Over 1 million tech questions and answers.

PNY pendrives cant boot

Q: PNY pendrives cant boot

Experiencing the same problem than

http://forums.techguy.org/hardware/1044627-cant-boot-usb.html

looks like the issue is in the pendrive itself. I have two PNY pendrives, one 8GB and another 16GB. I can use YUMI or any other app to add a distro to the pendrive, format them, etc, but when booting the BIOS does not recognize them.

Tried in an old X31 laptop and in a new HP ProBook laptop with same (bad) result.

I though it was because of the big size but many people use 16GB pendrives for these purposes...

(BTW, tried also formating them and the distros were way smaller than 4gb...)

Read other answers
RELEVANCY SCORE 200
Preferred Solution: PNY pendrives cant boot

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 47.6

How many of you use pendrives? (USB flash memories?)
I'm looking forward to buy one cause I really need it due to my work, I've been using an SD card with a pocket SD card reader but it doens't work anymore.

So, any suggestions regarding brands?
I hear kingston and sandisk are good ones, I don;'t want to buy a ****** pendriver cause they say they go blank if it;s too hot or go erase all your data after a while.

Ok, your turn now! thanks people!
 

A:Pendrives

Read other 8 answers
RELEVANCY SCORE 47.2

pendrives malfunction for xp

Read other answers
RELEVANCY SCORE 46.8

Thank you for adding me to the site. I'm looking to import a quality pendrive and charging cables from Taiwan. What sort of pendrive should I be looking at ( memory etc) and with regards to cables are there any different products. I find most of my cables don't last long. Any help in this would be greatly appreciated as this is a new venture for me. Thank you.
 

Read other answers
RELEVANCY SCORE 46

unable to connect pendrives to the laptop

Read other answers
RELEVANCY SCORE 46

recently i had set an password for detecting the usb flash drives later on my usb ports are not working in my pc please suggest an usb port drivers to my pc  hp pavilion g6

Read other answers
RELEVANCY SCORE 46

Greetings !
I apparently have some sort of shortcut virus on my pendrives. I used one on a public computer and when I reconnected that pendrive to my home laptop, all I coul see were shortcuts of the .ink kind. And when I double clicked on one it would open the cmd window and give me an error that microsoft.vbs couldn't be found. Later I connected another pendrive (one without the virus) and everything got converted ionto shortcuts again. I unchewcked the "hide essential windows files option" in folder options, so I am able to see my files on the pendrive along with the shortcuts. Both avg and malwarebytes have failed to solve this problem.my harddrives seem unaffected. Any help will be appreciated thanks !

A:some sort of shortcut virus on my pendrives?

reformat the pendrives.
 
my computer>rightclick on offending pen drive>format>fat32 quick format.
 
will erase EVERYTHING from the drives.
 
I suggest you do an advanced malware scan with something like ESET online scanner though, just to be sure you don't have nasties carried across.

Read other 8 answers
RELEVANCY SCORE 46

Hi All,

I have an issue with my machine: I can't copy any files on pendrives or SD cards, unless I'll run Windows in Safe mode, everything works OK (all the pendrives or SD cards are working fine).

Tried to fix dll's, scanned for Virus even managed to format one pendrive (thought it was broken at first) but still couldn't copy any files.

The error I am getting: You'll need to provide administrator permission to copy to this folder.

I don't even have to mention that I am administrator?

Any ideas?
stanitr

Read other answers
RELEVANCY SCORE 46

I use two notebooks. One running Win8.1 PRO (64bits), the other Win7 Home Premium (32bits).
I also have an external HD, and three pen-drives I use with both notebooks, as needed.
Some programs I use (a password manager, bkups, between many others) save data on these drives, and I need that the drive letters attributed to them DO NOT CHANGE no matter the notebooks they are connected to.
My problem is that the letters given to these drives keep changing when they are used on the notebooks and the programs can't find the paths to store or retrieve data from.
How can I make the drive letters to remain the same no matter the notebook they are being used with?
To choose the drive letters I use the Control Panel "Administrative Tools<>Computer Management<>Disk Management"

Any help will be welcome.

Cheers, and a Happy Holiday Season.

Flores

A:How to avoid pendrives letters changing?

I don't know if this will help but for years I have set my CD/DVD drives to Y: and Z: so that adding drives doesn't muddle it all up. How about setting the letter as Z: and seeing if that helps?

Read other 12 answers
RELEVANCY SCORE 46

Hi all,
        I have a pendrive which having FAT32 file system previously.now what i did i open the pendrive in hex editor.i found that root directory contain entries about

myfiles.and it having high order cluster byte set to some value . now i traverse the file system  with corresponing cluster no. by conveting it in  offset value .i found the data of my file at the corresponding offset. 
             Now what i do i format the pendrive . due to formatting the pendrive the high cluster byte of corresponding file in root directory set to 0,so i am unable to traverse  data. of file.
             is their any solution so that i can found my data...............H.S.Navarkar

A:how to recover data from formatted pendrives

 
Hi,

If you want to recover the data from formatted drive, you need
 special software and competencies. When you delete or even format a disk, the files aren?t really deleted, they are marked to be overwritten.

Since there?s no such software from Microsoft, you need search it yourself. Also please note third party may cause unexpected issue.

There?s a similar thread may helpful to you:
http://social.technet.microsoft.com/forums/en-us/w7itprogeneral/thread/50E592A4-D09F-4F93-965B-D50ABC4121AD

Thank you for your understanding.
Regards,
Leo  
Huang
Leo Huang
TechNet Community Support

Read other 5 answers
RELEVANCY SCORE 46

Okay for some weird reason my PC are not detecting any USB storage devices plugged in... i found this in device manager (attached pic) ..

however nothing i can do.. tried update online nothing helps... so i dont know what to do... what is wrong with this actually?

and second problem.. i have creative Audigy Value card installed...i usually set it to 5.1 speakers... but the application that has been installed by Win update... i.e. Creative Audio Control Panel.. always crash on startup.. i dont even had the chance to adjust it or do anything with it... i download from the official web also the same... *sigh*

A:[SOLVED] USB not detcted.. pendrives external hdd etc

okay what is weird... i can use the USB while in safe mode... and at the moment.. when i go to manage... the usb is listed healthy... but when i want to assign letters it says "The system cannot find the file specified"

Read other 7 answers
RELEVANCY SCORE 45.6

Hi all! Not something that hinders my daily life but why Windows7 forgets about the name of the renamed pendrives and external drives? I give them names so that I can know their content without opening them such as
"Films" or "Pix" or "Softwares". They were fine like this during a year or more and now from one day to the other everything lost its name and became E:, F: etc. Notably, these peripherals are connected the same way: the same cable to the same USB port. I re-renamed them again yesterday but they went back to E:, F: once again. That is so stupid.

A:Windows7 forgets the name of external drivers/ pendrives

Hello akofalvi,

This normally happens when other drives/applications starts to reserve specific drive letters/path. For instance Daemon Tools (Which mounts installation images) could reserve drive letters G-H, and thus causing your other ones to change letters and therefor loose any name given.

You should try to set them to something way back in the dictionary, like Z-X:

Go to Start > Search.
Type "diskmgmt.msc" > Hit Enter.
Rightclick your drives > Change drive letters/path.

Read other 1 answers
RELEVANCY SCORE 45.2

My usb 3.0 slots are not recognizing usb 2.0 mass storage stuff and neither any usb cables..It also does not recognizes webcam or keyboard adapter..What shall i do?
I have updated chipset,usb and bios drivers but no help..

A:USB 3.0 ports do not recognize 2.0 stuff like pendrives,iphone charger

This is what I do when I suffer these types of problem, which is often by the way, and I have not found a correct way of fixing so it is temporarily at best.

I go to Device Manager, then to Universal Serial Bus Controllers and I start uninstalling the Generic USB Hubs and then the other hubs, hoping not to nuke my mouse, if I don't then I go to the Action Tab and click on Scan for Hardware changes and it will rearrange the usb drivers and IRQs in hopes that they do not clash with each other. If it does nuke the mouse then I manually restart the PC and hope that it will solve the issue once I am back at the desktop.

There is no damage done to the PC, at least I have not seen any real damage but until I find a better way, this is what I have to deal with.

Read other 1 answers
RELEVANCY SCORE 26.4

I have a Win XP desktop which had problems with the hdd. The hdd and disk drive were connected to the same IDE bus(the motherboard only has one), the disk set as slave, the hdd as master. The computer worked fine except for errors with the hdd. I purchased a new hdd, and copied all contents of the old hard disk over using acronis migrate easy. In order to do this, I had to disconnect the disk drive, and connect the new hard drive in its place. The cloning process went smoothly and when I disconnected the old hard drive, I was able to boot into the new one. Everything worked fine, but when I connected the disk drive and rebooted, I got the error message:
"reboot and select proper boot device
or insert boot media in selected boot device"
How do I fix this?
 

A:Solved: "reboot and select proper boot device or insert boot media in selected boot d

Read other 11 answers
RELEVANCY SCORE 26.4

Computer won't boot "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key." everytime i turn on the computer a black screen pop up saying
"Intel UNDI, PXE-2.1 (build 083)
Copyright (c) 1997-2000 Intel Corporation
This product is covered by one or more of the following patents:
US5,307,459, US5,434,872, US5,732,094, US6,570,884, US^,115,776 and
US6,327,625
Realtek PCIe FE Family Controller Series v1.27 (10/31/11)
PXE-E61: Media Test Failure, Check Cable
PXE-M0F: Exiting PXE Rom.
Reboot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key."
i can't even do anything on the computer and when trying to use the media disk it stays on a black screen.

Read other answers
RELEVANCY SCORE 26.4

Hey guys,
 
just reformatted my PC with Windows XP x64 bit edition,
 
After putting in my Mobo CD and installing the necessary drivers,
 
I restarted and got this message:
 
Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key
 
 
 
I looked around the internet for a bit, and most said to change the boot sequence in the BIOS to the primary drive,
it was already set to the primary drive, so I disabled the 2nd and 3rd boot choices.
 
 
But low and behold, I still got the message.
Although, a couple times, I was able to get to Windows.
Then when I restart, I get the message again.
 
 
So I'm not really sure what to do.
 
 
Thanks to anyone who would like to help.

A:Reboot and Select proper Boot device or Insert Boot Media in selected Boot devic

First...system manufacturer and model?
 
Just guessing...but I would disconnect the hard drive and reconnect it...then see if the BIOS properly recognizes the hard drive.  If it does, then I would try to boot.
 
I would also enable all boot options in the BIOS...and try to boot from an option other than the hard drive, if you have a bootable XP CD, bootable USB, etc.  Save all changes made by hitting F10.
 
If the system can boot from an alternate option but not from the HD...it's probably a hard drive situation.
 
If the BIOS doesn't cannot retain the changed settings or you start getting other hardware errors...my guess would be CMOS battery needs replacement.
 
Louis

Read other 1 answers
RELEVANCY SCORE 26.4

Hi  I have problem in my laptop lenovo yoga 520  "Default Boot Device Missing or boot failedInsert recovery media and hit any key Then select boot manager to choose a new boot device to boot or recovery media."  Cannot start windows 10  Thank you

Read other answers
RELEVANCY SCORE 26.4

Hello,

I have dual boot in my laptop with Ubuntnu 14.04 LTS and Windows 7 Home Premium 64 bit. Today after working on Ubuntu I restarted and switched to Windows and as soon as it logged in I noticed the battery was 0%. I thought maybe it was some kind of glitch or something (silly me!) so I just pulled the power supply and the laptop abruptly turned off. My laptop battery is completely dead now...won't charge at all and after that incident when I tried to log back into Windows it showed this error:

Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:

1.Insert your Windows installation disc and restart the computer.
2.Choose your language settings, and then click "Next".
3.Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

Status: 0xc000000f

Info: The boot selection failed because a required device is inaccessible.

I don't have an installation disc, I tried pressing F8 and none of the options there helped. Ubuntu still works totally fine though. So I'm guessing it is not some hard drive crash and my data are fine in Windows but I just can't boot into it! Please Help!!

A:Dual Boot: Win7: Boot Manager Status: 0xc000000f boot selection failed

Are you using GRUB2 as bootmanager and is windows one of the options? Or do you start ubuntu from the win7 boot menu?

Read other 9 answers
RELEVANCY SCORE 26.4

So basically, my computer has been doing this for awhile:

I will be running my computer, and it will randomly say

"Reboot and select a proper boot device or insert boot media in selected boot device"
or something similar to that.

It used to only do it about once every week, but now it's up to almost every day. I will post the
____________________________________
? OS - Windows 7? x64 ? What was original installed OS on system? Windows 7 ? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? pre installed ? Age of system (hardware) ~2 years ? Age of OS installation - have you re-installed the OS? ~ 2 years ? CPU ? Video Card NVIDIA? GeForce? GTX 460M 1.5GB GDDR5 VRAM ? MotherBoard ? Power Supply - brand & wattage - not that relevant ? System Manufacturer Asus ? Exact model number (if laptop, check label on bottom) ASUS - Notebooks- ASUS G73Jw
________________________

I will post the BSOD File Collection app as soon as it is ready in the morning. It's been waiting for auto run to complete for a half hour now and it's 3:50 am...

A:Reboot and select a proper boot device or insert boot media in selected boot

I finished getting the other file, but it is 6 mb, which means it's too big to upload. So I guess I can email it to you if you want it, or if you can provide me another way of attaching it I could do that too.

Read other 2 answers
RELEVANCY SCORE 26.4

Hey guys,
Thanks ahead of time for the help. I can honestly say I'm dumbfounded with this issue and would rather ask for help then hook up my master HD as a slave and force a reformat which would be my next step.

Anyways, here's the background on the issue.

Rig:
AMD Athlon 64 3700+ OC'd to 2.75ghz
Asus A8N SLI Deluxe Mobo
BFG Tech Nvidia 7800 GTOC x2 (SLI)
Dual Sata Hd's, both the 3gb/s connection. (750gb main/250gb Backup)
Sound Blaster XFI Fatal1ty sound card
Creative modem blaster v.92 dialup modem ( @ dialup)

A few days ago, not quite sure why, but when I booted the comp the graphics card proceeded to tweak out and basically looked like fuzz upon entering windows. Eventually after hard resetting it a few times it'd boot normal. Today, I was running Nvidia NTune utility to find a stable OC setup for my PCI bus and what not, and it rebooted as normal during the process. Graphics card tweaked again, so I did what I know to do and uninstalled/reinstalled the drivers for my 7800's. Seemingly fixed the problem. Rebooted and resumed the OC process and went to watch TV.

45 Minutes later I come back and my computer is rebooting itself constantly. Upon getting the the xp loading screen, it BSoD's and reboots.

So, I try and boot in safemode to uninstall/reinstall drivers yet again. When I press safemode, it begins loading basic drivers. When it gets to SPTD.sys it pauses, locks up, and reboots (no BSoD)

Next step, repair through XP installer di... Read more

A:[SOLVED] BSoD on standard boot, safe mode boot, and xp install disc boot

Update:

Well, a friend needed me to fix a design for him emergency status in Illustrator CS3, so I went to work troubleshooting.

All signs point to NTFS.sys being corrupt, etc. Which makes the drive unreadable, hence the reboots.

So, I snagged my dads IDE harddrive from his computer, hooked it up as master in my computer and it still gave me the BSoD. I then unhooked both of my Sata Hd's, and ran ONLY the IDE drive. This IDE drive is fine (i'm on it right now on my dads comp to write this). I try and boot my system off just his harddrive and it STILL gave me the BSoD.

Only difference is the BSoD is staying up now on normal boot so I can give you the error.

Error code is 0x0000007B? I believe.

But yeah, the computer is still unable to boot off a good HD even with the bad ones not hooked up.

Now I'm thinking a memory issue? or Video ram issue? Fried GPU/RAM?

AHHHHHH!!!!! i have no idea what to do. This is ridiculous. meanwhile my friend is screwed on his design for a t-shirt i told him i'd do.

Read other 12 answers
RELEVANCY SCORE 26.4

I'v have just bought a Dell Inspiron N5110 from car boot sale. This laptop turns on but will not get past the screen shown in the photo. Hard drive has been removed, all other parts are still in place. The guy who sold this laptop, had the hard drive removed.
Specs:
Intel Core i5 Processor (unsure of exact speed or generation because unable to access desktop due to error).
4GB RAM
15" Screen
HDMI, USB, Ethernet ports, and SD card reader
Questions:
 
1. What does this error mean:
Reboot and Select proper Boot device or insert boot media in selected boot device and press any key.
 
2. I want to install a 1TB 2.5" hard drive. If yes, which Western Digital hard drive should I go for?
 
3. Curently it has 4GB RAM installed. Want to install 8GB RAM to optimise performance. please tell me which make/brand should I go for?
 
4. I also have a Dell recovery operating system windows 7 home premium from another Dell Laptop. Will this Dell recovery opertaing system work and install Windows 7 using the key located underneath the laptop near the battery area of the Dell Inspiron N5110?
 
Thanks in advance!!

A:Error message at boot up: Reboot and Select proper Boot device or insert boot...

The first thing you are going to need to do is to purchase and install a hdd.
 
Newegg has a Western Digital 1TB hdd for $69.99 plus tax and shipping. 
 
You will then need to install Windows Home Premium 64-bit.  You can download a ISO image of your operating system here.
 
You will need to burn the ISO image to a DVD to create a bootable installation disc.  
 
How to burn ISO image using Windows Burn Disk Image.
 
Notice:  This applies only to Windows 7 and Windows 8, earlier versions do not have this.  
 
1.  Place a blank CD or DVD in the tray of your optical drive and close the tray.
 
2.  After you have downloaded the ISO image you want to burn right click on the Start orb, then choose Windows Explorer.
 
3.  When Explorer opens click on Downloads in the left pane.  Scroll down till you find the ISO file you want and double click on it.  Click on Burn Disk Image.
 
4.  In the image below you will see Disk burner:, this should be set to the optical drive you want to use.  Click on Verify disc after burning if you want to Windows to verity the disc image after burn.  Click on burn.
 

 
5.  In the image below you can see that the green progress bar, when the image is finished burning the bar will be filled.
 

 
6.  After the image has completed being burned click on Close.
 
If you need a tutorial for installing the operating sy... Read more

Read other 7 answers
RELEVANCY SCORE 26.4

recently i woke up, went in my computer room, and saw the screen was black with the following message displayed
"Reboot and select proper boot device or insert boot media in selected boot device"

so i rebooted and windows started fine

couple days later same thing happened, only it won't reboot, just comes back to the same screen

the hard drive is the only thing showing bios (samsung hdd), but when i hook up as slave drive to another comp, it only shows the usb/sata adapter, not the drive, also noticed the dreaded hard drive clicking noise, i really don't want to send to a data recovery company due to cost, but my family photos are on there and i have no backups, are there any other options?
 

Read other answers
RELEVANCY SCORE 26

Computer: Dell Inspiron 1525, 320 GB HD with about 2 GB of free space left, 4 MB memory, running Vista Home Premium 32-Bit, SP1, updates current. Just lately, booting from off, Windows will not load, but instead gives me a \Boot\BCD error (0xc00000f)--an error occurred while attempting to read the boot configuration data. I have repaired this error with my Dell-supplied OS disc repeatedly, and each time I turn off the computer it has the same error at startup. I have read that I may have to rebuild the BCD, but I don't know how to do that. Before I check with Dell, who I suspect will just tell me to reload Windows, I need to know how approach fixing my boot configuration data. The computer has had no new software installations, just routine Windows and Trend Micro Internet Security updates, I checked the disc for errors, and a few files were missing or incorrect, and defragmentation has also been performed routinely. Dell PC checkup finds no issues. How should I proceed?

A:Boot\BCD error reading boot configuration data when starting from cold boot

Try this hard drive diagnostic procedure: http://usasma.vox.com/library/post/b...agnostics.html

Repeated errors on a hard drive usually indicate an impending failure. I'd backup your stuff as soon as possible.

Read other 5 answers
RELEVANCY SCORE 25.6

Hello Lenovo Forum!This is driving me mad. I bought a SATA-to-USB3 Adapter to connect my SSD and HDD from my old computer and boot from them (I want to use the Linux on it). Yet I can't figure out how to do that. Secure Boot is off, Legacy Boot is on and yet - everytime I choose the drive in the boot menu, the screen goes black, there is a short drive access, and then I'm back at the boot device menu. I don't really know what to try now. Reimaging like most other threads here suggest doesn't help in that case because it's not a simple installation medium. What I tried aswell: Attaching the Adapter via a USB2-hub to check if there might be an issue with USB3 support. When plugged into my friends X230, both drives boot up perfectly fine and he can use them just fine. Any kind of help is highly appreciated.Kind regards,Iriya EDIT: Here the BIOS Options which I think are somewhat useful:Config TabUSB UEFI BIOS Support - Enabled (Tried turning it off, didn't helpSecurity TabSecure Boot: DisabledPlatform Mode: User ModeSecure Boot Mode: Standard ModeStartup TabUEFI/Legacy Boot: BothUEFI/Legacy Boot Priority: Legacy FirstBoot Mode: QuickRestart TabOS Optimized Defaults: Disabled

Read other answers
RELEVANCY SCORE 25.6

I have a dual boot installation with Windows XP and Windows 7 on the same drive with two partitions. Both work just fine.

However most times that I boot from a cold boot, I get NO Boot options menu, just a blank screen and the hard drive light glows red, but it doesn't really seem to be doing anything.

If I press the reset switch, everything works just fine, the computer reboots, I get a boot options menu for selecting the operating system and either one boots up just fine.

If I shutdown the machine for any period of time, I'll get the blank screen until I do a hard reset.

It seems like the boot loader is not finding the ini file with the options, but only on a cold boot? Any suggestions would be appreciated.
 

A:Windows 7 Dual Boot No Boot Options Menu on Cold Boot

Long shot, but could it possibly be a dead CMOS battery?
 

Read other 3 answers
RELEVANCY SCORE 25.2

And I only see that BSOD when I disable automatic restart. The stop code is 0x000000ED (0x86403130,0xc000009c,0x00000000,0x00000000). I get the blue screen (momentarily) on all of the other F8 options.

When I boot using the Vista disk I get the msg 'Windows is loading files...', then I get what looks like the bottom part of the XP splash screen - the little bar with the green dots moving from left to right (was that part of the Vista start, as well?), then eventually the screen goes black..... and stays that way. Although after about 30 seconds the mouse pointer does show up - and its moveable. And the keyboard lights up properly on Caps Lock and Num Lock. But nothing else.

I did try booting off an old XP disk, and it did take me to a place where I could delete the partition.

Should I try that, and then try the Vista disk again, or should I just go ahead and install XP (although I would have that pesky product key to deal with)?

I somehow feel that if I could only get to a C: prompt I could do a fixboot

A:Vista will not boot - Unmountable Boot Volume - Won't Boot from Disk Either

and I'm not talking about a good answer. ANY response at all would have been appreciated.

My original post, titled Vista will not boot - Unmountable Boot Volume - Won't Boot from Disk Either seemed like it would be the kind of posting that would have elicited some response - Can't boot normally, in safe mode, or last good configuration. AND, can't boot from a genuine Microsoft Vista Home Basic disk.

But nothing.....

So I inserted an old HP Windows XP OS CD into the machine, and booted to the recovery center, where I selected to install XP. I formatted the drive, and then ejected the disk. I then put the Vista disk in, and booted from it.

Presto, it worked. This time it actually took me to the Vista Repair / Install page.

I deleted the partition, entered the product key and re installed Vista.

It is now working beautifully.

Thanks for your help.

Read other 1 answers
RELEVANCY SCORE 25.2

After reading through lots and lots of posts and tutorials, I'm still a little confused. I worked for a carpenter one summer when I was a kid and he stressed the philosophy of measuring twice and cutting once as a rule to live by. So, before I fire up my saw, I thought I would seek a little clarification. I expect to get my new 60GB Intel 520 SSD delivered today and here's what I would like to do.

First, here's my system Info:

ASUS P8Z77-V/Pro/Thunderbolt with i7 3770 (non-K) and 2x4GB Trident X Series 2400 RAM
60GB Intel 520 SSD
500GB WD HDD
SW DVD

Okay. I had Windows 7 Home Premium installed on the HDD, but in anticipation of using the new SSD as the boot drive, I cleaned it with Diskpart>clean all. Now, I would like to do a fresh install on the SSD from the DVD drive and use the following xml (from Keri), that I now have on a USB, to move the User and program data to the HDD.






Quote:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64"
publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<FolderLocations&... Read more

A:Boot Priority & Boot Device Control for New SSD as boot drive

We link to tutorials so you'll have illustrated steps for a specific suggestions. It's one of the main reasons we are the top tech forum on the web.

I would not move User folders as we've had feedback indicating unintended consequences. Much easier to copy your User folders to the HD data partition, rightclick each to add to the related Library - Include a Folder - Windows 7 Forums. Keep the emptied C user folder in Library so you can see if anything lands there and drag it over to data drive in same window.

Install most-used programs to C, if space gets too tight uninstall and reinstall lesser used programs to data drive.

To save space you can set paging file to 2gb: Change Virtual Memory Paging File.
If you don't rely on it you can turn off Hibernate in Power Options, though it is perfected in Win7. These are trade-offs that must be decided with a small SSD.

Here are customized install steps for you:

Unplug all other HD's and peripherals,

Check for a BIOS update. If none boot into BIOS setup, reset to defaults, save changes. Next if an EFI BIOS, enable Legacy BIOS, set DVD drive first to boot, SSD second. Then set SATA controller to AHCI. Save changes and Exit.

Then boot into installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10 to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirmi... Read more

Read other 7 answers
RELEVANCY SCORE 24.8

Hello,
I am having problems with direct booting into Windows 8 installed into a VHDX file.
This is a four-partition UEFI boot on a GPT drive. EFI files are residing on a second partition of disk 0 (the ESP partition) in the EFI folder. The boot virtual disk is residing on the fourth partition of that disk 0.
When I turn on the PC, it shows black screen after the BIOS POST screen. No Windows 8 boot menu, no other information is displayed. However, if I press Shift+F12 (or F12) to start Dell BIOS Boot Menu and choose Windows Boot Manager from the UEFI part of
the boot menu, Windows 8 starts to boot without difficulties.
How do I make Windows to boot automatically without having to select Windows Boot Manager in DELL BIOS boot menu?
I believe I messed up with boot sector somehow... What needs to be fixed provided that Windows 8 will boot into VHDX file?
Thank you.

Well this is the world we live in And these are the hands we're given...

Read other answers
RELEVANCY SCORE 24.8

I have an XPS 8500 that will not boot normally. It was running fine and all of a sudden came up with the message "Reboot and select proper boot device or insert boot media in selected boot device and press any key". I have figured out if I go into BIOS first the PC will boot up but is very slow in doing so. I googled the issue and found something telling me to default the BIOS. I did this and it booted once. Trying to decide if the HD is out. I ran diagnostics and it does not see a HD. But if that's the case why does it even boot after going into BIOS. I am running Windows 10 Pro. I updated Windows 7 Pro. I am a strong believer in Dell and find it hard to believe that a HD would go out after only 4 years. Any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 24.8

Usually when I see this error its the Power supply, or and bios issue. Anyone have any Ideas. I can actually boot to windows but the computer shuts down in about 20 min and give that error. I am use to seeing that when it will not start, but it starts and stays on for a bit but not long enough to save stuff. I even tried to reload it and it wouldn't let me. I am figuring its the hard drive. Any Ideas

"reboot and select proper boot device. Or insert boot media in selected boot device and press any key.
 

A:"reboot and select proper boot device. Or insert boot media in selected boot device

First of all, no one has any idea what we are attempting to diagnose. Post ALL of your exact system specs; ie exact mb, exact ram, exact video card, etc, etc. If this is a big box system, then post the exact brand and model# If you have a service tag# post that as well.

Note do not post "500W pw supply" Post the exact brand and model# Do that for all of your parts.
 

Read other 3 answers
RELEVANCY SCORE 24.8

Hi There!
I am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!
I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least. So my boot sequence is as follows:
Boot 1: (Hard drive)
Boot 2: CD/DVD: PM-ATAPI DV
Boot 3: USB: Generic-Compa
Boot 4: Lan

I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu. But I truly have no idea how to change that. Which brings me here.
If anyone can offer any help to this, I would greatly appreciate it.

A:Reboot and select proper boot device or insert boot media in selected boot device an press a key...

HiYou will have to give a little more information.What is the make and model of the computer?If it isn't a brand name what make and model of the motherboard.Or you can post a Speccy that will give that information.[ Go to Piriform's website, and click the big button.

Next, click Download from Piriform.com (the FileHippo link requires an extra click). Or if you want to use a portable version of Speccy (which doesn't require installation), click the builds page link and download the portable version.

You will now be asked where you want to save the file. The best place to put it is the Desktop, as it will be easy to find later.
After the file finishes downloading, you are ready to run Speccy. If you downloaded the installer, simply double-click on it and follow the prompts until installation is complete. If you downloaded the portable version, you will need to unzip it before use. Right-click the ZIP file and click Extract all. Click Next. Open up the extracted folder and double-click on Speccy.
Once inside Speccy, it will look similar to this (with your computer's specifications, of course):
Now, at the top, click File > Publish Snapshot

You will see the following prompt:
Click Yes > then Copy to Clipboard

Now, once you are back in the forum topic you are posting in, click the button. Right-click in the empty space of the Reply box and click Paste. Then, click Add Reply below the Reply box.

Congrats! You have just posted your specs!... Read more

Read other 7 answers
RELEVANCY SCORE 24.4

I'm having a problem with booting my laptop - but only when cold-booting.

Never heard about this problem before. I can reboot just fine, and if i acces the BIOS and just go straight on exiting, not changing anything - it too boots windows normally without any hitches.

How is booting different from cold-boot to rebooting or through BIOS? I've been toying around with EFI boots, but everything [should be] reverted and i used my windows disc to repair the boot sequence. After the BIOS splash it just lingers and the "starting windows" gui doesnt appear.

Edit and edit2: I've now tried for a couple of times to let it sit, and it does boot up after about 4 minutes consistently. It goes like this:
I press power on. After,
3 seconds the BIOS splash comes on.
7 seconds the screen goes black.
4 min 0 seconds the screen turns off, then immediately turns on again with a black screen.
4 min 3 seconds the BIOS splash reappears.
4 min 7 seconds the "windows starting" gui comes on.
4 min 25 secs windows is booted up and responsive.

So the Black screen is consistently just about 3 minutes and 53 seconds. All BIOS settings are properly set to boot from HDD. No external HDDs or FDDs connected. Even removed the excess drive letter assignments in windows to be safe.
Satas in AHCI for the OS-SSD (and a spindle for storage). Booting from spindle drive is disabled in BIOS.

Its a brand new machine, and it worked properly when i formatted it to begin with and in... Read more

A:Interesting boot problem... Cold-boot vs hot-boot

Give us some info about the computer and which operating system.
 

Read other 2 answers
RELEVANCY SCORE 24.4

Hi, Trying to boot my T550 from a Linux (Zorin) installation DVD. Can read the DVD in windows explorer. - it looks ok Have disabled Secure Boot and switched fro UEFI to legacy. Used f12 to select the DVD drive to boot but all I get is a black screen with 3 symbols. The 1st looks like a ruler, then =, then a stick figure in a circle. Any ideas? Liz

Read other answers
RELEVANCY SCORE 24.4

Hey guys, quick question for you.. Now my friend has this error: "Reboot and select proper boot device or insert boot media in selected boot device and press any key?" and I've been trying to help him for a while with it. He told me he took out his hard drive and RAM for some reason, then a little bit later put them back in.

And now all of a sudden hes getting this error. He has an HP e9300z computer and I guess has a gaming keyboard and mouse plugged in, which also don't work. So he can't get into his bios to check boot order. He also doesn't have access to a linux live CD or a repair disk CD. He is using windows 7 as well.

So if anyone has any ideas or had this happen to them, any info would be awesome!!

A:Reboot and select proper boot device or insert boot media in selected boot device...

He may need to connect a PS/2 keyboard to get into the BIOS Setup (assuming his PC has a pair of PS/2 ports for mouse & keyboard). Some computers don't respond to USB keyboard input for BIOS access. Mine is like that and it's a new PC - good job I kept my old PS/2 keyboard because they are difficult to find these days.

Read other 2 answers
RELEVANCY SCORE 24.4

I have absolutely no idea what I'm doing. I tried to get my desktop computer set up for the school year, but found myself with a Blue Screen Error every time I would turn it on. I had this problem on my laptop just weeks earlier, and when I turned it into the shop, they informed me that it was caused by corrupted RAM. So, instead of wanting to pay another $300 to get the desktop fixed, I chose to take out the RAM myself. Bad idea...

For some reason, the RAM appeared to be melted or scratched away a little bit at the bottom (gold part that goes into the slot). So I took that RAM out. Only now when I turn on the computer, it gives me a screen saying "reboot and select proper boot device or insert boot media in selected boot device". I go into the Boot Menu, and it gives me two options, both bringing me back to the same "reboot and select proper boot device or insert boot media in selected boot device" message. I tried taking out a RAM drive from a different desktop computer and putting it into the one I'm trying to fix, but then the monitor wouldn't read the computer being on. I switched monitors, but to no avail. I switched RAMs from other computers, but that doesn't work either. I can't afford to take this into the shop or buy new parts for it, but I really need it for school. I don't even care about it running slower or files on their disappearing forever. I just want my computer to run.

So how does a person with no ski... Read more

A:Reboot and select proper boot device or insert boot media in selected boot device?

I just want to be clear here (point form is sometimes good)

PC Bluescreens
Removed Ram (looks to be physically faulty, gold plate scratched off)
Turned on computer (not sure if you re-inserted the original Ram here again)
Now cannot find HardDrive boot sector
Tried Ram from another (unknown) computer (Note: Ram specs may be incorrect)
Would not POST (Power On Self Test)
Put the original Ram back in
From here, I don't know what's happening, probably not Booting again (ie your long heading)

This is what I recommend (even though I'm still a little unsure where your at!)

Remove the Ram (By the way 1 or 2 Ram Cards?)
Blow out (either compressed air in a can, or just using your breath) the Ram slots
Re-insert the Ram (you usually just need one in there to test with) Note: They click in
Unplug the cables going to your HardDrive (HardDrive end and Motherboard end)
Re-insert the HardDrive data cable (securely)
Do the same for the HardDrive Power Connector (pull it out, then push it in with a little force)
Now do the same for the CD/DVD Drive data and power cables (you can even just leave these cables fully out)

Turn on !

Did it work?
 

Read other 9 answers
RELEVANCY SCORE 24.4

Hi everyone,

I've been encountering a problem where upon booting I receive the following message: "Reboot and select proper boot device or insert boot media in selected boot device."

To provide more context, the computer that is showing this problem recently received a hardware upgrade. I figured out that my PSU was insufficient for some of my current tasks, and decided to upgrade my power supply. Since I decided to do so, I thought of upgrading the video card and the RAM (since it was a rather old computer as well).

Upon installation, I received the following message. The OS is Windows 7.

Thanks in advance for any tips.

Best,
KnightessKana

A:Reboot and select proper boot device or insert boot media in selected boot device

Boot into the BIOS, and check your boot devices. It maybe trying to boot from a USB device, or CD.

To enter the BIOS, reboot system then press either the Delete key, or maybe the F2 you will see a message about which key to "enter setup"

Read other 4 answers
RELEVANCY SCORE 24.4

I've come across this error while re-installing Windows 7. I've wiped the drive and started the installation and while installing I got an error stating that there was a required driver missing. When I restarted, I received this error "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key. I've reset the CMOS and checked the cables and drives but still the same issue. Neither my DVD drive or HDD are showing up in the BIOS so I can't boot to the Windows 7 disc to get to the command prompt. I was wondering if I need to replace my HD or would that just be a waste of my time and money?

I have the HP Pavilion p6115y

8GB Ram
750 GB SATA HD
AMD Athlon x2

Any feedback will be helpful

A:Reboot and Select proper Boot device or Insert Boot Media in selected Boot Device

Welcome to TSF

That message is indicating that it does not see the hard dive to boot to it. Odd the BIOS doesn't see the hard drive or the optical drive. I'm assuming Windows 7 ran successfully prior to the wipe and reinstall? Can I ask why you reformatted in the first place? What driver did it say was missing? Did the install halt at that point requiring a reboot or did you just reboot because of the missing driver message? Make sure you have no USB devices attached to the system as it may be trying to boot to USB device. Also you may want to change boot order in BIOS

Read other 1 answers
RELEVANCY SCORE 24.4

I'm doing an upgrade on a computer with a new: PSU/Mobo/RAM/CPU but I get this error upon start up. I've verified that the IDE cables are plugged in correctly and I've tried all the jumper settings on the hard drive but no devices show up in the BIOS. I've set the boot order as CD/DVD, Floppy, Hard drive. I've tried two sets of IDE cables but to no avail. Any other solutions to this problem?
 

A:reboot and select proper boot device, or insert boot media in selected boot device

Make certain your IDE cables are not just plugged in correctly but their also correctly placed. The side of the cable with the color strip is generally closest to the PSU plug up.
The boot order with your OS in your CD drive on boot should be CD - HD and then Floppy. Keep us up to date as to what's happening. There's a lot of folks willing to help. Jazz
I should ask what settings you've left your HDD on with the jumpers? What setting is you CD on with the jumpers?
 

Read other 3 answers
RELEVANCY SCORE 24.4

Now I know this topic has already been covered a while ago on here and I read it from beginning to end and tried everything and it did not fix my issues. So my computer got hit by lighting through the phone line. I have replaced the power supply and the motherboard and cpu which came as a unit. And when I boot up it finds my HDD and both my Cd-Roms but then I get "reboot and select proper boot device or insert boot media in selected boot device." I ran Knoppix and looked at the hard drive and everything is still on there. So I am guessing the problem is in the Bios but I have no idea where to go from here.

Here is what I have going:
Elitegroup Goal3+ Motherboard
AMD Athlon Sempron
Master Drive - Hitachi 2500GB HDD
CD Drive 1 - Pioneer DVD-R/RW
CD Drive 2 - Samsung CD-R/RW SW
Generic Floppy Drive 3.5"
1024MB Kingston DDR Ram

Thanks in advance for any help!
 

A:Reboot and select proper boot device or insert boot media in selected boot device

When you say you "tried everything," what did you try? Give us a clue regarding your prior efforts so we don't waste time suggesting the same old thing again.
 

Read other 8 answers
RELEVANCY SCORE 24.4

So i am getting this error every time i try to boot up my PC, i use to be able to just go into my bios menu and boot it from there to bypass this error now when i try to do that i get stuck at the "Starting Windows" screen either freezing there or looping back to my ASRock menu. I am a pretty big noob when it comes to PC so was wondering if anyone could help me please?
 

A:Reboot and select proper boot device or insert boot media in selected boot device and

there is a good chance the harddrive has taken a dive
looks like u had plenty of "warnings"
go into bios and set "harddrive" as 1st boot device
if u get the same message....... replace harddrive
also go inside of tower and make sure all cables on the drive are tight & snug
 

Read other 1 answers
RELEVANCY SCORE 24.4

I have upgraded the RAM of my pc last friday. I have added another 1GB of DDR400 and everything seems working fine. But this morning, when my brother just informed me. that when he tried to turn on our pc and errors come up:

"Reboot and select proper boot device or insert boot media in selected boot device"

I have not had this PC for more than a year now since I bought this from my previous employer.

Here are the specs of my pc:

HP Compaq dx2000 MT:
-Intel Pentium 4
-256 MB RAM (currently upgraded and added 1GB RAM)
-80 GB harddisk
-CDRW combo drive

I don't have WinXP CD.
Maybe interface cables may have become loose when I installed the RAM last friday?
I'm not really sure.. I'll have to check it, once I get back home..

A:Reboot and select proper boot device or insert boot media in selected boot device

Since you installed new ram and had no issues before that is where I would start, run Memtest. If it shows any faults whatsoever the ram has a problem. New items can fail during initial burn in, Memtest is free and has good approval ratings here and on other boards.Look for "free down load on the left" http://www.memtest86.com/

Read other 7 answers
RELEVANCY SCORE 24.4

I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got:

"reboot and select proper boot device
or insert boot media in selected boot device"

Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.

I have no idea how to solve this problem and don't have any of the recovery CD's!!!! I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.

I know this problem is often user specific so PLEASE PLEASE HELP ME!!!!
 

A:Reboot and select proper boot device or insert boot media in selected boot device

Read other 11 answers
RELEVANCY SCORE 24.4

hello ,
so i have this 2 weeks old acer predator pc that came with windows 8 on it. I didn't like windows 8 so i took the hard disk out and put it on my other pc to format it and to install windows 7. everything worked fine windows 7 was installed . I moved it back to the acer and now i have the boot problem . i tried to set it to boot form hard drive but i still have the same problem , i tried to put my other hard drive which is working, but still the same problem. i can see in the bios that there is a hard drive ( AHCI PORT 0 : WDC then the serial number ) anyone can help ???
and sorry for my bad English .
 

A:Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and

you cannot install windows on one machine and then move the drive to another machine

it looks for the system it was installed on and then when it does not find it ,it stops dead

you need to install it in the machine you are going to use it on
 

Read other 1 answers
RELEVANCY SCORE 24.4

Hi,

Today I went out and bought a WD1600JB 160GB hard drive. I installed the hard drive and it was recognized by the bios but not by windows. I went to the western digital website and downloaded the drivers to get windows to recognize the drive. Everything was working fine, I logged out of my windows user (I'm the only user, but I log out anyways). I came back several hours later and went to go log in. I was entering my correct password (i made sure) and it wasn't logging me in. This has happened a few times before, and everytime it was fixed by rebooting. I rebooted the computer properly, and after the BIOS load, where the windows XP loading bar should have come up, i got instead:

"reboot and select proper boot device
or insert boot media in selected boot device"

I have searched the internet for about an hour now, trying different jumper combinations (cable select on both HD's, my master on master and slave on slave) I have even removed my slave drive and tried different jumper settings with my master drive. I have plugged in different power supply cords, set BIOS priority to hard drive first. I took everything off the BIOS boot list except for the harddrive and still no go. I disconnected both HD's and attempted to boot from a CD drive and got the same message. Same with floppy drive. I restored BIOS settings to default and tried again with all of the above. Nothing has worked. I have ensured that power cables and IDE ca... Read more

A:Reboot and select proper boot device or insert boot media in selected boot device

I forgot to mention, my motherboard IS detecting Both my CD drives, both my HD's and my floppy drive.
 

Read other 18 answers
RELEVANCY SCORE 24.4

I just got a new power supply and video card. I unplugged my power supply and hooked up my new video card and power supply and then when I turn it on it says "Reboot and select proper boot device or insert boot media in selected boot device."

Im not 100% sure I even hooked up the power supply and video card right, just sayin'.

It does the same thing even if the video card isnt hooked up.
 

A:Reboot and select proper boot device or insert boot media in selected boot device

Check the connections to the hard drive and make sure they are still seated properly.
Go into the bios setup and make sure the hard drive is set as first boot device.
 

Read other 1 answers
RELEVANCY SCORE 24.4

The problem is that it won't boot up. After the intel screen loads it shows:

Fastrack... Bios Version 2.00 0.33... then
"Scanning IDE Drives" then it turns to "No Array is defined...
Press <Ctrl-F> to enter FastBuild(tm) Utility or Press <Esc> to continue booting"

That's no problem but I can't press F8 or F2 or anything like that.

Pressing CTRL F is useless because i don't have that fast build thing, and when i press ESC or just wait a short while it turns to a black screen and all it shows is "Reboot and select proper boot device, or insert boot media in selected boot device and press any key" if i press any button it just shows that again but another row and it makes a click sound.

Problem happened after power shortage. No floppy discs or usb devices inserted at the moment. There could have been a CD in there but probably not.

Computer is custom built, don't know specs. is XP, built just for a vet (made by intravet).

Remember i CAN'T PRESS F8 or ANYTHING LIKE THAT!

A:Reboot and select proper boot device or insert boot media in selected boot device...

Guys,

I have similar problem that says: "Reboot and select proper boot device.... "
It's my small cute laptop and I have data on it that I don't want to lose.
If any help can save my data and keep use my laptop after repairing?

Or should I make a new thread for this?

THX,
Lya

Read other 1 answers