Over 1 million tech questions and answers.

Solved: IP Address of NEC NTA-3110 ADSL modem

Q: Solved: IP Address of NEC NTA-3110 ADSL modem

I'm trying to get Ubuntu 8.04 online and to do this I need to know the private IP address of my modem, which is an NEC NTA-3110 ADSL.

The problem is that my network card is detecting a private IP address automatically (169.x.x.x) and this is not quite in the range that I would expect. Normally it is in the 192.168.x.x range. The reason it is doing this is because the router is not offering any private IP addresses.

I've googled extensively. I know this information should be in the documentation or the manual, but the ISP gave me neither. I know I should ask the ISP but they won't have anything to do with Linux. They just tell you to run the Windows set up disk.

If anyone could offer any help on this, I'd appreciate it very much.

RELEVANCY SCORE 200
Preferred Solution: Solved: IP Address of NEC NTA-3110 ADSL modem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: IP Address of NEC NTA-3110 ADSL modem

Read other 8 answers
RELEVANCY SCORE 85.6

Hi everyone, having a frustrating night getting my ADSL2+ connection going. Just got a Billion 7402G modem/router delivered and I am trying to get it working on an XP PC.

My NIC card works fine, and has the latest drivers. I plug in the modem as described in the manual, and follow all configuration instructions including - Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.

But I am not being issued an IP address. The manual says this should just be automatic and has no recourse if it is not.

I set an IP address manually within the range of the router, and was able to logon to the modem via the webgui. But no internet access.
Billion support tells me "You should only need to login to router with default settings, navigate to Quick Start page, enter your ISP login details & apply, router should then connect, when finished save config to flash. Nothing else should be required, computer should automatically connect. Ensure that software firewalls aren't blocking access."

OK, so to do this, I need to put in the manual IP address... why is the manual saying to set my LAN connection to obtain IP and DNS setting automatically,and why is this not working for me? Anyway I change the settings to manual and reboot, try the suggestion. All firewalls are disabled.

I have now manually entered an IP address for my PC that allows me to login to the router. Without doing this I cannot even get to this setup pag... Read more

A:Solved: My ADSL modem is not giving an IP address

Read other 10 answers
RELEVANCY SCORE 66.4

Hi, my friend is in Japan, and he's signed up for NTT's ADSL service, They say he can 'rent' a modem, but he would need to get a router too if he wishes to use more computers. However he doesn't want a 'multi-box' solution, he wants it in 1 box (like in other countries), a combination ADSL Router/Modem with Wifi. However, he cannot buy them in a few computer stores he has visited. I am visiting him soon, and we're trying to understand if I bring over an ADSL router, if that would work.. I know about the power limitations, but that aside, can it work?

ps. Thinking of bringing something like the following models ( I will purchase once I know for sure )...
Netgear DG834GT 108Mbps Wireless ADSL Modem
Belkin ADSL Modem with Built-in 125g Wireless Router
Linksys by Cisco WAG54GS Wireless-G ADSL Modem Router

pps. I see a lot of modems listed on Amazon with ADSL2, I don't think they have ADSL2 in Japan (according to wikipedia), would ADSL2 modem work with ADSL.?

MANY MANY Thanks if anyone can answer this
 

A:Can an ADSL Wireless Modem Router work with NTT's ADSL service in Japan

Read other 6 answers
RELEVANCY SCORE 65.2

I've currently got a 512kb/s adsl connection but will be moving to a faster 1mb/s connection in next 2 months.In meantime I need to get my other PC to share same connection. So must be wireless. As I understand it a 4 port wireless adsl router means that basically you have an adsl modem that not only controls upload/download link to the internet but lets u plug in 4 PC's hardwired into modem? and then as well as that connect wirelessly?

I'm only looking to connect two PC's to it...one hardwired in and the other wireless equipped with a USB wireless stick.

Would this be suitable?

http://www.ndo.com/ndo/Products/Voyager_2100_ADSL_4_Port_and_Wireless_Router_(802.11g)/prdvoy2100router.html
 

A:Sharing internet using ADSL. Which router/adsl modem to buy?

I suppose this is what your ISP is trying to sell you..

It will probably work, but I would recommend a product from a brand manufacturer who will actually release patches and support you after two years.

Look for similar products from Linksys, 3Com, SMC, D-Link, Netgear
 

Read other 5 answers
RELEVANCY SCORE 64.8

I am staying at my brother's house right now. They have Embarq DSL and have a EQ-660R ADSL Router (that's what they call it. I wouldn't call it a router). On a typical day, you can expect it to loose internet connectivity multiple times per hour. It will usually find a signal and reconnect within a couple of minutes. I have never had DSL, only cable. Is this something that is typical with DSL, or is it probably something wrong with the modem/router. I have noticed this modem on ebay for only a couple of bucks. Would it be worth picking one up, or is this something he is going to have to deal with as long as he has DSL? Thanks for the help.
 

A:Solved: ADSL Modem Help

Read other 6 answers
RELEVANCY SCORE 64.8

hi,
i have ZTE ADSL modem. how can i find from the modem how much bandwidth i have consumed?
 

A:Solved: ZTE ADSL Modem

The modem doesn't track such data, you need to get that from the ISP.
 

Read other 1 answers
RELEVANCY SCORE 64

This is a friend's computer, Dell Dimension desktop 3.0 GHz, Win XP (Home). He can not connect to the internet. He has a Linksys ADSL 2 modem, and when connected through ethernet cable, the DSL light is on, but packets sent or received are in the hundreds, and he can not connect to any site. He is with France Telecom, and they checked the line, which is fine.

I had a spare modem (Zyxel P-660 ME) provided by Sunrise (in Switzerland), which I tried to connect to his computer. No success. When I type 192.168.1.1, it asks for three things, username, user password, and system password. The first two we know, but the third? Tried 1234 (the default password for the modem). Did not work. France telecom helpline also did not know what system password was required.

Any help will be greatly appreciated. I can post ipconfig /all, and any other information needed through my computer.
 

A:Solved: ADSL modem not working

Read other 8 answers
RELEVANCY SCORE 64

I am running a laptop with Windows XP PRofessional SP2 and an internal Intel Pro Wireless network card. The network is provided by a Belkin ADSL router/modem running 802.11g and serving a network of up to three machines at a time.

I have recently been forced to re-install the machine from scratch and, ever since, I am getting strange problems with the modem. When I first switch on, everything is fine and I can use the Internet normally for as long as I want. However, if I run an application that doesn't directly require an Internet connection (Word, Excel, Visual studio, any game etc) and subsequently try to access the Internet, the modem connection has gone and only a power cycle of the unit will get it back. The Router continues to work normally (share files, see other machines on the network, access the router etc).

Anyone got any idea what might be happening here? Before the re-installation the system was rock solid and I used to get modem problems only once every few months!
 

Read other answers
RELEVANCY SCORE 63.2

Does anyone know much about these? (ZyXel 645m Modems) I have one and have trouble configuring it with a Netgear WGR614 v6 router. I have heard that the modem needs to be put in "bridge mode." I am not sure what that is or how to do that. As far as I have been able to find, there isn't any way to access any settings for the modem. Does anyone know anything?
 

A:Solved: ZyXel 645m UHP-ADSL Modem

Read other 6 answers
RELEVANCY SCORE 63.2

Hi,

I'm trying to use a router/modem to be only a router...
I'm using Siemens SL2-141 which has an ADSL input but im connected to a cable input modem which is - Thompson TCM425.
I want to use the Siemenss wireless option but i cant seem to make it work!

what i've done so far:
My Thompson TCM425 is connected to the internet via MPLS (direct connection, no need for a VPN dialer), I connected it into the LAN2 in the Siemens router (Ethernet connector). I connected the Siemens router LAN1 to the computer (Intel Network card - Ethernet connector).

Thats for the wires.

on the computer -
LAN is the intel network card which is connected to the LAN2 in the router.
Wireless Network connection - I've installed a USB wireless device on the computer to try and connect to the wireless router. I set the IP's manually as shown in the IPCONFIG.(maybe my manualy config is wrong?)

on the router -
I've changed the advanced configuration and disabled the ADSL option
Also, I turned off the DHCP.
This is sposed to make the device a router alone.
The strange thing is that when i use the LAN (Intel card on the computer) I have access to the net but when i try to connect via wireless i get 'Limited or no connectivity', I've done a check and seems like the wireless connection wont get an IP and so I can't access the net via wireless.

IPCONFIG /ALL :

Code:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Docume... Read more

A:Solved: Help - ADSL router with Cable modem

Read other 16 answers
RELEVANCY SCORE 63.2

Hi Guys,

I wonder if anyone can give me some advice please.

I have just had ADSL broadband enabled at our new home but the modem supplied by the provider is a USB modem. Heres the rub, I do not wish to have to trail cable throughout the house to use the internet, The only phone point is in one room, the main desktop is in another, and the laptop wherever.

Is it possible, if I purchase a wireless modem, to set it up in one room unconnected to a computer and access the internet wirelessly from the desktop pc and the laptop from whichever room they are in?
I presume initially that I would have to use the laptop to set-up, but would I then be able to remove the laptop and still have the connection?

I already have a Belkin wireless router from our previous home but there is no USB port on it and I cannot locate any means to convert from USB to RJ45, presumably because of the power requirements of USB.

Anyone any clues on this?

Any help/advice greatly appreciated

Thanks
Keith
 

A:Solved: ADSL Wireless modem advice please

Read other 16 answers
RELEVANCY SCORE 62.8

I have two D-link 2640U ADSL modem with two ADSL lines and they are conneccted to a dual WAN router?

what is best setting for the WAN of dual WAN router: PPPoE client , DHCP client or static IP? (all these are options)

if PPPoE client is better, how to bridge D-link 2640U ADSL modem so PPPoE information is entered in the dual WAN router instead of the modem?
 

A:Solved: bridge D-link 2640U ADSL modem or not

Read other 7 answers
RELEVANCY SCORE 62.8

I've got the following network
2 PCs (192.168.1.2 and 192.168.1.3) connected via a switch to ADSL modem/router (Huawei SmartAX MT-880).
The modem is set up specially for LAN according to ISP instructions.

Here they are
ATM settings
VPI/VCI - 0/33
Address type - DHCP

ADSL mode
G.dmt

All works fine except for periodically lost connection only from 192.168.1.2 (web browser doesn't load the page).
Computers see each other and there are no problems when copying smth in any direction.
Besides, there is a specific behaviuor for both PCs. When using QIP (russian ICQ client) connection
seems to be obtained, but the contact list remains empty and finally the application says it can't connect.

Any suggestions?

ps Actual MTU: 9164
 

A:Solved: Loosing of connectivity in LAN via ADSL modem/router

Read other 13 answers
RELEVANCY SCORE 62.8

Hello all,
I recently purchased a Belkin N Wireless Modem Router with a single ADSL input and 4xRJ45 outputs. I have an old Belkin 54g Router at the moment and wanted to upgrade. Unfortunately when the item arrived I discovered that I had made a mistake as the router was for ADSL and not the Virgin cable modem. Before returning the item I would like to know if it is possible to convvert the RJ45 lead output from the cable mobem to the ADSL input of the router. I've had a look on forums and a lot of the answers seem to be way more complex but without answering this question.
Thanks in advance for any replies.
 

A:Solved: Cable modem to ADSL Wireless Router

Nope, you can't use that router with a cable modem.
 

Read other 2 answers
RELEVANCY SCORE 62.8

Hi all
I would appreciate any help to sort this one out.
I am going to buy a Netgear DG834 ADSL Router,Modem,firewalled and 10/100 mbps switch.
Wired not wireless Ethernet.
Due to my two GPU's and soundcard I have no room on my ASUS a8n32 mobo to fit anymore pci cards. But I have Two RJ-45 lan ports supported by Marvel Gigabit lan controller.
Will I be able to fit the Modem/router to the RJ-45 lan ports.
Best regards
Rex
 

A:Solved: Connect ADSL Ethernet modem to aRJ-45 port

Sure, that's what they're there for. No reason not to use them.
 

Read other 2 answers
RELEVANCY SCORE 62

Hello Guys,

First of all, I am totally noob on managing computer networks.

I ve bought this new Cisco/Linksys SRW2024 Switch, and i already have the Cisco/Linksys Router WRVS4400N and also one ADSL Modem.

The switch is managed 24 port gigabit.

How shall i connect them together?

The switch doesnt seems to have DHCP Server for its clients to optain automatic IP and DNS.

Please help.

The aim of this config is to have a gigabit connection between the network and share the ADSL modem Internet.

At the beginning i wanted to get rid of the router and just keep it as a WiFi unit, but i think i will not be able to connect the ADSL modem directly on the new Switch. Please advice.

Jio
 

A:Solved: SRW2024 Switch + WRVS4400N Router + ADSL Modem

Read other 10 answers
RELEVANCY SCORE 61.2

hello. i have ORIGO DSR-TI04 ADSL2+ (4 Port) adsl modem. 3 pc connected internet with this modem. but there is a problem to connect internet. 3 pc have ethernet cards and connect modem via this cards. connections are getting lost in 3 minutes avarage. i mean we have intermittent connection. i found a way to get back connection rapidly: when the connection lost, i switch off the modem and then connections get back. Tech Support Guy Forums help me again. thanks.
 

A:Solved: ORIGO DSR-TI04 ADSL2+ (4 Port) adsl modem problem.

Read other 8 answers
RELEVANCY SCORE 61.2

Hello,
First post here. I have a rather peculiar issue.
When I plug my computer to my ADSL modem, I can access the internet with no problems; however, when I plug in my wireless router to the modem, some websites do not load (my bank's website, some government sites, my work's citrix interface, etc). As soon as I unplug my router and plug directly to the modem, the websites are accessible again.
Now, I have three desktops, two of these connected via wireless, one hard wired. All of them present the same problem when the router is plugged. My laptop has no problems connecting to any website, even when connected to the router via wireless or hard wired.
Is there a problem with my desktops' settings? Like I said, the laptop works fine.
My modem:
TP-Link TD8840T
My router:
AIRLINK101 AR670W

I run out of ideas, please help.
 

A:Solved: Can't access certain websites when wireless router is attached to ADSL modem

Read other 7 answers
RELEVANCY SCORE 61.2

hi guys,

i previously made a thread about buying a wirless router (http://forums.techguy.org/networking/916610-connecting-usb-only-adsl-modem.html). From that thread i have decided that im going to buy a router with intergrated adsl modem. i made this thread because i dont want to go through the hassle of returning a item bought of the internet. I had my eye on this router: http://www.amazon.co.uk/Belkin-Wire...ef=sr_1_3?ie=UTF8&qid=1271498847&sr=1-3-spell. Firstly i wanted someone to check that this is a wirless router with intergrated adsl modem.

I also wanted to know how i will have to set this router up. do throw away my adsl modem that i have now? or i will i need to keep that connected? Would i need to insert my modem into that router or will i just need that all in one wireless router connected to my pc and thats it?

Im very confused about my broadband. i dont know whether it is dial-up or adsl. i know for a fact that i am using the speedtouch 330 adsl usb PPP modem, but under Network connection orange broadband is listed under Dial-up (i will try and post pictures to help explain what i mean). and also i have to use software to connect to the internet, and its programmed to connect to the internet by using the speedtouch 330 adsl usb PPP modem. When the router arrives will i be able to change this so that it connect using the new router?

Any help would be appreciated. i will try and upload images to help explain what im talking about.

Thankyou
 

A:Solved: Question about setting up a wirless router with intergrated adsl modem.

Read other 12 answers
RELEVANCY SCORE 60.8

i know how to put my modem in bridge mode from the setup page but after i put it in bridge mode i can't use internet ....and i have to reset it to defult factory settings... to use internet again/......

some one help...............
 

A:Solved: how do i bridge my siemens speedstream 4100 adsl modem with netgear wgr614v9

Read other 16 answers
RELEVANCY SCORE 60

Hello Guys,

I wanna Know That I hab a nokia siemens SL2_141 modem which is not in use...beacause I dont have anymore BSNL connection. Now I am using A Wireless Modem of MTS. Recently I have Buyed New Phone I wanna Use wifi...
So ,Wanna Know From You Guys...

HOw Can I connect Internet of my Wireless Modem to The Wifi of nokia siemens SL2_141 Modem.I have Attached A photo So that U ppl Understand properly..

Pls, Help me out with this Problem
OS-Window 7 (32bit)

Uploaded with ImageShack.us
 

A:Connect a Wireless Modem to ADSL modem for Wifi

The "nokia siemens SL2_141" is a modem/wireless router combo; I assume that "A Wireless Modem of MTS" is also a modem/wireless router combo.

If my assumption is correct you can use the Nokia as an ethernet switch and wireless access point ...

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If ther... Read more

Read other 3 answers
RELEVANCY SCORE 58.8

Hi, I have an old dial up account with some important email addresses which I don't want to lose. Currently I have them configured to download into Outlook via my broadband service provider on an Orange Livebox, connected by usb. So far so good. The only problem is the dial up service provider periodically asks me to connect by logging on to their dial up connection to keep the accounts active. Until now, I've done this using a very old pc. However, my wife would like me to get rid of my antique P75, so I would really appreciate if someone could show me how to set up my Athlon 3000 machine with built in modem to use both connections, though not necessarily at the same time. Thanks
 

A:How can I use a usb connected adsl modem and a dial up modem on the same pc?

Read other 10 answers
RELEVANCY SCORE 56.8

Hi~not been on here for a while (took me an age to remember log in etc!) which is a good sign as everything has been ticking along quite merrily...then I thought I would catch up with 21st century and the fun began
Ok~I have just purchased a 'Belkin ADSL modem with wireless G router and wireless G usb network adapter', was so proud of myself until I wanted to intall it etc.
It would seem that I have the wrong modem~I presently have an ADSL speedtouch which has a fixed connection into it so am unable to use etheral wire. (I've confused myself already!)
I have an old 105 Voyager that I was given when I was with BT but it won't let me install it, even using disk I still have (tried it on notebook laptop too~keeps telling me I don't have administrator rights blah blah blah).
I am currently getting my broadband from Orange~If I upgrade with them they want to charge me a small fortune initially and then monthly which I have told them to poke!

*Is there anyway of using present speedtouch with belkin wireless?
*If not, if I purchase an ADSL modem (without a fixed connection!) what do I need to do then!? Uninstall speedtouch-install new modem? But will my Orange broadband still work if internet connection not 'coming through' Orange provided speedtouch?
*If need to buy different modem, where is the cheapest/best/easiest place for me to go either on foot or online?

Sorry it's long winded but it's late and it's been driving a little c... Read more

A:ADSL Modem/Wireless Modem

Hi Lara.

I am not familiar with DSL service in the UK but someone else here may be able to assist you if you gave us the exact model numbers of all you networking hardware.
 

Read other 1 answers
RELEVANCY SCORE 55.2

Hello guys,

I have 23 room 1st and 2nd floor with telephone wire activate with ADSL connection...

Now, My plan is i will configure ADSL connect using WAG54G2 and connected to adsl line in each room?

My question is, is there any problem for "Interfering the signal" since the room is 4m x 5m and the distance is only 6" concrete block? 10 rooms (1st rooms) 13 rooms (2nd floor)

Please help and advice (specially Mr. TerryNet)
 

A:Solved: ADSL 23 devices and 23 rooms with ADSL phone connection

Read other 15 answers
RELEVANCY SCORE 54.8

Charter up my internet price and told me they would put me on a promo plan if I came in and got one of their modems. I picked up the modem (Cisco DCP3008) yesterday and hooked it up tonight. I had everything connected through my DIR 615 and Charter came up asking me if I was upgrading, etc... needing to verify and so on. I went through that and the last step it said it need to restart the modem to finalize. The modem restarted and came online, however the browser never indicated the processed had finalize. I call Charter, we wired the modem directly to my laptop and got a connection. I thought things were good. I hooked back into the router restarted the modem, all lights came on, started the router and no IP address. I went into setup and clicked clone MAC address and hit save, still no IP address after going to status, dhcp release and dhcp renew.

I reset the router back to factory settings and it still would not pull and IP address. The router worked great before the new modem. Any suggestions to get my router to pull an IP address?

Thank you.
 

A:Solved: DIR 615 will not pull IP Address with new cable modem

Read other 16 answers
RELEVANCY SCORE 54.8

Hi everyone,

Just i wonder know which best for ADSL usb modem.

i have Zoom (ADSL usb modem) is best. i used online with Plus.net.

its big speed is 576kps (normal or less 512kps) and cost 18.99 every months.

i have no problems with them for over 8 years.

What do you think? or other better than mine?

im grateful if anyone know which best.

ps- its only ADSL (not dial up 56k, 1MB or more)

cheers
Dunko9
 

Read other answers
RELEVANCY SCORE 54.8

can i connect to the internet on a dial up 56k plan using a adsl modem. if so, will it be faster?
 

A:adsl modem

There is no way you can do that. You need a normal dialup modem to do so,
 

Read other 1 answers
RELEVANCY SCORE 54.8

Hi

I've got a Mecer ADSL 4 Port Router. I've got a laptop and I've got a normal computer. They both have Windows XP. I connect my laptop to the router via USB and connect the computer via the ethernet port (or whatever its is called). The internet works well on the computer, but stops working after an hour or so on the Laptop. Can anybody help?
 

A:ADSL Modem

Read other 7 answers
RELEVANCY SCORE 54.8

my ADSL connection fails because of uncompatible hardware driver for Dlink DSL-200 ADSL modem.
what should i do?
the windows vista driver didn't work either.

A:ADSL modem DSL-200

same problem here looking for help

Read other 2 answers
RELEVANCY SCORE 54.8

firstly sorry cuz my english isn't well, When i do many thing at the same time on the internet like download,surfin on web, listenin music.. Suddenly both lights of USB adsl modem go out and all my usb devices stop working. A full reboot is required to get USB working again (which is really boring).

VIA VT8C572/VT82C586 PCI to USB Universal Host Controller ( 1.0 interface)
AMD Athlon 800 Mhz
128mb SDRAM
 

A:USB Adsl modem

I'd guess that you have some sort of USB driver conflict. It's not uncommon to have issues if you get a bunch of USB devices all connected. Networking seems especially prone to have issues with other USB devices...
 

Read other 1 answers
RELEVANCY SCORE 54.8

need a help~ i using wifi to connect my adsl router~ yesterday i wrong press the update firmware inside the modem setting, now i can't log in to modem at all~ why?

all my request at here..

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\d3viL>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : d3viL-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TP-LINK 300Mbps Wireless N Adapter
Physical Address. . . . . . . . . : F8-D1-11-14-44-B6
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::6d9b:76e:31df:7784%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, May 22, 2012 12:27:03 AM
Lease Expires . . . . . . . . . . : Wednesday, May 23, 2012 12:27:08 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 318296337
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-42-3F-14-00-50-8D-97-CB-A3

DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet ada... Read more

A:cant log in to adsl modem

Read other 8 answers
RELEVANCY SCORE 54.8

Hi ........need a USB ADSL Modem ? Support UK or BT !

Which make is recommended ?

Been checking here not sure which to go for ?

http://www.dsl-warehouse.co.uk/products.asp?pm=258

&

http://www.dslsource.co.uk/products.asp?idProdType=1

Any other sites recommended ?

Thx !
 

A:Need a USB ADSL Modem ?

Read other 14 answers
RELEVANCY SCORE 54.8

I want to go from a desktop pc to wireless laptop .I have been told that 330 modem adsl wont work with vista .I got a wireless router and modem but cant get it to work can anyone help me sort this out.

A:help with modem adsl 330

Okay first I very much doubt that the modem cares whether you are using Vista or not, so that's something to disregard.

Is the hardware a "Speedtouch 330 Modem" from the UK ? Googling indicates this hardware is being provided by an ISP ?

If so, your best source of information is the ISP. Check to see if they have configuration instructions on-line, or call Tech Support for assistance.

Read other 3 answers
RELEVANCY SCORE 54.8

Hi Guys,

Long time Without a Prob.....Till Now

Like the title says, i dont know if its a Hub or Adsl Modem Prob.....

When i Transfer Large amount of files (withIn 3gb) on the network my whole network goes down even the 2nd comp, at the same time i have to reset the hub (turning It off) and the ADSL modem just to get connection back from the 2 comp and internet.....

I Have a Netcomm ADSL2+ and a Generic 5 port Hub.

Now i dont know if its the modem or the hub....can some one show me the light on this problem.......

I Can just buy one or the other but if my ADSL modem is running ok i will buy a New Hub (Maybe the 1gb 5 port) if not then i will need info on a GOOD ADSL+ Modem....
 

A:Hub Or ADSL Modem?

Read other 9 answers
RELEVANCY SCORE 54.8

Hi,
I'm planning on getting ADSL soon and I'm trying to work out what sort of ADSL modem would be ok. I want to use two computers with the modem but the phone jack is about 6 metres away from the computer.

Would a wireless ADSL router allow me to have two computers access the internet at the same time? Do I need anything special to have my computer work with a wireless unit like the one here http://www.billion.com.au/html/xdsl/7500g.htm? Would using something like this mean I don't have to have a cable running from the phone jack to my computer (like I do now lol)?

My computer has XP Home and the network card (if I looked up the right thing) is a Realtek TRL8139/810x Family Fast Ethernet NIC.

Any comments you can give would really help.

Thanks
 

A:ADSL modem

You would need wireless network cards in both pc as well to use the wireless unit.
 

Read other 2 answers
RELEVANCY SCORE 54.8

hello
i have a d-link dsl-504T adsl router, i had to do a reset on it by using the factory reset button but now it wont turn on properly, the status light doesnt come on and i cant connect to it in any way shape or form, is it screwed???? please help,
thanks in advance
ninechat
 

A:Adsl Modem Help!!!!

Read other 6 answers
RELEVANCY SCORE 54.4

Hello there.
I have an ADSL 384/128 web connection and I use a modem/router.
Is it true that this modem has good enough firewall in it?
Should I deactivate the xp's firewall? They told me that I shouldnt have 2 firewalls work at the same time.
What about the Zone Alarm? Do u recommend me use it?
Things look so complicated, some1 plz help about this serius security matters???
Thanks
 

A:adsl's modem firewall

Read other 6 answers
RELEVANCY SCORE 54.4

hi friends.iam a new member of this site.i recently bought a adsl modem.
it is hurricane 8600 usb modem.i have installed my modem and the drivers.
my modem works.the problem is when i start my computer it doesnt detect my modem and it says adsl no hardware found.
but after the computer is on and when i take it off and put it back in the usb port,it gets detected.
so can u help me with this problem.plssssssss
 

A:regarding adsl modem plssss help me

Uninstall the modem
Install the driver FIRST
Then attach your usb dsl box.
 

Read other 1 answers
RELEVANCY SCORE 54.4

Hi all,

I use the ADSL technology for having the Internet. For that, I have a wireless N ADSL2+ modem router model TD-W8151N that I connect it wirelessly by my laptop and smartphone and etc.

I've heard that there is some Windows or smartphone app that can crack my modem and uses my traffic! My traffic volume finishes very soon.
My modem configuration is as normal and is fine but I don't know what is that method those crackers use to break the security of it and my traffic is being stolen still!

Is there any way to block the way crackers crack my modem? If yes, how please?

A:My ADSL modem is hacked!

Quote:
the easiest ways to deter hackers is to disable your remote management settings


How to Stop a DSL Modem From Being Hacked | Everyday Life - Global Post

Read other 3 answers
RELEVANCY SCORE 54.4

Hi everyone
i hope this problem is in the right forum. Apologies to everybody this makes no sense to and for my ignorance regarding this. At the moment i connect to the internet via freeserve/wanadoo with the ADSL broadband modem (a Thompson speedtouch) that they provided. This has now failed. What i would like to know is if i went and installed a different ADSL modem bought from any PC shop would i still be able to access the internet via freeserve/wanadoo. The reason i ask this is that when i spoke to their customer services they said i had to use a modem supplied by them. I thought all they had done was supply an ADSL modem free to encourage me to use them as an ISP. They now seem to be claiming that i have to have to use the modem they supply which no doubt they can resupply at a handsome fee. Does anybody out there know any different. Can i use any modem to access the net using freeserve/wanadoo's software or do i have to use theirs. Thanks in advance for any answers
 

A:ADSL modem query

there is a hi propability this would work, IF ...
you had all the config info AND
you did not require help/support from the ISP.

there are companies that repackage OEM hardware with new docs and
cases with their logos, but the real guts are brand name hardware.
 

Read other 26 answers
RELEVANCY SCORE 54.4

Hey,

My current ISP is 8 Mbps down and around 700 Kbps up.

I have a BT USB ADSL Modem with max down speed of 8Mbps, I'm quite happy with it as I seem to achieve a fairly constant speed of 7.3Mbps according to speed tests and file download times..

The thing is it uses 73% of my USB bus, If I plug in anything else but my printer to USB ports, the other USB devices wont work unless I reboot, then when i do my modem will only connect at about 5Mbps.

I've been looking for a new modem, I'm not sure what's the best to go for so many options, tho I know I wont be getting USB.

I also have to bear in mind that there are strong rumours that my ISP will be upping it's max down speed to 25 Mbps soon, and when there were rumours that they were going to go 8Mbps it happened within weeks, I want a modem with good max downspeed, Every modem I can seem to find has max downspeeds of 8Mbps.

any advice on what modems to go for, preferably on the cheap side of extremely good value

also has to be available to the UK.
 

A:Looking for a fast ADSL modem.

Read other 8 answers
RELEVANCY SCORE 54.4

A friend of mine has a broadband account with AOL. The computer works fine if the modem AOL supplied is used, however they wanted to go wireless so that the second computer they have could access AOL if the other one was offline.
The computers can 'talk' to each other via the wireless but the modem bit of the adsl wireless modem/router does not seem able to connect with AOL for either computer. This appears to be a problem with the set up of the modem which is a fairly standard Newlink. The set up menu has a specific AOL button which configures the modem to AOL's settings but nothing happens afterwards.
They are tearing their hair out and I am starting to do the same! Knowing my luck it will be something so obvious I haven't thought of it.
All help gratefully received.
Steve
 

A:AOL and wireless adsl modem

Tell your friend to sign up for a real ISP, and you won't have these kinds of issues.
 

Read other 1 answers
RELEVANCY SCORE 54.4

hello this is uday and New is this site.i am facing problem with 3 public ip in one adsl modem it is possable or if possable tell me how
 

A:3 public IP in one ADSL modem

That's call a Virtual Ethernet Interface but requires three sources to feed the virtual addresses, eg:
Code:

--- 192.168.1.x network ------+
--- 172.16.10.x network ---+ |
--- 10.101.23.x network -+ | |
| | |
common switch ---- [B]systemX[/B] with Virtual Interfaces

Then systemX can have one NIC which has a real ip address on (say) the 192.168.1 net,
and virtual addresses for the 172.16.10 and 10.101.23 net

The source networks could just as easily be public ISP connections thru separate modems
(which would require 3x DSL lines and modems for example).

here's a reference for How-To on Linux

and a reference for Win/XP
 

Read other 1 answers
RELEVANCY SCORE 54.4

Good Morning, i hava an internal ADSL PCI Modem, ITEX Chipset and Topcom Company.

Under XP working god, now i need driver for Windows 7 64Bit.

Can help me ? Please ?

Thanks in advance
Riccardo

A:ADSL PCI Modem Drivers

Welcome to Seven Forums: Not a very user friendly support page. I can for see a couple of problems one being a modem using 32 bit drivers, the other locating this particular manufacturers driver downloads. So lets try this, does it show up in your device manager? If so right click on it>then properties>details tab>drop down menu>select hardware id>Copy and Paste the hardware id string. We might get lucky and find another manufacture using the same chip that might have drivers for it. Oh also please take the time ot go to user CP (top of page) scroll down to edit system specs and fill them in. Thanks Fabe

Read other 2 answers
RELEVANCY SCORE 54.4

The problem is every time I go on the internet I have to re-install my modem driver in winxp. Can enyone help?
 

A:adsl modem driver

tanglefoot

where are you
who is your isp
what o/s are you using
and is it usb or rj45
 

Read other 1 answers
RELEVANCY SCORE 54.4

when I unplug AC Adapter from my notebook my adsl modem restarts... it never happened before... pls help :S
 

A:ADSL modem restart

Replug the laptop charge into a power strip with an on/off switch and
then power it off before unplugging.

When the laptop is charging, especially if the battery is very low, the removal
of the A/C adaptor from the laptop creates a SPARK and this creates RFI;
Radio Frequence Interference. A wireless ADSL modem may take the RFI
and --- do any number of interpretations.
 

Read other 2 answers