Over 1 million tech questions and answers.

What CPU will this motherboard accept

Q: What CPU will this motherboard accept

What is the highest CPU speed supported by an Abit SD7-533 Motherboard?

RELEVANCY SCORE 200
Preferred Solution: What CPU will this motherboard accept

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: What CPU will this motherboard accept

I would suppose these vague lists are close to the truth http://www.cpu-upgrade.com/mb-ABIT/SD7-533.html but it might support faster P4s with 400 FSB, too.

Read other 2 answers
RELEVANCY SCORE 54.4

I am making a system the asus p5n32 sli plus mobo with 4gbs of ram, and for some reason whenever I install the 4 stick of ram the system becomes completely unstable. When I am working with 3gbs of memory everything works great. The System is 24 hours stable with 3gbs of ram in orthos and prime95. Do I need to be using a 64 bit os to be stable with 4Gbs of memory?
 

A:Motherboard Won't Accept 4Gbs of ram

Read other 6 answers
RELEVANCY SCORE 54.4

i have a J&W ip-35 pro motherboard and four Geil 1GB sticks of RAM. when i put more than 2GB of RAM in i get beeping and the computer wont start. I can have 2GB in and it will work fine. any suggestions????
 

A:Motherboard wont accept more than 2GB ram

Read other 13 answers
RELEVANCY SCORE 53.2

I have a pc with a Packard Bell imedia S2185 (P0) motherboard and a AMD A4-5000 CPU.
My present graphics card is a Nvidia Geforce GT 620 and this is beginnng to struggle with recent games. I would like to replace it with the Radeon RX 480 graphics card but having little technical knowledge wonder if the limitations of my present motherboard may prevent me doing this. Thank you for looking into this for me.
 

A:Will my motherboard accept a Radeon RX 480 graphics card?

Read other 8 answers
RELEVANCY SCORE 52.4

I need someone to help me. Can anyone tell me if a Trigem 2002052 motherboard take a celeron D 2.5 processor? Right now the motherboard has a 2.4 celeron chip. The board is a mPGA478 pin socket.
 

A:will the trigem 2002052 motherboard accept a celeron D 2.5 chip

It Might. The only difference in the chips is that the D has more L2 cache. If this is an upgrade its not much of one. You can also put a P4 in that board, unless its one in a Compaq or HP computer and then the motherboard may be clock locked. If its a retail motherboard you can go either way.
 

Read other 1 answers
RELEVANCY SCORE 48.8

Audio jack from laptop only accept the first device introduced and if i want to exchange headphones with speakers the speakers dont work,but if i restart and insert the speakers work very good,please tell me how to solve the problem 

Read other answers
RELEVANCY SCORE 33.6

I recently changed ISPs and added a Netgear wireless router to the modem. I configured the modem and router useing my PC laptop, and generated a WEP Key with 64-bit encryption. I was able to successfully connect with my WEP Key on my PC and on my TiVo, but my Mac (which is a new MacBook) will not accept my WEP Key, saying there is an error in joining the network.

The dropdown menu in the AirPort window has four choices: (1) WEP Password, (2) WEP 40/128-bit hex, (3) WEP 40/128-bit ASCII and (4) LEAP. I'm assuming that since my WEP key is set to 64-bit encryption, that I should use the first option, which is what I have been trying.

I was able to connect my MacBook to my old wirelss signal, which I have not disconnected it (it's cable-based and runs from a different modem/router; my new ISP is DSL-based), and that signal also has a WEP Key with 64-bit encryption.

I also tried disabling the WEP key encryption for a time, and then I was able to secure a connection to the new signal, but I want to maintain the encryption. Please help.
 

A:Mac Won't Accept WEP Key

Read other 6 answers
RELEVANCY SCORE 33.2

TAB 2A7-30HC pad/mobile will not accept the local operator's SIM card Telia. It may be that it is not an approved operator in the list of operators.How do I get an operator on the list. Telia is a large government supplier in Sweden.The unit was bought out side of Sweden.The unit works with other operator s SIM cards but not Telia! Any tips just use is on wifi today

Read other answers
RELEVANCY SCORE 33.2

Ok, I've got a dual P3 700 at work that we really can't use in it's current state at work. It's a fiery tower that was meant to be a print server from EFI . They won't even support the hardware on their website. It's got a Tyan Thunderbolt mainboard in it. They used their proprietary BIOS when they built it so you couldn't change the OS. After finally figuring out what mainboard was in there I went to Tyan's website and downloaded their version of the BIOS and flashed it. Now when I try to install 2K, I can partition the drive with no problems but it keeps telling me that I need to choose a windows 2000 compatible partition to install it on. It doesn't give me the option to format the partition in the setup. I am able to go into the recovery console and use the format command to format the partition, but it keeps giving me the same error in the setup. The hard drive is a SCSI IBM running from the onboard SCSI ultra 2. I checked all the BIOS & SCSI BIOS settings and they seem to be correct. I tried downloading the latest SCSI drivers and loading them before the install, but that doesn't make a difference either. I've also tried different partition sizes with no luck. What I don't get is why can I partition the drive and format it (in recovery console), but can't install on it? Can anyone give me any ideas on what to do? Thanks
 

A:Can't get Win 2K to accept partitions

Have you tried formatting with Partition Magic? I use version 8 to partition all custom systems that I build and I love it, it works grate! I have never had a problem using PM8.

Lance
 

Read other 1 answers
RELEVANCY SCORE 33.2

Is there ANY product out there that will allow a PC to accept Mac formatted disks (zips, floppys, etc.)?
 

A:PC accept Mac disks?

Chris286 said:

Is there ANY product out there that will allow a PC to accept Mac formatted disks (zips, floppys, etc.)?Click to expand...

http://www.download.com/TransMac/3000-2248_4-10256283.html?tag=lst-0-1
 

Read other 1 answers
RELEVANCY SCORE 33.2

Hi everybody,

it's my first post here and I have a serious problem.

My old laptops motherboard burned, so I stripped the RAM and HDD an threw the rest away. I bought a used Toshiba Satellite Pro without the HDD.

I put the old one into new laptop. But I had set HDD pw on my old laptop. I remember it 100% correct but the new computer does not unlock the drive. It says: HDD Password Invalidate Press any key to continue.

I tried going through Bios but it says "Registered". AndI cant select the Drive, going up/down on the list they just skip this drive.

I also tried booting straight from windows Disc to format and reinstall Windows but it askes HDD password before even booting up the disc.
Any Ideas how I can get rid of password or get the computer to accept it?
eidt: I dont necessarily need the data from the disc. I do lose some valuable pictures but I am happy if I can just format and install new wimdows.
 

A:Failing to accept HDD PW

howdy and welcome. You may want to re-read the rules page, as we will not assist in bypassing passwords.

Please do not ask for assistance with (or ways to bypass) a forgotten or unknown password, personal identification number (PIN) or any other type of access code that may be required on a computer, mobile device or web site. As there is no way to verify the actual situation or intent, no assistance will be provided and any such threads will be closed.Click to expand...

thanks for understanding,

v
 

Read other 1 answers
RELEVANCY SCORE 33.2

My daughter's HP laptop (windows XP) was running fine. Battery just ran out, she plugged the computer in and now it will not let her log back on (and she is sure she is typing her password correctly). Any suggestions?
 

A:Won't Accept Password

Read other 15 answers
RELEVANCY SCORE 33.2

My new laptop that I had only been using for a few days, suddenly won't accept my password. I KNOW it's the correct password, but it says no. I never set up Password Retrieval, since I only had it for a few days. What do I do?? I absolutely can NOT get on!

A:Won't accept password

sorry, but we cannot help with password issues, per TSF rules.

http://www.techsupportforum.com/rules.php


Quote:




ILLEGAL ACTIVITIES

Users may not post hacks, cracks, or give instruction how to pirate any type of software, or anything similar, in any forum of TSF. We do not condone, support or give instruction on any illegal activity pertaining to computer systems, computer hardware, computer software programs or computer related activities. Included in this group of activities are requests for help to circumvent system admin passwords or Administrator settings on networks. We do understand that the majority of requests may be legitimate, but we do not have the means to discern these from non-legitimate requests.

Read other 2 answers
RELEVANCY SCORE 33.2
A:The service cannot accept......

Norton AV is the most "Pain in the B" ...So many bugs and problems ...

No wonder your going Nut.....Use Norton Uninstall tool to remove it ...
Use Avast instead ....IMO.

Read other 1 answers
RELEVANCY SCORE 33.2

Hello,

This is about not being able to accept cookies, I E version 6.

I have changed and re-changed setting in internet options. I put the bar at accept all cookies. I have shut down my firewall and this did not help. I am using Zonealarm.
I have seen this addressed on several news groups and no one seems to have an answer. I have searched the knowledge base and tried several suggestions, no help.

Starting out, I E 6 was working okay, and then it quit accepting cookies. I asked for some knowledge from this forum. It was suggested that I use I E version 5.5.

I have Win98, Pentium II, 233 mhz, 196 megs ram, 32 g hd, plenty of room.

I used a program call IEradicator to remove I E 6. (http:\\www.98lite.net)
This did seem to remove I E from my computer. I ran it twice. I scandisk and defraged, ran regclean, scandisk and defrag again. I installed I E version 5.5. I still can not get this computer to accept cookies. I discovered that the internet options drop down was the same as version 6. This options menu still has a privacy tab included. I donít think that this is part of version 5.5.

I still canít accept cookies.

Does anyone know what to work over, to help me correct this main problem?

I know that I can empty all data and reformat. Might be what has to be. Did not want to do this.
 

A:Cookies, can not accept

Here are two possible ways that may help .

Double check your settings ( close & reopen ) to make sure everthing has been done correctly & the changes have stuck .

--------------------------------------------------------------------------------

http://www.langa.com/newsletters/2002/2002-12-02.htm
Dear Fred: Let me tell you of a simple way I have come up with
for managing cookies. It may not work for everyone, but it
works for me.
In the Internet Options (Security tab), I set both the
Internet zone and the Trusted Sites zone to Medium security.
Then, in the Internet zone, I disallow cookies that are stored
on the computer, while allowing session cookies. In the
Trusted Sites zone, I allow both. Whenever I run into a site
which needs to store a cookie (like eBay, Amazon, cable TV
listings, etc.) I add that site to the Trusted Sites zone. At
the end of the day, I have on the drive those cookies which I
need to keep, and all others are history.
To make this even easier, I use a small application called
Trust Setter, which puts two buttons in the IE toolbar, Add to
Trusted Sites, and Add to Restricted Sites. Get it from
http://www.jasons-toolbox.com/ScriptRepository/ .
Available by right clicking on the unwanted page .

---------------------------------------------------------------------------------

http://www.jasons-toolbox.com/cookiejar.asp
Cookies present a dilemma. On one hand, chances are you want to accept cookies from some sites
(for such functionality as savi... Read more

Read other 3 answers
RELEVANCY SCORE 33.2

I bought a 15inch notebook in November, paying for Microsoft Word ,Home and Student package. It worked okay until January when Word became disabled, I received a message saying my subscription had been cancelled.(I'd paid to have the package permanently). I was advised to type in a product code. I typed in the product code HP had given me but got a message saying code was no good. I phoned up Microsoft. They said the code hadn't been activated by the seller and was of a type only given for trials anyway.I emailed the HP sales consultant. I got a reply which told me to contact technical support: no link, email address or telephone number. I wrote back, telling them to sort it out or at least pass me on to someone who could.After this I received a text telling me the product was going to be collected from me this Wednesday, Feb1. I got an email from the sales consultant implying i'd asked for this. There's some mention of a replacement but I haven't been told when this is going to be.I phoned up today and I could tell the guy speaking to me was giving me a load of guff. he said the product could only be fixed by them collecting it. He said he'd email as to when a replacement would arrive but I knew he was making it up and the email hasn't arrived.They want to collect the laptop on Wednesday February 1. If I let them collect it I've got no idea when a replacement will arrive and they might try to argue there's nothing wrong with the laptop.I've... Read more

Read other answers
RELEVANCY SCORE 33.2

My Intel 975xbx (rev. 304) will accept three 1 GB sticks of Corasair XMS memory, but when I put a fourth stick in, I get the three beeps and it won't post. I have tried all four sticks in different combinations, so it isn't a particular module that is "bad". I followed the voltage settings recommended by Corsair and have tried altering them, but I can't get all four to work at the same time. They were all purchased together, by the way. I can't find anything on Intel's site or Corsair's sited about a known problem. Any help would be appreciated.

Thanks,

Bill
 

A:Bad Axe won't accept 4 sticks of ram

Read other 6 answers
RELEVANCY SCORE 33.2

I have an ABIT KX7333 board with AWARD Bios/softmenu 3. I am using corsair pc2700 ddr ram and an Athlon xp 1800+. Everytime I go into my BIOS and change anything, namely the memory CAS from 2.5 to 2, or anything with the memory for that matter, it won't boot. I know the memory can run at that rate but it jsut isn't working. Also, I am using an Nvidia GeForce 4 ti 4200 vid card, and I can't change the AGP settings for optimal use. The only thing I can use is the optimum performance defaults, which is not as optimal as I know it can be. I have the latest Bios update, what is the deal here? Any input would be greatly appreciated
 

A:BIOS won't accept changes....?

Possibly insufficient power, I've had the problem in the past while trying to run larger amounts of RAM at higher speeds. I had to go to a 400 watt PS.
 

Read other 1 answers
RELEVANCY SCORE 33.2

Hi, is it possible to incluse a tick box on a html form which then 'energises' the 'Submit' button?

E.g. I have a form which i want people to read and agree (via a tick-box) to a disclaimer before the submit button on the form is energised.

I do have a vaugue knowlege of Html, but am stumped on this issue.

Thanks, Paul.
 

A:Accept 'Tick-box'

You need something other than HTML to accomplish this. SOme sort of active scripting. I an sure there something that can be done with Java type form validation.
 

Read other 3 answers
RELEVANCY SCORE 33.2

Try as I might, I can't insert a cd in the CD drive.
It has been working and I've tried EVERYTHING that's
on the help line, but really, it doesn't have a cd in
and when I try to put in a cd, it just goes in a bit and
then won't grab and pull it in. Feels like it's butting
against something hard and already in.

This is for a Mac OS X
Version 10.3.5
Processor 1.8 GHz PowerPC G5
 

Read other answers
RELEVANCY SCORE 33.2

system crashed got it back with Dell support can not upgrade to w8.1
q

Read other answers
RELEVANCY SCORE 33.2

I am running Windows XP Professional, Version 2002, SP3 in a corporate environment. I use IE7 version 7.0.5730.11.

When I try to add a website as a favorite it doesn't "stick". I can see it on my favorites list...but then without any other action from myself it will disappear. Something is deleting them. The weird thing is...not all get deleted. Some stick and some don't, but most don't.

What is going on!??

A:IE7 won't accept new favorites

Welcome to TSF

Seems to be a common issue but no real solution

Is your Favorites folder in the default location:
C:\Documents and Settings\user account name\Favorites ?

Try the procedures in this article:
http://windowsxp.mvps.org/ie/redxorg.htm

Uninstalling /reinstalling IE7 may help. If XP SP3 was installed after IE7,
it should be uninstalled before uninstalling IE7.
IEBlog- IE and Windows XP Service Pack 3:
http://blogs.msdn.com/ie/archive/200...and-xpsp3.aspx

When installing/reinstalling IE7 disable antispyware/antivirus programs and
follow other tips/warnings at http://www.ie-vista.com/known_issues.html

http://groups.google.com/group/micro...e9cbf9da073653

Read other 1 answers
RELEVANCY SCORE 33.2

did a restore and password wont work, cd drive is broken so cant use any recovery cd's. need to know how to bypass password to get to desktop. Can't use cd drive for anything. Cant do full system restore with f11. NEED TO BYPASS THE PASSWORD TO GET ONTO DESKTOP PAGE!

A:Won't accept old password

Visit this link-http://www.mydigitallife.info/2007/05/27/forgot-windows-administrator-password-ways-to-recover-and-reset-password-in-vistaxp20032knt/

But i think you might be still needing a workable Cd drive.I am not sure whether you can boot this software from a USB.

Read other 2 answers
RELEVANCY SCORE 33.2

Can anyone assist with the following?

i Fitted new Asus P5GDC-V Deluxe mobo, board with a P4 3.2 gig processor, the board does post.
However on completing the IDE scan the following message appears.

"An ultra ATA/66 (or faster) drive is connected with a 40-pin IDE cable on the primary channel.
Drive speed is downgraded to ultra ATA/33 mode"

after seeing the message the PC suggests a hardware change has taken place but will not boot from the primary drive,
The correct IDE cable is used (in the correct cofiguration) in the primary IDE slot.
in the BIOS the drive is seen but it appears not recognised?
The boot H/D drive is A seagate Barracuda ATA 1V (model ST38002 1a) 80 GIG.
relitively new with W XP loaded.

If anyone has come across this before i'd appreiciate some guidence.

Regards Libraryman.
 

A:Mobo will not accept my H/D

have you tried with a different IDE Cable?... just asking...
 

Read other 22 answers
RELEVANCY SCORE 33.2

My mobo will accept up to PC100 and i have 128 mb of pc100 on it now.Will it accept a stick of pc 133 instead of pc 100.Will it reject it or accept it, and will i have repercussions from it. What would it do etc..
 

A:Will my mobo accept this ram?

More than likely your motherboard will accept it, but it will only run at PC100 speed. And I doubt you will have any problems, just you will not be running the ram at it maximum capacity. If you could give us some more info, like what kind of mobo, ram, etc. you have it would be good.
 

Read other 7 answers
RELEVANCY SCORE 33.2

HP DX2450 Microtower. This system comes with HP branded Windows XP install disk and a restore disk(among others). I wanted to perform a repair install on XP. Inserted the HP restore disk, system reported it sees a valid restore disk and ask for the Windows install disk. I put in the HP Windows XP disk, when it got to "install Windows" , I chose "repair an existing XP installation". When it finished installing, it ask for the product ID. I looked on the CD, in the i386 folder/unattend.txt, bottom line is the product ID. When I put in this key, it tells me it's not a valid key. Now I'm stuck. How can this not be a valid ID when it's on the same disk used to install Windows, and what can I do now?

A:Win XP will not accept product key

Often the product key is on a stick attached to the computer.

Read other 5 answers
RELEVANCY SCORE 33.2

Hello. I just brought home an HP All in One desktop. I sat and filled it in last night. I just tried to get on it and I can't get past the login screen. I wrote my password down and it won't accept it. It says my name and underneath, it asks for my psswd. My email is wrong. It says **REMOVED**. That's not me. I have spent 3 hours getting # after # from Microsoft and sites to log onto. Not ONE of them helps ant the online chat is worthless. Is anyone out there able to help me? I'm so upset. Thanks. Maggie

Read other answers
RELEVANCY SCORE 33.2

Hi guys,

I'm going crazy here... I am looking for a way to enable VPN connections TO my Windows 7 machine. I cannot seem to find this anywhere.

I know this was kinda hidden on Vista too, but in Win7 I cannot even find it!

Can someone PLEASE point me in the right direction. I'd like to be able to connect via VPN to my home machine when I'm not around, you know - access shared folders, printers and such.

I really hope they put this in the beta and that I am just blind and not seeing it.

A:How to Accept VPN connections?

  
Quote: Originally Posted by peconi


Hi guys,

I'm going crazy here... I am looking for a way to enable VPN connections TO my Windows 7 machine. I cannot seem to find this anywhere.

I know this was kinda hidden on Vista too, but in Win7 I cannot even find it!

Can someone PLEASE point me in the right direction. I'd like to be able to connect via VPN to my home machine when I'm not around, you know - access shared folders, printers and such.

I really hope they put this in the beta and that I am just blind and not seeing it.


hi open control panel - network and sharing center - change adapter settings
while the window is open press alt and the menu bar will be visible then go file new incoming connection and follow the prompts

cheers brad

Read other 9 answers
RELEVANCY SCORE 33.2

Hello,

By some reason Win7 only wil run with 1 x 2 GB RAM.

First i couldn't install Win7 - i got BSOD wit somthing about VSMRAID.SYS and IRQL NOT EQUAL.
Then I try to remove som hardware, and when I removed one of my to 2 GB RAM, then Win7 was installing perfect.

Afterwods I tryed to inset the second 2 GB RAM again - but then BSoD came again.

What is wrong? Why do Win7 give BSoD?

Win XP was OK with 2 x 2 GB - Why is Win7 not?

RAM: 2 x 2 GB GEIL, PC2-6400, DDR2-800
Mainboard: MSI P45 Zilent/Platinum with the newest BIOS.

Please help me :-)

A:Windows7 only accept 2 GB RAM

Hi,

Welcome to 7 forums

In this regard, i guess the problem is with the 2 GB RAM or the RAM slot. The issue is not with Windows 7.

► Lets say RAM 1 works, RAM 2 caused the issue.

* To find if the defect is with that RAM or the slot, remove the working RAM 1 and place the RAM 2 in that same slot.

* If your Windows works fine, then the problem may be with the other RAM slot. If the RAM 2 causes BSOD now, then the issue is with the RAM. You may have to replace that RAM 2.

* Additionally, you can try interchanging the RAM slots and boot up !.

Hope this helps
*

Read other 9 answers
RELEVANCY SCORE 33.2

I just bought some Maxell DVD-R discs which won't work with my Win7 drive.

I've never paid much attention to what I use before, but surprised about this. My other discs that work fine are Memorex DVD+R.

I verified my DVD drivers are up to date.

Please advise.

A:PC won't accept Maxell DVD-R

There have always been different types of DVD RW disks +R and -R being the main ones, check the specs of your Writer to see if you can burn the disks you have. Of course some systems can be temperamental and refuse to accept a certain batch of disks, A certain manufacturer's disks, or even individual disks of a specific batch

Read other 2 answers
RELEVANCY SCORE 33.2

i wonder if you can help a complete novice with a problem i have. until yesterday my laptop which has vista home edition running, worked just fine. i started it up earlier today and i was met by various error messages. the main message was "the service cannot accept control messages at this time" i got this when trying to update my anti virus ( Norton ). i also got it when trying to open up ccleaner and some other windows programmes. some programmes , like "convertx dvd "worked OK , itried to do system restore but got the same message. i started up in safe mode and managed to do system restore, taking my laptop settings back a week. i restarted in normal mode only to be met by more errors " host process for windows services stopped working and was closed " " application layer gateway service stopped working and was closed ", and also the " service cannot accept control messages at this time " i still cant access the programmes i mentioned , i even tried the repair your computer option on my laptop, and the last known good configuration option ,no change. so I'm stuck. anyone any ideas? is it a virus? or is there a solution you can help me with. sorry its a bit long winded, but that's what has happened.
 

A:the service cannot accept...

has anybody any ideas how to solve this. would a complete reset work? if i do it what will i lose? programmes I've loaded? emails? sorry but I'm very new to PCs so any help would be very much appreciate, thanx
 

Read other 1 answers
RELEVANCY SCORE 33.2

Hello,

I have done everything I can think of to allow incoming RDP sessions, but it is not working.

I have checked the box under system properties/remote (Allow Remote Assistance connection to this computer) and I have check the box under McAfee Firewall/ports and system services for port 3389.

I have also temporarily turned off the firewall....no good.

I know that system I am RDP'ing from works because I can get to a Windows XP machine.

Thanks in advance.

A:Will not accept RDP incoming

  
Quote: Originally Posted by mlvogt57


Hello,

I have done everything I can think of to allow incoming RDP sessions, but it is not working.

I have checked the box under system properties/remote (Allow Remote Assistance connection to this computer) and I have check the box under McAfee Firewall/ports and system services for port 3389.

I have also temporarily turned off the firewall....no good.

I know that system I am RDP'ing from works because I can get to a Windows XP machine.

Thanks in advance.



What version of win 7 are you using (starter,home,pro,ultimate)??
ken J

Read other 8 answers
RELEVANCY SCORE 33.2

The following configuration change was requested for this computer's trusted platform module (TPM):Clear TPM.

Read other answers
RELEVANCY SCORE 32.8

Hi,

I have a laptop that was Vista and was upgraded to win7 professional. I added 2 users to it, one for the domain at work for use with cisco vpn client and one to log on the computer with no intention of connection to the domain at work.

one is DOMAIN\USERNAME and the other is COMPUTERNAME\USERNAME They both have the same password.

These have been typed over and over and they get one of 2 errors everytime. "There are currently no logon servers available ro service the logon request" or "The username or password is incorrect". This person is offsite and has used the computer for several months logging in and no password changes. I have had him try them over and over. reboot, etc. nothing seem to work. I had him try a back door user and password I put on there and no luck with that either.

Note: he had a disc in the cd drive at some point so i had him take it out, reboot and try again. It did not help. I cannot do anything because we cannot even get into windows.

Please send any ideas.

Thank you!

A:Win 7 Laptop will not accept logins

I tried to delete this topic, but I do not see that option.

The user used a different shift key and it worked. Sometimes it is the simplest things! Apparently one of the shift keys stopped working on the laptop.

Thank you!

Read other 2 answers
RELEVANCY SCORE 32.8

I currently run IE 10 and have a problem with one particular Website (Tesco) in that when using IE the site won't accept ANY keystrokes so I can't log in to my account or do anything that requires me to type into any of their web pages.

I have had this problem for a couple of years and it was apparent in earlier versions of IE as well. When it first happened a couple of years ago I reinstalled IE, and since then I have up dated to the new versions as they have been released, but always the same issue.

I only get this problem with Tesco website, I have never had a problem anywhere else. My solution is simply to use a different browser and it works fine in Firefox, Opera and Chrome. However, IE is my default browser and I nearly always forget about the problem until I come to log in and then remember that I have to use another browser instead - it gets a bit irksome!

I have Kaspersky installed so I have tried using their virtual keyboard, but whilst that is enabled for the site, it too fails to populate any fields when I try to use it.

Given that I have a work around I'm not willing to spend too much time on this, but if anyone knows a simple fix I would like to know it!

Thanks!

A:Site won't accept keystrokes

Welcome to the site

I am on IE6 and that site will accept keystrokes...Please try the mobile interface and see if it works for you..

http://m.tesco.com/mt/www.tesco.com

Good luck

Read other 3 answers
RELEVANCY SCORE 32.8

my Brand New 15r with 7 pro accepts everyones wireless except my work. we have a static IP address, modem, router, good internet speed.  If i manually install ip addresses, internet is lighting fast, then they don't stay. then computer labors to get to internet, it does after several "resolving host and try again" comments.  Seems as though i need to uncheck something somewhere.  

A:New 15r will not accept work router

It's not uncommon for some work sites to employ a firewall which restricts/limits the effectiveness/use of personal computers on the site.
 
You might check with the IT point of contact for the site.
 
Louis

Read other 3 answers
RELEVANCY SCORE 32.8

I just tried to login to my HP G6 Pavilion laptop but it won't accept my password.  I have not changed it and I know the password I am using is correct.  I need it urgently but cannot access it.  Can anyone please help? I meant to point out - after starting up I put in the correct and then it starts the 'welcome' script but then quickly reverts to 'password incorrect'!!

Read other answers
RELEVANCY SCORE 32.8

Win 8 pro full in Hyper-V won't accept key. Says win 8 pro is an update version. Show key shows there is a Vista marker in the VM firmware.

Any way round this?

A:Win 8 pro full in Hyper-V won't accept key.

Showkey saying "vista marker" is normal in Hyper-V Vms - it always does.

What is your 8 Pro key? Is it an upgrade from 7? IF so you could follow this Clean Install with Windows 8 Upgrade

Otherwise use the ShowKey option to check your key and see what type it is.

Read other 1 answers
RELEVANCY SCORE 32.8

OK GUYS, I got a wacky one here.

The SITUATION:
One custom built, bought parts from new egg machine, all parts were purchased from new egg! Accept the operating system!

I have ran into this before and I was able to fix it by the not so fun way of getting another 20 buck keyboard.

OK, on initial instal of windows XP pro Service Pack 3 (this CD is one of those "You preload to deliver to a customer you built a machine for") on my custom machine I can easily accept the EULA screen by hitting the F8 key per the norm.

ON another format and repartition I can once again install XP pro on my custom machine and once again easily accept the EULA screen by hitting the F8 key per the norm!

THE BRICK WALL HAPPENS. Once I attempt a 3rd format repartition and Install of Windows XP pro service pack 3, WHEN I attempt to accept the EULA portion of the instal, for some reason, my F8 key on the same keyboard I did the previous instals does not work, I can no longer accept the EULA with that same keyboard.

Now if I plug a completely different keyboard in that has never interfaced with this machine before in, I can then accept that EULA by hitting the F8 key per the norm.

The questions:
1. Is this because this CD is susposed to be used to preload an operating system for delivery to an end client who I have built a machine for?

2. Is this some type of microsoft "Don't you try and use XP pro on more than one machine" deal?

3. The scary one. Do I have some type of har... Read more

A:XP PRO Can't accept EULA on install

You effectively shot yourself in the foot with this question...

You legally can only have one copy of XP installed per licence. Either you wipe clean the previous computer, or you get another licence.

The keyboard problem you describe, though, should not be affected by this. The EULA is brought on far before you initiate any sort of registration.

Either the F8 key is getting some sort of excessive usage and is worn or the keyboard itself is unresponsive. Have you tried that keyboard in another computer?

PS viruses have absolutely no physical effect on hardware devices (except maybe the hard drive, but then only in the form of data).
 

Read other 2 answers
RELEVANCY SCORE 32.8

I cannot get my laptop to accept my password nd also at the bottom right hand side there are three symbols one is internet connection when you press it the response you get is Network no connections are available. How can I get into the laptop 

A:How do I get into my laptop when it does not accept my passw...

Read the following HP document.http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/I-forgot-my-password-can-HP-help...  We can usually help with BIOS power-on and admin passwords, but not with Windows passwords.  You should have created a password reset disk, just in case.   

Read other 1 answers
RELEVANCY SCORE 32.8

Hi guys... It was just this morning when I found that my DVI - HDMI cable was unplugged, it seemed that my Mom was kind of "super cleaning" my room, and she unconsciously removed the cable from my Samsung SyncMaster 2494. When I get to plug it back I find that the computer won't detect the monitor using the DVI - HDMI cable (Which has been used continuously for the past year and a half).

I decided to connect the computer via VGA... Poof, it works... Then I decide to test the DVI - HDMI cable with another device such as my Xbox 360. I plug it in, turn it on, and poof it works! I got astonished thinking that the output of my video card was damaged, and decided to test it with 2 more HDMI capable computers... Each of them DID NOT emit the signal nor detected the display.

I did a reset on the monitor, recycled the power, and I don't know what to do know... My Dell XPS M1530 (8600M GT) won't detect my monitor via HDMI anymore!.....

Help! Thanks XD.

P.S: ATM, besides the 360, I do not own a device which is HDMI capable.

A:Monitor Won't Accept DVI - HDMI PCs but 360 Yes

Try uninstalling all the monitors listed in Device Mangler, shut down the computer, switch cables to the HDMI, then start it back up.

Read other 9 answers
RELEVANCY SCORE 32.8

Hi Folks
I have just purchased a new laptop (toshiba) with win 7 installed at the shop .I brouhgt the machine home ,started it up and let it complete the installation . After all that was complete I let the unit time out & go into sleep mode .When I attempted to get back in my password is not accepted . Any Ideas

A:Win7 won't accept password

I have to ask,
is it the right one?

~Lordbob

Read other 9 answers
RELEVANCY SCORE 32.8

how know if my laptop accept hd sata or not ?

any ideas
thnks
 

A:how know if my laptop accept hd sata?

Read other 10 answers
RELEVANCY SCORE 32.8

I have just noticed that today. I tried to type a URL in the Address Bar but it wouldn't go to that site. I tried to get an address from the History Drop Down list and again it would not go to that URL. The only way to go there is if I have it as a link somewhere.... So I google the site where I want to go and click on the link from within the google page. PITA really.

I also use an addon called FlagFox and not it won't place the flat in the address bar as it used to. I have to have the flag down in the status bar instead.

I have cleared cache and cookies but still the same.

Thanks

A:[SOLVED] FF won't accept any URL in address bar

Hmmmm I guess it is not a common problem. No answers here and nothing on this subject from the FireFox online help.

Read other 8 answers
RELEVANCY SCORE 32.8

A program I use frequently (VuePrint) refuses to let me change the .ini file to a particular opening directory. There is a line in the .ini "Directory=C:\"
I have attempted to change it to "Directory=C:\User1\User\Downloads" to no avail.
I have changed the file logged in as "Administrator" and as the only "User" of the system. Once or twice the change worked, but at next log on, the .ini file had changed back to the original setting.
I have searched the registry and no .ini file reference is there. Yes, I have saved the file using both "Save" and "Save as."
Any help would be appreciated.

A:INI File Refuses To Accept Changes

Some programs only read an .ini file on startup, and write it on exit. If you change the file while the program is running, when the program closes it will write its settings out. This will overwrite your changes.

If that's not what it happening I would try to contact the publishers of the software to find out what the trick is. Perhaps it accepts a command line param to change the setting or some other method.

Read other 5 answers