Over 1 million tech questions and answers.

Can't get on internet. www.microsft.com not responding.

Q: Can't get on internet. www.microsft.com not responding.

Note: XPS laptop computer running Windows 10

Tried to update drivers, et cetera, using Dells auto search tech support software. After I did so, I could no longer get on the internet via Wi-Fi. Other than getting on Wi-Fi, laptop is working.

When I attempted to troubleshoot problem using Windows network troubleshooter, I received the following error message: "Your computer appears to be correctly configured but the device or resource (www.microsoft.com) is not responding."

Having received the above error message, I did a network reset.

Identical problem still exists. Any help given will be appreciated.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Can't get on internet. www.microsft.com not responding.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 53.6

ok when i close the page it comes over and over again.multiple pages.they said "the page cannot displayed".up in the blue bar said cannot find server-microsoft internet explorer.believe me guys is a pain to see over and over this page pop up.i have windows xp.some sugestions are welcome.thanks for the attention.
 

A:problem with microsft internet explorer

Try these 2 options first:

IEFix: http://windowsxp.mvps.org/IEFIX.htm

IE Repair: http://www.theeldergeek.com/repair_ie6.htm

If they don't help, click here to download HJTsetup.exe: http://www.thespykiller.co.uk/files/HJTSetup.exe
Save HJTsetup.exe to your desktop.

Double click on the HJTsetup.exe icon on your desktop.
By default it will install to C:\Program Files\Hijack This.
Continue to click Next in the setup dialogue boxes until you get to the Select Addition Tasks dialogue.
Put a check by Create a desktop icon then click Next again.
Continue to follow the rest of the prompts from there.
At the final dialogue box click Finish and it will launch Hijack This.
Click on the Do a system scan and save a log file button. It will scan and then ask you to save the log.
Click Save to save the log file and then the log will open in notepad.
Click on "Edit > Select All" then click on "Edit > Copy" to copy the entire contents of the log.
Come back here to this thread and Paste the log in your next reply.
DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required.
 

Read other 1 answers
RELEVANCY SCORE 41.6

Hello. This is not my first time posting on bleepingcomputer, but the last time I had a problem was so long ago I have forgotten the account details. However I was so impressed by the help I received, I thought I should come here again if I ever suspected anything might be amiss with my PC. Speaking of which:
 
I have recently had an unfortunate sequence of events  over the past two days, and I'm unsure if it's just a group of unrelated problems or if they're connected somehow.
I have also left various windows updates waiting to be installed for an embarrassingly long time, which helps lead me to suspect I might have left a backdoor open somehow.
 
 
The sequence of events are thus:
 
12th of july
 
Painfully slow broadband on the 12th of july, suspected to be issues with my ISP. They apparently were performing maintenance on the 11th, but had also finished.
Malwarebytes very slow to update due to aforementioned broadband woes
Internet issues appeared to fix themselves later in the night.
 
 
 
13th of july
 
Broadband drops to half of the speed of the night before, and fluctuates lower still throughout the day.
Malwarebytes suddenly unable to update, sending me an error message that I have currently forgotten. Something along the lines of "Program_error_updating (0,0,I/O error)" (Not the exact words, will update if I can find it exactly)
After a reboot, malwarebytes was now ignoring attempts at updating... Read more

A:Slow internet, Malwarebytes, Norton Internet Security and Steam not responding

Please download Junkware Removal Tool and save it on your desktop.
 
Shut down your anti-virus, anti-spyware, and firewall software now to avoid potential conflicts.
Run the tool by double-clicking it. If you are using Windows Vista or Windows 7, right-click it and select Run as administrator.
The tool will open and start scanning your system.
Please be patient as this can take a while to complete depending on your system's specifications.
On completion, a log is saved to your desktop and will automatically open.
Please attach the JRT log.

Please download AdwCleaner by Xplode onto your desktop.Close all open programs and internet browsers.
Double click on adwcleaner.exe to run the tool.
Click on Scan button.
When the scan has finished click on Clean button.
Your computer will be rebooted automatically. A text file will open after the restart.
Please post the contents of that logfile with your next reply.
You can find the logfile at C:\AdwCleaner[S1].txt as well.

Please download MINITOOLBOX and run it.
Checkmark following boxes:
Flush DNS
Reset FF proxy Settings
Reset Ie Proxy Settings
Report IE Proxy Settings
Report FF Proxy Settings
List content of Hosts
List IP configuration
List Winsock Entries
List last 10 Event Viewer log
List Installed Programs
List Users, Partitions and Memory size
List Devices (problems only)
Click Go and post the result.     

 

Read other 17 answers
RELEVANCY SCORE 40.8

I can't access microsoft, windows update or any microsoft websites

A:Microsft sites

Try the Microsoft FixIt: 0x80080008 error message when you try to install updates by using Windows Update or Microsoft Update

Read other 2 answers
RELEVANCY SCORE 40.8

Can anyone help me with a annoying problem, each time I close ms word out I get the message "The file Normal already exist. Do you want to replace the existing file.", the only way I can close ms word out is save the file.
I have tried deleting the file with no success.
Please help this is driving me crazy!

Ed

A:Microsft Word

Hey Ed I have read a few instances where Norton Anti virus has intercepted files to do a virus check and has not surrendered the document to Word. Do you have norton installed?Also, i have a few normal.dot's on my computer - are you trying to delete the right one? The one you want to remove should be loacted in:C:\Documents and Settings\yourusername\Application Data\Microsoft\TemplatesYou normally won't be able to see this folder, so you will have to show hidden file:http://www.bleepingcomputer.com/forums/t/43032/how-to-show-hidden-files-in-xp/Let me know if any of that works - i'm sure others will chip in with thier comments.David

Read other 2 answers
RELEVANCY SCORE 40.8

Hi there, just built new computer and im having some issues.
everything is fine untill i start playin a game(WoW) and comp shuts down,


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007E6B028
BCP3: 00000000BE000000
BCP4: 0000000002000102
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\122610-15069-01.dmp
C:\Users\Memnoch\AppData\Local\Temp\WER-72680-0.sysdata.xml
 

A:Microsft BC Code 124

these are the minudump files
 

Read other 1 answers
RELEVANCY SCORE 40.8

Buffer overrun detected!
Program:\WINDOWS\Explorer.EXE
A buffer overrun has been detected which has corrupted the program's internal state. The program cannot safely continue execution and must now be terminated.
What does this mean?
I recently have been infected with a Smitcore virus and downloaded Smithfix to get rid of it, then it happened after I ran the program... I'm not quite sure how to uninstall Smitfix to check if thats the problem...
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:47:22 PM, on 7/16/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ikeoubnl.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\New Boundary\PrismXL\PRISMXL.SYS
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\xwmsjvsA.exe
C:\Program Files\QuickTime\QTTask.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system32\fxssvc.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\WINDOWS\system32\wscn... Read more

A:Microsft Visual C++

Hi there,

It looks like you're infected. I have reported this thread and asked for it to be moved to the security forum.
 

Read other 3 answers
RELEVANCY SCORE 40.8

Hello, I have two questions. [1] I transcribe old historical documents for a University archive. After I transcribe them into Microsoft Word documents, the originals are archived. The project began about eight years ago when my computer had Windows 3.1. Then I upgraded to Windows 98 and lately toWindows XP Professional. With 98, I had Microsoft Office 2000. With XP, I have Microsoft Office 2000 Professional. I cannot remember the Microsoft Word system I had with Windows 3.1. To date, 8000+ Word docs are on my local 'C' disc in my computer. However, something happens with XP which did not happen with 98, and it is a time wasting irritation. I must open documents to cross-reference information. When I open one which was created when I had 3.1, or 98, and alter it and save the alteration, an orange coloured box flashes on my task bar. I click the flashing box and sometimes nothing happens. I click to close the document and a window appears with this script ' whatsit.doc is a Word 6.0 or 95 for Windows document. Do you want to update it to the latest Word format? To overwrite click Yes. To save in current format click No'. I reckon that I have already updated forty or fifty, the rest are waiting their turn to flash the orange box. But I will not have to open all of them for the cross-reference of information, so I will always have a mixture of updated and non-updated documents. Is there a way that I can update all of my Word documents, en masse, with one or... Read more

A:XP and Microsft Word

Hello oldsoldier and to BC.

The second question I can answer for you but not the first.

Go to your control panel, in the top of your screen, left hand side, you will see File, Edit, View, Go etc.

Click on view and then "Details".

This will change your icons to a detailed view.

Now we have to set this view as the default setting so it will stay like this when you open a window up again.

In control panel again, look this time for "tools" this is the second last one, next to "help".
ok, follow this.......Tools / folder options / then click on the "View" tab and in folder views, click on the "apply to all folders" button. Then click on "Apply" at the bottom of this box and then OK.

Thats it, now, whenever you open a window you will have your details view back again.

Cheers

Read other 4 answers
RELEVANCY SCORE 40.8

What is Microsoft number?

Read other answers
RELEVANCY SCORE 40.8

I have tried repeatedly to set up my microsoft outlook account without success. I have followed each step but still cannot send/receive messages. I am not understanding could someone please help me I am in need especially to send messages.
 

A:Microsft Outlook

Hi agilmore, and welcome to TSG.

I would probably help us to help you if you told us exactly what version of Outlook you are using and what e-mail service provider you wish to connect with using Outlook.
 

Read other 3 answers
RELEVANCY SCORE 40.8

I am trying to add new contacts to existing files of contacts. I have tried entering new data from that paticular file a.It will not allow me to save all the data. I can add the persons name and email to the pop up box but not the company name. Trhen regardless does not save the info in that file.What am I doing wrong.

We just transfered our files from Hotmail to Outlook.

Read other answers
RELEVANCY SCORE 40.8

Can anybody please help me !!

I have just purchase a new hp pda with windows mobile 5.

I have a database in MS Access 2000 which i would like to be able to use on my PDA to enter data and results when i am going around on site instead of luggin my laptop.

Is there a way this can be done, i want to be able to get home at night any syncronise the two and use my laptop to print of my reports etc. Can in install Access from my office cd directly on to my palm pilot will this work

what do you suggest is the a program i need to use to convert my data base so it can be used on my handheld ??

Thankyou
 

Read other answers
RELEVANCY SCORE 40.4

I have entered all my bank statements into MSMoney, How do I get an annual print out with them divided into various catogeries i.e. motoring expenditure, household expenditure,fuel bills,postage etc? I'm using WinXP
 

A:Solved: Microsft Money

It's a while since I had Money installed. You have to go into Reports -- it's either on a menu or a link/dropdown. There are some basic pre-defined ones, pick one that looks close to what you need, then adjust the options (group by, etc.) as required.
 

Read other 3 answers
RELEVANCY SCORE 40.4

Error codeox8004ffo7. Can't install. Tried the basic things.

A:Microsft security essentials

Hi, and welcome to TSF.

What antivirus program were you using before ?

Read other 2 answers
RELEVANCY SCORE 40.4

I have a samsung laptop running on Windows 7 - I have had this laptop since 01st September 2012. It has recently (over last 4-6 weeks) started showing the following message:

Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.

Object reference not set to an instance of an object.

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at AVUS.Form1.CheckUpdates()
at AVUS.Form1.Form1_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5466 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
---------... Read more

Read other answers
RELEVANCY SCORE 40.4

Greasemonkey fix is releasedBy Brian Livingstonhttp://windowssecrets.com/comp/050630/#story1The developers of Greasemonkey, a popular "extension" for the Firefox browser and other Mozilla Foundation software, released on July 30 a new version that corrects a serious security flaw. I warned about this risk in a brief news update on July 21, 2005.The add-in enables users to redefine how Web sites look and behave. Unfortunately, older Greasemonkey versions, such as 0.3.4, allow hacker sites to read the names and contents of any files on users' hard disks.According to Aaron Boodman, one of Greasemonkey's developers, the new beta version 0.5 closes the worst security holes. Other developers who've looked at the new code agree. Some glitches exist with the beta release, however. Although 0.5 makes it difficult for a rogue Web site to read the source code of a Greasemonkey script, it's not impossible, the team says.Boodman recommends that people who don't want to watch out for these gotchas use version 0.3.5 of Greasemonkey instead. That version was released on July 19 and also eliminates the security flaws.Read the entire article for more information.GreasemonkeyGreaseblog

Read other answers
RELEVANCY SCORE 40.4

I cannot open Microsoft Works word processor. It just keeps telling me that the program is unresponsive. It's only not working on my user account- my husband's is fine.

Can anyone help? Thanks!
 

A:I can't open Microsft word

Try cleaning up your hard drive:
http://www.officearticles.com/misc/how_to_clean_up_your_hard_drive.htm

Or deleting your normal.dot, which could be corrupt:
http://www.officearticles.com/word/steps_to_troubleshooting_microsoft_word.htm
 

Read other 2 answers
RELEVANCY SCORE 40.4

I was recently the victim of a virus, and thought I had managed to restore everything, but when I am in Word and I try to format a picture (eg wrapping style), I get a message telling me "the server application, source file, or item cannot be found. Make sure the application is properly installed, and that it has not been deleted, move or renamed". Is there any way to restore Word back to normal.

A:Microsft Word 2003

2 KB articles on thishttp://support.microsoft.com/kb/290942http://support.microsoft.com/kb/224034

Read other 1 answers
RELEVANCY SCORE 40.4

I have been using Microsoft Money 2004 for the past 9 years without any problems. Today, Microsoft Money suddenly closed and when I tried to open it with the password I just received an error report, this happens every time I try to open the programme and I cannot access my fionancial data. I know MS no longer provide support. Can anyone help please?
 

A:Cannot open Microsft Money

Read other 12 answers
RELEVANCY SCORE 40.4

Hi, I am unable to upload a picture in my 2010 Ford Edge with Microsoft Sync. I have put the picture on a cd and get a read of unsupported or bad disc. I have tried a CD and a DVD but with no success. I use a brand new Lenovo with Vista to load the CD.
Any ideas? I am under file size recommendations as well.
thanks.
 

Read other answers
RELEVANCY SCORE 40.4

How do i stop the microsft office trial pop-ups from running? I don't want to buy it right now and the pop-ups are making it impossible to work in the older version of office
 

Read other answers
RELEVANCY SCORE 40.4

Hey everytime i download .net framework 2.0 it says i need to have Microsft windows installer 3.0 and i download that and it still gives me that error. Whats wrong is there a specil site to get it from to make it work? Because i got it off of microsft.com.. But please someone help me..
THanks
 

A:.net Microsft windows installer 3.0

Here a pic of my problem. When i download the thing it needs i still get that message
http://i2.photobucket.com/albums/y24/Bighomedog11/probl.jpg
 

Read other 1 answers
RELEVANCY SCORE 40.4

I cant use any download I have because it says check internet connection. also enternet explorer doesn't work either. google and firefox wont download cause their is internet problem. I don't have internet problems on my phone and I'm currently posting this from my laptop that is having this issue. I would love to hear back on how I can fix this. I'm also currently running win 10 and the computer is a Toshiba satellite. This problem has been accruing a month after I had completely wiped my computer.
 

Read other answers
RELEVANCY SCORE 40.4

The laptop does not respond to the MS password. It is brand new and I set it up about a month ago but of afraid to use it since.I have followed the MS instructions to reset the PW  but Iafter several minutes I cannot get any further than the pretty picture on the screen .any advice would be most appreciated 

Read other answers
RELEVANCY SCORE 40.4

It takes forever to get a print dialog box when I click on the printer icon in Microsoft Word 98 for Macintosh. I do not have this delay from other applications. My printer is an Epson 740S. Has anyone had any experience with this problem? Marty
 

Read other answers
RELEVANCY SCORE 40.4

i opened a known website and now seem to have a virus - cant go beyond it in microsft exchange browser.  help?

Read other answers
RELEVANCY SCORE 40.4

I Tried to set up my microsft bluetooth intellimouse and It works on and off.
I get a system event notice :Event Source: BTHUSB
Windows cannot store Bluetooth link keys on the local transceiver because it cannot determine whether proper security is enabled for the device.

and this one: Event Source: HidBth
Bluetooth HID device (00:50:f2:7f:f3:82) either went out of range or became unresponsive.

when I go to Help and Support Center at go.microsoft dot com they say they have no information on this

Thanx for any help

xp pro sp2 all updates, zone alarm pro,asus m/b p4c800 deluxe, p4 3.0, no other bluetooth devices
 

A:microsft bluetooth intellimouse

Some bluetooth problems seem to be post SP2. This is a general bluetooth troubleshooter from Microsoft

Bluetooth
 

Read other 2 answers
RELEVANCY SCORE 40

When ever i try to use a best software or a game it crashes and says''MICROSFT VISUAL C++runtime library''C:/program files/games/alien-shooter.exe R6002-Floating point not loaded
please help

A:MICROSFT VISUAL C++runtime library

Are your Microsoft updates all up-to-date?

Net Framework 3.5 and C++ 2008 ?

You may want to uninstall Net framework 3.5 and Microsoft C++ 2006 from Add/Remove Programs, reboot and then reinstall them.

Read other 1 answers
RELEVANCY SCORE 40

My wife has an LG DVD rewritable drive to burn movies. She was very successful doing what she wanted but now after she allowed Microsoft movie maker updates to download, it took over her LG and now she has everything converted to their movie maker. She is unable to do anything, are there some instructions I can use to avoid Microsoft movie maker and continue to use LG? Thanks very much
 

A:Microsft Movie Maker took over DVD burning

Are you using Windows XP or Windows 7?

If in XP, click Start->All Programs->Set Program Access and Defaults
or
Start->All Programs->and look for the Windows Medial Player and Windows Movie Maker set on the right side.

Right click on those to determine which changes you need to make to defaults.
 

Read other 1 answers
RELEVANCY SCORE 40

Hello Every one!Need Some Help With Windows XP Pro Sp2Lately I Update From Microsft Windows Update..This reliability update KB930916I Didn't Pay Attention About That Update. I Was Fast Clicking,And Download And Install An Update That I Do Not Need.. It Was Not Necessarily For My ComputerI Did Not Had This Problem That Microsoft Describe.. "This is a reliability update. Install this update to resolve an issue where a third-party driver installed on a computer that is running Windows XP may prevent you from opening files successfully on a NTFS file system volume."I Was Thinking That Was Security Update Issue,(It Was Late At Night, And This Is The Time That Mistakes Happened).Now After This Update.. There Is 2 Hardware That Are Not Working1. USB Flash Drive SanDisk Cruzer Micro 2GB.. With U32. ATAPI CD-RW. When I Stuck The USB Flash Drive To The USB Port, It Start The Auto play, And Stuck With The Auto play, Cancel Won't Stop It.. If I Press Shift Before I Connect The USB Flash Drive, The Auto Play Is Disabled, But When I Go In To My Computer.. I Do Not See Nothing.. The Computer Freeze, And Only Reboot With The Quick Little Boot Button On The Computer Is Doing The Restart,Ctr+Alt+Del Bring Up The Task Manager, Choosing Shut Down Tab, And Restart..Windows Refused To Do The Restart...Normally Before That KB930916 Windows Xp Update.. When I Connect The USB Flash Drive, I Got The Sandisk Launchepad Opened, And It Was Working Fine.I Uninstalled That Certain Mi... Read more

A:Problems After Microsft Windows Update

hi mate not a expert but go to set program access and defaults click on add or remove make sure show updates is on then find the update you want to remove.try that it might work

Read other 3 answers
RELEVANCY SCORE 40

I have a computer that has just been updated to Microsoft 2007. An Access 2003 database we use opens in 2007, but none of the "Report Preview" buttons work. When clicked, nothing happens at all.
I tried just putting a new button on with the wizard when opened in 2007 & it doesn't work either. The buttons still work when opened on a 2003 computer.
Any suggestions please. (I believe all the computers are using Windows XP)
 

A:Microsft Access 2003 - 2007

This is a known problem with Access 2007.
Ensure that the VBA Editor's References are correctly set.
If that doesn't help, try creating a new form with a command button and see if that works.
 

Read other 2 answers
RELEVANCY SCORE 40

Hi,

I have a computer linked through a SSH/VPN network connection, however I noticed there is simply no way Windows able to login to any Microsoft account, be it trying to create a new one, or sign in for an app such as market. While I can view the market without issue, but unable to sign into download any app through the SSH/VPN network.

Is there any work around for such issue or Windows online account just not made to work through these types of connections?

All the error messages in W10 really not helping at all, just "something happened", duh~

Read other answers
RELEVANCY SCORE 40

Hi
In Edge phone numbers are converted to HyperLinks prefixed with Tel://

The first time I clicked on it opened in the phonedial app, not it opens chrome.

Any way I can reset this or force it to open with phonedial.exe ?

Thanks

Read other answers
RELEVANCY SCORE 40

I get disconected all the time with this message:

Runtime Error!
Program:C:\PROGRA~1\Yahoo!\browser\ybrowser.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application 's support team for more information. What can I do? Please help!!!

A:Microsft Visual C++ Runtime Library

Disconnected from what? Without details about what you are trying to do, using what program, and what exactly is happening at what point, how are we supposed to guess? Have you tried uninstalling and reinstalling the offending program?

Read other 1 answers
RELEVANCY SCORE 40

I am trying to download and install User Profile Hive Cleanup Service from Microsoft onto a Vista machine and I keep getting the following error. How is this fixed? Thank you.

"There is a problem with the Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
 

A:Solved: Can't download an application from Microsft

Read other 8 answers
RELEVANCY SCORE 40

Hi
In Edge phone numbers are converted to HyperLinks prefixed with Tel://

The first time I clicked on it opened in the phonedial app, not it opens chrome.

Any way I can reset this or force it to open with phonedial.exe ?

Thanks

Read other answers
RELEVANCY SCORE 40

I am starting college online on Monday..I received my software(Microsoft Office Professional Plus) I tried installing it..nothing happened..I fiddleded with some stuff..still nothing. I troubleshot everything that u possibly could and then I called tach support with my college..she said I have a dvd driver problem..What do i do to fix this??
If you could pleasse helpp meee It would be greatly appreciated!!:grinthumb
 

A:Problems installing Microsft Office

What exactly did the tech support say besides "you've got a DVD driver problem"?

Can you run anything else off of this DVD drive?

You can go to your DVD drive manufacturer's website and see if they have drivers you can update for your drive.
 

Read other 3 answers
RELEVANCY SCORE 40

Hello,

I have a Microsoft headset which I have been using fine until today. When I attempted to use it today the computer shows it as unplugged. The interesting thing is that when i unplug it it shows as plugged in :s

Any help on solving this would be appreciated.

A:Microsft headset not being detected when plugged in

ok it started to randomly work all of a sudden... however now it says my speakers are unplugged which they are not

Read other 5 answers
RELEVANCY SCORE 40

I constantly receive these error messages:
Heading is MICROSOFT WORD
Changes have been made that affect the global template, Normal. Do you want to save those changes.
YES NO Cancel

also:
The file Normal already exists. Do you want to replace the existing files.
YES NO CANCEL

What do these error messages mean? and what do I click on.
Thank you
 

A:Microsft Word Error Messages

http://http://support.microsoft.com/kb/291352
Here is a link to an article describing some causes and solutions to this problem.
It explains how to turn off the option to promt to save the normal template. If you have already turned this off, I would search your computer for normal.dot and delete it. It will be recreated when you re-open Word.
 

Read other 1 answers
RELEVANCY SCORE 40

Hi,

When you insert an image into Microsoft Word (I'm using 2003) and then alter the image (e.g. make it greyscale, crop it etc), Word then creates a second version of the image which it keeps a record of, making the file size larger. Is there anyway I can get Word to erase the original image version, and just keep the new version (e.g. the greyed, cropped one)?

My eBook I'm creating is very large with several hundred images etc, so I'm keen to do this.

Thanks in advance,
Karen
 

A:Microsft Word image versions

Why don't you do whatever you want to the images BEFORE inserting them? Sure is a lot easier. There are quite a few free programs available to do it. Irfanview is one I use.
 

Read other 1 answers
RELEVANCY SCORE 39.2

I know it probably doesn't have a Profiles feature like Google Chrome, but is there any similar features in Edge? Basically I want to use different logins etc., and I've been doing that via Chrome but I'd rather use Edge if I can.


The same question for internet explorer^

Read other answers
RELEVANCY SCORE 39.2

I have used my Lexmark Software to scan a resume and make it a pdf file. It is not in microsoft word. I need to know how to find the pdf file and how to convert it to my microsoft word so that I can edit it. Please help. Thanks

P. S. The pdf file is located in my Lexmark info but I don't know how to get it to microsoft word in order to edit it.
 

A:Finding and converting my PDF files to microsft word

bump
 

Read other 3 answers
RELEVANCY SCORE 39.2

My mobo is an acorp 4pm800mnl, and I installed the 4 in 1 via hyperion drivers with service pack 2 installed, and its giving me alot of problems.
I went to the acorp's web page and they say that i gotta have the microsoft default agp driver but before installing sp2.Do I have to reinstall windows or just reinstall sp2 so that i can get the right driver?
 

A:Does any body know how to install the microsft default agp driver?

Not quite following what you mean.

Can you give a link to the info you found on acorps website?
 

Read other 10 answers
RELEVANCY SCORE 39.2

Hi Folks
I worked with "Wireshark" and also with "Microsoft Network Monitor".
Both has Autoscroll you can choose or not.
I can't find this option on this new version "Microsoft Message Analyzer".
Could you help please?

Regards
Kevin

A:Where is auto scroll in Microsft Message analyzer?

We don't have a real Autoscroll yet.  Though you could sort by time if you want to see the latest messages.  There are also known issues in how the scrolling works when loading a trace which we hope to address.
Paul

Read other 2 answers
RELEVANCY SCORE 39.2

Have a Dell XPS L502X.With Windows 7.
Have installed Microsoft office 2003.From an old disc.
All my old files and documents (downloaded from clickfree back up) are fine.
A new window opens when i double click desktop icon and i can type new contents, but when i copy and paste i just get a black square appear.
Even documents written using the program wont paste.
 

Read other answers
RELEVANCY SCORE 39.2

HelloI have already installed this microsoft XMLs updates 4 times WITH success and AGAIN it request to install the same update.Recommendations?Thanks in advance

A:Vista Home premium XML microsft update

Hello,
FYI this has been solved with the help of Microsoft support.

Read other 2 answers