Over 1 million tech questions and answers.

Cant get ethernet working

Q: Cant get ethernet working

Im using eduroam internet that is provided on my campus.Im signed in and logged with wifi on this network,but it seems i cant get it work using ethernet cable.Every time it says Unindentefied network and that "ethernet doesnt have valid
ip configuration "when i run troubleshooter.
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : JustOneRailgun
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : kampus.scst.hr

Ethernet adapter Ethernet:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek USB FE Family Controller
Physical Address. . . . . . . . . : 00-E0-4A-36-A9-4B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::6865:5d54:8541:65eb%8(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.101.235(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 134275146
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-21-C3-37-2B-90-48-9A-DB-2D-1B

DNS Servers . . . . . . . . . . . : 8.8.8.8
8.8.4.4
NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Local Area Connection* 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 12-48-9A-DB-2D-1B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wi-Fi:

Connection-specific DNS Suffix . : kampus.scst.hr
Description . . . . . . . . . . . : Dell Wireless 1506 802.11b|g|n (2.4GHz)
Physical Address. . . . . . . . . : 90-48-9A-DB-2D-1B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::a03f:a502:a9b9:974e%3(Preferred)
IPv4 Address. . . . . . . . . . . : 10.16.142.150(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Lease Obtained. . . . . . . . . . : Tuesday, February 27, 2018 1:43:11 PM
Lease Expires . . . . . . . . . . : Tuesday, February 27, 2018 10:23:24 PM
Default Gateway . . . . . . . . . : fe80::3cb7:a9b8:edfb:874f%3
10.16.0.1
DHCP Server . . . . . . . . . . . : 10.16.0.1
DHCPv6 IAID . . . . . . . . . . . : 59787418
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-21-C3-37-2B-90-48-9A-DB-2D-1B

DNS Servers . . . . . . . . . . . : 193.198.184.140
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.kampus.scst.hr:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : kampus.scst.hr
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{45507AC7-CCF2-4253-B1AA-0FEC25C1A6CA}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Windows\system32>

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Cant get ethernet working

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 44.4

Hi,

I have a linksys model wrt54gl v1.1 and I am using Windows Vista 32bit Home Edition. I have a pc connected to the router directly through an ethernet plus a laptop, 2 iphones and a blackberry that get wireless internet from it. 2 days ago wireless stopped working. The internet on the pc connected to the router by ethernet is still working and the power, WLAN, ethernet, and internet lights are all lit green. The internet and ethernet lights flash when data is being transferred but the the WLAN light is not flashing. I have restored the router to factory default but it is still not working. The phones and laptop are not detecting any wireless network present. Hope you can help.

Paul
 

A:Internet working on PC connected to router by ethernet but wireless not working

I have restored the router to factory default but it is still not working.Click to expand...

The only other thing to try is to unplug the router for a few hours. You could also try another factory reset.
 

Read other 1 answers
RELEVANCY SCORE 43.2

Hi

My Ethernet started malfunctioning recently. My Notebook PC works fine with Ethernet connection at my workplace but recently started malfunctioning at home. The wifi connection is still in order both at home and at my workplace. My PC is Windows 10, i7 processor.

Can you advise how to solve the problem?

Thanks
 

Read other answers
RELEVANCY SCORE 41.6

My wireless is not working. I have tried looking at comments on line but nothing seems to work!
If I use the CMD code I get this for the ether net:
ipv4: 94.205.214.13
subnet: 255.255.255.0
Default gateway: 94.205.214.1

I have a sitecom router if that helps at all? It says to go to 192.168.0.1 which I have done but sdtill confused!Thanks in advance
 

A:Wireless not working, ethernet is working

All the above looks good. Using 192.168.0.1 as a URL in your browser, you should get a request for the user/password for that router. Once you login, you can go to the WiFi portion, enable it, set the SSID and encryption you desire.

Where do you get stuck?
 

Read other 4 answers
RELEVANCY SCORE 40.8

Vista Ultimate 64-bit, ASUS Rampage Formula motherboard, USB mouse and keyboard connected in back ports.

Two things happened: Avira antivirus warned me of some threats which I either ignored or deleted. Windows Update had some updates ready (although I'm not sure if it updated).

I turned off my PC for a couple of hours, turned it back on and realized that my USB keyboard was not working on the password screen.

I eventually unplugged it from the back and plugged it into the front, where it worked. However, my USB mouse did not work when plugged into the second front port, nor did it work when plugged into the front port in which the keyboard worked.

I accessed System Restore using my keyboard and restored to one day previously. When it finished, both keyboard and mouse worked, although I got a pop-up message alerting me that the "drivers for your device could not be installed." When I clicked "OK," the mouse stopped working again.

I have checked BIOS and both mouse and keyboard are recognized, so it does not appear to be a hardware issue.
 

Read other answers
RELEVANCY SCORE 40.4

My motherboard is a msi n1996. Running windows xp professional 2002 service pack 2. I am hardwired for the internet thru comcast but my computer does not recognize my ethernet or PCI card. I've downloaded drivers for it (realtek 8101L driver) but it now tells me to turn off computer and install PCI card.?? I think my roommate went into the Bios and changed something because before he did i was able to connect thru the direct line. Please help me figure out why it isn't working. Any one ???
I am using wireless internet thru the neighbor temporarily. Thanks.

A:Ethernet PCI NIC not working

If windows is finding it, then the BIOS wouldn't have impacted it. I would buy a new network card, and try it. They are under 40 bucks. I recommend buying Intel.

Read other 2 answers
RELEVANCY SCORE 40.4

My ethernet is not working but my wifi on the same computer is working(using wifi to post this). I attached an image of my resource monitor it shows me trying to download. The weird part is sometimes it goes up to my normal speed(32mb/s) for like 4 seconds and then it drops to not working at all and when I try to load a website I have to refresh a few times and pray.

I tried connecting the wire to my laptop (same wire and wall port) and it works fine. I ran malwarebytes and found one threat but the problem was not solved. I ran it again a few more time and it says I don't have anything else.

I have no idea what's (kinda computer noob) going on so any help would help.
Thanks
 

A:Ethernet is not working

You didn't provide any descriptions of your laptop and desktop and which Windows version they're running.

A wired ethernet connection is working okay in your laptop, but not in your desktop?

---------------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 40.4

Ok i just got a new brand router and I was trying to connect it thro lan to my PC which has a crappy wireless range, So I connect the cable and i get the massage "Network cable unplugged", However, I tried it on 2 other laptops and it worked great IBM(XP) HP(Vista).

-I own a HP Pavilion a6140.me. Just to let you all know that there is nothing wrong with the cable because it used to work great on our old router.
 

A:Ethernet not working.

Read other 6 answers
RELEVANCY SCORE 40.4

Windows xp service pack 2
Athlon 64 3500+ 2.2 GHz CPU
2 x 1GB PC2700 DDRMSI K8T Neo2-F V2.0 Motherboard
100gb WESTERN DIGITAL HD
120 HD
ATI 512 x1950 pro
Hello

I have just got a phone plug in my room so I do not have to use my USB adaptor for my wireless broadband as it keeps losing the signal. I now have the router in my room using the Ethernet hole on my new MSI K8T Neo2-F V2.0 Motherboard, but every time I try and download a file it is corrupted. I have tried many different file just in case it was that. This did not work so I tried using my USB adopter and every thing downloads fine again. The driver for it is Realtek rtl8169/8110 family GIGABIT ETHERNET NIC and this is the web site for the motherboard nhttp://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3318077&CatId=15

Hope some one can help me with this.
 

A:Ethernet not working help

Read other 16 answers
RELEVANCY SCORE 40.4

My ethernet connection seems to have suddenly crapped out which has left me using the USB port. But that means I cannot establish my home wireless network.

My ISP troubleshooting help line could not tell me anything beyond it being an ethernet problem.

Any help troubleshooting and re-establishing is much appreciated.
 

A:Ethernet not working...

"... ethernet connection seems to have suddenly crapped out" implies
1. bad ethernet adapter,
2. bad ethernet cable, or
3. bad something at the other end of the cable.

Can you try another cable?

Can you try something different at the other end of the cable (e.g., if it was a router, try a different LAN port)?

Can you try the same setup but with a different computer?
 

Read other 3 answers
RELEVANCY SCORE 40.4

Hello, i have a desktop computer which used to get internet from a secondary router we had. It is a Jensen Scandinavia. One day when i logged onto my computer i noticed i had no internet, and it hasnt returned since that. It shows a yellow exclamition point by the internet icon, and says no internet Access. My secondary router Works fine With everything else than my computer, both wifi and Ethernet. Of all Electronics we have in the house, its only my computer who doesnt work. I have a cable that goes from my main router and to the secondary router, if i stretch that into my room it will allow me to get internet Access, so the problem isnt my main router. My Ethernet port on the computer is blinking green some times aswell, but i get no firm Connection. I also do not have a default Gateway.

Additional info: when my internet stopped working, i looked into my Device manager and found pseudo tunneling Interface With a yellow exclamition mark. I uninstalled it in hope that it would be reinstalled and making my computer work aagain, but it didnt get reinstalled ;(

Ty for the help, much appreciated.

A:Ethernet not working!

The Pseudo Tunneling Interface is for IPv6, which is not used currently for Internet Access. When you right click this yellow flag and Uninstall it , it should not come back.
If you have no other yellow flags in the Device Manager, then to test your internet connection, plug this computer directly into the Main Router rather then the secondary one.
Then follow these instructions Pre-posting Requirements - for both Wired and Wireless Connectivity Issues and paste your ipconfig log in your next post.

Read other 1 answers
RELEVANCY SCORE 40.4

I recently formatted my laptop and installed windows 7. In installing drivers, specifically network drivers, I installed the wrong drivers, realized deleted them and then installed the correct drivers, but now the ethernet port does not work. In device manager there is no little yellow alerts, I've scanned for hardware but nothing. Is there a way I can check the health of my ethernet port?

Please Help.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 1908 Mb
Graphics Card: Intel(R) HD Graphics, 730 Mb
Hard Drives: C: Total - 165886 MB, Free - 125994 MB; D: Total - 119999 MB, Free - 71114 MB;
Motherboard: SAMSUNG ELECTRONICS CO., LTD., RV411/RV511/E3511/S3511/RV711
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Ethernet Not Working

Read other 9 answers
RELEVANCY SCORE 40.4

I just had a technician come to my apartment today and install a wired connection to the router. However, my computer is still using Wi-fi, and it doesn't recognize a wired connection. My ethernet cable connects to an RJ45 port, where there is a cable running underneath the carpet to the router. I suspect that the ethernet cable running from my computer to the port might be faulty, but want to make sure there's nothing else wrong with it before I replace it.
 

Read other answers
RELEVANCY SCORE 40.4

Hi there!

I have no experience at all with computers/connection issues, so apologies for my poor use of terminology.

I live in the Bay Area and I have xfinity/Comcast.

Around a week ago, I stopped being able to connect to Ethernet. After troubleshooting, I found that the error was "One or more network protocols are missing" or "Windows Sockets Empty".

I have already tried the following things:
1. Reset my computer / made sure all the cords were plugged in
2. Did a "netsh" in command prompt to reset my IP
3. Gave "Full Control" to everyone in folder 26 in my Registry Editor
4. Did a "netsh" to reset my winsocks
5. Disabled NETBIOS on both wifi/ethernet

I also couldn't find any new drivers...

Each time I tried one of these fixes, I would have ethernet for ~5 minutes after I restarted my computer. Afterwards, it would instantly disconnect me and connect me back to WiFi.
After I tried disabling WiFi, my ethernet connection would still dc, but I would simply have to troubleshoot it, and would work again after restarting my adapter.

Is there any way for me to fix problem for good? My WiFi cuts off really randomly from time to time and that's really frustrating..

If there's anything I missed please let me know and I'll try to provide it!

Thank you so much!

A:Ethernet Not Working

The link that shows up on your post - "I also couldn't find any new drivers..." - If you posted that intentionally, do not use the 'driver updater' program it links to. It's malware. My question would be who is the oem of your computer, and which LAN card make/model?

Read other 2 answers
RELEVANCY SCORE 40.4

Hello. Ive ran into a problem which i pretty much caused myself, i tried to update my ethernet drivers in the device manager but i fatfingered it and pressed uninstall device (yup, clicked twice even to it warned since im dumb) Now that i tried to reinstall it, it just presents a yellow triangle with an exclamation mark on top of it. Ive scouted all over internet for a answer but so far nothing has worked. Anyone know how to fix this?
 

Read other answers
RELEVANCY SCORE 40.4

All my Nvidia programs got uninstalled, and now my ethernet connection isnt working. I have a Wireless router and the rest of the comps on it have internet, but my comp is connected through a wire but is recieving nothing. please help
 

A:Ethernet not working

Do you have a nVidia chipset and/or an integrated ethernet adapter? Please put back the chipset drivers
 

Read other 1 answers
RELEVANCY SCORE 40.4

I plugged in my Ethernet cable to my pc and my router but for some reason it is not working. It says Unidentified Network and just below says No Internet. I don' know how to sort it out.
 

Read other answers
RELEVANCY SCORE 40.4

Hello, well this i my first problem post on here. I recently had to dump everything on my computer to get rid of Surfsidekick adware that ruined it. Well I started from scratch with reinstalling windows XP and everything. I put in the restore disk that came with my Dell Dimension 2400 cpu and got what ever programs i thought were nessesary. Could have missed some. I have no idea whats needed. After all that I couldnt connect to the internet with my Ethernet Cable. My wife plugged in the USB to our cable modem and thank god that worked cause i would not be typing this to you right now. Under my Device Manager under other devices there are yellow question marks with small exclamation points on; Ethernet Controller, PCI Modem, and USB Digital Still Camera. Im thinking i need a Ethernet Driver but i dont know which one from the Dell site to download or if that is even the problem. Someone please help.
SSgt Ernest Cooper USAF

A:Ethernet Not Working

You might be able to get some help from your SIP on this one.

Read other 5 answers
RELEVANCY SCORE 40.4

This is my first time here so I hope I have the right forum. We have 2 laptops and 2 desktops.My sons desktop was fine when he went to bed and when he woke up he could not connect to our d-link dir-655. it says no network to connect to. I have changed the Ethernet cord and this did not help. Is there any way to tell if the motherboard Ethernet has went bad? He has a gateway with windows vista. Thanks.
 

A:Ethernet not working

Welcome to TSG
Ok.So is this the only pc on your home net that is having this problem ?
And it is ethernet not wireless ?
Make and model of modem and ISP name ?
So from the failing pc let's see:

From a Johnwill post on the Networking Forum

Try these simple tests.

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type the following commands one at a time, followed by the Enter key:

IPCONFIG /ALL

PING <computer_IP_address> For addresses,follow instructions below&#8230;.

PING <default_gateway_address>

PING <dns_servers>

PING 206.190.60.37

PING www.yahoo.com
Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above. IPV4 for Vista

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
______
 

Read other 2 answers
RELEVANCY SCORE 40.4

I'm having a very similar problem. I can connect wirelessly using my laptop to the internet through my netgear router, but not using my desktop. The desktop is plugged in directly to the router through the ethernet port, but the router light indicating a wired connection isn't lighting up. I've tried installing the router software on the desktop (running winXP), but the installation won't complete as it can't detect the router.

Device manager says that the adaptor is working properly, but the icon in systray says that a network cable is unplugged. I've tried 4 different cables, so I don't think they're to fault.

When I open the command prompt on my desktop and type ipconfig /all:

Ethernet adaptor local area connection:

media state: ...... media disconnected
description:...... SiS900 pci fast ethernet adaptor
physical address:... 00-14-85-6F-AE-05

Any help would be greatly appreciated.

P.s. When I plug my laptop in to the router using the ethernet cable, the router's light comes on, showing that it is connected.
 

A:Ethernet not working

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Thanks for your cooperation.
 

Read other 2 answers
RELEVANCY SCORE 40.4

I'm having problems with my ethernet. I don't think my computer is detecting my ethernet because my internet doesn't work when i try to connect with my ethernet. I think it stopped working after i recovered(where it deleted everything) my computer. So i'm hoping someone can help me fix it. Thanks
 

A:Ethernet not working.

Read other 15 answers
RELEVANCY SCORE 40.4

I have a Satellite 105A S361 System (Toshiba) The ethernet all of a sudden, does not work, I plug the cat5 in and neither the green nor the orange light flash, I've downloaded the new driver for it, and still nothing. What do I do?

A:Ethernet Not Working

Mike711, welcome to TSF.

The port sounds damaged, but have you tried a different ethernet cable? Sometimes the pins can become damaged, or the wiring can become loose.

Read other 1 answers
RELEVANCY SCORE 40

I dont know if this is in the right section but I am using windows 7 and when i start my computer everything works fine until the windows logon screen when the mouse and keyboard stop working. Both are usb and my ps/2 is working fine. I went into device manager and my ethernet and usb drivers had exclamation points on them and the issue was that they could not start. I disabled and re-enabled all of these and they now work 100% until i restart my computer again then i have to continue the process. Any help would be appreciated thanks!
 

A:Ethernet and usb not working on startup

once you are on the device manager, right click and uninstall drivers if you have an option, it will be out of the list after that, and re-scan for devices or reboot the PC for Windows to automatically install drivers for USB ports..
 

Read other 2 answers
RELEVANCY SCORE 40

The other day I woke up and found windows 10 installed on my PC, it installed itself overnight without permission. I was confused and reverted back to windows 7 immediately (not that I have anything against windows 10, just I was happy with how my pc was running before).

Now the internet doesn't work, I've tried the troubleshooter and eventually it comes up with "Local Area Connection doesn't have a valid IP configuration". It's set to obtain IP and DNS automatically in my connection properties.

I've tried all the basic things like turning router off for 10+ seconds, restarting computer and replugging in all the ethernet cables on the switch box and router. The internet is working fine on every other device in the house, wireless and wired. It was working fine until the upgrade and rollback from windows 10, which is why I put this thread in windows 7 support instead of networking support.. but maybe it belongs there I'm not sure.

Here's what I get from ipconfig /all in cmd:


Windows IP Configuration

Host Name . . . . . . . . . . . . : Tom-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Ethernet Connection I217-V
Physical Address. . . . . . . . . : E0-3F-49-AD-82-03
DHCP Ena... Read more

Read other answers
RELEVANCY SCORE 40

The other day I woke up and found windows 10 installed on my PC, it installed itself overnight without permission. I was confused and reverted back to windows 7 immediately (not that I have anything against windows 10, just I was happy with how my pc was running before).

Now the internet doesn't work, I've tried the troubleshooter and eventually it comes up with "Local Area Connection doesn't have a valid IP configuration". It's set to obtain IP and DNS automatically in my connection properties.

I've tried all the basic things like turning router off for 10+ seconds, restarting computer and replugging in all the ethernet cables on the switch box and router. The internet is working fine on every other device in the house, wireless and wired. It was working fine until the upgrade and rollback from windows 10, which is why I put this thread in windows 7 support instead of networking support.. but maybe it belongs there I'm not sure.

Here's what I get from ipconfig /all in cmd:


Windows IP Configuration

Host Name . . . . . . . . . . . . : Tom-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Ethernet Connection I217-V
Physical Address. . . . . . . . . : E0-3F-49-AD-82-03
DHCP Ena... Read more

A:Internet not working (Ethernet)

I would start by deleting the Intel network adapter from device manager and deleting any associated drivers. Then reboot.


Download the updated driver for Windows 7 here if Windows doesn't load one on reboot:
https://downloadcenter.intel.com/dow...for-Windows-7-

Read other 1 answers
RELEVANCY SCORE 40

Hi, so basically I am using a windows 7 computer, and my WiFi doesn't seem to be working. To be exact, my Ethernet cable is working but my wireless isn't... before (a few days ago) it seemed to be working when I restart my computer, or just simply restart my router. But now, when I've tried it about 10 times, the WiFi is still not working :/

Thanks for the help
 

A:My ethernet is working but internet isn't

What is this computers make and model?
 

Read other 4 answers
RELEVANCY SCORE 40

I like to think I have never been beaten (reformat the system will fix it but thats to easy)DesktopVista Home EditionGigabyte series Mother BoardI have a user who has cleaned out his system rebooted and ever since then the system wont connect to the internet. Ethernet symbol bottom right hand corner with red cross.Steps I have taken to resolve this.Ran repair and diagnose, error "either driver or Hardware issue"Uninstalled driver and reinstalled lastest driver.Device Manager, uninstalled ethernet card reinstalled, disabled re-enabled. when disabled ethernet symbol should disappear but doesnt.Installed another ethernet switch still nothing.Ran Combo fix, malware bytes (found websearch) nothing major.Went through Hi Jack This filesChecked my internet connection lolAm wondering if there maybe something in BIOS however?Has anyone come across this before? I dont think it's the mother board.

A:Ethernet switch not working

I have a user who has cleaned out his system What does that mean?

Read other 4 answers
RELEVANCY SCORE 40

I'm sorta in a jam. I have a dell Inspiron from 2010 desktop of and today when I turned it on it went through all the boot up sequence normally. I try to login but I can't the USB mouse or keyboard are lighting up since the mouse is a laser and the keyboard has the num lock light. I go to the back and check and see if my Ethernet light is on its off. I pulled out my USB and tried the one in the front no luck. When I enter bios the keyboard works. Also I turned off the computer holding the button unfortunately. I pulled the plug out and held the power button for 30 seconds to drain the on board battery. When I turned it back on I had no luck both the keyboard and mouse were not working and the Ethernet light is still off. One more thing my PSU has always had a small led on it it always lit up green and it still was. Please help I'm laying down on my bed hopin I can get answers. I won't be able to answer any posts left until after 2:00pm tommorow.

A:USB and Ethernet light not working

Have you checked on these devices in the Device Manager? If so then please post there status and a screen-shot of the Device Manager showing these Devices.

On some Laptops you have to press a Button for the Ethernet or Wi-Fi to become active.

Read other 3 answers
RELEVANCY SCORE 40

I got home today and found that my computer wont connect to the Internet. I unplugged the cord and found that both status LEDs were on so I plugged it back in and they stayed on. I plugged the ethernet cable to my laptop an it works fine. Anyone know a fix for this problem?
 

A:Ethernet port not working

can we see an ipconfig /all and device manager
I unplugged the cord and found that both status LEDs were on Click to expand...

where are these lights - next to the socket on the PC _ green and yellow ?


------------------------------------------------------------------------
Device Manager
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

windows key and pause Key should open to allow device manager to be seen on laptops may need to use windows key + FN key + Pause Key
if not then

Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X
post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
Full details are her... Read more

Read other 3 answers
RELEVANCY SCORE 40

Hi guys..

So I have run into a strange problem over the last 2 days..

I suddenly (literally) cannot access the internet using ethernet on my desktop PC. I tried the same ethernet from the same port of the router into my laptop and it worked fine, so guessing it's an issue (HW or SW) with the ethernet settings or HW on the PC itself?

How can I diagnose?

I have attached a photo/screenshot of the ipconfig/all command..

Any help much appreciated!

D
 

A:Ethernet stopped working!

Read other 15 answers
RELEVANCY SCORE 40

I"m a newbie here, so please lead me in simple terms(I dont know anything about tcip/ip, nic, etc etc).

My computer has always been fine connecting to the internet via regular ethernet cable. Due to a recent storm which fried my cable modem, my cable company came to replace my modem with a scientific Atlanta modem.

This time, the internet would not work with the ethernet cable. no connection at all. So instead of the ethernet, he just plugged a USB and it worked fine.

Anyone know how to get the ethernet 'jack' to work back up? Is it some settings on the desktop? I'm in the process of pulling my old wireless router and installing it, so my laptop can be wireless freely. However, my router only has ethernet ports.

I also want to add that if I plug the modem to my laptop via etherent cable, it works fine.
someone please lead me step by step on what and how to troubleshoot. I'm not network savvy at all.

thanks
 

A:ethernet cable not working...help!

Read other 6 answers
RELEVANCY SCORE 40

I have been trying to get my ethernet drivers to work for a while now with no success. I have installed and updated them but I still recieve the exclamation mark down below them. I have a ethernet cord that previously worked but it seems something has changed internally and now I cannot connect to the internet via ethernet. After uninstalling the ethernet drivers and trying to reinstall it said installation failed, Device driver software was not successfully installed. Any help would be appreciated.

A:Ethernet drivers not working.

Hi Welcome to Seven Forums ... Could you Please Post your System Specs ... The Link below will help you achieve this ...
System Info - See Your System Specs

Read other 1 answers
RELEVANCY SCORE 40

Good evening,

I just build a new computer this weekend and originally used the ga-880-ga-ud3h mobo... i installed windows and everything was working fine (windows 7 x64), today i decided to replace the mobo with the 890gpa-ud3h. now the internet wont work and it says there is no network driver. i tried loading the cd it came with but the cd says everything is installed. please help soon!

thanks everyone
 

A:Ethernet not working on new MOBO

Are all drivers installed according to Device Manager? Is the ethernet enabled in BIOS?
 

Read other 2 answers
RELEVANCY SCORE 40

Hey,

Earlier this week there was an update for windows 10, I'm not sure what the update was but it took about an hour to install so was fairly big (although I see no real changes). Anyway, since then the ethernet adapter no longer works when the computer starts up. It just says unidentified network and that no cable is connected (the cable definitely is, and I've tried different cables and same result).

Anyway, the solution is to disable the adapter and enable it again, and then it works as expected. The problem is, it will randomly stop working sometime when you start the computer up again, and so you have to go through the process again. I've tried updating the driver, but there are no new updates. Reinstalling the driver is only a temporary fix, as the problem will arise again the next time I restart the device. Is there any permanent solution for this?

Anyway, thanks for taking the time to read this post, any suggestions are greatly appreciated!

Some system info:
Edition: Windows 10 Home
Version: 1511
OS Build: 10586.164
Network Adaptor: DM9621A USB to Fast Ethernet Adapter(KMDF)

Read other answers
RELEVANCY SCORE 40

I just turned on my computer and windows is telling me that my Ethernet port is un plugged. Reinstalling the drivers for it didnt help. When i try and plug it in, the orange and green lights flash in this pattern: O . . . O G G G . . . and repeats. On other Ethernet ports the green on stays on and the orange one flickers. Is there any way i can install a new one? It looks as though the port is mounted on the
motherboard and I dont want to buy a new one.

A:Ethernet port not working

If you have a an open PCI slot you can add a card which should do the trip for you

Read other 3 answers
RELEVANCY SCORE 40

I have an Acer Aspire 7552G laptop running Windows 7 x64 that is having problems with connecting to the internet.

I started to notice the wireless and LAN connections becoming very weak, web pages would load slower, data would take longer to download, etc. This lasted for a couple weeks. As of now, I cannot get any signal, neither wireless nor LAN.

I normally use Google Chrome but have tried to connect through multiple browsers.

I have tried updating the wireless/ethernet drivers, and I have also tried uninstalling them all together and reinstalling them. Both to no avail. I have no idea how to resolve this issue and am hoping the tech pros here can help me out!

Wireless LAN and LAN vendors are both Broadcom and the drivers can be found here: Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 7552G


*I am connecting to internet on a university campus.

A:Wireless & Ethernet LAN - Not Working?

How are you measureing the stregth of the ethernet connection?

Who is your ISP ?. . What Brand and Model is the Modem and Router?


Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL


Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

then please Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error abo... Read more

Read other 16 answers
RELEVANCY SCORE 40

After a recent failure of the wireless router the laptop refuses to connect to Ethernet LAN wired network.Even after a full format of HDD and reinstallation of OS (Windows XP).The Ethernet driver downloaded from HP (compaq) support did not worked,also if  I let windows (from Wireless connection that worked) search for and install Ethernet adapter.The LAN connection can not receive any data (on status has received 0 - at any time)Can not receive IP from router, and if I set an IP (manual) and ping to Gateway (router) obtain 0 packets received.I have a good network and everything works but for this (2 there are 2 identical) Compaq 6820s.I tested LAN of the Compaqs with a Live Linux CD and it worked OK. So it is about Windows, drivers, or virus.Please help!

Read other answers
RELEVANCY SCORE 40

 HP 250 G2 Laptop upgraded to Windows 10 and now my network adaptors are not working.1. Device manager says that Wi-Fi driver is up to date2. Wi-Fi sees my router, asks for password and shows that connection established, but with no Internet3. Adapter Status shows : media state - enabled, but IPv4 connectivity: No network access. Network connection details page is empty4. Trying to diagnose - it says that I have a problem with adapter driverThe same with ethernet.I got:Wi-FI - "qualcomm atheros qca9565 802.11b/g/n wifi adapter"Etheret - "Realtek PCIe FE Family Controller"

A:HP 250 G2: Wi-Fi / Ethernet not working after upgrade to Win...

Hi: Did you install the W10 wireless and ethernet drivers?  That would be the only suggestion I can offer. Ethernet:  Download, unzip and install the 1st driver on the list. http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy... Wireless: This package contains the driver installation package for the Qualcomm Atheros AR9000-Series wireless LAN Controller in the supported models and operating systems. ftp://ftp.hp.com/pub/softpaq/sp71501-72000/sp71858.exe

Read other 3 answers
RELEVANCY SCORE 40

Hello, i just found out we had a computer lying around in the house. I've managed to boot it and everything works completely fine, except for the ethernet. It says its connected, it's receiving packages and all that, but when i try to connect to the internet it just says You are offline. It says t
he internet is connected. Im using "Black XP"

Network driver/card is Realtek RTL8169/8110 Family Gigabit Ethernet NIC
Dont know if the network driver is the problem, it might be. But then i wonder if anyone could give me the link to the newest driver. Ty.


Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : pal
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit
Ethernet NIC
Physical Address. . . . . . . . . : 00-50-8D-E7-F2-1C
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.38.124
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : fe80::250:8dff:fee7:f21c%4
... Read more

A:Ethernet not working properly.

Please read our rules . . a link to them is at the top of every page.

We are not going to help with pirated software

Read other 1 answers
RELEVANCY SCORE 40

Hi guys, first post here. I don't know much about tech so joined here for help. I moved into a new house (rented) and we have virgin media internet with their infamously reliable super hub

I can connect to the internet fine with an ethernet cable but only get "local" access when attempting with wifi. My friend can get on wifi fine on his laptop and my wifi works fine on other networks which leads me to believe its just some settings that need changing. I will try to attach a picture of my ipconfig with wifi switched on and no ethernet cable in.

Any help on this would be much appreciated, I've googled for hours and hours but nothing anyone suggests on there has worked for me.

Cheers for any replies
 

A:Wifi not working, ethernet does

Is that Cell phone internet your using there. Disabled Wired connections when using WiFi connections don't have both enabled. Also are you sharing internet or WiFi in this building?
 

Read other 6 answers
RELEVANCY SCORE 40

Hi guys ,I am facing the weirdest problem . when I m trying to connect my laptop using wifi , my modem get rebooted ..all light gets off (DSL,WLAN,Internet) automatically . is it any malware or what ? I have updated my BIOS , my wireless driver ..but nothing worked .nd when I m connecting using ethernet its working fine , modem working smoothly .
 

A:Wireless not working, but ethernet does

Hi Sssstud,

Please let us know the message you see when you try to establish a wireless connection to the internet. Is your computer able to detect wireless networks? What version of Windows are you using and what is the model and name of the wireless router?

Thanks and regards,
Babita G
#iworkforDell


For easy access to drivers, manuals and product updates, please visit our Support Site .
 

Read other 3 answers
RELEVANCY SCORE 40

I was playing overwatch and suddenly I get disconnected and i couldnt reconnect so i decided to restart my computer and ever since the connection to my router from my computer completely doesnt work, I use a PoE kit and it is not a problem with the PoE kit, Ethernet cable or my port, i tried uninstalling the drivers and updating them but nothing seems to work for some reason and Windows troubleshooter cannot identify a problem, if someone could help me with this issue that would be great

My Specs:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 16325 Mb
Graphics Card: AMD Radeon HD 7800 Series, -2048 Mb
Hard Drives: C: Total - 227919 MB, Free - 52510 MB; D: Total - 953739 MB, Free - 470822 MB;
Motherboard: ASUSTeK COMPUTER INC., Z97-K
Antivirus: Windows Defender, Enabled
 

A:Ethernet Connection not working

Read other 9 answers
RELEVANCY SCORE 40

I recently had a hard drive failure. After installing a new internal hard drive, formatting and installing XP Home/SP2, I reinstalled all my back up files and tweaks etc. All is lean, mean and secure. However, when I was checking my Device Manager, I noticed the yellow ? next to my Ethernet Controller, which explains why I had to reconnect to my DSL through a USB connection instead of my previous ethernet connection.

In my Ethernet Controller Properties, under the General Tab, it reads as follows:

Device Type: Other Devices
Manufacturer: Unknown
Location: PCl Bus 2, Device 8, Function 0

Under the device status states, "Drivers for this device are not installed (code 28). I tried to reinstall the drivers through the Hardware Update Wizard, but it failed and stated, "Hardware was not installed because the wizard cannot find the necessary software.

I have an Intel Pro 100 M Integrated PCI NIC Card.

Thank you in advance for any for any guidance on this.
 

A:Ethernet Connection Not Working

did you instal the correct drivers for the device?? - where are you getting them from?
you could delete from device manager and then wait for windows to find and then point to the correct drivers

have you installed your motherboard drivers ??

video drivers
sound drivers

often need installing - with the correct manufactureres drivers
 

Read other 1 answers
RELEVANCY SCORE 40

i am using laptop and run windows xp pro i have been using usb connection but wanted to change over to ethrtnet but it wont let me connect with ethernet in my device manager checked afew things but said allws working properly and could find no better drivers than the ones installed every time i try ethernet connection i get little buble botom right hand corner saying cable not connected but it was also in device manager i have a yellow ? mark by the side of it it says pci communications controller i am totally lost as what else to try can u help me dbbie
 

A:ethernet conection not working

Have you disabled your onboard NIC?
 

Read other 2 answers
RELEVANCY SCORE 40

Ethernet cable is new, XFinity modem plugged into is working , "device manager' shows 3 gigabyte network connections (and I know I only have one) : Intel(R) 82567LF gigabyte connection
Intel(R) 82567LF gigabyte connection 2
Intel(R) 82579LM gigabyte connection

??????
the Intel(R) 82567LF gigabyte connection 2 says (in "properties") :"windows found driver software for your device but encountered an error while attempting to install it"

"......windows cannot load the drivers for this device (code 31) " ????

same for Intel(R) 82567LF gigabyte connection

and Intel(R) 82579LM gigabyte connection says all is "...installed correctly" ? but no Ethernet connection, wireless only.

Tried re-naming Ethernet from "unknown" to "Local Area Connection" and computer said..."cannot use because that name is already being used" ? yet nowhere do I see any other 'local area connection' ?
 

A:Ethernet Connection Not Working

Try disabling the wifi and see if it'll connect. If not. Then download latest drivers for wired network card. Remove any software related to the wired network card, then uninstall via device manager. Say yes if it asks to delete drivers. Reboot and reinstall.
 

Read other 1 answers
RELEVANCY SCORE 40

I recently bought a netgear router. The problem is, that it will not connect to my laptop. I believe that the main reason why is not connecting is because my ethernet cable is not working properly. For example, when I try to connect my modem to my laptop via ethernet, it will notice it but it will tell me that it is an unidentified network. For this reason I have to use my usb cable which is working fine. I think this is really weird because if the ethernet calbe wouldnt be working my laptop wouldnt even notice it. I tried downloading some ether drivers but I still cannot conect.... this is the version of my ethernet thing marvell yukon 88e8039 pci-e fast ethernet controller.

Please let me know what can I do.
 

A:ethernet connection not working....

First off, how about the EXACT make/model of the modem and the router. You do realize that when you change from the USB connection to the Ethernet connection on most modems that you MUST cycle power on the modem, right?
 

Read other 1 answers