Over 1 million tech questions and answers.

Wacom Intuos 5

Q: Wacom Intuos 5

I've abandoned the Wacom forums as they simply have nothing to offer to the many 100's of people suffering this problem

The latest (win 8) driver will not load for the wacom Intuos 5 tablet. I've cleaned every possible trace of prior installations / old drivers etc, yet having received the message that the latest driver has loaded successfully when entering the preferences mode it reports that the tablet driver cannot be found

Can anybody with a wacom help?

Preferred Solution: Wacom Intuos 5

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Wacom Intuos 5

I've had no trouble with the Win8 drivers for a Bamboo Create.

It may have helped that I never had any other drivers installed for it.

I doubt that you're prepared to do a clean Windows 8 re-install to fix the problem. I can't promise that it would work.

Read other 3 answers

Wacom Intuos and Windows 7
Having taken the plunge and bought a new whizzy Windows 7 computer I am having real problems getting it to recognise my Wacom Intuos tablet.
The tablet is old but works perfectly well and I really don?t want to buy another one if I can help it.

So far I have done all sorts to get the serial port to connect to a USB such that the tablet appears as a device as per attachment.

However, no matter how many times I install the driver from Wacom, the computer continually tells me that the driver cannot be found. I have tried reviewing the security settings of the folder the tablet is installed to, reverting back to windows Vista drivers etc. all to no avail.

Any suggestions would be really appreciated.

I also have an old scanner with a USB connection that no driver is available for Windows 7 for - are there any work arounds that I might use that might get this to connect to Windows 7?

A:Wacom Intuos and Windows 7

Please post your complete system specs and we can help you more that way.


Read other 9 answers

I am a product designer and I'm looking to get a graphics tablet in order to improve my skills set and my portfolio. I've pretty much settled on wacom but finances are a bit tight. I've read very good things about the Intuos (2 and 3) but new ones are a bit out of my price range at the moment.

How do the Graphire tablets compare to the Intuos, would i be waisting my time going the Graphire route. Intuos are currently going 2nd hand on eBay for around 80-100 for a5 size and i can get a new Graphire for about the same price, maybe cheaper.

I mainly need it for digital sketch renderings in Alias StudioTools and PhotoShop.

Any advice?


Read other answers

hi guysnow i,m comparing between sprout workspace vs wacom pro which one more sensitive and easy to use as professional work ?? if any noumbers about the resolution for both it will be great

Read other answers

I've had the Intuos 4 since it came out. Running fine under Windows 7 x64.

Over the weekend I installed an Intel X-25 160GB SSD as my primary drive, which of course required a reinstall. Now the Intuos 4 freezes immediately after boot. It almost appears as though the SSD drive is so fast that the Wacom driver gets confused and doesn't load properly.

As my PC boots up, the power light on the tablet turns on. When the "Starting Windows" comes on, the power light goes off. It lights up again when the "Welcome" screen is on (that Welcome screen lasts for less than a second with the SSD). When the main desktop is displayed, the lighted labels on the tablet go on but then immediately go off again. When I touch the pen to the tablet, the cursor moves very slightly and then freezes.

I can restart the service and everything works fine from there, but that is beyond frustrating.

Wacom tech support has been no help. I asked what the wacom web plug-ins did. He had no idea.

My motherboard BIOS and SSD are running the latest firmware. I am using the latest drivers for everything, and this even happens on a totally clean install. I've tried using the delayed startup for the tablet service, but that doesn't work either - it never seems to start up if delayed.

Has anyone else had this problem or know of a fix? This is driving me crazy.


A:Wacom Intuos 4 freezes after SSD install

I have had months of troubleshooting and testing equipment to discover why this was happening to me. When I installed a SSD my Intuios2 would freeze on bootup. I went have to a regular hard Drive and it worked just fine. Then I got a new SSD and it started freezing again. their Tech Support told me that it was indeed a known issue that SSDs go so fast that they (same with some other devices on bootup) don't load the drivers properly. He said they were working on it with the tech people that make the SSD firmware. But he did not sound hopeful in any solution soon. Sounded like it was a tough problem and may need a fix in windows 7 and other OSes.
I solved it by going into OS Services and on the loading of the WAcom tablet service you tell it to do a "delay Starting" setting. Then it loads last in the bootup and it works. But you do not have a pen for about a minute after it boots up.
Good luck!

Read other 7 answers

Just thought I'd let you guys know that the Wacom Intuos4 graphics pad works a treat on W7

- straight out of the box, too..

A:WACOM Intuos 4 works fine..

You aren't using the Wacom Drivers with the software where it lets you customize the tablet and Pen per app, etc?

Read other 8 answers

Hi guys, i've been using the Windows 7 and my Wacom Intuos 3 for about 1 week and it was great.

But yesterday suddenly my tablet stoped work when my windows startup....if i disable the wacom drivers the tablet works fine but not with all the wacom stuff, and if i go to the wacom properties and remove settings my tablet back to work normally.

I've tried to reinstall the wacom Driver 6.1.2-4 but still the same...when windows startup and load my wacom driver the tablet stop...only work if i disable the driver or remove my settings..(yeah i've tried to get all stuff to default, didn't work too)

Sorry if there anything wrong with the text, English isnt my mother language

A:Windows 7 + Wacom Intuos 3 Problems...

Welcome to seven forums. My only suggestion is to try and contact the manufacturer and explain your problem. it doesn't sound like a windows seven problem but a problem with their driver support.

Read other 9 answers

can I use my wacom intuos pen for thinkpad x201 tablet's screen? is the pressure still working?

Read other answers

Hello, before I go out and buy a Wacom Intuos Graphics Tablet I was wondering if anyone had any experience using this. Will the tablet work with this PC? Thanks

Read other answers

Hello, before I go out and buy a Wacom Intuos Graphics Tablet I was wondering if anyone had any experience using this. Will the tablet work with this PC? Thanks

Read other answers

My Wacom Intuos2 tablet randomly stops working, forcing me to restart the computer to re-enable it.

When I say "stops", I mean not only does it not take input, but the device light goes out. Switching to another USB port does nothing.

When I went into the Device Manager, there's what appears to be the issue tucked into the "Human Interface Devices" section. "USB Input Device" appears there, with the 'alert' icon. Going to "Properties", the error code I'm given is as follows:

Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)Click to expand...

I can't even roll back to a previous, functional device driver since it's still running the initial version. (Nor does hitting "update" offer a solution, though admittedly I didn't really have high hopes for the automatic driver updater that came bundled with Windows 7.)

I understand that from a functionality standpoint, I have a solution (to simply restart the computer) but that's relatively time-consuming for me, since I have references laid out, music queued up, etc. when I'm working on an image, and it's quite frustrating to set everything up repeatedly.

Does anyone have any suggestions as to how to fix this error without resorting to a complete reboot?

Screencap & extra info below.

Tech Support Guy System Info Utility version
OS... Read more

Read other answers

while trying to install a driver for my new Wacom Intuos Art digital pen tablet, I keep getting a setup.exe - system error message that says: This program can't start because api-ms-win-crt-runtime-l1-1-0.dll is missing from your computer. Try reinstalling the program to fix this problem.  I have tried installing an older version of the driver but everytime I shut down my computer and restart it, the driver disappears and I have to install it again.  Any help on this issue?

Read other answers

when running the most recent (and only) Wacom driver for my Intuos GD-0912-R wacom tablet (serial, not usb), my computer recognizes the  tablet (I see it in the device list), but no matter how often I install the driver 613-5 (or even the 612-5 version), there is "no driver installed" and the tablet doesn't work.  It lights up when I use the pen, but it doesn't work as a pointing device.   Can you please advice?  I've had this tablet for years, it works great on every other computer I've had.  I would understand a more limited support for Windows7, but nothing at all?  Can somebody please advice? Thank you Wim

A:Windows7 and Intuos Wacom serial tablet - no driver support?

You need to install WacomTablet_605-7 -- you can get that from the Wacom website, that is the highest-version wacom driver that supports serial port tablets.  I got mine to work today.  Here are the steps I've taken:

Download http://www.wacom.com/downloads/driver-detail.php?id=178 Right-click on WacomTablet_605-7 and select properties In the Compatibility Tab select "Run this program in compatibility mode for" Windows Vista
Select Run this program as an administrator in the Privelege Level group box Apply and close the properties dialog Run WacomTablet_605-7 After WacomTablet_605-7 finishes -- reboot Once Win7 reboots you will have a functioning Wacom Tablet
I've done this on my own system running Windows 7 Ultimate x64.  Device manager still shows a warning triangle under Other Devices -> WACOM GD, but the Wacom 4D mouse and the Wacom Stylus both work.
I hope this helps,

Read other 48 answers


is there a way to get rid of the wacom Driver for Intuos?

in the past i used DriverCleaner Solve Driver Problems, Fix Crashes - Driver Cleaner


A:is there as way to get rid of the wacome intuos drivers?

This might help...

Read other 1 answers

I have 2 Intuos Pro drawing tablets that have always worked very well, until this afternoon when both of them stopped turning on when plugged in to my laptop. BOTH of them work fine wireless, but when I plug either of them in to my computer(s) via mini usb to usb cable, all of their lights go out and they stop. I've tried to use them on 2 different pc (windows 10) computers, and I've tried out 3 different cords on both tablets. What is happening? Is it a setting I've somehow changed?

One of the tablets will light up for just a second when plugged in only to go out.

An Intuos 4 has worked on both computers wired, so this problem is exclusive to the Pro tablets.

As an artist with deadlines, any help is very much appreciated!!

Read other answers

Please tell me if this is not the right sub-forum.

I've been encountering error Code 43.
I've tried a lot and I am running out of options.

I'm working on an Acer Aspire 5542G.
My operating system is Windows 7.
The USB device not being recognized is my Wacom Intuos 4 PTK.

- I've de-installed and re-installed my tablet driver.
- I've shut down and turned on the laptop.
- I've returned the laptop to original factory settings.
- I've taken the battery out, and put it back in again.
- I've de-installed and re-installed universal serial bus controllers.
- I've used CCleaner to clear up my register.
- I've used my google-fu to it's full extent, but I haven't found a fix.

If someone could help me, that would be great.

A:Intuos 4 + Windows 7 = USB device not recognized

If anybody has any clue of how to even get a TEMPORARY fix, I would appreciate it! I will try anything.

Read other 8 answers

Hello WinSevenForums,

I'm new here, and I got a problem.
I'm looking for a latest driver for my Wacom Intuos 3 tablet, which I bought back in 2007.

What I need is a link to the latest driver, and step-by-step instructions on how to safely install the new driver. Do I have to uninstall the old software and tablet then install the new driver first? etc, etc.

I would appreciate it.


A:NEED HELP! Find and Install latest driver for Intuos 3 tablet

Hi Welcome to Seven Forums .. The Drivers you need are in the Link below ..
Drivers | Wacom

Read other 3 answers

I have a Toshiba laptop c/w windows 7 home premium x 64 bits, I have just or trying to install a Wacom cth-680 tablet that I plan to use on Photoshop CC, I have followed the installation instructions, so far nothing is happening, the tablet light is on but the pen does not do anything, so what is my problem...

A:wacom cth-680

Maybe a button on the tablet to enable/disable? Did you check Device Manager? Did you restart laptop?

Read other 1 answers
Q: wacom

After spending quite decent money for an HP x360 4103dx (i7, 256 SSD, 8Gb RAM) few months ago, I am finding myself incrediby disappointed by the lack of professional grade stylus available under the synaptics umbrella. Surface pro 3 pen is a way more decent than the cracky active pen from HP which is only working for taking notes (with the risk of cracking the screen given how hard I need to push to see my trait).Do you think to implement somehow some software solution to make the new Wacom AES compatible with this laptop?

Read other answers

Guys, I am interested in buying the Wacom Graphire3 for masking in photshop and Aftereffects and modelling in max and maya.

Can you tell me my decision is OK or not. I know Introus3 is good for professional work but that was very costly for me.

So, please tell me the work i want to do, Graphire 3 will help me in that or not.

Read other answers

I am considering purchasing a Wacom Intuos5.

If any Forum Members have experience of this product I would be grateful for your comments. In particular....

1. Quality of the product
2. Ease of use
3. Bundled software
4. Support from Wacom

Is the Wacom Intuos5 the best product? I am prepared to pay more if there is something better than the Intuos5.

The real cost is not the actual money it is the time and effort needed to learn the full capabilities of a new product, in terms of both the hardware and the software. I don't want to invest a lot of time and effort in a product only to find in a few months time that it is not up to the job and I need to start all over again with a different product.

Thanks in advance for your advice.


Read other answers

I can't seem to get the drivers for the Bamboo to stay put in XP Pro. The drivers are listed in the device manager, but XP seems to have decided that it knows better and uses MS fro 2001! Wacom will flash an error and tell me to reboot. This happens every time I shut the computer off. I can sometimes get the tablet to work by switching USB ports and It doesn't seem to be port specific. Sometimes it will work in a different one each time.
I installed w/o plugging the tablet in first - I uninstalled and tried installing with the tablet plugged in, DL new driver from Wacom.
The only Wacom that shows up in the Device manager is WACOM mouse. The tablet is listed under HID device. I don't get tablet.EXE at startup either.
If I tell XP the drivers are on the Wacom CD, XP just says there is no information about my device on the CD. I bought 2 tablets - the one hooked up to my other pc is working just fine in 2K. but I haven't checked the XP home drive yet as I haven't needed Photoshop.
It's not an AV problem as there is none on the problem PC. It is only used to run embroidery software and doesn't go online except for a flash upgrade once in a while. Any designs I have downloaded come thru the main PC which does have all the protection.
I wouldn't have noticed the problem but for the fact that the pen is configured wrong. I want the apps on the switch reversed and can't.
Beta Orionis

Read other answers

I just recently (about two or three days ago) got a Wacom Bamboo Connect. It worked perfectly the first day I got it, but when I turned off my computer for the night and turned it back on that morning, I could only move my cursor around the upper-left hand corner of my screen. I looked at my pen properties and made sure that all the settings were on full, and they were, but it still didn't help.

I think it MAY have something to do with the fact that whenever I reinstall the driver it says that Bamboo Dock could not be installed, however when I turned my computer on I had Dock on it.

It may also be of assistance to know that I kept getting disconnected from LightIRC until I uninstalled my tablet again.

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.00GHz, x86 Family 15 Model 2 Stepping 4
Processor Count: 1
RAM: 255 Mb
Graphics Card: 32MB ATI Rage 128 Ultra, 32 Mb
Hard Drives: C: Total - 19053 MB, Free - 1305 MB;
Motherboard: Dell Computer Corp.,
Antivirus: McAfee VirusScan, Updated: No, On-Demand Scanner: Enabled

A:Derpy Wacom

Read other 9 answers

I am going to buy a Think Pad T480 with touch screen but I have a doubt: can I use my Wacom pen (I have a tablet Intuos5) on the T480 display? Or which pen should I use?Thanks for suggestions. 

Read other answers

I've got a Thinkpad p51 with the built in pen screen. I'm not sure when it happened but I just noticed that my Lenovo Pen doesn't seem to work as expected in a few programs- namely zbrush.I have ZERO pressure sensitivty which for a sculpting app makes it close to useless. Photoshop still works fine but Zbrush (4R8) works with limited functionality (no pressure). I have my old Intuos pad and that works fine, but the whole point of paying for the upgraded screen was to not have to carry around anything extra! Trying to install the latest wacom feel driver results in "a supported tablet was not found on the system"(using ISD_DualTouch_7.3.4-47.exe) I suspect that this is the issue- anyone had any luck installing a wacom driver for their lenovo screen?

Read other answers

Ever since I upgraded to Windows 7, I have been having problems with my Intuos 4 graphics tablet. It seems as though the drivers are "uninstalling" themselves, because every time I start up, I have to re-install the driver (I don't have to uninstall the original).
Recently, the problems have gotten worse. Now, even after installing the drivers (again), I'll get no input from the tablet.

Anyone else have this problem?
Anyone know the solution?


A:Wacom Intuos4 problems

Quote: Originally Posted by mrOtterFox

Ever since I upgraded to Windows 7, I have been having problems with my Intuos 4 graphics tablet. It seems as though the drivers are "uninstalling" themselves, because every time I start up, I have to re-install the driver (I don't have to uninstall the original).
Recently, the problems have gotten worse. Now, even after installing the drivers (again), I'll get no input from the tablet.

Anyone else have this problem?
Anyone know the solution?


Are you using the correct driver? is it a win 7 driver? do you have a backup from before the problem to restore from? do you have a win 7 dvd to do a repair install?

Read other 4 answers

Does anyone know where I can find the proper drivers for this Lenovo Pen Pro (Wacom)? https://www.lenovo.com/us/en/accessories-and-monitors/pens-and-supplies/pens/TAB-ACC-BO-Lenovo-Pen-P... It does support the P52 4K touch according to documentation.

Read other answers

Alright, so I recently bought a Wacom Tablet off ebay, slightly used but hasn't been touched in the last three years or so. I just got it yesterday (shipped from australia), and it doesn't work. I installed the correct driver for it off wacom.com, I installed the painter program that came with it (though I'm sure that has nothing to do with the problem), I plugged the thing into my computer, I have all the parts, but when I click on "Wacom Properties" in my control panel, a box pops up saying "A supported tablet was not found on the system." and only one option, and that's to press "Ok" and move on. Now, the only thing that I'm scratching my head about is the AC Adapter that came with it. The prongs (?) are set up different from what would normally fit into the sockets in my house. I'm guessing they're different because it came from Australia, but then I don't know where to even plug the OTHER end of it into. There's nowhere it'd fit on the actual tablet, and I don't know if it's supposed to plug into my computer or what.

Anyways, if anyone could help with this problem, I'd be eternally grateful. Also, I'm wondering if anyone else has had a problem similar to this?

Thanks. Oh, and I hope I posted this in the right folder... I didn't really know where to go, lol

A:Wacom Tablet not found?

Read other 11 answers

I am curious if there is a list of which models of Yoga or X1 Yoga use Wacom EMR vs Active ES tech. I am pretty sure the original S1 Yoga and Yoga 12 use EMR but X1 Yoga uses AES I think but I am not sure all three generations do. Just trying to determine compatibility of stylus across the generations like Yoga 260, 370 and X380. The spec sheets for ThinkPad Pen Pro (4X80H34887) and Lenovo Active Pen (GX80K32882) seem to be incomplete in models supported. Then I also want to know which models the Wacom Bamboo Ink works with. I know wacom has a compatibility list but again I think it is incomplete. Thanks for any details on verification.

Read other answers

I have a Wacom Graphire 2 tablet that is for USB connection, but all I have is a ps2 to usb adapter. Is it possible to install the tablet with such a connection? I have tried using their regular installation program, but it won't allow me to install the drivers because it doesn't detect a usb port. I have also tried doing it through add/remove hardware, but it isn't being detected as such automatically. I am using win ME.

A:Wacom Graphire 2 for USB question

The easiest solution would be to buy a USB PCI card which would give you 2 or 4 USB ports. These can be bought at nearly every computer store.

Read other 1 answers

I recently installed Painter 5.5 Web Edition and it runs OK with my mouse. Unfortunately, if I try to use my Wacom Art Pad II it crashes the Art Pad driver and I have to reboot. The ?metacreation? web site FAQ suggested I need to download an up to date version of file Api32_12.dll but does not provide the download facility. Can anyone help?

Read other answers

My brand new Yoga X1 2nd gen has a faulty pen/stylus. When I tried to use it first did not react to touch at all. Then I enhanced sensitivity to softest and it started working, albeit only at certain orientations of the pen. This means it works only if the pen is at 45deg or less to the screen and only facing one side. This is very annoying since it keeps interrupting when drawing. Any idea what I should do? It really seems like the pressure sensor in the pen is not working properly.  

Read other answers

So I have one hdmi plug thing in my pc and my monitor needs one so until Christmas my computer has been using it but I got a Wacom cintiq 13hd tablet and it needs a hdmi plug thing connected to my pc I can't plug the tablet into my monitor it needs to be in the pc so I got the splitter for hdmis but it hasn't been working so i can only have either my monitor on or my tablet and I don't know what to do help

Read other answers

or is it a Kaspersky issue? Sorry if this is in the wrong forum!

My Wacom Intuos 2 tablet works fine, unless I try and use it with Kaspersky antivirus. The pen will not control the cursor within a Kaspersky box! I can move the cursor anywhere I like on the screen but as soon as it gets to the edge of a Kaspersky box - be it a pop-up one or the main control screen, it refuses to cross the line. It's almost as if there was a solid fence round the box! Weird.

I should probably send this to Kaspersky and Wacom but I wonder if anyone else has hit this issue?

A:Another Wacom tablet issue

I have the same issue, and was looking to see if there is a fix. Have you heard anything?

Read other 6 answers

Since the update 2 days ago my Windows "forgets" the Wacom driver I need for my tablet. I have to re-install the driver at every startup. Then it works as usual, even my customized settings for the tablet buttons are there. But when I don't re-install the driver it just doesn't work.

Anybody else with this problem?

A:Win 7 keeps losing the Wacom driver

Look at this thread and see if the posts resolve your issue

Read other 1 answers

Wacom has not been helpful at all (they haven't answered in two+ months), and I'm not sure where else to turn...

I've been having this problem with my graphire3 tablet. When I draw in mouse mode in every program that is not Photoshop, it draws several inches away from where I was actually trying to draw.

In Photoshop, however, it works properly. Pen mode works properly as well, in every program.

I have tried every available driver on Wacom's website, with the same result. All have been clean installs.

I don't know what to do. I guess the easy answer is "use pen mode", but I just can't get used to it.

(My OS is Windows 7 Professional)

I should also add that the tablet works 100% perfectly on my husband's computer. We have done the exact same things to install it.

A:Wacom Tablet Issues

Read other 7 answers

It works on my admin account, but not on this one...I'm guessing the driver can't start up on this standard account? Is there a way to change this?

A:wacom tablet not working =x

What model tablet are you using? I have the one listed in my specs (see below) and that works perfectly for me. In fact, I had to resort to using it for a while when the left mouse button failed (I have since got a new mouse).

Read other 7 answers


I posted this question at the Wacom Forum but got no response (so far).
Thought I'd try it here.

I'm using Intuos 2-6X8 w/ Photoshop CS2 (Win XP Pro.)

I set my brush cursor display to 'Normal Brush Tip.' (Photoshop Preferences).

When I use the mouse the brush stroke is normal (the cursor and stroke are the same size.)
When I use the pen the brush stroke is smaller and and doesn't match the cursor. (it's centered and doesn't fill the cursor.)

Consequently, when I paint with the pen I have to guess where the edge of my brush is and I get a smaller stroke.

I reinstalled and updated the Driver but nothing helped.

Hope there is a remedy (setting?) because I prefer the 'Normal Brush Tip' setting.

Thank You,

A:Solved: wacom tablet

You're probably not pressing hard enough, or your pressure sensitivity setting (in the WACOM control panel) is too low. If you don't want pressure to affect your stroke weight, turn off shape dynamics in Photoshop's advanced brush settings panel.

Read other 3 answers

hi i just bought WACOMS volito graphic tablet and for some reason some of the software will not load? i tried manually starting the setup files but nothing happens some of the software load by double clicking the setup or through the menu's on the disc but 2 of them won't launch the setup automatically or manually?

i have windows XP and the software is compatable

A:WACOM bundled software

Read other 6 answers





I would suggest contacting the [email protected] ask in their support forumhttp://www.talatdogan.com/forum/viewforum.php?id=14

Read other 2 answers

I used to use this program called vandal squad, and since I've gotten a new computer things strated to act up. With my old computer it was working fine but occasionally lagging which lead to me buying a new one. So basically in this online graffiti program .. I always do big pieces with lettering all that stuff.. but now I cant use it at all because when I want to start a line with my wacom bamboo one, it responds a second later which makes it all look tatty and scruffy .. maybe is this because of the speed of the computer or is it the tablet itself .. This problem also occurs in Paint but not *** bad as in Vandalsquad .. hopefully I've been discriptive enough as I couldnt really describe what the problem is ..

A:Wacom bamboo one - Vandalsquad

This is a game not real life


Read other 1 answers

Hey, I got a WACOM tablet (inutos3) but i cant efficiently write norwegian text thru the tablet.

Just gonna post the windows help information here:


Change the language you use in Tablet PC Input Panel

To use handwriting recognition for a language other than your display language or English, you'll need to upgrade to Windows 7 Ultimate. (The handwriting recognizers for English and your display language?if available?are included in Windows 7 Home Premium and Windows 7 Professional.)

If you upgrade to Windows 7 Ultimate, you can download a language pack for the language that you want to add. See "Which languages are handwriting recognizers available for?" later in this topic for a list of available handwriting recognizers.

For information on how to upgrade to a different edition of Windows 7, see Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade.

To learn how to download a language pack after upgrading to Windows 7 Ultimate, open Windows Help and Support in Windows 7 Ultimate, and then search for "Download a language pack to get handwriting recognition for another language."

After you download the language pack and add the new input language, use the language bar on Input Panel or on the Windows* taskbar to switch between input languages.

Basically though, anytime upgrade doesnt seem to be working for Norway and buying a completely new windows 7 ultimate is a bit out... Read more

A:Writing with WACOM tablet

What version of Vista do you have now?

Reading that info it appears that if you have your display language set to Norwegian on the Home Premium or Professional versions (of 7, maybe Vista aswell) it will work.

Read other 3 answers

So I just bought a wacom bamboo tablet, and it was working fine for about 15 minutes, but then whenever I hover over the tablet, it registers as a click. And after a while it back to normal. and every 15 minutes its not working properly.

A:wacom bamboo problem. Please help

If you just bought it, return it!

They have a 1 year warranty!


Read other 2 answers

Hi there,
I've had an Intuos2 for a while now, and it doesn't seem to work. The LED is orange and turns green when the pen touches it, and the tablet works perfectly fine with on a laptop, but doesn't always function on our Windows XP. I've re-installed all of the drivers, restarted, unplugged, even bought and tried a USB converter, and nothing. It only works sometimes, at (what seems) random. When it does work, it's flawless, but at the moment the computer doesn't even recognize it- in the Control Panel under Wacom Tablet Properties, the error message 'A supported tablet not found on the system' is all I get. Please help! D:
Tech Support Guy System Info Utility version
OS Version: Microsoft Windows XP Home Edition, Service Pack 2, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.66GHz, x86 Family 15 Model 2 Stepping 9
Processor Count: 1
RAM: 759 Mb
Graphics Card: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller, 64 Mb
Hard Drives: C: Total - 109364 MB, Free - 69079 MB;
Motherboard: ASUSTeK Computer INC., KIRIN-V
Antivirus: AntiVir Desktop, Updated: Yes, On-Demand Scanner: Enabled

Read other answers


Anyone used one of these before?

I hear their great, and id like to get one for illustration and logos.

Anyone here have expirience with them?


A:Wacom Drawing Tablet

Read other 6 answers