Over 1 million tech questions and answers.

I need Omni 120-1101 Bios Update

Q: I need Omni 120-1101 Bios Update

Hello, I need the bios update for my hp omni 120-1101es.i didn't found it anywhere and it's urgent. thanks in advance.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: I need Omni 120-1101 Bios Update

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 62.8

Hello, I am trying to boot my HP 1101 Mini, which has not been used for some time. It was left to us by a coworker who is no longer with the group, and there seems to be a BIOS password on it. There has to be some kind of default backup password, and I've found many posts about this issue, but none of the numbers given in the forums have worked for my situation. I have attached an image of the screen. I there anything I can do to get through this password screen and ultimately disable it?

A:HP Mini 1101 Bios Password

@JNeville? Enter   e9lof37o6i Use that code to go into the BIOS.Disable all passwords that are enabled.If asked for the CURRENT password use that code.If asked for NEW password just hit enter.If asked to VERIFY password just hit enter.Save and exit. REO

Read other 1 answers
RELEVANCY SCORE 62.8

Fatal error... System halt CNU937CCT8













Solved!

View Solution.

A:Hp mini 1101 Bios Password

Hi: Restart the PC, and enter this unlock passcode... e9lofxeeau

Read other 4 answers
RELEVANCY SCORE 62.8

Good Afternoon! Help... I have an old hp mini 1101 I totally forgotten the password. How can I reset it? code: CNU923B2KT thanks in advance...  

A:hp mini 1101 bios password

Please try this Password :  e9lo7fp7sa 3rd Character is Lower case L as in LIMA4th Character is  Lower case O  as in OSCAR and not Zero Steps to be followed:Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes.  Hope this helps, for any further queries reply to the post and feel free to join us again !!  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

Read other 1 answers
RELEVANCY SCORE 62.8

My hp mini 1101 boots up but wants a password after 3 times of failing to put password it gives me CNU937CBN6













Solved!

View Solution.

A:Hp mini 1101 bios password

So, did the unlock code work?

Read other 7 answers
RELEVANCY SCORE 62.8

I have a HP 1101 netbook.  I can't, for the life of me, remember the BIOS password on the device.  Any ideas of how access the netbook without too much effort.  Thanks.











Solved!
View Solution.

A:Fogot bios password in HP 1101

Please try this Password = e9lovv3ho8 Regards,K N R KI work on behalf of HP

Read other 9 answers
RELEVANCY SCORE 62

Hi Mr. David, Sir, I would also like to get some help resetting the Bios Password on my HP Mini 1101 s/nPersonal information edited by moderator)Thank you Sir, Reggie S











Solved!
View Solution.

A:HP Mini 1101 Bios Password Reset

Hi, Enter:      e9lofuqas8       ( 3rd character is a lower case L ) Regards, DP-K

Read other 10 answers
RELEVANCY SCORE 62

I've forgotten the password. How can I reset it?The pw is before bios so I can't boot from another source

A:hp compaq mini 1101 so BIOS password

you have created an expensive paper weight.





click Kudos to say thanks if I helped

Read other 9 answers
RELEVANCY SCORE 59.6

Please help i get the error reading from file message, apparently there isn't any solution mentioned for vista users.

A:Unable to Update Java - Error 1101

Hello hemants

Go here

Click the ?Download? button and you will soon get an option to verify your installation.

When you click on the ?Download? button a check is run to see which version you have. If you do not have the latest one the download will start and install it for you too. If you do have the latest you will be told so and no download will start.

If you have to install an update, after the EULA there is a page with
Google Toolbar and Google Desktop (I can`t remember if it is Google or Yahoo) checked for downloading, so watch for this and uncheck the boxes.

.

Read other 3 answers
RELEVANCY SCORE 56.4

Why is the result always "We were unable to retrieve the list of drivers for your product.  Please select the desired operating system and select ?Update? to try again" when I select the driver on the web site? No matter what the OS I choose. The result is always the same. Please update the web! Maybe the web is having bugs or error. I need the driver n BIOS for my Omni 120-1017l as fast as possible. Thanks

Read other answers
RELEVANCY SCORE 56

HelloHow 2 reset "cmos bios"  password on HP Omni 120-1106er Desktop PC  (all in one) Info i tried this  "jumper located close to the memory modules" not fore the bios,  I suppose. jumper  next to the cmos batarey dont have # on pins. " " My MB pic1 pic2

A:HP Omni 120-1106er cmos bios Password Reset

http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c02993109 Resetting BIOS passwordUse the following procedure to reset the BIOS password:Power off the computer.Note the location and orientation of the CMOS/Password jumper, as it will be placed back into the same position.Figure 4: Leon motherboard CMOS/Password jumpersRemove the CMOS/Password jumper from the motherboard.Power on the computer.Power off the computer.Return CMOS/Password jumper to its original position.Power on the computer, and immediately press F10. The BIOS password has been cleared Not helpful !

Read other 3 answers
RELEVANCY SCORE 54.8

I have Omni 200-5310 and NVIDIA GeForce G210 VGA adapter. When upgrading faced with the problem of replacing the video card on the NVIDIA Quadro K1100M according to the standard which should be suitable, is there any solutions? When enabled, NVIDIA Quadro K1100M screen is not responding, and the device emits 2 short and 1 long signal. Tried to find a new BIOS, but to no avail. Can tell me how to fix it or a suitable alternative graphics card performance, as all the other modules have improved. Intel Core i5-760 2.8GHz, Samsung 840 EVO SSD, 6 gb ddr3.Thank you.











Solved!
View Solution.

A:Help me! HP Omni 200-5310ru graphics update...

Hi there @victor282, May the Forums be with you!  It is a great place to find the help you need, from other users, HP experts, and other support personnel.  I understand that you are looking for some help related to a graphics card upgrade.  I am happy to help with this. When I searched your model, I found it is incomplete. That model has many regional versions; can you please post the 2 letter postscript to the model number, so I can be sure I am looking at the right one?  Sometimes, that can make a difference as to what is installed in the unit, although a common variation is going to be the wireless adapter, due to differeneces in the laws for wireless communications in different countries. Please let me know when you can.

Read other 5 answers
RELEVANCY SCORE 47.2

Hi I am trying to update BIOS  F 64.Rev A, but getting error messege can't update system bios file due c:\SWSetup\SP77971\ROM.CAB missing please help me,,,,,,

Read other answers
RELEVANCY SCORE 47.2

I'm a new owner of a Flex 4-1570 Ideapad. I have a critical update awaiting install, however the window popup says it is for the YOGA not the Flex. Thus, I have not installed it. My question is, should I install it? If not, how do I turn the notification off? Thanks! 

Read other answers
RELEVANCY SCORE 47.2

 I am receiving this message when I run sp76205: The system BIOS update file (c:\SWSetup\SP76205\hpqflash\ROM.CAB) is missing or corrupt. The system BIOS will not be updated." SP76205 was just released in June 2016 and I noticed other user are experiencing the same issue with it. Please provide a fix BIOS update or explain how to run this current update...

Read other answers
RELEVANCY SCORE 47.2

Hello to the BleepingComputer community,First of all I'm sorry I haven't finished some of the steps from the Preparation Guide. It's because these steps require a reboot (e.g. Step 6: Disable your CD Emulation Software - DeFogger will ask me to reboot the machine), and I have a bad feeling about the question if it is safe to reboot in my situation: I'm not sure if I have a type of malware which is ready to infect the BIOS - if it is so, then it could infect it much easier during the reboot process.- If there is a good way to find out what is the problem (and fix the BIOS threat part if it really is present) without rebooting / shutting down this PC, or at least without booting from this hard drive (which I feel is probably infected), then please tell me what should I do.- If you know a place / forum where I can get a specialized help for this (seemingly BIOS-malware related) situation, please tell me where I could go.- If there is no way to move forward, I'll go ahead and risk the reboot, and follow the other steps (steps 6 to 10) in the Preparation Guide, no problem.I kindly ask you to please read below the details of the problem as it occured to me, and the things I have tried so far.The PC is AMD Athlon 64 X2 Dual Core BE-2350 2.1GHz, Motherboard Biostar TA690G AM2 (with AWARD BIOS), 4GB RAM, 200GB SATA HDD, and an ASUS EAH4870 card added a few years ago.It's with WinXP SP3, AVG Free 2012, (standard) Windows Firewall, and it's behind a router.I ... Read more

A:BIOS virus/rootkit? - Unknown threat by AVG - "Bios Update\Award" folders, BS_Flash.sys, BIOS.sys and a dozen of m...

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. Click the Watch This Topic button at the top on the right.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 19 answers
RELEVANCY SCORE 46

My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers, I was told to stay away from this.

Thanks,
Jim

A:Samsung Bios software update for bios,update fails

Are you getting a direct link from the notification update? Can you post the link/site next time?

Read other 3 answers
RELEVANCY SCORE 44.8

My hp mini needs the current password but i don't know it.

A:Hp mini 1101

@awitholt98? Enter:    e9lofgu44g    ( 3rd character is a lower case L ) Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 44.8

My hp mini 1101 boots up but wants a password after 3 times of failing to put password it gives me CNU937CBN6

A:Hp mini 1101

Hi: Restart the PC and see if entering this unlock passcode works... e9lofxep9g

Read other 1 answers
RELEVANCY SCORE 44.8

I have a problem with my hp mini 1101, its not starting and i can't access to BIOS. Someone can help me?

Read other answers
RELEVANCY SCORE 44.4

Hi, my zonealarm keeps reporting that im infected by notavirus.win32.pskill.1101 and cant repair some of them.have ran spybot which finds nothing and have run ccleaner.i will post my hjt log so someone can just check it pleaseLogfile of HijackThis v1.99.1Scan saved at 22:11:41, on 04/03/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16414)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\system32\ZoneLabs\avsys\ScanningProcess.exeC:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exeC:\WINDOWS\system32\ZoneLabs\avsys\ScanningProcess.exeC:\WINDOWS\Explorer.EXEC:\Program Files\SiteAdvisor\5248\SAService.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\Zone Labs\ZoneAlarm\zlclient.exeC:\Program Files\SiteAdvisor\5248\SiteAdv.exeC:\Program Files\btbb_wcm\McciTrayApp.exeC:\Program Files\BT Broadband\Help\bin\mpbtn.exeC:\Program Files\BT Broadband\Help\bin\mad.exeC:\PR... Read more

A:Win32.pskill.1101

Hello and welcome to BC.Sorry for the delayed response. If you've not received help elsewhere and still need help, please post a fresh HijackThis log and I'll be happy to help you.

Read other 2 answers
RELEVANCY SCORE 44.4

I've been trying to install Windows 7 on my HP Mini 1101 netbook, but after trying several methods described via various sites it always ends up the same way in that the installer starts up ok but when it starts to Expand the Windows files it fails & says "setup.exe" is corrupt.
I'm pretty sure that nothing is wrong with the discs since both I've used at given points in time in the past to install Windows 7 on this laptop I'm using now. The flash drive I'm using is brand new (only opened this morning).
Anyone got any ideas to help me pull this off? Thanks.

A:Windows 7 on HP Mini 1101 via USB

Couple of Questions for you.
How did you get your install files onto your USB drive?
Is the DVD in good condition? (i.e. no scratches)
Is the DVD an actual Win7 Install Disc or a burned Copy?
You could try using IMGBurn to create an ISO of your Disc and than use the Windows7 USB/DVD Download Tool to transfer that image to either a Blank DVD or a USB Flash Drive. I would recommend the latter as it installs a lot faster. If this is something you've already done than let me know and we'll try something else.

Read other 3 answers
RELEVANCY SCORE 44.4

How to configure HP Mini 1101 to boot from USB

Read other answers
RELEVANCY SCORE 44

I have a problem with my HP mini 1101, it's not starting and i can't access to BIOS. Anyone can help me?

Read other answers
RELEVANCY SCORE 44

I have a HP Mini 1101 netbook which originally came with Windows XP Home. That OS suffered some hal.dll error, so I took the opportunity to upgrade it to Windows 7 Ultimate. I want(ed) to update the drivers but according to HP's support site for this netbook it only covers XP Home & Professional & Vista Business & Ultimate.
I was wondering if would be advisable (I personally don't think it is) to update using the Vista Ultimate drivers?

Thanks.

A:Updating HP Mini 1101 Drivers

hi srasc , update your drivers using vista ones in compatibility mode the vista drivers will work perfectly well in windows 7

Read other 4 answers
RELEVANCY SCORE 44

Running XP Professional Ed. 2003, SP3 & IE 7. Plenty of RAM & drive space. Drive frequently defragged by JKdefrag. Login has admin. rights. No other current issues than one below.

Thought I'd make sure I was running latest version of Java - maybe should have left alone. Tried installing Java, Version 6 Update 7 via online and received "Error 1101. Error reading from file: http://javadl-esd.sun.com/update/1.6..._07/sp1033.mst. Verify that the file exists and that you can access it." Download and ran installation file, same error.

Followed directons for Error 1101 at "http://java.com/en/download/help/6000070600.xml" to unregister, register Windows Installer Service but still same error. Next uninstalled all java entries in control panel, ran Ccleaner for files. Tried installing, still same error. Next exited antivirus, antispyware & stopped Windows defender. Tried install, same error.

Had hoped to try installation in safe mode - but computer acts as if my login there is not at amin. level, and I know it is. Have run out of possible solutions and now have no Java for IE - cripples viewing a number of sites I frequent, I.E. weather radar. Please help.

Read other answers
RELEVANCY SCORE 43.2

Causes my computer to just freeze and buzz. Its a brand new build everything works fine is good and that but this happens. The Freezes happen

This is what Event Viewer says

Audit events have been dropped by the transport. 0

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Eventlog" Guid="{fc65ddd8-d6ef-4962-83d5-6e5cfe9ce148}" />
<EventID>1101</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>101</Task>
<Opcode>0</Opcode>
<Keywords>0x4020000000000000</Keywords>
<TimeCreated SystemTime="2016-04-02T04:13:22.470549200Z" />
<EventRecordID>8625</EventRecordID>
<Correlation />
<Execution ProcessID="1180" ThreadID="1608" />
<Channel>Security</Channel>
<Computer>DESKTOP-8DH9Q1M</Computer>
<Security />
</System>
- <UserData>
- <AuditEventsDropped xmlns="http://manifests.microsoft.com/win/2004/08/windows/eventlog">
<Reason>0</Reason>
</AuditEventsDropped>
</UserData>
</Event>
 

Read other answers
RELEVANCY SCORE 42.8

Hi,
I've had a few problems with skipped files during an NTI backup so ran a Kaspersky scan and get 1 virus, 6 infected objects and the following scan result which reveals inctances of Infected: not-a-virus:RiskTool.Win32.PsKill.1101:

-------------------------------------------------------------------------------
KASPERSKY ONLINE SCANNER REPORT
Friday, September 21, 2007 10:48:44 PM
Operating System: Microsoft Windows XP Professional, Service Pack 2 (Build 2600)
Kaspersky Online Scanner version: 5.0.93.1
Kaspersky Anti-Virus database last update: 21/09/2007
Kaspersky Anti-Virus database records: 421823
-------------------------------------------------------------------------------

Scan Settings:
Scan using the following antivirus database: extended
Scan Archives: true
Scan Mail Bases: true

Scan Target - My Computer:
C:\
D:\
E:\

Scan Statistics:
Total number of scanned objects: 56208
Number of viruses found: 1
Number of infected objects: 6
Number of suspicious objects: 0
Duration of the scan process: 00:32:56

Infected Object Name / Virus Name / Last Action
C:\WINDOWS\system32\config\system.LOG Object is locked skipped
C:\WINDOWS\system32\config\software.LOG Object is locked skipped
C:\WINDOWS\system32\config\default.LOG Object is locked skipped
C:\WINDOWS\system32\config\SECURITY Object is locked skipped
C:\WINDOWS\system32\config\SAM Object is locked skipped
C:\WINDOWS\system32\config\SAM.LOG Object is locked skipped
C:\WINDOWS\system32\config\SECURITY.LOG Object is... Read more

A:Infected: not-a-virus:RiskTool.Win32.PsKill.1101

These look like false positives.
Most anti-virus programs will detect pskill.exe as a risk tool, mainly because of how its designed.
It's a utility that can terminate processes.
 

Read other 1 answers
RELEVANCY SCORE 42.8

i have set my bios administrator password from long time and iforget it and now i tried to update my bios and there is no change i need some help     my device is : dell inspiron 5520 and the problem with administrator bios password

A:i have set my bios administrator password from long time and iforget it and now i tried to update my bios and there is no change i need some help my device is : dell inspiron 5520 and the problem with administrator bios password

You need to place a voice call to Dell support --- they'll provide you an unlock key upon validation of ownership.

Read other 1 answers
RELEVANCY SCORE 42.4

Hello

My last BIOS update has failed and now my laptop Satellite PrU400 PSU45E is out of order.
I want to use the Crisis Recovery Disk with an USB floppy drive but I don't know the key combination to run the boot-block.
Is anybody can help me?

Best regards

A:Satellite Pro U400 BIOS update failed - What is BIOS Boot-block access

Hi

I wondering what Crisis Recovery Disk do you have ?:|
In my experience the special disk is needed which is available only for ASP technician.
Therefore it?s necessary to contact the ASP in your country in order to reflash the BIOS.

In my opinion you shouldn?t not try any ?Crisis Recovery disks? which you fond in the net? this can lead to mobo damage?

Read other 5 answers
RELEVANCY SCORE 42.4

The same issue from BIOS 1.2.5 is happening with BIOS 1.2.6. After the update, the boot screen remain totally black (no Dell logo) and you cant enter in the BIOS interface (no video at all).
The workaround is to downgrade to BIOS version 1.2.3 
The windows boots as usual, and maybe this is the reason that users havent noticed this issue.
The bios upgrade/downgrade is automated. No mouse clicks are needed. Just wait computer to boot and wait some minutes. After this (blind) downgrade (because there is no video), you will see the dell logo once again and everything works as usual.

Read other answers
RELEVANCY SCORE 42.4

On BIOS 1.88 have fix description:= = =[Problem fixes]
- Fixed an issue that system no VGA output when install Ultra Dock with 4K monitor.= = = My L540 laptop with Ultra Dock without 4K monitor ( just plug an LCD 1440*900 monitor), it will always hang on first BIOS Post(after Windows normal shutdown), force shutdown, power up again. it can normally boot. Does the latest 1.89 BIOS have the same situation? I can not update due to it no way to rollback old version BIOS.= = =[Important updates]
- Update includes a security fix.
(Note)If the UEFI BIOS has been updated to 1.89 or higher,
it is no longer able to roll back to the version before 1.89
for security improvement.= = = HPBird

Read other answers
RELEVANCY SCORE 42.4

Hello All,
3 days ago I applied the latest bios update to my 1-year old XPS15, running latest and fully patched 64 bit Windows 10 public release.
Since then
A) plugin a rather simple USB-3 hub into the system prevents the laptop from Booting into BIOS, or if manages to do that
B) plugin said USB-3 hub after full windows boot, freezes both USB ports devices.  The unfreeze can be overcame by unplugging the hub and then other device and then re-pluging both
C) after step B, windows explorer becomes very unstable and does not even show all the folder contents to some programs "open file" function.
D) the system does not recover anymore from plain S3 sleep, triggering a windows hard reboot.
I'm afraid the bios option to roll-back the bios version was not active, so I'm stuck.
Finally, the latest Intel diver published at the same time does not install cleanly after the bios update (although I managed to get it to show in the "program files" section.
I always apply the latest updates for drivers and bios promptly as main security policy and so far the system has behaved very well (Maybe with the exception of Hibernation from sleep time out, which always has been a bit faulty)

Read other answers
RELEVANCY SCORE 42.4

Hello, Problem 1:I've set the supervisor password some time ago on my T450s. I think I used the special character "!" which was accepted at that time, but I'm not sure anymore today. Now after severeal BIOS updates the "!" only leads to a beep of the system and I also tried all of my standard-passwords without "!" , but without success. Problem 2:Now I've tried to roll back to older BIOS versions to try if one of these accepts the "!". But every version I tried leads to a "secure flash authentication failed"-error after the reboot of the laptop to actually flash the BIOS. The following link says its the Rollback Prevention Enabled, but I checked in BIOS and it's clearly disabled.https://support.lenovo.com/sg/de/solutions/ht117858 Now I have no idea how to proceed. Has anyone seen that the BIOS has accepted special characters like "!"?Are there other T450s which are not able to rollback to older BIOS versions with the above mentioned error? Technical Infos:- Model: ThinkPad T450s 20BW-S03E00 (the one with Intel graphics only and a core i5-5200)- BIOS: 1.29(JBET65WW) Thanks in advance!  Best regards,Linus123

Read other answers
RELEVANCY SCORE 42.4

Hello everyone! I ama new user and i am coming up with this post as I couldn`t find any kind of solution for my problem.Recently I decided to do a reinstallation of my operating system, which also previously was Windows 7 Ultimate (x64). The installation went as usual, and after finishing it I went on to install all the latest drivers from the Lenovo site, for my product. When getting close to installing almost all the drivers i`ve needed, i stumbled upon a new version of the BIOS amnd the drivers and sfotware recommended for my laptop, by the producer. So i proceeded to install the upgrade, restarted the computer when it prompted me to do so, but after the so-called restart the laptop did not boot up as usual. At first it was telling me to not do anything as the BIOS is being flashed and then it was telling me something about some sort of image processing, things that i did not understand at the time (i have never encountered anything like that). After that my screen turned black. I have not done anything for a few couple of minutes as i thought it was supposed to be like that, but then i just force shut it down and unplugged the AC adapter. When trying to boot it all up again, the only thing i got was a black screen and nothing else.After doing a little bit of research it appears that, somehowm i`ve managed to corrupt the bios on my laptop or something, and nothing else would work at this point. I tried to remove the BIOS battery and the ram and then put them all back, trye... Read more

Read other answers
RELEVANCY SCORE 42.4

I updated from A19 to A22 and even back down to A19 on my OptiPlex 755...  Now it skips lines when I try to change settings in BIOS or when I boot to a DOS USB drive it double types letters.  Never happened before until after this update.  I ran into this a few years ago and I know its a simple fix, but I can't seem to remember what I did.  It does not happen in Windows 7.  I've swapped the keyboard, etc.

Any help would be greatly appreciated!

Thanks!
-Brian

Read other answers
RELEVANCY SCORE 42.4

Sorry that the title doesn't exactly describe the problem but I'm not exactly sure what to call it. Starting yesterday at start up my computer has been giving me a whole slew of errors in the event log along with BSOD with every normal start up. I haven't made any changes to the hardware or any changes to system files that I'm aware of and aside from some GPU related crashes here and there there weren't any problems to speak of until yesterday. So far I've run a full boot scan with Avast that returned with no results, a quick scan with Malwarebytes with no results, and a sfc /scannow that also said everything was fine. So all in all I'm not really sure what to do.

The Event IDs of the errors that appear in the event log are as follows: 3, 4, 10, 20, 41, 1001, 1101, 1530, 4105, 6000, 6008, 7000, 7001, 7009, 7026, and 10005.

I've attached the SF diagnostic tool zip as well with the problems starting at 3pm on the 28th. Any help would be greatly appreciated.

System specs are as follows:

OS - Windows 7 Home Premium 64bit

CPU - AMD Anthlon II X3 455 3.31 GHz

Motherboard - ASUS M5A 78L-M LX

Memory - Crucial 4GB DDR3?

PSU - Ultra 650w ATX

Graphics Card - HIS Radeon HD 6750 PCIe 1GB GDDR5

Hard Drives:

Western Digital WD Green WD10EARS 1TB 5400 RPM 64MB Cache SATA 3.0Gb/s 3.5"
Western Digital WD Green WD15EARS 1.5TB 64MB Cache SATA 3.0Gb/s 3.5"
Western Digital Caviar GP WD5000AACS 500GB 5400 to 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5"
Edit: Alright so ... Read more

A:BSOD On Normal Start up (Event 10, 20, 41, 1001, 1101, 6000 etc.)

Hi and Welcome OpticArray

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.



   Tip
Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 Troubleshooting Strategy


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8004db8038, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
****************************************************... Read more

Read other 7 answers
RELEVANCY SCORE 42.4

Dear all, Since the beginning I got troubles with charging - ( 94 % plugged in, not charging). The easiest solution was just remove the battery, but not for HP Omen. I removed battery and destroyed the rubber on the bottom. I had to open the laptop, because one morning I got the massegae that my laptop is overheated and fan does not work properly. Both fans works only during the lounch, when windows works only one fan was in operations, second one never starts again. Looking for the solution in the internet I have found that this can be because of BIOS is not updated.  I pushed F2, checked the the system, everything is fine and then I installed only one version which I have found there.No massages regarding overheating any more, both Fans are working full power and very very loud. Temperature of processors is 30C. In my room 25C.  I followed all instructions, but got massege BIOS update is blocked.I downloaded the most previous version, again BIOS update is blocked.Current version of bios is BIOS version F00 04Sep14.  Can it be solved somehow?     

A:Fan works like a helicopter-BIOS update is blocked BIOS vers...

@YuraL? To better help you we would need the exact model number or product number of your laptop/desktop??? http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00033108 REO

Read other 6 answers
RELEVANCY SCORE 42.4

Hi,

I have a old Tecra 9100 with years of good service, and this is my first problem, but is a great one, after a forced reboot the screen shows a BIOS block 1 damaged message. I have tried to repair the BIOS upgrading to the last version I have found, the 1.6 one, but its a Windows version (to upgrade from a running Toshiba computer I think) and when I try to run it in another computer to generate a FDD and upgrade BIOS, I cant, beacuse a Toshiba common modules message.

Its there any BIOS diskette image-archive I can dowload to perform the BIOS upgrade in the BIOS?

Thanks in advance.

A:Tecra 9100 - BIOS block 1 damaged and how to update BIOS?

Hello

All you can find is stuff on Toshiba support page. I don't know where you live but try to contact nearest Toshiba authorized service provider.
They have access to Toshiba database and they can obtain all this for you. Make a call and ask for help. I am pretty sure they will help you to solve this BIOS issue.

Read other 4 answers
RELEVANCY SCORE 42.4

Hello all, this is my first time posting here so please forgive any mistakes/oversights. I've just updated my Samsung laptop's system BIOS via their software update program, and my Nvidia GPU (GT 650m DDR3) no longer seems to work. The Nvidia control panel is still there, and it still gives me the option to select which programs use the GPU, but there is no GPU actitivity showing up. Also,I've tried playing Skyrim (which auto-detects the PC's graphics cards) , and the game no longer seems to detect the Nvidia GPU (just the Intel integrated graphics).

My laptop model is NP550PC7, with 6 gig of ram, and an i7 quad core CPU, and the OS is Window 7 Home Premium 64bit.

I've tried looking in the BIOS but I can't seem to find anything related to the GPU or display options. Any help or avice is much appreciated.

A:Problems with Nvidia gpu post BIOS system BIOS update.

Hi,

Have you updated your GPU with the latest drivers?

http://www.geforce.co.uk/drivers

Please navigate to:

Start> Control panel> Swith to icon view> device manager.
Look under "Display Adapters"

Is the Nvidia GPU listed there? If so are there any yellow symbols etc?

Cheers

Dave

Read other 4 answers
RELEVANCY SCORE 42.4

BIOS updates to my ThinkPad T460p seem to have been fine, up until going from 2.19 to 2.20.  Upon trying to upgrade to 2.20, I get the following message:  I cannot boot from USB key, I get the same issue.  This includes attempting with an older BIOS like 2.18; the same error message occurs even when not in Windows. Is there a way to force-flash the BIOS to get it back on track or is there some option I can try?  I only have a few remaining days left on my warranty, so I don't have much time left to open a support case if there's nothing else I can do other than replace the mainboard.

A:T460p BIOS update fails; "The BIOS does not match this system"

Call support.  Whatever happens, you should get the issue documented while the system is under warranty.  In U.S., the number is 1-800-426-7378

Read other 1 answers
RELEVANCY SCORE 42.4

Hi. I have a dell inspiron laptop. My problem starts when i tried to update my bios from a07 to a15. While the update is running my laptop screen suddenly turned blank but my laptop is still on. What should i do?

A:Bios update fail. Blank screen while updating bios

Please check and see if you can get into BIOS. By the way list Dell model number and version of window. Ex: Dell Inspiron 3543, windows 10
1. Power off computer
2. Power on computer, quickly start tapping F2 key continuously. Hopefully, you'll be able to see BIOS screen.

Read other 1 answers
RELEVANCY SCORE 42

Hello dear hp wizards! I have a weird problem. When I'm attempting to install the newest BIOS update thru HP Support Assistant, the installation program asks me for my BIOS password which doesn't work for some reason, but it works fine at startup when I access BIOS setup / update BIOS after I have to give the password there, it even gives me the happy "bleep bleep bleep bleep"- sound. I've never had this problem before.  Any ideas? kody

Read other answers
RELEVANCY SCORE 42

Ran a BIOS update which was a solution provided on this forum to prevent the Startup Menu from showing up each time I boot the machine. Said it was going to change from F16 to F10. Now it has been stuck on BIOS Management screen for 30 minutes. Screen says, The System BIOS is being updated. This update will take a few minutes to complete. Do not shut down or remove external power from your computer during the process. Verifying new BIOS image. Block 2048/2048. Progress 100%. How much longer should I wait?

A:stuck on BIOS Management screen after BIOS update

Hey @cgruchy11,  Thank you for joining in the HP Support Forums and asking for help with the BIOS Update on your HP Pavilion Notebook - 15-ab137ca that you are stuck on.  Did you manage to get the BIOS Update to finish?  Is it the BIOS Startup menu that you are trying to have not come up when you start the Notebook? The Basic Input/Output System (BIOS) is responsible for setting up devices used by your system so that those devices can send and receive data. The BIOS does a checklist on your hardware to make sure everything is functioning properly to be able to continue to the Operating System.  Updating the BIOS, also known as "flashing the BIOS," replaces the BIOS firmware. When completed successfully, a BIOS update can fix or enhance aspects of a notebook's performance, or provide support for newly installed hardware. However, if an incorrect update is installed or if the update process is interrupted, the motherboard can be permanently damaged, leaving the computer unable to boot. It is recommended to update your BIOS only if one or more of the following conditions apply:The update fixes a problem with your computer.The update enhances your computer's performance in a desired way.You are planning to change the operating system, processor, or other feature(s), and the current BIOS version will not support the new configuration.An HP Support Agent, or an HP support document, recommends that ... Read more

Read other 5 answers
RELEVANCY SCORE 42

I recently took a BIOS update and I later on found out that it has messed up my Notebook. File transfer speed has been riduculously slow, games and movies stutter occasionaly. Everything has changed and it does not look good. Product Info: Model: Pavilion AB522TXOS: Windows 10 64-bit ( updated to the very last) RAM: 8 GBProcessor: i5-6200U











Solved!
View Solution.

A:Downgrade a BIOS update or Optimising BIOS settings

Hey @Rahul_mk,  I would like to welcome you to the HP Support Community. If my reply resolves your issue or answer your question(s),  please let others know this reply was helpful by clicking the Accept as Solution button. I understand that you did a BIOS upgrade but it did not take well to your HP Pavilion Notebook - 15-ab522tx. You mentioned that your Notebook is now slow and games and movies are stuttering.  Many HP Notebooks have an HP BIOS Restore tool that may recover the BIOS from an earlier version and restore basic functionality. Please follow the documentation to do a BIOS reset.  Have you tried to perform a hard reset?Which BIOS version did  you upgrade to? You said that Windows 10 is up to date.Have you tried using the HP Support Assistant for updates also?  You can try following the below steps to reload the factory installed BIOS Setup Settings:In the BIOS Setup utility, select the Exit tab.Select Load Setup Defaults.Select Save Changes and Exit (pressing F5 and the Enter key will also load the Setup Defaults).Press Esc and then Enter to exit Setup.If you require further assistance, I would be more than happy to continue to help you. Please re-post with any information you think may help me find a resolution for you. Please also let me know if the BIOS reset works. If yo... Read more

Read other 3 answers
RELEVANCY SCORE 42

I attempted to update the BIOS on my Inspiron 5565 (AMD-A10 9600P) from .1.0.5 to v1.0.8 using the 'BIOS flash update' with the BIOS update file downloaded (and md5 hash verified on a usb key) from the drivers download page:
http://www.dell.com/support/home/uk/en/ukbsdt1/Drivers/DriversDetails?driverId=C52F8
I followed the instructions on this support page:
http://www.dell.com/support/article/us/en/04/SLN171755/updating-the-dell-bios-in-linux-and-ubuntu-environments?lang=EN#Flashing%20a%20Dell%20BIOS%20in%20a%20Linux%20Only%20Environment
to copy the BIOS update file to the USB but when I find and select the file in the 'BIOS flash update' function it reads the USB key (usb key read/write light flashing) but prompts with 'Invalid file!'. I have not renamed the file at all and I also tried to update to the other downloadable BIOS update file, v1.0.6 but get the same error message 'Invalid File!'
Reason for trying to update via the BIOS update feature is that I have a blank hard drive and I'm having trouble loading Ubuntu 16.04.2 LTS (but seem to have no issue with Ubuntu 14.04 LTS) so trying to update the BIOS as first troubleshooting elimination step.
Any tips or suggestions most appreciated.

Read other answers