Over 1 million tech questions and answers.

XP Install Disc Shows as Audio Disc

Q: XP Install Disc Shows as Audio Disc

I want to do a clean install of Windows, but either I will get the message: ""this request could not be performed because of an i/o device error." or the XP Install Disc shows as a CDA audio disc with one track.

I never get the option to boot from the disc when I startup the computer. The disc works fine in other computers.

I have a Plextor 708a DVD+-R drive. And an odd thing is that in the Device manager it shows as a "PHEXTKR DRDR PX)708A". I have tried to uninstall and reinstall the drivers for the DVD drive, but it comes up the same way.

RELEVANCY SCORE 200
Preferred Solution: XP Install Disc Shows as Audio Disc

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: XP Install Disc Shows as Audio Disc

Quote:





Originally Posted by mikeydangerous


I want to do a clean install of Windows, but either I will get the message: ""this request could not be performed because of an i/o device error." or the XP Install Disc shows as a CDA audio disc with one track.

I never get the option to boot from the disc when I startup the computer. The disc works fine in other computers.

I have a Plextor 708a DVD+-R drive. And an odd thing is that in the Device manager it shows as a "PHEXTKR DRDR PX)708A". I have tried to uninstall and reinstall the drivers for the DVD drive, but it comes up the same way.




have you tested another copy of the cd?

also this :""this request could not be performed because of an i/o device error." is a issue means the cd rom is almost out the door.

change bus ccables and test again, if that fails test another cd rom ( you can buy them for like 20$ )

might be worth it....

thanks
Wolf~

Read other 1 answers
RELEVANCY SCORE 85.2

Hello world!

I just got a new laptop with Win7 64 bit home premium and that's all good that this
OS came installed on there and I'm using it, but for my teaching activities I'll need
to get into some Linux OS in a multiboot configuration. So I will want to eventually
need to be able to fix this when the HD fails, well because we know that ALL HDs
will eventually fail, right? So this is a 'remanufactured' ASUS K55A, and the one piece
of paper that came with it says the HD has been reformatted and there is no recovery
partition so I should promptly make up a recovery DVD set, which I did (4 DVDs).

So I used the disk management to shrink the C: down to it's minimum, like 150Gb, due
to what it said was some files that could not be moved. That's probably OK. Then I
deleted the D: and made a new D: of about 350Gb which leaves the unassigned space
all looking to be contiguous (like 188Gb). In looking on there, I see the UEFI partition
of 200Mb, which is cool, and then there are these two mysterious partitions: a 25Gb
recovery partition with no listing of it's filesystem nor any drive letter, hanging out in
the never never land and not in the early (leftmost) part of the disc, and there is this
protected Q: drive that apparently has MS office on it 'in case' I want to buy it. There
is the 'reduced with ads' MS office already working and that is all I would ever want.

1) In reading up I see there is a lot of headache going around with Win 8 and UEFI but
I believe that UEFI is a goo... Read more

A:Questions: UEFI, restore partition, Q:, install disc, recovery disc

Hi PJ,

You covered several areas, so I'll start with some suggestions:

1. Since you already burnt (and checked?) the recovery DVD's, that recovery partition is no longer required, so you can remove it. Everything you need to restore the computer back to its factory state will be contained on those 4 x DVD's - store them safely.

2. For the Linux distro's, given that this is a UEFI boot, I would run them in a virtual machine using either free VirtualBox or free VMWarePlayer (my personal preference is for the latter).
Linux - Install on Windows 7 Virtual Machine using VirtualBox

3. If you never plan on using Office, uninstall it, then remove the Q: partition.

You should also consider a clean OEM install at some point - it gets rid of all the bloatware that the OEM's come with:
Clean Reinstall - Factory OEM Windows 7

Lastly, keep this handy if you choose to clean install under UEFI:
UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with

Regards,
Golden

Read other 7 answers
RELEVANCY SCORE 84.8

im stuck on what to do. i have been without an os for 3 days now. i am currently using my playstation 3 which is no good i want my vista back. so when i go to install it gives me the error " windows cannot be installed to this disc. the selected disc is of the gpt partition style". i have followed some instructions to diskpart. but after ive seletced my disk and i press enter then type clean and press enter, i dont actually know if it has done anything or doing anything. i cant type anything else after that as it says to type exit in the instructions after typing clean, but it simply wont let my type it. so im hoping someone can shed some light on to this problem for me as ive been stuck for 3 days now and i really am at my last teather with this machine its about to be thrown out the window.

A:windows cannot install to disc the selected disc is gpt partition style

download gparted and then format your disc. or download linux and format your disc

Read other 1 answers
RELEVANCY SCORE 84.8

How do I make a Window 7 x64 Ultimate Install Disk using my Windows x64 Pro Disk? I read somewhere that the four versions of Windows 7 x64 (Starter, Home, Pro and Ultimate) are all on the Setup DVD you buy, the difference is only in the Setup.ins and boot pictures?

I want to make a Slip-streamed Setup DVD for Ultimate. How? Thanks, Donald

A:Make Window 7 x64 Ultimate Install Disc using Windows x64 Pro Disc

Windows 7 Universal Installation Disc - Create

Read other 2 answers
RELEVANCY SCORE 84

I have a problem trying to set up raid 1. I have a new PC with W7 Pro 64 bit installed and have migrated everything off the old failing desktop. Everything works well and W7 has no problem booting. I can take W7 image dumps as well. Somewhere in the process of setting up RAID I have done something that does not allow me to complete the process. I decided to use the Install Disk and do a startup repair to clear things, but for some reason neither the Install Disc or the W7 System Repair disc find a system to repair yet my system boots properly.
I've read that I can image dump the whole thing, enter BIOS and setup Raid 1 properly and then restore the image. The proper drivers for RAID were loaded. Can someone tell me if this process would work? Thanks in advance for any help.

A:Neither W7 install disc or W7 repair disc find my new system

Win7 doesn't much like dated RAID technology, and doesn't need it with built-in drive imaging.

If you wanted to RAID your new PC you'd have reimage or reinstall anyway.

Clean Reinstall - Factory OEM Windows 7
Macrium - Image your system

Read other 9 answers
RELEVANCY SCORE 82.4

Hello,

I want to completely wipe my HDD (format it externally with an IDE enclosure) and restore Vista Home premium with my manufacturer's restore DVD. Will this work or do I actually need an official vista installation disc?

Thanks.

A:Is there a difference between install disc and restore disc?

You manufacturer's restore disc will revert your computer back to the way it was when you bought it. I.E the way it was when you pulled it out of the box. This includes any preloaded software or what have you.

The Vista disc will allow you to reinstall WindowsVista ALONE! with no accessories or anthing else.

Hope that helps :)

Read other 6 answers
RELEVANCY SCORE 80.4

I Need a Sound Blaster X-Fi Xtreme Audio install disc I have lost mine and it has some apps on it that I need that for whatever reason can't be downloaded for the website so if anyone has one could you please make an iso and upload it somewhere. : )
 

Read other answers
RELEVANCY SCORE 79.6

Hi guys,

A while back I backed up my XP disc (rather badly) by copying all of the files to a storage drive. I've since lost the disc, and am trying to recreate the disc so I can do a fresh install. However, the disc isn't being recognised just after BIOS is (when I boot up the computer).

I have Ashampoo Burning Studio, and I can choose a file that will be executed automatically after BIOS. Which file is executed normally when you put your XP disc in (and have the boot priority set to CD-ROM in BIOS)? If this won't work, is there a program I can get that will burn the disc so it is recognised and boots to the install screen when I boot up?

Thanks for your help, and I hope that makes sense (I'm not sure on how to explain it exactly).
Kallak

EDIT: Sorry if a similar question has been posted elsewhere, I did a search and couldn't find one.

EDIT: I could try and reword this if it doesn't make sense, just drop a reply - cheers.
 

A:XP Disc won't install - disc won't autorun

Read other 14 answers
RELEVANCY SCORE 78.8

Working on a spiffy e-machine with Windows Vista Home Basic that runs pretty well.

After reading multiple posts where the advice usually begins with suggesting a 'boot disc' or a 'recovery disc', I guess what I'm looking to find out is:
1) what is the difference between a boot disc and a recovery disc?
2) How do I go about making one on this machine (or if I even can)? << I did read through Grinler's tutorials regarding System Restore points and all that seems to in good order. But I guess I'm not sure on the relationship between that and my post (or if there even is one).
3) a best practice regarding these type of discs
I don't have any pressing issues at this time, but I also don't want to wait until I do.

Everything I've learned here at BC has been so great & helpful, I would like to stay on that path, so any links/apps/ideas/suggestions and/or insights would be greatly appreciated.
Winterland

A:Boot Disc, Recovery Disc, Frisbee Disc

1) what is the difference between a boot disc and a recovery disc?Boot disk vs recovery disk. Let me see if I can phrase that in a way that makes some sense.A recovery disc is a generic term for the disk or media containing a backup of the original factory condition or a specified condition of a computer as configured by the original equipment manufacturer or an end-user. OEM supplied recovery media is sometimes shipped with some computers to allow the user to reformat the hard drive and reinstall the operating system and pre-loaded software as it was when it was shipped. This is not as common a practice today as it was in the past. I won't confuse the issue, but google recovery partition for more information.A boot disk is a removable data storage medium, i.e. DVD or flash drive from which a computer can load and run 'boot' an operating system or utility program. The computer must have an installed program or application which will load and execute a program or application from the boot disk. This will enable you to boot an otherwise unusable machine to be able to troubleshoot the OS or non-working application as necessary.Hope that gives you a better idea of the difference.As to how to create a boot disk? I will let more knowledgeable staff or members assist you.

Read other 8 answers
RELEVANCY SCORE 78.8

Working on a spiffy e-machine with Windows Vista Home Basic that runs pretty well.
After reading multiple posts where the advice usually begins with suggesting a 'boot disc' or a 'recovery disc', I guess what I'm looking to find out is:
1) what is the difference between a boot disc and a recovery disc?
2) How do I go about making one on this machine (or if I even can)? << I did read through Grinler's tutorials regarding System Restore points and all that seems to in good order. But I guess I'm not sure on the relationship between that and my post (or if there even is one).
3) a best practice regarding these type of discs
I don't have any pressing issues at this time, but I also don't want to wait until I do.
Everything I've learned here at BC has been so great & helpful, I would like to stay on that path, so any links/apps/ideas/suggestions and/or insights would be greatly appreciated.
Winterland

A:Boot Disc, Recovery Disc, Frisbee Disc

1) what is the difference between a boot disc and a recovery disc?

Read other 10 answers
RELEVANCY SCORE 73.2

Hi folks,

Would really appreciate your assistance here.

I have been sent four interviews in .mp4 format on a DVD-RW disc. When I put it into my laptop it says it's a blank disc, however the guy has assured me he burned the videos on there. Then when I put it in my partner's PS3 it says 'data disc' then when I click on that I can see the four interviews, then when I try to click on one of them it says 'There are no images.'

So the interviews are definitely there, yet my laptop keeps telling me it's a blank disc.

Does anyone know why my laptop doesn't recognise them and what I can do to retrieve these videos?

Here's my tech info:

Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 2804 Mb
Graphics Card: Intel(R) HD Graphics, 1274 Mb
Hard Drives: C: Total - 292143 MB, Free - 247653 MB;
Motherboard: Packard Bell , EasyNote TX86 , V1.07

Best,

Janis
 

A:MP4s Shows as Blank Disc

You probably just need the proper codec (coder/decoder).
The DIVX player will install those codecs and some others not
natively supported by windows.
Also comes with the player.
Might try it,it's a free download.
http://www.divx.com/
 

Read other 1 answers
RELEVANCY SCORE 72.4

Just did some reinstalling of hdds.

The Disc # 4 (dvd duplicates) appears in Disc Mgmt,Acronis Drive Monitor and Minitool Partition Wizard, but NOT in My Computer.

Thanks for any help.
 

A:Solved: Hdd shows in disc mgmt - not my computer

Discpart showing the HDD as offline, but not in Disc Mgmt or BIOS.
 

Read other 2 answers
RELEVANCY SCORE 72.4

Hi all,

A friend of mine is trying to burn some songs that he has downloaded, to CD. I am unsure (and he doesn’t know how to check) which Nero he is using. He has told me that he goes to: AUDIO CD, and adds the songs that he wants. Once it has been completed, it says that it has burned successfully. He then tries to play it on his stereo and nothing happens, he puts the disc back into the computer drive and it says the disc is empty.

Could this be an incompatible disc problem, or maybe the songs he’s downloaded may be ones (like itunes) where you can’t burn them to disc.

If anyone has any ideas, please let me know.

Thanks in advance.
 

A:Nero CD burning shows empty disc

In Nero Burning ROM, the Help / About Nero ... menu selection should show a screen with the detailed version number.

I believe one of the options in Nero is to run a simulated burn test without actually burning to the CD. Make sure that box is not checked. Not sure if a "Burn Successful" message shows up at the end of the test.

Can your friend hear the CD-ROM drive spin up when the burning starts? Are there any activity lights on the drive to indicate burning in progress?

One of the options when starting a burn is to verify the CD contents right after burning is completed. What happens if that box is checked?

Has this version of Nero ever worked to burn any type of audio or data CD on this drive?
 

Read other 2 answers
RELEVANCY SCORE 72.4

I have a client who was haing issues with firefox. yesterday he attempted a system restore on his Lenovo k410 (win 8 64bit) desktop (without my blessing). it then got stuck in the infamous windows repair loop. the lenovo screen starts then it says attempting repairs, screen goes black and then it briefly flashes "Your PC ran into a problem and needs to restart. We're just collect info, and then we'll restart for you".

Well I assumed (and google told me) I need to enter advanced startup options. the problem is nothing I do will get me there!

I've tried to boot to a retail iso just to do a repair install. I've also tried to boot to win 8 repair media created on my win 8 machine (both x64). when attempting to boot with either one the win 8 blue square "Your PC ran into a problem and needs to restart. We're just collect info, and then we'll restart for you" and then it gets stuck. it then returns to the original screen, rinse and repeat.

and no luck getting into safemode!

I've found many folks with the similar issues and the only answers revolve around getting into advanced start up options. obviously I can't do it via windows and again I'm unable to boot properly from repair disc (cd or usb) or retail iso.

once at the clients house I was able to hit f2 to get to lenovo's one key rescue. I did not start it because I had not yet backed their data up. I booted to ubuntu and got the data off. now I am unable to even get to the f2 options!... Read more

A:stuck in "repair" loop, can't boot to repair disc or install disc...

Run Seatools long test. Remove all but one stick of RAM and run Memtest on each stick of RAM separately. If you get any errors (Red) that stick is bad and needs to be replaced. Tell us how you get along.

Read other 4 answers
RELEVANCY SCORE 72

hi every one

i'm sorry if my topic is not in the wright department

and sorry again

my Problem is

i have tow hard disc and need ti instal 2 windows copy
in ech one of them
but the big problem is

i want when the pc startup founde in bios screen
2 choice
1st : xp
2nd : 7
and choose what i want to log in

this problem is making me soooooo crazy for 3 days and
finally i found a solution for it
but it is so poor
i remove one hard disc and instal the windows
and did the same for the second hard disc

but cause Moore time and hard to start my work
soo plzzzzzz
i just need someone help me and be Patient with me


your's
KOORY

A:install windows 7 in hard disc and XP in another hard disc in same pc

See this tutorial for how to setup a dual boot environment with Windows 7 and XP. It covers both methods, XP installed first or Windows 7 installed first.

Read other 4 answers
RELEVANCY SCORE 71.6

Hi, I have a SAMSUNG CDRW/DVD, Win XP Pros, the driver is recognized in MyComputer as Removable Disc, and it is not listed in device manager, it is recognized in the BIOS, I tried unplugging and replugging and also tried running Add New H/W Wizard, but it not recognizing the drive. Please help me.
 

A:CDRW/DVD problem, shows as Removable Disc in My Computer,

if this is a new drive the most likely cause of the problem is that the jumper is not properly set. if it is alone on the ide cable then it should be jumpered as master. ( most DVDRW's come with the jumper set to master) if it is on the cable with another drive then one drive must be set to master adn one to slave.
 

Read other 3 answers
RELEVANCY SCORE 71.2

I have found a plethora of advice on how to do it. They all say to insert a blank DVD, but nowhere can I find anything about size of disc or how to determine size in individual cases. Also, specific recommendations for disc (I have never burned a disc)?

Windows 7 Home Premium 64-bit

I plan to use an exterior HD for system image.
 

A:Solved: Create system repair disc. Disc size?

Read other 8 answers
RELEVANCY SCORE 71.2

Hi All,
I know this is 'against the rules' as I have posted this in another section as well but I got no replies so thought I would try this instead.

I have a toshiba satellite L750 running Windows 7 home premium, when trying to burn anything onto a blank disc I get as far as selecting my items and asking it to burn but it keeps telling me to insert a blank disc (which obviously I have). I have tried several different types of blank disc but it dosnt seem to recognise any of them.

Would be very greatful if someone could help.

Many thanks in advance!

A:Burning content - disc drive not recognising blank disc

Hmmm tricky are you sure they are blank? your drive also may need a firmware update.

Read other 2 answers
RELEVANCY SCORE 71.2

I've spent hours and hours trying to fix it, and have found nothing really worthwhile online. I'm coming here in the outside chance someone else may have experienced something similar.

Basically, my Windows 7 laptop will no longer allow me to play dvd/cds (burned or store bought). The drive shows up in My Computer, is enabled, bios look good, etc, etc, but if I put a disc in it never autoruns or shows up with the disc name in My Computer,
and if I double click the disc drive I get a "please insert disc" dialogue box and the drive door pops open. I've tried absolutely everything I can think of, and (for what it's worth) I don't think its a hardware issue because after I sent my computer off
to Samsung for this same repair it came back completely reformatted the disc drive worked for a second. Then I started getting rid of some of the bloat ware in here (bought it at best buy... big mistake) again, and it shut down.


Here's what I've done or tried so far:
- Uninstall, reinstall the drive
- Updated the drivers
- Updated dvd/cd drive firmware
- Ran Microsoft's "Fix it" utility
- Cleaned the lenses/laser
- Remapped the drive to a different letter/path
- Checked registry to ensure filters weren't an issue (the upper and lower)
- Restored the laptop back to just after I received it back from the Samsung repair people (didn't work)
- Undid the restore
- Checked BIOS (I'm by no means BIOS-savvy, but it appeared that everything was in line with ... Read more

A:DVD/CD Disc Drive Installed, But Doesn't Recognize Disc In Tray

You could try a system recovery back to factory specs. Here is a link to show you how.
http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx=149520&modelname=&modelcode=&session_id=P1DDpTBkyfLnGygkJJrp71DVF33RGYnkhGyyzQH1qrvVMnYZvC22!-581493343!1005328399!1337918275957

Read other 11 answers
RELEVANCY SCORE 70.4

After MUCH searching, I've yet to find info on this issue. Many similar, but nothing specific. Please bare with me if this is a known/solved issue.

Okay, old C drive was failing, so I decided on a new OS copy and new HDD. Bought an OEM Win 7 Home Premium 64, and installed.

Little did I know, but I should have had only one HDD hooked up!!! When I installed Win 7, I had 2 HDD's installed, and as a result, Windows installed the main files on my C drive as desired, but put the boot (MBR?) on my other HDD, F drive. Now I have 2 physical HDD's that are listed as Windows drives. So when I went to do a system image backup, all that came up was my DVD burner as a save location. My secondary HDD (F drive) was not shown. Now I know why!

Currently...

Disc 0 - (Boot, Page File, Crash Dump, Primary)
Disc 1 - (System, Active, Primary) Also shows this as having unallocated space of 9MB.

I want ALL of Windows on my main C drive.

How can I fix this without having to re-install all programs etc on my C drive?

Can I do a repair of some type?

Could I install a 3rd internal/external HDD and use that to do a system image backup, then shut down, disconnect F drive, then do a system restore/repair using the OEM installation disc?

Any ideas/fixes?

A:Win 7 installed boot on Disc 1 and system on Disc 0 separate HDD's

Yeah, by having that other drive connected, you now have your boot files on the old drive and the rest of Windows on the new drive.

Post a screen shot of Windows Disk Management.

Normally, you'd want C to be disc 0, but that isn't critical.

You can fix this by using EasyBCD to copy your boot files from the old drive to the new. I think there is a tutorial on this site on how to do that.

Edit: here's the tutorial;

Bootmgr - Move to C:\ with EasyBCD

Probably can also fix it by disconnecting the old drive and then running startup repair multiple times, using your Windows installation disc.

Post the screen shot to confirm what's going on.

Read other 8 answers
RELEVANCY SCORE 70.4

Is there somewhere to request the disc? Msg.   Secure boot violation

Read other answers
RELEVANCY SCORE 70.4

Hi folks - hope someone can help.
I'm running XP Home on a Sony VAIO. The PC has a partitioned HD: C (main), & D (storage). I defrag every night.
This evening, I got the dreaded "not enough disc space to complete disc defragmenter" message. Suddenly tonight I'm showing only 2% free space on drive C. I went in and changed my System Restore percentage from 12% to 6%. Now I'm showing 6% free space (but still can't defrag).
I shouldn't have had to change my System Restore percentage tho. I'm sure that's not the culprit. Up until last night the C drive was nowhere near this full. Something's there tonight that wasn't yesterday. ...A whole LOT of something. The Defrag graph is showing a nearly FULL C drive with a LOT of red "fragmented" files"
I've been doing a bit of downloading, but after it's on the desktop (part of C), I move it to the D storage drive (which has a LOT of free space remaining).
Something's fishy. I'm no expert, but I'm thinking I need to find some type of application to tell me what's suddenly on that drive taking up all this space. Anyone have any helpful suggestions?...
 

A:not enough disc space to complete disc defragmenter: something's fishy here

Read other 16 answers
RELEVANCY SCORE 70.4

My local disc drive C disappeared from My Computer and also the secondary drives wont show I haven't installed any new software or anything, I haven't looked at them for about a week and then I saw that they were gone

Read other answers
RELEVANCY SCORE 70.4

I have to be the most unfortunate person when it comes to DVD burning. Im using Nero Express 6 and a LiteOn Burner. I tried twice and I got an illegal disc error, as you can see towards the end of the ff. report : Earlier today, I used a DVD +R disc and was successful. Any ideas???

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.26 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 2 TA 0 - 6.3.1.26
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CDRW/DVD GCC4244>Version: B101 - HA 1 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HTS541060G9SA00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CDRW/DVD GCC4244 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CDRW/DVD GCC424 D: CDRom0
LITE-ON DVDRW SOHW-1693S E: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1014MB (1038712kB)
Free physical memory: 384MB (393344kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.7.2006
DVD-Copy on the fly
5:55:35 PM #1 Text 0 File Reader.cpp, Line 126
Reader running

5:55:3... Read more

A:Solved: Error burning a DVD -R disc : Illegal Disc

Read other 13 answers
RELEVANCY SCORE 70.4

Hey guys, I am having somewhat of an issue with my disc partitions after backing-up data and reinstalling windows 7-64bit.

I have included a picture to help explain.

Here's the issue, my PC had a virus I was unable to resolve. I took it to an "expert" to see what he could do. He backed-up my data and re-installed windows 7. The problem is that I had a disc partition set up with my OS and program files on a C: partition, and a partition, D:, labeled DATA, for all of my data etc..

I'm not sure exactly what he did but it looks like he reinstalled windows to the DATA drive instead of the OS C: drive. Now making the DATA drive, effectively the C drive (and Boot, Page File, Crash Dump, Logical Drive). It looks like after restoring the backed-up data the original install of windows was also restored to the Old C: drive (now named D), this partition is also the System and active Partition.
See picture:

So does this mean that windows is booting from the DATA (C) drive now but running the original install of windows 7-64bit from the OS(D) drive (old C)?

I have been reading over a lot of forum posts and I'm not really sure what to do here. I understand I can only extend a drive to unallocated space that is shown to the right in the disc manager. I have thought about backing everything up on DATA(C) and extending OS(D) into it, but I am concerned that I will not be able to boot since DATA(C) is now the boot disc. I do not have a windows recovery or boot disc. ... Read more

A:Disc parition issue, want System and Boot to be same disc

  
Quote: Originally Posted by Garrett7


Hey guys, I am having somewhat of an issue with my disc partitions after backing-up data and reinstalling windows 7-64bit.

I have included a picture to help explain.

Here's the issue, my main PC had a virus I was unable to resolve. I took it to an "expert" to see what he could do. He backed-up my data and re-installed windows 7. The problem is that I had a disc partition set up with my OS and program files on a C: partition, and a partition, D:, labeled DATA, for all of my data etc..

I'm not sure exactly what he did but it looks like he reinstalled windows to the DATA drive instead of the OS C: drive. Now making the DATA drive, effectively the C drive (and Boot, Page File, Crash Dump, Logical Drive). It looks like after restoring the backed-up data the original install of windows was also restored to the Old C: drive (now named D), this partition is also the System and active Partition.
See picture:

So does this mean that windows is booting from the DATA (C) drive now but running the original install of windows 7-64bit from the OS(D) drive (old C)?

I have been reading over a lot of forum posts and I'm not really sure what to do here. I understand I can only extend a drive to unallocated space that is shown to the right in the disc manager. I have thought about backing everything up on DATA(C) and extending OS(D) into it, but I am concerned that I will not be able to boot since DATA... Read more

Read other 8 answers
RELEVANCY SCORE 70.4

Please help 'disc read disc error occurred' on start up and I cannot get XP to start,I have put a recovery disc in and got to the dos menu started scandisc seems to be taking for ever (5% in 3hours).can I recover my doc's for my University course:help anyone
Thanks for looking
Tone

Read other answers
RELEVANCY SCORE 70.4

Hi,

I'm a newbie here, and am hoping somebody can help with this issue. I have a hp pavillion dv6000 laptop with vista 64, and a built-in cd/dvd burner. Recently, no matter what software I use to burn discs(data, audio, mp3 etc) the process completes normally, but the disc remains blank. I've looked all over the forums, and searched google for answers as well, but came up with - pardon the pun - a blank. Any help would be much appreciated. Thank you in advance.

Cheers,
whydoesmycomputerhateme
 

A:CD/DVD writer seemingly burns disc, but disc is still blank

Read other 6 answers
RELEVANCY SCORE 70.4

So I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference). I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.

Anyone got any ideas how to fix this problem? Or I guess another way to ask, how do I get the computer to look for the boot manager on the hard drive and not in the disc drive?

EDIT: Also sorry if this is in the wrong section, I didn't really see a section that fit this problem, but if there is a better section for it, could a moderator please move it.

A:Boot Manager missing when no disc in disc drive

Hello Thamorian, and welcome to Seven Forums.

You might see if running a startup repair may be able to help.

Bootmgr is missing - Fix

Hope this helps,
Shawn

Read other 1 answers
RELEVANCY SCORE 70.4

Ok.. Well, I bought Final Fantasy IX (11) for my PC. The game disc reads only on PC-DVD-ROM Software. I don't know if I have the right kind, this is what disc drive I have

HL-DT-ST RW/DVD GCC-4320B

Is that the correct one?
 

A:Disc drive wont read my game disc.

Looks like the right kind... It might be worn out
 

Read other 11 answers
RELEVANCY SCORE 70.4

New HD on the way but DVD drive on functioning computer not working. Will I have to download Win7 to disc or flash drive to install on new HD? I do have the product code.

A:HD crash, no recovery disc, have product code. Do I have to have disc

Hello docmac7672

Check out the Tutorial below for making USB Install





USB Windows 7 Installation Key Drive - Create


Iso http://www.mydigitallife.info/offici...digital-river/

Read other 6 answers
RELEVANCY SCORE 70.4

Hello.I have been trying come up with a solution for this issue for awhile and am at my wits end.After upgrading my PC:http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03685096...to Windows 10 a few months ago, my PC will randomly not boot (more often than not) and I will receive the following error message upon booting:Error: No boot disc has been detected or the disc has failed.I then have to manually shut down the PC.When I select F10 upon booting and enter through the bios and simply select "ignore changes and exit" the PC will then load normally.It happens seemingly at random. Sometimes I can restart the PC a couple times in a row without issues. Typically I have to go through the bios though and I avoid powering down the PC at all if I can.I have done numerous tests on the hard disks and they have all passed. I have checked the connections from the HD to the motherboard and there are no issues there. I flashed the bios to the newest version as well. I tried downgrading as well as refreshing Windows to no avail.Help?Thank you in advance.

Read other answers
RELEVANCY SCORE 70.4

 Is there somewhere to request the disc? Msg.   Secure boot violation

Read other answers
RELEVANCY SCORE 70.4

hi, my friend gave me his old VAIO, cause my computer was shot.
It has a pentium 2 in it and 233MHz(66x3.5),sometimews it says(266mhz(66x4.0)) with 512mb Ram. It origionally had a 2gig hard drive with windows xp prof. on it. the hd kept on filling up almost immediatly so I put my 80gig(westernDigital Caviar-100mbps-7200rpm)hard drive in it as the slave to beef it up.
What i origionally wanted to do was leave the 2gig in with only the operating system in it and use my 80gig for everything else,(completely bypass the 2gig.) But could not figure that out. If that is even possible I would still like to do that.
Now I have formatted my 80 gig hd, and the comp no longer has the 2gig drive in it. I have the jumper set to master(80GIG), with the master ide line in it. I have a win xp home disk, and I want to install it to the 80gig drive. my cd rom is working as well as the hard drive. (as seen in windows with the 2gig drive). I changed the First boot device to the cd-rom in the advanced BIOS features.
(second boot device:HDD-0
Third boot device:LS/ZIP
Boot other device Enabled, Everything But first boot is default.)
When comp starts up it goes to the memory test screen and reads my 80gig hd fine, then: PRIMARY HARD DISC FAIL. Or sometimes: Cpuis inworkable or has been changed, check cpusoft menu.
I press F1 to continue: blah blah verifying Dmi pool data....
Disk boot failure, insert system disc and press enter. I press enter and goes to blank screen the s... Read more

A:disc boot failure, disc is in, still wont work. need help.

Welcome to TSF

Doesn't seem to be booting to the cd rom, try tapping the F12 key to boot from the optical drive in order to install windows.

Read other 3 answers
RELEVANCY SCORE 70.4

Okay, So my roomate's laptop which is on Windows XP Proffessional started acting funny. Yes it does have Service Pack 3

It seemed like a problem that could be fixed with a Defrag, but Defrag wouldnt work.

So I tried Disc Check and it didnt work.

For the heck of it, I tried Disc Cleanup, and it freezes instantly and doesnt work.

It would be easy enough to fix if there was a restore point in System Restore, but for some reason that program hasnt made any restore points. ( go figure)

I have been working on this computer, trying every defrag and disk check fix I could find. Including all the command prompts, regsver32, installing new components, everything. Still no go.

More specifially, for defrag my error is: "Disc Defragmenter could not start"
It doesnt work when defrag c: is entered into Command Prompt.

I finnally got disc Check to respond by using command prompt and telling it to schedule a check for the next start up, but it didnt work. When the computer starts up I get a error like "Disc check cannot be used on RAW files" for a split second.

Starting the computer in safe mode doesnt make them work either.

Is there anything else I can do? Or do I just have to wipe everything and re-install the OS?

Thanks!

A:Defrag, Disc Check, Disc Clean up all not working

and welcome to the Forum


I would first run diagnostics on the hard drive ( click here )

Read other 6 answers
RELEVANCY SCORE 69.2

I think I may have found an answer to my boot problem. After reading the tutorial on system image restore I saw this statement.

"You can fool it into thinking that simply by marking the 7 partition as active.

May be as well to make it a "secondary" system partition , by copying across the relevant files - in case you forget to hand the active flag back"

How would I be able to make my "C" WIN7 drive my system drive instead of my "D" Vista drive. Right now my "D" Vista is my system drive.
Or, can I have two system drives at the same time? Remember these are on TWO SEPERATE hard drives.

A:How to make a hard disc a system disc

First make sure you are set to see hidden and protected files in Windows Explorer.

Copy bootmgr file from D: to C:
Copy boot folder from D: to C: and tell it to skip over copying bcd and bcd.log when it prompts.

Run this command from an elevated command prompt. You may copy and paste into it. Hit enter.

bcdedit /export C:\boot\bcd

Reboot into bios and change the primary boot device to be your C: drive.

Boot to Windows and make sure C: is now the system drive. If so, you may delete the boot folder and bootmgr file on D:

If you want two "system drives" so in case one fails you'll be able to boot from the other, don't delete anything and use bios to change drives in this instance.

Read other 4 answers
RELEVANCY SCORE 69.2

For the first week or two using windaow 7 on my new computer, a little balloon regularly poped up saying do you want to make a recovery disc, if so you will need 3 dvd's, anyway, i want to do this now but the balloon doesnt ask me anymore, so I did as follows,

•In Control Panel, click System and Security, and then click Backup and Restore
•In the left pane, click Create a system recovery disk
•Insert a blank CD in the DVD, and then click Create Disk

But this only took 1 dvd, not three like it originaly told me, have I done the right think, or is there another way I can create one using the 3 dvd's?
 

A:is a recovery disc and repair disc the same thing?

It sounds like you made a "System Repair Disk." This will let you make some repairs for which you would normally use an installation DVD--for example, repairing the boot manager as I did yesterday. Also, if you "create a system image" and some day find your hard drive is trashed you can boot to the System Repair Disk and re-image the hard drive from your saved system image. Personally I use Macrium Reflect Free for this, as I don't quite trust that Microsoft got this right their first try.

You can use the Recovery partition to "recover" your system to the way it was when you first turned it on. That is, as long as the special boot manager is not damaged and the hard drive is not inoperable. So, it's best to make your one legal set of Recovery disks--the 3 DVDs required for Windows 7. You may think that you will do the system image mentioned above and not need this, but it's cheap insurance to make the DVDs. If and when you decide to sell, gift or donate the computer it would be good to 'Recover" it to factory defaults and hand the new owner the Recovery disks.

This feature--to create the 3 DVD Recovery set--will probably be "hidden" in some of the stuff your laptop manufacturer installed, and probably not found through Control Panel.

You may have some sketchy paper documentation with this info, or can find it on the manufacturer's web site, or if you tell us the brand somebody may have the answer.
 

Read other 3 answers
RELEVANCY SCORE 69.2

I video taped a wedding and created a movie on iMovie on my Mac computer. I then tried to export it onto a DVD+R and my DVD player gave me the message: Disc Error, The Playback Feature may not be available on this disc, Press OK to eject the disc. I then called apple they told me to get an app to create a DVD. I got 1DVD Creator and put my movie on it and then tried to put it onto the DVD+R and it did the same thing. When It came off of iMovie it was exported as a MPEG-4. Please help me I need to get this movie to the customer ASAP. Thanks for all of your help!
 

A:Disc Error, The Playback Feature may not be available on this disc...

I don't use a Mac, but the output should not be mp4. In the tool, select create video DVD or export as video DVD.

You should see two folders created, audio_ts and video_ts.

See here: http://www.videohelp.com/dvd
 

Read other 1 answers
RELEVANCY SCORE 69.2

HELLO FRIENDS , i am facing issue regarding not able to boot from recovery disc provided HP dealer while purchasing .Since i had formated my PC  now i am trying to recover it through disc but actually disc no 5 is coming out of drive .Even i had made new Copy of that disc from nero software .Please help me to recover my licence OS and from where i will get my Original OS back now since i do not have Original cd provided by dealer but it was genuine before formating .Also provide me th ebest possible solutions if it was not dobne from since i m new in this .

Read other answers
RELEVANCY SCORE 69.2

I'm having an odd problem on two different PCs. Both are WinXP and clear of spyware. They share very few other details, making it odd that they have the same exact problem.

Once I insert a CD into the optical drive (a Pioneer 108 DVD+-RW on one machine and a LiteOn DVD ROM on the other), the computer reads it and then ANY OTHER disc I put in after the first one seems to go unrecognized. Not only that, but bringing up "My Computer" shows that the drive is saying the FIRST disc's directory.

The only program I have on both which I suspect is CopyToDVD. Any suggestions? (I've already tried uninstalling it and it didn't solve the issue).
 

A:CD/DVD Drive recognizes first disc then sees all others as the first disc

Sounds like you have auto run turned off. My pc does the same but i dont want cd's auto running so i just put up with it.
 

Read other 4 answers
RELEVANCY SCORE 69.2

I have a HP laptop running Vista Home Premium. I have a DVD+/- R/RW with Lightscribe drive.

After I burn any type of CD or DVD, either in iTunes or using the default program that came with my computer, no CD or DVD will be recognized by my computer until I restart the computer.

If I go to My Computer after inserting a disc it will show an icon for "CD-Rom" (i put in a audio cd) and if I double click on it will prompt with "Insert a Disc" and eject my drive.

The fact that if I restart and it works is alright, but it's stupidly annoying if I'm trying to back-up my computer and I have to restart every time I want to burn another CD.

What can I try to do to fix this?
 

Read other answers
RELEVANCY SCORE 69.2

Hi, a buddy of mine's POS laptop isn't booting since he lent it to his friend. (Great friend huh?)

It's got Vista home premium, I've had a play with it and it wont boot in safe mode, the recovery tool fails, he has no restore points, and it's basically bricked. (BIOS sees the hard drive, the memory test tool doesn't report any problems, so HD is fine as far as I can tell)

He's happy to lose his C: drive, and I'm not willing to spend any effort on it. However, he's not happy to spend any cash on it, which is a problem because he doesn't have a windows disk.

The hard drive also doesn't have a recovery sector.

Is there a way to legally download Windows Vista? If I'm going to go through the effort of pirating a copy of Windows Vista, to then use a legal key he has stuck to bottom of it, then I might as well just download a OS that isn't terrible tbh.

So yeah
TLDR:
Vista Broke. Need disc, is there a way to download a .ISO for Windows Vista without infringing copyright laws? Or is it a case of "Put hand in pocket."

Read other answers
RELEVANCY SCORE 69.2

Machines:
Dell Dimension 4600i
BIOS ver;A12
IBM 10.4gb hdd (ata/ide)
Single partition (ext3) OS linux Fedora LXDE spin
Status: Running

Generic PC (Elderly)
Phoenix Bios
WD400 40gb hdd (EIDE)
Single Partition (NTFS) os XP pro Ver:2002 SP3
Status: Running

Situation:
Need to reconfigure so Generic Box is running 10gb hdd with fedora and dell box is
running 40gb hdd with windows and associated installed apps and data

Action:
Swap Drives

Results:
Generic Box boots Fedora (Some video drvr file need to be installed manually No
longer supplied with Fedora 17)
Runs fine "out of the box"

Dell box attempts to boot MS os on c:
Flashes BSOD (assume BSOD 7b, too fast to read) loops to restart, BSOD, restart, etc
Not unexpected as installed os is using installed drivers for hdware on original Generic box

Action:
Create bootable USB fdd using BartPE build from MS XP (sp3) install cd
Boot Dell box from USB to run "Repair" on C:
Note this is not OEM (Dell) cd. Dell box obtained with linux OS and no XP anything available so built from my own MS XP install disk used to install OS on Generic Box

Results:
Bios recognizes USB and starts boot
Inspecting Hardware
Starting BartPE
Window "Splash" appears with "loading bar" animated
BSOD 7b 0xf7cb0528, 0x00000034, 0x00000000, 0x00000000

Action:
Gnash Teeth and Curse
Assume Dell bios not playing well with XP disc other than its own proprietary xp
install.
Search web for similar issue, workaround, ... Read more

A:Solved: Using MS XP disc On Dell machine (Not OEM disc)

Cant you like flash a motherboard with a different bios im not sure how this would work but I woilld figure it could fix the issue
 

Read other 3 answers
RELEVANCY SCORE 69.2

May some1 tell me how to burn windows setup disc into dvd disc?

Cauz everytime i try it doesnt work and it keep asking a blank dvd disc when is blank. And when i insert my dvd disc. It freezes at "My Computer" when i try to check D: which is where the blank dvd is located

And when i try to burn it into a dvd disc

It says asking to erase data in the disc. but is a completely brand new and blank dvd disc. It says " Error Erasing Media"

A:How To Burn Windows Setup Disc Into DVD Disc?

Setup disk? I'm not sure I understand. What, exactly, are you trying to burn to DVD?

Read other 21 answers
RELEVANCY SCORE 69.2

Hello I'm wanting to  complete a factory restore (reinstall operating systems, app's and personal doc's) to clean & freshen-up my desktop computer.  With that in mind, I went to create a set of recovery disks (with original factory software) and was told I've made a set of disc's in the past.  The system only lets you make one copy.  The only disc's I can locate are labled "reapair" ... are these the same as "recovery"  ??? Any constructive feedback would be appreciated. Blessings XTC

Read other answers
RELEVANCY SCORE 69.2

I have a Dell Inspiron 580 I may have to uninstall and reinstall windows 7 x64 on my computer. A windows 7 disc did not come with the computer, it came with promises that there was another way. I have a repair disc I made near the time I got my computer. I have a vague memory of something going wrong with the process of making said disc but it was so long ago I'm no longer sure if that's true or if it is what the problem was. Am I right that a back up disc or a restore disc or a repair disc does not reinstall windows 7? If I made a backup disc through the control panel thing will I end up backing up the thing that's causing me a problem? Is there a way I can get a Windows 7 x64 installation disc without going out and buying it? please and thank you

A:Backup disc VS restore VS installation disc.

See this tutorial...
Clean Install Windows 7
...it has a link to download W7 DVD in step 1.

Read other 2 answers
RELEVANCY SCORE 69.2

Hello

I have a slight problem with my DVD burner. Since I've had it i've been burning dvds and cd-rs for a while, now all of a sudden it won't detect my cd-r discs when i put in through my Nero softeware. But if i put in a dvd movie the green light comes on and then my little box appears and i can choose to play it through windows media player or my dvd software.

When i try to make a music cd and nero ask me to put in a blank cd, i put one in but it doesn't detect it and the window still stays up. I don't know what to do.

I've tried reinstalling Nero and that didn't work, can someone please help me with this problem
 

Read other answers