Over 1 million tech questions and answers.

Envy 15-j100 receives power from adapter but power button do...

Q: Envy 15-j100 receives power from adapter but power button do...

My laptop will no longer turn on. When the AC adapter is plugged in, the LED light is white indicating power is arriving at the laptop. However, nothing happens when I push the power button. Troubleshooting steps I have completed already include: Hard reset (several times including after each step below)Tried starting without the batteryRemoved all removable components and reseated themRemoved all removable components as well as bottom cover. Cleaned with compressed air. Put everything back.Nothing appears wrong and nothing happened between the last time it turned on and this time that I am aware of. The laptop is out of warranty, and I am pretty handy with computers. Is there anything that can be suggested short of a hardware replacement that would help get this resolved? TIA

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Envy 15-j100 receives power from adapter but power button do...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 100.4

So i have myaelf bent ovwr a barrel here. I borrowed my old mans Laptop to do some last minute edits to my online shop.It had been working for approximately 5hrs straight before i signed in to my user account.WALKED AWAY FOR LESS THAN 3 MINS CAME BACK TO FIND IT POWERED DOWN FOR AOME REASON....NOW IT WONT boot up or power on.Envy 17 j100 seriesThe charger LED is steady white throughout not changes or flashing on keyboard.Hard reset has been doneReseated memory cardsTried turn on via ac only no luck but LED is still steady white colour entire time charger is plugged in.Have let sit without battery or charger for 10 mons and also left on charge for 30.mins straight. Nothing works please help

Read other answers
RELEVANCY SCORE 96.8

The power button broke and I can't power on or off without opening the case. It is powered on and I'm just putting it to sleep. The warranty for this computer is expired in January 2016. I am wondering if there is somewhere I can order the power button to replace it myself. I only need the button, not the power button board.

A:HP Envy 15 x360 power button broke - can't power on or off

Sure. What is the complete product number or product name of your HP Envy 15 x360 notebook?  So far you have only partially identified your HP product as being in a particular model series.  Look on the bottom of your notebook for the product number. It is the the following form xxxxx#xxx.  x= an alphanumeric character. Once you provide that product number I will be able to get you abn HP part number for the power button. Sorry to hear that your notebook isn't useable for now.

Read other 2 answers
RELEVANCY SCORE 84.8

Hello,I was directed by here after submitting a warranty query by a member of CS. I did some searching online, and I (worryingly) found a heck of a lot of instances of cases splitting apart on the hinge by the power button. I got told because it is out of warranty there is nothing which can be done (besides paying for a solution of course). Does anyone have any experience of dealing with this? Despite being a laptop I think it left my house once since I've owned it.It is less than 2 years old, it is pretty rubbish since the laptop was nearly 900, and the side of the case is literally splitting/opening up.

A:HP ENVY 17-j130ea splitting apart by power button

@Judith3

 

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
 
Thank you for visiting the HP Support Forum.

Read other 2 answers
RELEVANCY SCORE 84.8

"fan is not working properly, not recommended to continue to switch on the computer, will shut down in  15s" I always see this message when I put on my new hp envy x360 convertible, core i5, 12gb RAM. what is the problem with my laptop

Read other answers
RELEVANCY SCORE 83.6

When i place the button it just stays stuck and my pc restarts, is there a way to place it so that it bounces back is it originally did?

Read other answers
RELEVANCY SCORE 82.8

My Envy wont turn on with the ac adapter pluged in and the battery in the laptop..i have tried the charger and its fine..the power sockets are also fine..the light beside the charger deos not even turn on when the battery is inside the laptop..as soon i take the battery out with the charger still connected , the light then turns on and the laptop then powers up when i press the power button.  when the laptop is on without the battery and i fix the battery into it, it charges for just a few seconds and stops. i cant understand this because the battery lasted for four hours without plugged in the previous night and when it when low and wanted to charge it this issue occured,,..pls need your help guys..thank you











Solved!
View Solution.

A:My Hp envy TS 15 notebook pc wont power when the ac adapter ...

Hi @Manaseh_Tello1,Thanks for becoming a member of the HP Support Forums. I understand you are having an issue with the computer booting with the battery connected. I will be glad to help you. Please post the full product number and operating system in use on your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Is the Windows Version on My Computer 32-bit or 64-bit?Please get back to me with above information, so I can help you better.

Read other 4 answers
RELEVANCY SCORE 82.8

My laptop have usb type-c port.  I wanna use this port for connection to lan, hdmi and power at same time, via special dock and power adapter.   So i need a HP recomended devices for  this, please help me find it.I try macbook pro 2016 power adapter, but it didnt charge my laptop. 

A:USB type-c power adapter and dock for HP Envy 15

it has a lot of thm but you can check this one http://store.hp.com/us/en/pdp/accessories-88342--1/kensington-usb-30-docking-station-with-dual-dvi-h...

Read other 1 answers
RELEVANCY SCORE 82.8

My laptop have usb type-c port.  I wanna use this port for connection to lan, hdmi and power at same time, via special dock and power adapter.   So i need a HP recomended devices for  this, please help me find it.I try macbook pro 2016 power adapter, but it didnt charge my laptop. 

Read other answers
RELEVANCY SCORE 82.8

My hp envy j040us laptop of 3 years, just shut down and never came back on. I did a hard reset but nothing improved. Right now when the power button is pressed , I see 4 steady blinks at 4 seconds intervals followed by one quick blink then the sequence starts all over again. Any assistance will be greatly appreciated.

Read other answers
RELEVANCY SCORE 82

Hello Forum, I've just managed to break the head of my HP Envy 14 Spectre (14-3011tu) power adapter cable.  The power adapter is one of those HP travel adapters (65W - 574487-001) with interchangable heads.  I called HP Australia and various HP suppliers to see if I can get a replacement interchangable heads or even a whole replacement adapter however no one has them in stock (well they have the base power pack but not the correct head and no one know when they'll get extra stock).   Do anyone know if there is a similar HP laptop that uses the same long 4.7mm adapter head as the HP Envy 14 Spectre (14-3011tu) ? I'd like to buy one so that I can hack together a new interchangable head cable whilst I wait for new OEM stock to come in.   PS. I've already ordered a few of the aftermarket adapters off eBay that clam to fit the Envy 14 Spectre however they are a few micronos too thick to fit in the socket.  Image below just in case you're having the same headaches as me.  http://support.tmg100.com/HPEnvyPlusAM1.jpg Cheers!











Solved!
View Solution.

A:Replacement HP Envy 14 Spectre (14-3011tu) power adapter cab...

Hey grainass, This is a hard part to find for some reason. I have confirmed personally with customers that this part number is the correct replacement for the DC cable that connects the power brick to the notebook.  687530-001 Click here to go to the HP Parts Store. At the top you'll see the Americas tab highlighted. Click on the Asia Pacific tab and choose Australia below. On the next page, in the Search by part number box, type in 687530-001 and press Enter. Then you can order it online or call the HP Parts Store at the number listed. Really hope this helps! Let me know if you have any questions!  -------------------------------------------------- Anyone else looking for a Spectre 14-3xxx replacement DC cable can use this part number as well. Just choose the appropriate country on the HP Parts Store link and post any questions you have. 

Read other 10 answers
RELEVANCY SCORE 82

So my power adapter needs to be changed, but when I plug it in to my laptop, when it's off, it'll turn it on by activating the novo button. But it says it's charging when it's not. What's going on? 

Read other answers
RELEVANCY SCORE 79.6

My laptop will not power up ....pushing the power button does nothing....no indicator lights ....no fans ...no screenI have 2 batteries neither will power it up ....i even bought a new charger....no luck... i removed battery ,unplugged power and held the power button for over 2 minutes ...reattached power  supply ...still nothing ....anything else i can try?It is an HPEnvy 17T-J100...alresdy had the screen repalced after 1 day due dead pixels...Help please

Read other answers
RELEVANCY SCORE 79.6

After battery goes down certain level, laptop turns off with a click sound and never turns on. No indicator lights up when plugged in, even though battery doe charge. (How do i know?) If I open the back cover of the laptop, unplug the battery and plug it back in, it fixes the problem until next time I let the battery go down to critical level.I can't keep fixing it by opening back cover because it is very tedious. Battery is not removable.I have already tried fixing by holding power button for 15 seconds techniqueI have also tried windows key and B key along with power button method but it doesn't work.Battery is not bad as it holds pretty good amount of charge.Please help.

Read other answers
RELEVANCY SCORE 79.2

When plugging in the power adapter, the "charge" light does not come on, nor will the notebook power up. To rule out the HP power adapter I plugged in a Targus universal adapter (with correct polarity) and same result. Same results whether the battery is installed or not. The notebook had been in storage for several months, therefore, no recent changes. Any ideas?

Read other answers
RELEVANCY SCORE 76.8

Hello,
After putting my computer into sleep mode last night, I was unable to get it to boot into windows this morning. When i pressed the power buttong, everything turn on and working (all fans are functional, gpu power led is on, all hard drives & cd drives are functional. But the problem is, the screen to my monitor is blank. I also noticed that my usb aren't working (mouse connection light isn't on). I tried a soft power off by holding down the power button but no luck. The system does not turn off no matter how long I hold it. The only way to turn it off is by pulling the power supply cord or turning the power supply switch off.

My pc build:

AMD FX-6300 3.5GHz Socket AM3+ 6 core processor
ASUS ENGTX 560 DCII OC/2DI/1GD5 Geforce GTX 560
ASUS M5A97 LE R2.0 Motherboard
COOLMAX ZU-700B 700W ATX 12V Power Supply
G.SKILL Ripjaws X Series 8GB (2x4GB) 240-pin DDR 3 SDRAM 2133 (PC3 17000)
Prolimatech PRO Panther 120mm CPU Cooler
NZXT Phantom PHAN-001RD case


THE PROBLEM: Computer turn on with everything running as usual, but shows blank screen on monitor. Cannot soft power off by pressing power button.

Things I tried:

Clear CMOS by removing battery and switching pins
Running with 1 4GB RAM instead of 2, move the ram around the slots & alternate which Ram is used.
Check my monitor by testing it with another computer
Tried pulling the PS plug and holding the computer power button for 1 min
Test the GPU with another computer & it runs fine
I tr... Read more

A:Windows 7 blank screen after sleep mode (unable to power off with power button)

Hello,

Is it possible that you can test with another compatible PSU? I would strongly suggest doing so.

Also try the following steps:
?Make sure that the (internal) speaker is connected to the motherboard
?Remove all memory and attempt to boot the PC
?You should get the no memory beep errors

If the Power Supply is in working order and no beeps are present then it can be indicative of a faulty motherboard.

For troubleshooting purposes it may be a good idea to remove the components from the case and bench test to rule out a short.

How to Bench Test / Troubleshoot Your System

Read other 7 answers
RELEVANCY SCORE 76.8

Toshiba Satellite A25-S2792 w/ XP & P4 has greenpower chord is lit and yellow battery light is flashing when power chord is plugged in. After I press the power button, the power chord light changes to yellow, begins flashing and the battery light goes out. Removing the battery gives the same results. Pressing and holding power button down for 20 seconds w/ battery out yields same result as well. Suggestions?
 

A:A25-S2792 doesn't power up yellow light flashes after pressing power button

The motherboard is bad. Have you tried reseating the memory?
 

Read other 10 answers
RELEVANCY SCORE 76.8

recently bought a Dell Inspiron 14 5459 on June 12, 2016 and first thing I noticed is that to turn on the laptop I need to press and hold down the power button at least for 3 seconds in order for the laptop to boot up, this seems strange, I brought up this issue at the Dell Store where I bought the laptop and the sales people there told me that they noticed this in most Inspiron models.  Is this normal?

A:Dell Inspiron 14 5459 power button needs 3 seconds long press to power up?

Hi,
Thank you for writing to us!
This is unusual we would suggest you to check with another system to see if the same happens.
Kindly provide us with the service tag and email address.
Thanks
Robin

Read other 1 answers
RELEVANCY SCORE 76.8

Why does shutting down the computer, removing the AC Adapter, removing the battery (if it is a laptop), and holding down the power button for 30 seconds fix problems in one's computer. I was recently corrected in a post of mine that this does not actually do anything unless one removes the 3 volt battery from the motherboard, but I know this is not true from experience. Here is the correction I am referring to from a more experienced member:








  
Quote: Originally Posted by TVeblen


I'm sorry, but I feel I need to correct misinformation. Lots of folks read these posts.

The motherboard has a 3 volt battery installed in it. This battery provides just enough power to retain all of the BIOS settings regardless of the state of the main power or the power supply. Following the steps above will not reset the BIOS or the CMOS chip.

You can reset the BIOS defaults by selecting that option from within the BIOS settings. Usually on the Exit menu.

To reset the CMOS (Clear the CMOS chip) there will be either a jumper on the motherboard to perform this function with, or newer boards have an actual reset button.

The above procedure will work to restore the BIOS defaults if you add the step:
2b - remove the 3v battery.
But it will not clear the CMOS.


The reason I know that doing the hardware reset I described initially works:

1. I have a laptop that occasionally suffers from a USB Device Error issue. Every port gives me th... Read more

A:Shut down computer, remove all power sources, hold down power button

Further information; this is what my manufacturer of my laptop suggested for my USB issues View Document. After step B. of the power cycle directions, my computer works fine.

Edit: I have skipped all the steps prior to the power cycle, and it still fixes my problem. It is not a software update that is fixing the problem.

Read other 6 answers
RELEVANCY SCORE 76.8

Hello,

Hoping someone here can offer some advice? I own a Dell studio xps 435t-9000 that is a couple years old. I recently replaced my harddrive and since then (don't know if it's a coincidence or not) I'm having another problem. After I installed it, the first time my computer went into sleep mode/hibernation I couldn't wake it up. Power light was flashing white. Eventually I shut it down manually and then it wouldn't boot. Had a solid amber light, no power except the power supply. Fans not working. I unplugged everything and made sure it was all good. Wouldn't start. Left it overnight and plugged it in the next morning. Started up. Worked great for about 7 hours and then just randomly shut down, no errors or anything. Same deal. Wouldn't start, amber solid power light. Let it sit for awhile, reseated everything and wouldn't start.Gave up for awhile, tried a few hours later and it started. I read a few boards pointing to the power supply being bad or not powerful enough. However, I replaced the power supply about 6 months ago with a Corsair 600 which is plenty power. Could still be an issue perhaps but seems odd it would die in that little time. I also replaced my graphics card if that matters. Finally the last time I checked all the plugs I also took out the board batter for a few minutes to try and "reset" things. Not sure if that matters, either.

So, I'm at a loss where to go from here. I could replace the power su... Read more

A:Dell XPS random shutdown won't power on solid amber power button

Memory can cause the problems you are having. Make sure the memory is seated , Then run a memory program such as memtest on It let it run for a while and see if it shows you any errors.Also check and make sure you are not having a overheating problem
 

Read other 1 answers
RELEVANCY SCORE 76.8

Hi, so I have had a powering issue with my previous power supply which was the Corsair CX600W so i purchased a newer power supply - the EVGA SuperNova G2 550W. I unhooked my old psu, hooked up my new one and the PC turned on and I turned it back off from the power button on the case. I also hava a boot drive problem so I unplugged the sata cables from my SSD and wanted to try to turn on the PC with only my HDD. I did this with the PSU switched off and the power cord unplugged. When I tried turning the PC on again the PSU made a clicking noise and nothing turns on. The motherboard Led's are lit up so it is definitely getting power but when I go to turn the computer on it just makes a quick clicking noise and nothing turns on. Any help is appreciated, thanks!
 

A:Power Supply makes clicking noise when I press power button

You may just need to drain the power off from the power supply and try again. Unplug the power to the power supply, press and hold the power button for 30 seconds, then plug it back in and try to turn on the computer again. If that doesn't put the old power supply back in and see if the PC works, or was the old one dead? If the PC works with the old one and not the new one then you may have gotten a faulty power supply.
 

Read other 2 answers
RELEVANCY SCORE 76.8

Had to up upgrade my power supply on my hp envy 750-116. The new power supply(500b evga) does not have a power cord for the slim laptop like drive. looking for possible fix for the problem
 

Read other answers
RELEVANCY SCORE 76.8

My g570 laptop is 4 years old, so probably time for a new one...BUT I'd like to get some more life out of this if I could.  Currently I'm running only on battery power. The power button (upper left right above the F1 key) is solid white however when I plug it in...it'll start charging for about 10 seconds and then it stops charging and the power button starts flashing white.  I've tried the shutting down, taking out the battery and pressing the power button and also holding the button to discharge. Still the same outcome. I've also tried turning it on with the battery removed and just the AC power source and it turns out and makes it past the Lenovo splash screen but loses power before getting to the windows loading screen.  Any other suggestions? Or should I just assume the charging circuit on the motherboard has failed and I should rescue my data while I can?

Read other answers
RELEVANCY SCORE 76.8

I have had my Hp laptop for 3 years now. It has been working perfectly, up until 2 weeks ago. It would not turn on when I clicked the power button. After clicking the power button, 15 minutes later I noticed it just came to life. Sometimes it doesn't turn on at all for days, but sometimes I click the power button and it boots within 15-30 minutes. When i click the power button, nothing happens at all for that duration. No fans, no lights nothing. The only light on is the power cord button that is always on when i plug it in. I did replace the power cord, and tried cleaning out the insides, it did nothing. Should i just replace the motherboard?

Ps. Hp pavilion dv6-6c43cl

A:Hp laptop takes 15 minutes to power on after clicking the power button

See if your mobo has a power switch on the actual board itself. Power it on that way and see if the problem persists

Read other 4 answers
RELEVANCY SCORE 76.8

Just got a dell inspiron running vista home premium 64. works fine, except each morning the power button is blinking blue and unit has to be unplugged- mouse does not wake it, pressing power button kicks all the cooling fans into high gear, but nothing more. i suspect that this happens when unit goes into sleep or hibernate mode. under 'power plan', "dell recommended" is checked.

ideas?

thank-you for any expert advice that you can offer

A:Dell- blinking power button- vista power mgmt?

Is it a desktop or Laptop?

Dell desktops are well known to have dodgy power units (hardware) installed.

Have you tried a cold reboot to see what happens?.....If you continue to have power issues call the Dell customer support and they'll send you a new power supply (for desktop).

Not sure about the laptops though.

Read other 1 answers
RELEVANCY SCORE 76

I am tech working on a friend's laptop. it will not power up or boot up.I tried all steps and done a hard reset, tried another ac charger and still won'tboot. I order a new power jack and replaced it but still no power. My friend bought this laptop closeto 2 years ago. is there any way to test motherboard. thanks for your help.

Read other answers
RELEVANCY SCORE 76

I recently upgraded Windows 7 to Windows 10. When I power down the system from the menu, my computer does not completely turn off. The procedure I use is described below:

Click Windows_Start_button > Power > Shutdown

The system closes applications and appears to initiate a shutdown procedure. Everything appears to be shut off, but my mouse is still lit up. I do notice that the fan stops and everything else appears to be completely shut down. When I was running Windows 7 before my upgrade, my system completely powered down.

I have a dual boot system with Linux, and when I power down from Linux, the shutdown is complete, so I don't think I accidentally did anything to the hardware or BIOS.

Has anyone else experienced this? I'm pretty sure there is some tweak in Windows 10 that would fix this, but I haven't found it yet. Thanks for any suggestions you might be able to offer.

A:Power down button does not completely turn computer power off

I found the solution on another thread. If you have this problem try the following:
1. Log in as an administrator.
2. Right click the Menu button.
3. Left click -> Control Panel > Power Options > Choose what the power button does > Change settings that are currently unavailable
4. Uncheck the box next to Turn on fast startup (recommended)
5. Make sure Hibernate is unchecked.
6. Left click Save changes.
The next time you shut down the computer, it will be completely powered off. At least this worked on my machine.

Read other 0 answers
RELEVANCY SCORE 76

I successfully powered up my Probook using the "Hard Rest" method outlined here, but there is no mention of the solution to this issue. This unit is six months old and has served entirely as a desktop with the AC adapter plugged in 100% of the operating time. How do I determine the source of this original issue (power button doesn't turn on machine)? How do I test the battery? If the battery is defective, how do I go about replacing it? Please advise asap! Thanks,

Read other answers
RELEVANCY SCORE 76

Greetings all, Shaun here, new to the forum.
Thought I would post this, so someone somewhere may see it one day, and it may help them. Also, maybe someone here has an idea as to what may be causing this, as I don't believe i have fixed the underlying issue, just allowed myself to continue using my machine for the time being.
So, got up this morning, made my coffee, went to the desktop - Dell Dimension 9150. Hit the power button, NOTHING. Looked at the button, and it was flashing amber, probably once every 4-5 seconds.
Great. Opened it up, checked all connections. Unplugged, held power button for 20 seconds or so, until the green LED on the MB went off. Unplugged all peripherals, plugged back in, same deal.
Opened up spare, non working PC, that has a known good power supply (700 watt), threw that into the Dell. Sane deal. Started reading different forums. Decided to try jumping the green wire on the main power cable (24 pin), WHILE PC IS PLUGGED IN. I found, that as long as I would hold the jumper into the green / black wires, it would start the fans up, everything sounded like it was starting up. Problem is, I was nervous, as I didn't know if this was going to damage anything, so i didn't want to sit there and hold it for any longer than I needed to. Well, as soon as I took out the jumper, the PC would go right back to being OFF, indefinitely.
Original power supply back into the Dell.
Read somewhere, that someone was able to jumpstart their power supply, then plug... Read more

A:Woke up to No Power Up, Flashing Amber Power Button

Replaced the motherboard battery lately?

Read other 1 answers
RELEVANCY SCORE 76

Please I need help, my system power light comes on and goes off immediately after I press the power button. Please what should I do?

Read other answers
RELEVANCY SCORE 76

Help me please my Monitor not powering On i tried another power cable but no lucky so how can i troubleshoot i check the warranty service 2019 till expire

Read other answers
RELEVANCY SCORE 75.6

Please help it worked fine for a while  after my daughter knocked it of the side but now it won't power on
I've tried different power adapters and still does the same thing
No power makes it to the computer at all, the yellow/ green light on the power transformer just goes out when it touches the computer  is there a safety switch on the mother board ?? I've tried it with everything disconnected
Ram
Harddrive
Processor
The battery
And still nothing
Does anyone have any suggestions ???

Read other answers
RELEVANCY SCORE 75.2

The tips I got with this Kensington 33197 power adapter have numbers stenciled on them like N3, N5, N19, etc. The tips sold on their web site make no mention of the "N" numbers and have numbers like K20059, K20050, etc. and there is no cross reference.

You can also see a complete reference for "N" numbers to all the laptops they support at the above link. Again, no mention of the numbers Kensington uses on their site.

I need a cross reference for these kinds of numbers.

Kensington referred me to their telephone tech support; but, there is a language or cultural barrier that prevents their understanding what I need.

Does anyone know of such a reference?
 

A:Need power tips reference for Kensington laptop power adapter

Read other 6 answers
RELEVANCY SCORE 74.4

Hi, Im sending this from a different computer. Two days ago, after my comp got stuck, I turned off the power button on tower.....now when press it, only name of company(gateway) appears briefly, then just a black screen with a little white cursor in top left corner---tried to enter into safe mode, no luck---is it power buttton?
---any ideas? thanks
 

A:computer wont power up/power button?

I had a similar problem once and someone told me its a virus attack.... Its probably the same for you too. I had to format the C: drive and re-install the OS then. You may try that too...
 

Read other 1 answers
RELEVANCY SCORE 74.4

I'm having issues with a Dell XPS 8500. The power button does not power on the computer at all. I tried the usual reseating everything including the battery and holding the power button in with no power cable. I ordered a new power supply and put it in but now realize it's for an 8700. The only difference is the 8700 psu has the test button and the 8500 doesn't.
If I hook up the computer to a monitor/keyboard/mouse and hold the test button in on the psu, the computer boots and functions as normal. If I let go of the test button it shuts off. Is there a way to turn the test button on all the time because that would fix it.
Is there a special way to test if the power button is broken? I unplugged the button on the board labeled F and I read something about using a screw driver to connect the pins to turn on the PC?

A:Dell XPS 8500 Power Button No Power

Hi,
Thank you for confirming all the troubleshooting steps that you have performed.
Now to confirm if the power button or the power button cable is faulty turn of the system and disconnect the power button cable which is connected to the motherboard.Then power on the system by connecting it to the wall socket then connect a monitor to the system ,we are trying to power on the system directly from the mains.
Hoping this helps.
Regards,

Read other 8 answers
RELEVANCY SCORE 74.4

need help please, picked up a hp g6-1326sa laptop the laptop had been just freshly factory reset, so when i got it home i installed all my bits rubish ect then ran windows update... well it took ages but founds lots of updates... but it froze up when downloading... could turn laptop off or anything so pulled power supply and pulled out battery which turned it of... so then batter back in power supply in press power button nothing, double checked battery all in ect, and light was on power suply ect still wouldnt power... read a few tricks ie takeing battery out holding power button for 15 secs up to 1 min in some cases.. then power supply in with out batter turn on nothig.... got miffed then started hitting alll keys the pressed f5 the world sign then it started to boot, but came up with hp web quick start up or something like that and asks for a password... but i have no password asked previous owner if there was any password they said no they restored and never put any password on.. so the only option i get is shut down which i do and it still wont start by poer button but if i hit f5  get same again any idea please i picked up for my kids for homework and its starting to turn out more hassle than it was worth thanks in adavance for any desperate help or advice needed

Read other answers
RELEVANCY SCORE 74.4

I first logged out of my computer and came back and I noticed an orange light on the power button. I shut it of and turn it back on about two times with the same results of an orange light. I then shut of the the extension that houses 10 plugs. When I turned on the extension I turned on the computer the power button didn't give off a blue light or orange light. The VGA cable, mouse, keyboard, Ethernet cable are all plugged in. I later removed all the connects to the computer gave it a minute and plugged it all back in. There is a solid green light on the back under the power cable. The fans turn on there is noise coming from inside the computer a soft humming and light fan from the back of the computer. But the power button will not turn on. The monitor light is orange and says "No Input signal Input 2,Go to Power Save." When I switch to input 1 it reads "Cable Disconnected Go to Power Save." What internal issue could this be?

Read other answers
RELEVANCY SCORE 74.4

Hey folks! Thanks for checking out my post, I've looked online, but couldn't find a solution, so I thought I'd make my own post. Some details: This laptop is an HP DV6-3064 ca. It was purchased refurbished about a year ago, and has had almost no problems to this point. I was at a friend's house using my laptop, and everything was working fine. Shut down, packed it up, took it home, pulled it out, pushed the power button, and nothing. I didn't leave it in the sun, or bump it on anything. Just brought it home and it wouldn't turn on, with no warning signs or anything. Now I looked into power issues and I can guarantee my battery as well as the AC adapter are perfectly fine. I also tried the hard reset but still get nothing. The light by the DC jack does not turn on when I plug it in. Now, I'm relatively tech-savvy, and since my laptop was no longer under warrantee I figured I'd check it out for myself. (Don't really have the resources to take it to a repair shop). The DC jack looked like it might have had some wear on it, so I ordered a new one from a reputable seller on eBay, replaced the old one, and nothing changed. I'm completely at a loss here. Weird thing is, when I have the laptop opened, and plugged in, I can feel the motherboard heat up a bit. Not sure if it's supposed to do that, but I know there is power going to it, even though the DC jack light still does not light up. If anybody has any insight, PLEASE let me know, and if you need any more info... Read more

A:HP DV6-3000 Getting NO power. No response from power button ...

Bannor,  The LED on the DC jack usually is an indicator of whether the AC adapter is working properly.  That light is on a different circuit and does not require a good system board.  If the light does not come on usually the adapter is bad. If you've already tested or replaced the adapter then the dc jack is the next step however when HP replaces this part in the repair depot they usually replace the entire board (with jack soldered on) at once.  You might consider replacing the entire board. Wes

Read other 5 answers
RELEVANCY SCORE 74.4

Hi everybody,

I tried to search on google about this, but it's not really help and it never happen to me before so I post here.

My PC was running normally for a long time, just couple weeks ago I sent my faulty video card (xfx nvidia 8800 ultra) to get warranty service and they sent me back another. The new one works fine, but a week later I tried to turn on my computer and there's no power at all. No lights on, no fan running, just no sign of power. So I check inside if there's any wire from the PSU is unplugged, but everything looks good, nothing seems wrong. I'm sure the power from the wall is good and the power switch on the back is on. So I tried to check the wired again, push the power cable to the mother harder and press the button, it worked. But that doesnt solve the problem, if I put something heavy near the PC or the desk is vibrating a little bit, the power turns off. I press the power button again it would not turn on until I open the case and press the power cable to the motherboard harder, it's on. I then close the side panel, it's off, no power.
This is really annoyed me, I dont know what else to do. What caused this problem? The power supply or the power button? Can somebody help me?

My system specs:
ECS G31T-M mobo, Intel E8400 Duo, 2x2GB RAM
2x2 SATA HD, nVidia 8800 ultra video card
ULTRA's 1000watt PSU
 

A:Power supply or power button problem?

Read other 8 answers
RELEVANCY SCORE 74.4

Hi there,

We've got 3 Dell precision towers 5810 that work great, except for a possible bios bug, which I can reproduce on all machines:

I'm using the installed NIC: Intel ethernet server adapter i210-t1.
Our computers go powerless every night (mains power) after a normal pc shutdown. Every morning, when the power is back on, I want to wake up all computers in our building with Wake On Lan (WOL) by sending a 'magic packet' over the network.
This normally works well if the machine has been switched on and off with the power button / windows shutdown. But when I unplug the machine (mains power), wait and plug in the mains power again, the computer does not respond to the WOL packet. (Maybe the PCI-E NIC does not get power on plugging in the mains of machine for the first time).
It works well on the integrated (motherboard) NIC. BIOS / power / sleep state settings seem to be ok.

A:Wake On Lan (WOL) not working on Dell precision tower 5810 with Intel ethernet server adapter i210-t1 at first power up / after no power

Hi paulnotebaart,Thanks for posting.Here is some information you may find helpful:http://dell.to/2gh5oM6

Read other 3 answers
RELEVANCY SCORE 71.6

Hello

Suddenly pc doesnt boot up we change with new psu and from that time pc power up by the time we connect the psu with power ,

i remove all cables i left connection psu with motherboard but still the pc power up by him self , i remove the cpu and then didnt power up ...
what the problem

A:Pc power up without press power button

Go into the bios and find something like "Self Power on" and disable it, then it shouldn't happen anymore.

Read other 1 answers
RELEVANCY SCORE 71.6

when i push the power button it does not light up. the computer starts but only the fan works (low at first then becomes loud)

Read other answers
RELEVANCY SCORE 68.4

Hi every one,
Recently I purchased new PC,
After installing windows XP Pro SP3 I found that there is a missing button in Power option properties. The missing button is (When I press the sleep button on my computer), I can find only (When I press the power button on my computer).
My system configuration is as follow
Mother board Gigabyte EP45-UD3R Rev 1.1
My graphic card is ATI Radeon HD 5670
Windows XP SP3
RAM 4Gb Kingston DDRII
CPU Core 2 Quad 2.66 GHz
It worth saying that I can shutdown, hibernate or put my PC into sleep mode, so the functions are working but only the button is missing.
I will appreciated very much if some can advise me how to restore the missing button. Is there some option in BIOS that will enable this button?
I contacted Gigabyte customer support, but they directed me to Microsoft, I also contacted ATI but they directed me to Microsoft or BIOS settings. In my BIOS I can't find any option that may affect this button. Any advise will be appreciated
Best regards

A:[SOLVED] Button of (When I press sleep button) is not available in my Power option pr

Does the case actually have a separate Sleep Button? I suspect it's not even connected, as the motherboard manual doesn't show a connection for a Sleep Button, only a Power Button.
Windows Power Options won't list it, as it doesn't exist.

If you have a Sleep Button on the keyboard, it might not be listed in Power Options either. That would be up to the Driver software to add that option. You may have to use the software that came with the keyboard to configure the sleep button on the keyboard.

Read other 7 answers
RELEVANCY SCORE 68

For the last two weeks, every time I start my Dell INSPIRON E1705 while using the power supply I am greeted with the following message. "The AC power adapter type cannot be determined. Your system will operate slower and the battery will not charge. Please connect a Dell 90W AC adapter or higher for best system operation". I press the F1 Key and everything works fine. I've read about this on other websites and most say it's a design flaw in the power supply after the cord has been properly wound around the supply as designed. Apparently a few of the cords internal wire strands become broken and cause this message. My computer is from June 2006 and shouldn't be having this issue so early...or ever. This seems like a flaw that should have created some type of manufacturers recall since so many people are having this issue. I'm of course out of warranty, will Dell replace this free of charge?
 
`

A:Power Supply - "The AC power adapter type cannot be determined....."

You are correct, the failure is due toloss of the power supply ID signal. Sometimes this happens because of strain on the plug, which breaks the signal wire. Some even are so severe that the insulation breaks away from the plug; this is due to rough handling. The other cause is one or more of the power socket solder connections to the system board become broken. This also is related to severe handling. I have seen one case where all three power connections and three of four mechanical connections were disconnected. If the power supply is bad, a replacement will cure the problem. If not, then the socket is bad, and this will require a system board replacement. If you are experienced, you can try to resolder the connections. I am experienced and was not able to get my daughter's E6000 to work by resoldered. More recent Dells are using a replacable power connection board which is a much cheaper repair.

Read other 64 answers
RELEVANCY SCORE 68

I know this is possible, because I've done it before (a long time ago). How do I change which browser comes up when pressing the web browser button that's to the right of the power button?  Google doesn't have an answer. 











Solved!
View Solution.

A:Web Browser hard button (next to power button)--how to chang...

Hey Peregrin72,  Great question! You could first try changing your default Internet Browser setting in Windows.  1. Click the Start button 2. Type 'default'3. Click Default Programs4. Click Set Your Default Programs5. Click on the desired browser and then click Set this program as default.  Let me know the results of that change. There is also a registry change that may help.

Read other 5 answers
RELEVANCY SCORE 68

hi guys the on /off button on the wifes laptop broke up and was replaced with a new betzel incorperateing the buttons, it was also noted that the button on the pcb underneath was badly damaged also replaced this part
however laptop will now not start at all, battery charge light on, and on/off button feels mechanically sound .

any thoughts greatly appreciated ( be gentle and plz anwser in plain simple terms as im not a techhead)
 

A:Solved: hp g60 lap top won't turn on after power button betzel & button pcb

Read other 8 answers