Over 1 million tech questions and answers.

Compaq Presario 5900T

Q: Compaq Presario 5900T

I have a PIII 733mhz Compaq Presario 5900T that I need some help with.

1st thing is that my harddrive is broken and I am looking into getting a replacement for that, but my question is:

What kind of disks does this computer support?
I tried a 160gb samsung disk, but it hangs at compaq logo screen so I guess it's too big. (hoping to be able to change this through a bios update later)

2nd part is that when I found a matching disk, how will I restore bios on it? I have no restore cds left...and I suppose this computer stores a part of its bios on a hidden partition like all other compaqs.

The 384mb ram limit is fine with me since I am gonna run Linspire linux on it.

Anyone that can help? I tried Compaq support and got no help whatsoever.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Compaq Presario 5900T

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 102.8

I just recently acquired this desktop and am unable to find a brand name or model number on it. I was advised it possibly is a MSI model. The MSI site was not helpful. The HP/Compaq site also was not helpful. It has 5 PCI slots, 1 AGP slot, and 3 RAM slots. It supports a maximum of 384 MB of PC100 SDRAM. It has an Intel Pentium III 733 MHz processor.
 

A:Which Motherboard Is In Compaq Presario 5900T?

do everest or belarc help you at all?
 

Read other 3 answers
RELEVANCY SCORE 101.6

According to the MEMORYX site, it states the Presario 5900T supports up to 768 MB of RAM.

According to the CRUCIAL site, it states the Presario 5900T supports up to 384 MB of RAM.

Why the conflict in RAM amounts?

I currently have 320 MB installed and am running Windows 98SE(which is plenty for this operating system) , but if I decide to upgrade to Windows XP SP2, I would like to add more RAM.

--------------------------------------------------------------

Will one of the moderators please delete this post? I don't know how it got posted twice while I was updating it.

---------------------------------------------------------------
 

Read other answers
RELEVANCY SCORE 101.6

I have a Compaq Presario 5900T with an Intel Pentium III 733 MHz processor that I acquired a few months ago.

According to the MEMORYX site, it states the 5900T supports up to 768 MB of RAM.

According to the KINGSTON site, it states the 5900T supports up to 768 MB of RAM.

According to the CRUCIAL site, it states the 5900T supports up to 384 MB of RAM.

According to the HP/Compaq site, it states the 5900T supports up to 384 MB of RAM.

Why the conflict in RAM amounts?

I currently have 320 MB(64/128/128) installed and am running Windows 98SE, but if I decide to upgrade to Windows XP SP2, I would like to add more RAM.

I tend to lean more towards what the CRUCIAL site recommends for computer RAM, but now it has me wondering.
 

A:Maximum RAM Amount For Compaq Presario 5900T

Read other 7 answers
RELEVANCY SCORE 99.6

I acquired this desktop about 2 weeks ago. It's 3 - 4 years old and came with Windows 98SE originally installed, but the owner upgraded it to Windows XP SP1 several months ago. The file system was left in FAT32 format and was not converted to NTFS format.

The Western Digital Caviar WDC100AA hard drive is rated at 10 GB, but shows the following in My Computer:

HARD( C: ) - 7.35 GB

SYSTEM_SAV( D: ) - 1.94 GB

Other than the files in the Recycle Bin and in System Restore containing the same information in both partitions, everything else appears to be Compaq-related files that are years old.

What would be the best way to consolidate all 9.29 GB into the C: partition and do away with the D: partition, and what would be the best program to use?

Don't tell me to reformat the hard drive and start from scratch because that's not what I want to do.
 

A:A Question About Hard Drive In Compaq Presario 5900T Desktop

Look at Partition Magic to do that job.

Don't assume all the data will be safe in doing it, backup beforehand.
 

Read other 2 answers
RELEVANCY SCORE 61.6

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

Read other 1 answers
RELEVANCY SCORE 61.6

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

Read other 1 answers
RELEVANCY SCORE 61.2

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

Read other 14 answers
RELEVANCY SCORE 54

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

Read other answers
RELEVANCY SCORE 54

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

Read other 1 answers
RELEVANCY SCORE 54

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

Read other 1 answers
RELEVANCY SCORE 54

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

Read other 3 answers
RELEVANCY SCORE 54

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

Read other 16 answers
RELEVANCY SCORE 54

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

Read other 3 answers
RELEVANCY SCORE 54

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

Read other 8 answers
RELEVANCY SCORE 54

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

Read other 9 answers
RELEVANCY SCORE 54

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

Read other 6 answers
RELEVANCY SCORE 54

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

Read other 1 answers
RELEVANCY SCORE 53.6

I really don't know that much about computer but i have a compaq presario v6000 and i just brought a new hard disk drive ST9100824AS and i trying to put on windows 7 and its saying no IDE found when i run diagnosis test. When i go to run the windows 7 disk i get to the installing screen and its doesn't find hdd. I need some help. Thanks

-MaxG

Read other answers
RELEVANCY SCORE 53.6

My landlady's Compaq Presario SR1103WM is acting up and I'm pretty certain it is the PSU going out because the symptoms are the same as my PC had when it's PSU went belly up on me. It starts booting up fine until Windows XP Home starts loading, than it resets. I used a WinXP disk to repair the boot files and MBR with no effect, so we decided to reinstall Windows (been needing to do that anyway). Before doing that though, I was going to try recovering pictures of her grandkids by using a Linux Live CD, and ran into the same problem with it, so that eliminated Windows problems.

To the best of my knowledge, that leaves the PSU (likely) or the memory (possible) as the probable causes. I running Memtest86+ on it tonight to eliminate that cause.

Please correct me if I'm wrong in my diagnosis or if I am missing anything, but if I'm right about the PSU, that brings me to my main problem. I have heard that many Compaq models have proprietary PSUs so that you can't use off-the-shelf parts to replace them and have to buy one from them at a higher price. Is that the case with this model or can I order one from Newegg? I looked up the PC on Compaq's web site, and it didn't even say what PSU it has.

Thank you in advance.
 

A:Compaq Presario SR1103WM PSU

Memtest86+ has compleated 34 cycles with zero errors. Looks like it is the PSU.
 

Read other 1 answers
RELEVANCY SCORE 53.6

I need to replace HD in my Compaq but I can't seem to get the plastic cover off front without forcing it. I am afraid I will break it. Any suggestions?
Thanks for your time.
Jerry L.
 

A:COMPAQ PRESARIO COVER

Well you didn't say it so I will ask. Are you sure the front cover has to come off. Most cases you just remove the screws on the back, remove the back metal shroud, and access the machine from there. A few cases have the front covers come off but the majority don't.
 

Read other 1 answers
RELEVANCY SCORE 53.6

Hello all,

My 92-year-old grandfather -- who lives on a little island off the coast of Maine -- has emailed me regarding a problem that he is having with his ten-year old computer. If anyone out there would be kind enough to offer some advice on how to fix it, it would be greatly appreciated. There are no computer shops on the island, but my grandfather has plenty of tools and has worked extensively with radios throughout his life, so with some direction I have little doubt that he can make the repair.

This is an unconventional post, to be sure, and I don't really know anything about his computer ... but I think he has done a reasonable job describing the issue:

Hi Chris!
I have a severe computer trouble that I brought on myself.
First I will describe the computer and it's programs.
It is a Compaq, Presario 1200,
at least 10 yrs old.
Along the front edge of the top it has three indicator lights at the
left of center and three on the right.

The ones on the left are operating lights of which one shows when
the charger is in and the left most one shows when the computer is
started up by the button which is in front of the screen.
The one between these two shows the operating conditions, I believe,
as it usually flickers in concert with whatever is going on.
The three on the right each has a "locked padlock" symbol.
For programs it has Windows 98, Juno V.4, Intel Create and Share
and some other good things.
Everything has been working good.
I do... Read more

A:Compaq Presario Issue

What a sweet letter from "Grumpy Gramp"! Has he tried to plug in to another outlet completely? I would take the battery out completely and try this.

fyi: http://en.wikipedia.org/wiki/Compaq_Presario_1200
 

Read other 1 answers
RELEVANCY SCORE 53.6

I have a compaq presario 1650 laptop. It currently has a different language version of W98 installed. I want to format and reinstall the english version. The person I got the laptop from no longer has the compaq installation disk. Is it possible to format the harddrive and reinstall with the drivers that are located on compaq's site?
 

A:help with compaq presario 1650

As long as all the drivers are there, sure.

I've redone plenty of laptop machines. Just make sure the site has drivers for all the parts first, and get them all downloaded before you start.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

Read other 1 answers
RELEVANCY SCORE 53.6

Hey all,

I have this older Compaq Presario 7470 CPU, and I can't figure out how to open it. It doesn't have any buttons that pop open the chassis, or at least any that I can easily spot. I got a memory upgrade for it, and would like to put it in. Anyone know how to pop this thing open? Please email me or just reply here. Thanks!

Thanks,
Matt
 

A:Compaq Presario 7470

Here's a link to their site with instructions.
 

Read other 2 answers
RELEVANCY SCORE 53.6

Hello sir, I have a problem in bios password. I tried to reset cmos by removing rtc battery. But i can't remove password. System disabled code is 07437. Thanks, MNKTags:Microsoft Windows 7 (32-bit)Presario V3000

A:Compaq presario v3000

@Ulies? Enter   zyaztrq    or    alqelqe REO

Read other 1 answers
RELEVANCY SCORE 53.6

Just throwing this out in case someone can help

I have a Compaq Presario 5461 and when the hard drive crashed I got a new hard drive off ebay (same model the pc came with). When I try to use the compaq restore disk, i get an error that pretty much says restore can't be run on that machine. I realize that these restore disks are somehow keyed to the machine so you can't use them on another machine, but all the hardware is the same except for a little more memory. Only thing I can think of is a bios update that I applied. Did that alter the "signature" of the PC. If so, would it work if I backed of the bios update?

At this point the pc is just a toy, i'm using it to learn more about hardware, etc. I was able to install windows and just used my license key that came with the computer, so thats not an issue. But it bugs me that I can't get this restore to work. I did also notice that PC does not have an asset tag - wondering if the bios update zapped that.

Other notes - there was no extra partition that I know of on the orig hard drive, and there is only one restore CD (no diskette). I was able to do a restore of the pc several years ago
so I am pretty sure the disk is not defective.

Any help or thoughts would be appreciated
 

A:Compaq presario restore

a different hard drive than the one the pc came with shouldn't alter the restore process.
What error is it giving you?
 

Read other 4 answers
RELEVANCY SCORE 53.6

Original 500GB HDD was showing signs of eminent failure.I successfully cloned the drive to a new 400GB HDD, using NORTON GHOST.(I know this drive is smaller than the original, but less than 30GB was being used on the original)Anyway, The new drive would not boot.Assuming that the problem may be OS license-related, I ordered the Compaq Recovery Discs Set.While waiting for the Recovery Disc Set to arrive, I purchased a Sandisk 120GB SSD.(Again, I know that the 120GB SSD is smaller than the original 500GB HDD that came with the computer, but I do not plan to even fill it 50%.)Anyway, The Recovery Disc Set arrived and I attemted to use it on the new Sandisk 120GB SSD.The process seemed to go fine, all 3 discs of the set seemed to copy, and then the computer restarts and a screen displaying files flying across the screen from one folder to another stays there forever.I waited 15 hours and came back and I still just see:Files flying across the screen, from one folder to another folder.The drive activity light is blinking, but obviously there is a problem. Some possible related facts/information:The SSD is detected in the BIOS.The SSD Checks good, by the BIOS Diagnostics "Smart" Tests.I cannot find anywhere in the BIOS to disable AHCI, it only shows SATA or IDE.Current Bios version is 5.5.5, and I have been unable to find a BIOS Update anywhere.Current Memory (RAM) is 4GB (2x2GB), which was an upgrade since the machine was originally purchased. Can someone p... Read more

A:Compaq Presario SSD Upgrade

Greetings, I use Paragon Professional Disk Imaging software. Try Macrium Reflect free. Disk cloning is also included in the free version. Cheers!

Read other 1 answers
RELEVANCY SCORE 53.6

ok the dilemma is simple ok i bought this new laptop for the wife then it came with a built in webcam truth is i don't want that webcam so i bought another webcam that i am trying to use on msn but the laptop states found new hardware but doesn't install my webcam is usb ported it says m style on the cam the only thing it uses my wife states that she can access the cam thru the control panel but not in msn why is this occuring if someone could get to me asap would be greatly appreciated thanks in advance
 

A:Ok new laptop compaq presario

You may need to disable the original webcam

You can disable it by going to: Device Manager (Start->Run-> Devmgmt.msc)

Then locating your Webcam (that you don't want to use) and then right click on it and select disable

Then go back to MSN and use the settings to set up the new webcam
 

Read other 1 answers
RELEVANCY SCORE 53.6

I replaced my LCD cable (with two different cables) from the the stock one because it wouldnt fully display if not pushed all the way back. When I replaced the cable I put it all back together and it comes on without the previous problem but now it displays 4 identical screens like. 1 23 4I have tried updating the drivers for the video chooser and have even loaded previous drivers but to no avail still 4 screens. Can anyone help me out?

Read other answers
RELEVANCY SCORE 53.6

My parents bought a Compaq Presario laptop a few months ago and ever since we got it, it's been extremely slow. It's got Windows XP on it and after we click on whichever name we want to log on as, it literally can take up to about 7 minutes {if not longer} until it actually loads the desktop and everything. That's right, I kept track of time. Then, if we want to get on the internet {we have roadrunner} it takes even more time. I usually just sit there and watch a T.V. show while I wait for the home website to finally pop up.

I've tried a couple of things that I do to my own computer to make it faster, like going to msconfig and making sure the Startup List is unchecked. I also deleted those unnecessary things under IE-Tools-Internet Options like temporary internet files, cookies, history, etc. That makes my computer work better but when I try it on the laptop, it doesn't do a thing. It's still the exact same slow speed. I do have a Windows 2000 on my own computer and I've never worked with XP before so I don't know if there's a big difference there or what.

If anyone has had this problem or has any ideas on how to speed it up, that would be super!
Thank you!
 

A:very slow compaq presario

Read other 14 answers
RELEVANCY SCORE 53.6

My Father in Law has a Compaq Presario 5900T. His Hard drive crashed and I put a new 160G drive in it. When I try to restore the computer with the original Compaq restoration CD's it keeps rebooting without ever formatting, partitioning or anything else.

Can someone help? My FIL is bound and determined to continue using this machine. I believe he is afraid of change.
 

A:Compaq Presario Restore?

you need the old hard drive

the quick restore disks that come with compaq computers only work with certainpartition and hard drive sizes
to get the 160 gb hard drive to work, you will have to reformat the old hard drive and install everything on it

then copy the drive c partition over to the 160gb hard drive then use a partition program to increase the drive c to 160 gb
 

Read other 1 answers
RELEVANCY SCORE 53.6

Hi All

I realise this is possibly not the right room for this, but here goes.

Compaq presario V5000 laptop started giving consistant BSOD on start up, no boot (even safemode possible)

*** STOP 0x000000c2 (0x00000043, 0xDFFE8000, 0x00000000, 0x00000000)

Ran linux did memory and hard drive check, seems ok. Have got all my data off and trying to recover the computer to a working state, but turns out the Compaq recovery DVDs i made invoke windows XP, this of course brings on the blue screen of im at the end of my tether.

Any suggestions, as I havn't got a scratch startable version of windows (as they don't give away them anymore.)


Thanks in advance.

A:Compaq presario recovery

Hi.
ok why can you use your restore cd to boot the the laptop with pressing F11 when booting the laptop,then follow the instruction.

N.B
i also have problem with mind i can not used it anymore because i have accident i lost my restore cd for compaq presario v5000.
can you please copy and send them via my e-mail,[email protected]
if you done mined.

Read other 1 answers
RELEVANCY SCORE 53.6

my mother bought a compaq presario 5304 from a family member.when she got it,there was no system recovery disk for it.there was a disk that was for the 700's series.her computer will not detect the right drive because they used the wrong recovery disk for it.how do we get the computer to recognize and install its original drive.it was 56k.i am pretty much computer illiterate.john
[email protected]
 

A:compaq presario 5304

hmm system recovery. I'm not too big on using that. My overall suggestion would be go into dos at the startup and do a simpe C:/ format or is it the other way doh... Anyways at startup of windows press oh F8 I believe for systems with win 98 or higher but if you got win95 its either f5 or f8 or you can make a boot disk and do it that way.
 

Read other 1 answers
RELEVANCY SCORE 53.6

Its a presario 5000, i ran the belarc advisor tool to see what kind of memory i have, it said i have PC133, so i ordered some more, well, for the heck of it, i removed the memory in it to clean the board and the sticker on the factory memory says PC100!! so will PC133 memory still work with this thing even though it has PC100 in it now?
thanks!
 

A:compaq presario memory help..

Read other 7 answers
RELEVANCY SCORE 53.6

Hello! I am attempting to change a 80mm fan in my Compaq computer. The fan I want to change is, I believe, called the CPU fan. It has a lever next to it and 4 screws holding it down. My question is this: Do I have to move the lever on the side of the fan in order to pull the fan up and proceed to remove the screws or do I just remove the 4 screws?  Also, how do I remove the screws considering the awkward position they are in? (I've been working on trying to remove the screws; however, it is difficult to maneuver the screwdriver into the top of the screws to remove them. This is because part of the fan case is above the screws making it necessary to place the screwdriver sideways in order to remove the screws.) Thank you for your response.  

Read other answers
RELEVANCY SCORE 53.6

I have a compaq presario 7470 in my possession. It used to work, but not for some reason it refuses to. I just bought a power supply for it and it still doesnt work. I figured out that if u remove the J3 pin from pins 2 and 3 after pressing the power button it will turn on. The compaq screen comes up and it says '102-System Board Failure.' This seems bad...what should i do? is it a fried motherboard? if the board was fried would it even turn on?? Thanks!
 

A:Compaq Presario 7470

I don't think the motherboard is fried in which case it wouldn't boot, as you say. But it definitly is having some problems...

Has Compaq support service gotten back with you yet ?
 

Read other 11 answers
RELEVANCY SCORE 53.6

yeah, it's ancient, but i'm just getting it up and running to sell it. i got it from a friend. ok, my question is- why is the cpu fan missing? and why don't i see a set of pins on the motherboard for the fan?
i thought all cpu's needed a fan, so where's the power supply for it? (the cpu is a pentium 120mhz)
 

A:compaq presario 4112

Hi, Kerri Ann!

Not necessarily. A 120MHz may not need a fan on the CPU. It will more likely have a large heatsink, and an exhaust fan at the back.
 

Read other 1 answers
RELEVANCY SCORE 53.6

Hey fellas, Im currently trying to install XP on this box. Problem being, is im having a hard time getting the drivers for the mobo and such. I dont have the cd's and such for them either. The os in on there just fine and the network card and such work dandy, but i cant seem to get the USB ports enabled. I checked in the bios and i cant locate anything and im starting to worry.

Anyone got any help for me!
 

A:Compaq Presario 5600S

More specifically im looking for VIA vt82C598AT chipset drivers.
 

Read other 1 answers
RELEVANCY SCORE 53.6

Not sure if anyone can help here but worth a try.
I brought a new compaq presario desktop pc just before xmas. I got sick of all thier crap on it so I re-installed with another copy of windows xp prof sp2. Now I am having problems and want to go back to the original installation on the compaq.
Didn't do any restore disks as no-one explained this to me then. The install partition is still on the compaq but when I load up comp and try to press F10 to do it, it doesn't work (just keeps loading into windows). I can not figure out how to get the reinstall to start and am not sure how to do it manually. My brother has tried to manually start it in windows but it doesn't like this. Have tried changing the boot drive using the Esc and F1 keys as per start up options but it has the drive as grouped and can not specify H drive (where compaq restore is).
Any suggestions welcomed before I have to find more money to buy disk!
My brother has suggested that maybe we can delete the c drive partition therefore forcing the h drive to run, but want to leave this as a last result in case it doesn't work.
Thanks to anyone who reads this.
Ange

A:Need Help With Restore Of Compaq Presario

Ok Frad, if you want to restore the system to the way it was when you purchased it, the best way is to place the restore cd in your drive and restart. when the option comes up press what ever key you ned to to enter setup. scroll through the setup untill you can change the boot options. place the cd drive as your 1st boot option. when you have done that, save and exit setup. when the system reboots, you will be given the option to restore. READ THE WARNINGS CAREFULLY, THIS WILL FORMAT THE HARDRIVE AND ERASE ALL THE DATA THAT YOU HAVE. I recomend that you burn a copy of all your important files prior to doing this and good luck.

Printboy67

Read other 4 answers
RELEVANCY SCORE 53.6

All of a sudden, my Compaq Presario, Windows XP, won't boot up past the black "COMPAQ" screen. None of the keyboard keys respond (we've tried three different keyboards). All the lights light up when we first turn on the computer, but then it just stops at the black screen with boot options, but none of the keys on the keyboard will do anything. Does anyone know what the problem might be?

A:Booting Up Compaq Presario

Have you tried booting into "Safe Mode" to see if its a software/driver issue?

Read other 4 answers
RELEVANCY SCORE 53.6

Hello Everyone,

I am running Windows XP Pro on a HP Compaq Presario S3190UK desktop and since this evening I haven't been able to even get to the Windows Splash screen.

When I boot I am given the options of Safe Mode, Last Known Good Configuration, Start Windows Normally and Recovery Mode (which doesn't respond). Whichever option I select it stalls and will not boot the files and when I boot in safe mode it stalls after about seven seconds.

I have the Operating CD which I have tried to boot from but upon boot up I get the message "Please insert the Restore Plus! CD" . I don't have this.

Is there any chance of me retrieving my data?

Thanks for your help in advance.
 

A:Restore Plus! CD for HP Compaq Presario

Read other 16 answers
RELEVANCY SCORE 53.6

does anyone have or know where i can find the dip switch settings for a compaq presario 1930 laptop?
 

Read other answers
RELEVANCY SCORE 53.6

I have the best luck with computers ever. My brother wanted me to format his oldschool compaq presario 5000 computer so I formatted with the win XP setup disk, when I went to restart to start installing windows after the format it takes me to a blank screen that reads:
"Couldn't open drive multi(0)disk(0)rdisk(0)partition(1) NTLDR: couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"

I have booted with floppy and fdisk, fdisk /mbr, formatted about a million times using FAT and NTFS file systems, I have deleted all partitions, did everythinig I can think of.

Does anyone have any idea of how I might solve this and install windows? I know the HDD isn't shot because I can put it in my other comp and actually do a full win install, but when I place it back in the compaq, it brings me to the same error screen.

Any help would be greatly appreciated. Thanks guys.

one more thing, I am kinda a n00b at this sorta stuff so any ideas please give me the *hold my hand* explination and guide me what to do with step by step instructions, thanks again guys!

A:Compaq Presario problems PLZ HELP!

Check in your BIOS and make sure you have the right HDD displayed. It would be best to set it to auto. Also you could try setting the BIOS back to the default values.

Read other 3 answers
RELEVANCY SCORE 53.6

Hey all,
Does anybody know if all of the motherboards in the Presario V6000 laptop series are the same size and shape?

More specifically, does anybody know if a V6000 motherboard would fit in a V6310 case?

If you need more info, let me know.

Thanks!
 

Read other answers
RELEVANCY SCORE 53.6

I have kali linux live on usb and wanna load it i used windowsimager32 to make it work on my ither laptop but jt wont work on this one

Read other answers
RELEVANCY SCORE 53.6

My compaq was working fine until one day it just went off during a user session. Pushing the power button made it try to start but when it began to load windows 98 it quit again. After serveral retries it finally started up again. It ran OK for about one week , then just went off again. This was during a user session.(user session meaning it was in use at the time). I tried to restart it but it would not restart. Finally it tried to start, then said press F2, then the video went out. Nosthing shows up on the screen now. When powered on you can hear the hard drive start up but that's about it. The three year warantee lapsed about a year ago . I was wondering whether or not this has something to do with the cmos battery. Apparently several people I know who purchased a Compaq laptop have run into the same problem. I have a friend who owns an IBM thinkpad which has done precisely the same thing. Any suggestions.
Sincerely
Frank
 

A:Compaq presario 1200XL111

It is possible for the cmos battery to cause similiar problems, but from what you are saying it looks like a processor problem. For the system to just shut off in the middle of being used and unable to start up again, shows the possibility that the processor has overheated and the machine has powered off, however because the machine is still too hot it wouldnt fully start up again.
To say that your video has then gone, could mean the processor is completely knackered, signs of life can still be seen from the machine but nothing will appear on the screen, in most cases the monitor will stay on standby even when the machine is powered on.

I suggest a new processor, with new heatsinc and fan.
 

Read other 3 answers