Over 1 million tech questions and answers.

Help Windows 7 error 0x80073712

Q: Help Windows 7 error 0x80073712

Hi all, I'm trying to install a vodafone mobile internet wifi desktop computer with windows 7 and no wireless network card, I allow, that supplied no cd for any software installation, in fact connecting the device to the pc with usb , the setup of the 'installation will start automatically.
My problem is that it is successful the 'installation, at some point, it stops and windows gives me the following error: An error occurred During the installation of assembly component (98CB24AD-52FB-A01F-DB5F-C88389A1E18E) HRESULT : 0x80073712. l 'installation is not completed and is canceled.
C 'is someone who can help me with this problem? I did research on google, but honestly, I have not found anything concrete, has what it refers to this error code, some say it's a problem of Net framework 3.5, but others, it's a problem of windows update.
I thank in advance anyone who can give me a hand

RELEVANCY SCORE 200
Preferred Solution: Help Windows 7 error 0x80073712

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Help Windows 7 error 0x80073712

Let's start with some basic stuff...

Please follow the Windows Update Posting Instructions and post the requested data

Read other 1 answers
RELEVANCY SCORE 65.2

I'm currently trying to get this PC updated ( father's ).

I managed to update all important ones besides the SP1.
When trying to update via update tool or manually it fails with the code 80073712.
After running the SURT and a sfc /scannow my CheckUSR looks liek this.

17 error found 11 fixed. 6 remaining in the log below.

Any and all help would be greatly appreciated!

Read other answers
RELEVANCY SCORE 65.2

So I've read the rules and stuff, and so I've tried your suggestions so I've decided to finally post here again(upload didn't work) so here's my second try.(also when I use sfc /scannow I get Windows resource protection could not perform the requested operation.)

Read other answers
RELEVANCY SCORE 65.2

Please help.
SFC Scannow: Windows resource protection could not perform the selected operation
SURT: works but didnt fix the error
also I couldnt upload the CBS file it keeps breaking so I only uploaded the CBS.log file sorry

Read other answers
RELEVANCY SCORE 64.4

Hi,

I've come across a Windows 7 Professional SP1 x86 system which attempts to install

KB3108664 daily, and fails daily with error 0x80073712. It has been doing this for weeks and weeks.

Please note: All other Windows updates both before and since are updating successfully. Only KB3108664 is failing.

What I have tried already:


sfc /scannow - cleanSystem Update Readiness ToolWindows 7 Update Troubleshooter - several times
All run successfully.

But KB3108664, and only KB3108664, continues to fail every time with error 0x80073712, both when run through Windows Update, and also when downloaded and installed manually.

I looked at LOGS\CheckSUR.log, and something is definitely wrong with this update. But I do not know how to interpret what I am looking at or what to do next.


If you need any further info, please let me know.

Thanks in advance for your help.

----------

CheckSUR.log follows:


=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2017-01-04 10:22

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f)    CBS MUM Corrupt    0x800F0900    servicing\Packages\Package_2_for_KB3108664~31bf3856ad364e35~x86~~6.1.1.0.mum        Line 1:

(f)    CBS Catalog Corrupt    0x800B0100    servicing\Packages\Package_2_for_KB310... Read more

Read other answers
RELEVANCY SCORE 64

Hello,
The windows update keeps offering me the same update (KB2887595) over and over again (even after I reboot). The installing information says it failed every time I try and after the attempt to install it says "Not needed"

Code:
Update for Windows 8.1 for x64-based Systems (KB2887595)
Installation date: ‎17/‎11/‎2014 21:51
Installation status: Failed
Error details: Code 80200056
Update type: Important
Install this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.
More information:
http://support.microsoft.com/kb/2887595
Help and Support:
http://support.microsoft.com



If that doesn't happend, I receive an error after trying to installed (still with Windows Update). Here is the details for that failed attempt:

Code:
Update for Windows 8.1 for x64-based Systems (KB2887595)
Installation date: ‎18/‎11/‎2014 00:24
Installation status: Failed
Error details: Code 80073712
Update type: Important
Install this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.
More information:
http://support.mic... Read more

A:Windows Update: Failed KB2887595 /error 0x80073712

Fixed after a using restore point previous to the first attempt install

Read other 1 answers
RELEVANCY SCORE 63.2

Hey all, I have a lenovo tower running windows 7 home premium service pack 1, all seems to be working great except when I go to do updates, every update is installed except this one nagging one that fails repeatedly.

The Update is Security Update KB2847927 and the error code is 0x80073712

When the update didn't install I hit help that took me to this page
Windows Update error 0x80073712

I ran the System File Checker tool as administrator in cmd prompt sfc /scannow when it finished it said Windows Resource Protection did not find any integrity violations.
I tried again to install the update but it failed.

The next step was to download and install the System Update Readiness tool, installed that, said finished after about 5 mins (read that it appears to hang but just let it go) and yeah it seemed to install but after that the update still won't install fails with same error code.

That's where the microsoft page stops in terms of what to check or do, so now I come to the group hoping to find some answers.

I read the page that showed the steps to reporting about an error and have attempted to attach my cbs.zip file but it keeps saying
500 - Internal server error.
I am supposed to be attaching the entire cbs folder saved as a zip then uploading that cbs.zip correct?
It's showing as 27.3MB is that too big? For me everytime I try to upload that zip file I just get that server error, I will try again after I post the thread if there is anything else I am missing detail w... Read more

A:Windows 7 Home Premium SP1 - repeated update error 0x80073712

I have tried repeatedly to upload my cbs.zip file it just errors out I am guessing due to size, should I just upload the files one at a time here vs all as one zip file?

Read other 9 answers
RELEVANCY SCORE 60.8

Windows 10 Pro (version 1607, Build 14393.51) won't update. I think it may be affecting other hardware because I can't get my wireless display dongle to work - which did work before a previous windows 10 update.

I don't know if this is relevant but the wireless display dongle stats are:
Company: DiamondP/N: WUSB DongleM/N: WPCTVTXDriver: DisplayLink USB Graphics Software for Windows 8.0 M2.exe (Won't work correctly.)

The main goal is fixing Windows Update. Maybe if we can fix that, the dongle might work.

Anyways, sfc /scannow gives me




Windows Resource Protection could not perform the requested operation.



both after a regular boot and while run in safe mode.

Read other answers
RELEVANCY SCORE 57.6

OK, I'm pretty *** right now!

I bought my laptop brand new in September with Vista preinstalled. I tried to update the system but I couldn't because apparently Microsoft *** up Vista so bad that they didn't even bother testing it properly before the release date to see if it works at all. As we all know, Microsoft is in a monopol market position so it can treat its customers in whatever *** way it wants to.

Ok, enough of the vent.

I spent 1 week tring to figure out how I can update Vista because I kept getting error 0x80073712 all the time. It turned out that the problem was that when Microsoft released Vista, some of the system files were corrupt, and that prevented me from updating. What's more, I was also informed that I could only resolve this issue by reinstalling Vista from CD which I did not have, because I got it preinstalled on my laptop! So, there is no way I can ever get any updates?!?? Naturally, the information that I found on the Microsoft support page was a piece of **.

(The "Windows Features" dialog box is empty in Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0x80073712")

Nevertheless, I still did a system scan, and it didn't produce any results, just as I expected.
After one week of struggling to find a way out of the ** microsoft kindly dumped on me, I found a tweak on another forum, which finally worked!! I had gone through like 10 different solutions bef... Read more

A:error 0x80073712 AGAIN

Let's see if we can post without all of the explicatives next time shall we. They have been removed.

Shawn

Read other 4 answers
RELEVANCY SCORE 57.2

I have got error 0x8007371 when I tried to install .netframework 3.5 which was required to install windows essentials.
I ran DISM command to fix 0x80073712 error, and received another error message in the command prompt: Error 14098 Component store has been corrupted.
THen I ran sfc/scannow which gave another error "An error occured during installation of assembly component".
This is such a bul grab, can someone help
Thankz

Read other answers
RELEVANCY SCORE 56.8

  
Quote: Originally Posted by niemiro









  
Quote: Originally Posted by lafargeotte


Any suggestions please.

Windows update error today (Win7 Ultimate).
Suggested run sfc /scannow.
Ran it from elevated command prompt, and it stopped after just a few seconds saying no errors found!
I expected it to run for a few minutes at least.

Anyone had this before?


Hello!

Yes, I have seen it before. It is not exactly uncommon. In all previous cases that I have dealt with, it has always been in error. Looking over the CBS.log file showed that SFC did in fact scan very few, or no, files. Often the CBS.log actually showed an error which SFC did not graphically report. In my experience, there are certain errors which SFC cannot recover from. In these cases, it stops part way with a 'Windows Resource Protection could not perform the requested operation' error message. When it finishes too fast, despite claiming success, it often has had one of these fatal errors anyway, if I remember correctly.

Now, I could take the CBS.log, and see what seems to be going on, but if you ask me, it isn't worth it unless you have a problem. If your computer has a problem, which is why you ran SFC, then I shall take a look, but if all seems well, then you risk more by fiddling.

Richard


Hi Richard,

During the last routine windows update I had 2 updates flagged.
One updated OK (I think it was just for ... Read more

A:Error code 0x80073712

Hello Paul!

Thanks for letting me know about that error

Error code 0x80073712 maps to ERROR_SXS_COMPONENT_STORE_CORRUPT. This error is one of the few which can cause SFC to fail. These two are definitely linked.

As you have seen, SFC is not robust enough to deal with corruptions when its store copy is also corrupt. It can deal with problems when it has a clean store, but a corruption elsewhere, but when its store is damaged, it fails.

Therefore, we need a second tool downloaded from the internet with its own store built into the download to identify problems in the store. I also intend to take a copy of the CBS.log, just to diagnose what exactly is corrupted, how badly is is corrupted, how to fix it if it is possible to fix, or whether it does not actually need to be fixed (I doubt this scenario). At the moment, I am just diagnosing what is wrong, and what needs to be done.

Please download this independant tool (the System Update Readiness Tool) from here: Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows 7, and for Windows Server 2008 R2 and install it.

Once it has installed, please copy the C:\Windows\Logs\CBS folder (the whole folder, please) to your Desktop, right click on it > Send to > Compressed (zipped) folder, create a new thread in this forum: http://www.sevenforums.com/windows-updates-activation/ (It is better to keep something like this in its own thread, and leave this thread for simple on... Read more

Read other 9 answers
RELEVANCY SCORE 56

Hello.

I have a problem with update KB2891804 - error code 0x80073712. In checksur.log there are too many errors. ? will be able to help in a similar way? thanks in advance.

A:Win7 sp1 x32 - Update error 0x80073712

Shouldn't be too much of a problem - here's the list of errors...

Code:
Unavailable repair files:
winsxs\manifests\x86_microsoft-windows-msieftp_31bf3856ad364e35_6.1.7601.18300_none_1862e28bac1f4f05.manifest
winsxs\manifests\x86_microsoft-windows-msieftp_31bf3856ad364e35_6.1.7601.22496_none_189131c6c5808252.manifest
servicing\packages\Package_1_for_KB2891804~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_1_for_KB2891804~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_for_KB2891804_SP1~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_for_KB2891804_SP1~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_for_KB2891804~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_for_KB2891804~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_1_for_KB2891804~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_1_for_KB2891804~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_for_KB2891804_SP1~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_for_KB2891804_SP1~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_for_KB2891804~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_for_KB2891804~31bf3856ad364e35~x86~~6.1.1.1.cat
I'll post a fix protocol later.

Read other 3 answers
RELEVANCY SCORE 55.6

Hello.

I have a problem with update KB2943357 - error code 0x80073712. In checksur.log there are too many errors "CSI Manifest All Zeros". How can i fix it?

A:Win7 sp1 x64 - Update error 0x80073712 (KB2943357)

Here's the list of Manifest errors...

Code:
Unavailable repair files:
winsxs\manifests\msil_smdiagnostics.resources_b77a5c561934e089_6.1.7601.18523_ru-ru_97c35378c456bec3.manifest
winsxs\manifests\msil_system.identitymodel.resources_b77a5c561934e089_6.1.7601.18523_ru-ru_2692f4576e21152b.manifest
winsxs\manifests\msil_system.runtime.serialization_b77a5c561934e089_6.1.7601.22733_none_bff6ca10b626f70a.manifest
winsxs\manifests\msil_system.identitymodel_b77a5c561934e089_6.1.7601.18523_none_f1b7e3b500b0dd75.manifest
winsxs\manifests\msil_system.runtime.serialization.resources_b77a5c561934e089_6.1.7601.18523_ru-ru_dda628c145093d26.manifest
winsxs\manifests\msil_smsvchost.resources_b03f5f7f11d50a3a_6.1.7601.22733_ru-ru_0110a80768b1b8ed.manifest
winsxs\manifests\msil_system.servicemodel.washosting_b77a5c561934e089_6.1.7601.22733_none_7b9fe117b7a77077.manifest
winsxs\manifests\msil_system.servicemodel_b77a5c561934e089_6.1.7601.22733_none_627b1e3960ee4846.manifest
winsxs\manifests\msil_system.servicemodel.resources_b77a5c561934e089_6.1.7601.18523_ru-ru_74761edf3be633ba.manifest
winsxs\manifests\msil_system.identitymodel.resources_b77a5c561934e089_6.1.7601.22733_ru-ru_0fc64dbd87c78ed9.manifest
winsxs\manifests\msil_system.servicemodel_b77a5c561934e089_6.1.7601.18523_none_7947c4d34747ce98.manifest
winsxs\manifests\msil_system.runtime.serialization.resources_b77a5c561934e089_6.1.7601.22733_ru-ru_c6d982275eafb6d4.manifest
winsxs\manifests\msil_smdiagnostics.resources_b77a... Read more

Read other 9 answers
RELEVANCY SCORE 55.6

Hi,
When I tried to install vista SP1 I had 0x80073712 error
So in installed KB947821 and ran sfc /scannow
SFC told me there is damaged file but it cannot repare.
Here is my CBS.log
Now I try to run SP1 again and I have 0x800F082F error
 
Thanks for your help

Read other answers
RELEVANCY SCORE 55.6

Good afternoon! From what I've seen in a Whole Lot of Googling, this forum seems to have the most targeted, successful support for the kind of issue I'm seeing.

I've been running Win7 Home Premium for a few years, and every single Windows Update has run successfully (with a snag now and then) except SP1, which returns error 0x80073712 every time.

I've disabled SpyBot S&D and AVG Free, but MS Security Essentials is still running.

I ran SURT (Windows6.1-KB947821-v34-x64), which completed.
(And I discovered I've been attempting to resolve the issue with SURT since September 2012, v22!)

Ran SFC scan as Admin:

Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.

Collected CBS.zip from C:\Windows\Logs

Attempted update again.

New error code: 80070002. Followed WinHelp to stop Windows Update service, deleted temporary update files, restarted update service, checked again for updates.

Attempted update again. Found 1 critical (SP1) and 2 optional. Didn't note what they were.

Cancelled install during Win Live Essentials 2011 update. Restarted SP1-only update.

80073712 returned.

Re-collected CBS.zip from C:\Windows\Logs

(I tried to attach CBS.zip, but at ~30MB, it's well over the 8MB limit. Any particular logs you could use instead?

Thanks!

A:SP1 Update repeatedly failing, error 0x80073712

Ran Windows6.1-KB947821-v34-x64 again, attempted SP1 update again, failed with 80073712 again.

Ran WindowsUpdateDiagnostic again, which reported "Windows Update error 0x80073712(2015-07-21-T-12_43_39A) Not Fixed"

Read other 9 answers
RELEVANCY SCORE 55.6

hi i have problem with update and a lot of problem in win7 like when i install vcredist_x86.exe(c++) pop up this error 0x80073712 and i can't install autodesk maya because (c++) don't install help me plz
CBS FILE:
Attachment 333574

and i used hotfix tool and sfc/scannow but when i use sfc/scannow say:

A:win7-32bit error 0x80073712 attached CBS

CheckSUR shows the following problem...

Code:
Checking Packages
(f) CSI Unable to Query Store Version 0x00000002
SFC show this...

Code:
2014-09-16 23:36:37, Info CBS NonStart: Checking to ensure startup processing was not required.
2014-09-16 23:36:37, Info CSI 00000004 No store version format found; DLL store format 0.0.0.6
2014-09-16 23:36:37, Error CSI [email protected]/9/17:06:36:37.670 (F) d:\w7rtm\base\wcp\componentstore\storelayout.cpp(6636): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression: (null)
[gle=0x80004005]
I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.

Read other 1 answers
RELEVANCY SCORE 55.6

Hi!
First of all, please forgive my real clumsy English - I hope it's at least understandable.

I have difficulties with the last MS patch (July 9), the KB 2844286 (something with .NET Framework 3.5.1) doesn't install. I tried first to delete the accompanying Files KB 2832414, 283946 and 2840631 and then a re-updating, but again for the KB 2844286 fails with the

error 0x80073712 (error_sys_component_store_corrupt)

The checksur.log shows several errors (cbs.zip)

sfc /scannow shows one error with wimgapi.dll (hashmismatch) which cannot repaired, because source file is also corrupted (sfcdetails.txt).

lossless repairing with the Win repair system isn't possible, because user-, program- and windows-folders are not in the same partition.

In other threads, I saw very profund and competent answers, so I hope someone can help me too!

Appreciating your help very much!

A:Win7x64 Update Error 0x80073712 with KB 2844286

  
Quote: Originally Posted by monolake



The checksur.log shows several errors (cbs.zip)

sfc /scannow shows one error with wimgapi.dll (hashmismatch) which cannot repaired, because source file is also corrupted (sfcdetails.txt).


Sorry, seems the attachment hasn't been uploaded...

Read other 9 answers
RELEVANCY SCORE 55.6

I am having the exact same problems as the people who opened these threads:
csi unable to query store version
CSI Unable to Query Store Version Total count: 1

I have windows 7 Home 64bit

Things that have failed:
- Check For Updates always fails with the error code: 80073712
- sfc /scannow produces "windows resource protection could not perform the requested operation"
- turn windows features on or off produces an empty window.
- system update readiness tool produces 1 error "csi unable to query store version"
- Installation of SP1 fails with: ERROR_SXS_COMPONENT_STORE_CORRUPT(0x80073712)

I also did a remote session with a real microsoft tech and after trying a few things, they just tried to get me to buy their $149 "advanced tools" garbage.

Attached:
- CBS FOLDER ZIPPED (includes CBS.log and CheckSUR.log)
- WindowsUpdate.log
- FILE: C:\Windows\System32\config\COMPONENTS
I really appreciate any help!

A:Update Error 80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT(0x80073712)

Looks like bad news, I'm afraid...

Code:
Checking Packages
(f) CSI Unable to Query Store Version 0x00000002
64-bit Windows usually has a COMPONENTS hive of 38-60MB - and yours is only 28MB
Opening the file in a Hex editor, it's obvious that something has totally corrupted it - it appears to be an extract from a CBS.log file!

Unless you have a System Restore point that's from before the problem started, then I'm afraid that your only options are either a repair install or a clean install.

Read other 5 answers
RELEVANCY SCORE 54.8

Tried installing the Service Pack and I get the following:

An internal error occurred while installing the service pack.

Error code: 0x80073712.
See Search Microsoft.com for details.

But when I try that URL I get a Microsoft Search Page with nothing else. Any ideas? Thanks.

A:Vista 64bit SP1 Problem - Error Code: 0x80073712

try

[Vista] error code 80073712 - dslreports.com

Read other 1 answers
RELEVANCY SCORE 54.8

Hello,

Could you help me with KB3071756.
Update is failing to install with following error code:

Installation Failure: Windows failed to install the following update with error 0x80073712: Security Update for Windows 7 (KB3071756).

See my CBS logs in attachment (divided into 3 files due to big size )

Thank you in advance!

Read other answers
RELEVANCY SCORE 54.8

Can someone help me?
I tried to install Microsoft Access database engine 2010 (file ver. 14.0.6119.5) but I got error message:
"Error 1935. An error occured during the installation of assembly component {9DA4DC8A-9731-3F0E-8BD5-FC17CA6848AD}. HRESUL: 0x80073712"

I tried to install this DB provider on computer with
WIN7 prof. 64-bit (DELL) SP1
MS Office 2013 32-bit.
.NET Framework 4.5.1

I tried to reinstall .NET Framework (I found some procuderes how to solve this kind of errors) but without success, still the same error message.
I have also similar computer with the same configuration (Win7 Professional 64bit + Office 2013 32bit + .Net 4.5.1) and installation succeeded without problems.

Have anyone some idea how to solve this problem? Thanx

A:Cannot install MS Access DB engine 2010 - Error 0x80073712

Hi tsarbomb, welcome to Windows Seven Forums.

Have a look at these MS website & see if it helps you. Read through them first & see if the solutions fit your problem.

https://www.microsoft.com/en-au/down....aspx?id=13255

This one might help you as well.

Error 1935. error during installation of assembly... - how to fix? - Microsoft Community

Read other 1 answers
RELEVANCY SCORE 54.8

I've done everything here with no fix: Error Code 0x80073712 occurs in Windows Update or Microsoft Update

I've done everything here with no fix: KB2919355 (Windows 8.1 Update) Fails (800f0092 and - Microsoft Community

These are the only solutions that i can find and i've done both of them and neither has worked or they've given me additional errors such as the troubleshooter just telling me it couldn't fix it and the second one saying invalid package.
In a week now i won't be able to get updates to Windows because of this stupid update so i'm desperate for help hoping that there is something i've missed over the 500 google search results i've gone through.
I also want to make it clear that I CAN'T WIPE THIS PC under any circumstances unless there is no other possible option. If it truly is the only option than I'll do it but it's going to be months until i have the time to actually do it.


I have tried the DISM healthrestore, it failed with:
Error: 0x800f081f
DISM failed. No operation was performed.


I have tried the dism /online /remove-package /packagename:Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14 it failed with:
Error: 0x800f0805

The specified package is not a valid windows package.

Again i need to make it very clear that i can't wipe my PC right now. It will be weeks if not months until i can wipe this machine and it is the only one i can use right now. And to be completely honest i shouldn't have to wipe my PC b... Read more

A:update KB2919355 Error 0x80073712. all fixes failed.

If you are still having a problem installing the latest KB2919355, zip up the files under c:\windows\logs\cbs and share them out on OneDrive, and I will take a look.

Read other 3 answers
RELEVANCY SCORE 51.6

I've tried installing the latest updates, Vista SP1, and even the WU client update. I get the same error every time. What is the cause of this? Is there a fix aside from using HP Recovery?

A:Windows Updates continuously failing. (0x80073712)

Did you install these important updates before trying to install SP1?
KB935509, KB938371, et KB937287

Read other 13 answers
RELEVANCY SCORE 51.6

Greetings

For few days I'm fighting and trying to install SP1 but it fails every time. I did all other updates without problems. Tried many tips and fix ideas on internet, SURT, SFC Scan, Diagnostic, some things in control panel to help with Windows Update.. completely nothing helps.

It gives me 0x80073712 error code and CheckSUR file says:

Unavailable repair files:
winsxs\manifests\x86_microsoft-windows-s..ologies-webcontrols_31bf3856ad364e35_7.1.7600.16395_none_39bc056e339474f4.manifest
winsxs\manifests\amd64_microsoft-windows-s..ivationtechnologies_31bf3856ad364e35_7.1.7600.16395_none_89cb1e5f7a64822b.manifest
winsxs\manifests\amd64_microsoft-windows-s..ologies-webcontrols_31bf3856ad364e35_7.1.7600.16395_none_95daa0f1ebf1e62a.manifest

I have no idea what else I can do. I'll be very grateful for help, hope you will know what to do. Thanks in advance
CBS.log

Read other answers
RELEVANCY SCORE 44.4

hi there
windows 7 ultimate sp1

everything works normal but

blank windows features on off
blank installed updates
sfc /scannow gives "Windows Resource Protection could not perform the requested operation"
CBS.LOG excerpt:

CBS Failed to get CSI store. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT

CBS Failed to initialize store parameters with boot drive: and windows directory: [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]

CSI 00000134 No store version format found; DLL store format 0.0.0.6

CSI (F) d:\win7sp1_gdr\base\wcp\componentstore\storelayout.cpp(6636): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression: (null)
i tried repairing from windows installation disk
i tried chkdsk /r
i have no restore point
expert advice please (i dont want to reinstall windows)
help me
thanks

A:0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT

i have solved the problem by reinstalling windows.
what a shame for microsoft

Read other 1 answers
RELEVANCY SCORE 43.6

Hi,
I'm trying to update this laptop running Win7 with no SP1. Since i got a limited traffic ISP plan i downloaded SP1 (windows6.1-KB976932-X86.exe) and im trying to install in like that, though it fails when updating through windows update (i cant be 100% sure but I think with the same error code).
The error it presents at the end in the Details is ERROR_SXS_COMPONENT_STORE_CORRUPT(0X80073712).
Downloaded and ran SURT (Windows6.1-KB947821-v34-x86.msu), it just completed, retried to install SP1 and got the same error.
Ran sfc /scannow and got this
Code:
...
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.log
...
My CBS.zip is in the atachments.

A:SP1 failing to install, 0X80073712

Here's the CheckSUR error list...

Code:
Summary:
Seconds executed: 1401
Found 2 errors
CSI Manifest All Zeros Total count: 2

Unavailable repair files:
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7600.20935_en-us_4fdd65da8f1fc992.manifest
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7600.16789_en-us_66afb31075744e72.manifest
I'll post a fix protocol later for that
The SFC errors only relate to these missing files, so hopefully that'll be fixed when we repair them as well.

Read other 4 answers
RELEVANCY SCORE 42.8

The latest patches fail to install and I have gone through the threads to try and correct the problem with recommended actions but the problem still persists.


I've attached the required files and successfully complete the SURT and SFC actions without errors as per the Windows Update Posting Instructions .
I've also included the ever useful event log entries as well. Can anyone help?

FDISK could be my next option...but I prefer the learn rather than surrender.

Installation Failure: Windows failed to install the following update with error 0x80073712: Security Update for Windows 7 for x64-based Systems (KB2799494).

Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2789645).

Installation Failure: Windows failed to install the following update with error 0x80073712: Security Update for Windows 7 for x64-based Systems (KB2769369).

Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2756921).

Installation Failure: Windows failed to install the following update with error 0x80073712: Security Update for Windows 7 for x64-based Systems (KB2790113).

Installation Failure: Windows failed to install the following update with error 0x80073712: Security U... Read more

A:Winows Update errors 0x80073712 & 0x80070002

You have almost 200 missing files according to the CheckSUR report - but none, according to the SFC report.
This indicates some major mismatch between the registry and the file system.

A repair install is your best and quickest repair option.

Read other 3 answers
RELEVANCY SCORE 32
RELEVANCY SCORE 30.4

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

Read other answers
RELEVANCY SCORE 30.4

I'm running Windows 7 Pro on my Dell laptop. This laptop has been in storage and hasn't been turned on in a year. Originally, all I wanted to do was use iTunes. The problem:
 
It made me update it in order to use it, but I got an error.
 
I un-installed it and tried downloading a fresh copy and I get the following error:
After some Googling, I read that not having the latest Windows .NET framework might be the problem. Sounded reasonable so I fired up Windows Update but that gave me an error and wouldn't start checking for updates.
 
I managed to get it to check for updates, but now when it starts the process, I get the following:
I Googled the error code "8007007E" and tried a few things to try and fix it.
 
I downloaded the windowsupdatediagnostic.diagcab, found on Microsoft's site, here:http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
I tried resetting the Windows Update reset tool, using "MicrosoftFixit50202", found here:http://go.microsoft.com/?linkid=9665683
I download the system readiness tool, found here:https://www.microsoft.com/en-us/download/details.aspx?id=3132
I tried a clean boot.
 
I tried renaming the Windows Update Softwaredistribution folder.
 
None of this worked.
 
I ran the System File Checker tool (SFC.exe) and the results said I had bad files, but I don't know how to fix them. It generated a CBS log, which is too large for me to post (10MB) , so I've uploaded to dropbox,... Read more

A:Windows update error.. System File Checker integrity error..iTunes install error

Open the Command Prompt, copy and paste the commands below one at a time followed by pressing Enter after each command.
 
net stop wuauserv
 
rmdir /s %windir%\softwaredistribution\wuredir
 
net start wuauserv

Read other 9 answers
RELEVANCY SCORE 28.8

Hi,
 
I'm currently trying to fix a computer that has the "Windows Error Recovery" error which doesn't let me login. All of this started after cleaning a virus. The computer was acting goofy so I decided to scan it using the Microsoft Security Essentials and it actually found one but it said that it was partially removed and it suggested to download a utility (I don't remember the name) to do an offline scan, I downloaded this utility to a USB drive and boot from the USB, it did its thing and it actually found the virus again and this time it removed it completely, after this I tried rebooting my computer and it’s when I got the "Windows Error Recovery" error.
 
"Windows Error Recovery" Screen:
All I see is a screen with the following options...
 
Launch Startup Repair (recommended)
Start Windows Normally
When I select the first option, it tries to fix the error but after a while it shows a message saying that the problem couldn't be repaired. The second option basically brings me back to the same screen described above.
 
The other thing I have tried is the Advance Boot Options...
 
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Enable Boot Logging
etc ...

 
But all of the above options take me back to the "Windows Error Recovery" screen.
 
Any idea how can I bypass this screen? 
 
All I want is basically be able to login to backup my files and then reformat it. I refused to the idea of reformatti... Read more

A:How to bypass "Windows Error Recovery" error screen in Windows 7

Download an ISO for Linux Mint and burn it to a DVD or install to USB (you can use Rufus for this).
 
Boot the computer fromthe DVD/USB and you will then be able to copy all your data to a USB flash drive/external disk.

Read other 13 answers
RELEVANCY SCORE 28

I am using a WD Proxkey DSC and while signing I am getting the following error"
"The Windows Cryptographic Service provider reported an error: The parameter is incorrect. Error Code: 2148073511"

Read other answers
RELEVANCY SCORE 27.6

Quote:
Fix Windows 7 Error ?Windows is Not Genuine? Error code 0?80070005
Slowly Windows 7 bugs are getting uncovered, recently we had provided fix for Windows 7 WMP 12 flickering issue, Windows 7 Black Screen of Death issue. Now here is yet another issue found in Windows 7. The issue is related Windows 7 activation and genuine copy.


Source -
Official Windows Magazine | Fix Windows 7 Error ?Windows is Not Genuine? Error code 0?80070005
or -
Convert Pirated Windows 7 to Genuine & Fix Windows is not Genuine Error Code 0x8007000

A:Fix Windows 7 Error “Windows is Not Genuine” Error code

  
Quote: Originally Posted by JMH







Quote:
Fix Windows 7 Error ?Windows is Not Genuine? Error code 0?80070005
Slowly Windows 7 bugs are getting uncovered, recently we had provided fix for Windows 7 WMP 12 flickering issue, Windows 7 Black Screen of Death issue. Now here is yet another issue found in Windows 7. The issue is related Windows 7 activation and genuine copy.


Source -
Official Windows Magazine | Fix Windows 7 Error ?Windows is Not Genuine? Error code 0?80070005
or -
Convert Pirated Windows 7 to Genuine & Fix Windows is not Genuine Error Code 0x8007000


So in essecne,the genuine version is bugged so that it says not genuine,Microsoft give a fix which enables ANY version ,legit or not to be used??

Read other 1 answers
RELEVANCY SCORE 27.6

iI can not install any application windows installer. I have windows 8 and it asks me always an error message that will not let me install anything from windows installer. Appears to me always an error message: "Error 1723. There is a problem with this
Windows Installer Package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor."

There is no problem with the installation package. I installed the same package on another computer. I have a defect in the windows installer will not let me install any program. Anyone know how to fix?
Thanks :)

A:windows 8: error windows installer - Error 1723

this code means RPC_S_SERVER_TOO_BUSY. Have you tried a reboot? This something fixes issues."A programmer is just a tool which converts caffeine into code"

Read other 4 answers
RELEVANCY SCORE 27.2

Hi All
system info : HP LAPTOP DV6 -1256tx , windows vista sp1 32 bit
When I am trying to install windows vista sp1 from recovery disks/partition I am getting the error from recovery manager prompting me to choose either to retry or see the details for failure : CTOERROR.flg in form of notepad on my desktop. I have done retry 100 times but to no avail. I cannot restart after this recovery failure message as it shows dialog box on restart: windows security update is not installed successfully or is not trusted.So, i have to go through recovery process again to see the desktop (everything functioning - internet,video, music all) but only once.
Last time i got this message too . When i did installing windows from recovery disks few months back, that time i figured out to install all imp. updates through automatic windows update.All the updates were installed successfully and then it restarted and gone through process of language settings,time settings and all....
But this time when i am trying to update windows, i am getting windows update error 0x643 which is for security update for .net framewrok 3.5 sp1 and family update.I do know the answer how to get away with this error from "windows help" and also from this forum too, which asks for installing .net framework updates from windows update site directly. But the problem is:
Windows update ask me to restart after automatic or manual windows update installation takes place and restart causes problem as it shows d... Read more

A:Windows vista recovery error CTOERROR.f​lg and following that error 0x643 while insta

Do you have the original (no SP1 or SP2) Vista installed? You won't be able to install SP1 otherwise.

Read other 7 answers
RELEVANCY SCORE 27.2

I get all those messages at start up, plus superfetch has stopped working, and sometimes windows explorer has stopped working. I know it's some type of virus from something. So far safe mode has been working (slowly). Yesterday I had a friend reinstall(?) vista on it so I'm not sure if it would qualify as a legal copy or not anymore but it was actually much worse before that. It couldn't even start up right normal or safe mode.

it is a hp G60t-200, and the OS is vista, I'm not sure what other info would be needed for this. Please help if you can.

Read other answers
RELEVANCY SCORE 27.2

I have windows live mail 2008 Build 12.0.1606 installed on windows xp and everytime a few seconds after i close wlm i get a windows live mail encountered a ploblem and has to close error that tells me to send a report..this happens 80 percent of the time after i close the windows live mail application...By the way i have disable error reporting checked on advanced properties and disabled on services also ...i noticed on the task manager that the wlmail exe process is still running after i close the application and that seems to be the problem..Is there any way, fix or some program that i can get the wlmail.exe process to close at the same time i close the windows live mail application so i dont get this send error report message anymore ?

error i get ^

wlmail.exe still running after closing application ^

A:windows live mail 2008 (Build 12.0.1606) error report error

Hi gbp007,

Try to End Process the extra wlmail.exe file in the Task Manager Processes to see if it will stop the error for you next time.

Task Manager - Open and Close Applications and Processes

Shawn

Read other 13 answers
RELEVANCY SCORE 27.2

Hello everyone,
I recently had a virus on my Windows xp computer (one of those ones that pretends to be an anti-virus program telling you your computer is infected). Before I had the chance to remove it I found I was unable to start up my computer. Instead of the usual user login screen I had a black screen with this message:

"lsass.exe - Application Error". The application failed to initialize properly (0xc0000005). Click on ok to terminate the application

Once I click okay nothing happens, the screen just remains blank. I have tried going into safe mode (F8 key) but it doesn?t seem to work. I hold the button down but the computer just loads up like normal and goes onto the dreaded black screen.

I have done some quick research and found that the problem is either the OS is broken, or a virus is pretending the OS is broken. Either way I have no idea what to do.

Any help is much appreciated. Please note however I am pretty clueless when it comes to computers, thus please try to assume as little prior knowledge as is reasonably possible and include simple step by step instructions if you can. I apologise for my ignorance.

If you need any further information let me know. Note as I have no laptop currently I will have to wait until I am in work to respond.

Thanks in advance!

A:I cannot start my windows xp laptop, I have an error message that says: "lsass.exe - Application Error"

Hi gringo_jesus, and welcome to BleepingComputer.

Please post the make and model of this computer.

Read other 4 answers
RELEVANCY SCORE 27.2

So my laptop has a bunch of problems. It started out as a virus infection then I found out more problems.

First of all, thank you to Broni for directing me to the thread that tells me to run DSS.

I can't run a systems restore. I get the 0x800700B7 error. As well, Systems Restore says that I've never had a Systems Restore done before, which I think is odd, because I recall seeing Systems Restores created last time I checked (maybe a year ago?)

I also can't turn on Windows Firewall. I get the "Windows can't start the Mpssvc" message.

Here's my AVIRA log:

Avira Free Antivirus
Report file date: December-17-12 18:09
The program is running as an unrestricted full version.
Online services are available.

Licensee : Avira Free Antivirus
Serial number : 0000149996-ADJIE-0000001
Platform : Windows ™ Vista Home Premium
Windows version : (Service Pack 2) [6.0.6002]
Boot mode : Normally booted
Username : me
Computer name : ME

Version information:
BUILD.DAT : 13.0.0.2890 Bytes 05/12/2012 17:18:00
AVSCAN.EXE : 13.6.0.402 639264 Bytes 11/12/2012 14:42:33
AVSCANRC.DLL : 13.4.0.360 54560 Bytes 11/12/2012 14:42:33
LUKE.DLL : 13.6.0.400 67360 Bytes 11/12/2012 14:43:12
AVSCPLR.DLL : 13.6.0.402 93984 Bytes 10/12/2012 14:41:39
AVREG.DLL : 13.6.0.406 248096 Bytes 10/12/2012 14:41:32
avlode.dll : 13.6.1.402 428832 Bytes 10/12/2012 14:41:41
avlode.rdf ... Read more

A:System Restore Error, Windows Firewall Error and a bunch of viruses

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===Please download ComboFix from any of the links below, and save it to your desktop. For information regarding this download, please visit this web page: http://www.bleepingcomputer.com/combofix/how-to-use-combofixLink 1Link 2* IMPORTANT !!! Save ComboFix.exe to your DesktopIMPORTANT....1. Close any open browsers.2. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.3. Do not install any other programs until this if fixed.How to : Disable Anti-virus and Firewall...http://www.bleepingcomputer.com/forums/topic114351.htmlDouble click on ComboFix.exe & follow the prompts. When finished, it will produce a report for you. Please post the C:\ComboFix.txt Note:Do not mouse click ComboFix's window while it's running. That may cause it to stallNote: If you have difficulty properly disabling your protective programs, refer to this link --> http://www.bleepingcomputer.com/forums/topic114351.htmlNote: If after running ComboFix you get this error message "Illegal operation attempted on a registry key that has been marked for deletion." when attempting to run a program all you need to do is restart the computer to reset the registry.===Please download Farbar Service Scanner and run it on... Read more

Read other 65 answers
RELEVANCY SCORE 27.2

I have been having problems installing 8 updates since early May 2012. I am getting the error code in the title line.

The updates are:

[LIST][*]Security Update for Microsoft Office 2007 suites (KB2596672)[*]Security Update for Microsoft Office 2007 suites (KB2596792)[*]Security Update for Microsoft Office 2007 suites (KB2596880)[*]Security Update for Microsoft Office 2007 suites (KB2597162)[*]Security Update for Microsoft Office 2007 suites (KB2597969)[*]Security Update for Microsoft Office Excel 2007 (KB2597161)[*]Security Update for Microsoft Office Word 2007 (KB2596917)[*]Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687267)

I have run FixIt, but to no avail. I have also turned off services and rebooted and ran Windows Update and still got this error.

Do I need to just skip these updates, or somehow troubleshoot this and fix it. If I need to fix it, I need help.

Regards, and thanks.

Read other answers
RELEVANCY SCORE 27.2

Mod Edit: Moved from Win8 to the Am I Infected forum ~~boopmeI randomly decided to look at McAfee and check my settings, etc.  When looking at the main screen, everything states its on and green.  I had the most current definitions loaded.  When I checked my McAfee firewall it stated on.  When I clicked to go into the McAfee firewall, the screen then changed and said it was off.  When clicking the Turn On button, it would immediately shut off.  I searched this issue and the blogs stated to look at the Windows Firewall under Services.  When I checked, it was not there.  I did a Windows Search for it and found it.  When it opens it gives tells me I need to Update the Firewall Settings.  When I click on Use Recommended Settings it gives me an error "Windows Firewall can't change some of your settings.  Error Code 0x8007042c." I've checked out some of the blog discussions and followed a few thread about creating new register.bat files and running them.  I've also tried merging some .dll files also per the bloggers.  After doing these actions, the Windows Firewall now appears in my Services but when I click to start it I get the error "Windows could not start the Windows Firewall Service on Local Computer.  Error 1068:  The dependency service or group failed to start"

A:Can not start Windows Firewall - Error Code 0x8007042c and Error 1068

McAfee has verified I have a virus.  Will post in the Virus Forum.

Read other 15 answers
RELEVANCY SCORE 27.2

I was given an HP Compaq Presario C500 that was headed for the garbage because it would not connect to the internet. After running several scans ESET online scanner came up clean. Installed Microsoft Security Essentials and installed SP1, and can't get it to install SP2. I keep getting error code 80070017 / Windows Update encountered an unknown error.

I would prefer to reformat but Recovery Manager restarts back into Windows and I have no disks.

Can provide a long list of what has been done if needed including WU Modules (Normal Mode) and WU Components fixes. Permissions point in every which way but the correct way!

Any help would be much appreciated!

Free space is presently @ 42.3 GB of 68.9 GB on C: Drive (started out with 7.3 GB's free space! )
and 4.91 GB free of 5.53 GB on Presario_RP (D)

Specs as follows:
Vista Home Basic
Intel (R) Celeron (R) MCPU
[email protected] 1.60GHz 1.60 GHz
512 MB RAM
32-bit OS
Denied access to the CBS folder itself though can access CheckSUR.log which I am including along with sfcdetails.

=================================
Checking System Update Readiness.
Binary Version 6.0.6001.22375
Package Version 5.0
2010-10-04 19:57

Checking Deployment Packages

Checking Package Manifests and catalogs.

Checking package watchlist.

Checking component watchlist.

Checking packages.

Checking component store
Summary:
Seconds executed: 2478
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.224... Read more

A:Error code 80070017 / Windows Update encountered an unknown error

Checking Component Store
(f) CSI ReadFile Failed 0x00000017 winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990
(f) CSI Payload File Corrupt 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990



You have corrupted C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f699
folder thus this issue with updates ,I'm not fully sure it's only issue with wcp.dll or with full folder.For precaution I recommend replace all files in this folder.

How to fix:

1.First prepare special recovery disk Create a Recovery Disc
and make sure boot order in your BIOS is CD-ROM,C,A
(if you don't know how to to do that then check your computer manual)

2.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:

Click this bar to view the full image.
3.Boot burned special recovery disk (if you don't have Vista DVD instead use special recovery disk )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER

del C:\Windows\Logs\CBS\*.*

press ENTER

4.Back to your system and run Readiness Tool again.
5.Try install SP2 from Microsoft Dow... Read more

Read other 49 answers
RELEVANCY SCORE 27.2

Hello there!

I'm currently running Vista on my Compaq laptop. Unfortunately (long story) my key for Avast Antivirus expired in January 09 and I was unable to input the key code until September 09, so I guess the virus found it's way onto my computer during that time.
I ran a scan after finaly inputting the key and Avast found several infected items. Some could be removed, but since that scan I've been getting the following message after starting-up the laptop:-

Error loading C:/Windows/TEMP/msxm192z.dll

Also, since the initial scan and appearance of this error message I've been having various problems -
* Laptop running slow
* Media player not running (won't open/run) - cannot play any music!
* Photo Gallery icon blank and won't open - cannot access my photos!

I've since uninstalled Avast and installed a free version of AVG. Neither seem to be able to get rid of this virus.

I also followed the advice given to another member of this forum. I downloaded Malwarebytes Anti-Malware.
This is the MBAM report from the scan (which picked up several infected items):-

Malwarebytes' Anti-Malware 1.41
Database version: 3253
Windows 6.0.6002 Service Pack 2
28/11/2009 12:17:00
mbam-log-2009-11-28 (12-17-00).txt
Scan type: Quick Scan
Objects scanned: 98257
Time elapsed: 6 minute(s), 15 second(s)
Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 2
Registry Values Infected: 2
Registry Data Items Infected: 0
Folders In... Read more

Read other answers
RELEVANCY SCORE 27.2

Help I need assistance solving this problem.

When installing Windows 2000 setup copies the initial files to the hard drive and then restarts to begin the 1st stage of setup.

The system begins the startup process by "Loading the Windows Executive" At this point setup stalls and gives the following message:
"Setup cannot load ntkrnlmp.exe the error code is 16"
This error is duplicated in different releases in win2k from the beta 3 to the final releases.

Please assist, respond to [email protected] or ICQ 1937432
 

Read other answers
RELEVANCY SCORE 27.2

Symptoms: When you try to view any one of the following dialog boxes, the dialog box may appear to be empty or partly empty: Search Companion User Accounts Windows Update Help and Support System Restore When you try to start Microsoft Windows Media Player, you may receive an "An internal application error has occurred" (or a similar) error message.

Internet Explorer may not be able to print. When you click File, and then click Print, the Print dialog box does not appear. The print preview is blank.Cause:This issue may occur if one or more of the Jscript registry key settings are incorrect. This behavior may also occur if the Jscript.dll file is missing or damaged.Method 1: Reregister Jscript.dll and Vbscript.dll Click Start, and then click Run.

In the Open box, type regsvr32 jscript.dll, and then click OK.

Click OK.

Click Start, and then click Run.

In the Open box, type regsvr32 vbscript.dll, and then click OK.

Click OK.If either of the files do not register as expected, or if you receive an error message, the system file may be missing or damaged. To extract the missing file in Microsoft Windows XP, follow these steps: Click Start, and then click Run.

In the Open box, type msconfig, and then click OK.

Click Expand File.

In the File to restore box, type the name of the file that you want to restore.

In the Restore from box, type the path of the Windows XP .cab file where you want to restore the file, or
click Browse From ... Read more

A:How To Fix Windows Media Player Error - An Internal Application Error Has Occurred

i've tried both methods but nothing seems to work. i can't even uninstall the application or reinstall it.
please help if there is another method. thanks.

Read other 5 answers
RELEVANCY SCORE 27.2

So when i try to get Windows Firewall to run on recommended settings i get error 0x8007042c.
So far i have tried-
all four methods on the microsoft help page here:
?0x8007042c? error message when you try to start Windows Firewall
when i tried manually starting it i got error 1068 the dependency service or group failed to start

Ive also tried
Sharrow's "Most helpful Reply" on this page-
Windows could not start Error 1068: The dependency or group failed - Microsoft Community
although i dont have aland line so idk if what i did affected it well or not... person who wrote the thing had a wlan so idk if what i did was wrong.. anyone wanna let me know?

it didnt help either.

so i ran sfc /scannow on elevated command prompt and got it to my desktop (learned how to do that today )
here is what i got on it.... can anyone help me figure out what the issue is and how to solve it?
im only gonna post the stuff it cant repair, i dont think yall need the other stuff.

a third of the way through-
2014-01-06 10:56:16, Info CSI 000000e8 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-06 10:56:16, Info CSI 000000ea [SR] Cannot repair member fil... Read more

A:Windows Firewall error 0x8007042c + error 1068 (manually starting)

Welcome to the WSF, Junyahh!

Please use the following diagnostic tool. It has a powerful detection mechanism, and may help us get to the cause of your issues:

Please use the Farbar Recovery Scan Tool.
Download: Farbar Recovery Scan Tool Download
Select the version that applies to your system.
Save it to your Desktop.
Double-click the downloaded file to run it.

When the tool opens click Yes to the disclaimer.
At the program's console, press the Scan button.

When done, the tool produces a log, FRST.txt, in the same directory from which the tool is run (Desktop).
Please provide the FRST.txt in your reply.

The first time the tool is run, it also makes another log: Addition.txt
Also post the Addition.txt in your reply.


Also, use the Farbar Service Scanner
Download: Downloading Farbar Service Scanner

Let's get a view of all services and dependencies scoped by the tool...
Make sure the following options are checked:

Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender

Press: Scan

When done, FSS creates a log, FSS.txt, on the Desktop.

Please provide the FSS.txt in your reply.

Thank you.

Read other 1 answers