Over 1 million tech questions and answers.

A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error.......

Q: A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error.......

This error has been on going and I finally gave some time to it...
Issue occurs when trying to create a Restore Point.
There are 3 errors with the same time stamp in my windows logs.
Applications - The first one on the list in event viewer is "Volume Shadow Copy Error: An error 0x00000000c000014d was encountered while Registry Writer was preparing the registry for a shadow copy. Check the Application and System event logs
for any related errors".
Applications - The second one is "A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried, the error is likely to reoccur".
System - The last one "An I/O operation initiated by the Registry failed "unrecoverably".The Registry could not flush hive (file): '\Device\HarddiskVolume1\Boot\BCD'" - The research on this one led to resolution.
In my case the resolution was to move the Boot\BCD on the 100 mb Reserve Drive to C: drive. I found it easier to use easy bcd. Once windows rebooted it came up fine with C: Active. I was able to successfully create a restore point and implement with 100%.
This solution may be a problem if Bitlocker is being used. I finished off with formatting 100 mb hidden reserve partition in ext4.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error.......

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 88.4

Hi, recently, i just purchased a DVD writer. I have a problem when burning a cd with the DVD writer. I will get a DMA-driver error, CRC error. I am using a 40-conductor cable, and set it as master (secondary cable).

Could it be the 40-conductor cable that is causing this problem? Do i need an 80-conductor cable?

Thanks in advance.
 

A:DVD WRITER - DMA-driver error, CRC error when burning CD

If it always reports a driver error you need to eliminate this first.
Check the device manager and make sure it is not showing the drive as non-functional (Control Panel > System > Hardware > Device Manager). If it shows a yellow ? the click to reinstall the drivers for it. Windows provides the drivers for optical drives.
An 80 core cable might be the problem but this depends on the drive. Can you borrow one to test it with?
Final option is that the drive is faulty.
 

Read other 6 answers
RELEVANCY SCORE 88.4

I have a Dell 8100 XPS and when the hard drive went, I restored from an August backup (using Microsoft's Windows 10 backup) afetr replacing the drive. Unfortunately, I had a problem with the Ethernet adapter so eventually, I reinstalled Windows 10 fresh. The only major problem is that the machine recognizes the drive ( Liteon iHOS104) as a reader.

This is possibly because the 8100 does not officially support Windows 10 (according to Dell).

Is there any way to get it recognized as a writer?

A:CD/DVD Writer/BD Reader Not Recognized as Writer By Dell 8100

Try this:
Solved DVD drive missing - Windows 10 Forums

and this:
[FIX] Optical Drives (CD/DVD) Icon Not Showing in My Computer Window - AskVG

Read other 0 answers
RELEVANCY SCORE 88.4

I'm trying to figure out the best way to permanently delete Microsoft Office Document Image Writer & Microsoft XPS Document Writer. Getting rid of them once doesn't seem to be enough, as they always reappear. I guess Windows Update brings them back. I've found a couple of vbs lines that can be added to the login script, but they involve running prnmngr.vbs, which is apparently very long and can cause system delays. Maybe there's something simpler?

If this has been covered before, I'm sorry to repeat it. I did some forum searches and came up empty. Thanks for your time!

Read other answers
RELEVANCY SCORE 87.6

I have never had a problem writing cd's in the past and i usually just use windows media player. Just recently i took apart my computer and gave it a good dusting. I went to burn a cd the other day and it said that there was an error when attempting to burn the disc. Any suggestions here? Never had a problem before. Did i maybe plug it into the wrong slot on the mobo?
 

A:cd writer error

btw it reads discs fine... i put the blank in and it recognizes it.
 

Read other 1 answers
RELEVANCY SCORE 87.6

I'm having trouble writing dvd's. I installed my old writer on a different pc and now i can't write anything. I had the same problem with the previous writer, so it can't be the writer.
OS: win 7 using Nero 8, LG writer

Here is the log:

1K22-0867-0795-66M4-5827-4567-****
Windows XP 6.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.1.1.4
Internal Version: 8, 1, 1, 4
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : QXMBS 0LMB4TMNC 1.03 akbnoiej Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B F: CdRom0
QXMBS 0LMB4TMNC G: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572408kB)
Free physical memory: 858MB (879348kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.1.2010
ISO compilation
8:01:11 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:01:12 PM #2 Text 0 File Isodoc.cpp, Line 6671
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
M... Read more

A:DVD writer error

Read other 8 answers
RELEVANCY SCORE 87.6

Hello guys i am new 2 this forum pls help me out...
Configuration: intel core 2 quad 2.4 ghz, intel dg33fb motherboard, 1 sata hdd 500 gb cgate and 1 asus drw 2014L1T (lgt Scribe)
my dvd rom doesnt read ny cd or dvd in windows xp. it shows the dvd rom but whn i insert cd or dvd it doesnt read. the only dvd it reads is windows vista dvd...
dont knw wats wrong wid it. it doesnt even read motherboard cd.
i thought it may be some driver problem i tried in vista stil doesnt work.. pls help me out or let me knw if it needs to be replaced....
Thanks in advance....

A:Dvd writer Error.. in Xp

Try deleting the Upper and Lower filters.

http://support.microsoft.com/?scid=k...060&x=12&y=13#

Read other 1 answers
RELEVANCY SCORE 87.6

I have ASUS DRW-24B1ST & its giving me problem from past few days.

when i am inserting a cd into my drive cd shows the auto run window but there is no option to open cd in folder as well if try to open cd with double click its asking me that "How you want to use this disk ?" as well even if cd is full oor have some data its showing cd is empty.

I try many Cd's but same problem.

Check screenshots for more info.

A:DVD writer error

I sometimes have an issue similar to this, so I never use the Windows burn software. Never could diagnose the problem because I have the worst luck with CD/DVD drives and don't use them anymore. I use Roxio or other programs designed for specific files likes ISO's.

Read other 9 answers
RELEVANCY SCORE 87.6

Okay, let me see if I could get this right -- Hi!
I'm hoping someone could help me correct this error - as Microsoft has no information on the subject and very difficult to reach.

This is the error I receive every boot up -

MESSAGE BOX TITLE reads:
SQL WRITER

error message in the box:
SQLDUMPER LIBRARY failed initialization. Your installation is either corrupt or has been tampered with. Please uninstall then re-run setup to correct this problem.

Ok, now, that would be done, if I could find the file. This morning I found the sqlwriter.exe - but not sure i want to mess with the file, wouldn't know what to do with it.

I think this problem began after I installed my new Wacom tablet or Logitech wave keyboard (Saturday) - i don't know, but if anyone can help me figure out this gliche I would greatly appreciate it.

My Operating system is Windows XP, I use Micorsoft Office 2007 , Adobe editing softwares, updated my graphics card a while ago - and work with two monitors.

So please contact me as soon as possible, I have no idea how to resolve this.

Lisa~
 

Read other answers
RELEVANCY SCORE 87.6

OS used: Windows XP

Error shown on starting:

"SQL Dumper library failed initialzation. Your installation is either corrupt or has been tampered with. Please uninstall then re-run setup to correct this problem"

pls help...
 

Read other answers
RELEVANCY SCORE 86.8

hey was burning cds the whole time. But the past week wasted more than 10 cds nero gets me to 19% and just stops. the log is down here. Plssssssssss helppppppppppppppppp

1:38:03 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:38:03 AM #17 Text 0 File Mmc.cpp, Line 18724
Set BUFE: supported -> ON

1:42:25 AM #18 SCSI -1135 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04600000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0xC0 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

1:42:25 AM #19 CDR -1135 File Writer.cpp, Line 335
Write error

1:42:25 AM #20 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

1:42:26 AM #21 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader

1:42:26 AM #22 CDR -201 File WriterStatus.cpp, Line 193
Invalid write state

1:42:26 AM #23 TRANSFER -18 File WriterStatus.cpp, Line 193
Could not perform EndTrack

1:42:26 AM #24 Text 0 File Mmc.cpp, Line 13731
<HL-DT-STRW/DVD GCC-4481B> start Close Session

1:42:28 AM #25 SCSI -1106 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)... Read more

A:cd writer error out of the blue

"Power calibration error"
Either its poor quality CD Media, or the CD drive is dying in most cases to see that error.

If its CD-RW media, the wrong speed can also give it (fast media, slow burner)
 

Read other 1 answers
RELEVANCY SCORE 86.8

Hello,

Everytime i open my computer, it appears a message that says:
"SQLdumper library failed initialization. your installation is either corrupt or has been tampered wit .Please uninstall then re-run setup to correct this problem.) I have Windows XP Media SP2 and Office 2003 on my computer;

Please does anyone knows what should i do????
Please i need help, is urgent!!!

Ana Ribeiro.
 

Read other answers
RELEVANCY SCORE 86.8

I have a HDC-SD100P/PC camera and have installed HD Writer 2.6E. I can connect the camera to my Compaq 610 laptop (with Vista installed) and read the card fine. However when wanting to read into HD Writer 2.6E or Windows Movie Maker they will not recognise the camera. HD Writer shows the message: "Cannot be worked as the TV system has a different image". Does anyone know what this means and how I can correct this????

A:Image error with HD Writer 2.6E

I have the same problem with the same camera. When I installed HD Writer I selected United Kingdom (PAL) which is the TV system I use. Maybe I should have selected something different! Is the camera TV system different from the TV you want to view your video on?

Read other 1 answers
RELEVANCY SCORE 86.8

Well on Startup comes this error
This image has been resized. Click this bar to view the full image. The original image is sized 792x128 and weights 13KB.

Its not that big deal but if i get rid of it i wont have any errors for now anymore xD

Note: This Shows 1 time on startup
 

A:Sql Writer Startup error

Open Add/Remove Programs, locate any reference to Microsoft SQL and uninstall it.

Restart your computer.

If you keep getting the error message, then try this:

Click Start > Run and type services.msc and click OK.

Look for Microsoft SQL Server VSS Writer.

Double-click the entry and change the Startup type to Disabled, click OK.

Restart your computer, hopefully the error message is gone.
 

Read other 2 answers
RELEVANCY SCORE 86.8

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz, x86 Family 6 Model 15 Stepping 2
Processor Count: 2
RAM: 3325 Mb
Graphics Card: Radeon X1300 Series , 128 Mb
Hard Drives: C: Total - 67734 MB, Free - 21234 MB; H: Total - 8573 MB, Free - 5840 MB;
Motherboard: Intel Corporation, DQ965MT, AAD36265-504, AZMT713000JJ
Antivirus: PC Tools AntiVirus Free, Updated: Yes, On-Demand Scanner: Disabled

this error message appears when I start my laptop; it is fairly recent. Any suggestions?
 

Read other answers
RELEVANCY SCORE 86.8

"When I boot my laptop up, I get the following error: SQL WriterSQLDUMPER" -- because it falls within my area of expertise. I just need a few more details about your situation and I will get to work!

This is with windows XP and IE is my default browser.
 

Read other answers
RELEVANCY SCORE 86.8

Every time when i put CD or DVD in to my PC DVD ROM it shows this kind of ("desktop.ini") file to waiting for burn. But that CD or DVD already burned. Why is that. That ""desktop.ini" file contain this kind of words.

"
[.ShellClassInfo]
[email protected]%SystemRoot%\system32\shell32.dll,-21815
"

How do i remove it. Is it mallware effect?

A:Why DVD Writer show this error?

I have noticed that too, but I doubt it's anything like malware. But pray tell can anyone answer what it is???

Read other 2 answers
RELEVANCY SCORE 86

I have a 'Benq 40x12x48' cd writer

I use Nero burner 5

I cant seem to succesfully write any cd's.
I tried writing a data cd at 8x but it gave an error message saying sumthing like 'fixation error'
i tried at 4x same thing.
earlier i got ONE succesful write at 4x.

is there a possibility that there is sumthing wrong with the writer... or is nero screwing it up?

oh yea, and it isn't that it is underbuffering or watever, and the cd's i use are fine... so it has to be sumthing wrong wit my end...

if my explanation wasn't clear enuff tell me, ill post it more clearly...

thanks loads...
:
 

A:CD Writer problems - 'fixation error' ?

Read other 13 answers
RELEVANCY SCORE 86

Hi
I've got a new CnM DVD burner, have downloaded CheetahBurner and get the following error:
Device Error16711680) Could not write to Disc (LBA: 0 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF0079

I have an old Dell Latitude C800, running XP Prof.

I've tried installing the drivers on the included disc, even though they seemed to be only for Vista - still no use.

Having had a quick search on Google, there's a lot of this Dev/error number but I can't see that there's a lot of actual response or help about it. What is it normally? An incompatibility issue? Is my laptop to underpowered (the box didn't suggest any CPU size)? Is it just a random media failure, cured by assigning the current one to the coaster pile?

Having said that, I'll try another disc now......
 

Read other answers
RELEVANCY SCORE 86

When i connect SATA DVD-Writer an error message showing

'Booting Error: 5S/5P'

Intel DG33FB
Pentium Dual Core E2100
Sony DVD Writer
DDR2 - 667MHz - 1GBX2
 

A:Error when connecting SATA DVD-Writer...

When i connect SATA DVD-Writer an error message showing

'Booting Error: 5S/5P'

Intel DG33FB
Pentium Dual Core E2100
Sony DVD Writer
DDR2 - 667MHz - 1GBX2

Somebody please help
 

Read other 2 answers
RELEVANCY SCORE 86

my computer with xp was running fine until i found that it was not showing my cd drive.
i;ve checked the neccesary connection and they were all fine. the device manager shows the drive with a yellow sign giving error code 39 which says that driver is corrupt or missing. now my cd drive is a plug and play and does not have any driver bundled with it. uninstalling and reinstaling the drive wont help. xp detect the new hardware at the start up but again same problem.

i wanted to reinstall xp but since cd drive is not available i tried to run it from hard disk. but it too was not running. i dont know these problem are connected or not but please help.
 

A:cd writer driver error code 39

Read other 11 answers
RELEVANCY SCORE 86

I used to be able to open "msg" files. At some point in time this quit working, so when I get an "msg" attachment to an email (or I copy an Outlook email to my hard drive), when I try open that msg file, nothing happens. I've tried re-assigning the msg files to the Outlook.exe file but it still won't open. Can this be fixed?

I also have another problem. I used to be able to place a blank CD in my CD/DVD writer and copy/burn files to it using the Windows XP interface. I am no longer able to do this and as soon as I place a blank CD and go to the drive letter through explorer, I get the error message "D:\ not accessible, Incorrect Function". I have to use a third party software to be able to write (Roxio), which I've always had installed on the machine so I was able to chose whether to use Roxio or Windows. Any clue how to fix this? Thanks in advance.
 

Read other answers
RELEVANCY SCORE 86

Hey guys,

My PC has been displaying this message during start-up... any suggestions?

SQL Writer

"SQL Dumper library failed initialzation. Your installation is either corrupt or has been tampered with. Please uninstall then re-run setup to correct this problem"
 

A:SQL Writer Error Message During Start-Up

look at this Discussion :

http://aumha.net/viewtopic.php?p=152710&sid=2eb6279948e1ea213f171600912b372d
 

Read other 3 answers
RELEVANCY SCORE 86

I have recently been having problem burning DVDs and keep getting communication error messages from Nero. I have changed the DVD drive and tried different media but still I get the problems. Also tried Nero 6,7 and 8, all fail.
Any ideas of what could be causing this? Thanks...

PC Spec:
AMD 64 4200
3GB RAM
Liteon DVD-RW 20x
Asus Motherboard
Radeon 9800 Pro Grpahics
Maxtor 250GB HDD
XP Pro

The log from Nero is:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12d
(Nero Express)
Recorder: <ATAPI DVD A DH20A1L> Version: WX11 - HA 1 TA 0 - 6.6.0.12
Adapter driver: <nvata> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <ATAPI DVD A DH20A1L >Version: WX11 - HA 1 TA 0 - 6.6.0.12
Adapter driver: <nvata> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : ATAPI DVD A DH20A1L nvata Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 6V250F0 nvata Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD A DH20A1L E: CDRom0
=======================

AutoRun : 1
Excluded d... Read more

A:Communication Error DVD Writer Nero

Can be a faulty DVD Drive data cable
Or the DVD Drive is not jumpered for Master (little jumper at the end of the DVD Drive)
Or the DVD drive requires a firmware update (but using the older version of Nero, I suspect not this)

Not sure why your nVidia video driver nvata.sys was mentioned
 

Read other 2 answers
RELEVANCY SCORE 86

TSSTcorp CD/DVDW TS-H652M ATA Device driver

Windows cannot initialize the device driver for this hardware. (Code 37)


Tried updateing the driver but it says I'm up to date. I'm at a loss. I'm no noob when it comes to my computer but I'm stumped on this one.

A:DVD writer error 37 cannot initialize driver

Hi -

Are you running Vista or Windows 7?

Are all Windows Updates installed?

www.update.microsoft.com

If Vista, you should have both SP1 and SP2 installed.

http://jcgriff2.com/0x1/Vista_SP_Prepwork.html

Go into Device Manager, expand DVD/CD ROM Devices and uninstall all devices. Re-boot. Windows will [attempt to] install the drivers upon reboot.

Regards. . .

jcgriff2

`

Read other 1 answers
RELEVANCY SCORE 86

Hello All,

can anyone help me to solve this error.

i m getting power calibration error when writing dvd with nero.

but i m still able to read cd/dvds.

i have formated and installed new vista but the problem remains,

thanks,
krunal

A:Power calibration error in my dvd writer.

Hi,
It could come from:
Old firmware
Bad support (very cheap dvd medias)
DVD writer dying

Could you attach the nero log so that we can check exactly what's going wrong.
Is your writer configured as slave?
What is the Nero version?
Anyway, the log will give us all necessary infos

Read other 7 answers
RELEVANCY SCORE 86

Hey guys,

My PC has been displaying this message during start-up... any suggestions?

SQL Writer

"SQL Dumper library failed initialzation. Your installation is either corrupt or has been tampered with. Please uninstall then re-run setup to correct this problem"
 

A:SQL Writer Error Message During Start-Up

do you have your xp cd?
 

Read other 3 answers
RELEVANCY SCORE 83.6

The DVD/CD writer is supposedly "Plug and Play". It will read both CDs and DVDs but there is no activity when I try to write. Using NERO I have done an auto-detect drive and it recognizes it. When I start to burn the cd NERO proceeds as if it is writing and even verifies that the burn was succesful. But the drive never even spins the disc?

The drive is a Pioneer DVR-A08xla

I am running windows 98se on an atholon 1700+ chip.

Does anyone know what I'm missing? Or if I should take this to the software forum?
 

A:Help please..I replaced a cd writer with a Pioneer DVD Writer

Check http://wwwbsc.pioneer.co.jp/product-e/ibs/device_e/dev00001r_e.html and make sure you have the correct firmware. Also for W98 some DVD writers require additional drivers.
 

Read other 3 answers
RELEVANCY SCORE 83.6

Computer details:

HP Pavillion 735n:

2600+ amd athlon xp processor (2.133ghz)
512mb ddr sdram memory
80gb Ultra DMA hard drive
64 mb DDR SDRAM NVIDiA gefirce4 mx graphics with 64mb a;;pcated video memory
HP DVD writer/ cd-writer combo 300n
Windows xp home edition

The HP DVD Writer/cd writer combo 300n will no longer recognize blank cd media

the drive

The drive will do the following:
Copy dvds (movies)
Write dvds (videos/media/files)
Read dvds
Read copied dvds
Read cds
Read copied cds

The Drive will not:
recognize blank cds
Write cds
Copy cds

Programs tried:
Record now
Windows Media player
Napsters built in roxio cd burning software

Methods tried:
Updated the drivers(from HP's official website)
Updated the flash ware(from HP's official website)
Tried 4 different brands of cds: Memorex, Dynex, Sony and HP
All cds were compatible with my writer.
Scanned the computer with uptodate spyware program(Adaware SE 1.05 professional)
Scanned the computer with up to date antivirus program (Symantec Antivirus Corperate Edition issued by my school) NO VIRUSES OR SPYWARE FOUND
Up to date fire wall Zone Alarm

Found the following in my registry and deleted it:
Root: HKEY_LOCAL_MACHINE
Key: Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Value:NoCDBurning

ALL PROGRAMS MENTIONED ARE UP TO DATE

I forgot to mention what it does when i put a blank in
When i try to copy a cd or write a cd from mp3s it does the following
when the cd is inserted a small cd icon come... Read more

A:HP DVD writer/ cd-writer combo issues

Looks like I have everyone as well as myself baffled on this one
 

Read other 3 answers
RELEVANCY SCORE 83.2

Hi I have a Sony External DVD Writer Model: DRX-710UL. I used Nero 6, Nero 7 & DVD Shrink softwares to burn movies into my Verbatim DVD+R disc. It was all good until some time back but offlate I am getting the Device Not Available error and the burn fails.

The burn process runs cool for few mins and after completing 2 or 3% it just fails.

Any help is greatly appreciated.

Thanks,
Venkat.
 

A:Device Not Available error with Sony External DVD Writer DRX-710UL & Nero 7

trydevice manager,click items by connection ,action scan for hardware changes possiblyreinstall the external drive?
 

Read other 1 answers
RELEVANCY SCORE 82.4

Hi guys,
I am back.
I have previously posted an issue with WL Mail 2011 (can not create, reply or forward message).
I am still struggling with it, and using WLE 2009 (Mail works smoothly with this version).
Now I got new information concerning the problem:
Before installing WLE 2011, I ran Windows Install Clean up, to clean all installers related to WLE 2011. All but Windows Live Writer are removed, and when I try to install WLE 2011, I get the message that it was not possible to install WL Mail (Messenger is OK).
Opening the message dialog box these are the details of the failed installation:

Problem Signature:
Problem Event Name: WLSetupError
AppName: WLInstaller
AppVer: 15.4.3538.0513
AppExitCode: 0x80040691
AppLanguage: pt
OS: 6.1.7601sp1.0x86-Wrk-1(1046;1046;pt-BR)Win7
ErrorType: 1
ErrorSource: PackageInstallTask
SuspectedError: 0x80070663
FailedApp: writer
Operating System version: 6.1.7601.2.1.0.768.3
Language ID: 1046

Do you have any idea how to solve this?
Otherwise I will keep WLE 2009, until Windo... Read more

A:Can not install W L Mail 2011 - Error code: 0x80070663 source: writer

Hello, you can try this MS tool to uninstall/install. Suggest a system image backup in case anything goes wrong, you can restore back to the working image.

http://www.sevenforums.com/software/...leshooter.html

A Guy

Read other 2 answers
RELEVANCY SCORE 80.8

I work in one academic institute and been used to using teams for a while....Mac version.
I've been invited to work collaboratively with colleagues from another institute that having just started using teams.
I've received various invites, logged initially and its asks permissions for that uni to be able to access my uni account info (fine) but when it gets as far as open up teams (either online or via the Mac app) I end up with the above error message above.
This is my first use of inter-institutional work using teams.
Any ideas please?
Thanks
Kevin

Read other answers
RELEVANCY SCORE 78.8

Running Windows 8.1 PRO RTM x64 upgraded from Win 8 PRO. Updates to 8.1 as of 17 October installed
Event viewer still shows newly triggered Error(s) CAPI2 event id 513.
I can trigger this error by manually creating a restore point invoking VSS.
The VSS System Writer is listed and is error free.
Log Name:      Application
Source:        Microsoft-Windows-CAPI2
Date:          17/10/2013 20:32:19
Event ID:      513
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Machine -Name
Description:
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
System Error:
Access is denied.
.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
    <EventID Qualifiers="0">513</EventID>
    <Version>0</Versio... Read more

A:Error source CAPI2 id 513 - Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object

Seems we finally have a solution thanks to user szz743 in
the other forum
Here goes:

"Microsoft Link-Layer Discovery Protocol" binary is \Windows\system32\DRIVERS\mslldp.sys
Its config registry key is HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MsLldp
 
During backup a VSS process running under NETWORK_SERVICE account calls cryptcatsvc!CSystemWriter::AddLegacyDriverFiles(), which enumerates all the drivers and tries opening each one of them. , The function fails on MSLLDP driver with "Access Denied"
error.
 
Turned out it fails because MSLLDP driver's security permissions do not allow NETWORK_SERVICE to access the driver.
 
The binary security descriptor for the driver is located here:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MsLldp\Security
 
It should be modified, I used SC.EXE and Sysinternals' ACCESSCHK.EXE to fix it.
 
The original security descriptor looked like below:
 
>accesschk.exe -c mslldp
mslldp
  RW NT AUTHORITY\SYSTEM
  RW BUILTIN\Administrators
  RW S-1-5-32-549       <- these are server operators
  R  NT SERVICE\NlaSvc
 
No service account is allowed to access MSLLDP driver
 
The security descriptor for the drivers that were processed successfully looked this way:
 
>accesschk.exe -c mup
mup
  RW NT AUTHORITY\SYSTEM
  RW BUILTIN\Administrators
  R  NT AUTH... Read more

Read other 21 answers
RELEVANCY SCORE 77.2

I need help!!!!
My dvd writer thinks its a CD writer and wont recognise blank DVDs. It has just decided to do this this a few months ago and its drivin me mental.
Is there anythin i can download 2 fix this.
My computers HP Pavillion 763.uk and im using Microsoft XP.
Can anyone help?
 

A:My DVD Writer thinks its a CD Writer

Read other 16 answers
RELEVANCY SCORE 77.2

I have a CD writer, CD-R media, DVD-R media, video files on my computer that are AVI files(from a DVD player) and I have Nero burning software. I have burned VHS video on my CD writer. What prevents a CD writer from being able to burn a DVD if the media is DVD and the file is the proper format (AVI)?
 

A:what are differences between CD writer and DVD writer

Well you're in luck if you have an APEX DVD Player in your home. APEX DVD-Player's can play AVI and MPG files on regular CD's, but you will not be able to use a CD-Burner to burn to a DVD. Why? No one knows..lol Maybe someday, someone will find a loop-hole, I doubt it lol, but hey, you never know.
 

Read other 2 answers
RELEVANCY SCORE 77.2

I have a normal dvd drive and a Dvd re-writer underneath it.
I recently formatted my pc, and i downloaded a programme for a freind, and evertime i put a dvd into it, it says Erase CD, i do it to see what happens..and it continues saying it.
I try draging and dropping and it says "Windows encontered a problem while trying to copy this"
Another weird thing i realised, in explorer it says "dvd rom" when i put a dvd in it, it turns to CD rom.
When i put a actual CD 700meg in, it lets me copy fine!
Ive tryed uninstalling and taking out and putting the ribbon back in and nothing solves it.
The file im trying to copy is 1.2 gig, and it wont pick up DvD's please help, is a
LG, Dual writer, supermulti DvD rw

Thanks in advance

Kyzou
 

A:Dvd re-writer not being picked up as a dvd re-writer

After reformatting the PC, you did load all the motherboard drivers again?

Otherwise you may have some issues with the default Windows drivers that would be substituted.
 

Read other 2 answers
RELEVANCY SCORE 77.2

Hi,

I tried to burn an audio cd the other night using neo, i got an error whilst it was trying to burn, i cant remember wha the error was but i tried to burn another cd, this time the completed bit went upto 6% then decided not to do anything, i left it for a while and i ended up having to ctrl,alt+ del the task, then it just jung up, and it wudnt eject the cd when i pressed the button, so i had to end up restarting the computer. It has now done this about 3/4 times.

Ive just tried to copy a game to see if it would allow me to do that, but i get an error saying, Unrecoverable Read Error, then the name of my dvd reader, then error reading data.

Does anyone have any suggestions or shud i be looking at taking the computer back.

Thanks in advance.
 

A:CD Re-Writer / Dvd Writer Problem

I burnt a data cd before and that burnt with no problems at all, i then tried to burn an audio cd after this, but yet again it failed.
 

Read other 3 answers
RELEVANCY SCORE 76.8

I have been trying to backup files and keep getting writer experienced a transient error. I am not sure what to do can some one help me please

A:Transient error

Hello shella4424,
Welcome to vista forums!

Can you copy these files at all? Can u move them to a thumb drive? Are u the administrator?

Read other 1 answers
RELEVANCY SCORE 66.8

Faulting application name: taskeng.exe, version: 6.1.7601.17514, time stamp: 0x4ce79d2c
Faulting module name: svrltmgr.dll, version: 0.0.0.0, time stamp: 0x584f2bca
Exception code: 0xc0000005
Fault offset: 0x000000000021f7d3
Faulting process id: 0x1860
Faulting application start time: 0x01d29e6dedebd9b9
Faulting application path: C:\Windows\system32\taskeng.exe
Faulting module path: C:\Windows\winipbin\svrltmgr.dll
Report Id: e0417759-0a61-11e7-9c07-0050569f7630

Task Scheduler crashes and the program closes. Need help

Read other answers
RELEVANCY SCORE 64.4

I have problem with Outlook Express. When I try to send a message the following message appears: I can receive emails. This has only been happening in the last couple of months as I have been using outlook for a few years now.
The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was '[name removed by mod]@googlemail.com'. Subject 'jkljl', Account: 'mail.eircom.net', Server: 'mail.eircom.net', Protocol: SMTP, Server Response: '451 http://www.spamhaus.org/query/bl?ip=109.78.93.210', Port: 25, Secure(SSL): No, Server Error: 451, Error Number: 0x800CCC79

Would be grateful for any help
 

A:Server Error 451 Rejected email

I removed the name from the email address to protect his/her privacy--and maybe cut down on spam.

Have you turned on SMTP Authentication, as advised here?
 

Read other 1 answers
RELEVANCY SCORE 64.4

I used to be able to send e-mails to A.O.L. but lately I've been getting the below undeliverable mail rejection. I am on WOW, is it something with my I.S.P. or is it with A.O.L.? Please let me know how to handle this so I can continue to send e-mail to A.O.L. Thanks, see below for the error message.

AOL is blocking my email, saying error 554 RLY:B1
I used to be able to email my friends on AOL, but now AOL is blocking my emails and quoting error 554 RLY:B1
I used to be able to email my friends on AOL, but now AOL is blocking my emails and quoting error 554 RLY:B1. My server is WOW

AOL has a help file that says error 554 RLY B1 is an automated block "placed on an IP address when AOL member complaints go over our set threshold. These are automated blocks that are removed by the system within 24 hours if the complaints are below the threshold."

There is nothing you can do about this, except nag whoever runs your mail server to stop users from sending spam or bulk emails that might be identified as spam.

You could, of course, set up a free email address to communicate with your friends on AOL. In fact, you could sign up for a free AOL mailbox with 2GB of storage at mail.aol.com, and see if AOL blocks itself.
 

A:AOL. error, can't send e-mail to AOL being rejected

AOL is setup to automatically blocks a users IP address that is receiving too many complaints. This block will automatically be removed by the system within 24 hours after the complaints drop off.
 

Read other 3 answers
RELEVANCY SCORE 64.4

I used to be able to send e-mails to A.O.L. but lately I've been getting the below undeliverable mail rejection. I am on WOW, is it something with my I.S.P. or is it with A.O.L.? Please let me know how to handle this so I can continue to send e-mail to A.O.L. Thanks, see below for the error message.

AOL is blocking my email, saying error 554 RLY:B1
I used to be able to email my friends on AOL, but now AOL is blocking my emails and quoting error 554 RLY:B1

Jack Schofield

Thu 9 Aug ?07 18.59 EDT First published on Thu 9 Aug ?07 18.59 EDT






Shares
0

Comments
1
I used to be able to email my friends on AOL, but now AOL is blocking my emails and quoting error 554 RLY:B1. My server is WOW

AOL has a help file that says error 554 RLY B1 is an automated block "placed on an IP address when AOL member complaints go over our set threshold. These are automated blocks that are removed by the system within 24 hours if the complaints are below the threshold."

There is nothing you can do about this, except nag whoever runs your mail server to stop users from sending spam or bulk emails that might be identified as spam.

You could, of course, set up a free email address to communicate with your friends on AOL. In fact, you could sign up for a free AOL mailbox with 2GB of storage at mail.aol.com, and see if AOL blocks itself.
 

Read other answers
RELEVANCY SCORE 64.4

I keep getting the 550 #5.1.0 Address rejected Error in Outlook message in outlook on my laptop whenever I send a message to an external email address. I have 2 emails in outlook setup and can send in between them. My firewall is set up correctly to allow the pop3 and also outlook I beleive. Can anyone help? I have searched so many blogs and posts and nothing seems to work.

Thanks!
Hannah
 

Read other answers
RELEVANCY SCORE 63.6

I hope someone can help with this. I setup a pop3 email account on outlook 2003. When I try to send and email I get the following error. It says the message is undeliverable. Here is the actual error email that appears with generic names

"the message could not be send because one of the recipients was rejected by the server. Server Response: '504 <computername>: Helo command rejected: need fully qualified hostname'. (account: 'my account name", SMTP server: 'mail.mydomain.com'. Error Number ox800ccc79).

Could someone please help with this?
 

A:SMTP Helo Command Rejected Error

Have you called your ISP yet? I had an account that I was trying to configure and my pop3 was different from my smtp and it took my ISP to help me out and no one else would have known that. Liz
 

Read other 3 answers
RELEVANCY SCORE 63.6

Hi

Recieving the error Outlook Experienced Serious Error last time the Addin Outex.dll was opened.

This is Outlook 2003, when turning on Out of Office it is ok - when trying to turn Out off Office OFF this appears

We have tried to tunr on the Addin in Outlook fixes temporarily also tried turning off Cached mode

Has anybody seen this before?
Thanks
 

A:Solved: Outex.dll - experienced serious error

Two links, both point to the same registry fix needed.
http://office-outlook.com/outlook-forum/index.php/m/112147/
and
http://support.microsoft.com/default.aspx?scid=kb;EN-US;823472
 

Read other 3 answers
RELEVANCY SCORE 63.6

While I was viewing video footage in Media Player Classic, Windows 7 Pro x64 went BSOD. Then windows would not boot and said in the error that the OS was installed on drive D, while I know that it is installed on C. I tried to boot nine times and ran the Startup Repair each time with no avail. Will I need to reinstall Windows or is their a way to fix this?

Let me know if you need more info.

Thanks!

A:Windows experienced an error and now will not boot.

  
Quote: Originally Posted by Hunt


While I was viewing video footage in Media Player Classic, Windows 7 Pro x64 went BSOD. Then windows would not boot and said in the error that the OS was installed on drive D, while I know that it is installed on C. I tried to boot nine times and ran the Startup Repair each time with no avail. Will I need to reinstall Windows or is their a way to fix this?

Let me know if you need more info.

Thanks!


Try doing a System Restore on a date before you had the problem. Let us know what happens.
Thanks,

Read other 9 answers