Over 1 million tech questions and answers.

Unknown USB Device (Set Address Failed)

Q: Unknown USB Device (Set Address Failed)

I have a Kingston HyperX 64Gb memory stick, formatted FAT32, that Win8.1 doesn't recognize. I plug in the memory stick to any USB 3 or 2 port on a Dell XPS15-9530 and Win8.1 appears to recognize it, assigns a drive letter then immediately says "unknown
USB device (set address failed)". The memory stick works OK in two other Win7 machines. Interestingly, yesterday, Win8.1 was saying that the USB device was unknown because Device Descriptor Request Failed but that has now changed to Set Address Failed.
BIOS is up to date. All updates to Win8.1 have been applied. Kingston have no drivers for this device. I've tried setting USB power setting "Selective Suspend Setting, both battery and plugged in, to disabled and it makes no difference. I've removed
the device in "devices and printers" and then rescanned in device manager with no success. Is there anything further I can do?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Unknown USB Device (Set Address Failed)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 72.8

I upgraded to Windows 10 a while back. Every time I open the computer I get a pop-up notification telling me the USB device is unrecognized. I have no USB devices in any of my 3 USB ports.
I sent my computer in twice. No help. They just uninstalled everything and reinstalled everything and told me it should be fixed. It is not. I then went about updating every driver in my Device Manager. I uninstalled the Unknown USB Device and then updated
other drivers. Certain drivers (such as PCI Express Root Port #3 - 9C14) when updating would also reinstall the Unknown USB Device, which I would then uninstall and keep working down the list. At the end of updating EVERYTHING I scanned for hardware changes
and "found" the Unknown USB Device. 
From what I can tell, and I know very little about this stuff, my computer can't name one of my USB ports. Since it can't figure out what it's called it can't download the proper driver for it. Since it can't download the proper driver it can't work properly.
The practical result from this is that one of my three USB ports does nothing when I put in any USB item (connect my android phone, thumb drive, presentation clicker, etc).
I've looked on tons of forums. My current thought is that if I can tell my computer what the deice is or download the right driver and tell my computer to use that driver for this device it should solve my issue. But I don't know how to know what the name
of the USB port should be (I imagine it woul... Read more

Read other answers
RELEVANCY SCORE 68.8

I was just working happily when my Microsoft Bluetooth Mouse just suddenly stopped working.
The Bluetooth settings page says "Bluetooth is turned off" and there are no options on the settings page or the system tray to turn Bluetooth on.
The Device Manager now has "Unknown USB device - device descriptor request failed" where it did not before.
Other devices all seem to be working fine - USB devices plugged in are being recognized and work properly. Only BT seems to be broken.
I've tried:
uninstalling the device and rebooting
installing the latest updated chipset drivers from the dell website
windows updates
pretty much all of the advice here: http ://troubleshooter.xyz/wiki/fix-usb-device-not-recognized-device-descriptor-request-failed

Any other ideas?
Thanks

A:XPS 15 9550 Bluetooth stopped working (Unknown USB device - device descriptor request failed)

So in desperation I just went into BIOS settings to see if there are any BT settings that may have become disabled. I didn't see any, and I didn't change any other settings.
After rebooting, BT and my mouse is now working again.
Something seems to be really flaky here, but hopefully this will help others with the same issue.

Read other 1 answers
RELEVANCY SCORE 68.8

I plugged my android device to my PC by usb ..it is saying USB device not recognized. Please help me.

Read other answers
RELEVANCY SCORE 68

Turned on phone and said to plug into computer with USB and open Hisuite.  Is it an app that i can download and also how do i get the computer to recognize the phone?

Read other answers
RELEVANCY SCORE 68

I HAVE TRIED THE WAY THAT HAS BIN SUGGESTION WITH NO LUCK
\_SB.PCI0.OHC1.RHUB.PRT2- BIOS DEVICE NAME
PROVIDER-MICROSOFT
IF YOU NEED MORE INF JUST ASK
PLEASE HELP

Read other answers
RELEVANCY SCORE 68

After installing Windows 10 anniversary update, I get the following error in the device manger: Unknown USB Device (Device Descriptor Request Failed)

Tried uninstalling and restarting PC. Reinstalled Windows made from media tool. Nothing fixed it. Did a google search and nothing has worked. No USB drivers on the PC maker's website.

Any ideas?

A:Unknown USB Device (Device Descriptor Request Failed)

You can try going into device manager > select show hidden devices and delete all "inactive" usb device appearances. In my example below, there would be four. Once done, reboot and try your device again:

Read other 6 answers
RELEVANCY SCORE 68

Fresh install of Windows 10 and the last driver I need to sort out is the above.

I believe it is my powered USB 3 hub to which I plug in my keyboard and mouse. Technically it is working but I don't like seeing yellow triangles on devices.

So are there any fixes?

A:Unknown USB Device (device descriptor request failed)

If it's a generic USB 2.0 Powered Hub then technically there's should be no drivers needed by Windows, if it's a USB 3.0 Hub then I'm unsure (since I don't own any USB 3.0 Hubs).

Might be a Windows bug, basically Windows can't find the description information to display the Hub's name in the Device Manager example: Generic USB Hub, Root Hub Device, etc....

I'm pretty sure everything is working as should, you're good minus the minor annoyance if all device connected through the USB Hub is recognized by Windows; if you right click Properties on the yellow triangle it probably says "The Device is working properly".

Read other 6 answers
RELEVANCY SCORE 68

Can any help with this problem? Have a Pavilion G6 with no USB 3.0 as I am aware. USB (3 ports) not working.However, when the plugged the mobile, the mobile does get charged. Device Manager shows "Unknown USB Device (Device Descriptor Request Failed)".   Running Windows 10 64 bit. Tried everything like uninstalling, updating etc as the information on the internet. Also, updated the drivers using Driver Easy but still getting the error. Any suggests, please? Thanks in advance. Sanil Sukumaran.

Read other answers
RELEVANCY SCORE 68

Greetings folks

I have a problem that bugs me for years, I never intentionally solved it, sometimes those errors disappears and all USB ports work fine, sometimes they do not. So anyone can help me please, it would be great.

Some of my ports do not work all the time, I cannot identify a specific moment. Inside the Device Manager, Universal Serial Bus controllers, I get 1, 2 or more "Unknown USB Device ( Device Descriptior Request Failed )", sometimes more sometimes less.

CPU: Intel Core i7 3770
Motherboard: AsROCK H77 Pro4/MVP
Windows 10 all available updates downloaded and installed as of today, and everyday. The problem appeared on Win 8 or 7, not sure when. So it's not necessarily Windows 10 specific. I ported it to 10.
Here is what they look like:
http://prntscr.com/d6rm6k

Bios is up to date. Chipset drivers updated, various solution tried from googling, I even managed to make all USB ports stop working testing some of these solutions, I had to restore windows from a ghost image I had.

It's like these USB ports remain suspended sometimes.

Any advice on what to try? The most annoying part is that from the frontal USB ports some stop working randomly too.

Thank you

Read other answers
RELEVANCY SCORE 68

hello    i'm an embedded developer. i have an usb type ic programmer to burn microcontroller. now i'm getting this error "Unknown USB Device(Device Descripter Request Failed)" while plug my usb programmer into my pc socket. but this same hardware support in my friend same hp430 pc.

Read other answers
RELEVANCY SCORE 68

Hey
1.)So my mouse(Corsair Harpoon RGB) was recently just working fine until one night i unplugged it and put it into computer and on that computer it didnt work so i went back to my laptop to plug it in there, but it showed the same problem it didnt respond the logo didn't light up so i went to the device manager and it said *title. So how do i fix this is there something with my mouse is there something with my software?
Oh yea and on top of that i have 2 more issues that i jut can't solve by myself.

2.) Unknown USB-device(port reset failed)
3.)DVD Drive(optical drive) doesnt show up on the device manager but it sounds like it's working and it opens and closes.
4.)Front ports of my PC doesnt work if i plug an USB in it doesnt do anything (it does work perfectly in the back)

I don't know though if i should make more threads but they somewhat relate to each other,
that's why they are just in 1 thread. If you need to ask any question, need pictures , my specifications or anything else just ask me.
Thanks in advance!
Best regards Hao.
 

Read other answers
RELEVANCY SCORE 68

I have had the Microsoft Wireless 2000 Keyboard and mouse for 10 months and it has been working fine. But recently when I plugged it in I got an error message which said :The last USB Device you connected to this computer malfunctioned. and Windows does
not recognize it.
I opened Devices and Printers and it said Unknown USB Device (Device Descriptor Request Failed).

Also it is on Windows 10 Home

Read other answers
RELEVANCY SCORE 68

Hello,  I seem to be having an issue with my Thinkpad T470p. I've had it for about a year and a few months ago, all the 3 USB ports stopped working and so did the integrated camera. It would work at times and then stop working. For the past 2 weeks, everything has completely failed. So far I've done the following: -I've reset the BIOS to default settings and still there is no change.-The USB ports are enabled in BIOS settings as well. -Fast startup is diabled-The autosuspend for USB devices has been disabled in the power settings as well-All drivers have been updated using the Lenovo System Updates-This is a fresh install of Windows 10 so there is no previous state that I can go back to. (It wasn't working when I was running Ubuntu either even with all the right drivers installed.)-Troubleshooting cannot seem to find a fix for the error either One weird thing though is that my WD Elemnts HDD works fine when plugged in to any of the USB ports but other than that nothing else works. Any and all help will be much appreciated. My warranty expired just before these issues started so I don't really think I can get it repaired by Lenovo services.

Read other answers
RELEVANCY SCORE 68

I know that a similar question has been asked before but, not with the last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
My question is; has anyone heard of Windows 8.1 having driver WHQL problems?? Very.

Any/all ideas, appreciated.

ps, I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.

A:Unknown USB Device (Device Descriptor Request Failed)

Is there only one USB port on the right hand side? Sometimes manufacturers connect internal devices via an unused USB port internally. USB ports are usually in groups of two, seeing only one port is usually a sign that the wiring has been redirected internally to something else like a Bluetooth adapter or wifi adapter. It may even be a card reader or touchpad. Is anything like that not working? If it is start looking for a driver for it.

Read other 19 answers
RELEVANCY SCORE 68

I have bought a new windows 8.1 Toshiba laptop when I connect my external hard drive witch was working ok before it's telling me - unknown usb device (device descriptor request failed) code 43

A:unknown usb device (device descriptor request failed)

did you try to go to power manager, shut off usb power saving

Read other 17 answers
RELEVANCY SCORE 68

My computer keeps telling me Unknown USB Device (Device Descriptor Request Failed), so I looked up how to fix it and they told me to uninstall it then scan for hardware changes and it will reappear working properly. Only it did not come back working properly, it came back the same. I am also 98% sure that this "unknown USB device" is my built-in webcam that has never once worked. So if someone wants to help me out and allow me to use my webcam that would be great!

A:Unknown USB Device (Device Descriptor Request Failed)

Hi there, can you first tell us what is the Name and Model number of your system?

What OS are you running

im sorry if you already listed this, as I cannot see your specs from the Windows Forum App..

I take it this is a laptop?

Read other 13 answers
RELEVANCY SCORE 68

Im running windows 10 on an HP laptop, 64 bit, and i just got a micro usb to usb device so i can transfer stuff onto my phone. It worked when i first got it but now it comes up with a Device Descriptor Request Failed and a Code 43 error. Ive tried updating
the drivers, restarting my laptop, and plugging it into different usb ports but it still comes up with the error. Any suggestions? 

Read other answers
RELEVANCY SCORE 64.4

I'm experiencing slim keyboard not being recognized in the Windows 8.1
The keyboard was working fine until just one day it just stopped working.
I tried factory reset literally 8 times along with most recent BIOS update and dell's recommended update software. + power setting --> disabling power saving on USB
It still come up as unrecognized each time even with fresh reinstall.
I was wondering if this is a hardware issue or just software bug from factory reset.
I don't think there is a available driver for this kind of problem is there?

Log Name:      Microsoft-Windows-Kernel-PnP/ConfigurationSource:        Microsoft-Windows-Kernel-PnPDate:          8/6/2016 1:09:35 PMEvent ID:      411Task Category: NoneLevel:         ErrorKeywords:      User:          SYSTEMComputer:      DellDescription:Device USB\VID_0000&PID_0002\5&1347b1a9&0&4 had a problem starting.
Driver Name: usb.infClass Guid: {36fc9e60-c465-11cf-8056-444553540000}Service: Lower Filters: Upper Filters: Problem: 0x2BStatus: 0x0
 

Read other answers
RELEVANCY SCORE 63.6

windows 10 user , my usb ports are working fine but when i insert a usb , it doesnt read , when i go to my device manager it says that it has stopped because of code 43 , i tried installing and re installin , enabling and disabling but nothing is changing , please help? i dont know what to do anymore

Read other answers
RELEVANCY SCORE 58.4

Hi,

I have a problem on my MI Notebook Pro device.
Reasons for failed automatic device encryption: Hardware Security Test Interface failed and device is not InstantGo. Any solution available?

Looking forward to your support.

Thanks,

Mahmudur

Read other answers
RELEVANCY SCORE 52.4

I have two issues, which I think are related. In the Device Manager, it shows under USB Controllers "Unknown device". "Windows has stopped this device because it has reported problems. (Code 43)"

I tried updating the driver, but the driver was correct.

I tried disabling the device.

I uninstalled the device. Windows reinstalled it at next boot, but the problem reappeared.

There is no Imaging Devices in the Device Manager.

At the same time, my webcam failed to open. Message "Webcamera initialization failed."

I downloaded the correct webcam program from Toshiba, installed it, but same result.

This all started when I uninstalled and reinstalled Skype. I have tried uninstalling it again, but still no webcam.

The webcam is enabled in the BIOS.

I really do not want to reinstall Windows.

All help appreciated.

Toshiba Satellite P500 16J
Windows 7 Ultimate x86
All updates installed

Read other answers
RELEVANCY SCORE 49.6

hello all. i dont come around to this site very often but i desperately need you guys help.

im trying to get a gamebridge i purchased a few days ago to work. the first day i had everything going according to plan and had it installed on there and everything, but then i was having problems with it... it wouldnt show my game screen. so i decided to install to a new usb drive.

i took the device out and tried to reinstall to another drive but it didnt work... and now when i try to put it back into the original drive it gave me an error. so i went into device manager and unistall the device manually from the original drive.

but now i try to install it again to any drive it give me the code 28 error...
someone please help me i really need to fix this problem.

thanks in advance!!!!!!!!!!!!!!!!!!
 

A:USB drive not properly installing device(GAMEBRIDGE). (unknown device code 28)

Read other 8 answers
RELEVANCY SCORE 49.6

hie i have just installed window 7 and this devices are missing, any help will be very much appreciated.
base system device
device id
PCI\VEN_1217&DEV_7110&SUBSYS_117C10&PEV_00
PCI\VEN_1217&DEV_7110&SUBSYS_117C10CF
PCI\VEN_1217&DEV_7110&CC_088000
PCI\VEN_1217&DEV_7110&CC_0880

UNKNOWN DEVICE
LOCATION; INTEL(R) 82801 DBM LPC INTERFACE CONTROLLER-24CC
HARDWARE ID;
ACP1\FUJO2BI
FUJO2BI

VIDEO CONTROLLER
LOCATION; PCI bus 0 device 2 function 1
HARDWARE ID
PCI\VEN 8086&DEV_3582&SUBSYS_120E10CF&REV_02
My laptop is FUJITSU-BIBLO MG13D

A:base system device, video controller and unknown device missing

Before I can help you, follow these instructions to let me know more about it: New to SevenForums? Fill out your system specs (this tool may help you out a great deal).

Read other 4 answers
RELEVANCY SCORE 49.6

Note: Device manager lists appropriate bluetooth antennae.  Some items are still showing up ok, but many (some new, some previously paired) are listed as unknown now, so they are useless to me until this is resolved.  This is a fairly new Flex5 (bought at Microcenter about a month ago).I ran the Lenovo "Vantage" program to get the latest bluetooth drivers on board.Tried uninstalling BT driver and running manual install of intel and Qualcomm drivers.  Windows10 is not seeing the Intel ones, I think as when I try to change the driver to the intel ones I only see the the QualcommAtheros and the generic bluetooth drivers available.  I ran that installation a number of times, but havn't been able to try the Intel drivers yet.  I'm not sure if they will fix the problem, but would like to try them, unless someone here can point me at something else that may be the cause.  Thanks for any info! 

Read other answers
RELEVANCY SCORE 49.6

I need assistance finding the drivers for my elitebook 8570w.  Hardware ids are attached.  Please help thanks

Read other answers
RELEVANCY SCORE 49.6

Hi everybody.

I just bought myself a Powercolor Radeon HD 4890 yesterday. After installing the card and the required drivers everything works like a charm. However, every time I start up my PC I get a message saying that a new device has been found on my system. On checking Device Manager I found an "Unknown device" entry under "Other devices".

I'm attaching a screenshot of Device Manager.

Are there any drivers I'm missing? It only happened after removing my old card (after uninstalling all its drivers) and installing the Radeon.

Any help is greatly appreciated.

Thanks.
 

A:Unknown Device In Device Manager After Installing Radeon HD 4890

I have a Powercolor Radeon HD 4890 (I also have a Gigabyte 4890 and XFX 4890 in two other PCs). I think you need to install the latest ATI Catalyst Suite. You may have installed the driver only package. Anyway, I think it has to do with the HDMI capabilities of the card. High def sound is built into the card (the HD part of the card name) and the HD sound driver is part of the Catalyst Suite. When you use an HDMI cable to an appropriate display, HD sound is also transmitted through the same cable from the Radeon graphics card.

Of course, be sure to install .NET Framework 2.0 as it is required before you can install the full Catalyst Suite. The HD sound driver won't install without it. At least I had trouble before I installed .NET 3.5. I went to Windows Update and installed .NET Framework 3.5. 2.0 is included in that update and 2.0 wasn't available separately.
 

Read other 24 answers
RELEVANCY SCORE 49.6

Hello,
I recently put together a new computer, and in the process of of installing the USB 3.0 connector from the front of my GX500 case, I either bent numerous pins on the motherboard USB 3.0 header or the motherboard shipped that way and I inadvertently made matters worse. Anyway, that header on the motherboard is without a doubt unusable.
Since I don't really need the USB 3.0 functionality, I bought a USB 3.0 -> 2.0 adapter cable, connected one end to the connector on the front of the case and the other end into the USB 2.0/1.1 header on the motherboard. Unfortunately, when Windows 7 boots and I plug a device into the front ports of the case, Windows detects the front USB ports as "Unknown Device" within Device Manager yet says the driver is successfully installed. I've already downloaded the most current Intel chipset drivers for my motherboard, deleted and reinstalled all USB drivers, and all rear USB connections are working perfectly fine - it's just the two front ports that are connected from the case to the USB 2.0/1.1 ports via the adapter cable.  I've tried both USB 2.0/1.1 headers on the motherboard, and I've tried plugging in several devices to the front USB ports, and this problem still persists.
I've ensured the connection inside the case is solid, yet I cannot get Windows to recognize the front USB ports.  However, I have confirmed that power is being sent to the front ports because it charges my phone when I connect it to the front USB ports via m... Read more

A:Front USB Ports not Working - "Unknown Device" in Device Manager

If your motherboard has a 1x pcie slot you can get a card like this...
 
Here
 
Some motherboards it's a tight fit because of the video card taking up space. In that case you can relocate the above card with this...
 
Here

Read other 6 answers
RELEVANCY SCORE 49.6

Hi,
My 7270 latitude touch screen stopped working shortly after first use (after win update worked again but for a short time).
All drivers are up to date.
In device manager a USB device shows as unknown (yellow warning triangle), otherwise there are no indications to the source of the problem.  There is no other touch screen device showing in device manager. 
How do I perminently solve this?
Thanks

Read other answers
RELEVANCY SCORE 49.6

applied.

Sorry that last word didn't get in the subject line.

So:
http://i.imgur.com/QoSy2wX.png

These two values are:
USB\VID_0CF3&PID_3000&REV_0200
USB\VID_0CF3&PID_3000
My bios info

http://i.imgur.com/FvPQweZ.png
So should I do this:

ASUSTeK Computer Inc.-Forum- driver missing
When I download that zip file from under "Install the Bluetooth driver:" it has so many files to choose from.... I don't know what to do?

I've also found out that I need to disable "boot from network" or "boot from lan" in bios to get rid of this unkown device issue?

A:Unknown device in device manager after Bios default settings are

Well it might be a good idea to look at the following tutorial:

Device Manager - Finding Unknown Devices

Use the link in Step 7

Also I tend to find this tool useful:

Download Tweaking.com - Hardware Identify Portable - MajorGeeks

Right click on each result in the list for more options.

Edit: On my machine a similarly named device appears to be a webcam.

In the list USB Composite Device doesn't mean much but matching the ID seems to indicate that it's the webcam.

Read other 4 answers
RELEVANCY SCORE 49.6

I have a unknown device in device manager. When I plug in my power cord to charge i get a black screen as soon as i unplug the windows screen comes back. Not sure if these are related or not.













Solved!

View Solution.

A:Unknown Device - Device Instance Path (ACPI\INT33BD\1)

Hi: I am pretty sure you need this driver.  The latest is for W8.1. This package provides the driver that enables the Intel SidebandFabric device. Intel Sideband Fabric Device Driver is a bridge tothe Intel Dynamic Platform and Thermal Framework. This package isprovided for supported notebook models that are running a supported operating system. File name: sp65474.exe I don't know if not having that driver installed is related to the black screen issue.   

Read other 5 answers
RELEVANCY SCORE 49.6

I have a Toshiba laptop, model L505-ES5018. I had Windows 7 Home Premium 64 bit installed on here, but decided to reformat my hard drive using Windows 7 Ultimate 64 bit. After the reformat was finished, I ran Windows Update and it found several items to download and install for me. I noticed that it also found optional items to download and install for me, so after all the important updates installed, I ran the optional updates. After all of this installed, I checked Device Manager to see if there were any errors and I found nothing. I assumed everything was fine. I decided to check Devices and Printers and under my laptop icon, there was a yellow icon with an exclamation point on it. I decided to run the troubleshooting option when I right-clicked the icon....it gave me a solution to download a Toshiba password utility program, so I did that and nothing happened, even after restart. Same icon appeared. When I clicked on the icon a second time, I noticed that the model of my computer at the bottom of this window, changed from L505 to TIAS. I have no idea what this is. I decided to do another reformat on my hard drive. This time, I ignored the optional updates. I checked Devices and Printers again, the same icon appeared but the model of my computer said L505, like it should. There is something in the optional updates that is changing this. Could it be the Intel chipset driver that the optional update is pushing? I'm not sure. I went back to Device Manager, th... Read more

A:Unknown Device in Device Manager/Show Hidden Devices

Hi there ... You should Install the chipset Driver and also the Realtek Driver for your card Reader ... From the Toshiba website ... The Link is provided below

Satellite L505-ES5018 – Windows 7 32 and 64-bit Drivers Download

Read other 2 answers
RELEVANCY SCORE 49.6

How do i figure out what driver or even component windows wants software for when in the device manager under other devices it lists an unknown device and windows update cannot find anything.

Oh and is it appropriate for me to use this topic to ask another question regarding explorer.exe as while i am inside a folder i delete (by choosing delete from the context menu in the tree view) while inside that folder on this particular laptop PC explorer. always crashes, collect information, sends it and restarts explorer. I have not experienced this problem on any other pc running any version of windows 7, oh and the same happened with build 7264 x32 and the current install of build 7600 x64.

A:Device Manager reports Unknown Device & explorer crash

Please fill up the System specs...

Read other 1 answers
RELEVANCY SCORE 49.6

I have Windows 7 Ultimate. Since very recently an unknown device keeps popping up in the device manager every time I start Win. It's reported location is within the front USB root hub but I haven't changed there anything lately. The device status reports "Windows has stopped this device because it has reported problems (Code 43)". I can uninstall/disable it but it will get picked up again the next time I reboot. All other usb devices (mouse, keyboard, web camera, APC UPS, external drive, printer) work fine. How do I get rid of this nuisance so that it doesn't reappear?
 

A:Unknown device: Windows has stopped this device because it has reported problems (Cod

Read other 6 answers
RELEVANCY SCORE 49.6

CONFIGFLAG_FAILEDINSTALL  0000040error 28error 31unknown device and unknown driver listed in device manager; only info is seems to be USB driver issue! 

A:CONFIGFLAG_FAILEDINSTALL unknown device unknown driver; won'...

Hello os4hwks Please try Installing the following driver and confirm. This is the Chipset driver-  http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55095.exe Can you even try providing the PID and VID for the unknown device? Please follow the steps below to obtain that info -  Click Start, Control Panel, Administrative Tools.In the right pane, double-click Computer Management.In the left pane, select Device Manager.In the right pane, search for the device you want to find the hardware ID.Right-click on Device and select Properties.In the Device Properties window, click the Details tab.From the Property drop down list, select Hardware IDs. A VID and PID number displays in the format:USB\VID_&PID_\ Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the KUDOS/Thumbs Up button to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.Thank YouAbhinab_Assists 

Read other 5 answers
RELEVANCY SCORE 49.2

hey, im having problems with plugging in my mouse to any USB port, this just started around an hour ago. ive checked on the brand's website which carried no complaints on problems like this with the same mouse. tried pretty much everything, even looking
it up on youtube and forums... Nothing has worked, worser still, i got it for christmas and its stopped working, ive looked though the device manager too. Please try and help me, if u can. I use Razer Naga Waith Red if that helps

thanks,
onyx

A:Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.

Hi onyx,
This error means a device driver notified the operating system that the device failed. This circumstance can occur if the device hardware fails or if the device driver fails.
Have you tried to update the device driver for test?
Please follow this guide trying t resolve this issue:
Code 43: Windows has stopped this device because it has reported problems
http://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspxKaren Hu
TechNet Community Support

Read other 2 answers
RELEVANCY SCORE 49.2

Hello, ok so after recently doing a clean install of windows 10(please don't get me started on that mess). my system has been plagued by random usb drops. it's where everything connected via USB suddenly disconnects then reconnects out of the blue. well I was using a Rosewill Transenclosure RX200R-APU-25B USB 3.0 dual 2.5 hard drive enclosure and transferring files from one drive to another (connected via USB) when one of these drops occurred. Now whenever I plug in my hard drive enclosure in a windows warning pops up and says "the USB drive that was just connected Malfunctioned and could not be installed" and in system manager it says "Unknown USB device (device descriptor request failed)". I know it's not the hard drives because I can remove them and use another connection and they work fine, all files intact. It's just now my hard drive enclosure won't recognize. This also happened to a "Loot crate exclusive Game of Thrones stark sigil 4GB USB stick I plugged in and turned into a windows 10 install drive. When I plugged it into use it after the windows media creator said it was done the USB stick was raw and unformatable. Please help. Microsoft keeps telling me it's a hardware issue even though it happened on two different systems. both operating windows 10 never any issue with windows 7 or 8.1

Dell N7110
i5-2450M about to upgraded to an i7-2820 if I can get this USB issue under contol
16GB Samsung DDR3 Ram
3-750GB HDD, 250GB HDD
EVGA GTX 1... Read more

A:Unkown USB device (device descriptor request failed) after disconnect

The driver could have been corrupted please re install the drivers for dell. Hope this helps

Read other 1 answers
RELEVANCY SCORE 49.2

I have purchased E5-573G-389U few months back. Since then I am not able to connect any of my mobiles be it Motorola or Samsung to the laptop. Everytime it says 'Unknown USB device (device descriptor request failed) driver error'.  I have tried a lot of options in your discussion forum but nothing worked. I am just fed up with the problem. I will request you to provide the solution to the said problem at the earliest. It was really a bitter experience buying this laptop. 

Read other answers
RELEVANCY SCORE 49.2

 I have hp 6570b with os win 7 professional 32 bit.it appear in device manager that there are some hardware need driver software.it shoes Base system device and unknown device.. Base system device hardware IDPCI\VEN_197B&DEV_2392&SUBSYS_17AB103C&REV_30PCI\VEN_197B&DEV_2392&SUBSYS_17AB103CPCI\VEN_197B&DEV_2392&CC_088000PCI\VEN_197B&DEV_2392&CC_0880 unknown device hardware IDACPI\HPQ6000*HPQ6000  

A:hp 6570b Base system device and unknown device

Hi, Should be the Card Reader driver below. http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5212928&swItemId=ob_115197_1&lang=en&cc=u... And HP 3D DriveGuard on the following link. http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5212928&swItemId=ob_110813_1&lang=en&cc=u... Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 49.2

My Notebook is HP-Pavilion 15 n087sr.OS installed window 7 .Unknown device and PCI device driver is missing from my laptop even after many effort I was not able to fix that.please provide necessary driver link and suggestions

Read other answers
RELEVANCY SCORE 49.2

REF http://forums.techguy.org/t39523.html

I have a very similar situation.

I have a windows 98se machine runnong on an Intel Celeron 600MHz with 128MB of ram.

The OS was just installed.
I am trying to instal an HP USB burner - I used this device before with no problems.

The drivers are located on a diskette. The manuf instructions advise to connect the power and usb cables and boot the pc with the diskette in the drive when windows finds the new hardware select the floppy drive.

When the pc is booted is finds new hardware lists it as "unknown device" and does not promt me for any input. If I go to device manager the device has a red x. I've tried to remove the device and reboot - same thing. I've tried to update the driver and it says the best driver is already installed c:\windows\inf\usb.inf

The ref url was resolved by changing the order of connecting the cables.....I have tried ever combo I can.
Can someone please tell me how to point to the correct drivers ?

Thanks
Daniel
 

A:WIN 98se auto installing a usb device as UNKNOWN DEVICE

Read other 8 answers
RELEVANCY SCORE 49.2

Hi Team, Please help me to resolve a problem, I've one unknown device in device manager I've tried to update drivers but issue didn't reolve after it. Can you help me to figure out what is this unknown device.  

Read other answers
RELEVANCY SCORE 49.2

hi, heres my problem:

* USB 2.0 doesnt work when plug in to USB port. XP gives message Unknown USB device. USB has malfunctioned..

* from device manager here is my USB devices.

SiS 7001 PCI to USB Open Host Controller
SiS 7001 PCI to USB Open Host Controller
SiS PCI to USB Enhanced Host Controller
USB 2.0 Root Hub
USB Root Hub
USB Root Hub

I have SP2 installed, did reformat my hard drive and install fresh windows XP. all the drivers are up to date and even the BIOS.

What is causing this problem? Any help would be greatly appreciated...

PS. When i disable USB 2.0 Root hub and SiS PCI to USB Enhance Host Controller. The storage drives work in USB 1.1. My external usb drive is a HITACHI 10 G hard drive.
 

A:USB 2.0 storage device malfunctioned in Windows XP. Unknown Device!?!

recently I had a friend who expierienced the same problem with a Nforce chipset after a fresh install of XP with SP2. even though SP1 and SP2 insclude the drivers for USB2.0 his usb 2.0 devices werent working. he ahd to go to the Motherboard makers site and download the USB 2.0 drivers and then it worked.
 

Read other 73 answers
RELEVANCY SCORE 49.2

I have an unknown device on Location Microsoft ACPI-compliant embedded controller.  The hardware device id isACPI\LEN0068*LEN0068 Thank you for your help.   Pete













Solved!

Go to Solution.

A:W520 Unknown device ACPI Embedded Device

'evening...
 
it should be the the ThinkPad PM device. please install the power management driver.
full matrix: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063273
pm driver: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014939
 
hth.

Read other 2 answers
RELEVANCY SCORE 49.2

Hi, I have a ProBook 640 G2 that reports device id ACPI\HPQ6007 unknown device. I cant find information specific to this system, can you help? Best Regards 

A:ProBook 640 G2 device id ACPI\HPQ6007 unknown device

Hi, Should be HP 3D DriveGuard on the following link. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=8430732&swItemId=ob_169876_1&swEnvOid=405... Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 48.8

We have some symbol windows mobile-based handheld devices that we use in our business.  We connect these devices to our computers to copy files to.  This all worked fine until recently the devices come up as failed.
It appears in device manager with a yellow exclamation point.
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.  (Code 19)
I've tried all the solutions I can find on the web and none of them work.
Including:
Uninstall the device in device manager and scan for changes.  It downloads the driver from windows-update and returns to code 19.
Tried hardware troubleshooter which basically seems to automate the process of uninstalling and scanning.
I've tried removing windows media player 12 feature and adding it back.
I've tried deleting USB controllers from Device Manager and rebooting, it re-detects them all and still gets code 19 on the device.
I've tried deleting upper and lower filter values in the registry which I found out later is mainly for CD/DVD devices, that didn't fix anything.
I've tried removing and re-installing Windows Mobile Device Center and driver pack and that did not fix it either.
Additionally Canon Powershot camera gives us similar results.  MTP USB Device failed.  
This is so far happening on 3 of our workstations that we know of.
At first we thought it was due to windows updates but nothing recent has been installed that looks rela... Read more

A:SOLVED:Windows Mobile-based device and Canon Powershot cameras showing code 19 and MTP USB Device failed.

Hi,

 

Thanks for posting in Microsoft TechNet forums.

 

Do you have Kaspersky installed? Kaspersky Filter driver caused that any USB device could not connect.

 

It is suggested to have a look at the following registry. Make a backup of it and remove the Upperfilters setting:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{EEC5AD98-8080-425F-922A-DABF3DE3F69A}

“Upperfilters” = klfltdrv

 

If the issue persists, please find a working machine and compare the registry settings.

 

Best Regards

Magon Liu

TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]

 
Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 13 answers