Over 1 million tech questions and answers.

Origin won't download error Origin.exe - Entry Point Not Found

Q: Origin won't download error Origin.exe - Entry Point Not Found

Hi, can someone please help as EA aren't helping me!

Origin was working fine until yesterday. Then it came up with this error code:

The procedure entry point _except1 could not be located in the dynamic link library C:\Program\Origin\Origin.exe.

So I uninstalled Origin, several times and followed EVERYTHING they told me to do, manual uninstall, do it with no anti virus etc. I even tried to download from a third party website, which did progress more in the installation but still failed with even more error messages!

I have had Microsoft access my computer and they have also tried everything and have confirmed that nothing at all is wrong with my laptop (which is what EA was trying to say).

Its really frustrating now and I hope someone can help please!

I have a Toshiba laptop and I am running windows 10.

It was compatible with windows 10 as it was working for a week or so. It did keep crashing but I changed screen resolution and was fine.

I will appreciate any help, Thanks!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Origin won't download error Origin.exe - Entry Point Not Found

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 95.2

From Origin (or even without origin, just trying to run the game from my desktop alone), I cannot play the Sims 3 or my only expansion pack, the Sims 3 Pets.
I have two other games installed that work completely fine: Plants vs. Zombies and SimCity.

The error happens just a few seconds after trying to launch either of the Sims games, without even opening the launcher. This is what the error message says:
Code:

Sims3LauncherW.exe - Ordinal Not Found

The ordinal 304 could not be located in the dynamic link library iertutil.dll.

Then, after clicking "OK" on the prompt, I get this:

Code:

Sims3Launcher

Sims3Launcher has stopped working
Windows is checking for a solution to the problem...

I have had 5 chats with 5 different people from the Origin online help chat, and as suggested I have tried all of the following, all to which none have solved my problem.
Logged out & back into Origin
"Repaired" games from inside Origin
Restarted my laptop
Manually uninstalled Origin, then reinstalled Origin from the Origin website
Uninstalled the Sims 3 Pets and The Sims 3 (not manually, I would need guidance for that), then reinstalled both
Updated AMD drivers
Installed Windows updates
Clean booted my laptop
Please help!
 

A:Solved: Sims 3 & Sims 3 Pets(Origin) - Ordinal 304 Error (Not Found?)

Bump?
I talked to someone from EA again and was told that the corrupted files are from malware or a virus...
 

Read other 2 answers
RELEVANCY SCORE 94.4

I uninstalled ZoneAlarm Firewalla and now strange things happens...............

rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll

Whenever i log in to windows i get

userinit rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll

winlogon rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll
When i right click "MY PC" i get
rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll

I tried sfc /scannow without any success :/

A:rundll32.exe - Entry point not found The procedure entry point LdrResfindResource could not be located in the dynamic link libr...

You currently have an open Malware Removal Logs citing same issue, http://www.bleepingcomputer.com/forums/topic473316.html .

Since you have the open malware topic, we request that you pursue that and resolve any/all issues there...before proceeding with a topic in a different forum, citing the same issues.

At the conclusion/resolution of your MRL topic...you should then initiate a topic in the appropriate forum for any system issues that you may then have.

To avoid confusion, this topic is now closed.

Louis

Read other 1 answers
RELEVANCY SCORE 94.4

my notebook was super slow: toshiba, pent 4, win xp. Ran Dr. Web cureit, see file:

winlogon.exe;C:\Documents and Settings\All Users\Application Data;Trojan.Packed.365;Deleted.;
RegUBP2b-.reg;C:\Documents and Settings\All Users\Application Data\Spybot - Search & Destroy\Snapshots2;Trojan.StartPage.1505;Deleted.;
A0137147.exe;C:\System Volume Information\_restore{F07DAC61-F7DF-4442-9D87-ABA01D78AFBB}\RP321;Trojan.Packed.365;Deleted.;
A0137148.reg;C:\System Volume Information\_restore{F07DAC61-F7DF-4442-9D87-ABA01D78AFBB}\RP321;Trojan.StartPage.1505;Deleted.;
sdccinfo.dll;C:\WINDOWS\system32;Trojan.Click.origin;Incurable.Moved.;

here is the HiJackthis log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:25:58 PM, on 3/11/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16791)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\Program Files\Hewlett-Packard\HP OfficeJet T Series\bin\ktchnsnk.exe
C:\WINDOWS\System32\00THotkey.exe
C:\WINDOWS\system32\ezSP_Px.exe
C:\Program Files\ESET\ESET Smart Security\egui.exe
C:\Program Files\DrWeb\SpIDerAgent.exe
C:\WINDOWS\system32\TPWRTRAY.EXE
C:\Program Files\TOSHIBA\TouchED\TouchED.Exe
C:\toshiba\ivp\ism\pinger.exe
C:\WINDOWS\system32\ctf... Read more

Read other answers
RELEVANCY SCORE 94

Hey, I'm downloading a game from Origin and my speed has shot up to 12mb/s, now I know that is impossible because the max I can ever get is 2.3mb/s.

Here is my router's page shown next to the download to prove that it is impossible lol.


At first it was downloading at my normal speed but it just gradually went up and then hovered around 8mb/s to 12mb/s for about 5minutes then it went back to normal again around 1.5mb/s.

What happened ? How is this possible ?

Thanks,
Danny K

A:Impossible download speed shown from Origin

This might not be the answer, though I have seen similar events.

Your d/l speed is a little down for your attenuation (but that might be because if the way your modem synchs with your exchange), and would indicate you're about 1.0 - 1.5 km from your exchange (or sub exchange if you use RIMs in the UK). With a SNR of 5.6 you must have good line quality to have a stable connection at that SNR (Typically ISPs aim for an SNR of around 6.0).

When data gets cached you can see speeds that look unrealistic. This data can be cached on your PC (If you have previously downloaded, or started to download something), or at some point close to you.

Eg. Some ISPs cache large amounts of data to give the impression they are providing better services than they really are.

Just my observations. There is probably a better explanation for this.

Read other 3 answers
RELEVANCY SCORE 92.8

I recently installed Battlefield 3 and shortly after the installation Origin downloaded a ~450MB patch for the game. I would like to reinstall the game as I cannot change any of the settings in the game (graphics, key bindings, etc). Unfortunately I live in South Africa where uncapped internet is rather expensive and I am very close to using up all my data for the month. I don't want to download much more for the rest of the month and was wondering if I can access the patch Origin downloaded and manually install it after reinstalling the game. Unless anyone has any other solutions to the menu not working, please enlighten me. I will post a screenshot of what the menu looks like in game, without being able to change anything. Thanks.

 

Read other answers
RELEVANCY SCORE 90.8

Yesterday I bought a Netgear D6300 and setup my network from scratch again. My network: NTU -> Netgear Router -> 16 port TP-link Switch -> Computer 1 and 2.

After I set up the network, my computer stopped being able to connect to Origin, the Blizzard Launcher, and could not retrieve email through Windows Live Mail. In addition, I attempted to download Adobe Flash, and it hung at "Retrieving Download" and closed after timing out.

The odd thing is that my other PC (through the 16 switch too) works with all of these things completely fine. Every other device connected to the network works completely fine but this one.

It is a brand new PC, (only built last week), running an onboard Killer e2200 Ethernet adapter from a MSI-H97-Gaming-3 mobo. I have attempted several things to resolve the issue, including setting the PC as the DMZ, but nothing has worked so far.
Unsuccessful Attempts:
- Set as DMZ
- Disable Windows Firewall
- ipconfig /release -> /renew -> /flushdns
- winsock reset
- no proxies in IE. (Also reset IE to factory default)
- Resetting NTU and Router
- Uninstalling and reinstalling the Network adapter driver
 

A:Can access internet, but unable to download, connect to origin or Blizzard Launcher.

Hi Aelical,

Since the other PC is working fine, we can exclude the switch and router.

Do you have any other firewall software installed?

What antivirus program do you have installed on the problem PC?

----------

It sounds like something is blocking particular ports.

As for Windows Mail, do you use a POP3 or IMAP configuration?
 

Read other 3 answers
RELEVANCY SCORE 89.2

Hi everyone!
This Post may be long but I want to give as much detail as possible. I believe I followed the steps correctly but if I didn't PLEASE let me know. :)

Okay, so here goes.
This is my problem: When I boot up my computer (Dell Dimension 4600 Desktop running windows XP (I'm not sure if any of that matters)) I receive a box with a blue heading that reads "ViewMgr.exe - Entry Point Not Found." The ViewMgr.exe is also sometimes replaced with QTTask.exe, GoogleToolbarNotifier.exe, Jusched.exe, hpcmpmgr.exe, AdobeCollabSync.exe, or Autolt v3: dss.exe. The message inside the window that pops up when I boot reads "The procedure SHRegGetValueW could not be located in the dynamic link library SHLWAPI.dll." This message is then followed by an ok clicker box. when I click ok it just pops up the window again with one of the other labels in the blue heading. My system is running super slow and I cannot run many programs that would let me fix this problem. I ran sfc /scannow through the windows run program and that didn't fix anything either. Such as I cannot update my Avast! Antivirus because my computer will not run the program.

When I did the Five steps before posting this is what happened:
Step 1: I could delete all of the programs that I was infected with except View Point Manager (Remove Only).
Step 2: I use Firefox and not Internet Explorer so it would not let me install PandaActiveScan because you must have Internet Explorer to download that. ... Read more

A:Entry Point Not Found Error

Bump.

Read other 19 answers
RELEVANCY SCORE 89.2

when i start any program
it says
Error entry point not found
but when i click ok then the program
starts
heres the picture please help

sorry about the small picture
it was 3mb soo i had to make it smaller

A:ERROR Entry point not found

Try this.

Go Start > Run > Type in sfc /scannow. It may ask for your XP CD - just insert it and let it go.

Let me know the results.

Good luck,

-Coolfreak

Read other 3 answers
RELEVANCY SCORE 89.2

when i start any program
it says
Error entry point not found
but when i click ok then the program
starts

Coolfreak said:
It seems that launcher.exe might be malware - so to be safe at this point, I am going to have an expert revise your system and be sure you are clean of any malware. If the experts verify your system is clean, we can then help you further

DDS (Ver_09-06-26.01) - NTFSx86
Run by [email protected] at 8:49:23,82 on ned 05.07.2009
Internet Explorer: 6.0.2900.2180 BrowserJavaVersion: 1.6.0_13
Microsoft Windows XP Professional 5.1.2600.2.1250.385.1033.18.1013.510 [GMT 2:00]

AV: Kaspersky Anti-Virus *On-access scanning enabled* (Updated) {2C4D4BC6-0793-4956-A9F9-E252435469C0}

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\PAStiSvc.exe
C:\WINDOWS\system32\svchost.exe -k imgsvc
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\igfxpers.exe
C:\WINDOWS\RTHDCPL.EXE
C:\WINDOWS\system32\igfxsrvc.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\System32\svchost.exe -k HTTPFilter
C:\Program Files\Windows Live\Messenger\msnmsgr.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Windows Live\Contact... Read more

A:ERROR entry point not found

Hello and welcome to TSF.

Apologies for the long delay in response. Since it has been a while you posted, if you still require assistance, please provide us with a new set of logs in a new topic as this one shall be closed.

New Instructions - Read This Before Posting for Malware Removal Help

Read other 1 answers
RELEVANCY SCORE 89.2

hi

every few minutes, a error window appeares (irritating ):

Title: "200731421111_mcinfo.exe - Entry Point Not Found

The Procedure entry point getaddrinfo could not be located in the dynamic link library WS2_32.dll.

Button: OK"



ive searched the ws2_32.dll file, and it was found in 3 different windowsfolders.
ive also searched google. but there wasnt any info i could use.
i asked a friend, and he told me McAffee was the problem.
Because a while ago, i deinstalled mcaffee and installed avg antivirus instead.

can somebody please help me? it's really irritating.
else the only solution is to format the drive and reinstall windows.

thx,
Yellow Fellow

Windows XP
Pentium4 1.5 Ghz 256kb cache
640 mb sdram
Geforce 440 MX 64 mb
20GB + 10 GB
AVG antivirus

A:Error Entry Point Not Found

Hi yellowfellow, welcome to BC.Your friend is correct. mcinfo.exe is part of the McAfee security suite.You may see that entry in msconfig and can disable it at startup.Before you do that though, are there any more mcafee products listed in Add\Remove?There are seperate removal tools available for each part of the security suite here.If you use the full product uninstaller, it will remove everything, including the firewall.You will want to have one pre-downloaded ready to go (but don't install until mcafee has been removed and you are physicly disconnected from the internet).Let us know.

Read other 6 answers
RELEVANCY SCORE 89.2

Can anyone give me a clue as to how I get rid of an entry point error I keep getting every time I boot into Windows XP Pro. I don't know where this came from and I have reached the end of my rope in trying to get rid of it. The error reads as follows:

hpqSTE08.exe - Entry Point Not Found
The procedure entry point ?Set Tool Tip [email protected]@@[email protected]@[email protected] could not be located in the dynamic link library hpqmfc09.dll.

I've tried replacing the .dll with a new, downloaded one, but to no avail. After I click OK on the error, the computer seems to be frunning okay. However, the error message is annoying and I would like to get rid of it. Anybody....help, please. Thanks.

Robert
 

A:Entry Point Not Found Error

Any problems with your HP printer?

You might try completely uninstalling it and reinstalling the most recent driver.

NEVER download dll's from the net. A lot are infected, they exist in multiple versions and many different ones have the same name. They could cause problems with other dll's in an OLE object that they are linked to. They used to call it "DLL H***". It could make you wish you hadn't.

If that doesn't help (and I think it will), run Autoruns. Look for references to that dll or "regsvr32".
 

Read other 1 answers
RELEVANCY SCORE 89.2

When installing the newest version of AIM on winxp - after the installation I get this error:

GLJ3.tmp - Entry Point Not Found
The procedure entry point [email protected]@@[email protected] could not be located in the dynamic link library xmlparse.dll

AIM seems to work after that though.

Can anyone help?!
 

Read other answers
RELEVANCY SCORE 88

After successful upgrading to Windows 8.1 Pro with WMC, every now and then a window pops up saying
Code:
"RCF.EXE Error. Entry Point not found. The Procedure Entry point InternetSetCookieExW could not be located in the dynamic link library C:\WINDOWS\SYSTEM32\urlmon.dll".


What is this ? I have also re-registered urlmon.dll with 'regsvr32 urlmon.dll' command. No errors while registering.

Please help me to get rid off this pop-up.

A:RCF.EXE Error. Entry Point not Found, after upgrading.

The rcf.exe pertains to my antivirus program - NetProtector. I tried uninstalling and reinstalling it, but the problem persisted. So now I have completely removed it and the problem is no more. No more pop ups.

Read other 1 answers
RELEVANCY SCORE 88

Title at the top of the window error box: AppleSyncNotifier.exe- Entry Point Not Found
The Error reads: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Using Windows 7 Home Premium
Model HP Pavilion g6 Notebook PC
64-bit
This error appears only on start up. Once I click Ok, it doesn't appear until the next start up. Any thoughts...
Buck
 

Read other answers
RELEVANCY SCORE 88

Hey everyone!

I have a Dell Dimension desktop running Windows XP home, and for the last few weeks I have been receiving the following error message when I first start the computer. (See attachment for screenshot)

___________

regsrv32.exe - Entry Point Not Found:

The procedure entry point [email protected] could not be locate din the dynamic link library regsrv32.dll.

____________

I have run a virus scanning program and cleared all spyware with ad-aware and spybot, but I still receive the error. I opened task manager and the process associated with this error message is "csrss.exe." The search function revealed two locations of this file on the affected computer and none on a non-affected computer: "C:\i386" and "C:\windows\system32."

I moved both files to a temporary location, but it did not solve the problem; I still get the error message every time I start the computer.

Any advice would be GREATLY appreciated. It doesn't cause problems, but I want the computer to be working correctly. Thanks so much in advance!

-Micky
 

A:Error Message: Entry Point Not Found???

I saw this at MS's knowledge base but it was for other files (not regsrv) but it said that it was caused by file versions that were wrong.

The first thing I would try is to run the system file checker (Start, run, "sfc /scannow" [without the quotes] - be sure to have your install CD ready).

Other than that I'm not sure.

Prime
 

Read other 2 answers
RELEVANCY SCORE 88

Hello members

I have just into extreme pressure of this problem right now.

Here is what happens:-

Window loads--> loading personal setting--> Then it shows a box :-
VisualToolTip.exe - Entry Point Not Found
The procedure entry point GetProcessImageFileNameA could not be located in the dynamic library PSAPI.DLL

the above box has OK button.. but the weird thing is the mouse doesn't work. It moves around but clicking function is not working. The keyboard is dead. It is also not working. I tried with two other working keyboard but same results..

I tried to go to Safe Mode, but when the pc starts for the first time, keyword is 'on' and later after few seconds the 'on' indicator in keyword turns off and F8 button doesnt work. It turns on when the window is loaded but I can not press any key to work on. The window is simply shows the message above and I am not able to do anything with it.

I thought of formatting, but when pc loads from CD, and ask to press any key... I can not press any KEY........

I have seen many problem and have solved them myself but this one I can not do anything and I feel like I am locked out.
Please help me soon guys!

Thanks for your time!

Read other answers
RELEVANCY SCORE 88

Hi to all,
I have a Notebook Acer Travelmate 3010 with Windows XP Pro.I have been receiving the following error message when I first start the computer

RtkBtMnt.exe - Entry Point Not Found
The procedure entry point setupdienumdeviceinterfaces could not be located in the dynamic link library SETUPAPI.dll.

Please help me.
 

A:Error message: Entry Point Not Found ?

this file is part of the set for the onboard realtek sound card. It has probably be caused by a recent windows update. I posted a note about this a few days ago but cannot find it now - sorry!
I suggest you download all the available windows updates and run them - there is a second update which corrects the first one.
 

Read other 11 answers
RELEVANCY SCORE 88

I keep getting the following popup:
Sprtcmd.exe - Entry Point Not Found: the procedure entry point DOOPENPIPESTREAM could not be located in the dynamic link library ScrRun.dll

Can anyone tell me how to stop this popup error? It keeps happening over and over...

A:Sprtcmd.exe - Entry Point Not Found error

hello & welcome to TSF ,

do you have a Windows Xp cd, not the restore cd's that come with some systems, the cd will have the Windows logo & 3D hollowgram/image on it

if you do not maybe you can barrow one from a friend/family member/co-worker as long as it is the same version that is on your system

if you have (Windows XP Home Ed. sp2 ) then the cd will have to be that / if you have a cd with (Windows XP Home Ed. )you will have to sliptream (SP2 ) onto a disk that you create

this also applies to (Windows XP Professsional )

http://www.helpwithwindows.com/Windo...p2-bootcd.html

now if you do have the Windows XP cd with sp2 please follow these steps

--------------------------------------------

performing a (sfc) system file checker

It is a scan that checks the core files & dlls of the (os) operating system and replaces them if they are corrupt or missing with the correct original version

start

#1 then select (run) , then press enter
a window will open
#2 type in ( cmd ) then press enter
another window will open
#3 type in ( sfc )then press enter
another window will open
#4 type in (sfc /scannow ) then press enter ( notice the space between the (sfc & /)

now a scan will start , have your (Windows XP software disk ready ) your pc may ask for this disc when it starts or during the scan( so you must sit with the pc while this scan functions ) , if it does then incert the cd into one of your cd/rom/player's , you... Read more

Read other 19 answers
RELEVANCY SCORE 87.2

When trying to run the System Restore we got an Entry Point Not Found Error
RemoteAssistancePrepareSystemRestore could not be located in the dynamic link library winsta.dll.

Help please
 

A:System Restore Entry Point Not Found Error

Try the system file checker:
Go to the Run box on the Start Menu and type in:

sfc /scannow Note: space between c and /
You may need the windows xp CD
 

Read other 2 answers
RELEVANCY SCORE 87.2

When logging as any user, this UserLogon.exe error message appears:

UsrLogon.exe - Entry Point Not Found
The procedure entry point RichEdit10ABSIWndProc could not be located in the dynamic link library RICHED20.DLL

Although it has no effect on further operation of the machine, this error persists every time at logon. Please advise if you have any info regarding the slution. Thanks!

 

A:Win2k Pro error ----- UserLogon.exe - Entry Point Not Found

Do you have a program called RichEdit or something similar? This error message points to a problem with a program named something like this. Do you have any apps in your startup folder that launch automatically at login? One of them could be referencing this file.
 

Read other 1 answers
RELEVANCY SCORE 87.2

Thanks for taking the time to look at my post. I am using Windows XP on a Dell Dimension 4550 Pentium 4 computer. I scan for viruses and Spyware as best I know. When I click on a user I get the following Error Message.

"Direct CD. EXE-Entry Point Not Found" (on the top left of the small window)

and

The procedure point Cdudf_IsMedaBlank could not be located in the dynamic link library ( in the window with an "OK" button)

I have no idea what this means. I am recently having problems with the computer and I thought I would start with this. Aside from being unusually slower, every once in a while, in the middle of surfing or using word or excell, the screen goes blank and returns to the user log on screen.

All and any help is greatly appreciated.

Candy from Chicago
 

A:Error Message: Direct CD.EXE-Entry Point Not Found

Hiya and welcome

Are you using DirectCD from Roxio? If so, have you tried uninstalling/reinstalling the software? It may have become corrupt somehow.

Also, can you post a log as well:

go to http://forum.aumha.org/downloads/hijackthis.zip , and download 'Hijack This!'.
Unzip, doubleclick HijackThis.exe, and hit "Scan".

When the scan is finished, the "Scan" button will change into a "Save Log" button.
Press that, save the log somewhere, and please copy & paste its contents to the forum.

It will possibly show other issues deserving our attention, but most of what it lists will be harmless or even required, so do NOT fix anything yet.
Someone here will be happy to help you analyze the results.

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 86.4

I've been getting the BSOD sporadically for quite some time now and I am finally fed up.

Here is the STOP error information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 4e
BCP1: 0000000000000007
BCP2: 000000000021DD10
BCP3: 0000000000000001
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\011112-30654-01.dmp
C:\Users\Dustin\AppData\Local\Temp\WER-54600-0.sysdata.xml
I've attached the dump file referenced above.

Here are some details on my machine:
Gateway DX4300
AMD Phenom(tm) II X4 810 Processor 2.60 GHz
8GB RAM
Windows 7 - 64-bit, full-retail
Hardware purchased in 2010, Windows 7 upgrade occurred early 2011
Not sure what the cause is, any help is greatly appreciated.

Also, there are a ton of files in my minidump in addition to the one attached, is this normal?

thanks in advance,
Dustin

A:BSOD unknown origin, error 0x0000004e

I've updated my thread to include the files requested in BSOD requirements page.

Read other 6 answers
RELEVANCY SCORE 86.4

Okay, the title sounds vague, but I can give more information.

I am currently running Windows Vista on my HP Pavilion laptop. About a month ago, I started having an issue when Vista launched. After all of the pre-load process had finished executing, I got a message that said that Windows Explorer had stopped responding, and was restarting. Then a whole slew of programs and Windows services went through the same process. Everything from McAfee to my touchpad management software either restarted or stopped all together, and then the computer rebooted.

Now whenever I start up the computer, I still get the same problem with the following two processes: Windows Explorer, and Task Scheduler Engine. The computer does not go into a forced reboot anymore.

Certain programs have not worked properly since. The most notable are IE, Windows Live Messenger, and Yahoo Messenger. IE behaves like I have no active connection, and I can't sign into either of the messengers. Oddly enough, Firefox works just fine - no problems connecting to the net and opening pages.

As I am the only one who uses this computer, I have no idea where this could have come from.

If anyone has any suggestions, please let me know.
 

Read other answers
RELEVANCY SCORE 86.4

I'm experiencing an issue every time I open Windows Live Mail 2012 on my Windows 7 PC.

As it starts up it throws up the following error message:

"Outlook Express FolderSync Window Class: wlmail.exe - Entry Point Not Found

The procedure entry point _crtCreateSymbolicLinkW could not be located in the dynamic library MSVCR110.dll."

After I click OK to this, the message will repeat half a dozen to so times but eventually Live Mail will open and run normally (or so it seems).

I've run anti-virus and anti-malware software in case I'd picked up something malicious that was interfering with Live Mail, but found no relevant results. I've also run maintenance programs to check for corrupted files or bad sectors on the HDD (etc) that might mean the needed file is unreachable, but found nothing.

Finally, I tried un-installing Live Mail and then re-installing it in the hopes that this would replace the unfindable file, but again this had no effect.

At this point, I don't know what else I can try to resolve this issue. Can someone please give me some suggestions what to try next? Thanks.
 

Read other answers
RELEVANCY SCORE 86.4

started my computer, win xp home, windows xp screen comes up then got error message

"Lsass.exe entry point not found. The procedure entry point DSCrackSpn3W could not be located in the dynamic link library NTDSAPI.dll"

I press Okay and get a black screen, but the cursor still works. Before I take to it with a sharpened implement, (soooo had enuff of windows!!) can anyone of you lovely folks recommend anything?
 

A:error message on startup, Lsass.exe entry point not found

Sounds like the knowledge base article here might help you out.
 

Read other 1 answers
RELEVANCY SCORE 86.4

I am fixing my Grandad's computer which runs on Windows XP Professional, Version 2002, Service Pack 3.

Whenever I start up the computer, the following error message appears:

W2SCLDR2.exe - Entry point not found
The procedure entry point apsGetReady could not be located in the dynamic link library wlanapi.dll
OKClick to expand...

That's all the relevant information I think I have. All I can gather from doing Google searches is that it might be something to do with the registry, but other than that I haven't been able to find much. Most of the results I've looked at seem to be completely useless and unhelpful as to finding a solution, they all seem to be trying to sell some software to fix it, so I've come here.

Thanks.
 

A:Error message on startup: W2SCLDR2.exe - Entry point not found

Read other 7 answers
RELEVANCY SCORE 85.6

I've gotten the BSOD three times over three weeks for no apparent reason. I haven't installed any new hardware or software recently, either.

When I ran my report, it said 44% of my events were missing and that I should investigate it. I have no idea how to do that, unfortunately. It also said that I have no anti-virus, but I do (Avast!).

I have attached my System Health Report and filled out my System Specs to the best of my ability. I am no computer tech, but I'm not a noob, either. If you need anything else from me, please guide me in the right direction.

Thanks in advance for any help!

A:BSOD 3x in 3 weeks, unkown origin, error 0x0000003b

All three say a system service got bugged out by the same exact instruction attempting to use an invalid memory address to read memory with. The faulting service was AWWService.exe, which is part of Ad-Aware. I reckon this is in conflict with your Avast, as it's not wise to have two AV engines running simultaneously like this as they could trip over each other. You can try and update both Avast and Ad-Aware, but the best thing to do is stick with leaving one on (preferably Avast) and leave the other off, only to use it for the occasional scan.

Read other 4 answers
RELEVANCY SCORE 84.4

Above error message apperars every time computer powers up. Just a nuisance or should it be removed?

A:Error message: Smart bridge alerts:MotiveSB.exe entry point not found

This may help cecilia, http://www.techsupportforum.com/f10/...nd-165200.html.

Read other 1 answers
RELEVANCY SCORE 83.6

Hello guys

( I have tried to ask this to other forums, but yet no help!)
I have just into extreme pressure of this problem right now.

Here is what happens:-

Window loads--> loading personal setting--> Then it shows a box :-

VisualToolTip.exe - Entry Point Not Found
The procedure entry point GetProcessImageFileNameA could not be located in the dynamic library PSAPI.DLL

I tried to click OK and after sometime, I can not click anywhere. Even my keyword doesn't work anymore.

I tried to go to Safe Mode, but F8 key is not working because keyboard turns off during the boot. And it is turned on when after window is loaded... then the message comes up and then stays there forever. The only key works is the Start Up key, but no other keys work.

I thought of formatting, but when pc loads from CD and asks to press any key... I can not press any KEY........

I have seen many problem and have solved them myself but this one I can not do anything and I feel like I am locked out.

Please help me guys! Help!!!

Thanks for your time!

A:VisualToolTip.exe Entry Point Not Found error :- Computer Hangs + Mouse and Keyboard not working!

Hi netme, and welcome to BleepingComputer.If would help if you were to post the make and model of this computer.If it is a custom build, please post the make and model of the motherboard.Have you tried using a different keyboard?Microsoft has a work around for this, but you need the use of your keyboard. You can read the article here.

Read other 14 answers
RELEVANCY SCORE 83.6

I loaded up explorer and opened up my C:/ drive to start a game in my program files, accidentally pressing "Downloads" finding this file there, my operating system is Swedish so the folder should be named "Hämtningar" (Swedish for downloads). The file is 93 kb in size and was created on the 27th january, there is also an account named "Unknown account(S-1-5-21-a bunch of numbers)" with total control, I also have no ability to remove it. I would like some help with this, malwarebytes also doesn't react on it. I've also noticed I'm unable to visit Bing (not like I use it, but still weird) with the access denied error.

A:I found an unknown files called myfile.exe, origin unknown.

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2. SecurityCheck may produce some false warning(s), so leave the results reading to me.NOTE 3. If you receive UNSUPPORTED OPERATING SYSTEM! ABORTED! message restart computer and Security Check should run Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware (MBAM) to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click ... Read more

Read other 23 answers
RELEVANCY SCORE 83.2

Thanks in advance for any assistance you may be able to provide.I am running XP MCE SP3 and I've recently upgraded to Zone Alarm Extreme Security. Updates to both have been well maintained for years. When I upgraded ZAExtreme I allowed it to operate in "learn" mode. I then, after forgetting this fact, fired up my machine at a local StarBucks and did some work. Shortly thereafter I started to get the following error message:"The True Vector Internet Monitor has shut down. Do you wish to restart it?"Restarting the True Vector service simply results in the same message popping up a few moments later. The ZA UI reports that firewall and AV are disabled.I followed the instructions on the following ZA forum thread:http://forums.zonealarm.com/showthread.php?t=70616- Safemode ZA deep scan found nothing.- MBAM found nothing.- SuperAnitspyware found some tracking cookies and ten "Malware.Installer-Pkg/Gen" entries in a WildTangent subdirectory with names like {6B6A7665-DB48-4762-AB5D-BEEB9E1CD7FA}.EXE (I think I deleted all of these). - I did not run A2 Free- Dr. Web LiveCD scan detected the PWSBANKER.origin (PSW? I may have transcribed incorrectly), and the downloader. It reported these as "incurable" so I told it to delete them - which it did. I have since rebooted and re-run the Dr. Web scan and it now finds nothing.I ran chkdsk this morning (although I didn't reboot into safe mode to run it). It generated six messages as follows:" Deleting index entry from $0 of file 180... Read more

A:Infected Trojan PWSBANKER.origin, Trojan download.38959

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 4 answers
RELEVANCY SCORE 82

windows 7 system Samsung

tried to download google earth and never did finish download, but now every time switch websites it gives this message top bar says java script message displays Error Exposing privileged or cross origin callable is prohibited.

I have already restored to date previous of download with no change. I will try to get the info with above download.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3882 Mb
Graphics Card: NVIDIA GeForce 310M, 512 Mb
Hard Drives: C: Total - 238591 MB, Free - 114132 MB; D: Total - 355570 MB, Free - 321092 MB;
Motherboard: SAMSUNG ELECTRONICS CO., LTD., QX310/QX410/QX510/SF310/SF410/SF510
Antivirus: Norton Security Suite, Updated and Enabled
 

A:java script message- error-Exposing privileged or cross origin callable is prohibited

You don't need to post three times, continue here: http://forums.techguy.org/web-email/1147172-java-script-message-error-exposing.html
 

Read other 1 answers
RELEVANCY SCORE 82

windows 7 system Samsung

tried to download google earth and never did finish download, but now every time switch websites it gives this message top bar says java script message displays Error Exposing privileged or cross origin callable is prohibited.

I have already restored to date previous of download with no change. I will try to get the info with above download.
 

A:java script message- error-Exposing privileged or cross origin callable is prohibited

What browser and version of the browser are you using?
Have you tried another browser?

I have a least 2 browsers on all our computers to test websites.

So what is throwing the error, Java or Javascript? Note these are two very different things. Or are you getting two errors on every website?
 

Read other 1 answers
RELEVANCY SCORE 78

I started to have an error recently and it's very annoying and I can't get rid of it. I suppose it is connected to some .net framework stuff or something related.
Windows 7 x86.
It reads:

"x_process.exe - Entry Point Not Found
The procedure entry point I_RpcBindingSetPrivateOption could not be located in the dynamic link library RPCRT4.dll."

x_process can be different and so far it varied as Fences.exe (it's a Stardock Fences application I used for a long time), MOM.exe and CCC.exe (which are amd video card related processes) and they pop out multiple times at a windows startup and also almost at every full screen application start too, it gets very annoying and sometimes it pops out pretty randomly while watching something etc.
Mostly its Fences.exe that gives me this error frequently. It never happened before.
I THINK it supposedly started after I installed couple of games and they also brought some c++ distributable installations with them, one 2010 and another 2012, I actually already even deleted them too. And I repaired my .net framework 4.5. Nothing changed, still have the error. I used the .net framework integrity check tool as well, all good, all verified. Google hasn't helped much too. And I don't see any visual basic installed on my pc, which is the culprit in many similar cases.
I also checked my OS HDD for errors, it's all ok. Used sfc /scannow and no errors. System restore haven't helped too. DLL suite found a lot... Read more

A:"Entry Point Not Found" Error (RPCRT4.dll)

Read other 6 answers
RELEVANCY SCORE 78

I cant load desktop and when i log in to my account it says "Explorer.EXE - Entry Point Not Found" & "The procedure entry point strcpy_s could not be located in the dynamic link library msvcrt.dll"

only thing i can do is alt+ctrl+del and open cmd for example. i tried to win xp recovery but i dont have the cd cuz its lost... please help :(

A:Error on start up "Entry Point Not Found"

Press CTRL+ALT+ESC to enter the Task Manager. Go up to File/New Task (Run) and type SFC /scannow and press enter. Put the XP CD in and it will replace any missing or corrupted files from the CD.

Read other 2 answers
RELEVANCY SCORE 77.2

Hi guys,

Basically I've acquired an old PC from a friend, I don't really know a great deal about the computer except that it is an Winfast motherboard with an AMD 64 Athlon processor.

I've been trying to fix the PC but when I try to do a clean install of Windows 7 Ultimate from a disc the computer repeatedly crashes and shuts down after copying files reaches 100% or before.

I have also tried to load a Windows 8 installer and a Ubuntu live CD, but it still seems to crash after running for a while.

I have feeling that it may be an error relating to the graphics/video card, (which is intergrated into the motherboard). Because sometimes the screen shows just lines. I tried playing with the bios once (pheonix bios) but this stopped it from booting and gave the post beeps to tell me there was a problem with the video card. However I reset the CMOS on the motherboard and it now boots but still crashes when trying to install windows 7.

Are there any other ways around this? i.e. disabling the video card manually, or any other solutions? Kinda hoping this isn't a hardware related problem.
Thanks in advance!

A:Boot error, unknown origin, ideas to make this computer boot?

Is the Windows Ultimate disc a retail copy? Or a burned disc? Or?

Is it a 64-bit disc?

I have never heard of the Winfast motherboard brand. It may be too old to support this version of Windows?

Read other 9 answers
RELEVANCY SCORE 77.2

rundll32.exe - entry point not found!
Click to expand...


the procedure entry point GetProcessImageFileNameW could not be loacated in the dynamic line library PSAPI.DLL
Click to expand...
well this message always come up in most of the program i open!
the message started to come out when i accidently install the the window nt driver ( 3d card driver[ msi 8800 tnt 2 m64 ]) in my window xp sp2?

but it always caosing the program to not reponding!!
making my head big!
Some one know how to fix it...
i already uninstall the driver.. and intall the right driver!!
but the problem still there!!

or there is something happend.. and i dont know??
 

A:Entry point not found

just looked on google says run all anti spy u have if still no good try start run type sfc /scannow may ask u 4 windows disc if u do not have it available on c drive
 

Read other 1 answers
RELEVANCY SCORE 77.2

Hi everyone,

I keep getting this error message when I boot up occasionally. It says-

"The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library C:\Program Files(x86)\Norton Security\Engine64\22.7.1.32\MSVCP110.dll"

The image shows what I see on my desktop immediately after I enter my password.

Does anyone have any idea how I could go about this? It doesn't seem to affect the general running of my PC.
Thanks in advance.

Read other answers
RELEVANCY SCORE 77.2

After the Windows 8 Update, I get the following message when I log in;

dwm.exe - Entry Point Not Found

[red circle with white x in it]

The procedure entry point CheckDesktopByThreadId could not be
located in the dynamic link library C:\WINDOWS\system32\dwm.exe.

A few days before update I installed Office 2013 Preview.
I use Windows8 since the consumer preview without problems on my Lenovo S10-3 with the following specs;
Intel Atom dual core processor @ ~1,7GHz
1GB RAM
Much more isn't in it XD.

I had also made some small changes in the Registry to change the max resolution, but I did that in June and I didn't had any problems with my laptop until now.

A:dwm.exe - Entry Point Not Found

Someone? It happened after the October update.

Read other 4 answers
RELEVANCY SCORE 77.2

Left my computer on earlier today when I went out and came back to a prompt on the screen saying

ihf.exe - Entry Point Not Found
The procedure entry point MSWSOCK.MigrateWinsockConfiguration could not be located in the dynamic link libraby WSOCK32.dll.

None of the programs I have tried to run will work and the computer won't even connect to the internet.

Please help...

A:ihf.exe - Entry Point Not Found

Hello fastred04R1 Can you download and eun these off a Flash drive or CD?Save mbam-setup.exe to a flash,usb,jump drive or CD. Now transfer it to the infected machine, then install and run the program. If you cannot transfer to or install on the infected machine, try running the setup (installation) file directly from the flash drive or CD by double-clicking on mbam-setup.exe so it will install on the hard drive.Full instructionsNext run MBAM (MalwareBytes):Please download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1 <<<== Use this one first.Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically u... Read more

Read other 10 answers
RELEVANCY SCORE 77.2

I keep on getting a popup everytime I turn on the computer... That reads ONENOTEM.EXE Entry Point not Found.
The procedure entry point OpenSemaphoreW could not be located in the dynamic link library api-ms-win-core-synch--I1-2-0.dll.

What does this message mean and how can I fix it. I tried fixing my computer in the startup options and I also installed a new OS. However this problem is still here. Thank you!

Read other answers
RELEVANCY SCORE 77.2

When I turn on my computer I get a Smart Bridge Alert:Motive SB-Entry point not found. The procedure entry point Get Process Image File Name W could not be located in the dynamic link library PSAPI.DLL

A:SB-Entry point not found

You can download and run diagnostics from your hard drive manufacturer to rule out drive failure . . suggest you first back up any data your cherish

Read other 2 answers
RELEVANCY SCORE 77.2

Eh... yeah, this is bad. I don't have a good feeling about this. So yesterday, I went to bed fine, my computer was great. I leave it running usually. I wake up... I can use everything normally, that was opened. I didn't try to run a new .exe file.

So I was using Firefox fine, and msn too. Then, I wanted to watch a video with media player classic, and I get an entry point not found error. Notibly I was concerned, but I figured it was just a corrupted file within the realm of the media player, not my computer.

So, I decided to try and open up taskmanager. As soon as I do, this is the error I get "

The procedure entry point NdrtypgUnmarshall could not be located in the dynamic link library RPCRT4.dll." Also, something to note, is that if I click okay on the error, it just pops back up, so I can't get rid of it. My cursor has also returned to the original version, (I'm using cursorXP).

I went to system32 to check if I still had the .dll file, or if it had somehow been edited, and nope, it's still there, and it seems untouched. What on earth is going on? How can such a huge error pop up overnight without me doing anything?

Also one more thing, some programs that are already open, such as AVG, will not give me an error when I try to run something within them, merely nothing will happen. I can't use my control panel, either...

Also note that I am using windows xp professional
 

A:Entry point not found

Read other 16 answers
RELEVANCY SCORE 77.2

The message I'm getting is the following
Norton Antivirus:navapw32.exe-Entry Point Not Found
the proceure enrty point? [email protected]@[email protected] could not be located in the dynamic link library SymRedir.dll.

This when my windows(xp) is starting back up.
Can someone help????
 

A:Entry Point Not Found

Here's Symantec's solution (I found this by using Google and searching for "[email protected]@[email protected]").

http://service1.symantec.com/SUPPORT/nav.nsf/docid/2001091211120006&src=n
 

Read other 1 answers
RELEVANCY SCORE 77.2

I uninstalled some software (Media Shout) then reinstalled it. When I tried to start the program I got the following error:

Entry Point Not Found
The procedure entry point [email protected]@@[email protected]@@Z could not be located in the dynamic link library ExplorerExt.dll

Did a Google search for the ExplorerExt.dll and found nothing. Any ideas as to what caused this error, or how to fix it?

Thanks,
 

A:Entry Point Not Found

Hiya

Did you uninstall it due to any problems with the program?

When you uninstalled Media Shout, did you delete the folder in the Program Files, via Windows Explorer? If not, uninstall again, delete it (leave in Recycle bin), reboot and install again.

If still no joy, if you go to Find Files and Folders, can you find ExplorerExt.dll?

Regards

eddie
 

Read other 1 answers