Over 1 million tech questions and answers.

Touchscreen no longer works and no longer in drivers

Q: Touchscreen no longer works and no longer in drivers

Touchscreen recently stopped working, went through troubleshooting, and HID-compliant touchsreen, is no longer in the drivers list for me to update, enable or disable. anyone know where i can download the driver or where i need to go for an update or somesuch.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Touchscreen no longer works and no longer in drivers

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 99.2

I bought a used x230T a while ago. Initially the touchscreen worked fine but the motherboard failed after about a month, so I replaced it. After doing so, however, the screen no longer takes touch input of any kind and the webcam no longer works. Any attempts to reinstall drivers have not worked, and I sometimes get an error stating that no touch input hardware could be detected. I've also tried unplugging and replugging the ZIF connectors many times. Does anyone have any advice for other steps I could take or others things I could try? I got the tablet model specifically because of the touchscreen so it's been disappointing to go without it. Thanks for any tips you may have.

Read other answers
RELEVANCY SCORE 99.2

I've been using my u920t for almost 10 mont and i really like that i can still use the touchscreen when the keyboard ist out.

But a couple of days ago it stopped working. I don't remeber changing anything.

Windows now tells me the screen is not a touchscreen.
Once i put the screen down and go into tablet mode everything works fine.
Tablet PC setting in the control panel also disappear once the keyboard ist out..

I tried reinstalling the driver.
I also did a windows 8 refresh (no backup unfortunately)

Any ideas?


Thank you for your help.

A:Satellite U920T - when I slide out the keyboard touchscreen no longer works

> Tablet PC setting in the control panel also disappear once the keyboard ist out..
I assume this should be OK since the tablet PC settings should be available only if the notebook is used in ?tablet mode?

The point is that this notebook can be used in three different modes.
1) tablet mode -> the keyboard and touchpad are pulled in and only touchscreen can be used
2) laptop mode -> the keyboard and touchpad are pulled out
3) photography mode -> keyboard is pulled in but touchpad is pulled out and can be used as well as the touchscreen.


I?m not quite sure if the ?orientation lock button? (on the left side) would affect the touchscreen but fact is that using this button the automatic rotation of the screen orientation can be enabled or disabled.
If you are operating the computer in laptop or in photography mode, the screen orientation will always be in Landscape mode.

Please check also if the touch display has been calibrated properly
Go to control panel (win key + x control panel) -> Tablet PC settings

Here you will find the first tab called ?Display?
Click on ?Setup? button to start the setup where you could identify the touchscreen
In bottom area called ?display options? you could calibrate the touch display.

Read other 6 answers
RELEVANCY SCORE 99.2

Since recovery of laptop my laptop touch does not work, it also does not appear in device manager and I am stuck.
 

A:Touchscreen No longer Works P50t-b113 Toshiba Satelite

What kind of "Recovery" did you do on the system?
Why did you do a "Recovery"?
 

Read other 2 answers
RELEVANCY SCORE 99.2

Got one of these

https://www.mytoshiba.com.au/products/computers/tablet/m930/pdw04a-00c001/specifications

No longer able to use finger input on touchscreen.
Pen works on touchscreen OK.

It is as if I have accidently disbled it somehow.

Can't find any reference to a key or switch to enable/disable finger input on touchscreen in pdf manual or google.

Does anyone know how to re enable the finger input for the touch screen on a toshiba portege tablet M930?

A:Portege M930 - finger input to touchscreen no longer works

Hi


The fingertouch might be disabled.
Go to control panel ? Pen & touch

in the Pen and Touch Settings window, click the Touch tab
Check or uncheck the checkbox next to Use your finger as an input device
Click Apply and then OK

Read other 1 answers
RELEVANCY SCORE 95.2

Long list of items that have crept up on this laptop after using it for several months. . . . The touchscreen no longer works.   I have reinstalled drivers over and over again, deleted and let windows choose the driver, and have tried everything I can think of to get it working. Yet it no longer recognizes touch at all. Bamboo Ink styles works just fine, uninstalling the associated drivers did not change anything. It slowly started to work intermittently and then just quit all together. Keyboard keys just stop working  So far some seemingly random LOWERCASE letters stop working, if I hold shift I get an uppercase just fine, or if I hit capslock it will give me the uppercase of whatever letter is not working for that day, so the button itself is fine. This has happened on several different keys completely randomly for no apparent reason what so ever. The only way to fix the issue once it occurs is to stop what you are doing and restart the computer. . . Doing so might fix it for a week or an hour. In the middle of typing or clicking, or doing anything at all it decides to "sleep"    I can be in the middle of typing something, moving the mouse to click on something, or using the stylus to take notes and without warning it will enter sleep/hibernation mode. . .  I have updated the drivers to the latest that are available, I also updated the BIOS to the latest recommended to see if that might help solve some of the issues. So far no lu... Read more

Read other answers
RELEVANCY SCORE 90

Ever since last night the audio on my computer doesnt work at all. I installed the drivers to my labtec webcam and ever since i cant get any sound at all. The sound drivers my computer uses are Realtek Digital High Definition Audio and i tried to reinstall them but windows gave me an error message saying the drivers weren't by a recognized publisher and it wouldnt let me continue. I cant do a system restore because there's no restore points set on my computer apparently

I'm not very good at explaining so sorry if this is a bit vague but any help would be appreciated.

A:Audio no longer works after installing webcam drivers

Go to control panel and then to sound. Scroll trough the tabs.
Make sure the "Sound play back" is set to Realtek.

Hope it helps :)

Read other 1 answers
RELEVANCY SCORE 78.8

My computer's touch screen isn't working and it's like it no longer recognises it has a touch screen. It stopped working after I switched out of tablet mode. These are the things I have tried: * Restarting* resetting to a previous point* windows update* uninstalling the HID-Compliant Touch Screen driver and restarting to re-install it - the problem was that this driver was 'hidden' and was saying error 45 - the hardware is not connected to the computer. It didn't reinstall properly* A hard reset, reinstalling windows 10 - now the HID-Compliant Touch Screen driver isn't there at all, not even hidden* A UEFI diagnostics test - there was no option to click on 'touch screen' as a component, as the the computer doesn't think it has a touch screen When I search for calibrate touch screen, or tablet PC mode, neither of these options are there anymore (they were just a couple of days ago). I'm not sure what has happened but I don't seem to have any of the right drivers or software for the touchscreen and the computer just doesn't seem to recognise it has a touch screen. When I flip the screen around now the keys also don't lock, as though it doesn't recognise it's in tablet mode.

Read other answers
RELEVANCY SCORE 78.8

The computer recognizes that the screen is touch capable when I try to calibrate, but theres no response to my touch. It worked fine yesterday, but the day before that I lost the touch capabilty aswell. Nothing has really happened to my Laptop to make it change so suddenly. Any ideas?

A:Ideapad S415 touchscreen no longer working

To resolve the touchscreen issue follow below steps.1. Open Device Manager and uninstall all that start with HID- under Human interface devices.2. Restart the system and see if that works. Also perform a Power Drain. If the battery is removable, remove AC and Battery and hold the power button down for 15 sec. Turn the computer back on and check now if touchscreen is working fine. 

Read other 2 answers
RELEVANCY SCORE 78.8

Hi,

My partner purchased a Satellite S50t-B probably 5-6 months ago, and everything was working perfectly, up until she had some windows updates that happened, and now the HID touch compliant drivers are seemingly disabled in device manager?

The touchscreen is no longer working, and i've just about exhausted all options i could think of.

I've tried reinstalling windows, applying any and all updates through service center, i cannot find any drivers for the touch screen on the support website downloads section, and the bios etc is all up to date.

I was hoping someone could shed some light on how to proceed with this issue, given the main reason she purchased it was the touch screen feature.

Thanks, Keegan

Message was edited by: keegz

A:Satellite S50t-B touchscreen no longer working

I have no idea what system you have installed, but if the notebook was equipped with the touchscreen, additional drivers for touchscreen are not necessary.
If touchscreen would work properly, the Windows (Win 8.1) should detect it automatically.

What Satellite S50t-B-ooo do you have excatly?
From my point of few the notebook should be set to factory settings just to check if its really an software related issue... so I'm wondering why you don't use the HDD recovery or recovery medium to set the notebook back to factory settings?

Read other 2 answers
RELEVANCY SCORE 74.4

My sister's computer was infected with the SystemSecurity Malware. I followed the instructions on this page:http://www.bleepingcomputer.com/malware-re...system-securityto remove it. However, now her Internet Explorer no longer works. When she clicks on the link to open IE, it says "C:\Program Files\Internet Explorer\iexplorer.exe Is Not Found." I've had here uninstall and reinstall IE, but that didn't solve the problem. Hopefully someone here can help. Here is the log from after running Malwarebytes Anti-Malware software referenced in the above article.Malwarebytes' Anti-Malware 1.32Database version: 1631Windows 5.1.2600 Service Pack 31/8/2009 8:58:12 AMmbam-log-2009-01-08 (08-58-12).txtScan type: Quick ScanObjects scanned: 58590Time elapsed: 4 minute(s), 29 second(s)Memory Processes Infected: 0Memory Modules Infected: 0Registry Keys Infected: 23Registry Values Infected: 6Registry Data Items Infected: 0Folders Infected: 1Files Infected: 10Memory Processes Infected:(No malicious items detected)Memory Modules Infected:(No malicious items detected)Registry Keys Infected:HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Browser Helper Objects\{9bff62cc-31b6-340d-94ad-b370cbbfd352} (Trojan.Vundo.H) -> Quarantined and deleted successfully.HKEY_CLASSES_ROOT\CLSID\{9bff62cc-31b6-340d-94ad-b370cbbfd352} (Trojan.Vundo.H) -> Quarantined and deleted successfully.HKEY_CLASSES_ROOT\cp... Read more

A:IE No Longer Works

I also had her run combofix to see if that would fix the IE problem. Unfortunately, it did not. Here is the log after running that....ComboFix 09-01-07.02 - Administrator 2009-01-07 22:14:42.1 - NTFSx86 NETWORKMicrosoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.766.591 [GMT -6:00]Running from: c:\mycombofix\ComboFix.exeCommand switches used :: c:\mycombofix\WindowsXP-KB310994-SP2-Pro-BootDisk-ENU.exe.((((((((((((((((((((((((((((((((((((((( Other Deletions ))))))))))))))))))))))))))))))))))))))))))))))))).c:\windows\Downloaded Program Files\setup.infc:\windows\IE4 Error Log.txtc:\windows\system32\msiconf.exe.((((((((((((((((((((((((( Files Created from 2008-12-08 to 2009-01-08 ))))))))))))))))))))))))))))))).2009-01-07 22:11 . 2009-01-07 22:13 <DIR> d-------- C:\MyComboFix2009-01-07 22:01 . 2009-01-07 22:01 <DIR> d-------- c:\documents and settings\Administrator\Application Data\Talkback2009-01-07 12:12 . 2009-01-07 20:33 <DIR> d-------- c:\program files\a-squared Free2009-01-07 11:10 . 2009-01-07 11:11 <DIR> d-------- c:\documents and settings\All Users\Application Data\1519175312009-01-07 11:06 . 2009-01-07 11:06 <DIR> d-------- c:\documents and settings\Pamela\Application Data\s_5849_OTl8fHx8OTl8fHwxMjQzOTc3Njk1fA_2009-01-07 11:05 . 2009-01-07 11:05 <DIR> d-------- c:\windows\SY... Read more

Read other 9 answers
RELEVANCY SCORE 74.4

Hi,

I had recently moved my server from one location to another. Only changes were the ISP. Static IP address has changed also. Outlook Web Access was working fine before the move. Don't know what could have caused that to happen. Any information on how I can get OWA working again would be greatly appreciated.

-Dan
 

Read other answers
RELEVANCY SCORE 74.4

Today water spilt on top of my case and I believe it got inside of the case. After cleaning up the mess, I tried to start my computer. It started fine so I had a sigh of relief. When I tried to connect to a web page, it would not load. It would say network took too long to respond. I can still connect to my router page. The network icon in my tray (the 2 computers) look fine. I then tried to move the computer to my router and connect it with a different cable, same issue. I tried to directly connect the modem to the computer and it said limited or no connectivity.

I thought the on-board LAN got fried from the water, so I went out and bought a lan card for a PCI slot. I have the same issues with this.

Any idea what is causing this? Is this a motherboard short? Do I need a new motherboard entirely?

I'm just really confused as to how it still starts up if it is a short and why I can still access the router page. I hope someone can help me, thanks a lot!
 

A:LAN no longer works

Read other 7 answers
RELEVANCY SCORE 74.4

System W8, I.E. 10. Thursday 14 July suddenly found I could not get any web page, the Google ?circle? just keeps spinning. The only thing I can do is close the page, sometimes cannot do that and have to power off.
Tried using Mozilla and it seems to work OK. Having done searches it seems all support for I.E. 8, 9 and 10 was terminated at the beginning of the year. Is this the cause of my problem? I was put off using Mozilla when I found when you downloaded just 1 file and scanned with NIS, it showed total items scanned as 2 files! Wondered what the extra file is? Same file downloaded with I.E. 10 showed 1 file.
Should I upgrade to W8.1 and I.E.11? Are there any major disadvantages in doing this? Do you lose all your software and downloaded data on the hard drive during the process? Got data backed up to 2 external hard drives; I just wondered.
Thanks for any help you may offer.

Read other answers
RELEVANCY SCORE 74.4

ni idea why..........it just stopped working a couple of days ago,i get the "cant find server" page......its as if the web has closed for lunch.opera works fine.......kazaalite works normally...programs like "bigfix" and my A/V updater come back with "a connection to the internet is needed"......which of course there is, they just dont see it.
ive run sfc /scannnow and ive re-installed the IE.inf file......still nothing.
any thoughts??

cheers in advance
 

A:IE 6 no longer works

Read other 12 answers
RELEVANCY SCORE 74.4

:help: i got my laptop 5 mos. ago and wen i installed ts3 and wa expansion it worked perfectly. when i digitally downloaded amb expansion pack i had no visible cursor in the game. i restored my computer and reinstalled ts3 base game, directx, java, and updated my patches. my computer is up to date(i think), and i defragged and everything. i have no custom content or mods, and no store stuff either. just pure game. now it was crashing after the first few seconds and cutting my computer totally off, like i hit the power button or something. now it crashes to my desktop, ive read thru forums and postings on three different sights and cant figure out what to do, ive tried everything!1 i need help please, if anyone can help i would appreciate it, thanx in advance!!
this is my dxdiab
------------------
System Information
------------------
Time of this report: 7/8/2010, 22:01:02
Machine name: PARADISE-PC
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_gdr.100226-1909)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: Presario CQ61 Notebook PC
BIOS: Default System BIOS
Processor: AMD Athlon(tm) II Dual-Core M300 (2 CPUs), ~2.0GHz
Memory: 3072MB RAM
Available OS Memory: 2812MB RAM
Page File: 1544MB used, 4077MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 120 DPI (125 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled... Read more

A:ts3 no longer works!! plz help!!

Read other 7 answers
RELEVANCY SCORE 74.4

For a couple years now I've connected my dell notebook computer with windows vista to my samsung tv display. Then the other night, all of a sudden while watching a movie, it lost connection and I haven't been able to get it back up since.

My computer actually detects the TV. I know this because I go into NVIDIA command center to select the different options. I still get nothing displayed on the TV when I select mirror or extend.

I've tried everything within display settings. I've also updated my NVIDIA driver. I've looked into the device manager and system restore (can't restore because all restore points are after the date this problem occurred). Still doesn't work. I know its not the TV or the VGA cable because a different dell laptop works fine with it. Its just plug and play (like mine use to be).

I'm not sure what else to try except a complete windows re-install (definitely hoping to avoid that!) Help. Thanks!
 

A:vga out to tv no longer works

I don't have any ideas at the moment except to say that I doubt this is a problem that would be solved by a reinstallation, so that may be a painful waste of time. Better do some more investigating first.

Did it just drop off immediately, or were there any "symptoms" at all?

Thoroughly check out the TV end, too, and make sure some "input" setting didn't get changed by a random press of a remote button.
 

Read other 2 answers
RELEVANCY SCORE 74.4

As much as I don't like using it I still need it for updates, but for about the last week or so it won't open. When I click the windows update link in the programs the cursor flashes the hourglass for a second or two then nothing. When I try to load IE from the program list it opens a window and says connecting but nothing happens. After a minute or two I get this
I have uninstalled and reinstalled IE7 about 4 times and nothing works. Can anyone help? TIA!
 

A:IE no longer works

Try this please
tools internet options/advanced and hit thr reset button
this will knock all add ons off

restart IE and see if it helps please
 

Read other 3 answers
RELEVANCY SCORE 74.4

My IE browser no longer works. I have read many threads regarding this matter. I have taken the necessary steps.
I have downloaded and used ad aware. (found 236 spy ware and ad ware CRAP!)
I have also downloaded and used Spybot. (found over 400!!)
IE still does not work. I am currently using MSN and I hate it. I can ping any site I try and I am still using my Outlook Express for my e-mail.
Here is a log from HiJack this.
Please help.
Logfile of HijackThis v1.97.7
Scan saved at 9:39:22 AM, on 6/27/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb04.exe
C:\Program Files\Office keyboard utility\1.2\OFFICEKB.exe
C:\PROGRA~1\DATACA~1\FLashKsk.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\PROGRA~1\AWS\WEATHE~1\Weather.exe
C:\Program Files\MSN Messenger\MsnMsgr.Exe
C:\Program Files\Office keyboard utility\1.2\MMKEYB.EXE
C:\Program Files\Office keyboard utility\1.2\TrayMon.exe
C:\Program Files\Office keyboard utility\1.2\osd.exe
C:\Program Files\Office keyboard util... Read more

A:IE no longer works

start a new thread over on the security forum and post your log there....its the best place for assistance with hijack problems
 

Read other 1 answers
RELEVANCY SCORE 74.4

I bought an HP Pavilion 2 years ago. AMD A-10 proc with 8gig mem. Worked fine for 6 months. HDMI quit working. Started using VGA. Bought Seagate USB 3.0 2 TByte for backup. Worked fine. 18 months later MSI MS-7778 motherboard started giving me trouble on start up. I'd push the power button and the computer would lock up before getting to the point where I could enter 'setup'. I'd restart a few times and it would work okay from there. The problem kept getting worse over time until I would have to try to restart 50 to 100 times. It finally got to the point where it wouldn't boot up at all, no matter how many times I tried. I bought a new ASUS mother board and that problem was solved. But, the USB 3.0 ports would not work. Took the board back and bought the upgraded ASUS A88XM-A mother board. Still, I can't get the rear panel USB 3.0 ports to work as USB 3.0. They only work as 2.0. The front panel USB 3.0 ports don't work at all. I have downloaded the latest drivers from ASUS and re-installed them several times. I've also tried an USB 3.0 thumb drive in all ports. It isn't recognized by any of the ports. As a side note, the front panel card reader no longer works either.

Any help would be appreciated.

Thanks

Rick

A:USB 3.0 no longer works

Hello and welcome RT mate run these first

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option2 if necessary

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer – delete any rubbishthese find.

Then if no go run this sounds a bit drastic but it will scan everything from power up and doesn't involve Windows Download Kaspersky Rescue Disk 10

Read other 7 answers
RELEVANCY SCORE 74.4

Normally when I adjust sound in Vista a graph appears on screen.
This is no longer happening.
Sound System is Realtek, the original programme that came with the laptop.
 

A:Solved: Realtek On Screen Graph No Longer No Longer Working.

Solved!
A box for Wistron had been accidentally unchecked in startup menu.
 

Read other 1 answers
RELEVANCY SCORE 74.4

So my laptop is about a year old and aside from having to switch out a bad graphics card about a month ago, it's never had any real problems. This morning, though, I noticed my laptop didn't seem to be booting correctly. It would display the HP logo as always, then show a blinking cursor which just sat there. Normally, my laptop boots in a little under a minute, and that cursor is only onscreen for about 3 seconds. Now, the cursor remains for 2 minutes or so, after which the computer continues booting. Overall boot time is now 3 minutes or more. This last time I restarted it, the screen was totally blank for three minutes, after which the vista logo suddenly popped up followed by my desktop.

The other odd thing is that windows can no longer recognize my DVD/CD drive. It seems the same as always physically, at least as far as I can tell, but windows does not seem to know it's there; it's gone from both My Computer and device manager, and nothing happens when I insert a disc (even though it's set to autoplay.) The drive light still lights up and it still pops out like normal, however. I played a DVD on it just last night with no problems. Earlier that day I had burned a DVD, but that's something I do often and it's never posed any issues; the program I use is ConvertXtoDVD 3. It can't detect the drive either now.

I would assume these problems are connected somehow, since they both started at the same time; but I can't figure out how they're connected. I'm wondering if one cau... Read more

Read other answers
RELEVANCY SCORE 73.6

i used to use kazaa and i think that i opened a number of corrupted files that infected my computer with viruses. the viruses caused my burner to stop wroking. it would say that it was burnung but it would tell me that it was burning and never stop. i would have to shut down the program and when i check the cd afterwards it would still be blank. i tried to use the system and application recovery disks but the system recovery said that there was a rpoblem during the recovery. the application recovery of the cd writing program would go on forever and then time out and be stopped. i ran a virus scan and found hundreds of viruses on my computer. i found a program to remove all of the viruses so now they are gone. however whenever i try to burn now it says that certain files and programs needed to burn are missing. i cannot find them and i am still hvaing the same problems reinstalling them. i do not know what to do next . any ideas respond or email me at [email protected]
 

A:cd burner no longer works

Read other 16 answers
RELEVANCY SCORE 73.6

I used to put my computer to sleep every night by putting it on stand by. Now, once I press it nothing happens! Any suggestions?

A:Stand By no longer works!

You could try reinstalling your video driver.

Read other 8 answers
RELEVANCY SCORE 73.6

Hi. For the past two months I have been running a wireless network via a Linksys router in my house. I'm using a Dell Inspiron 7200.

For the most part all has been fine. However, from time to time, even as I surfed the web I would find my connection was no longer working. Most of the time I'd just wait a minute or two and it'd restore itself. Sometimes I'd have to manually disconnect from the network and re-connect. It wasn't much more than an annoyance that happened about once a day.

As time went by, however, the disconnections would occur more frequently. Last week it got to the point where I was being booted offline multiple times per session. The router was never unplugged. Resetting it didn't correct the problem either.

I would begin having to restart my computer to reconnect to my network, but that began to fail as well. I finally deduced the problem lay with the network card. I tried to run the Windows "Repair" option, but all it did was freeze it up once disabling the card. Now I cannot connect to my network at all. I tried installing a new driver, but 40 minutes later it was still "installing". The icon at the taskbar often shows Windows "searching for network address" for minutes on end. Short of buying a new network card, any repair ideas?
 

A:Network no longer works

sounds like your card got deepfried or something..

personally, i would see no repair option except for soldering on the card, but that's not something to do yourself if you don't know what to do..

my advice: get a new card.. they cost next to nothing nowadays.
 

Read other 3 answers
RELEVANCY SCORE 73.6

I installed virtualbox, and it installed some form of usb drivers to be able to detect USB mice in the virtual machine, and I ended up uninstalling because my USB mouse no longer worked.

I restored back to a previous time, and my mouse still doesnt work. Any ideas?

heres a link to my device manager...is it normal to have that many things under universal serial bus controllers?

http://i56.tinypic.com/2j4daht.png

A:USB Mouse no longer works

Yes it is normal to have that many things under USB. Right click the Alps Pointing device and the HID compliant mouse and Uninstall them. Unplug the USB mouse and restart the computer. After Windows loads plug in the USB mouse. A new hardware wizard should recognize it and install the proper driver for it.

Read other 2 answers
RELEVANCY SCORE 73.6

Gmail on Live Mazil suddenly no longer works
On my laptop Sony / Windows 7 / Live Mail, I have 2 email addresses: 1. [email protected] and
[email protected] . 
 
Until a few days ago both worked perfectly, sending and receiving mail. 
Then I must have done SOMETHING (don't ask me what), and now:
Wanadoo/Orange address continues to work perfectly receiving and sending mails,but the Gmail address doesn't work- I keep on getting error messages. The fact that the laptop is French, doesn't help!
Can anyone help, please?
The settings can be viewed at ..........
 (Link deleted as it shows email addresses. Queen-Evie)

A:Gmail no longer works

What are the error messages Gmail is giving you? If it includes your email name, xxx it out as I did in your post above.

Read other 5 answers
RELEVANCY SCORE 73.6

hallo,

hp pavilion laptop ---- win7 ---- kaspersky security

i downloaded switchsetup.exe from nch, a sound file converter. kaspersky asks - do you want to allow this program to make changes to your computer? i said yes, believing switchsetup.exe to be legit. (i think i got it as a recommend from this forum some time ago)

ever since then, the mouse's right-click function has stopped working. its a real drag, i can no longer check the size of a folder or rename a file by right-clicking on it. i have to open the folder, highlight all its files then ---> File on the Menu line ---> Properties or highlight the file, File---> properties--->Rename. really irritating.

has anyone experienced this?

am thinking i will backup all my data then roll back (once i figure out how to do that) to a date preceding the switchsetup.exe download.

would this be a reasonable way to go? or is there an easier way to regain right-click functionality?

thanks

karaman
 

A:right-click no longer works

check your mouse settings for the button configuration and make sure its set correctly.
 

Read other 3 answers
RELEVANCY SCORE 73.6

Rather than letting PC run and/or turning it off completely (while I read the paper or eat lunch) I have always put it in "Stand By" (Start, Turn Off Computer, Stand By) Lately this option no longer works. Could someone help me solve this problem?

A:"Stand By" No Longer Works

Do you get any error messages when you try Stand By?

Read other 9 answers
RELEVANCY SCORE 73.6

Hey there. My HP Coolsense has completely dissapeared from my computer and I have no idea why. At the moment this is really bad for me since it's Summer and it overheats 5+ times a day, whereas when I had coolsense last year, it never overheated. I was just wondering if there was a way to reinstall it? I've looked at other forums and they all say to use some kind of HP program and I have triend looking for this, but I haven't been able to find it. Please help D:













Solved!

View Solution.

A:HP Coolsense no longer works

Hi, Try the following. Open windows Control Panel and in the top right, next to View by: select 'Large Icons'.  From the new layout, select Programs and Features. Click on Turn Windows features on or off in the left hand pane. When this window has loaded, enter a checkmark against .NET Framework 3.5 (includes .NET 2.0 and 3.0) then click Ok and follow through the procedure to install this. When this has completed, restart the notebook. When windows has fully reloaded, download the installer for HP CoolSense on the link below and save it to your Downloads folder. http://ftp.hp.com/pub/softpaq/sp67501-68000/sp67743.exe When the download has completed, open your Downloads folder, right click the CoolSense installer and select 'Run as Administrator' to start the installation. If this completes Ok, restart the notebook. Regards, DP-K

Read other 4 answers
RELEVANCY SCORE 73.6

my computers been crappin out lately and i thought i had cleaned all the crap off of it. but i think i deleted something i needed. cause now, no audio works! i know my speakers are plugged in and they work. it's just that the actual computer isn't sending out an audio signal!

what can i do to get my audio back?!?!?!?!?!?!
 

A:audio no longer works!

Read other 10 answers
RELEVANCY SCORE 73.6

my children have been playing games on this system (windows me).now any cd-rom you put in the drive will not play.If you click on my computer and show the disk drives ,the computer is not recognizing the cd-rom.Have the children done something to make this drive quit working or is something else wrong??
 

A:d:drive no longer works??

does the disk drive have power or spin up?

if not then it prob died.
 

Read other 1 answers
RELEVANCY SCORE 73.6

Gmail on Live Mazil suddenly no longer works
On my laptop Sony / Windows 7 / Live Mail, I have 2 email addresses: 1. [email protected] and 2. [email protected] .
Until a few days ago both worked perfectly, sending and receiving mail.
Then I must have done SOMETHING (don't ask me what), and now:

Wanadoo/Orange address continues to work perfectly receiving and sending mails,but the Gmail address doesn't work- I keep on getting error messages. The fact that the laptop is French, doesn't help!
Can anyone help, please?

The settings of both addresses can be seen below ..............

Also on :
https://www.bobscardmodels.altervista.org/page7.htm

A:Gmail no longer works!

i have removed the email
Thats the quickest way to get spam

if you log into the gmail web service
you can get the details of exactly how to setup windows live mail and all the settings

I would suggest that first - and check each setting

do you get any error messages ?

Read other 6 answers
RELEVANCY SCORE 73.6

I changed the computer which is running Windows 2000 server from a domain to a work group and then rebooted. When it came back up The password to get into windows was no longer recognized.
Can I reinstall windows 2000 without losing files and still get back into windows?
I have already done the F8 thing, It seems to be booting fine. It's just when you get to the login screen it won't accept the password.
 

A:Password no longer works

Read other 9 answers
RELEVANCY SCORE 73.6

It seems my Flash no longer works. When I go to a site that uses Flash, there is a blank screen where the Flash player is located. I am using IE8 (32 bit).
When I go to download Flash from the Adobe site, I get an error that there was a GUI error. Any ideas what is happening? BTW, I assumed there was a virus or something similar, so did a scan using MS Security Essentials and it did find an unrelated threat that I removed.

A:Flash no longer works

Forgot to add that I am using Win 7 - 64 bit with the 32 bit Internet Explorer.
The exact error message is: Unable to load a GUI

Read other 6 answers
RELEVANCY SCORE 73.6

Hello! I'm having an issue with my webcam. Not long ago it used to work very nice. I even used to to broadcast with it. but all of a sudden it stop working. It doesn't get recognized.When I open cyberlink youcam I get an error that no webcam is recognized and I need to connect my webcam.and only the logo will show. If I open manycam the camera won't start either and a black image will show. I see that in device manager the Imaging devices won't show. The HP TRUEVISION won't show either. It does not appear.I've tried everything.Unistalling all the videosoftwares I've installed like manycam, skype etc.I even unistall cyberlynk youcam ad reinstalled it with HP Recovery Manager. It worked at first and i was able to use my cam with skype  but the next day the same error showed and won't let me use my cam. I've tried system re-stores point. didn't help.I've tried all the manuals, nothing solves the issue.I only need it to use skype. I'll attached an image where you can see that no capture device will show.  I don't know if I need to install a driver or something but please don't give me the youcam tutorial steps already done all of them and none of them worked. thank you for your help and I'm desperate.

Read other answers
RELEVANCY SCORE 73.6

If I open it, it just closes right away. With no error messages.

So far I have tried uninstalling and reinstalling with"turn windows features on/off" but that didn't fix.
This in on windows 8 pro rtm x64

A:IE10 no longer works.

Hello Chromatica,

You might see if completely resetting Internet Explorer may be able to help.

Internet Explorer - Reset - Windows 7 Forums

Hope this helps,
Shawn

Read other 5 answers
RELEVANCY SCORE 73.6

My computer no longer goes into Standby mode when I select Start - Turn Off Computer - Standby, where the Power Supply powers down. This happened seeral months ago when I was getting a glitch at startup that eventually was traced to a defective power supply. I put in an undersized loaner (350W) until I could buy and install a new PS. I assumed the inability to go to Standby was a power supply issue. Today I installed a new Hiper 530W PS and still cannot get it to go to standby mode. I have checked the Power Options in Control Panel and under Power Schemes - System Standby, Never is the option selected. I am going to try to select "After 5 Hours" and see if that affects the Standby mode.

Any suggestions would be appreciated

I have an ASUS A8V Deluxe MB running Windows XP Home, 2 GB RAM, AMD 64, Socket 939 3300+ CPU with two internal IDE hard drives and one external USB Drive.

Thanks, domer
 

A:Standby no longer works

Some process is running that is preventing stand by (you knew that:blackeye: )

- go into the task manager and end all non Microsoft processes,then try stand by.

- disconnect from WAN then LAN

- roll back any hardware or software changes,or Windows updates or BIOS setttings.

- disable screensaver.
 

Read other 3 answers
RELEVANCY SCORE 73.6

Hi my flash was working fine, now i can't view videos on you tube or anything to do with flash. It says that i have java disabled or an old flash player. I go to the adobe flash player web site and it says that i have the most recent player, and when i look in internet options everything i can see that has anything to do with java it says it is enabled. I havnt changed any settings to do with java. Someone with some brains please help!

A:Javascript no longer works in ie7

Check Internet Options, Advanced tab, ensure JAVA Sun is enabled.

Open Control Panel, double-click JAVA icon to open the JAVA Console. Check all tabs but pay special attention to [About]. Suggest you set updates to auto, notify ONLY.

The latest version I have is 1.6.0_12_b04

JAVA Download

Read other 1 answers
RELEVANCY SCORE 73.6

Hi.
A couple of days ago my headset was working fine.
I unplugged my printer and my speakers started buzzing. I plugged in some other things, but nothing to do with the computer, which is why I unplugged the printer.
I put the headset mic jack in and tried to record but the only thing is recorded was the loud buzzing of the speakers.
The headphones work fine. The speakers now are fine. No settings were changed. However, the mic now doesn't work - no sound is recorded. The mic doesn't seem to be on (there is no way of turning it off on the headset itself), but the computer recognises when the jack has been plugged in.
The mic is enabled under recording devices.
I don't know what's gone wrong. How can I get my mic working again?
Thanks.

A:Headset mic no longer works

I put the headset mic jack in and tried to record but the only thing is recorded was the loud buzzing of the speakers.
The mic is enabled under recording devices.

The only thing I could think of by this, since the mic is enabled by recording devices, right-click the external mic - Properties - Listen tab - under Playback through devices, choose default playback. Apply -  Ok.

Read other 8 answers
RELEVANCY SCORE 73.6

The sound no longer works on my DELL DIMENSION, WIN ME setup. The speakers work on my other computer, all connections are ok. I recently cleaned out some files and probably removed the wrong one. Sys restore stopped working a month ago so that is not available. Any suggestions?

Wesleyd
 

A:sound no longer works

wesleyd said:

The sound no longer works on my DELL DIMENSION, WIN ME setup. The speakers work on my other computer, all connections are ok. I recently cleaned out some files and probably removed the wrong one. Sys restore stopped working a month ago so that is not available. Any suggestions?

WesleydClick to expand...
 

Read other 3 answers
RELEVANCY SCORE 73.6

I accidentally installed realalternative, thinking I was getting an rm to avi converter. When I discovered it changed ALL my file associations I uninstalled it, but then found out that realplayer itself no longer worked. The clicked files just would not open at all. I tried to uninstall realplayer to reinstall it, thru controlpaneladd-remove progs, but got an error msg that an uninstall dll was missing. I reinstalled anyway, the free realplayer, and it seemed to go all right, the player even opened up at the end of the install. A bit later when I tried opening some .rm vids, they still wouldn't open. I reinstalled one more time, this time even getting the msg "prog already exists-installover existing file?" So I did, it went all right, but my real files won't open. I am stumped. Any advice? I COULD use the realalternative to view these files I suppose, but I really want the old realplayer (I need it to convert .rm to .avi with another prog I just got.) Thanks in advance.
 

A:Realplayer no longer works

slickoe said:

I accidentally installed realalternative, thinking I was getting an rm to avi converter. When I discovered it changed ALL my file associations I uninstalled it, but then found out that realplayer itself no longer worked. The clicked files just would not open at all. I tried to uninstall realplayer to reinstall it, thru controlpaneladd-remove progs, but got an error msg that an uninstall dll was missing. I reinstalled anyway, the free realplayer, and it seemed to go all right, the player even opened up at the end of the install. A bit later when I tried opening some .rm vids, they still wouldn't open. I reinstalled one more time, this time even getting the msg "prog already exists-installover existing file?" So I did, it went all right, but my real files won't open. I am stumped. Any advice? I COULD use the realalternative to view these files I suppose, but I really want the old realplayer (I need it to convert .rm to .avi with another prog I just got.) Thanks in advance.Click to expand...
 

Read other 1 answers
RELEVANCY SCORE 73.6

CD/DVD device worked perfectly but now is not recognizedd and doesn't function. Device Manager says driver is installed but corrupted. How to fix or get replacement driver? Device is: hp CDDVDW SH216BB SCSI. HP website says no such driver is available for download from them.

Read other answers
RELEVANCY SCORE 73.6

Well, a couple of days ago I found many trojans, spyware items on my pc, so I downloaded Spyware Doctor and a few other spyware programs, after a while I got "what I believe to be all the trojans etc off my pc" I later noticed that my sound did not work and sound symbol did not appear in the lower corner of my screen, I have looked up any and everything I could find on this and nothing seems to work, when I go to my Device manager nothing shows up at all just a blank white screen. I have tried downloading the drivers from the official website and that does not work either, also when I click on add hardware icon nothing happens at all there either. Im lost and dont know what to do

I have Realtek AC97

my pc is a Gateway
dual core 64 bit proc

dont know a ton about pc's but enough to understand a little above average
 

A:My Sound no longer works

Have a look at:

Viruses/Spyware/Malware Preliminary Removal Instructions
 

Read other 1 answers
RELEVANCY SCORE 73.6

After the last update from MS, my sound no longer works. I rolled back to the last restore point, and then to the one just prior to that. Still doesn't work. I've changed no drivers in a long, long time.

Suggestions?

A:Sound no longer works

What is the status of your sound "card" in the Device Manager? Does it show working OK or does it have an error code.

If it is shown as working OK, RIGHT click on the entry for the sound device and then LEFT click "Uninstall" DO NOT check the box to also uninstall the drivers. Restart the PC and when Windows starts it will detect and reinstall the sound.

Read other 4 answers
RELEVANCY SCORE 73.6

Hello there, only recently my windows live messenger stopped working. I definitely think it has to do with my firewall identifying Windows Explorer as something to block. When I click WLM to start up, it shows in my taskbar for a millisecond then disappears. I have tried restoring my computer to a past date (a day ago actually) and it worked fine. But again today it has stopped working, so I guess it's an update? Any help appreciated, thanks!

A:Messenger no longer works.

Well, this is CactusJack, i just cannot use firefox and do not know my password for my other account( its saved in FF). Anyway I have discovered what it is, Win32/Parite. It has already affected approx 99% of my god damned program .exe's and i just hope it doesnt mess up IE so I can't post anymore. Does anyone know how to get rid of this crap!!!!!! I really don't want to have to re dl every frigging program, can somebody please help me!

Read other 2 answers