Over 1 million tech questions and answers.

Hyper-V Adapter issues Windows Server 2016 Broadcom

Q: Hyper-V Adapter issues Windows Server 2016 Broadcom

VM running server 2019 not getting internet access from V-adapter.

2016 Server with 2 Broadcom NetXtreme Gig adapters show internet access (#1 static IP, #2 dhcp)Created a Hyper-V external Ethernet Adapter off of #2 adapter above and shows internet access (allow mgmt checked)Assigned V-adapter to 2019VM but does not get internet connection (however, shows on 2016 server that it has internet access)
All adapters have updated drivers. I have recreated adapters/ switch/ VM.
No luck.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Hyper-V Adapter issues Windows Server 2016 Broadcom

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 78.4

Hey community. I was hoping for some clarification. I am use to working with VMWare ESXi VSphere for hypervisors. So I have been labbing for my MCSA and I notice alot of the context of MCSA material describes installing an instance of Windows Server 2016,
and then turning that into a Hyper-V Server. What I did was I installed Hyper-V Server 2016 on my ProLiant. Is there any reason why I would not want to do this ? I had to reference alot of white papers, manuals, eventually blogs, and I think a youtube video
or two before I could manage it from my remote PC. It involved adding the target computer via power shell, customizing the hosts file, adding the server within the PC's computer configuration I forget what exactly. I also had to disable the firewall on the
Hyper-V Server 2016 before the Hyper-V Server 2016 hosted on the ProLiant started appearing in my Hyper-V Manager from my Windows 10 Pro machine.

However I was listening to this gentleman's youtube video.
https://www.youtube.com/watch?v=CdJJ4jiYx0Q
and he explains that Hyper-V Server is meant to be installed as a bare metal Hypervisor which is what I did do but because i was accustomed to working with VMWare SAN's that are the same way where you install the Hypervisor on the host machine and start
spinning up virtual machines. However I noticed i got some updates on the Hyper-V-Server 2016 the other day and not all of them wanted to install ... I believe some of the updates were for Windows so it went int... Read more

Read other answers
RELEVANCY SCORE 78.4

Hey,
I have two problems so i will explain the scenario then number out the issue. I had a new hard drive installed, when i booted the laptop, it worked well. The wifi in my area is very low so I was told I can use a wireless adpter to "boost" the signal strength received. I was given a Encore ENUWI-N3 Wireless Adapter to use. I installed the utility program from the official website and the computer still did not recognise the device, so I deleted the program. I then lost connection to the internet, and at the time i thought the wifi can dropped (i later realised that was not the case since my phone's wifi was still connected). I then reinstalled the software ( the executible file was saved on the harddrive), and it give me the same message that there are no drivers for the adapter.

I shifted my attention to my failed internet connection, after troubleshooting it give me a error 28 message stating that there were no drivers installed for the Broadcom wireless adapter that is internally installed. I tried a system restore to before i tried installing the Encore adapter, and still nothing, the system continued to give me the same message and it registered in the "device manager" as unknown device named "ethernet controller" with a yellow triangle with an exclamation mark. I have been able to borrow a laptop and download the LAN adapter fron the ACER support website, and although it had no "set up.exe" file visible i was able to get... Read more

A:Encore ENUWI-N3 Wireless Adapter plus internal broadcom adapter issues

What is the purpose of all those links at the end of your post?

What is listed in Device Manager under Network Adapters?

What, if any, warnings or errors (yellow or red) flags are anywhere in Device Manager?

While trying to connect by both ethernet and Wi-Fi ...

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 7 or Vista I prefer to use the built-in Snipping Tool.

Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 73.6

Hello..

Sorry my first post is going to be a 'help me plz!!' post.. but I'm reaaally stumped.

I was downloading updates through Windows Update a few days ago.. and I selected a few of the drivers that appeared as options. Unfortunately, that was a mistake. My laptop worked fine for a short time before it froze on me.. and the next time I booted.. I could not find the Broadcom 802.11 b/g WLAN entry in the Local Area Connection (under Network Connections) that I usually have.

It does show up under the device manager .. and claims to be working properly.. but.. it really isn't. I can't view any nearby wireless connections at all.. so I really don't think it's a problem with my router or anything like that.

There's a switch at near the bottom of my laptop (where I also plug in my headphone and microphone) .. when my wireless connection works, it is a blue light. If it's off/disabled/not working.. it's an orange. When I switch it on/off right at startup.. it freezes the computer. (Not sure if that random info would help... but there you go.)

I tried reinstalling the original drivers that came with my computer many many.. MANY times. And I tried looking online for newer drivers from the HP site by looking up my model number and downloading/installing the driver... but nothing. When I do an 'ipconfig /all' .. the Broadcom doesn't show up at all. (So renewing/releasing doesn't work) I tried resetting BIOS s... Read more

A:Issues with Broadcom 802.11 b/g WLAN adapter..?

Read other 12 answers
RELEVANCY SCORE 72.8

Hi,
Is it possible to install Windows server 2012 Hyper-v on windows 8 Hyper-v? or should I use Wmware Workstation.

Thanks

A:Virtualize for test Win2012 Hyper-v server on Windows 8 Hyper-v?

You can't run hyper-v (any version) inside a VM so neither would work,
and even if you could it would be so painfully slow as to be unusable.
 
 
Bob Comer - Microsoft MVP Virtual Machine

Read other 14 answers
RELEVANCY SCORE 68.4

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 67.2

I just installed Windows Server 2008 and cannot get my Broadcom BCM94312HGM wireless lan adapter to work. I had it working on Vista, XP SP2 and Ubuntu (Maverick), but on Server 2008 it isn't working. I have used the same BCMWL5 Version 5.10.79.14 driver for it all and it worked on all of the OS's except this one. I have tried newer versions and older versions but they didn't work either. If I go to device manager, it says it is installed, working and everything but when I try to locate networks it says no networks were found when I am even sitting next to the wireless router. When I go to network connections, it says the adapter is there but not connected. It is an internal non-removable adapter so it is connected. Can someone help please?
 

A:Solved: Windows server 2008 adapter issues

I figured it out, I had to also install a wlan upgrade from microsoft.
 

Read other 1 answers
RELEVANCY SCORE 65.2

Guys,

I upgraded my windows 7 beta last night to the RC1 release. The only issue i am having is that now my wireless driver is not working correctly.

under the device manager the error is "Windows cannot initialize the device driver for this hardware. (Code 37)"

I am using a macbook pro with bootcamp on it, the initial beta public release of Windows 7 picked up the drivers fine. For some reason after upgrading i can get no wireless though. I have tried downloading vista drivers, and just about everything i can think of. I also downloaded the Bootcamp Vista 32 Update from mac, but it did not resolve the problem either.

any help would be much appreciated, Thanks

A:Broadcom 802.11n Network Adapter (Windows 7 RC1)

  
Quote: Originally Posted by lvlaintown


Guys,

I upgraded my windows 7 beta last night to the RC1 release. The only issue i am having is that now my wireless driver is not working correctly.

under the device manager the error is "Windows cannot initialize the device driver for this hardware. (Code 37)"

I am using a macbook pro with bootcamp on it, the initial beta public release of Windows 7 picked up the drivers fine. For some reason after upgrading i can get no wireless though. I have tried downloading vista drivers, and just about everything i can think of. I also downloaded the Bootcamp Vista 32 Update from mac, but it did not resolve the problem either.

any help would be much appreciated, Thanks


can you remove these drivers and restart ?

can you tell us which adapter is it?
which exact model broadcomm n adapter?

Read other 9 answers
RELEVANCY SCORE 65.2

Whenever I make an external network adapter in Hyper-V the computer BSOD in about 5 minutes. The first time I got a memory management error and then I got a broadcom driver issue. According to BlueScreenView they were both caused by bcmwl63a.sys.

Read other answers
RELEVANCY SCORE 63.6

Hi,

I have a Dell XPS8300 with a DW1501 Wireless-N WLAN Half-Mini Card. I noticed that it drops Ethernet connection. If I reboot the modem/router, it works for the day but when I power down and bootup the next day, the connection defaults to wireless.  Dell swapped out the motherboard a few years ago, when the pc was still under warranty. They said it had a known issue where the integrated half cards had an issue.  It worked fine since then but I read articles that this is happening to people who upgraded to Windows 10.  I upgraded last year and this started about a  month ago.  Does anyone know if this issue is related to driver or if it is hardware?  Thanks!

Read other answers
RELEVANCY SCORE 63.6

As the title suggests, my laptop (Alienware m17x) is installed with the Broadcom 802.11n Network Adapter and Windows 7 64bit Home Premium.  I have had several other driver incompatibility issues with Windows 7, but those I have slowly been able to resolve.  This however just cropped up after two months of successful use.  Yesterday it started failing to connect to the internet, telling me that no wireless connections are available.  I live in a dorm, and everyone else on my floor has successful wireless, including my Ipod Touch, PS3 and XBox 360.  I called Alienware/Dell Support and we spent hours trying to fix the problem and all look well until I rebooted my laptop this morning and the same issue reappeared.  When I reboot my laptop, all I get is a notification that no networks appear in range.  If I uninstall the broadcom chip and let windows install it after a boot up it works until the machine is rebooted a second time.  I have tried over a dozen windows 7 drivers for the chip, and about half a dozen vista drivers and they all have the same results, works on the first boot, fails every time after that 

Read other answers
RELEVANCY SCORE 63.2

My office laptop was upgraded from WIndows 8.1 to Windows 10 Pro and now my wifi adapter has a Red X on it in the Device Manager.  I tried several Driver updates and none seem to work. It is also disabled in the Network Connections area.  I tried to enable it but it continues to show disabled. Using the auto update method did not find any drivers. This is the adapter with the Red X on it. BCM20702A0 Thanks,Kevin

A:Broadcom Wifi Adapter Stopped WOrking After WIndows 10 Upgra...

Hi: See if these W10 wifi and bluetooth drivers resolve the problem... This package provides the Broadcom Wireless LAN drivers for supported notebook models running a supported operating system. Broadcom Wireless LAN drivers are required to enable the integrated Broadcom Wireless LAN adapter. ftp://ftp.hp.com/pub/softpaq/sp78001-78500/sp78044.exe This package contains the Broadcom Bluetooth driver for supported models that are running a supported operating system. Broadcom Bluetooth Driver is required to enable Broadcom Bluetooth devices. ftp://ftp.hp.com/pub/softpaq/sp75001-75500/sp75330.exe

Read other 1 answers
RELEVANCY SCORE 60.8

Hey guys,

This is the first time using the forum so I apologize if this has been put in the incorrect place. My brother recently installed Hyper V Server 2012 r2, which boots up everytime I start my laptop. I just want help in how to completely remove the software and help get back my Windows 8. Neither me or him know how to get back to windows 8.

Thanks in advance guys.

A:Help with Windows Hyper V Server 2012 R2

Well, you must have a bootable Windows 8 DVD or USB. Go to the BIOS settings, select to have the DVD or USB device as first device. Then it should say "Press any key to boot from CD or DVD..." if you have a DVD or it will show the OEM or Windows logo directly (USB). When you are prompted for the installation type, choose Custom. Make sure you have backed up your files. Delete every partition of Disk 0 and then choose the Unallocated Space to install.

I hope this helps you.

Read other 4 answers
RELEVANCY SCORE 60.8

I bought the laptop with Win 8.1 installed. I was able to use Connectify software to tether internet connection from the ethernet to my phone through WiFi. After upgrading to Windows 10, trying to start a hotspot with the Connectify software throws the error "Your Wi-Fi adapter does not support AP mode. Please try updating the drivers for your Wi-Fi adapter". Trying to start a hotspot through command prompt using 'netsh wlan.....' throws the error "The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation" In the device manager, Driver Name :  Broadcom BCM43142 802.11 bgn Wi-Fi M.2 AdapterDriver Version : 7.35.344.0Driver Date :  1/26/2016 Seems updated. But, I am still not able to start a hotspot to tether the connection. Can anyone help me solve the problem?   

Read other answers
RELEVANCY SCORE 59.6

i have a hyperv server running on windows server 2012 platform, and i have a virtual machine configured on it.
i have created 2 virtual switches one for internal LAN and the other one it for WAN access.
this VM  will work as transparent bridge, so i have disabled the Allow Host to share network connection option on both Virtual switches.

now when i disconnect the cable from one interface the virtual switch keeps connected and the virtual machine does not detect that the cable is disconnected.

please advise.

Read other answers
RELEVANCY SCORE 58.8

I have created a Windows Home Server 2011 VM as a guest OS inside of Windows 10, which is the host OS. The VM is working and the networking is working (whew!). But I cannot figure out a way to get the integration services working. I've already selected Enhanced Session Mode in the Hyper-V Manager and Guest Services in the Integration Services portion of the VM settings. Can someone please provide me with a clue on how to get this working?
Thank you.

A:Hyper V: Integration Services for Windows Home Server 2011 VM?

Originally Posted by elessar25


I have created a Windows Home Server 2011 VM as a guest OS inside of Windows 10, which is the host OS. The VM is working and the networking is working (whew!). But I cannot figure out a way to get the integration services working. I've already selected Enhanced Session Mode in the Hyper-V Manager and Guest Services in the Integration Services portion of the VM settings. Can someone please provide me with a clue on how to get this working?
Thank you.



Anyone?

Read other 3 answers
RELEVANCY SCORE 58

I bought a pc without os installed, then bought an oem server license, where do I get the activation key from?

Read other answers
RELEVANCY SCORE 58

Hi,

I have one machine running Windows XP and I am unable to make a connection via RDP to Windows Server 2016.
I have managed to make successful connection to Windows 2012 and even Windows 10 with latest build.

I have edited these registry keys
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa 
-adding tspkg
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders 
-adding credssp.dll
Also updated RDP client on winXP to 7.0 enviroment

I have tried 2 different machines with 2016 system.
The connection is not refused by any error (EventViewer is empty on both machines). RDP ask for credentials and then show message "Cant connect to the remote computer try it later" 
Do you have any ideas how to solve it ? 

Thanks for any help

Read other answers
RELEVANCY SCORE 57.6

I was wondering if there are any known issues or any compability problems if I want to run windows 2016 Server on a Lenovo ThinkPad T480 20L5. It's meant to act as a probe to monitor traffic in a server room but needs to be small and mobile. Hence my question. Thanx =) Magnus

Read other answers
RELEVANCY SCORE 57.6

I needed to install .NET 3.5 on Server 2016 but have hit all of the roadblocks and need help. Here is what I have tried so far...

I tried to add the feature via the server manager but it ended with code 0x80070002. I did have to provide a path to the sources\sxs folder for the cab file which I expected but that didn't help.I tried using the DISM powershell command to add the feature, both using the source location and also using /All so that it downloads the files from Windows Update. The end result was the same as #1 attempt - 0x80070002.I made sure all updates for the OS have been applied and that updates for 'other Microsoft products' was checked. this made no change in the error.I checked the installed packages via powershell and it shows 3.5 as removed, which again is expected for Server 2016 as they intentionally left it out but provided the cab file in the install media.I have executed a clean sfc /scannow with no errorsI have run a clean dism package commandI have tried installing under a fresh admin user profileI have researched for around 3 hours on the forums so I look forward to the various input
I have uploaded both the DISM and CBS logs. I started fresh with both logs so they contain only details related to a single attempt t install via the server manager.
https://my.pcloud.com/publink/show?code=kZQe4C7ZwcQKz9V82K06TsgYsl0DqkNg3wh7
Thanks for the help!

Read other answers
RELEVANCY SCORE 57.6

Hi,
My objective is to run the tool and analyze the security and software patches on server or computer and produce a list of recommended install.
I read that MBSA (https://docs.microsoft.com/en-us/windows/security/threat-protection/mbsa-removal-and-guidance) only supports up to Windows Server 2012R2.
Is there any tools that support Windows Server 2016 ?
I used WUA and it can't run on some of the computer.
https://docs.microsoft.com/en-us/previous-versions/windows/desktop/aa387290(v=vs.85)
Then, explore Microsoft Security Compliance Toolkit 1.0 but lack of instruction. Not sure it can do the job or not.

https://www.microsoft.com/en-us/download/details.aspx?id=55319
Do you have any recommendation on how I can get started ? Thanks.

Read other answers
RELEVANCY SCORE 57.6

Dear IT Pros,
I have 2 questions that need your help and professional advice.
1) Does Microsoft has a tool to check whether a patch (KB) was superseded by another KB? In my case, I'm trying to search whether this KB4022715 and KB4025339 (both of this KB was released in 2017) was superceded
by another KB. This is because a security consultant has advised us to install both of this KB to prevent vulnerabilities but since it was released back in 2017, I suspect there must be a newer KB that supercedes it
2) Can advice what KB I need to download regarding this 2 bulletin ID CVE-2017-5715 and CVE-2019-11135? Can't seem to find it after much googling

Thanks in advance for the help

Read other answers
RELEVANCY SCORE 57.2

Every 5 minute two  vmg.temp files are creating into windows 2012 standard Hyper V base server, please help ..

Read other answers
RELEVANCY SCORE 56.8

We have a 2016 server and BITS service getting stopped automatically after 2 minutes, We have done the troubleshooting like restore system health, sfc
/scan now and rename the software distribution and cat root but issue still same?

Read other answers
RELEVANCY SCORE 56.8

I am getting this error on one DC, not alot out there that I can find on this error.


Faulting application name: mmc.exe, version: 10.0.14393.953, time stamp: 0x58ba5cff
Faulting module name: GPOAdmin.dll, version: 10.0.14393.1066, time stamp: 0x58d9f2af
Exception code: 0xc0000005
Fault offset: 0x00000000000be1c6
Faulting process id: 0x1120
Faulting application start time: 0x01d2b9ddb96a8ddb
Faulting application path: C:\Windows\system32\mmc.exe
Faulting module path: C:\Windows\System32\GPOAdmin.dll
Report Id: 72683f7e-ea63-4447-8373-4e7c2c33e883
Faulting package full name: 
Faulting package-relative application ID: 

Read other answers
RELEVANCY SCORE 56.8

I have been trying for hours and cannot figure out how to setup, and configure the FTP properly. Anyone help?
 

Read other answers
RELEVANCY SCORE 56.8

Download: Windows Server Technical Preview | TechNet Evaluation Center

Release Notes: Release Notes: Important Issues in Windows Server 2016 Technical Preview

Changelog: What's New in Windows Server 2016 Technical Preview 4

I may gonna test it out inside VMware
 

Read other answers
RELEVANCY SCORE 56.8

Not able to Install OS on HP Proliant DL20 Gen 9 Server, HDD not detected in Logical Drive..

Read other answers
RELEVANCY SCORE 56.8

I am currently having an issue were Windows 7 computers can not connect to Server 2016 (domain). Right away I get a "The logon attempt failed".
I know that user information is correct, because I can connect using any Windows 10 computer. I have tried this from multiple Windows 7 computers, they all give the same error. I don't have any problems at all with Windows 10.

So, this seems to be isolated to Windows 7.
Has anyone seen this or know how to get around this issue?

I appreciate your help!
 

Read other answers
RELEVANCY SCORE 56.8

Buen dia, estamso configurando nuestro sistemas en web nos están pidiendo reinstalar IE11 en WS2016, el problema es que no encontramos donde puede estar esta opción y en internet no hay información al respecto........

Read other answers
RELEVANCY SCORE 56.8

Hi there,
I am currently testing the working of Microsoft Advanced Threat Analytics. I have two virtual machines running windows server 2016 TP4. One VM for ATA Center, Second for Gateway. All the prerequisite steps are configured and port mirroring is working fine.
When i try to install Center setup the message come that " The specified Program requires newer version of windows"

I want to know that does Microsoft ATA supports windows server 2016?
Regards,
Pratik

Read other answers
RELEVANCY SCORE 56.8

Hi, we are becoming more and more frustrated with the forced windows updates. These may help home users but professional products like servers are not for everyday users and sometimes require alot of configuration to get legacy applications to work.
Windows will at times force updates no matter what we choose in respect to disable them. It is NOT up to Microsoft to determine if or when the servers I am responsible for need to be patched. Any reading and research we have done here has only yielded the
ability to prolong the updates. Once installed over 50% of the servers give an endless spinning circle and require restore or rebuild, this has become unacceptable and has forced us to start testing our applications with different Linux flavors.

Is there a way to STOP the updates indefinitely?

Read other answers
RELEVANCY SCORE 56.8

Source One: System Center 2016 to launch in September

"We are pleased to announce that Microsoft System Center 2016 will be launched at the Microsoft Ignite conference in late September."​
Source Two: Windows Server 2016 new Current Branch for Business servicing option

"Windows Server 2016 is the cloud-ready operating system that delivers new layers of security and Azure-inspired innovation for the applications and infrastructure that power your business.

New capabilities will help you:

Increase security and reduce business risk with multiple layers of protection built into the operating system.
Evolve your datacenter to save money and gain flexibility with software-defined datacenter technologies inspired by Microsoft Azure.
Innovate faster with an application platform optimised for the applications you run today, as well as the cloud-native apps of tomorrow.
Windows Server 2016 includes 3 main editions:

Datacenter: This edition continues to deliver significant value for organisations that need unlimited virtualisation along with powerful new features including Shielded Virtual Machines, software-defined storage and software-defined networking.
Standard: This edition is ideal for organisations that need limited virtualisation but require a robust, general purpose server operating system.
Essentials: This edition is designed for smaller organisations with less than 50 users.
These editions will be available for purchase on the October 2016 price list... Read more

A:Windows Server 2016 to launch in September

Nice share @Huracan wonder if it is going to be more secure than Windows 10.
 

Read other 1 answers
RELEVANCY SCORE 56.8

Is there a Servicing Stack Update that I can use for my version of Server 2016? I only see updates for ver 1903 & 1909. Which update should i use?

Thanks!

Read other answers
RELEVANCY SCORE 56.8

Hi, I bought this laptop about 3 months back and recently I found that this wi-fi adapter is not connecting to wi-fi network @ 5 Ghz. Is this a problem with adapter itself as in - is this adapter capable of receiving wi-fi connection @ 5 Ghz and if so is there a problem with my laptop? ThanksMshetye













Solved!

View Solution.

A:Broadcom BCM43142 802.11 bgn Wi-Fi M.2 adapter

Hi: There is nothing wrong with the wireless card or your notebook. That model card is a single band 2.4 GHz only card. Hint:  Any time you see a card with a suffix of bgn, that means it is a single band card. Dual band cards have a suffix of abgn or agn. Unfortunately, it looks like it is very difficult to replace the wireless card in your model, or I would have recommended that you replace the card with a dual band model that has bluetooth. Plus doing the job yourself would void the warranty according to the manual on the user guides section for your notebook.    

Read other 4 answers
RELEVANCY SCORE 56.8

Hello. First time. Installed Windows 7 on two home-network computers. Everything appeared to be good, including networking, but I could not access printers (linked through each computer) with the opposite computer. Windows update offered an update for the Broadcom 802.11n network adapter, but when I installed the update I completely lost the network. I had to revert to the old driver in order to reestablish the network. But the printers still are not recognized. The network adapter on the secondary computer is a Linksys WMP300N.

I did try turning the router off for ten seconds with the updated driver but that had no effect.

Anyone had this problem? TIA

A:Broadcom 802.11n network adapter

I had the same thing happen, but with a windows update of the driver. I also was able to recover by rolling back the driver in the device manager. The update was dated, but I did not think to note it before I reverted. It was not in my update list a few weeks ago.

Read other 2 answers
RELEVANCY SCORE 56.8

  When I purchaed my 3 laptops from HP, One of the reasons I bought them was that is said they had the Broadcom 802.11n Network adapter.  When I pull up network properties it shows connect using Broadcom 802.11n Broadcom network adapter. If you select that and hit the configure button and then details does it show the Broadcom BCM43142 802.11 bgn Wi-Fi M.2 Adapter.  Why the subversion from HP is this major detail hidden in the weeds?

Read other answers
RELEVANCY SCORE 56.8

help me to solve the problem. on first it can connect and detect my wifi but after a month it will will functioning well. can you gave me a hint.   thats the same problem in 1yr of  using of it. 3x formated to windows 7 64bit. at first okie in wifi. then will stop after a month

Read other answers
RELEVANCY SCORE 56.8

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 1
Processor Count: 2
RAM: 1981 Mb
Graphics Card: NVIDIA GeForce Go 6150 , 64 Mb
Hard Drives: C: Total - 144247 MB, Free - 54438 MB; D: Total - 7317 MB, Free - 418 MB; F: Total - 1059 MB, Free - 692 MB;
Motherboard: Quanta, 30BF, 69.2E, None
Antivirus: BitDefender Antivirus, Updated: Yes, On-Demand Scanner: Enabled

I have a HP Pavillion tx1210us laptop running Vista Home Premium 32bit.

I was using my WiFi without problems for months with IE8, then suddenly last week I have no WiFi connection. My Network Connection did not list any WiFi adapters. I ran the Network Connection diagnostic program and it said "no wifi adapter recognized or configured" ... or something like that. In the Programs and Features area I list the Broadcom 802.11 Wireless LAN adapter, but the Broadcom 4321 AG 802.11 a/b/g/draft-n Wi-Fi adapter is missiing in Device Manager. Both my 6TO4 Adapters have yellow triangles w/ !'s inside. All drivers are up to date.
I tried uninstalling the Broadcom 4321 WiFi adapter and reinstalling it. I removed my Bit Defender antivirus program completely. Nothing fixed it. I restored my computer to a point listed as one week ago which fixed it once for that session, but when I rebooted my computer, I was without the WiFi adapter again. After... Read more

A:No WiFi Broadcom adapter with IE8

Read other 9 answers
RELEVANCY SCORE 56.8

is it true that this wlan adapter does not comply with 802.11 ac? supoosedly my notebook 15-ak030nd should have 802.11a/b/g/n/ac (1x1). My fritzbox does not seem to think it has, nor do I see any indication in the specifications of the card

A:Broadcom BCM43142 802.11 bgn Wi-Fi M.2 Adapter

Hi: The Broadcom BCM43142 802.11 bgn Wi-Fi M.2 Adapter is a single band wireless N card with bluetooth. No AC capability. But I agree that either the product specs for your model are incorrect, or HP stuck the wrong card in your notebook. If the specs are correct then you should probably have gotten the Intel 3165 802.11a/b/g/n/ac (1x1) and Bluetooth® 4.0 combo. I looked up the parts list for your model, but there is no info provided when I enter the product number. http://partsurfer.hp.com/Search.aspx?SearchText=P0U53EA I suggest you contact HP and get a definite answer as to what wireless card your notebook should have. 

Read other 4 answers
RELEVANCY SCORE 56.8

When I purchaed my 3 laptops from HP, One of the reasons I bought them was that is said they had the Broadcom 802.11n Network adapter.  When I pull up network properties it shows connect using Broadcom 802.11n Broadcom network adapter. If you select that and hit the configure button and then details does it show the Broadcom BCM43142 802.11 bgn Wi-Fi M.2 Adapter.  Why the subversion from HP is this major detail hidden in the weeds?

Read other answers
RELEVANCY SCORE 56.8

Hello, I was unable to find the detailed specs - what kind of broadcom adapter exectly does 7070t have? It should be like BMCXXXXXX or something like that -trying to update through microsoft update catalog, but need the model for that. thnx

Read other answers
RELEVANCY SCORE 56.8

I got this laptop, and no matter what I do I cant get the Broadcom BCM43142 802.11 bgn Wi-Fi M.2 Adapter to work. I have tried install the drivers but it still says no connection,  I cant even get it to work, any help. I cant even do a system restore

Read other answers
RELEVANCY SCORE 56.8

Hello
I am not having network issues but, when I run Macrium Reflect it says, "Click here to update the network adapter."

It seems to sense my network adapter is not adequate to use a network if I were to choose to do so.

Is this an indication my Windows 10 Pro has a driver that needs updating although I do not use a network for Macrium?
TY
Peter
I went to Broadcom but the driver was for Win 8. I tried to update in device manager but it said I have the latest driver.

A:Broadcom network adapter 802.11n

Originally Posted by maranna


Hello
I am not having network issues but, when I run Macrium Reflect it says, "Click here to update the network adapter."

It seems to sense my network adapter is not adequate to use a network if I were to choose to do so.

Is this an indication my Windows 10 Pro has a driver that needs updating although I do not use a network for Macrium?
TY
Peter
I went to Broadcom but the driver was for Win 8. I tried to update in device manager but it said I have the latest driver.




Hi there.

I doubt whether that's a Windows problem -- when running Macrium reflect though it depends on whether you are using a stand alone version in which case if you want to have network connectivity it may need to load extra drivers.

For example I had to load RAID driver software on to my copy of the bootable Macrium software so it could recognize my HDD's -- no probelm usually though.

If you don't need connectivity to a network when taking backups just ignore message.

Cheers
jimbo

Read other 1 answers
RELEVANCY SCORE 56.8

Hi I recently was using my laptop and when i put it on sleep mode and when i put it back to regular mode I notice my Wifi Connection was down.. (i didn't install or do anything to it. So im thinking its my laptop wifi Broadcom 802.11 Network Adapter Driver stops working..) then after another restart.didn't go well. i try to reinstall it with recovery manager that didn't work then I check to see if its any important updates I actually see one called. Called Broadcom Network Broadcom 802.11b/g WLAN and I got it the update and during the update it still didnt work and the how am i getting it is by missing with it i will keep trying to install the Broadcom 802.11 Network Adapter Driver and sometimes it will work and I got my connection after the 4th restart.. anyways now it stop working

im running on

HP Pavillion dv9000
32-Bit Operating System
Processor AMD Turion(tm) 64 X2 Mobile Technology TL-50- 1.60.Ghz

Any help will be very much appreicated :| I need to do a report (In a Internet Caffee)

HELP PLEASE!
 

Read other answers
RELEVANCY SCORE 56.8

Hello, I am helping a friend with an issue on their HP Pavilion dv9410us running Vista 32 Home Premium. Basically, their wireless adapter is working inconsistently. Sometimes, when you pull up the Device Manager, the adapter is listed, but sometimes it is not. There is an on/off switch which has an orange indicator when the adapter is off, and a blue light when it is on. When the device is not listed, the light remains orange no matter how you turn the switch. Also, the tray icon for wireless networks will vanish completely when the adapter is not detected. 90% of the time, the computer simply appears to have no LAN adapter installed, but the rest of the time, it works without issue. Sometimes restarting the computer will help it, but generally it seems to come and go as it pleases. It's the factory adapter, I know it's a Broadcom, but not sure of a model number. I've tried reinstalling the drivers to no avail. I installed an external USB adapter and it works fine, but they are a nuisance and certainly not an ideal solution. Does anyone have any suggestions or am I missing anything obvious?

Thank you in advance!

A:Integrated Broadcom LAN adapter comes and goes?

Have you tried removing the device via Device Manager...and then reinstalling it with the appropriate HP drivers?

Louis

Read other 3 answers