Over 1 million tech questions and answers.

Tablet Settings/ Tablet Calibration Missing on control panel?? win10

Q: Tablet Settings/ Tablet Calibration Missing on control panel?? win10

I have a Tablet drawing monitor, and today the pen stopped working, I fiddled with it for a while, I tried uninstalling the drivers for the Hardware and reinstalling, but then I noticed that the Tablet Settings and Calibration Options you normally see in Control Panel are mysteriously gone. After maybe 2 hrs of googling I've given up,. there's very little on google, and now im considering doing a "Rest This PC." Any help would be appreciated.

Read other answers
Preferred Solution: Tablet Settings/ Tablet Calibration Missing on control panel?? win10

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)


Tablet PC Settings not showing in Control Panel Although Tablet PC Components enabled in Programs & Features.
I have tried System Restore, re-enabling Tablet Components...

Read other answers


I installed (and reinstalled couple of times) Windows Home Premium to my tablet (HP TX1000) and can't find the Tablet PC Settings under Control Panel.

I also tried Windows Update and hoped that it gets to install this setting but after the last update, i still can't find the settings.

Also, I found a forum where they suggested that I look for a setting where I can enable (unhide) the Tablet PC Settings. I don't remember the website but they provided screenshots on how to get there, and so i did get there but the checkbox for Tablet PC Settings is missing in my configuration. So I guess that the settings were not installed on my tablet.

I already checked the different versions of Vista and verified that Vista Home Premium includes Tablet PC Settings, and I'm sure that it does not have any sub types (like Vista Home Premium with Tablet PC, or Vista Home Premium without tablet PC) or am I wrong?

oh I did not get any error and such during the installation of vista home premium (retail), and under device manager, there are no yellow/red icons on the devices aside from the webcam cause i haven't found the driver for it yet.

can you guys help me out?

Read other answers

 Lenovo ThinkPad X1 Tablet Gen 3 : cannot be used as a tabletObsolete BIOS/ECP with Missing Support for ?no win button? logon(support Power + Volume up button combination to notify "CTRL+ALT+DEL") SITUATIONLenovo ThinkPad X1 Tablet Gen 3 (model 20KK) with Windows 10Company forces the safety policy to No Win Button logon (right decision)The hardware ?Power + Volume up? to replace the CTRL-ALT-DEL is not working on Lenovo ThinkPad X1 tablet gen 3 ISSUE:I cannot use a screen logon to Windows 10 (inhibited by safety policy).I can only logon when the keyboard is connected (to use hard CTRL-ALT-DEL)> The Lenovo ThinkPad Tablet X1 Gen 3 can only be used as a normal laptop? DETAILSSystem Win 10 64b (10.0.16299)Model 20KKS1111JBIOS UEFI 26 (Lenovo N1ZET70W (9/18/2018)ECP 06Note:CTRL+ALT+DEL is implemented by the embedded controller firmware (ECFW, also referred to as ECP)The issue was known and solved by Lenovo for ECP>1.06 on other tablets.(see BIOS1.16//ECP1.08 was solving the issues and also BIOS1.54/ECP1.11)(https://forums.lenovo.com/t5/Enterprise-Client-Management/Unlock-X1-Tablet-without-Keyboard/td-p/335...) QUESTIONSWhy is Lenovo selling tablet with obsolete ECP1.06 on fresh new Lenovo X1 Gen 3 tablet, even in the latest BIOS ?When do you think we have the right ECP update on Lenovo ThinkPad X1 tablet gen 3 ?Any suggestion how to solve/bypass this ? I realize it was stupid to purchase and pay for a tablet and use it as a basic lapt... Read more

Read other answers

I have a fujitsu Stylistic -with SP2 I tried to install SP3 but the installation failed. When Introduced SP2 the onscreen keyboard did not work. at login, I have a blank body with no keys. After logging is the T IP has the writing and character pads, but the keyboard is blank. My workaround is to one the onscreen keyboard available into accessory folder.

Any suggestions?

Read other answers

Hi, Yesterday I bought a used X220 Tablet - the version with Gorilla Glass - and installed Windows 10 Pro (64 bit) on it.What a great little computer this is! But what disappointed me was the lack of precision of the pen that came with the tablet. Unfortunately I could not find a setting - or program - to calibrate the pen. On this forum I learned that a lot of owners have to deal with a pen that is not accurate. On one of the posts I read it was mentioned that the digitizer in the X220 Tablet is made by Wacom, so I went their website for a recent drivers. Luckily, I soon found an appropriate tool, the Wacom Hardware Check, on ftp://ftp.wacom-europe.com/pub/WINDOWS/WacomHardwareCheck.exe . After downloading and running it, I was told:"You have hardware that is compatible with the Wacom FEEL driver. You can download the latest driver here: http://www.wacom.com/feeldriver " The URL led to a file on http://cdn.wacom.com/u/drivers/TabletPC/ISD_DualTouch_732-12.exeThe file is about 24 Mb in size. After downloading and installing it, I was able to calibrate the screen, with 25(!) calibration points. Accuracy is great now; not only in landscape, but also in portrait mode! Since I found no reference on this forum to the Wacom FEEL driver in combination with the X220 Tablet running on Windows 10, I thought it might be interesting to others in this forum. Cheers! 

Read other answers

I use my Yoga 720 15" for photo editing.  I use Adobe Lightroom Classic CC and Adobe Photoshop CC.  The main issues are in Lightroom.  I also have odd USB issues where the color calibration changes.  I'll explain both.  1)  Lightroom  -  Several issues all only occur with Wacom Tablet and only occur after using the program for about 5 -10 minutes. If I switch to a different program (example: File Explorer), tap or make contact with that program and then return to Lightroom I am able to use Lightrom normally for about 5 - 10 minutes before it begins to get buggy again. Pen stops functioning on initial strokes.  I must double tap the pen to the tablet and upon contacting the tablet on the second tap I can then create a brush stroke. The verticle scroll bar moves in the opposite direction of the pen path.  So if I use the pen to move a slider down the slider will instead move up as my pen moves down.  If I attempt to slide the scroll slider down from the very top it attempts to move the screen up. In general the sliders in lightroom have a good bit of lag.  I'm kind of used to this since Lightroom has always been laggy on my machines when using a Wacom tablet.2) USB Devices cause Display Color Calibration to Change.    I use a Spyder 5 Elite to calibrate my screen.  I've never experienced this on any other machine and all use the same program/hardware.  On this Yoga 720 if I were ... Read more

Read other answers

Hi,i could not change the view of the control panel..screenshot will explain more..

A:Control panel settings missing

Read other 6 answers

Well, first off I would like to say this is not a bluetooth pairing problem, just thought I would clear that up haha

Anyways here is the problem:
I have my Bluetooth adapter connected to my PC via USB.
It is seen in "Devices and Printers" as a Bluetooth device.
But when I right click to access the bluetooth settings its not in the menu.
And the Bluetooth settings is not in the control panel,
My device does not show up in device manager,
And to top it all off the Bluetooth service is running which should allow me to access such features.

I have gone through several Google pages and searches looking for a solution but found nothing.
Everyone simply suggests to do a system restore back to the time when the Bluetooth worked,
Unfortunately I have not used my Bluetooth in months so I do not know when this change occurred.

So if anyone could help it would be much appreciated. Thank you

A:Bluethooth Settings Missing In Control Panel

Solved the problem myself after many trials and errors

Read other 2 answers

Hi there, I hope anyone could help! Last day my PC got a popup that says a "Potential Spyware Operation! Your computer is making unauthorized copies of your........"

I have read some thread and followed instructions on how to remove it. My problem now is about the Control Panel and Windows Security is still unavailable however the popup is not anymore bothering me. Here I include my HJT log....Maybe I could fix check it but I don't want to do it myself without expert's advice because of fear of a system failure. Thanks in advance to anyone who could help me....Mabuhay!
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:54:40 AM, on 10/12/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\Program Files\Ahead\InCD\InCDsrv.exe
C:\Program Files\Ahead\InCD\InCD.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\avgas.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\P... Read more

A:Solved: Control Panel & Security Settings Missing

To all concerned,
By reading the Malware Removal & HijackThis Logs forum, I have tried instructions by
MFnNdc. It's great because my PC now is absolutely free from the mess I had a for couple of days....

Thanks "MFDnNc"

Here's my new HJT log -
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:04:39 PM, on 10/13/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\Program Files\Ahead\InCD\InCDsrv.exe
C:\Program Files\Ahead\InCD\InCD.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\avgas.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\Program Files\IVT Corporation\BlueSoleil\BTNtService.exe
E:\... Read more

Read other 2 answers

I am trying to get email from my Cloud server but can not find any way of doing it in the mail app.

Urgent advice needed


A:Email in Win10 Tablet

have a look here and hope it helps

Windows 10's Built-In Mail App: Everything You Need to Know | PCMag.com

Read other 1 answers

Just got this, and did a clean install of Windows 10 Pro. Installed all drivers, nothing funky in Device Manager, but the touchscreen and the pen are not working. Click on Pen Tablet Properties in Control panel and it tells me Supported Tablet Not Found on the System. This is my first time dealing with one of these, and am lost.  Lenovo Thinkpad X220 TabletIntel i7-2640M(2.8GHz)8GB RAM, 250GB Solid State Drive12.5in 1366x768 Multitouch LCDIntel HD GraphicsIntel 802.11agnBluetooth1Gb EthernetUltraNav, Secure Chip,Fingerprint reader, Camera

Read other answers

w I design restaurant point of sale (POS) system. This project involves using 8 inch win 10 tablets so the server can take orders right at the customers' tables.
I have a win 7 desktop (win 7) computer as the main computer (station1).
I have a win 10 8 inch tablet ON WIFI to be used by the server (station2).
If a server uses the main computer (station1) our software program sends the customer order to be printer on a kitchen printer which is a receipt printer printing on 3 inch wide paper as used in restaurant to print kitchen orders and customer checks.

I am trying to connect the receipt printer on the desktop onto the tablet.
When I go to "add a printer" on the tablet, regular printers like Lexmark and HP appear in the list of available printers on the tablet.
However, the receipt printer does not. Bixolon, the maker of the receipt printer, does not know why but suggests that the receipt printer has a different IP address then the desktop (station1). I am just exploring this possibility but know little about ip address.
I wonder f this is true?
How come my Lexmark and HP printers appear but the receipt printer does not?
PS: I just found out HP does not have a ip address.
If this post sounds garbled it is bacause I have not idea what I am talking about.
Any suggestions would be greatly appreciated.
[email protected]

Read other answers

Totally new to Win10 (and still prefer Win7).

Recently purchased an Acer Win10 Tablet and wanted to connect to my existing network of two Win7 Desktops and two Win Vista Laptops.

I just CANNOT get the Tablet to corporate! Sometimes it shows up on the network "map" and sometimes it doesn't. Then sometimes when it does, I get the error saying that "this computer cannot be assigned to the network", or something similar. Sometimes when I click on the Tablet I can see its files, but most of the time I/we get the error that we don't have the ability to connect to it.

I just accessed the network on this computer (Win7 Desktop) and was able to view the files, even though it was showing the above message. As a matter of fact, I don't even know how to access the "map" on the tablet.

Whatever else you might need to help, please let me know.

Thanks a lot.


A:Win10 Tablet Networking Problem

Network Map - View Networked Devices - Windows 7 Help Forums

Read other 0 answers

Hi All, Recently I have been receiving this error message "Tablet Version Mismatch - Please reinstall the tablet software" when I tried to open some of my apps in the LAPTOP mode.I tried to reinstall the Wacom driver (although I do not know what this is for), but it did not work.Any advice would be appreciated!

Read other answers

The latest bios update of X1 Tablet (Model:20GG) breaks the sleep (or hibernation) function. I found the tablet sometimes cannot be waken up by pressing the power button after entering connected standby. The version of the flawed BIOS is1.68-1.21 (N1LUJ30W) After rolling the embedded controller version back to 1.20 (N1LUJ29W), the problem no longer exists.

Read other answers

After a fatal error in my windows, I had to reinitialize my windows 10. After I did so by the windows original tools, the windows became completely stable, but all tablet features are lost. Even thinkvantage cannot recognize many features and hardwares do not work. What should I do?

Read other answers

Hello everybody

My first post here, hope I'm doing it right.

I'm trying to get a Windows 7 Standard Embedded to work as "it should"

The issue can be seen on the attached photo in this post.

No matter what CAB I install after the image has been build the screen I get under "Control Panel" - "User Accounts" - "User Accounts" is the one I have attached.

I can't find the right feature or pack that I need to install or activate to make me be able to get the normal setting screen in "User Accounts".

Is there any of you people who can tell me what am doing wrong?

Best regards

A:User Control Panel missing settings and icons - Windows 7 Embedded

Test for infection, run SFC, establish a Clean Boot, then continue through the other Troubleshooting Steps for Windows 7 reporting back as you go in case other steps are indicated.

Read other 3 answers

I have just bought an Elite x2 1010 G1 Tablet and have followed the screen instructions to install and create a user name and logon password to WIN10.  I created a Local user because I have no idea what to do with the "Hello" logon creation - I decided to carry this out later once I was firmly logged on to WIN10.   Everything seemed to work correctly within WIN10, so I downloaded my computer security software from CHECKPOINT,  created my email accounts, that also worked correctly. When I rebooted in order to carryon installing my programmes, I could no longer log on to WIN10 it refused my password. Not having created a  password reset key- simply because I did not know you had to do so at this point, I had no other choice but to reinitialise and reinstall the whole system again - after having spent lots of time trying to find the relevant documentation on how to do this.  Let me specify - I live in France;  the WIN operating system including the instructions is in French although I requested the apps to be in English (as it is my mother tongue). I spent 31/2 hours reinstalling the system and once again I requested the Local User + password - which was accepted by Windows 10.  So as not to waste time, I rebooted to see whether I could logon on again .... and NO, Windows refused yet again to accept my logon, which means that I am going to have to, once again, reinstall the complete  WIN10 operating system!!!  ... Read more

Read other answers

Tried the System Backup/Restore procedure. Successfully created System Image on specially purchased micro-usb thumbdrive. On attempting Restore...got as far as initiating the 'Special Bootup' proc. However...at this point the restore procedure REQUIRES user input while at the same time refusing to recognize input from BT keyboard or touchscreen. Catch 22...can't get there from here situation. Had to use hard reset to escape.

Is this a universal problem for Windows tablets? If so, its a downvote for Win10 as a 'ready for prime time' tablet OS.

Workaround - would be for me to acquire a usb hub and microusb adapter cable so I can attach kbd/mouse/storage simultaneously. Then we'll get far enough into the procedure to determine if it will allow me to point it at the correct restore file location.

Read other answers

I have upgraded my X201 Tablet to Windows 10 32bit. As far as I can tell, everything is working, including the WACOM drivers and touchscreen.  Wireless has worked perfectly so far, not sure about Bluetooth as I don't use it. My only issue is that the buttons on the display do not work. The power button located on the display does work. I tried installing the Tablet Button Driver II and it will go through the install but the buttons do not work.  This is the download link:http://support.lenovo.com/us/en/downloads/ds027627 The document claims Windows 10 compatability and was Last Updated :08 Jun 2015. On inspection, all the files extracted are dated from 2012 and when trying to manually run the software Windows throws up an error that the software is not supported on this PC.   I removed and reinstalled and noted that the driver information page when running the installer does NOT have Windows 10 listed as a supported system. My assumption is that the driver that they have linked on the download page is NOT the most current driver and is infact the driver for Windows 7 from 2012. Does anyone know how to contact Lenovo to get the correct driver posted to the page, or know of an alternate source to try and find it?

A:X201 Tablet Windows 10 Tablet buttons not working

hi, I can't help you with your question, sorry! Gooed to hear everything else is working fine on your system. Can you tell me what to do to get the x201 tablet's touchscreen to work!? I will have a clean windows 10 install. Where do i get the (right) drivers (windows, Wacom?) Thanx!Carlo

Read other 1 answers

Does anyone know if there is a program available (free if possible) similar to Quicken (Deluxe) that I could use on my Android Tablet(HP 10 Tablet G2 -2301)? That would keep track of bank accounts and interest earned, and keep track of one stock IRA and interest earned and yearly RMD? And produce reports for that interest earned, etc.? Mainly for using when preparing yearly tax forms.

A:Quicken alternative for Android Tablet(HP 10 Tablet G2 -2301

Have you looked at Mint.com?

Read other 2 answers

plz help
i have lenovo thinkpad 2 tablet it was not running well so i decided to reset it ...
and it keeps on repeating the same thing...
please help me ....


If it is still under warranty, call Lenovo. IF you tried to reset to factory defaults, and it is still failing, then you have something else that is going bad. My suspicion would be memory as that is what happened to me although it was on a desktop. Something to check...good luck.

Read other 1 answers

How do I trun this off please, it keeps popping up on my screen and is docked on the left hand side just lurking and waiting to appear! A damned nuisance but I can't find a way of closing it down...
Help please!



A:Tablet PC Input Panel

Open windows features, and uncheck "Tablet PC Components" :

Regards....Mike Connor

Read other 5 answers

Is there any installer for "Tablet PC Input Panel" for W7 home basic? Where can i get it? Thx for your time.

A:Tablet PC Input Panel

If you do not have a Tablet PC - then it is not recommended to do so.

Read this: Tablet PC Input Panel (Windows)

Read other 3 answers

I downloaded the 'driver' on the gateway website:

after downloading & Extracting the file. a 'read-me' file pops up.

it reads:


This document describes the steps necessary to install the Tablet PC button drivers for the notebook computer models listed in the Applicable Part Numbers section below.

1. From the Start menu, right-click Computer, and then click Manage.

2. In the User Account Control dialog box, click Continue.

3. In the left pane, click Device Manager.

4. In Device Manager, click the plus sign (+) next to Human Interface Devices.

5. Click Tablet PC Buttons, and then from the Action menu, click Update Driver Software.

6. The Hardware Update Wizard displays. Click Browse my computer for driver software.

7. In the Update Driver Software dialog box, type or browse to the C:\Cabs\D20113-002-001 folder. Click Next.

8. Open the D20113-002-001 folder and confirm the selection of the qttabbtn.inf file. Click Open.

9. Follow all onscreen instructions to complete the installation.

I get stuck at step number 5.. I do not have a 'Tablet PC buttons'!! (this is the reason why I need to download it..).. it seems to me this 'driver download' is actually an update for the driver. and not the driver its self.?

I downloaded other drivers from them, for my computer and they all worked great.. they all had easy 'install... Read more

A:Gateway Tablet PC, I need the 'Tablet Buttons driver'


After opening the qttabbtn.inf file (installation script), I found these alternative names for "Tablet PC Buttons." Try finding one of these names in the Device Manager:
"Quanta Computer Inc."

"Quanta Computer Tablet PC Buttons HID Driver"

Read other 10 answers


i have just bought a tablet for my x64 vista laptop. Since vista by default support tablet, thus i was hoping to make full use of it. But after installing the driver for my tablet and using it without problem, i tried to launch the tablet input panel in vista but nothing happened. it just won't launch. I am lost and not knowing what to do next to enable this function in vista. Can anyone help me? Thanks


A:Tablet Input Panel not working

I just found the work around. By enabling it at the taskbar, will call the input out.

Read other 1 answers

I have a bamboo fun tablet pc input device. So Fun so usefull Great tool. When I installed vista I didnt have it so i didnt enable the features. When I got It i enabled them via controll panel programs and features. The sticky Notes and Journal work but The tablet pc input panel is not working correctly.
I enable the toolbar but i dont auite know how it works? When I first bought my pc vista was already installed so these features where all enabled. The input panel would show at the left of the screen. Not the whole thing just a little of the window and when you clicked it it would slide out and you could write there. Now when i enable the toolbar nothing shows anywhere. I can click the toolbar a million times and nothing will show.
some thing that may be causing this is Object Desktop? I have Object Desktop and windows blinds running. although when I unload windows blinds restart my pc and have windows default theme applied still nothing. Destop X is part of object desktop and I have gadgets opened. Even if Close the gadgets nothing? I dont think that it had to do with object desktop but I just though that i would include this info for better feedback
I can use windows journal to do the same thing but I would rather use the input panel. and even if I dont use It I want it to be working because i like everything that I pay for to work? Ya know. LOL Anyways I have no clue what to do and I would greatly appreciate help with this. thanks so much

Robby K... Read more

A:Tablet Pc Input panel Not Showing at all!

You know this is what always happens to me. I search and search and search for the solution to a problem on the internet and everywhere else. When I cant find it i post it here. then when I post it here I go to search for the solution again and find it right away! AHHHH! It is so upseting! So here is a link to the solution very easy!


Read other 1 answers

When I try to write anything in the the Tablet PC Input Panel thing, it just doesn't seem to realize I'm trying to write in it. I have a Wacom Graphire4 tablet that I tried to write in it with, but nothing at all shows up. I thought it was a problem with my tablet, but it doesn't show up when I try to use the normal mouse on my laptop either.

The thing is, I would have thought this was just a problem with the Tablet PC Input Panel, except I think it might be something more because even when I try to draw in the handwriting tab in MSN Messenger, nothing shows up there either.

Both of these things used to work, I'm not really sure what happened. It's frustrating and I have no idea how to fix it.

Any help anyone could give would be very much appreciated!

A:Tablet PC Input Panel problems

Hi -

Oct 2010 updated Vista drivers for Graphire 4 tablet available -


Update mousepad drivers as well. Check system manufacturer's website.

Regards. . .



Read other 2 answers


I was curious how do I remove the table PC input panel? If my mouse goes by the bar, it jumps in front of my screen. I hate it.

Read other answers

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Enterprise, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz, x64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 2986 Mb
Graphics Card: Intel(R) HD Graphics Family, 1301 Mb
Hard Drives: C: Total - 476837 MB, Free - 444700 MB;
Motherboard: MSI, H61M-P23 (MS-7680)
Antivirus: Microsoft Security Essentials, Updated and Enabled

How do I move "tablet PC input panel" from the center of the taskbar to the right side of the taskbar?

Read other answers

A couple days ago the Tablet PC Input Panel became unmovable. I can't slide it up and down the left edge when it's minimized and also, once it is expanded, it can't be moved around the screen. Can anyone help with this?

edit: just discovered that it's a problem with my Wacom Bamboo graphics tablet driver, because I can move the panel using the touchpad of the laptop. So, I will try uninstalling and reinstalling the Wacom driver. I won't need any advice now, thanks.

A:Tablet PC Input Panel has become unmovable

Me too, noticed it a few days ago. Has some MS update hit us? can move the panel using a plugged-in keyboard-center stick and with a USB mouse. The Windows Touch Pointer, however, will move any other window but not the Touch Keyboard or Touch Input Panel. When I touch the top bar of the TK or TIP, the pointer seems different and does not "pick up" the TK or TIP. Right-click does nothing. But elsewhere on every other window I try, it works fine.

Have you fixed it, shokan2, and if so, explaining exactly how would be greatly appreciated! I have not discovered anything on Microsoft Support yet. Thanks for sharing 8-)

ps Acer Iconia Tab W501 and I accept all automatic MS updates.

Read other 6 answers

This is a minor problem but irritating nonetheless. My tablet PC Input panel seems to have lost its formatting - so instead of looking like the standard TIP, it looks like a very basic version without colour and with very basic graphics. The keys are smaller too making it harder to select the correct key in keyboard mode. I don't recall when it happened exactly as I don't always use the input panel. It may have been after I installed Avira, but maybe not. I'd be very grateful for any advice on how to fix this.

System Model: PORTEGE M750
BIOS Version: TOSHIBA Version 1.30

Operating System
Microsoft Windows XP Professional
Version: 5.1.2600
Service Pack: 3.0

Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz
Version: x86 Family 6 Model 15 Stepping 13
Speed: 1995 MHz

A:Problem with Tablet PC Input Panel

Sounds like the Theme got changed.

Read other 4 answers

I am currently having a problem with my Tablet PC input panel, I am running vista business on 32-bit on a HP compaq 2510 laptop, now when I am using the input panel I cant access any of the drop menus ( tools, help and language ) when I try to click on one of the menus it opens for like a split secon then closes.

I have tried searching for solutions but alas have not found any. I couldn't even find a way to reinstall the software.

Any solution would be apreciated as I would hate to restore the system to factory settings.

A:Tablet PC Input Panel problem

I had the exact same problem, solved it by pressing shift + alt to change keyboard language (using my actual keyboard, not the on-screen one). Can't really explain why that worked though. You might not still have the problem, in that case maybe there's someone else out there with the same problem who can try this.

Read other 2 answers

My Tablet PC Input Panel is gone and I can not open one any where.

How do I get the Input Panel back?

I have the Input Panel Icon on my task bar but it does not open anything.

A:Tablet PC Input Panel Problem

What happens if you type input panel in search. Does it pop up so you can click on it?

Read other 7 answers

 After installing XPSP3 on my Gateway E-155C tablet I lost the contents of the on screen keyboard.  When the system first starts or the laptop is locked, the displayed keyboard has an outline but there are no keys shown.  Likewise, when I call up the Input Panel and go to the keyboard entry mode, there are no keys displayed.  Is this a driver problem and, if so, which one and where can I get an updated version to fix this problem.

A:Tablet Input Panel Blank for Keyboard

Evening Walt
 a few things to check.
Btw you did not post your systems specifications.
Which video card is listed in your device manager? *click on start, control panel, system, then device manager*
What version of your video card driver is listed?
During your post install of Sp3 did your system have any devices with an yellow exclimation mark next to it?
Panisonic, What speeds, memory, which recognition pack, any other software that might interfere with the install of Sp3 Anti-virus, anti-malware. Zone alaram, Anti-malware products prevent instllation of Sp3.
What errors were present in your event viewer?
c:\%windir%\svcpack.log file?
%windir\system32\Windowsupdate. log file?
Have to ask this isnt a x64 version of Tablet pc is it? have to ask.
Did your tablet pc have the latest bios available from your system manufactorer?
1 a) What are the settings in the regional and language panels?
b) Also please check the following settingsin the advance text services
   Tablet PC Correction    Tablet PC Correction for Windows Journal    Tablet PC Text Insertion.
c) Next open up a command window by clicking on start, run, enter the letters "cmd" then enter.
navigate to the following folder
 cd c:\program files\common files\microsoft shared\ink
regsvr32 inkobj.dll
It should put up a succeded text box click on ok.
d) Start the services.msc from start, run.
Since I am not as familiar with the tablet edition.
Start with... Read more

Read other 11 answers

If you're a tablet user, the best thing about 7 is the vastly improved handwriting recognition. One thing through, if there's no ink in the TIP, it goes transparent whenever the stylus isn't hovering over it. This happens even if window transparency is disabled. I guess that's so it don't hide things when you're not using it. But I find this very distracting. Any way to turn this off?

A:Tablet Input Panel--HATE Transparency

Hello Isaac,

Welcome to Seven Forums.

On the input pad, click on tools/options. Check mark Show the tab even when pen out of range.

Hope that's what your looking for.


Read other 3 answers

Hi Guys

Does anyone know how to launch the calibration screen (landscape) from the run line?

rather than going through control panel | Tablet and Pen settings

Read other answers


I am experiencing a small problem with my Windows Vista 64 computer. After I leave my PC idle for a new minutes and come back, I get the message, "Tablet PC Input Panel Accessory has stopped working." I then choose, "Check online for a solution and close the program." Then if I go to my Tablet PC Accessory, it appears to be working anyway. I thought upgrading to Service Pack 2 would fix this problem, but it has not. Has anyone else gone though this problem? Is there a fix out there? Attached is a jpeg of my error message.


Michael R

Read other answers

I may be missing something obvious here, but I can't seem to find the setting that allows me to configure the sensitivity for my graphics tablet. I've searched all through the Pen options in the Control Panel, but I can't find anything. I've searched through all the related menus, too, but still nothing. Would someone be so kind as to enlighten me?

A:Graphics tablet/pen settings.

Hey Adam1111,

Did you already check here: Open Tablet PC Settings by tapping the Start button > then tapping Control Panel. In the search box, type Tablet PC Settings, and then, in the list of results, tap Tablet PC Settings.

Can you provide more information about your computer specs?


Read other 2 answers

Got a tablet PC, but we lost the original system disc that came with it. Can I simply put WinXP Pro on it or do I have to put Tablet Edition on it?

A:Tablet Edition required for Tablet

Read other 6 answers

This is probably a little off the beaten path on this forum but figure at least its a place to start. I was given a new ATT Trek II HD tablet and was wondering if there was a way I could use it to control my WMP 12 wireless and be able to control the volume and switch song tracks?

I have a older Dell Studio 540 w/o wifi but do have USB bluetooth installed on it. What I have is old analog stereo system hooked up thought the headphone out on the PC and thought the RCA AUX in jacks on the preamp this does sound quite good. What I would like to have is some control of the volume at least and even better be able to switch the music tracks.

So I'm thinking that I would just turn on the bluetooth on the tablet and pair it to the pc?

Any help would be great and if this is the wrong area to post please send me in the right direction

Read other answers

This is probably a little off the beaten path on this forum but figure at least its a place to start. I was given a new ATT Trek II HD tablet and was wondering if there was a way I could use it to control my WMP 12 wireless and be able to control the volume and switch song tracks?

I have a older Dell Studio 540 w/o wifi but do have USB bluetooth installed on it. What I have is old analog stereo system hooked up thought the headphone out on the PC and thought the RCA AUX in jacks on the preamp this does sound quite good. What I would like to have is some control of the volume at least and even better be able to switch the music tracks.

So I'm thinking that I would just turn on the bluetooth on the tablet and pair it to the pc?

Any help would be great and if this is the wrong area to post please send me in the right direction

Read other answers

Dear Lenovo-Community,my Thinkpad S1 Yoga change into tablet modus not only when I fold back the monitor but also when I have closed the lid normaly and than reopened it or sometimes by slightly moving the monitor or a minor percussion of the table. That is very annoying, because than I have no access to keyboard or touchpad while beeing in the laptop-shape. I can revive keyboard/touchpad by folding back the monitor and than back to the normal laptop shape, but this works only one time! After that I have to send the thinkpad in the energy saving mode and wake it up, to get keyboard/touchpad back.I think it is a problem with the sensor, but does there a software setting exist so keyboard/touchpad keep unlocked in tablet-modus? Or a way to switch off the tablet-modus completely? I can live without the tablet-modus and the thinkpad is probably too old to be worth a great repair.My system is fully updated. Any idea out there?

Read other answers

So my friend bought a non brand tablet from china with win vista on it. He turned it on and gave the error that a file is missing therefore it would not load the o.s.

I then though mayb I can pull out the hhd and plug it into my desktop and install winXp.

Well it ran well and it installed on the hhd and ran smooth. I shut off the comp and pulld out the hhd and placed it back in the tablet.

I turned on the tablet and it detected new hardware and askd if I should run it on safe mode, network, comand prompt, last good config or start off normally.

Well I try all amd nothing....

It would start but but then the xp icon would show with the loading bar and restart.

And back to the new hdwr detected screen....

What can I do??

A:Third party tablet wont start up. Missing OS file missing.

Read other 16 answers