Over 1 million tech questions and answers.

BSOD BSOD BSOD (crawls in corner and dies)

Q: BSOD BSOD BSOD (crawls in corner and dies)

hey i am on a emachine with about 1400gb of ram andbut an old video card, i think realtek 200. But there is a game called Combat Arms (mmfps) game and when i try to load a game it either gives me a blue screen or restarts my computer. This has happened before after a few updates and then im fine then im not. i dont think it the new ram i instaled( 2 ddr 3200 512gb) Its only made the game faster. Whats the problem.

RELEVANCY SCORE 200
Preferred Solution: BSOD BSOD BSOD (crawls in corner and dies)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD BSOD BSOD (crawls in corner and dies)

Read other 14 answers
RELEVANCY SCORE 76.4

just like the Title says, when ever my internet dies i get a BSOD

the reason for my internet dying is because of the damn adapter is glitching in the output

dont see how the adapter glitching can cause a bsod

cant give anymore details because thats all i have

please help
 

A:BSOD when internet dies

adapter glitchingClick to expand...

Do you mean your LAN card?

If yes, then a faulty piece of hardware would be a primary cause for BSOD.

I would update the driver for the LAN card (go to another computer that has an active internet connection, download the driver to a thumb drive or CD, and install on the computer in question).

If the LAN jack is on your MOBO, you may have a larger issue. If it is a expansion card, try replacing it.

Hope that helps.

Red
 

Read other 2 answers
RELEVANCY SCORE 75.2

Hello, so my birthday is coming up and my mom wants to get me this computer but I think whenever it runs out of power i think it causes a BSOD.

EDIT: Forgot to mention that the very first time i started up this laptop I got a BSOD with rdyboost.exe causing the problem. Did repair windows and the problem went away till this laptop died and ocne i booted it up again i got a different error.

A:BSOD after labtop power dies

Hi,

Your logs show Norton Internet Security is causing issues:


Code:
start end module name
fffff880`04350000 fffff880`043b6000 SYMNETS
fffff880`043b6000 fffff880`043ec000 SYMEVENT64x86
Please uninstall:
https://support.norton.com/sp/en/uk/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

As an alternative, please download and install:

Microsoft Security Essentials.
Recommended from a strict BSOD perspective, compatibility & stability
compared to other antiviruses/internet security software.



   Note
Once downloaded, update and run a full system scan


Then see how the system performs?

Cheers

Dave

Read other 1 answers
RELEVANCY SCORE 74.4

Hey Guys,
I am having an issue here and I will greatly appreciate if anybody here can help me resolve this issue.
My Computer has 2 SSD and one HDD and i was using it just fine for a few months but I always thought that the computer was very slow to be using 2 SSD on Raid 0 so I tried to find out what was the issue.
When researching about the matter I found out that the RAID 0 was using one SSD and the HDD not the 2 SSD that as a result the drives where acting as HDD not as SSD so I went ahead and created a Complete System Image then I Deleted RAID 0 and created a new one now with the correct 2 SSD drives in it.
I booted up and restored the PC from the Image I had and all went well.
Started using my system again and I was loving the speed but after 3 days I started getting this BSOD Critical Process Died and now it happens every 10 minutes after I boot up the PC. Makes my PC useless.
I have searched high and low looking for a solution but nothing seems tio fix it.
I tried deleting the raid again and creating a fresh raid but still same issue.
I tried updating all drives but all are up to date
I tried running sfc/scannow but it fails
I tried doing system restore to an early restore point but that always fail
I tried refreshing the PC but that fails as well.
I have the system set to create minidumps when it crashes but I never get a minidump file created
I am out of ideas and any help you guys can provide will be greatly appreciated.
Attached is the ... Read more

A:BSOD Critical Process Dies Issue

No dumps so not much to work with.

Have you tried getting rid of the RAID0 setup completely. That seems to me the most likely cause. I doubt you will see much difference in speed since you are booting from a SSD.

Read other 0 answers
RELEVANCY SCORE 73.6

Okay, I've tried everything. I've tried chkdsk. I've tried reinstalling. I've done everything I could think to do. I think my hard drive may be bad. But, I'm not sure. I was getting BSODs that said Stop 000000x08 and the affected program was iaStor.sys Although I was unable to delete it. I can't even start in safe mode. Whenever I try to start at all it takes me to a BSOD and immediately shuts off. I can't even read what it says. I've been driving myself crazy over this. Plus, I've reinstalled 2 os because that's what I've read to do. I just don't know what to do. I think it may be my hard drive but have no idea how to check. Thanks for any help. My system is a Dell Inspiron 1525 with Windows Vista Basic Home.

A:Flashing underscore in Right hand corner + BSOD

In order to test the hard drive you can run one of the diagnostic programs below. The files, in ISO format, will need to be burned to a CD using a program that can burn CD image files.

Hitachi Drive Fitness Test
Downloads
Western Digital
WD Support / Downloads / Select Product
(choose your product and select Data Lifeguard Diagnostic)
Seagate
| Seagate

Could also be a drive controller/motherboard issue but run the diagnostics first.

Read other 4 answers
RELEVANCY SCORE 72.8

Im either getting the BSOD throughout the day while my computer is left on or when i return it is frozen and has red pixels in top left corner covering 4 shortcuts in total.

I have also supplied DM Log Collector in files attached.
All help appreciated and thanks in advance.

Below is the windows unexpected shutdown report.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88005566C9B
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\051416-62868-01.dmp
C:\Users\Scuba Steve\AppData\Local\Temp\WER-155735-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Read other answers
RELEVANCY SCORE 68.4

PSU: Corsair 750W CMPSU-750TXEU
Case: THERMALTAKE ElementS
CPU: AMD Phenom II X4 965 BE
HDD: SAMSUNG HD502HJ SpinPoint F3 3,5" 500GB
GPU: ZOTAC Geforce GTX480 1536MB DDR5
Lettore: LG Super Multi CH10LS20
RAM: CORSAIR Dominator 2x2 GB DDR3 (CMP4GX3M2A1600C8)
Mobo: Asus M4A88T-M/USB3
OS: Windows 7 Ultimate 64bit

I've got this system running since november 2010 and i have had not a single problem. About a month ago, i had issues trying to boot windows: i had to turn power on/off loads of time until i was able to get to desktop. Since that day, Blue Screens happened every time i got to desktop, after few seconds or after few minutes... Freezes and BSoD kept coming, so i ran some tests: memtest86, scandisk, a samsung hdd test... They showed no errors but memtest.
Memtest86 found out loads of errors coming from both RAMs and so i bought new ones: Kingstone HyperX KHX1600C8D3K2. I had same problems: freeze and errors just after boot, not later (played some heavy game for more than 5 hours or so).

I tested old rams on another computer, and they worked just fine.

Oh, and i format/install Windows7 about three times.

I tried to remove GPU and tried to use MOBO GPU, but it still freezed.

Right now i have no freeze/BSoD on boot, but only while playing (after few secs).

P.S. : I had 2 BSoD using the BsoD collecting application.

P.P.S. : Some things are written in italian because i'm running an italian OS.

A:Random BSoD, BSoD while playing, BSoD on boot

Here some Blue Screen coming from Driver Verifier ...
If my Blue Screen View says the truth, they come from MagicIso... Which i have installed, like, today...

Read other 3 answers
RELEVANCY SCORE 68.4

The title says it all. Brand new i7 x980. Asus x58 premium. 12GB Mushkin enhanced redline. USB 3.0. SATA 6Gbps. Intel x-25MG2 160GB.
Multiple blue screens. Just this morning (Tuesday morning) it was 4 or 5 of them within about a 40 minute time frame. PC Pitstop driver scan had me update my NIC drivers. No help.
I'm hoping you forensic computer detectives can help figure this one out.
Minidumps are zipped up as are three WER XML files.
Thanks,
Ethan

A:BSOD, BSOD, BSOD (minidump files zipped)

What was the error message that arrived with the BlueScreen? Was it Driver_irql_not_less_or_equal?

Read other 6 answers
RELEVANCY SCORE 62

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8010C69010
BCP2: FFFFF880069CD6AC
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\040913-9204-01.dmp
C:\Users\Phantom\AppData\Local\Temp\WER-21060-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

==========================================================

changed bios settings from RAID to IDE didnt seem to help this has occurred multiple times during playing planet side 2 the game runs fine then suddenly crashes im pretty sure i have the latest drivers and everything is up to date can someone clever help me please

A:BSOD Plannetside 2 (steam) black screen> reboot> BSOD crash report

A stop 0x116 is a display/graphics related issue. Many a factors or components may cause such a BSOD.

First of all, it is the display driver. From your BSOD dumps, I have noticed that it crashed the same irrespective of the driver version over time. So overlooking this part right now. Will concentrate it on later again, if needed.

Next thing is overclocking, which sometimes lead display to crash. And, you are slightly overclocked.

Code:
CPUID: "Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3411
As the system is crashing, you should stop overclocking. Set all the hardware elements like CPU, GPU and RAM to default; and reset the BIOS to default too.
How To Clear CMOS (Reset BIOS)

Heat is another factor. Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Also, dust accumulation causes heat, and dust accumulation depends on the age of the system. How old the system is? If possible, dismantle it and clean the inside carefully .... specially the air vents and fan grills, so that it can blow the hot air out easily.
Dont forget to apply thermal paste to the CPU when re-seating the system.

Insufficient power supply is also a great cause of display crash. Check if the CPU is supplying adequate power there or not.
eXtreme Power Supply Calculator

It GPU itself may not perform upto the mark. Stress test the Graphics Card u... Read more

Read other 1 answers
RELEVANCY SCORE 62

Just did a malware scan and ended up with bsod. Please check my mini dump and advise on what to try.

Hjalmer

A:Recent crash issues system exception bsod and Page Fault bsod

Tried loading Malware Byte and had BSOD:

On Thu 4/3/2014 2:19:27 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040314-17440-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800030B7D79, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System

Read other 3 answers
RELEVANCY SCORE 62

Hello Guys and Gals, my Windows 7 Laptop is in a serious pickle and I have used every bit of troubleshooting knowledge I have learned in my 10 years working in a Windows environment to no result.

I hope that I am posting in the correct forum, and I have read the forum rules.This is my first post on any help forum ever, so I hope the way I have written this is in conformance with what you all are used to.

I have seen multiple error codes thrown when I forced the computer not to restart and show me the BSOD details. This is what is stated:
Stop 0x000000F4 (0x0000000000000003, 0xFFFFFA800600c910, 0xFFFFFA800600CBF0, 0xFFFFF8000357B7B0

Summary: My laptop boots to the Windows 7 login screen but after logging in, startup never finishes completely and is completely unresponsive to (Ctrl,Shift,Esc) and any other attempts to pull up the task manager. My laptop is dual boot, and has these 2 OS's installed: Windows 7 Home Premium (Genuine) and Kali Linux, both of which are 64 bit versions.
When I attempt to boot the computer into the Windows 7 environment, I am able to login at the normal account login page, but after this, it will take an entire day's time to load the desktop and even when it does, finally show the task bar, then the icons, I am unable to open any of them. For instance, after about 20 minutes, when the taskbar finally appears, when I click on the start button, whether from the keyboard windows icon, or the mouse, I will have to wait about 10 minutes until the start... Read more

A:BSOD, Win 7 desktop wont boot even in safe mode, BSOD error:0xc0000010

  
Quote: Originally Posted by wlocas


Stop 0x000000F4 (0x0000000000000003, 0xFFFFFA800600c910, 0xFFFFFA800600CBF0, 0xFFFFF8000357B7B0


Havent read the rest. Coz those are not relevant.

Let us know about your storage system. Namely ....
HDD or SSD
How many
Make and model (if possible)
Storage controller mode (SATA/IDE/AHCI/SCSI/RAID)
Storage controller driver
Let us know. Those information (as many of them as possible) will help us to start troubleshooting.

Read other 7 answers
RELEVANCY SCORE 62

Hello, so i think i have dealt with this bluescreen 3times now, and it seemed to have gone away after i went from my amd system to intel. But now its there again. The most useful function ever, wake from sleep, is now bluescreening my computer. I instantly tried to use the Disply Driver Uninstaller because thats how i solved this before, but no luck... So please, could anyone help me out? I have the dmp file too. (apparantly this support forum does not allow for dmp file uploads.... well..

https://mega.nz/#!4Z4hWIqT!XuoyoNUKM...RvY0RvlTppYago
Hope that works... (now i realise i could have used google drive and escaped the hassle of creating a mega account...)

Read other answers
RELEVANCY SCORE 62

Hello. I am experiencing some random BSODs. It happens no matter what program is running. It could be in a game, surfing the internet, or listening to music. It is very random. Happens about once every two days on average. Some days are worse.

I have tried running driver verifier, but it would still only bsod occasionally, except it would bsod on startup instead of being in the desktop and getting a bsod.

I have also ran memtest x86 a few times and found no errors.

My windows 7 is:
-x64 bit Professional Edition
-Original OS installed on my system (I built the system)
-Full retail.
-Built my system over the summer. Been getting occassional BSODs ever since.
-OS installation is about 4 months old.

And if this helps, My system parts are:
-Intel i7 860
-EVGA P55 LE motherboard (using onboard audio as well)
-EVGA gtx 470
-Adata G-Series DDR3 1600mhz ram (2x2gb)
-some low-end hitachi 750gb hard drive
-Thermaltake Toughpower XT 775 watt.

Yes I have installed all the latest drivers from all the manufaturers' websites.

I have also attached a BSOD dump and system health report.

Please and thank you for your help.

A:Random BSOD... Help please (BSOD dump & system health report attached)

Welcome to SF.

Like you indicated, you have the latest video driver.

However, your network and wireless network drivers need updating.

Marvell Yukon:
Driver c:\windows\system32\drivers\yk62x64.sys (11.10.6.3, 384.00 KB (393,216 bytes), 6/15/2009 2:10 AM)

D-Link Adapter:
Driver c:\windows\system32\drivers\athrx.sys (8.0.0.238, 1.47 MB (1,542,656 bytes), 10/5/2009 4:34 PM)






Quote:
Followup: memory_corruption
---------

4: kd> !analyze -v;r;kv;lmtn;lmtsmn
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000024, memory referenced
Arg2: 000000000000000d, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000348856f, address which... Read more

Read other 7 answers
RELEVANCY SCORE 62

Around the 17th of March I was playing Smite, joined a match and about half way through it, I received a freeze then a BSOD. This continued to happen randomly when I would play a smite match, ranging from every 1 to 6 matches, could happen near the beginning or in the middle of the game. So I wouldn't ruin more games for others I attempted to fix the problem myself, looking up that I had to update my GPU drivers (which I do now have) or uninstall them to let my pc auto install the suitable one (This ended up with my PC or Radeon hardware detector not detecting the GPU so I had to system restore). I also tried cleaning out my PC rig with a duster to see if, my bad PC hygiene, had caused heating problems but it had no affect. I have used malware-bytes to detect malware and viruses but all that was quarantined seems to have had no affect.

I tried these solutions that I see everywhere when I search, but obviously they didn't work. So instead of finding a solution I attempted to find more symptoms, I found that within the blue screen it mentions atikmpag.sys, I see that my PC problem reports tell me that I have a lot of Windows shutting down and Video hardware errors (With the BCC codes BCC116 and BCC117 respectivly). I also attempted to see if I would gain the BSOD by testing on more strenuous games and didn't gain any BSOD whilst playing Dark Souls 2 and Batman Arkham Knight, thus so far I have concluded that this BSOD seems Smite specific, though this could do with some f... Read more

Read other answers
RELEVANCY SCORE 62

Windows 7 came installed on system
system about 7 years old
AMD Phenom II X4 820 processor 2.80GHz
Nvidia Geforce 9100
motherboard: pegatron m2n7b-la
power supply: liteon 300w
HP Pavilion AY748AA-ABA p6320y
Desktop

Any help is much appreciated and thanks jcgriff2 for BSOD posting instructions

A:BSOD 0x000003b ran BSOD File Collection app + perfmon (attached zip files)

Hi,

All of the attached DMP files are of the SYSTEM_SERVICE_EXCEPTION (3b)bug check.

This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.

This error has been linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code.

BugCheck 3B, {c0000005, fffff8000324b1a4, fffff88009790f30, 0}


Code:

1: kd> ln fffff8000324b1a4
(fffff800`0324b190) nt!MiUnmapLockedPagesInUserSpace+0x14 | (fffff800`0324b4f0) nt!KeUnInitializeUmsThread
The exception occurred in nt!MiUnmapLockedPagesInUserSpace+0x14. This is an API that maps a buffer into the dynamic address range.

--------------------------

1.

-- PROCESS_NAME: nvstreamsvc.ex

Uninstall/disable nVidia Streaming Kernel service ASAP!

2. Uninstall Spyhunter ASAP from Enigma Software as it's likely causing conflicts with Malwarebytes.

3. Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.

4. sptd.sys is listed and loaded in your modules list; SCSI Pass Through Direct Host - Daemon Tools (known BSOD issues with Win 7 and 8). Plea... Read more

Read other 1 answers
RELEVANCY SCORE 62

Hi everyone,

After restarting the computer following a malwarebytes scan, I could not get into window, nor safe mode and system restore by pressing F8 at start up. What I only had after running a little while is BSOD. Btw, I ran diagnostic test a few times. All passed.

After this happened and I did some searching online, I decided to run a windows xp repair by using the original OEM window xp installation CD (sp2) when the system inside the computer is sp3 after I updated it long ago.

I followed the processes suggested by the following webpage.
http://www.windowsreinstall.com/winxphome/sp2sp3installxpcdrepair/indexfullpage.htm

It was all fine until Part 4 in that webpage. A BSOD popped out after the windows symbol in Part 3.
And I noticed some new sentences at the bottom of the BSOD which are like ?physical memory dump?.

Hopefully, solutions for all of this would be recommended by someone. I don?t even really dare to switch the computer back on now!

Sorry if I have posted in the wrong section of the forum. If I have done it, please move this post to the right section. Thank you in advance.

A:BSOD after restarting following a malwarebytes scan and BSOD after running windows xp repair

System manufacturer and model?

Generally...OEM disks do not allow for a "repair install", only a reversion to factory defaults which the system had when purchased.

All documentation (which I've seen) referring to a repair install of XP...assume that the user has a copy of MS Genuine Windows, not disks provided by an OEM.

Louis

Read other 5 answers
RELEVANCY SCORE 62

Hey guys!

I was browsing Facebook and exactly when I wanted to play a video I got this BSOD:

(It stuck on Initializing disk for crash dump so I force restarted the computer if this is for any help)

Could you help me find out why I got it and how to avoid it in the future?

Thank's

A:BSOD while browsing Facebook, STOP: 0x00000101; Image of BSOD attached

Hello LukaLean and welcome to the Forums,

Please follow the BSOD Posting Instructions and provide us with the .zip file created.
Good luck and keep us posted,
Nommy

Read other 6 answers
RELEVANCY SCORE 62

Hi Guys,
I am new to the forum,
My Pc started crashing recently after my old PSU(600w) busted and i replaced it(400w),The funny part about the bsod's is i get different codes each time....eg (d1 then a then 3b..etc) at first i thought it was maybe a virus... so I formatted The PC and then installed the latest drivers i could find for my PC...The results were only slightly different from the past (The computer would stay up a little longer before it crashed), I ran a memtest and RAM is fine, Then I thought it was my GPU overheating....So i cleaned the fans of both GPU and processor and Replaced the Old Thermal Compound.....Still no improvement... and here I am Now


My Specs:-
Motherboard:- Asustek P5Q Se
CPU:- Intel Core 2 Quad Q8300 Yorkfield
Socket :- LGA 775
GPU:- Nvidia GTX 460 2GB (ZOTAC)
RAM:- 2x2GB DDR2
HDD:-Seagate Barracuda 500gb

A:Random BSOD's while gaming and surfing web(BSOD Codes vary each time)

Code:
Host Name: TKMOHAMMED-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: TK Mohammed
Registered Organization:
Product ID: 00426-OEM-8992662-00497
Original Install Date: 4/17/2015, 1:19:57 AM
System Boot Time: 4/20/2015, 12:59:14 PM
System Manufacturer: System manufacturer
System Model: P5Q SE
Counterfeit installations such as yours contains heavily modified code that causes the installation to behave it unexpected ways. Analysing BSOD's and determining their causes on these sorts of installations is very unreliable.

My recommendation is to start with a clean slate, and install a genuine version of Windows. This will minimise the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable.

Read other 1 answers
RELEVANCY SCORE 62

64 bit, full retail.
Hardware is 1 month old (built myself)
OS was installed when I built it from a USB drive (did not include an optical drive in the build)
SPECS:i5 2500k
ATI 7850 GPU
corsair tx650 PSU
ASRock Extreme3 Gen3 motherboard
Corsair vengance 1600 ddr3 ram (2x4gb)
Coolermaster hyper 212 cooling unit
500gb Western Digital HD
64gb Crucial M4 ssd (OS is installed on this drive)
It was working fine the first 3 weeks I had the build, then I went on a vacation for a week. I come back, and the thing BSODs on me 6 times in an hour and a half.

First thing I tried was setting clocks back to normal (was at 4.3ghz on the i5, went back down to 3.3ghz) and it was stable for like 45 minutes after I did that, but it then crashed again. Also did a memory diagnostic test and everything was supposedly good.

My max temps with prime95 now are like 37 degrees celsius with RealTemp because I have the coolermaster hyper 212 as opposed to the stock cooler, so it shouldnt be crashing due to over heating.

Also: first crash occured firing up minecraft.

Thanks for any and all help guys.

A:BSOD semi-randomly. Self built computer. (BSOD dump.zip included)

Quote:
Also did a memory diagnostic test and everything was supposedly good.


Using which tool/software? You should run Memtes86+ for at least 7 Passes (Test each RAM stick individually)
RAM - Test with Memtest86+
Your BSODs are RAM/Memory related, rest your RAM settings to their default values in your BIOS. Stop any overclocking if any.

Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.
Note that this test may overheat the CPU, ensure proper cooling.

Post back with your results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CACHE_MANAGER (34)
See the comment for FAT_FILE_SYSTEM (0x23)
Arguments:
Arg1: 0000000000050853
Arg2: fffff88018cbc7a8
Arg3: fffff88018cbc000
Arg4: fffff80001ede67c

Debugging Details:
------------------
EXCEPTION_RECORD: fffff88018cbc7a8 -- (.exr 0xfffff88018cbc7a8)
ExceptionAddress: fffff80001ede67c (nt!CcLazyWriteScan+0x0000000000000188)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00... Read more

Read other 1 answers
RELEVANCY SCORE 62

This normally happens when I first start using the computer for the day. Sometimes when it happens there is a sound to it when it freezes but not always. Once the computer is going good for around 15-20mins then it no longer happens until the next reboot.

A:BSOD Screen freezes with red/blue/yellow horizontal lines then BSOD

Hi There,

Your video driver seems to be the problem,


Code:
BugCheck 1000007E, {ffffffffc0000005, fffff8800424f152, fffff880021b69e8, fffff880021b6240}

Probably caused by : atipmdag.sys ( atipmdag+39a152 )

Followup: MachineOwner
It is pretty old,


Code:
Loaded symbol image file: atipmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atipmdag.sys
Image name: atipmdag.sys
Timestamp: Mon Mar 29 05:26:02 2010 (4BB09C5A)
CheckSum: 0062931D
ImageSize: 0066F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
There doesn't seem to be an update from Gateway either.

Let's try uninstalling that driver and let windows install a WHQL driver,

How-To Uninstall AMD Catalyst Drivers From A Windows Based System

After uninstalling from programs and features,

1. Go to Device Manager and expand Display Adapters.

2. Right click on your adapter and choose properties.

3. Select the Driver tab and choose uninstall.

4. When finished, reboot the computer and let Windows install the available WHQL driver.

Read other 2 answers
RELEVANCY SCORE 62

Hi All,
 
I'm an experience computer user working in technical support and system administration in linux environment. 
 
This issue has me stumped.
 
My pc is refusing to boot, it will throw a BSOD moments after hitting the loading windows screen.
 
Start up recovery prompts to system restore, once this is complete it restarts with the same effect.
 
 
Repairing from the windows system disk has the same effect.
 
When booting into safe mode, the system will BSOD when loading aswRvrt.sys.
 
All BSODs happen too fast to read anything, not dumping physical memory.
 
This all started happening after a seemingly random BSOD which happened last night.
 
The only change to the system that I effected was installing a newsgroup reader this was done several hours before the first BSOD.
 
Any assistance would be greatly appreciated. 

A:BSOD on windows load - safe mode BSOD at loading Aswrvrt.sys

When you used the installation disc did you access the System Recovery Options and run the Startup Repair?

Read other 45 answers
RELEVANCY SCORE 62

I have a relatively new computer that I've built and I've been getting BSOD's for a while.

At first I thought it was because the pagefile was disabled, but that was just why they weren't getting logged to MiniDump. Then I got it enabled again and now I'm getting a lot of BSODs. It's been 0x3b ntoskrnl exe lately, but when I enabled driver verifier I was getting a different BSOD on each boot.

One of them specifically mentioned a .sys that I can't exactly remember. it was XXhalp.sys or something, and when I Googled it - everyone was talking about deleting monitor profiles from the registry and that somehow old monitor profiles were causing the BSODs, so I donno about that.

I would appreciate any help you can offer. I'll be actively monitoring this (and I'm currently in safe mode with driver verifier still enabled). So just let me know what you need.

Thanks,

Pseudo

A:BSOD Fairly Often. Driver Verifier Enabled = BSOD on Boot Every Time

Is there anything I can do to get someone to take a look at this?

Read other 9 answers
RELEVANCY SCORE 62

I was merely resizing a Windows Explorer window on the desktop when the monitor went black for 15-20 seconds, then the mobo splash screen came up, and Windows booted back up. The "Windows shut down unexpectedly" window came up and the details said it was a BSOD. The pertinent log files from the DM Log Collector app are attached.

*edit* I built this system over 3.5 years ago and I've never reloaded or reformatted anything in that time. Maybe it's about time to reformat C: since I have all my data files on a separate drive anyway.

Read other answers
RELEVANCY SCORE 62

Hello,

So first of all, I am not a computer wizard. Some terms I might not understand as i've never had a problem like this before, but i'll try to enlist as much information as possible.

Since last friday or so, i've suddenly encountered a BSOD. Now, i've had them before and it was only once. After a reboot it usually never happend again and everything was cool. But since friday, they popped up again. Mainly during playing Battlefield 1, but i've also had it happen during Dragon Ball: Xenoverse 2.

I've had multiple BSOD errors, which are:

- IRQL NOT LESS OR EQUAL
- BAD POOL HEADER
- MEMORY_MANAGEMENT
- SYSTEM_SERVICE_EXCEPTION
- APC_INDEX_MISMATCH

Now if it were one, I might've been able to pinpoint the issue, but.. They're constantly different errors that happen. Now, to explain a bit more in detail how it goes:

So i'm just playing a match of Battlefield 1. After 10/15 minutes give or take, it'll bring me to the blue screen. After processing whatever it has to process, computer shuts down and it starts to restart. At this point it will be stuck in an infinite restart loop, where my monitor will not display anything as well. It just says it's not connected to something, which it clearly is. After manually closing and rebooting, i'll have to do this a few times or mess with the HDMI a little bit before I get my monitor to pop up again. Once that happens, I get stuck in the beginning screen where you can see your HDD/SSD installed. It won't go further than that unless I ... Read more

Read other answers
RELEVANCY SCORE 62

Hi all, really getting a headache trying to fix my mums laptop out but I am struggling miserably.

I have no idea what she has done, obviously claiming to have done nothing but basically I got a text this morning asking me to take a look at the laptop because it wont turn on.

First thing is the Windows bootup screen, improper shutdown asking to boot in safemode/normal etc. I chose normal and just as it was about to boot into Windows a fast BSOD appeared for a split second and then the laptop restarted, to the same screen. This time I chose Last known configuration, same happened. The BSOD's were so fast I cannot get a glance at it.
I tried in safe mode and it seemed fine, but I didnt know what I should try to do. So I did a system restore and this worked ok but again it wouldnt boot up.

After hours of trying, I googled some and downloaded Windows Vista Recovery Disc and I attempted the Automatic System Repair but it told me failed to detect any problems. Tried it again, and same. So then I attempted to boot it back up, but nope. BSOD again.

The laptop did come with a typical recovery disc but I am unable to find that, and the Windows Vista label is stuck underneath the Laptop so I downloaded a copy of Windows Vista to install and I managed to format the harddrive.

Now this is what bugs me, I cannot even install a fresh copy of Windows, I am actually trying again as we speak but even whilst "Copying the files" on the Windows installation, it BSOD's on ... Read more

A:[SOLVED] Windows Vista - BSOD's while trying to bootup, now also BSOD's whilst reinst

Memory_Management

STOP: 0x000000001A (0x00041284. 0xA4884001....




I just tried again for 4th time and I managed to type this much above ^^ before the laptop restarted itself :(

Read other 17 answers
RELEVANCY SCORE 62

Is Windows 7 Professional 64bit

Fresh install but it is getting on
Full retail version?

Acer Aspire timeline X 5280tg Approx 18 months old.
OS age approx 12 months.

I get the BUGCODE_USB_DRIVER bsod and I had a previous blue screen error before this one is in dump files.

Tried memory tester and came up ok.

Help would be much appreciated.

A:BSOD Tribes Ascend, BF3, Random BSOD BUGCODE_USB_DRIVER Acer Laptop

Code:
sptd.sys Sun Oct 11 16:55:14 2009 (4AD24632)
Remove Daemon Tools/Alcohol 120%. The driver associated with it (SPTD) causes BSOD and it caused one of yours - DuplexSecure



Code:
athrx.sys Mon Oct 05 12:33:57 2009 (4ACA1FF5)
Update your Atheros driver. It caused a crash - Drivers for Atheros AR5B93 and Windows 7


Code:
atikmpag.sys Mon Jun 13 21:23:20 2011 (4DF6B808)
Update your video card - ATI Catalyst

Problem Devices

Code:
Device PNP_Device_ID Error_Code
Teredo Tunneling Pseudo-Interface ROOT\*TEREDO\0000 This device cannot start.
Microsoft 6to4 Adapter ROOT\*6TO4MP\0000 This device cannot start.
Microsoft 6to4 Adapter #2 ROOT\*6TO4MP\0001 This device cannot start.
Microsoft ISATAP Adapter ROOT\*ISATAP\0000 This device cannot start.
Microsoft ISATAP Adapter #3 ROOT\*ISATAP\0001 This device cannot start.

Code:
Event[4142]:
Log Name: System
Source: Disk
Date: 2012-02-19T21:45:23.424
Event ID: 52
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: LAPPY
Description:
The driver has detected that device \Device\Harddisk0\DR0 has predicted that it will fail. Immediately back up your data and replace your hard disk drive. A failure may be imminent.
Run a hard drive scan on all your drives. Also, I would back up any important information just in case your hard drive does fail
Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both lo... Read more

Read other 1 answers
RELEVANCY SCORE 62

After BSOD problems (0x00000050), I took my two month old Dell desktop back to Geek Squad under warranty. Said problem wasn't hardware, but software, and would charge to fix. I took it home and reinstalled Win 7. BSOD (0x0000007b) with a Dell installation CD, but otherwise fine except it keeps restarting itself at various intervals. When I tried installing drivers, it wouldn't recognize Ethernet card. Not sure what's going on. Wife thinks a no-name anti-virus CD will fix it all, but I'd appreciate your advice.
Attachment 229276

A:BSOD reboot, still BSOD problems & failure to recognize Ethernet card

Zip file uploaded to post above. Thanks.

Read other 1 answers
RELEVANCY SCORE 62

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

A:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static sound)

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, ffffe00154472028, bf800000, 124}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
I know you said you've run hardware tests, but in our experience you have to run specific tests according to a specific regime. Run all of these and report back.

RAM - run a minimum of 8 consecutive passes, no less
RAM - Test with Memtest86+

CPU - run the STANDARD test only
CPU - Stress Test Using IntelBurnTest

Video - run for 20 mins
Video Card - Stress Test with Furmark

Storage - run the SHORT test only using the DOS version
SeaTools for DOS and Windows - How to Use

Read other 3 answers
RELEVANCY SCORE 62

This has been extremely frustrating for me. I come home from working and my cousin tells me my computer keeps going blue and restarting. So now my computer will only run in safe mode. I have spybot/Kaspersky(won't run in safe mode)/AVS4 none of them seem to do the trick. From what I can tell it seems to be the win 32 virus, every time I get rid of it it seems to come back. I would get rid of it then my computer would be fine now it won't run in normal at all.

This is the message I get on blue screen (no images sorry)
STOp: 0x0000008E (0xc0000005, 0x8421C487, 0xC56F6DC, 0x00000000)
ataport.sys - address 84216487 base at 84216000 date stamp 4a5b6f16

My dvd drive does not work so reformatting at this time is not an option. Only thing I could think of is reformat using a thumb drive but all I have is a 1gb and I dont have the money to go out and buy a new one. So now im fresh out of ideas. Is there anyway I can fix this without going out and buying a new dvd drive/usb?

Also im running windows 7 ultimate and I get blue screen of death when running GMER in the middle of scanning so i cant upload a log from it. I can tell theres a rootkit installed atleast two because before it crashes it shows two on the hardisk along with other minor ones

.
DDS (Ver_2011-06-03.01) - NTFSx86 NETWORK
Internet Explorer: 8.0.7600.16385 BrowserJavaVersion: 1.6.0_23
Run by 1 at 21:20:41 on 2011-06-04
.
============== Running Processes ===============
.
.
============== Pseudo HJT Report =... Read more

Read other answers
RELEVANCY SCORE 62

I recently built a new system. When playing Bad Company 2 I have gotten a consistent BSOD about 1/2 hour into playing. I am not really familiar with BSOD codes and my computer restarted so quickly I was unable to get the exact code. When I play again I will try to get the code and add it to the post.

One thing I noticed when using the Forums System Specs is that it showed the Intel HD Graphics from the processor being the primary graphics with a current resolution of 1680x1050x32 while my Radeon 6870 was the secondary graphics with a current resolution of 0x0x0. I was under the impression that the Intel Graphics should automatically be disabled with the install of my 6870. Is it possible that the Intel graphics aren't being disabled properly and being overloaded when I play? Like I said I'm not too familiar with debugging and any help would be appreciated.

This is my first time posting, please let me know if there is any additional information that is needed and how I can gather it. Thanks!

A:BSOD during Bad Company 2, unknown error, jcgriff2 BSOD files attached

Sorry I forgot to add the System Health Report. Here it is.

Read other 2 answers
RELEVANCY SCORE 62

Hello,

You guys have been great before, and I hope that someone can help me tackle this.

My friend's computer started going weird after playing a game that uses Shockwave. (That's the last thing they remember...) When loading into Windows (regular mode), after selecting (any) user all you see on the screen is black with blue spots all over.

They're using an Asus P5DV2-VM SE motherboard
Intel E2140 (1.6GHz) CPU,
1GB DDR2
with a 450w PSU.

Originally I thought it was video-driver related as they're using the onboard graphics card. It's a Via P4M890-based motherboard although it has a PCIe expansion.

Loading in safe mode usually works, and loading into VGA mode got me into Windows however I received a 0x8E pretty quickly. At some point I also received a 0xA3. I tried uninstalling the video driver (Via Chrome9). That allowed me back into regular mode but soon after I got a BSOD. I tried running System Restore from safemode and I got 0xA3 (ACPI_DRIVER_INTERNAL) but I can't find info on fixing this one.

Thanks in advance,
Ram

A:Bsod 0xa3 And 0x8e - Unusual/unclear Picture And Random Bsod

0x8e errors are usually caused by driver issues. Here is what Microsoft says regarding 0xa3 errors:An inconsistency in the ACPI driver is so severe that continuing to run would cause serious problems. One possible source of this problem is a BIOS error.Drivers and Windows interacts with the BIOS. Have you tried a BIOS update? Usually this is not recommended as it can cause serious issues if the update is not performed correctly, but is recommended when the BIOS is suspected to be the cause of an issue such as this.EDIT: all you see on the screen is black with blue spots all over.I just remembered having an issue like this, and it was corrected by simply reseating the video card. Just thought I would mention this.

Read other 7 answers
RELEVANCY SCORE 62

Hi,

My computer has been unstable for quite some time and after memory tests, changing graphics cards, many driver variations and a couple of fresh OS installs a while ago it is still not stable.

The difficulty is that it doesn't seem to be triggered by anything specific so it makes debugging really difficult... sometimes it crashes twice a day then not for another week or two.

Please help me shed some light on how this could be resolved as I am considering stripping the PC down to its components, selling them and buying a pre-built system instead.

Thanks
Henry

A:BSOD randomly (no specific trigger) Commonly an IRQL issue on BSOD

Welcome aboard.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a039d89ab61a11, b3b7465eed34644b, fffffa8005567960, 8}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------
According to carrona.org, STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)

Let us search for a faulting driver first.
Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

Read other 9 answers
RELEVANCY SCORE 62

Hello,

After doing a lot of forum surfing, I have yet to find anything that's worked to get rid of this error. My goal is to get the data off of my drive.. the problem:

I am (not) running XP Pro (not sure what sp.. 3 at one point, but I might have uninstalled it) on a dell poweredge 400sc.

Bios recognizes my hard drive, which is a SATA 400gb (No way to run as a slave with an ATA .. so I've read ..?)

I am getting a BSOD (0x00000050) when booting normally. It flashes for just a quick moment after a few seconds of the XP logo.. then computer restarts.

Computer restarts without showing a BSOD when I try to boot in safe mode.

Computer shows BSOD when plugged into the usb port using a external case. (my other *ATA* hard drive runs windows just fine on this computer) Same thing happens when plugged into a different computer.

Computer shows these errors when I try to use recovery console from my XP CD:

0x000000D0
0x000000E3
0x000000D1
.. I think it's shown the 0x00000050 before.. It's been different almost every time I let the CD load today, but one time it was in OS install mode cause I thought that might help..

I can't seem to get this thing to work. Before this happened my computer was acting really slow; dragging a window around or making selection box on the desktop would make things all skippy and send the cpu to the upper 90s with nothing else running. The BSOD started when I tried to run the SATA as a slave to my ATA.

Am I going to have to send my drive in ... Read more

A:BSOD Stop:0x00000050 Page_Fault_In_Nonpaged_Area [moved from Vista/ Windows 7 BSOD]

0x50 = invalid memory referenced
0xd0 = kernel attempted to access invalid memory
0xe3 = thread tried to release a resource it did not own
0xd1 = kernel-mode driver attempted to access invalid memory

Test RAM - Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html

Regards. . .

jcgriff2

`

Read other 1 answers
RELEVANCY SCORE 62

Hello,

A very strange and quite permanent problem with using Windows Live Messenger has occured recently. When I log on, I can use it like normal for 5 minutes or so, then the whole computer starts freezing up (While Alt-Tab command still works). Then the mouse input is disabled. Then I get a BSOD (The first two times the computer started acting weird however I got a remote procedure call as opposed to a BSOD).

I have been able to use Windows Live Messenger for a long time, until recently (Less than a week ago) when I got a BSOD usually calling 0x00000077 (Kernel_Stack_Inpage_Error) or a 0x0000007A (At one instance).

An example of a full BSOD code with parameters is 0x0000007A (0xE1E6E990, 0xC00000B5, 0xBF929C0B, 0x37490860); with the 0x7A BSOD the affected file was win32k.sys at address BF929C0B with base at BF8000000, datestamped 45F013f6.

Today I also got a BSOD logging into hotmail.

The computer otherwise works as normal as long as I do not remain online for too long in hotmail, or when refraining from using the Live Messenger client. I have uninstalled and reinstalled Live Messenger in case that would have been the problem. I also reinstalled Firefox to its latest version 3.6.14. The problem persists still.

I have searched for viruses with the latest definitions, and I have updated Spybot S&D likewise and searched for spy- and malware. The computer is apparently clean. I have run CHKDSK with the /F-flag enabled on startup and no sectors were damaged... Read more

A:Windows Live Messenger recurring BSOD 0x77 or 0x7A Problem [moved from BSOD, Crashes]

Quote:





Originally Posted by dppp


I have been able to use Windows Live Messenger for a long time, until recently (Less than a week ago) when I got a BSOD usually calling 0x00000077 (Kernel_Stack_Inpage_Error) or a 0x0000007A (At one instance).

... the 0x7A BSOD ... win32k.sys at address BF929C0B with base at BF8000000, datestamped 45F013f6.




Bugchecks 0x77 & 0x7a are very similar = kernel data from the paging file could not be read into memory.

win32k.sys timestamp 0x45f013f6 = Thu Mar 08 08:47:34 2007

Install all outstanding Windows Updates, including XP SP3.

www.update.microsoft.com

Regards. . .

jcgriff2

`

Read other 5 answers
RELEVANCY SCORE 61.6

ntoskrnl.exe+18c453
Funny thing is that i have router and bsod happens parallel(not always) on both computers
///
please help

A:BSOD while browsing/downloading torrents hal.dll+12a3b bsod/ntoskrnl

Hi,
Unfortunately the installation is counterfeit.
The Key is that of a Dell OEM computer - and the motherboard is a retail one by Asus.



The best course of action is to:Purchase a legitimate Windows 7 licence.
Format the HDD.
Reinstall Windows and activate.

Read other 6 answers
RELEVANCY SCORE 61.6

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

A:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static

Hi irunebar12 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
Error : DCACHEL0_WR_ERR (Proc 7 Bank 1)
Status : 0xbf80000000000124
Address : 0x0000000101d80bc0
Misc. : 0x0000000000000086


The dumps are consistent with the error that there was a problem in writing to the L0 Cache of the CPU. That is a dead CPU and hence you are getting the errors even after a fresh install.
See if you are getting any errors in Prime95 according to the below (thanks usasma) -






Prime95 download site: GIMPS - Free Prime95 software downloads - PrimeNet
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
Monitor the CPU temperature and DON'T let it exceed 85?C. If it do... Read more

Read other 3 answers
RELEVANCY SCORE 61.6

Hello,
As the thread shows im having lots and lots of little(and big) crashes.

Im attaching the SF log and any help will be appreciated

Many thanks,
Dimitris

A:BSOD-PC Freezes randomly-Driver Verifier BSOD's at User Log-On

Added a zip file with three minidumps as i forgot that ive changed the default location of systemroot/minidump to a different disk as im not using virtual memory on os disk

Read other 7 answers
RELEVANCY SCORE 61.6

Short version: My PC is getting a BSOD at random times when full screen gaming. The BSOD screen says the video card times out.

Long Version:
I have a gaming PC that a friend generously gave me when he built a new one. It's worked great, but in November the Tagan ITZ 700 watt power supply died. He had planned to do SLI and never did, so during Neweggs holiday sale I picked up a Corsair Enthusiast Series TX650 thinking it should be sufficient.

Everything has run smoothly with the new PSU except for the fact that when playing games like Torchlight 2 and Starcraft 2, my machine will BSOD. I had random BSOD's with Starcraft 2 and then suddenly had 4 nights in a row with no problems and then today it keeps crashing at the same spot in the campaign. There is little consistency to the crashes other than that and under normal operations, like email, web browsing, etc, it has only BSOD'd once and that was during a youtube video.

My first thought is that the one thing that has changed recently is the PSU and prior to that I only recall a rare crash here and there. I thought maybe my new PSU wasn't good enough, but everything I've read online about the requirements for the GTX 460, including the manual, say 450 watt minimum and I exceed that.

Here is a list of things I have tried:

- Updated video card and mobo drivers, I have also uninstalled the nvidia drivers, run Driver Sweeper in safe mode, and reinstalled drivers in normal mode.
- Ran GPU-Z to look at temperatures and ran... Read more

A:Random BSOD when playing games, persistant BSOD with Starcraft 2

Hello Haze.

Click Start.
In the search bar, Typr "services.msc" without quotes.
Click the resulting link.
When the windoe will appear, scroll down to "nvidea update service daemon"
Then do it:
Does it change the situation anyhow? Let us know.

Read other 9 answers
RELEVANCY SCORE 61.6

Corrupted WoW patch 5.3 caused my game client and eventually entire computer to lock up upon loading into game, resulting in a BSOD.

I redownloaded and installed the entire game client and it solved the problem of the game locking up.

Everything seemed fine until this morning when I woke up to another BSOD. So I thought I would post the dumps and see if anyone had any idea what caused this one and/or the first one.

Thanks in advanced!

A:BSOD after corrupt World of Warcraft patch, 2nd BSOD days later

It appears that your Asmedia USB 3.0 driver caused the BSOD:


Code:
*** WARNING: Unable to verify timestamp for asmtxhci.sys
*** ERROR: Module load completed but symbols could not be loaded for asmtxhci.sys
ERROR: FindPlugIns 80070005
ERROR: Some plugins may not be available [80070005]
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff8800721b716, fffff88002923708, fffff88002922f60}

Probably caused by : asmtxhci.sys ( asmtxhci+1b716 )

Followup: MachineOwner
---------
Driver Reference Table - asmtxhci.sys

Looking at the driver we can see it is rather old:


Code:
kd> lmvm asmtxhci
start end module name
fffff880`07200000 fffff880`07264000 asmtxhci T (no symbols)
Loaded symbol image file: asmtxhci.sys
Image path: \SystemRoot\system32\DRIVERS\asmtxhci.sys
Image name: asmtxhci.sys
Timestamp: Wed Sep 14 03:36:09 2011 (4E705969)
CheckSum: 0006E608
ImageSize: 00064000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please upda... Read more

Read other 3 answers
RELEVANCY SCORE 61.6

I was just playing around with my laptop and I received the dreaded BSoD. The error I was given was APC_INDEX_MISMATCH with the hexadecimal code 0x00000001. I have had this had to my laptop multiple times and I am asking if someone could please help. I also had to add the "Seven Forums" zip file made by using SF Diagnostic Tool.

A:BSOD Messing aroung on my Pavilion dv7-3165 then bsod with 0x00000001

Welcome
We dont have the files that you said you added.

Read other 3 answers
RELEVANCY SCORE 61.6

Here's the clif notes: Got a brand new (not refurb) lenovo desktop. win 7 62 bit - blue screen all the time, random times. I'm not a gamer, i had very little installed.

Took a picture, called support with the code, they sent a guy out and he replaced my motherboard. All seemed good - for a few hours. Got two new bsod. Attached are the 2 recent minidumps and a screenshot of my specs, and that other file requested.

Hope you guys can help. I am still under warrantee and can probably raise hell and get another new machine, but it's been 3 weeks and I just want to use the thing

Thanks

A:New Lenovo - BSOD, Warrantee Replaced Motherboard, New BSOD 3 weeks

Hello, welcome to SevenForums!

Nothing shown as far as processes go, and you have a 109* critical structure corruption bugcheck for one of the two dumps, so it's most likely hardware related, usually memory of hard drive.

I would recommend running Memtest to ensure your memory isn't faulty.

Check your hard drive for any errors as well with chkdsk:

Open the "Computer" window
Right-click on the drive in question
Select the "Tools" tab
In the Error-checking area, click <Check Now>.
Drivers in need of update:





Quote:

LVUSBS64.sys - LVUSBS64 Thu Oct 11 21:39:40 2007 (Logitech Camera driver). Update here.



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff960001360e8, Address of the instruction which caused the bugcheck
Arg3: fffff8800a9cad00, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTIO... Read more

Read other 6 answers
RELEVANCY SCORE 61.6

Have a rather annoying problem.
System details:
- Windows 7 x86
- Intel Quad Core Processor
- nVidia 9800GT
- 1TB Seagate HDD (brand new)

Right so when I turn on the computer. It'll load up fine, no problems, log in to my account and desktop loads fine. I might be able to run Firefox to browse the web. However within 3-4 minutes of Windows starting, it will freeze and I can only move the mouse, however clicking anything is useless, even dragging the mouse on the desktop doesn't work. Task Manager doesn't open either on Ctrl+Alt+Del, even on a Non-USB keyboard. The mouse is movable for 4-5 minutes before I get a Bluescreen of death and system restart.

On restart, BIOS hangs on "Memory runs at dual channel interleaved", and doesn't seem to detect the HDD. After 30 seconds it'll flash and give me a SYSTEM BOOT FAILURE PLEASE INSERT SYSTEM DISK AND PRESS ENTER.
I actually got out the system disk and popped it in, pressed Enter and it gave me the same message.

If I turn off the computer and leave it off for 10 minutes. I can boot successfully again, HDD detected, boot up to Windows again, log in, but the system freezes again. It did the same yesterday, however took longer to crash, so I did a Full system scan with Avast which turned up no viruses, trojans or infected files.

Honestly I really don't have any idea what it could be.
If any more info is needed, please ask I'll reply ASAP.

A:Bios Hang, Windows 7 freeze, BSOD. BSOD on Safemode.

Sounds like it could be something heat related. Is this a laptop or desktop?

Read other 3 answers
RELEVANCY SCORE 61.6

Hey, so I was playing SWTOR and I got the BSOD. It has occurred several times in the past day. Here is the information.

I have run memtest already and have had 0 errors. I have all my drive up to date. I also reformatted my computer-NOT REPAIR, but FULL WIPE.

I have attached information via the instructions in thread.

Thank you for your time.

A:BSOD playing SWTOR, BSOD error SYSTEM_SERVICE_EXCEPTION (0x0000003b)

The crash dump blames hardware.

Re run these tests again

RAM - Test with Memtest86+

errors might be detected after 7 passes

Do this overnight

Also

Hardware - Stress Test With Prime95

Read other 9 answers
RELEVANCY SCORE 61.6

The system just bsod while watching video on chrome. The bluescreen was locked with a sound repeated in background. It did not restart itself as is normal.

I have recently updated my video drivers and I believe all other drivers to be current. I recently ran memtest 86+ for 7 full passes with no errors, but it could still be the memory as the modules are new(about a month).



Ignore the old minidumps as they are the result of tweaking/overclocking my system. The dump of interest is from today and is attached separately from jcgriff.

My system is the same as in my user profile.

Win 7Ultimate 64bit.
Microsoft security essentials and Malwarebytes are used for realtime protection and scanning.

This is the first non OCing bsod I've had on my rig in a long time,

Please help

A:BSOD in chrome playing vid, BSOD locked with sound in background

  
Quote: Originally Posted by Beast52702


The system just bsod while watching video on chrome. The bluescreen was locked with a sound repeated in background. It did not restart itself as is normal.

I have recently updated my video drivers and I believe all other drivers to be current. I recently ran memtest 86+ for 7 full passes with no errors, but it could still be the memory as the modules are new(about a month).

Ignore the old minidumps as they are the result of tweaking/overclocking my system. The dump of interest is from today and is attached separately from jcgriff.

My system is the same as in my user profile.

Win 7Ultimate 64bit.
Microsoft security essentials and Malwarebytes are used for realtime protection and scanning.

This is the first non OCing bsod I've had on my rig in a long time,

Please help


Unfortunately the most recent was inconclusive. We can do some testing while waiting for the next one. Most often it is memory or driver related.

Please run these two tests.

1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

... Read more

Read other 6 answers
RELEVANCY SCORE 61.6

I'm trying to fix my friends Inspiron that has the BSOD. He's been getting it since November and did not know what it was so he just ignored it and kept rebooting it until the message happened to not show up. You can go into Safe Mode perfectly fine with no BSOD. Unfortunately I have no idea what to do. I can't do a system restore back to November. I can't figure out which driver it is and I know it's not one you need since Safe Mode is fine. Unfortunately Windows 7 doesn't give you the yellow marker next to drivers anymore. Anyhelp would be appreciated; especially since this is my first time and I hope I did everything right. If I did anything wrong forgive me. Thanks guys!

The error message is 0x0000001e (0xFFFFFFFFC0000096, 0XFFFFF80002EA75CA, 0X0000000000000000, 0X0000000000000000)

A:BSOD after logging in normally. NO BSOD in safe mode. Error 0x0000001e

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 1 answers
RELEVANCY SCORE 61.6

? OS - Vista/ Windows 7 ? Windows 7 64-bit ? x86 (32-bit) or x64 ? 64bit ? What was original installed OS on system? Windows 7 64 bit ? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full retail ? Age of system (hardware) HDD brand new, rest of system around 4 years old ? Age of OS installation - have you re-installed the OS? Fresh installation few weeks ago ? CPU: Intel Quad Core ? Video Card: Nvidia GeForce 9800 GT ? MotherBoard: Gigabyte GA-G31M-S2L ? Power Supply - brand & wattage
ATX 620
AC input: 230V 50Hz 5A
DC Output: +3.3V +5V +12V -12V -5V +5Vsb
22A 40A 27A 1.2A --- 2.3A
? System Manufacturer : Custom built ? Exact model number (if laptop, check label on bottom): Custom built
Right so when I turn on the computer. It'll load up fine, no problems, log in to my account and desktop loads fine. I might be able to run Firefox to browse the web. However within 3-4 minutes of Windows starting, it will freeze and I can only move the mouse, however clicking anything is useless, even dragging the mouse on the desktop doesn't work. Task Manager doesn't open either on Ctrl+Alt+Del, even on a Non-USB keyboard. The mouse is movable for 4-5 minutes before I get a Bluescreen of death and system restart.

On restart, BIOS hangs on "Memory runs at dual channel interleaved", and doesn't seem to detect the HDD. After 30 seconds it'll flash and give me a SYSTEM BOOT FAILURE PLEASE I... Read more

Read other answers