Over 1 million tech questions and answers.

A simple problem to solve.... you would think!

Q: A simple problem to solve.... you would think!

Here's the situation: I was about to back up my files by transferring them to an external hard drive and was in Documents for that purpose, when I did something that triggered a 'spinning circle' (called a Throbber I believe). I waited for a few minutes but the throbber continued to be there, and the computer continued to do whatever it was doing, so I closed the Windows File Explorer, hoping to start fresh without a throbber. But when I opened the new Windows Explorer the spinning circle was still there and instead of being there for a few seconds--as the green line went left to right across the top and then presenting Documents, Downloads, Music, Videos, etc. when the green line completed its journey, with the spinning circle disappearing as it always does at that point-- the throbber remained, as the green line went 99% of the way across and then stopped.

My initial reaction was to give it as much time as it needed, especially since the words 'This folder is empty' were there, which is always the case when I first open the Windows Explorer for the day, but 'This folder is empty' normally disappears after a few seconds along with the spinning circle, but this time, because it was not completing the process for some reason, the spinning circle remained. I decided to give it more time, but now 'giving it more time' is obviously not enough since that was 20 hours ago! The green line is still there, 99% of the way to completion, but not progressing!

I was going to use the Task Manager and click End Task for the Windows Explorer but the fact that the words 'This folder is empty' were there gave me pause. I was afraid I would lose all my files! So I'm here, asking for advice on how to safely proceed: how I can end this impasse while not jeopardizing any of my files.

Read other answers
Preferred Solution: A simple problem to solve.... you would think!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


Can you guys help me with this log?

The problem I have is that whenever I start the computer, I get a window that pops up that is titled "Comcast Reboot Helper" with a MPC symbol in the left corner. The message in the dialogue box says "Please wait while the installation continues. If you have removed the CD, re-insert it now.

I have run Hijack this, spybot, and security task manager and could find no reference to it. I have also looked in boot.ini and startup under msconfig and could not find anything.

Can anybody figure this out??

My scans are :

Incident Status Location

Adware:adware/dollarrevenue Not disinfected c:\windows\timessquare1.dat
Adware:adware/commad Not disinfected Windows Registry ... Read more

A:Simple problem? Can't solve it..

Sorry, the details of my problem are in the windows XP forum.
The problem I have is that whenever I start the computer, I get a window that pops up that is titled "Comcast Reboot Helper" with a MPC symbol in the left corner. The message in the dialogue box says "Please wait while the installation continues. If you have removed the CD, re-insert it now. I have run Hijack this, spybot, and security task manager and could find no reference to it. I have also looked in boot.ini and startup under msconfig and could not find anything.

Can anybody figure this out??

Read other 1 answers

ok i was stupid enough to use Cox communication cd and now that cd has taken over my computer, i went in to add and remove programs and took it off however cox is still lurking in my computer for example they changed my internet explorer instead of an E i get cox and they just modifed some of my programs to make it thier isnt that quaint any suggestions on removing those stupid things

A:another simple problem i cant seem to solve

My guess is most likely just have "Cox" branding of IE but it's still IE. Check here in the registry and see what you find.

Start Regedit and navigate to

HKLM\Software\Microsoft\Internet Explorer\Toolbar

Delete the keys for "BrandBitmap" and "SmBrandBitmap"

Then restart Internet Explorer for the change to take effect.

Read other 1 answers

Hello fellow!

I am new to these forums, and have decided to give them a question of my own.

I have a network of PCs of 100+ computers, and have a single file that I need to place on every computer. They all have a single folder shared, which is named exactly the same as the next, so my question is this:

Is there a command that I could use to copy a file from my computer to the folder on each of the Computers on my network, without having to type the command 100+ times?

In a simple way, I am asking this -- Is it possible to do this:

copy "c:\something.bat" "\\*\c:\shared folder\something.bat"

I am sure that we have all had a bit of command line experience, so this command should be pretty easy to understand.

A:Simple Command To Solve A Big Problem?

Read other 12 answers

Hey, i am having a problem loading specific videos, and i cant seem to figure out which player it is that won't load so therefore i can't even begin to solve the problem. Here is the info i have including links to specific videos:

When i click on the video it takes me to the page and it shows a big square with an Icon in the corner of a Square,Circle, and Triangle.
Here is a Link to a Video that i cannot play:


I have downloaded the latest version of Macromedia Flash Player, I have Windows Media Player 10, and I just downloaded the newest version of Quicktime, I have the Divx codec, im running Windows XP Pro if that helps at all. I did put in my system specs if you know how to check them out, I don't know how to do that since this is my first time here.

Anyway this is really annoying since it happens on alot of sites when im trying to watch funny videos that people tell me to watch. Any help would be greatly appreciated.

A:This is probably a simple problem to solve concerning video

Read other 16 answers

Hello! in dire need of some tech support. So here's the background... I was given a Toshiba Satellite A135 running on Windows 7. I got a virus and tried to DIY reformat. I DO NOT HAVE THE ORIGINAL WINDOW 7 CD and was only given a "burnt copy of windows 7" by a friend.. So i searched online, especially utube, searching for how to reformat WITHOUT a cd and decided to follow what this guy said ()... The only FILES i backed up were my movies, music, word docs, and pdf's. So anything "driver" related i didn't back up.

i did the whole f8 thing WITH my friends burnt cd inserted (i dont know if that makes a difference). If you view the utube video, i got to around 2:10 and deleted EVERYTHING. First of all there were 3 disk partion options to select instead of just one like in the video. So i deleted all three because i assumed all 3 were infected. Either way it did not let me progress and i forgot what it said, but it gave me an error window stating something about a missing screen image.

So i restarted the whole thing and just like at 1:48 my laptop gave me the option to choose the OS i'd like to install. From a loooooooong list i just chose the first which is windows 7 Homebasic Activated. I click next, accept the license terms and just like in the utube video at 2:07 i choose custom (advanced). Now those 3 partitions have reappeared. So i chose "reformat" for all 3 (the last partition doesn't allow me to choose any o... Read more

A:Let's see if you techies can solve this "simple" reformat problem...

You need to purchase an original OS disc before we can offer help.

Read other 1 answers

i have got a folder that cannot be deleted i saw many tutorials using cmd i dont know how to use can you please tell me how to delete that folder please

A:just a simple help i know you can solve it please

Right click and click delete?

What type of folder are you trying to delete??? (System files? Personal Documents?)
You may be running that folder - close the window and try delete it again.

If problem persists, try the posts below.

Read other 4 answers


When using my hotmail account I want my sent messages to save in the designated folder but they do not. How can I change this?



A:sent messages dont save (should be simple to solve)

Read other 7 answers

I’m working with the new MPlayer2.exe under windows in slave mode. I really need a solution for this seeking problem in MPlayer2, when seeking in MPEG1 program stream files.

I want to do a precise seek in a MPEG1 program stream files(m2v video with mp2 audio), using the new MPlayer2.exe precise seek command, seek <value> [type] [hr-seek].

The way I used the command is,
seek <value> [type] [hr-seek]
type = 2 is a seek to an absolute position of <value> seconds.
hr-seek = 1 means force precise seek if possible.
In my C code I gave the command with the <value> for the time position as a double, calculated for the required frame. ("seek %f 2 1", fTime).
Eg- ‘seek 4.28 2 1’

This works for MPEG2 program stream files(m2v video with mp2 audio), and other types like .AVI.
But for MPEG1 program stream files it jumps only to the key frames and not to the exact frame as expected.

I have uploaded MPEG1 program stream sample files at,

When I asked about this from Mplayer2 support team, they told me that , “When explicitly
specifying --demuxer=lavf the libavformat demuxer is successfully
opened, but it then fails to do time-based seeking properly with this
file (the only position it successfully seeks to is the beginning).”
When I asked further, Mplayer2 replied me a... Read more

A:Need support to solve the problem in libavformat, which led to a seeking problem in M

If you get the answer, will you even read it?


You have been asked to STOP creating new topics.

Read other 1 answers

When windows 7 starts I get this message "There was a problem starting msirhl32.dll the specified module could not be found"

Please help me to find a suitable solution

Thanks in advance

A:I need Your Help to Solve a Problem

Hello hiamer and welcome to Seven Forums.

Try running a System File Checker scan from an elevated command prompt (Option Two, this tutorial.)

SFC /SCANNOW Command - System File Checker

If any problems are found run the scan three times rebooting after each scan. Let us know if it helps.

Also, what antivirus are you running?

Read other 9 answers

i have problem in acces..

i have one table : my name table is: sort



now the data in table
5 1/08/2007
5 2/08/2007
5 3/08/2007
4 4/08/2007
4 5/08/2007
3 6/08/2007
2 7/08/2007
2 8/08/2007
1 9/08/2007
1 10/08/2007

my problem is how to creeate query in acces until the result like this
5 3/08/2007
4 5/08/2007
3 6/08/2007
2 8/08/2007
1 10/08/2007

what syntax in sql query?can u help me?

regards by credendo_vid3s

A:anyone, PLease help me to solve my problem?

It would help a lot to see the actual data.
But you could try this, create a select query and then click View>Totals.
The totals wizard will make all the columns "Total field" "Group BY".
Change the Date from "Group By" to "Max".

I would advise that you post Access/Excel Questions on the "Business Applications" Forum as you will get more responses there.

Read other 1 answers

Error: The application or DLL C:\WINDOWS\system32\dciman.dll is not a valid Windows image. Please check this against your installation diskette.

A:please solve this problem

Although it's a different driver, just do this: Error message when you start a Windows XP-based computer: "The application or DLL C:\Windows\system32\winspool.drv is not a valid Windows image"

Read other 4 answers

Hello.My Problem Is I want to backup my netbook with acer erecovery management but it say "Hard Drive Configuration is not set to the factory default.backup aborted.

A:Can Someone Help Me Solve This Problem

HiYou are using non OEM OS, & the unit is not factory formated, you could not use acer recovery manager to backup or create recovery,. you can use Windows system recovery or there are various programs available online which can do the same job as Acer recovery Manager

Read other 2 answers

hi sir i am using windows xp version when i switch on the system then one error message is coming
can not find script file "C:/DOCUME1/raju/LOCAL1/temp/stop-virus.vbs",
pls tell me how to solve this problem.

Thanking you

A:pls tell me how to solve this problem

Hi rathnaavj,

Boot the computer into safe mode scan your system for viruses/spyware. Turn on your computer and keep on tapping the F8 key on your keyboard to get to the Safe Mode Menu option. When the safe mode menu comes up, choose "Safe Mode w/ Networking". Scan your computer for viruses/spyware in safe mode and delete any infections found. Hope everything works out for you.

Read other 2 answers

I have a new Matsonic mobo with a 2.4 GHz Pentium 4 processor and 120GB hdd.
When I connected everything, everything was recognized. The hdd, fdd, cd-rom, RAM, etc. It went through the post just fine. Then, all I get is a blinking cursor. I cannot get the [email protected][email protected]! thing to boot from a bootable floppy or from the cdrom. After it recognizes everything, it's like it doesn't have any connection. All I get is the flippin' blinking cursor.
I know there is someone out there with the knowledge to help me.


A:The Problem NO ONE can solve

Read other 12 answers

Dear All,

Recently I encounter a problem at my IE address bar...

There is a "permanent" link "stuck" in my address bar, it's at the right side. I tried to clear the history, but the link is still there.

I can't delete or remove it!

Anyone who know how to remove it, please help me, the link is very annoying.


(p/s: it is shown in the file attatched)

btw...which software is the best to block pop-ups and spyware?

A:Please help me to solve this problem...

Hi and Welcome to TSF

Is it there no matter what site you view? In the address bar as shwo in your attachment, it is showing about:blank, if you change this will the link go away?
It sorat looks like some type of spyware/ browser hijacker

First follow these instructions

First Steps at Removing Malware

Read other 1 answers

I have an all-in-one Sony Vaio Desktop that has Vista home premium. This desktop is about 5 years old but for the first three and a half years was rarely used, so it's in fairly new and in really good condition.

This past couple of weeks, out of the blue the PC will reboot itself, and once it restarts I get this:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8004025A30
BCP3: FFFFFA8006217050
BCP4: FFFFFA8004267010
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Users\Username\AppData\Local\Temp\WERC8BA.tmp.v ersion.txt
Read our privacy statement:
It will ask if I want to search online for a solution but it never returns with any solution.

Does anyone have an idea how to solve this problem?

A:Please help me solve this problem

Welcome to our Forum Alexa

Without the dump reports from your computer any help would at best be a guess. If you provide this information you will be given the best help available.
Blue Screen of Death (BSOD) Posting Instructions

Read other 5 answers

i want to remove otshot from my computer
Edit: Moved from Bleeping Computer Applications and Guides\Tutorials forum to a more appropriate forum

A:solve problem

Welcome aboard   Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is placed next to Up... Read more

Read other 1 answers

I hope the title doesn't turn anyone off to reading this. I think the person who can solve my problem should win... some huge award, as I have yet to find someone can help me... ^_^

Here we go,

About 6 months ago, I got windows XP, and built myself a new computer. Before that, I had been using DSL provided by Earthlink, and I continue to use it to this day. My problem started a few months after I got my computer, and it's kinda hard to describe. The best way to describe the problem is "getting disconected from the Internet every 10 seconds for 1 milisecond." I use a router, so I never actually 'connect' to Earthlink to get to the internet, I am always on, but it seems as though I get short lapses in my internet, causing me to
- be kicked off aim every 5 seconds,
- have to refresh a lot of webpages becuase they just don't load, or they load for a sec then IE gives me an error saying it couldn't find the server, or that the page could not be found, (the detect network settings page)
- get booted from all multiplayer games
- spend hours on the phone with the motherboard company, network card company, ISP, all to no avail. Generally it happens when I am on AIM, (aol instant messenger) and I can still see people online, but when I try to check their profiles, I get a "Please wait......" sign, and I eventually get a window from AIM that says I've been disconnected and it has to reconnect. Lately, it's been happening ... Read more

A:A problem that no one can seem to solve... help?

Have you got a UPS? The symptoms you describe could be down to a momentary fluctuation in the power supply. I would get one and connect both the PC and the router to it. Are the other PCs that aren't affected on the same ring main? If they are it could be a fault with the PC or router's own PSU.

Other than that it has to be a process of elimination. Start with the physical hardware, including the cable and the port on the router, and try swapping out for known good items. Exhaust all those possibilities, then update all relevant drivers etc.

Does the router do DHCP? Its a long shot but check that the DHCP lease period isn't set incorrectly (to 10 seconds).

Do you have any other devices on this network segment that may be broadcasting and saturating the network bandwidth for a ms every 10 seconds? Or any other software on the PC that might be doing the same?

Read other 2 answers

"class installer denies the request to install or upgrade this device" Has anyone else had this error when they tried to install a printer/scanner / camera ? if so i would love to here from you because i dont know what else to try this is the 3rd time i have posted this problem

A:still cant solve this problem

which device'(s) are you having probs. installing?

Read other 6 answers

Hi all!

I am new to this forum.

I would like your help in tackling this annoying problem.

I got flustered by the about:blank virus which was removed successfully after scanning with PC Doctor.

However, I seem to have lost an essential file and the following message pops up whenever I switch on my computer. Please help me get rid of it.
I am using Windows XP Pro

The pop up says like this:

Error loading C:\DOCUME~1\JINESH~1\LOCALS~1\Temp\se.dll

The specified module could not be found

I hope the experts will help settle this one.

Thank you very much.


A:How to solve the se.dll problem

Create a directory on your hardrive to save HijackThis.exe. A directory like c:\hijackthis. If you do not do this, you will not be able to use the backup/restore features.Download HijackThis from:HijackThis Download SiteSave this file into the directory you made previously and then run the program named hijackthis.exe. When the program opens click on the Config button, then click on the Misc Tools button, and click on the Check for update online button. When it completes checking/applying updates press the back button.Now click on the Scan button and when it is finished click on the Save Log button. A Notepad window will open with the contents of this log. Click on Edit then click on Select all. Then click on Edit and then Click on Copy.Create a reply to this post here and right click in message area and select paste to paste the log into the post.Someone will reply to you after reading this post. DO NOT fix any entries unless you understand what you are doing.To see a tutorial with screenshots on using HijackThis you can click on the link below:How to use HijackThis to remove Browser Hijackers, Malware, & Spyware

Read other 1 answers

Today when I was running my computer and playing a game it shut down with creating a weird noise. So I start the computer again and it shows a screen where it says "CPU was shut down due to over heating so it does not effect any components" So I downloaded SpeedFan to see my CPU temp It was 70 C I was like thats too much so I shut it down to see if everything is good. Then I opened my CPU and the fan and the heat sink was very dirty. So I take out the fan anf the heatsink and clean them. I also noticed that there isnt much thermal paste on the processor. But whatever I cleaned the heatsink and the fan then put them back. Then I run the computer and even tho the temperature is a lot low as it is 52 C rite now. I still think the heat is a bit too much. As last time I checked when its normal its around 38-43 C. Im wondering now that if I re-apply the thermal paste will it be back to normal or wat is the reason that the heat isn't normal? Any suggestions are appreciated.

More info:
proccesor: Intel Pentium D 2.8 Gh

Thank you

A:How to solve this problem----->

You need to obtain some thermal paste, very high heat conductive, as that makes the seal
between heatsink and cpu dissipate the heat.

Read other 1 answers

So - i am having a network issue that i cant figure out---> "vista Home Premium x64"

When ever i lock my computer and am away from it for a while i loose my internet connection, then i have to restart to get it back.... i am running fios so i should have a constant connection....I use remote desktop to that machine and also i have IM clients running where family and friends from other states and time zones can leave me a message...
what i did -
When i view my internet connection there was a RED X between my router and the globe, so i knew i had a issue - the 2 fixes so far:
1) new network cable
2) control pannel --> NIC --> turned off the options that turns off connection to save power.

A:a problem i cant solve

check out this MS KB, it addresses several issues, one of which is when the computer returns from hibernation it looses network info, specifically gateway info.

Read other 1 answers

Dear all,
My computer install windows 8. After i install http://download.microsoft.com/downlo...0/EUupdate.EXE to try fonts problem in chromes... but when i install it, all icon of menu in start screen got problem! please help me!

A:I need help to solve may problem!

see here for fix: appearance problem with won 8

Read other 2 answers

i live in florida and last week we had a storm and the power went out several times. my computer now crashes if i try to uninstall any program or after it sets idol for a couple of hours it crashes. i tried restore and still the samething. i get diffrent messages like plug-in overload and others. any ideas on what went wrong?

A:help i have problem i can't solve

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.

Read other 18 answers

Hard Disk Partition is not opening

A:Please solve my problem

Please see this...
Specifically, points 4 and 5.

Read other 1 answers

Hows it going, guys? I have the tech problem that no one on Earth seems to have a clue about so if anyone can help me Id greatly appreciate it. I had a DVD/CD RW drive that did EVERYTHING perfectly except for ONE thing. If I wanted to play a PC game from the DVD it wouldnt read the disc. It would install a game from the DVD just fine, but when I click on the icon to start the game it would just say "Disc not inserted" or something similar. I thought the drive must have been hosed so I got a new one. EXACT same thing happens. It will play music CD's, play DVD movies, burn CD's and DVD's, and play CD-ROM games and install either DVD or CD games. But as soon as I try to PLAY the game from DVD, like my new Half Life 2 or Unreal Tournament 2004, it just doesnt seem to read the disc so it wont start. WHAT THE [email protected]#??!! These are legit store bought copies, not ripped copies or anything like that. HELP!!!

system specs:

A:The problem NO ONE can solve

Read other 10 answers

Hi every one i have problem accidently my recovery partition was deleted so can i get back recovery manager is their any solve

A:is their a solve of this problem

Hi,Specs: http://support.hp.com/in-en/document/c04778325Your laptop came with Windows 10 Home 64bit.If you need to factory reset, you need to order recovery USB from HP directly.http://support.hp.com/in-en/document/bph07143http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlYou can alternatively clean install Windows 10 Home 64 bit: https://www.tenforums.com/tutorials/9230-windows-10-iso-download.htmlAdditional drivers here: http://support.hp.com/us-en/drivers/selfservice/HP-14-Notebook-PC-series/8499318/model/8902762RegardsVisruth

Read other 1 answers

Looking for a utility that will repair corrupted Outlook Express files (.DBX files).
I'm currently using a utility called Advanced Outlook Express Repair.
The problem is that this utility can't completely recover all of the corrupted Outlook Express (.DBX) files.
What other kind of Outlook Express database recovery utilities are available that will be able to fully and completely repair badly corrupted Outlook Express .DBX files?

Read other answers

please help i have ran virus checks and spyware checks but nothing seems to help my situation. whenever i run a program after a short while it will tell me that the program has encounteed a problem and needs to close. i am a beginner with this so please bare with me. i was recommened this site by a friend and i'm hoping you will be able to asist me with my problems. many thanks

A:help!! problem not solve...

Read other 16 answers

well,hope you all in good condition.
i have a problem with lag(online game)
why?i have use ccleaner or other hardware but it still the same..
are the problem cause by the internet connection?
pls tell me...

Read other answers

I Had A Problem About Hidden Folder. I Know How To See Hidden Folder By Changing The Option In Folder Option. My Problem Is Whenever I Perform The Change I Mean I Try To Go To Tools>folder Options>view>hidden Files And Folder>show Hidden Files And Folder And Check It And Click Ok And Return Then Automatically This Option Becomes Again Inactive. I Dont Know Why?? Who Can Help Me??

A:I Cant Solve My Problem

Have you tried clicking apply ....before ok

Read other 1 answers

See the attachment please

A:please solve my this problem

What exactly were you trying to do...??

Read other 2 answers

When i try to open a '*.msi' file, it always say that

visual c++ runtime library

Runtime error!

Program: C:\Windows\system32\MsiExec.exe


-not enough space for thread data

http://tinypic.com/xe0lzm.jpg picture pf the problem here

How can i solve this problem? I could install msi files before. it had worked fine, but now it have this kind of a problem, I don't know how to solve it and I searched for solutions but I didn't get any. Can anyone help? I reinstalled WindowsInstaller-KB893803-v2-x, still, it has the same problem.

I'd be very thankful if you could help me!

A:Anyone can solve this problem?

According to Microsoft "This behavior can occur if the disk that contains the Windows swap file does not have sufficient free disk space".

Read other 2 answers

hello guys
i have 40gb seagate hard drive but my mother can't detect it.
i have genien intel motherboard version 2.1 , 550mhz
proccssor,192mb ram ,32mb agp card . plz tell what should i do .

A:help to solve problem

Did you try going into the bios and setup it there? Also check the jumper on the back of the harddrive, and maybe change the ide cable position.. instead of the very end change it to the 2nd one.

Read other 1 answers

My lenovo think pad R61's Wi-Fi and bluetooth isn't working.I have on its switch an press fn+f5 but light doesn't glow on pannel. Kindly solve it.

Read other answers

My pc was affected by a lot of viruses like [email protected]
and trojan.vundo,infostealer etc. I tried spyware doctor and also norton antivirus2007.But there is no improvement.I need to restart my system for every 10 to 15 mintues.My explorer.exe file is taking at about 85% of system process,once i start internet and system is hanging,please help to resolve the problem,otherwise my system will be totally affected.

A:please help me to solve the problem

Hello and welcome to the TSF.

Please post the two text files, main.txt and extra.txt produced by theDeckard's System Scanner as instructed in IMPORTANT - Read This Before Posting A Log.

Read other 2 answers

So i've built a pc, and after some days I changed the stockcooler, after I changed the cooler I booted up the pc. The pc boots up but some usb ports don't work and it shows no Display. I searched for the problem and some people said it was the motherboard that was damaged, so I did that, bought a new motherboard, built the pc again and the problem was still the same. Can anyone help me solve the problem?

PC specs:

- Ryzen 7 2700x

-Ram Memory - 16 GB of Ram Memory

-GraphicCard - Rtx 2070 Super 8 gb

-Power Supply - Corsair RM650x 650W

-Ssd - 1 Tb Ssd

-Motherboard - MSI B450M Pro-VDH Max

Read other answers

i have 8800gt installed in my pc with the last driver
and the pc hardware with the lastes driver
the 8800gt run the counter strike 1.6 non steam very badly all the time the game shocks and the sound is straching
and i used this command and did not work
Rate 25000
cl_updaterate 101
cl_cmdrate 101

what is the problem the fps 100 alll the time
in cod4 the game is perfect what the problem
i have
core 2 dou 6320
motheboard intel 965 dqgf
2 gb ram ddr2 667
8800gt video card
power supply 500 whatt

this is a little video what sounds i hear while playing without pres Esc

A:ho can solve this problem


Please do not make duplicate posts.

Read other 1 answers

K, there's this new game out now but the recommended system requirements are higher than my system. It recommends a 3 gig processor, 1 gig ram, and a geforce 6800 or equivilent. I have a 2.6 gig processor, 1 gig ram, and a geforce 6600. If I buy, say, another half of gig of ram, do you guys think that extra ram would make up for my lack of processor speed and/or video card? (By the way, the new game I am referring to is Oblivion)

Thanks in advance.

A:Would RAM solve the problem?

that's the recommended specs. your computer will run it fine. of course more RAM is never a bad thing... but you dont need it.

Read other 3 answers

Hi guys.. i think i have specific problem.i have infected and windows is showing vgatray exe an saying you are not using licensed software then i have run combofix has restarted system and removed infected files but a little time later same files again placed same location when i look.i think my pc downloading files from an ip number or anything.when i look to services im seeing a new service of rpcnet.exe and RPC service.Please help me which tool can i use to clean my sytem combofix log is below.ComboFix 08-09-05.09 - Administrator 2008-09-08 22:04:04.1 - NTFSx86Microsoft Windows XP Professional 5.1.2600.2.1254.1.1055.18.633 [GMT 3:00]Running from: C:\Documents and Settings\Administrator\Desktop\ComboFix.exe * Created a new restore pointWARNING -THIS MACHINE DOES NOT HAVE THE RECOVERY CONSOLE INSTALLED !!.((((((((((((((((((((((((((((((((((((((( Other Deletions ))))))))))))))))))))))))))))))))))))))))))))))))).C:\Program Files\Messenger\msgmr.dllC:\WINDOWS\AppPatch\AcSpecf.dllC:\WINDOWS\AppPatch\AcXtrnel.sdbC:\WINDOWS\Downloaded Program Files\ThunderAdvise.dllC:\WINDOWS\Fonts\Framdee.ttfC:\WINDOWS\sysocmgr.dllC:\WINDOWS\system32\adsntzt.dllC:\WINDOWS\system32\adsntzt.nlsC:\WINDOWS\system32\avicapwm.dllC:\WINDOWS\system32\avicapwm.nlsC:\WINDOWS\system32\bootvidgj.dllC:\WINDOWS\... Read more

A:Please Help.. I Cannot Solve This Problem What I Do..

Please note the message text in blue at the top of this forum. ComboFix logs should not to be posted outside the HijackThis forums and then only when requested by a HJT Team member. It is an extremely powerful tool which should only be used when instructed to do so by someone who has been properly trained. ComboFix is intended by its creator to be "used under the guidance and supervision of an expert", NOT for private use. Please read Combofix's Disclaimer. Using this tool incorrectly could lead to disastrous problems with your operating system such as preventing it from ever starting again. Further, you did not follow the required instructions for using ComboFix which are provided when the tool is used under proper supervision as its log indicates your machine does not have the Recovery Console installed.Please create a new topic explaining the nature of your problem in the Am I infected? What do I do? forum. Describe pop-ups and system tray or desktop icons that have appeared. Explain what is "going wrong" with your computer. Note any tools you have used and their respective results.If needed, we will direct you to our HJT Preparation Guide.Thank you for using BleepingComputer as your malware removal source.This topic is now closed. The BC Staff

Read other 1 answers

hello i get this message when i try to log in to naviextras toolbox can anyone explain what i need to do to fix this.

error detected! server parameter error. authentication encryption malfunction.

any info would be really appreciated thanks.

A:hi can anyone tell me what i can do to solve this problem

Read other 11 answers

Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile. If this problem persists, contact your network administrator.

DETAIL - Error performing inpage operation.

A:how to solve this problem

You user name profile has become corrupted. Usually when this happens, Windows loads a Default user profile. You will be missing your personal files and icons on the desktop.
Go to Start/Run and type control userpasswords and press enter. Create a new user with Admin rights. Log out of the temp user account you are in and log in as the new user account you created . Now go to C:\Documents and Settings Open up your old user profile name folder. Here, Copy the Desktop, Favorites, My Documents and Start Menu folders and Paste them into your new profile folder overwriting the empty ones.

Read other 1 answers

Hi everyone, I'm new to this forum. I have a bit of a problem that I hope can be solved. I use AVG and it keeps reporting that I have been infected by a trojan horse and flagging up a .dll file in the system32 folder - sertgs.dll.

I've looked in the folder and this file doesnt appear to be in there and AVG doesnt appear to be able to do anything to solve the problem.

Now when I'm browsing the 'net sometimes if I type a URL into the address bar, I will be re-directed to a Google page which has some pre-defined seacrh for some kind of product. Im using XP and IE.

I use Ad-aware and Spybot which I run at least 2 or 3 times a week, I also have Spyware Blaster installed on my PC. I have also tried a couple of on-line scans which don't seem to spot anything.

Having tried all avenues using these various applications, I have decided to run HijackThis and post the log hoping that somebody may spot something in here.

Here it is:-

Logfile of HijackThis v1.99.1
Scan saved at 18:21:43, on 07/06/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Windows Defender\MsMpEng.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgu... Read more

A:can anyone solve this problem?

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem as soon as possible.

You may wish to Subscribe to this thread (Thread Tools) so that you are notified when you receive a reply.

Please be patient with me during this time.

Read other 19 answers

You could try resetting IE9 to its default settings.

Internet Explorer - Reset

You could also see if these Microsoft articles help.

Internet Explorer 9 Help and How-to - Microsoft Windows

How to reinstall or repair Internet Explorer in Windows 7, Windows Vista, and Windows XP

A:Cannot use IE9. How do I solve the problem?

You might also look into the suggestions here:

Internet Explorer 9 Error&#58; “Internet Explorer has stopped - Microsoft Answers

A Guy

Read other 1 answers