the parts list in your service manual.  This can be found online (see support tab on this page) under the documents for your notebook.  There are only a few options to choose from and if a desired device is not present in that list it will usually not be allowed by the BIOS.
 
Also - you should only purchase and install WiFi cards "branded" for Lenovo by Lenovo.  If it is stated to be compatible by seller but does not cary Lenovo branding it may not work in your notebook.
 
The "whitelist" idea was created to keep support options limited to a smaller group of known good and tested devices.  This minimizes complications with troubleshooting and online support agents knowledge of products.
 
Good luck.
 
CB

Read other 3 answers
RELEVANCY SCORE 63.6

I need to upgrade present Pentium processor to i3 or i5 is this possible 

Read other answers
RELEVANCY SCORE 62.8

I'm a new owner of a Flex 4-1570 Ideapad. I have a critical update awaiting install, however the window popup says it is for the YOGA not the Flex. Thus, I have not installed it. My question is, should I install it? If not, how do I turn the notification off? Thanks! 

Read other answers
RELEVANCY SCORE 60.8

I have this game that shuts down shortly after loading. The help program suggested I check out the dxdiag, so I did, and i did some checks and then it told me this-Hardware accelerated Direct3D 8+ is not available because the display driver does not support it. You may be able to get a newer driver from the hardware manufacturer. Along with Direct3D 8 test results: Display driver does not support API (DDI version too low)
Direct3D 9 test results: Display driver does not support API (DDI version too low)
So, I went looking for an update i found one, I installed it and nothing happened. It said it finished and i restarted but nothing different happened. So, what am I doing wrong?
Os-Win 98 se.
Diamond Stealth II g460/version-4.10.001.1346
 

A:Installing an update to Diamond Stealth II g460

This card was originally disigned for Direct X 5 and/or 6. It will not function with Direct X 8 or higher. What kind of game are you attempting to play?

Diamond Stealth 2 specs:
64-bit maybe even 32-bit
170MHz RAMDAC
BUS PCI 2.1 Compliant
MEMORY 4MB SDRAM
 

Read other 3 answers
RELEVANCY SCORE 60

Im working on a Toshiba Laptop A105-4284, Model #: PSAA8U-0FH02K that froze while trying to flash the BIOS, so I didnt know what else to do but shut it off. Now, when I try to boot it up, it gets stuck in the same place it did during the flashing; on the Toshiba splash screen with the status bar at the bottom showing about 20% complete. I cant get into the BIOS and cant boot into Windows. Other options available on this screen are Press F2 for System Settings and F12 for Boot Menu. Pressing F2 results in a beep and the status bar changing to "Please Wait..." but nothing else happens no matter how long I wait. Pressing F12 doesnt do anything. Pressing ESC takes me to a screen that shows the typical system info -- Phoenix Technologies Version 6.00; Intel Calistoga CRB.T3A Reference BIOS; VERSION.MAK 1.53; (looks like its running POST and recognizes CPU, Cores, No TPM or TPM has a problem, and system RAM and stops there. What is my best course of action?:

- shorting out the CMOS battery (I've tried this on the solder pads marked C88, with no laptop battery, with and without the wi-fi, ram and hdd installed; Im either doing it wrong or its just not working )
- trying to reflash BIOS chip (I tried this; turned the laptop on and held down the 'c' key to boot from cd, but still got stuck at the same place)
- replacing the BIOS chip
- something else?

Any guidance or information you can provide would be greatly appreciated.

Please feel free t... Read more

A:Toshiba A105: Failed BIOS flash; now no BIOS access & won't boot

Im trying to figure out why I've had no replies yet.

Have I asked a stupidly easy question that everyone is rolling their eyes to and cant bear to tell me the answer? Or have I stumped everyone?

I have a hard time believing this is a stumper. I've found the same question posted elsewhere on the net and shorting the CMOS seemed to help. That or removing the battery altogether (its soldered to the board), but I dont think Im doing it right. Can someone give me directions on that?

or is this just a lost cause? :-/

Thanks in advance
 

Read other 1 answers