Over 1 million tech questions and answers.

Problem with wifi, stop working

Q: Problem with wifi, stop working

Hi,
I have an Acer aspire 5750G i3 2.10Ghz etc.
This week i have a problem with my wifi connection.
The problem starts with a strange noise from the speakers and then the wifi stop working..... BUT when i go at black screen or at sleep mode the wifi works fine! After 3-4 seconds stop working again...
i have searched at google for solutions but nothing, so i tryied to fix it by myself.
I have done format but the problem exists !!!!!!!!!
so i opened the case... but inside its fine... all the cables are correct connected and .... the problem exists....
Can you help Me????? I dont know what else to do!!!!

RELEVANCY SCORE 200
Preferred Solution: Problem with wifi, stop working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Problem with wifi, stop working

Start over fresh to run Acer Restoring a system to factory load

or get the superior Clean Reinstall - Factory OEM Windows 7 following the steps closely especially about how to handle drivers in win7.

Read other 9 answers
RELEVANCY SCORE 58

Hey guys, got a macbook pro(running win7 bootcamp) and a pc desktop at home, and both wifi stop working yesterday, not sure whats going on, My iphone & powerbook can pick up my Wifi network just fine.
I have a cable modem box hooked up to a Dlink DI 614+. Im in my Dlink router config page, everything is still the same, wireless still enabled, password is still set. in the system tray, the wireless connection box doesn't show any wireless network, not even my neighbors. I tried manually adding the Wifi network in the Wireless connection network menu, but it doesn't seem to do anything. A few days ago i did try to network share my macbook pro with my desktop(which i did get working) not sure if that might have caused the wireless failure. But it is odd that the pc and macbook pro now stop working, but the powerbook is fine.
any suggestions ?

thanks.

A:WIFI stop working - d-link DI 614+

  
Quote: Originally Posted by hastyle


Hey guys, got a macbook pro(running win7 bootcamp) and a pc desktop at home, and both wifi stop working yesterday, not sure whats going on, My iphone & powerbook can pick up my Wifi network just fine.
I have a cable modem box hooked up to a Dlink DI 614+. Im in my Dlink router config page, everything is still the same, wireless still enabled, password is still set. in the system tray, the wireless connection box doesn't show any wireless network, not even my neighbors. I tried manually adding the Wifi network in the Wireless connection network menu, but it doesn't seem to do anything. A few days ago i did try to network share my macbook pro with my desktop(which i did get working) not sure if that might have caused the wireless failure. But it is odd that the pc and macbook pro now stop working, but the powerbook is fine.


any suggestions ?


thanks.


In general these types of problems can be fixed by resetting the router. After resetting the router you will need to go through the routers set up page and enter your SSID, password, and other wireless connection settings.

Read other 4 answers
RELEVANCY SCORE 58

So I have a computer I built and have an intel centrino advanced N 6205 wifi thing. My wifi is usually fine, but randomly my wifi will completely stop working and I'll pretty much just have to wait until it comes back. I used the intel diagnostic thing and it failed the ping test giving the error no response: default gateway, DHCP server.

Is there anything I can do to try to fix this problem?

edit: also I'm on windows 7

also I notice this usually when I'm playing csgo but it happens other times as well.
 

Read other answers
RELEVANCY SCORE 57.2

Hi,
my wifi stops working at random times on my win 8.1, maybe once a week. The same thing happens with headphone jack, usually not at the same time. It takes about 5 reboots to get them to work after that, which gets really annoying.
When that happens, I can't see any wifi network around me, and the headphones work on any other device.

I doubt this is about drivers, since it's two different drivers we're talking about.

A:Wifi and audio stop working randomly

Can you run and download auslogics driver update I ran it on mine and it found 4 drivers out of date and found the right drivers and updated them I have since brought the program along with boost speed and now it runs in the back ground keeping my drivers up to date

Read other 2 answers
RELEVANCY SCORE 57.2

Windows 10 Enterprise version 1709We deployed the machine using SCCM and a WIN10 .WIM for 1709.The machine boots up and works ok but I noticed after 2-30 minutes the Wifi is disabled and the keyboard stops working (they always quit working together). So then I figured I'd run Lenovo System Update.I downloaded and installed all the critical, optional, and recommended updates (about 4 drivers). After restart (and hard reset with button on the bottom of the chassis) this issue still persists.  I'll be typing and then it stops working, at the same time wifi gets disabled. When I click on the Wifi icon (marked Turned OFF by the OS) nothing happens.  I can toggle airplane mode on and off by wifi will no longer toggl.  I have to restart the machine. The touchpoint, touchpad, and USB connect mouse continue to work during this time.

A:X1 Carbon 6th keyboard and wifi stop working

For whatever reason, it appears this machine will run longer successfully on battery.  When it is plugged in the error comes sooner.  Sometimes the error is there after reboot (either returns very fast or never went away, not sure). 

Read other 1 answers
RELEVANCY SCORE 57.2

hello guys, i just got this model Aspire V3-371-56TX and i have 2 qustions 1) it have this wireless card: Intel(R) Dual Band Wireless-AC 7265running windows 10, from time to time, sometims i power on the laptop, its seems like it dosnt recognize any wifi networks, and even more it even dont have wifi card, i've looked in the network adpters, and no wifi adepter, only wired one. after few rrestart the problome is solve, and it recognize again the wifi adpter and i'm able to connect to wifi networks, i've already update the BIOS to newest edition, and the installed the latest driver for the wifi card.and still this problomes reapt from time to time, any suggstion ? 2) does anybody know if this model suppurt SDXC cards? i've try to google it, find many diffrent answer some say only SDHC some say also SDXC, what is the real answer? thank you.   










Solved!
Go to Solution.

A:Aspire V3-371 - WIFI ADAPTER STOP WORKING - DOES I...

There is a Wifi issue with Windows 10. On some laptops,Windows 10 will install the wifi driver it wants, whether it works correctly or not, and won't allow you to change it.

Read other 7 answers
RELEVANCY SCORE 57.2

hello guys, i just got this model Aspire V3-371-56TX and i have 2 qustions 1) it have this wireless card: Intel(R) Dual Band Wireless-AC 7265running windows 10, from time to time, sometims i power on the laptop, its seems like it dosnt recognize any wifi networks, and even more it even dont have wifi card, i've looked in the network adpters, and no wifi adepter, only wired one. after few rrestart the problome is solve, and it recognize again the wifi adpter and i'm able to connect to wifi networks, i've already update the BIOS to newest edition, and the installed the latest driver for the wifi card.and still this problomes reapt from time to time, any suggstion ? 2) does anybody know if this model suppurt SDXC cards? i've try to google it, find many diffrent answer some say only SDHC some say also SDXC, what is the real answer? thank you.   










Solved!
Go to Solution.

A:Aspire V3-371 - WIFI ADAPTER STOP WORKING - DOES I...

There is a Wifi issue with Windows 10. On some laptops,Windows 10 will install the wifi driver it wants, whether it works correctly or not, and won't allow you to change it.

Read other 7 answers
RELEVANCY SCORE 57.2

I bought a notebook HP Pavilion G4 2260-br, that came with Windows 8. It worked fine until some Windows Update that made the keyboard stop working when I turn on the wifi (Actually it is not the whole keyboard, its the backspace, enter and space keys). If a turn off the wifi all the keys start working. Tried to:1 - Get to a previously backup restoration (the problem persisted)2 - Update to Windows 10, using offical methods (the problem persisted)3 - Downgrade to Windows 7 (x32 and x64) with a valid serial key (the problem persisted)4 - In Win 7 (x64) downloaded all the drivers and installed manually (the problem persisted)5 - In Win 7 (x64) downloaded the older versions avaiable (the problem persisted) To garantee that the problem isnt in the hardware, booted with a Linux in pendrive and ALL the keys works fine with WIFI ON or OFF. Anyone has the same issues?

Read other answers
RELEVANCY SCORE 56.8

left my computer home with cousin came back with the wifi saying disabled while its connected to my router (internet is not working) [IMG][/IMG]

Heres more information
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Janica>ipconfig/aa

Error: unrecognized or incomplete command line.

USAGE:
ipconfig [/allcompartments] [/? | /all |
/renew [adapter] | /release [adapter] |
/renew6 [adapter] | /release6 [adapter] |
/flushdns | /displaydns | /registerdns |
/showclassid adapter |
/setclassid adapter [classid] |
/showclassid6 adapter |
/setclassid6 adapter [classid] ]

where
adapter Connection name
(wildcard characters * and ? allowed, see examples)

Options:
/? Display this help message
/all Display full configuration information.
/release Release the IPv4 address for the specified adapter.
/release6 Release the IPv6 address for the specified adapter.
/renew Renew the IPv4 address for the specified adapter.
/renew6 Renew the IPv6 address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns R... Read more

A:Wifi on Laptop just stop working more details in thread

swicth on the button on the laptop that says "WLAN"

Read other 1 answers
RELEVANCY SCORE 56

I have faced issue with notebook keyboard(HP-15r062tu notebook) after cleaning with Electronic Liquid cleaner. Afterward my keyboard stop working. After non usage for more than 7 days the keyboard working again when . I reinstalled window 7 OS. But, when going to installed Bluethooth & wifi adaper driver the keyboard stop working. Even a single key of keyboard non working. Afterward i again uninstalled Bluethooth & wifi adapter driver it works again well. Even when i disable the bluethooth form device manager keyboard working very well. How to Fix this issue. Is that any software or hardware problem?

Read other answers
RELEVANCY SCORE 55.6

Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260

Hi guys,
since some days my wifi has stopped working.
If I click on Wifi icon it shows only ONE (max two) NETWORK:

And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right)
If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks:

My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".
The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).

I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.
I've already tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.

I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.

The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).

This is not related to a ne... Read more

A:Wifi stop working. Win10 shows only one network and it doesn't connect

I did a restore factory with HP recovery (I've a dedicated drive for it) and....it worked!
I had to upgrade Win8.1 to 10, but the Wifi problem is solved!

I'm still guessing which was the problem...
Now I'm running Intel drivers ver. 18.30.0.9 and all the networks are working.

In the next days I'm trying to check the linux problem (the factory reset deleted Elementary partition).

Read other 0 answers
RELEVANCY SCORE 55.6

Hey there,

Have been having this problem for a while. I'll try to make a long story short. I'm on a personal build computer running x58 chipset. Originally installed Windows 7. Have upgraded to 8, 8.1, 10, and then 10 anniversary addition.

The problems started once I upgraded to Windows 10.

When the computer goes idle for the day (leave for work, come home later in the day) the desktop, which is connected via ethernet, has lost it's connection and will only come back after a reboot. Troubleshooting doesn't work, and trying to disable and re-enable the NIC card doesn't work.

Once the desktop loses its connection, every device that is connected via wifi will show that it is connected, but will not load anything. As soon as I reboot the desktop, everything works fine. I DO NOT need to reboot the modem or router.

I have searched over and over and over, and have determined it is not a modem problem(comcast eMTA, in bridge mode), or a router problem (Asus RT-AC68P) so it must be a driver problem for my NIC card. I cannot for the life of me find a Marvell Yukon 88E8056 windows 10 supported driver to see if that is the issue. Maybe there are settings in the NIC card properties I need to change?

Any help would be appreciated.

Read other answers
RELEVANCY SCORE 55.6

Hello-
 
I am getting blue screen of death's all the time.  ALso my wifi will always go offline, and it takes 2 or 3 resets to get it back on.  Computer isn't really running that sluggish and it's relatively fine otherwise.  Sometimes the BSOD will be as soon as I boot up. Sometimes I will get it at totally random times.  The error message that it gives me is always different, not the same at all.
 
Here is the FRST file (Additions attached):
 
Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version:07-02-2016
Ran by Ryan (administrator) on LAPTOP2 (12-02-2016 14:00:46)
Running from C:\Users\Ryan\Desktop
Loaded Profiles: Ryan (Available Profiles: Ryan & Malachite)
Platform: Windows 8.1 (X64) Language: English (United States)
Internet Explorer Version 11 (Default browser: Chrome)
Boot Mode: Normal
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
 
==================== Processes (Whitelisted) =================
 
(If an entry is included in the fixlist, the process will be closed. The file will not be moved.)
 
(Intel Corporation) C:\Windows\System32\igfxCUIService.exe
(Realtek Semiconductor) C:\Program Files\Realtek\Audio\HDA\RtkAudioService64.exe
(Realtek Semiconductor) C:\Program Files\Realtek\Audio\HDA\RAVBg64.exe
(Emsisoft Ltd) C:\Program Files\Emsisoft Anti-Malware\a2service.exe
(Privacyware/PWI, Inc.) C:\Program Files (x86)\Pri... Read more

A:I am getting blue screens of death constantly, wifi will randomly stop working

Press the windows key + r on your keyboard at the same time. This will open the RUN BOX.Type Notepad and and click the OK key.Please copy the entire contents of the code box below to the a new file. 
Start

CreateRestorePoint:
EmptyTemp:
CloseProcesses:
cmd: ipconfig /flushdns
cmd: IPCONFIG /release
cmd: IPCONFIG /renew

[B]Winlogon\Notify\SDWinLogon-x32: SDWinLogon.dll [X]
CHR HomePage: Default -> hxxp://www.startpage.com/
CHR StartupUrls: Default -> "hxxps://startpage.com/","hxxp://www.google.com"
CHR DefaultSearchURL: Default -> hxxps://startpage.com/do/dsearch?query={searchTerms}&cat=web&pl=chrome&language=english
CHR DefaultSearchKeyword: Default -> startpage.com
CHR Extension: (Flash Video Downloader) - C:\Users\Ryan\AppData\Local\Google\Chrome\User Data\Default\Extensions\aiimdkdngfcipjohbjenkahhlhccpdbc [2016-01-23][/B]
C:\Users\Ryan\AppData\Local\Google\Chrome\User Data\Default\Extensions\aiimdkdngfcipjohbjenkahhlhccpdbc

End
Save the file as fixlist.txt in the same folder where the Farbar tool is running from.The location is listed in the 3rd line of the Farbar log you have submitted.Run FRST and click Fix only once and wait.Restart the computer normally to reset the registry.The tool will create a log (Fixlog.txt) please post it to your reply.===Please download AdwCleaner by Xplode onto your Desktop.Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click the Scan button and ... Read more

Read other 4 answers
RELEVANCY SCORE 48.4

Hi I recently ran memory diagonistic tool and also timing
a boot time with .vbs file and after this
my computer booting speed became fast, but now when I try to
play online game explorer stopped working message is keep popping up
and I had this problem when I first got my laptop.
I researched and adds-on might cause this problem.
But I'm not sure what casue this problem right now.
Also I dowloaded microsoft word viewer casue I needed it wuickly.
So after I downloaded the viewer I had 6 windows updates that are
related to this program. Do u guys think this caused the problem?

I checked some tips how to speed up my laptop's performance
I saw "how to Enable or Disable the Receive Window Auto Tuning Level in Vista"
and I saw that the auto tuning was highly restricted (see the attachment). Does this prevent the internet go slow? cause i'm having problems where I can't load some videos fast.


plz help guys.

A:problem with explorer stop working

If the problem happened immediately after the word viewer, I would say that there is chance that is the problem.

To find out, you can make a system restore point, now. Then go back to the point prior to the installation. If things work its the viewer.

When you get the results of the system restore, we can discuss this further. We will know more and will be able to give you more help.

Read other 6 answers
RELEVANCY SCORE 48

Then I play BF3 I get ERROR "A problem caused a program to stop working" and I don't know that to do. All my drivers are installed. New PC, new windows 7 64xbit.
Processor : Intel core i5 3.3 Ghz, Video card GeForce GTX 460, Memory 4 Gb.
Please help Me.

Thanks.

A:A problem caused a program to stop working BF3

Benas,

* Your problem may be caused by many things > RAM problems >graphics drivers > overclocking > heat issues > using more than one AntiVirus at the same time > etc etc.

* If overclocking, restore to original

*Any BSOD DMP files produced?
If so we need them to enable us to assist you with your computer's symptoms.

* Have you any System Restore points created PRIOR to this happening?

*Safe Mode
Start your computer in safe mode

* How to Repair Windows 7 System Files with System File Checker
SFC /SCANNOW Command - System File Checker

* Then run checkdisk (chkdsk).
Disk Check

FYI...
Event ID: 1000

Let us know how you go please.

Read other 9 answers
RELEVANCY SCORE 48

Hello

Could you please guys help me with this ?

I reinstalled twice fresh windows 7 install to get rid off this problem , but couldn't.I switch programs on , then after 10-15 sec says " A problem caused the program to stop working" .... and it shuted down the softwares, but pC still works fine , no BSOD whatsoever...

I think I have did as it suppose do be done with my system...All drivers installed in proper way.. Windows 7 ultimate 64 bit, all drivers up to date ....

I include errors and couple of warnings below


Code:
Faulting application name: QMPlayer.exe, version: 5.0.0.121, time stamp: 0x499ce5ce
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x07350048
Faulting process id: 0x15fc
Faulting application start time: 0x01ceaadb845ebb8c
Faulting application path: C:\Program Files (x86)\Quintessential Media Player\QMPlayer.exe
Faulting module path: unknown
Report Id: d4c9bca7-16ce-11e3-b8e4-0026832c2253
=============================================

The Apache service named reported the following error:
>>> httpd.exe: Could not reliably determine the server's fully qualified domain name, using 169.254.41.81 for ServerName .

===============================================

The program setup.exe version 14.0.4755.1000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action C... Read more

A:A problem caused the program to stop working.....

What is QMP and why are you using it? I sounds like the kind of dodgy player that sneaks viruses onto the PC. I would only use WMP, QT, or for codecs they won't play use VLC open-source. These are the most highly regarded players.

When you say you've reinstalled repeatedly, how close did you come to a perfect install which is the same as for Clean Reinstall - Factory OEM Windows 7 Did you boot the installer to delete all partitions during install, the most basic step to getting a clean reinstall? If you're reinstall didn't measure up to the one in the link I'd redo it and stick with the tools and methods which work written there which work best for Win7,.

Read other 9 answers
RELEVANCY SCORE 48

I can do basic internet searches and watch videos and flash programs but I've been playing an online game called combat arms for about a month and all of the sudden one day I got an error message that said:
"A problem has caused the program to stop working"
Then I bought Civilization V and installed it and it installed with no problems but when I go to play it the same same message popped up. I've looked through a bunch of forums and noticed this has happened quite often but nothing anybody told other people has worked.
What is wrong and how do I fix it?

A:A problem has caused the program to stop working

Although you're not experiencing a BSOD issue, please post the information/reports detailed in this post: Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 48

I am new to the forum and hope that someone can help out. I run Windows 7 64-bit and everytime I open IE I get this message: "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". I click on okay and then click on retry whatever page I was on but the message comes up again and I have to close out explorer. I have tried going back in and even rebooting my system, but the messsage is almost continual. DEP is enabled and allows for exceptions but I don't know how to get it to work with explorer. Can anybody out there help me as this is getting incredibly frustrating

A:A problem caused the program to stop working

Hi there,

Seems like something in IE or some add-ons might have causing the problem. Follow this article How to reset Internet Explorer settings and see if that works. If not Run SFC /SCANNOW Command - System File Checker

Read other 1 answers
RELEVANCY SCORE 48

I open any program and everything seems OK, until I access the Menu button and right there I get the "A problem caused the program to stop working correctly"

For example: I open Adobe from a file whn I want to save it, I click on file and pop up tells me this program has failed.

This happens to Winrar, Adobe PDF reader, Paint and many other apps. Anyone is aware of the solution, or what causes this issue?

A:A problem caused the program to stop working

  
Quote: Originally Posted by chakubanga


I open any program and everything seems OK, until I access the Menu button and right there I get the "A problem caused the program to stop working correctly"

For example: I open Adobe from a file whn I want to save it, I click on file and pop up tells me this program has failed.

This happens to Winrar, Adobe PDF reader, Paint and many other apps. Anyone is aware of the solution, or what causes this issue?



Hi and welcome
You need to go into event viewer. type eventvwr in search. go to the windows log>application tab. You need to look for critical errors (the have red in the left hand column) that say app hang, app crash, etc.

When you find them use the snipping tool (type snipping in search) to make a screenshot of it
to upload it you use the attachment icon (shaped like a paperclip) on the reply form.

See pics

Ken J+

Read other 9 answers
RELEVANCY SCORE 48

Hi, just bought a new windows 7 laptop and after installing one of my CAD drawing software packages it keeps crashing, I've attached a couple of screen shots below, any advice would be appreciated.

Thanks in advance!

A:A problem caused the program to stop working

anyone?

Read other 2 answers
RELEVANCY SCORE 48

Trying to export some CAD files to PDF, but Adobe reader will not fire up properly, and I get the above error message. Can anyone help? I had earlier message say Abode was out of memory, but these seem to have gone.

A:A problem caused the program to stop working

Go to the Action Center-Maintenance-View Reliability History, look to see if you can find any reports of it in the graph, click on it, view the technical details, and see if it gives you any info on why it happened. Or look in the Event Viewer. Control Panel-Admin Tools-Event Viewer.

Read other 1 answers
RELEVANCY SCORE 48

I have a Dell Notebook a Studio 1555 running Vista SP2 on it. I've used the computer a long time and as far as I know nothing has changed as far as adding new hardware or installing new software.

When I boot up everytime after windows vista loads it get error messages that pop up and says, "itunes helper has stopped working, A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."

I get the same error everytime with Norton Internet Security, hpwuschd application, and google installer. THen the computer looks like its running okay, except those programs aren't running... THen as I'm working on the computer other applications give me the same thing.

The computer will not boot into safe mode it just locks up.

Help please.

A:A problem caused the program to stop working

Have you tried removing certain programs that continuously gives the stop errors? Have you tried running a clean boot in win vista?

Read other 1 answers
RELEVANCY SCORE 47.6

Hi,

First of all I guess I should point out that I know this is a bit of a strange request, but it's what my friend wanted lol.
I was asked by my friend to install xp on a new laptop he got because he wants to play an older game that he can't get working on win7.

The laptop is an Asus A54C. Everything was going fine and I managed to get xp installed and found drivers for most stuff, as the ones from the Asus website mostly didn't work.

Now the only thing I can't get working is the wifi, ethernet is fine but he said he needs the wireless.

Under the battery cover it says 802.11n PCIe minicard transceiver model number AR5B95. After searching around a bit I found what seems to be the right driver on an Atheros website so I tried to install that but it didn't work.

One of the downloads from the Asus website was called wireless console 3, and when I install that the wireless light on the laptop comes on and I can turn it off and on with the fn key, but I still don't get a wireless connection icon in the view network connections.

Does anyone have any ideas of anything else I could try or anything I may be doing wrong?

Thanks :-)

Also, forgot to say, in device manager I have two with exclamation marks, one says network controller and the other is PCI simple communications controller.

A:[SOLVED] Problem getting wifi working

Download and run the Intel Chipset Software Installation Utility (aka Intel INF Update Driver) from Intel's website. You should have done this BEFORE installing ANY device drivers. Here's the link http://downloadcenter.intel.com/Sear...amily=Software Products&ProductLine=Chipset Software&ProductProduct=Intel%c2%ae Chipset Software Installation Utility&more=20775 and also install Intel Rapid Storage technology Driver from the same website (will not solve the wifi problem, but it's one of the necessary drivers)

Read other 5 answers
RELEVANCY SCORE 47.6

Hi, I installed 64bit Windows 7 on my T500, and I'm having problems when connecting to wireless networks.Everything works fine with wired networks, but when I connect to a wireless network (any wireless network) DNS isnt working.I can ping and connect to websites using IP, but it refuses to resolve domain names. I have verified that the correct DNS servers are beeing used. I have installed all the drivers supplied by Lenovos system update + some beta drivers from http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html, but at this time I'm no longer sure what drivers are beta and whats release. Software & drivers installed:Access Connections version 5.42 build 6JC725WWRealtek 11b/g/m Wireless LAN Mini-PCI Express Adapter II (driver version 2007.2.1103.2009)Microsoft Virtual WiFi Miniport Adapter (driver version 6.1.7600.16385 Anyone know what this could be? Thanks,Trygve













Solved!

Go to Solution.

A:WiFi problem - No internet / DNS Not working

Hi Trygve,I have encountered the same problem and while I do not know the cause I have been able to get it working.  btw - I have tried both WIndows 7 x64 wireless manager and Access Connections and both result in the same DNS error - so my assumption is it is inherent in WIndows 7.Anyway- disconnect from the access point.- run command line from either the Start - Run command and typing "CMD" or from All Programs - Accessories - Run - "CMD"- type "ipconfig /flushdns" at the cursoryou should get a notice telling you the flush was successfulclose the Command windowReconnect with the wireless access point.That should work -It appears to be random - I move around a lot and it does not always occur.  The seems like there may be a correlation with resuming from standby but so far not sure. Thanks,Jeff  

Read other 9 answers
RELEVANCY SCORE 47.6

ok the only things that really works is firefox..IE dosent work i click it but nothing pops up.I ran CleanMyPc and found over 800 errors.When i clicked fix it a windows poped up and said this "A problem caused the program to stop working correctly.Windows will close the program and notify you if a solution is available"

I tried installing RegCure but it never open after installation is complete..i cant restore a back up cuz it wont let me.The only the only thing i can do is browse firefox.I cant even watch youtube cuz the sound dosent want to work.Im runnign out of option and i dont want to reset my pc PLEASE HELP!!!!

A:A problem caused the program to stop working correctly

can anybody please help me???

Read other 2 answers
RELEVANCY SCORE 47.6

I just recently did a system restore and now some software isn't loading properly. Here's the message from the Event Log:

Any Ideas?
Faulting application name: ProTools MP.exe, version: 9.0.0.62, time stamp: 0x4d70bea3
Faulting module name: MSVCR80.dll, version: 8.0.50727.6195, time stamp: 0x4dcddbf3
Exception code: 0xc000000d
Fault offset: 0x00046960
Faulting process id: 0xe84
Faulting application start time: 0x01ccc5a714c1e5c7
Faulting application path: C:\Program Files (x86)\Digidesign\Pro Tools\ProTools MP.exe
Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d09154e044272b9a\MSVCR 80.dll
Report Id: f2094338-319a-11e1-b00e-00241dc60918

A:a problem caused the program to stop working correctly

Hello weskoz, and welcome to Sevenforums!

Are you able to uninstall/reinstall it (Pro Tools MP from Digidesign)?

Read other 3 answers
RELEVANCY SCORE 47.6

Hi everyone I hope you can help me with this really frustrating problem.

About 6months ago I bought a new P.C with Vista Home Premium 32-bit preinstalled. It has worked fine but in the last few days I have finally gained access to the internet only to discover that I can't seem to install or download correctly.

For example I downloaded both the latest firefox and safari setup files but when I try to run them I get the following message instantly:



Now I have trawled google and other forums for a long time but can't seem to find a solution to the problem. I have set dep to allow these programs to run, and also disabled dep entirely but neither of these seems to work even though I have recieved dep realted error messages.

I have also tried running the programs as an administrator, and disabled windows defender, avg anti-virus and windows firewall. None of these solutions seem to work and there doesnt seem to be any other ideas anywhere else on the internet.

I also seem to have a problem downloading from IE7, when I click a download link a lot of the time either nothing happens or I see a window pop up and there disapear straight away, this is also very frustrating.

My P.C has the following spec:

Intel Pentium E2160 Dual Core Processor @ 3.0GHz
Asus P5K Motherboard
nVIDIA GeForce 8800GTS 320MB Graphics Card
2GB PC2-6400 DDR2 Memory

I will forever greatful if you can give me some advice, thanks a lot!

A:A problem caused the program to stop working correctly....

Hello and Welcome to TSF

The Firefox crashes article has some information and things to try.



Run the System File Checker
Click Start/ All Programs/ Accessories
Right click on the Command Prompt option, on the drop down menu which appears, click on the Run as Administrator option
If you haven?t disabled User Account Control (and you shouldn?t!) you will be asked for authorisation. Click the Continue button if you are the administrator or insert the administrator password.

Start the System File Checker

In the Command Prompt window, type: sfc /scannow, press Enter
You?ll see ?the system scan will begin?.

The scan may take some time and windows will repair/replace any corrupt or missing files. You will be asked to insert your Vista DVD if it?s needed.

Close the Command Prompt Window when the job is finished.

One caveat: you need a Windows CD or DVD to enable SFC to make repairs.

http://support.microsoft.com/kb/929833/en-us

Read other 4 answers
RELEVANCY SCORE 47.6

About 6months ago I bought a new P.C with Vista Home Premium 32-bit preinstalled. It has worked fine but in the last few days I have finally gained access to the internet only to discover that I can't seem to install or download correctly.

For example I downloaded both the latest firefox and safari setup files but when I try to run them I get the following message instantly:

Now I have trawled google and other forums for a long time but can't seem to find a solution to the problem. I have set dep to allow these programs to run, and also disabled dep entirely but neither of these seems to work even though I have recieved dep realted error messages.

I have also tried running the programs as an administrator, and disabled windows defender, avg anti-virus and windows firewall. None of these solutions seem to work and there doesnt seem to be any other ideas anywhere else on the internet.

I also seem to have a problem downloading from IE7, when I click a download link a lot of the time either nothing happens or I see a window pop up and there disapear straight away, this is also very frustrating.

My P.C has the following spec:

Intel Pentium E2160 Dual Core Processor @ 3.0GHz
Asus P5K Motherboard
nVIDIA GeForce 8800GTS 320MB Graphics Card
2GB PC2-6400 DDR2 Memory

I will forever greatful if you can give me some advice, thanks a lot!
 

A:A problem caused the program to stop working correctly...

Read other 10 answers
RELEVANCY SCORE 47.6

I setup program window live movie maker and save movie but has error follow attach files.

Window live movie maker has stoped working a problem caused the program to stop working correctly. Window will close the program and notify you if a solution is available.

A:a problem caused the program to stop working correctly.

Hi nuttyjoyoung,

Please see this thread on Microsoft Answers for more information: Windows Live Movie Maker has stopped working...

Cheers,

Walker
Windows Outreach Team

Read other 1 answers
RELEVANCY SCORE 47.6

I had updated Nokia Suite 3.7.22. However I have not been able to use program 'cos I get the message
" A problem caused the program to stop working correctly".
I have reinstalled and also ran system configuration disabling all services and start ups but still the problem reoccurs with every reboot. The last event log error is given as follows:
Faulting application name: NokiaSuite.exe, version: 3.7.22.0, time stamp: 0x50d48641
Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2be1e
Exception code: 0xc0000005
Fault offset: 0x00001ed7
Faulting process id: 0x1fb4
Faulting application start time: 0x01cdf7fcb43281e5
Faulting application path: C:\Program Files (x86)\Nokia\Nokia Suite\NokiaSuite.exe
Faulting module path: C:\Windows\system32\MSVCR100.dll
Report Id: f34da43c-63ef-11e2-ad50-002564dee369

Please help

Read other answers
RELEVANCY SCORE 47.6

Hi All,
I got this software for doing modelling one engineering work installed on my PC. One day after installation everything was smooth until the software could not be opened and this "A problem caused the program to stop working correctly" message appeared on the screen.

Could I get some light what is exactly happen here?? the program was just OK with windows 7

Thanks & Regards
Adrian

A:A problem caused the program to stop working correctly

Is the program Windows 8 compatible and is it the application or your browser giving you this message? Usually it is the browser that issues this message.

Read other 6 answers
RELEVANCY SCORE 47.6

Today I downloaded a game (Miss Management), I was ready to play so I clicked on the icon, then up came the Microsoft windows message, "A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". I am using vista 32 bit, I tried to modify DEP but it made no difference, maybe i didnt do it corectly. Any help is greatly appreciated as I want to fix this problem asap so I can play this game. If I have left any information out please let me know and I will add it.

Thank you all

Torrent, a friend recommened the game, I just wanted to see what the fuss was all about.

A:A problem has caused the program to stop working correctly...

From where did you download the game?

Read other 2 answers
RELEVANCY SCORE 47.6

Hi,

Got a problem when I open Adobe Photoshop CS5 Extended. An error message pops up and I can no longer use the software. Here's the detailed error message:

Adobe Photoshop CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

I followed one of the instructions in this Forums but seem to not getting any fix. I have attached one of the error I found in my system.

I am using Windows 7 Intel Dual Core 32 bit operating system. Please help. Hope you can help me.


Thanks
Bubbleslayer23

A:A problem caused the program to stop working correctly.

See if it works with a clean boot
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Read other 3 answers
RELEVANCY SCORE 47.6

This problem exists with only a handful of programs, the main one being Serif applications and in my case Serif Webplus X4 which is a cerified Windows 7 compatible program. For example; On successful installation I try to launch the program and the following box appears saying: Serif WebPlus X4 has stopped working. A problem caused the program to stop working correctly. Please close the program.

My system was upgraded from Vista Ultimate 32 bit to Windows 7 Ultimate.

System spec is as follows:

Processor: Intel Pentium 4 CPU 3.00GHz 2.99GHz
Installed memort (RAM): 4.00GB (3.50 GB usable)

Hope someone can help.

Thanks

A:A problem caused the program to stop working correctly.

  
Quote: Originally Posted by warreng


This problem exists with only a handful of programs, the main one being Serif applications and in my case Serif Webplus X4 which is a cerified Windows 7 compatible program. For example; On successful installation I try to launch the program and the following box appears saying: Serif WebPlus X4 has stopped working. A problem caused the program to stop working correctly. Please close the program.

My system was upgraded from Vista Ultimate 32 bit to Windows 7 Ultimate.

System spec is as follows:

Processor: Intel Pentium 4 CPU 3.00GHz 2.99GHz
Installed memort (RAM): 4.00GB (3.50 GB usable)

Hope someone can help.

Thanks


what does it say in event viewer? Type eventvwr in search. go to the windows log>application tab. Look for critical errors (they have red in the left column) . Look for errors that have app hang, or app crash, etc in them.

When you find them let us know the event ID and source codes.

Let us know if you need help
Ken

Read other 4 answers
RELEVANCY SCORE 47.6

Hi I?ma first timer

I amrunning 3 windows ten machines

1:Desktop PC ONE

A: Windows 10 pro

B: Version 11511

C: OS Build 10586.318

D: Product ID 00330-80000-00000-AA763

E: Processor AMD Athlon? II X4 630 2.80 GHz

F: Ram 4 GB (3.75 GB usable)

G: System Type 64-bit OS, x64-based processor

2:Desktop PC TWO

A: Windows 10 Home

B: Version 11511

C: OS Build 10586.318

D: Product ID 00326-10000-00000-AA093

E: Processor AMD A4-7300 APU with Radeon HD Graphics 3.80 GHz

F: Ram 4 GB (1.95 GB usable)

G: System Type 64-bit OS, x64-based processor

3: HP15 Notebook PC

A: Windows 10 Home

B: Version 11511

C: OS Build 10586.318

D: Product ID 00326-10000-00000-AA886

E: Processor Intel? Core? i3-4030U CPU @ 1.90 GHz

F: Ram 6 GB

G: System Type 64-bit OS, x64-based processor

I only get this error on the 1: Desktop PC ONE the other two run the program justfine and though I do not have the names and details on the other two windowsten machines the program runs fine on them as well.

I upgraded from windows 7 ultimate to windows 10 pro and ran the programsuccessfully for many months until one day I got ?pro... Read more

Read other answers
RELEVANCY SCORE 47.2

Hey ! I am facing trouble in switching in the Wifi as the slider present is not working ie. I am not able to slide it to switch it on after I once switched it off. I am not even able to switch it on with the help of keyborad.  Can you please help me out with this ? thank you. 

Read other answers
RELEVANCY SCORE 47.2

Good night, this problem is very annoying:
I bought Logitech Headset F540, when I connect the base to my computer with USB, first I can hear a noise in the sound, then after X minutes the sound stop working.

I sent an email to logitech support and they said to me that there is no problem in their drivers (Because they don have), I tested the Headset on Linux and there was no noise and I was able to hear my music a long time. There is no problem on the headset hardware.

So, I searched a lot, I found some posts here on sevenforums, but I do not find any solution to the problem, I saw too that this problem is not only on Logitech but Sennheiser and ClearChat.

I found a post on Microsoft site to trace USB events (USB Event Tracing For Windows). I launched this commands:
C:\>Logman start Usbtrace -p Microsoft-Windows-USB-USBPORT PowerDiagnostics -o usbtrace.etl -ets -nb 128 640 -bs 128
El comando se complet? correctamente.

C:\>logman update usbtrace -p Microsoft-Windows-USB-USBHUB -ets
El comando se complet? correctamente.

C:\>Logman stop Usbtrace -ets
El comando se complet? correctamente.

And the output is a capture file containing information about USB events, I made this while plugin the base via USB and when the error is present I stoped the utiliy.

With Microsoft Network Monitor I am able to see what happen, but I can not find the solution for the issue:

87 11:23:15 p.m. 17/03/2012 1.8251883 (10824) USB Hub Past Exception Logged USBHub ... Read more

A:USB Headset problem on W7 - Noise in sound, stop working after x mins

Please remove any driver from device manager for it and reinstall

Read other 9 answers
RELEVANCY SCORE 47.2

I got this message yesterday : "A problem with your video hardware caused Windows to stop working correctly."

I'm including all the necessary files and a screenshot. Hope someone can help thanks a lot !

If you're interested in knowing my system specs just click on my my system specs link.

A:A problem with your video hardware caused Windows to stop working

O I forgot to mention I was running Aero when it happened and basically a few second later Windows said something to the effect of Windows Recovered from an error. Just wondering would I have to update my video drivers or something ?

What usually causes this sort of error ?

Read other 4 answers
RELEVANCY SCORE 47.2

For the 4th time, the T540 keyboard has about 7 of its keys stop working. The seven keys are usually on the right hand side and in a group, but could be in any row, and within 1 or 2 columns of each other. Pressing the key does nothing, not even the click in click mode. I am convinced this is not a software problem as I have tried all possible software remedies. I am sure it is due to the keyboard or connection itself. The Shift or Ctrl does not work for these keys either. First time this happened after a year of use, I lost 'P' and '0' among others, and I had to replace the keyboard. A year later on the new keyboard it happened again, but came back after two days. 3rd time was four months later, and I have lost '-', '=', '5', '6', delete, and others. I remapped these. Then again now I lost another bunch including '\', backspace, enter, and others. The original keyboard is a backlit keyboard FRU 04Y2387, ID# 48L16M, Parts # 0C44952, Model # KM BL-105US . Replacement keyboard also backlit and exact replacement. Short of replacing the keyboard, or resetting the keyboard connection and cleaning the contacts, (all tried) what is there to do? Is this a contact problem or keyboard problem? Has happened with two different keyboards. Is this a common problem? Any help will be of great assistance and will be greatly appreciated.

Read other answers
RELEVANCY SCORE 47.2

keep getting error a problem caused the program to stop working correctly after i run al rasheed program For 5 minutes , No idea what is causing this problem. Thank you for any help you can provide!
the program work correctly on windows xp .
error info:
Faulting application name: RASHEED_SINGLE_960 (2).exe, version: 9.60.0.4, time stamp: 0x596225ab
Faulting module name: oc30.dll, version: 3.20.0.0, time stamp: 0x2fc10ea3
Exception code: 0xc0000005
Fault offset: 0x000532ae
Faulting process id: 0x1384
Faulting application start time: 0x01d326ea6136926a
Faulting application path: C:\ACCOUNTS\RASHEED_SINGLE_960 (2).exe
Faulting module path: C:\Windows\system32\oc30.dll
Report Id: 15452aa2-4e8c-4d73-9151-c5f97372cab8
Faulting package full name:
Faulting package-relative application ID:
sys info:
Name: Microsoft Windows 10 Pro 32-bit
Version: 10.0.15063
Manufacturer: Microsoft Corporation
Build Type: Multiprocessor Free
Boot Device: \Device\HarddiskVolume1
Code Set: 1256
Country Code: 963
Current Culture: Arabic (Syria) (ar-SY)
Install Date: 2017/05/14 01:04:18
Last Bootup Time: 2017/09/06 11:25:39
Local DateTime: 2017/09/07 10:38:14
Organization:
Registered User: Windows User
Number Of Users: 2
Max Number Of Processes: -1
Max Process Memory Size: 2GB
System Drive: C:
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Registry Current Size/Maximum Size: 120MB/682MB
more info: event file
https://www.dropbox.com/s/7eic06gtlnhv40r/e... Read more

Read other answers
RELEVANCY SCORE 47.2

Hey everyone, hope you're all doing well.
 
I wanted to know if anyone has ran into this issue.
 
"A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
 
This error pops up every time I try to open up Microsoft Office, Word, Excel, or Power Point.
 
I have uninstalled and reinstalled the software and the error still continues. I have ran Windows Updates to see if that will help, but to no a vale.
 
When I run the program in safe mode, the program works fine and when I check out the Add-Ins in options, their's nothing checked as far as third party add-ins.
 
 
Any idea of what it could be and how I can fix this?

A:"A problem caused the program to stop working correctly." Please assist

Try using a different user account on the computer (you might have to create one if you don't already have another user account). Does the same problem happen with that different user account?

Read other 2 answers
RELEVANCY SCORE 47.2

i am trying to load Age of empires 3 and i get this error message

Age of empires 3 has stopped working - a problem caused the program to stop working correctly. windows will close the program and notify you if a solution is available.

im running windows vista 32bit

does anyone have any good suggestions??
cheers
Nath
 

A:Solved: A problem caused the program to stop working correctly

Try uninstalling it and reinstalling it?
 

Read other 3 answers
RELEVANCY SCORE 47.2

some of my programs like completly stoped working like go to play them and they worked before i my computer wouldnt come outta sleep mode and now the programs that were just apear with a program stop working/responding and just recently another program has started to say program has stopped working/responding and all i did was open it and just wondering if anyone got any ideas but mostly i am just gonna format if i cant fix it

Things i have tried
CCleaner
sfc /scan now

A:problem with programs randomly stop working for no apearint reason

For how long this has been happening?
Did you installed/run any registry/system optimization tool?
Have you tried running system restore?

Read other 6 answers
RELEVANCY SCORE 47.2

Hello guys

It's my first time here and I hope you'll be able to help me out. I never had such or problem before and I'm totally out of ideas on how to fix this box.

So here is the problem. I formated my HD on my second computer. I never had any problems to do it before but now it's a pain.

So here is what I get.

When I try to install windows XP (Home/Pro/Corp) the setup works fine until it comes to the point where I get asked for network setup. After that everything goes wrong. I get a box asking me to point it to the Service pack 2 CD (service pack 2 is on the CD I used this version of windows to install it on my main computer and everything works perfectly.). After trying to find it on the CD without any succes I tryed to hit cancel. it will pop this window again and if I cancel it will start the new installation of windows with a lot of missing stuff.

So I tryed windows CD without SP on it. I get the same box right after the network setup asking me for another file (the next file to be copied from CD to the HD for the installation.)

After figuring that my problem wasn't SP2 I found out that after the network setup, my CD (that was usually set the E wont work when you call E:. It seems to be either desabled or the computer switched it to another letter.

I was running out of idea so I removed my network card thinking it would be smart enough to skip the network installation without it. Well no it will install the network anyway but doesnt ask ... Read more

A:Problem while reinstalling windows: CD ROM stop working after network installation

What version of XP, home or pro? Are these original disks or burned copies?
 

Read other 1 answers
RELEVANCY SCORE 47.2

Hey everyone, hope you're all doing well.
 
I wanted to know if anyone has ran into this issue.
 
"A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
 
This error pops up every time I try to open up Microsoft Office, Word, Excel, or Power Point.
 
I have uninstalled and reinstalled the software and the error still continues. I have ran Windows Updates to see if that will help, but to no a vale.
 
When I run the program in safe mode, the program works fine and when I check out the Add-Ins in options, their's nothing checked as far as third party add-ins.
 
 
Any idea of what it could be and how I can fix this?

Read other answers
RELEVANCY SCORE 47.2

I just got a new copy of windows 7 ultimate 64 bit OS.It was working perfectly for the first day and then whenever i open an application it starts to show this message.This includes the Catalyst Control Center application,explorer(when i open properties of My Computer),when i try to install a plugin (setup like adobe flash player plugin).The only thing that works is the browser and some video players. I've tried to run an sfc verify test and it showed there are some integrity problems in windows..Are they the cause of these problems..will running scannow in sfc solve the problems or should again reinstall my windows.? Till this editing..bittorrent was working fine and then when i tried to open a torrent..it also showed the above message! Please help

A:A Problem has caused the program to stop working correctly.Please clos

the integrity problems might very well be what causes the current problems. The question is what caused the integrity problems.

Read other 6 answers