Over 1 million tech questions and answers.

Can't adjust volume etc

Q: Can't adjust volume etc

Hi There,

I've noticed that I'm unable to open my Volume Control (the icon that is usually in the task bar).

So I decided to go to Start --> Programs --> Accessories --> Entertainment and it's not there either... in fact there's NOTHING there.

How can I get this back?

Thanks,
Amnesia

RELEVANCY SCORE 200
Preferred Solution: Can't adjust volume etc

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Can't adjust volume etc

you may need to reinstall your sound card drivers
go to control panel, then Sounds and Audio devices
click on the Audio tab
and under Sound Playback, see if there's anything listed there
if not, chances are you need to reinstall those drivers

Read other 2 answers
RELEVANCY SCORE 64

So I installed some new Windows updates today (whatever was available via Windows Update). I restarted my computer to enable the updates. When it came back on, my task bar was white for some reason. I solved that problem using the first solution I found here: [SOLVED] Taskbar is white

Well I didn't change my volume before doing that, so I don't know if it worked before I followed that solution. I do know that after following that solution, my volume meter no longer shows up when I change the volume via the keys for it on my keyboard. This is pretty annoying because it was convenient to always see my audio level when I adjusted the volume.

I am on a HP Pavilion dv7-6c95dx with beats audio, running Windows 7 64-bit. When I changed my volume, the beats audio logo with a volume meter under it would pop up, but it no longer shows up. I haven't noticed any change in the quality of my sound, and I can still actually adjust the volume level. The problem is the volume meter no longer displays to show me the volume level.

If anyone has any clue as to why this happened, that would be great!

A:Volume meter no longer displays when I adjust volume level

Try rolling back any keyboard driver updates, or go to the keyboard manufacturers website and download most up to date driver(s) from there.

Read other 2 answers
RELEVANCY SCORE 60

I've seen plenty of these threads but none of them are eMachines computers. I have an eMachines E525-2200 running Windows 7 Home Premium 64bit Service Pack 1.

The volume hotkey is Fn + arrrow up / arrow down. I press these and I see in the corner that the volume changes, but not the HUD like I'm talking about. I've already updated the driver to the latest version. All suggestions are helpful!

A:Volume HUD Not Appearing When I Adjust Volume

Hi there ... In order to get your Function Keys working you need Launch Manager software installed .. I think the Version you need is 3.0 .00 The problem of course is getting it working with Windows 7 as it was only meant for xp

Read other 7 answers
RELEVANCY SCORE 57.6

I don't know how it happened, but recently, the sound has gotten all screwed up. It seems to be set to an unbearably low volume at maximum. I can hear the asterisk system sound, but the others must be too quiet to hear. I can hear my MP3s and some other sound files, but they are so soft I can't hear them well at all. even when WinAmp is set to 100% volume. Turning the knob on my speakers has no effect at all.

I can hear sounds online (such as the Crazy Frog movie: http://dd0s.org/~wooolf/crazyfrog/ ), but the volume is rather quiet.

Using the Volume Control, I find that nothing is muted, and everything is at maximum. I can lower the volume to make it even quieter, but I can't make it louder (since it's at maximum).

I am currently using NVIDIA nForce drivers (the most recent ones)...in fact, I just installed these new ones, hoping it would fix my problem, to no avail.

I use WinXP Home, SP1.

What can I do?
 

A:Cannot adjust volume -- please help!

Something to check....

Go to Contol Panel >Administrative Tools >Services and be sure that the Windows Audio is set to automatic.
 

Read other 1 answers
RELEVANCY SCORE 57.6

Hey guys,

I posted this earlier in the Multimedia thread but was told to post it here.

I have been having trouble with my sound this past week. Is stays at 100%. I try to slide my volume, but it quickly goes back to 100%. I don't know what the problem is. I have ran dxdiag and it says there are no problems found. My speakers are Conexant High Definition SmartAudio. I have tried pretty much everything: googling it, but no answers there.

I do believe my roommate has something to do with it. He went to high school for technology, and after a dispute over my music being too loud he said he would start to control my volume. Some time during the week, I had found my computer had mysteriously restarted. So this has led me to believe that he has installed a program, which allows him to control my volume. I want to make sure he's doing this, so he can face the consequences. I just need your help. Is there something installed in my computer? What can I do to get rid of it?

There's also another strange thing that occurred. After posting this in the Multimedia thread, my volume somehow became adjustable again. Weird. I now have a feeling he can see what I do on my computer, and realized I posted this? I am so confused. I just would like answers.

Thanks so much beforehand. My operating system is Windows Vista and I have an HP Notebook PC, if that helps.
 

A:Cannot Adjust Volume

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:10:23 AM, on 2/28/2010
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v8.00 (8.00.6001.18882)
Boot mode: Normal
Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\SYSTEM32\WISPTIS.EXE
C:\Program Files\Common Files\microsoft shared\ink\TabTip.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\WTablet\Pen_TabletUser.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Windows\System32\igfxtray.exe
C:\Windows\System32\hkcmd.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\HP\QuickPlay\QPService.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe
C:\Windows\system32\igfxsrvc.exe
C:\Program Files\Java\jre1.6.0_07\bin\jusched.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\Windows\system32\taskeng.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\acrotray.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Webroot\WebrootSecurity\SpySweeperUI.exe
C:\Program Files\Common Files\LightScribe\LightScribeControlPanel.exe
C:\Program Files\Hewlett-Packard\HP Advisor\HPAdvisor.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Users\Owner\Program Files\DNA\btdna.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Windows\system32\wbem\unsecapp.exe
C:\Windows\netedit.exe
C:\... Read more

Read other 3 answers
RELEVANCY SCORE 57.6

I don't know how it happened, but recently, the sound has gotten all screwed up. It seems to be set to an unbearably low volume at maximum. I can hear the asterisk system sound, but the others must be too quiet to hear. I can hear my MP3s and some other sound files, but they are so soft I can't hear them well at all. even when WinAmp is set to 100% volume. Turning the knob on my speakers has no effect at all.

I can hear sounds online (such as the Crazy Frog movie: http://dd0s.org/~wooolf/crazyfrog/ ), but the volume is rather quiet.

Using the Volume Control, I find that nothing is muted, and everything is at maximum. I can lower the volume to make it even quieter, but I can't make it louder (since it's at maximum).

I am currently using NVIDIA nForce drivers (the most recent ones)...in fact, I just installed these new ones, hoping it would fix my problem, to no avail.

What can I do?

A:Cannot adjust volume -- please help!

Have you given it a try by plunning headphones into the jack? Try to bypass all external amplification, it may be your speakers.

Read other 3 answers
RELEVANCY SCORE 57.6

(Windows XP Home) When I attempt to adjust the volume using the slider on the Volume tab of the Sounds and Audio Devices section of the control panel, the volume gets louder as I drag the slider over, and then (without even releasing the mouse button), the volume automatically decreases as the slider moves to it's lowest position. It's as if the volume is pegged "low" elsewhere in the system, and the slider must reflect that value despite my trying to adjust it. TIA for any assistance.
 

A:can't adjust volume

Read other 6 answers
RELEVANCY SCORE 57.2

I just reformatted to XP, and I go and plug in my mic (which has no drivers to install), it works fine, but I can barely hear myself in it. So, I go to Sounds, try to turn it up, but windows says to find hardware since the microphone is corrupted. I go to the site, no drivers. Do Windows Driver search, nothing.

Any help?
 

Read other answers
RELEVANCY SCORE 57.2

This may be an HP problem. I'm not sure. When I open the speaker settings, the display shows the volume set at 100%, yet, I can barely hear the soundtrack of a DVD I am watching just inches away. I have tried using the sliding volume at the top of the keyboard as well as the volume control in the media player, which will only increase volume to 50% in Windows Media Player. Still too low for me. I can lower (from 50%) or mute the volume- just not increase it. Has anyone else had this problem? I would love to know how to fix this. Thanks!

A:Can't Adjust Volume on HP dv6985se- Too Low

Did you right-click on the audio settings. The master volume may be maxed but all the other volumes lowered (this has happened to me before). If that's not the case, use the device manager to uninstall the speakers and then reboot (the speaker should reinstall)

Read other 1 answers
RELEVANCY SCORE 57.2

hi!
my headphones r connected at the back of the CPU but i am getting the sound from the speakers too and if i mute them then the sound through the headphones vanishes too.there r no controls on the speakers itself what do i do?
pl help
 

A:adjust volume through headphones

Sounds like you got the wrong headset for the PC or the audio card is messed up. When you plug in the headset, it should open the connection to the speakers and mute them. Has it ever worked correctly??
 

Read other 2 answers
RELEVANCY SCORE 57.2

Hello
About: Dell XPS 8700 (with Realtek High Definition Audio and "Dell Audio" Software)
I have the same problem as mentioned in this thread from the Laptop section : http://en.community.dell.com/support-forums/laptop/f/3517/p/19497223/20324248.aspx#20324248
When i plug in my headphones, "Dell Audio" detects them correctly but the volume is not adjusted! In the windows volume control panel there is no headphone option listed.
Already re-installed the newest driver with no change...

Regards

A:No volume adjust for headphone

Hi Photosky,
After going through the above mentioned thread’s link and also after you mentioned that you have reinstalled the drivers, lets perform another step here and I hope this helps.

Plug your headphone jack in the audio in port.
Right Click on the volume speaker icon on the bottom right hand side on the desktop..
Select Playback devices
Then right click on your headphone icon
Select properties
Go to the levels tab and set the volume as per your wish.
Click Apply / Ok

Now unplug the headphone and plug it back in and check if this helps. Awaiting for your response.

Read other 14 answers
RELEVANCY SCORE 56.8

I just got a new ac11 sound bar.
It is impossible to adjust sound volume using its volume knob.
But I am able to adjust sound volume with the windows volume control widget.
My OS is windows 7 .

I tried my ac511 on another laptop, the volume knob works well.So I guess the hardware is all right.
Could anyone help me with this?
Thanks very much!

A:AC511 SOUND BAR,could not adjust sound volume with volume knob

Based on your tests, the AC511 hardware is ok.* Turn the comptuer and monitor off* Mount the AC511 to the monitor slots after removing the plastic strips* Plug the AC511 USB cable + USB extension cable directly into the Windows 7 computer USB port* Turn the monitor on, then the computer* Re-test

Read other 1 answers
RELEVANCY SCORE 56.4

I'm running Windows XP Professional with Realtek HD Audio. In my Master Volume mixer when I go to "Options" and then "Properties" Realtek HD Audio Output is selected as the Mixer device and "Playback" is ticked. "Recording" is shaded. When I bring the volume adjusters up there's all the sliders and under each slider is a box marked "Mute". If I change the Mixer device to Realtek HD Audio input "Recording" is ticked and "Playback" is shaded. When I bring up the volume adjusters for recording there's the sliders, each with a box marked "Mute" underneath, except all of the sliders, except "Recording" are shaded out. "CD Volume" "Mic Volume" "Line Volume" and "Stereo Mix" are all shaded.

In Realtek's Mixer those devices don't even HAVE sliders.

Any ideas why I can't adjust my levels?
 

A:Not Able to Adjust Volume Levels in Mixer.

I'm not following you entirely, but have you tried (R) clicking on the "mute box" selection when it appears? Does the speaker icon in the task bar have a red "X" on it? Have you gone to "system" in the control panel...than selected 'hardware' to get a look at 'device manager' and what see what it's saying? On your sound mixer click on everything that has a red "x" on it. I'm not meaning to oversimplify, but I think you will discover an easy way out of this problem once you know how to handle the Window mixer console.
 

Read other 4 answers
RELEVANCY SCORE 56.4

I would like to increase an normalize songs volume on my Sony mp3 player. Apparently "Mp3gain" is the best, but it's not compatible with Windows 10. Any suggestions for a free alternative ?
 

Read other answers
RELEVANCY SCORE 56.4

That little icon in the lower R/H corner of my moniter took a hike. I've checked the audio in Control Panel but could find nothing. Any ideas? VISTA in an HP Pavillion Elite M9515Y
 

A:Solved: Volume adjust icon went away.

Anybody?
 

Read other 3 answers
RELEVANCY SCORE 56.4

Well the title pretty much says it all. Every time I have a program open and I use the keyboard to adjust the volume the program that I am using minimizes. I searched these forums for an answer but couldn't really find anything. Does anyone else have this problem? I am not sure what to do and want to fix it.

This is on a computer less than a week old.

A:Programs minimize when I adjust Volume

  
Quote: Originally Posted by jbwt3


Well the title pretty much says it all. Every time I have a program open and I use the keyboard to adjust the volume the program that I am using minimizes. I searched these forums for an answer but couldn't really find anything. Does anyone else have this problem? I am not sure what to do and want to fix it.

This is on a computer less than a week old.


Hi and welcome

do you have any application that 'maps' specific keys? Was this an upgrade? what keys are you using for the volume?

Thanks
\

Ken J

Read other 9 answers
RELEVANCY SCORE 56.4

I'm running Windows XP Professional with Realtek HD Audio. In my Master Volume mixer when I go to "Options" and then "Properties" Realtek HD Audio Output is selected as the Mixer device and "Playback" is ticked. "Recording" is shaded. When I bring the volume adjusters up there's all the sliders and under each slider is a box marked "Mute". If I change the Mixer device to Realtek HD Audio input "Recording" is ticked and "Playback" is shaded. When I bring up the volume adjusters for recording there's the sliders, each with a box marked "Mute" underneath, except all of the sliders, except "Recording" are shaded out. "CD Volume" "Mic Volume" "Line Volume" and "Stereo Mix" are all shaded.

In Realtek's Mixer those devices don't even HAVE sliders.

Any ideas why I can't adjust my levels?
 

A:Not Able to Adjust Volume Levels in Mixer.

Anyone?
 

Read other 1 answers
RELEVANCY SCORE 56.4

Greetings, I just received my new inspiron 7459. I have a PS4 connected to the HDMI IN port. How do I mute or decrease the volume when using this port? The hardware buttons on the side of the monitor only seem to adjust the screen brightness.
The keyboard commands for adjusting volume work fine when using the computer itself, but do nothing when the PS4 is being used.
Thanks!

A:How to adjust volume (Inspiron 7459)

Hi Skridger,Thanks for posting.Since you just got this, does it have the Windows 10 Anniversary Update or just Windows 10?  PS4 connected to HDMI in. See the bottom of this page which shows an Xbox connected to HDMI in. It says, ""Press Button 1 to launch Dell customized volume UI". http://dell.to/2iJtGU9

Read other 3 answers
RELEVANCY SCORE 56

Hi everybody,

My problem is that I cannot adjust the volume of video clips 'normally' when using Media Player Classic. Whenever I use this program, it does not allow me to increase/decrease the volume on my default volume scale, instead, it uses a built-in volume scale and therefore forces me to use that stupid scale.

How can I disable this annoying feature of Media Player Classic so that I can adjust the volume as normally as when I use other programs.

Thanks in advance!
 

A:Adjust volume in Media Player Classic

1. Open Media Player Classic > View > Options > Playback > Output > Change to either your sound card name or DirectSound then apply.

2. Open up my computer

3. Go to C:\Documents and Settings\yourloginname\Application Data\

4. Delete the Media player classic folder

5. Restart.
 

Read other 3 answers
RELEVANCY SCORE 56

Hello,
I am running windows Vista on an Acer Aspire 9300 Laptop.
Since about 2 days I cant adjust my sound volume, because it freezes up when i do.
I can only press CTRL+ALT+DEL and press Start Task Manager, then it returns to Windows, starts up task manager but i cant click on anything, also the Windows button does work, exept i cant click anything in it.

I searched all over google, mircosoft and several other Support sites but no answer found.
tho i did find a similiar problem to mine:
http://www.daniweb.com/forums/thread82691.html

I am running windows Vista, Not XP

I hope you can help me,

Greetz,

Milan.
 

A:Laptop Hangs when I adjust Sound Volume

Read other 10 answers
RELEVANCY SCORE 56

Can not access sndvol.exe to create a shortcut to allow keyboard to control volume.

I am using a Standard PS2 wired keyboard for my HP Elite 8000 system. Details in my signature.

I discovered the following and wish to implement with my basic keyboard:

1) click your start menu. Type ?sndvol? in the search box at the bottom
2) Right-click-drag the sndvol program icon to your desktop and select the ?Create shortcuts here? option
3) Right click on the new shortcut and hit properties
4) Go to the shortcut tab, and click inside the ?shortcut key? box.
5) Make your shortcut key combo. For example I use ALT + F12. Hit apply and OK to close the dialogue box.

Although I am Administrator, I am being blocked from shortcut key which indicated "None" at the moment, to make create a shortcut to do what is suggested in the above instructions.

Can anyone advise a way to unblock (allow) me; or a workaround to adjust my volume and add a mute button shortcut from my keyboard (preferably from the up/ down arrows on the numeric pad) without going to a third party software or a purchasing new keyboard?

Thanks in advance.

A:How to adjust volume from Standard PS2 wired keyboard

  
Quote: Originally Posted by RJL24


Can not access sndvol.exe to create a shortcut to allow keyboard to control volume.

I am using a Standard PS2 wired keyboard for my HP Elite 8000 system. Details in my signature.

I discovered the following and wish to implement with my basic keyboard:

1) click your start menu. Type ?sndvol? in the search box at the bottom
2) Right-click-drag the sndvol program icon to your desktop and select the ?Create shortcuts here? option
3) Right click on the new shortcut and hit properties
4) Go to the shortcut tab, and click inside the ?shortcut key? box.
5) Make your shortcut key combo. For example I use ALT + F12. Hit apply and OK to close the dialogue box.

Although I am Administrator, I am being blocked from shortcut key which indicated "None" at the moment, to make create a shortcut to do what is suggested in the above instructions.

Can anyone advise a way to unblock (allow) me; or a workaround to adjust my volume and add a mute button shortcut from my keyboard (preferably from the up/ down arrows on the numeric pad) without going to a third party software or a purchasing new keyboard?

Thanks in advance.


SharpKeys!

SharpKeys - Home

RandyRants: SharpKeys 3.5

Thanks to SharpKeys, I have decided to make Keypad Minus set as Volume Down, Keypad Plus as Volume Up, and Keypad Del as Mute.

It can remap any key you want to anything you want, but this is what I use SharpKeys for.

SharpKeys d... Read more

Read other 3 answers
RELEVANCY SCORE 56

This has been annoying me for quite some time now.. Whenever I plug in headphone to my Lenovo Yoga 500-14IBD, the Realtek Audio Manager does pop-up an annoying message that I connected headphones, but it does not adjust the volume accordingly. It's slowly driving me insane that I cannot find a solution to it. To my knowledge it has been default since a few years that laptops recognise and memorise different volumes for the headphone-jack or the internal speakers. I have found several topics on this, dating back to 2013 already even (like here), where this was possible with a single click in the Realtek Audio Manager. But then, years later, in this topic of 2018 it seems it is not possible anymore? I cannot find any of the suggested settings in the Realtek Audio Manager, nor in the Sound or Device settings. Under "Device advanced settings" I do have an option to separate the inputs as different devices, indicating to me that it is possible for the outputs as well! Does anyone know how to solve this once and for all?

Read other answers
RELEVANCY SCORE 56

Hi
I'm using Intel Audio Studio - Sonic Focus 7.1 - Sigma Tel
I have Soundblaster 7.1 desktop powered speakers with a wired/remote on-off switch
with volume and bass controls.
Out of the clear blue, I can't adjust the volume for my headphones with the Soundblaster controls. When I unplug the headphones, the Soundblaster volume control works fine thru the speakers. I get sound ok when the headphones when they're plugged in, but the Soundblaster volume control does nothing. The system volume control, and WMP volume controls work fine on the headphones. It's just the controls on the Soundblaster that have no effect on the headphones.
Thanks.
oldmanlat
 

A:Cant adjust volume on headphones Sonic Focus

You need to re-install the sound drivers
I couldn't find the exact drivers, except for a page here: http://drivers.softpedia.com/get/SO...gmatel-STAC-92XX-Audio-Drivers-006-5682.shtml

If it is an addon sound card just search and download from the manufacture
If it is intergrated into your computer, just search your motherboard drivers
 

Read other 3 answers
RELEVANCY SCORE 55.2

I have been searching different forums where the speaker icon has disappeared from the notification area of the task bar, but have not found a solution to the particular problem I am experiencing. In my case the speaker icon is still visible but when I click on it, I no longer get the vertical bar which allows me to adjust the volume. I have made no recent changes to my computer and cannot understand why this has suddenly happened. I have gone to taskbar properties and tried turning the volume icon on and off but this has not cured the problem.

I have discovered the problem I am experiencing is limited to my user account only. I have one other named account and a guest account. The other user is able to adjust the volume from the speaker icon on the notification bar, and when I log into the guest account I find it is also working perfectly. However, when I log into my user acount it does not work. I have also tried adjusting the volume by going into Control Panel - Hardware and Sound - Sound - Adjust system volume but when I click on it nothing happens. However, when I go into the guest account I find I can adjust the volume from both the icon on the notification bar and by going through the Control Panel method.

I therefore suspect that my user account may have been corrupted in some way. I should stress that my problem is limited to my inability to adjust the volume in my user account. I do have sound, I just am unable to control it!

(I should add that I have run th... Read more

A:Cannot adjust volume from speaker icon or from Control Panel

The problem is obviously corruption of the user account. Try an sfc and maybe it will be corrected
System Files - SFC Command

Read other 14 answers
RELEVANCY SCORE 55.2

I was on some random website when I got the BSOD error code and automatic restart. I ran all my malware, spyware programs and got rid of everything. So, I restart my computer, and now I can't adjust the brightness. The place where you could do that is just not there. It doesn't let you. Not only that, it's as if I'm in safe mode, because I can't connect to the Internet or adjust the volume, but I'm not in safe mode, because everything's not blown up. Can someone please help me out? I'm losing my mind.

A:BSOD! Cant Adjust Brightness/Volume or Connect To Internet!

  
Quote: Originally Posted by Eddieranger


I was on some random website when I got the BSOD error code and automatic restart. I ran all my malware, spyware programs and got rid of everything. So, I restart my computer, and now I can't adjust the brightness. The place where you could do that is just not there. It doesn't let you. Not only that, it's as if I'm in safe mode, because I can't connect to the Internet or adjust the volume, but I'm not in safe mode, because everything's not blown up. Can someone please help me out? I'm losing my mind.


A repair install or restore from a backup before the problem started. You have one right??

Read other 3 answers
RELEVANCY SCORE 55.2

Somehow the file sndvol32.exe got deleted and I can no longer adjust the sound volume for anything but my speakers. This probably happened when I was trying to troubleshoot a weird echoing sound that I got when playing World of Warcraft. Now, I can't update, or even install any of my new sound drivers for Soundblaster Live! Value (PCI card) or Realtek'97 (onboard soundcard). I can't reinstall, update or repair windows due to some error that says something occured and it shutdown setup to protect my computer. Awesome.

Details:
When I try to unistall my SB LIVE drivers and use my onboard soundcard, windows starts automatically reinstalling the SBL drivers anyways. The only issue I run into using my onboard soundcard drivers is that I can't adjust sound volume for anything other than my speakers because it's missing sndvol32.exe.

Trying to update SBL is like going to hell and back. I let windows do its thing and install the drivers it currently has in my drive, then when I try to update from Creative's website, I get an error that their creative playcenter could not be found. But it clearly has installed the playcenter because it shows up in the control panel.

I'm going in circles and I'm going to go insane.

A:sndvol32.exe missing -- Can't adjust volume + can't update drivers

Hi Sebboh, Have You Tried Searching For The File??

...in other locations on your computer?? If you have an "I386" folder on your "C" drive, open the "I386" folder. There should be a "Sndvol32.exe" file that is backed up there.. You should be able copy and paste the Sndvol32.exe file from there to the C\Windows\System32 folder where it belongs.

If that doesn't work Try System Restore ...

or find a Windows XP CD, or find somebody with a working Windows XP and a diskette or USB drive to copy the file.

Read other 2 answers
RELEVANCY SCORE 55.2

F1 F2 F3 lost function to adjust voice volume from time to time. Even when they're function back to adjust voice volume, no voice bar shown on screen

Read other answers
RELEVANCY SCORE 55.2

I'm trying to write a simple batch file that would mute or turn down the volume at startup. The idea is to stop the obnoxious MS startup tune when booting up in a place where I don't want attention; i.e. on a plane, in a meeting, classroom, etc. As a techie I'm way too lazy and forgetful to mute the sound before logging off everytime and would much rather write a complicated script to do this.

ps. why don't laptop makers install the old toggle volume switches?? click=on, off.. it would be such a simple solution to this..

thanks,
 

A:Solved: Need help with creating a batch file to adjust volume

Read other 8 answers
RELEVANCY SCORE 55.2

F1 F2 F3 lost function to adjust voice volume from time to time. Even when they're function back to adjust voice volume, no voice bar shown on screen

Read other answers
RELEVANCY SCORE 55.2

Hi I had a virus previously on my pc before which has been resolved and don?t know if it had anything to do with sound level seems like they are worse was sent here by a different technician , I am having problems with speaker volume is low as well as is the microphone on this computer , I keep trying to fix volume levels in my laptop Acer 5670 and till now can?t get volume up I checked control panel and settings for sounds and audio devices I don?t know if this has anything to do why the volume is so low but I opened master volume and see that bass and treble are set to low and there is no way of adjusting it seems even if I uncheck and recheck 1 Microphone Boost it stays same low cant move arrow to adjust to high and spdif is set to ? way up and same thing on that can?t move either any way to fix this problem also have have problem with built in 1.3 mega webcam when in yahoo messenger it seems blurry any way to fix that is a external webcam better way to go or are there other options need help thanks ,frankp747

A:Problem with Volume speakers ,microphone cant adjust or low and low bad webcam

Where did you receive help to remove the virus? Was it here or another site?

Read other 24 answers
RELEVANCY SCORE 54.8

This problem has started in recent weeks (yes, too far back to do System Restore):

When I reboot, if I click on the speaker icon in the Notification Area, it tells me that Windows Audio is not running (and so no media app will produce any sound). However, if I then raise or lower the volume via my multimedia keyboard, Windows Audio starts running.

This is despite the fact that in Services, the Startup Type of Windows Audio is Automatic. So why doesn't it start on reboot?

A:Windows Audio Service doesn't start until I adjust volume

Does Event Viewer have entries related to that service?
Event Viewer - Open and Use in Windows 7

Read other 7 answers
RELEVANCY SCORE 54

Does anyone have any idea on how to correct a problem I am having with my deaCentre A520? All of the sudden I can no longer use the touch buttons on the bottom of the screen. They light up when touched - HDMI, brightness, volume, etc - but they no longer work. I have been running Windows 10 for sometime now - I doubt it is a software issue with MS. Any idea on how to correct this issue? I can use the touch screen just fine - just not the control buttons on the bottom of the screen. Thanks.

Read other answers
RELEVANCY SCORE 48

Using the laptop on battery, when I press on F11-12, the brightness meter is shown on the upper left like usual, but it won't move up or down.  Yet I think it's strange that all other places I can adjust brightness are fine, and especially strange that everything is working totally fine on AC power.
I tried uninstalling the Generic PnP monitor and reinstalling, but to no results.  Also, both my power settings on battery and on power indicate no adaptive brightness.

Read other answers
RELEVANCY SCORE 43.6

Hello. I am playing a game which uses midi files for background music. Unfortunately, the midi playback volume is ALWAYS maxed out, such that it drowns out voices. Is there a way to adjust the audio balance so that the midi volume is quieter than other sounds? I remember windows XP had a bunch of audio balance options (left/right speaker, wave, midi, etc...):

http://i.imgur.com/9BdlE.png

but win7 only has left and right balance. Help?

A:Any way to adjust MIDI playback volume? MIDI playback way to loud!

Haven't heard the term MIDI used for a long time.
Did you scroll down in the speaker volume popup? If you have more than two speakers defined, there should be a scroll bar on the right.

Read other 9 answers
RELEVANCY SCORE 42

I'm not sure if this happened with 5.55, but with 5.56, when I hit the volume up or down on my keyboard to turn the sound down for everything, it turns down winamp's volume bar too. Sometimes I can move winamp's volume bar up and down and it won't even be working. What causes this? It's pretty annoying for the music to turn down twice as fast or winamp's volume bar to not even work at all.EDIT: Moved to a more appropriate forum

A:Volume keys turning down computer volume and winamp volume at the same time?

Bump

Read other 4 answers
RELEVANCY SCORE 41.2

Encrypted Volume Check: Volume Info on \\?\Volume{X}Can Not Read

Found this in my Event Viewer on each start/restart. I don't have any Volumes that I have encrypted. Is this malware? I've run everything prior to noticing including Windows Offline Defender.
Not sure if this is even the correct area to post this!
Glenn

A:Encrypted Volume Check: Volume Info on \\?\Volume{X}Can't read

I'm going to take a guess, please upload a screenshot of the disk manager (Windows Key+R to open the Run dialog, type diskmgmt.msc, and press Enter).
Posting the actual entry from the Event Viewer can help.

Read other 9 answers
RELEVANCY SCORE 36

So I have a Blue Yeti, and I'm an online animator/voice actor. Whenever I record audio on my Blue Yeti (OR any other mic) I record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as I yell or whatever. This is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. However, afterwards, it means I have really quite recordings. Not a problem right? Now that it's recorded right, I can boost the volume of the entire clip afterwards right? WRONG. I'm not an audio expert so I must be missing something. But why in GODS NAME would the audio distort and peak AFTER it's recorded successfully? It's all there, it's all clean audio. If I turn the volume on my speakers all the way up it sounds CRYSTAL CLEAR! All I want to do is do that INSIDE the computer so that when I upload it to youtube people don't have to turn their speakers so far up. But if I increase the clips volume in the computer, it distorts! It sounds awful! Why?! I tried in Sony Acid and Audacity and they both do the same thing! Why?! I seriously don't understand what I'm missing here! I can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart! If anyone understands audio stuff, please tell me what I'm doing wrong.

A:Soft Recording volume with Blue Yeti, increasing volume distorts audio

I have a home recording studio using Sonar X1 software.

I don't know about Acid, but it should allow clean recordings. Audacity the same way.

I record, generally, in the -10 level with my recording program, at 24 bits/44.1 Khz. At -10, I have plenty of headroom and can then adjust the levels after the recordings and at mixdown. I export the mix as a standard 16 bit/44.1Khz wav file and then "finalize" whatever I want to do to the song, including levels, with "Goldwave" (an audio editior).

I assume you are converting the audio to MP3? If that is the case, that may be where the distortion is occuring? I find that 128Kb MP3's are very poor and at a minimum use 198 Kb MP3's.

Read other 2 answers
RELEVANCY SCORE 36

Gentlemen, 
 
I know I should read and followed the pinned piece before I asked for help, but given the emergency please excuse me,...here is what I encountered:
 
Blue Screen of death w/ description says uncorrectible hardware error, I guess that's truly bad. 
 
I did the memory test using sony vaio/ microsoft OEM, memory is good.
 
I did the system restore several times, although completed and says successful, but blue screen keep coming back.
 
I went ahead did the CHKDSK, took me 4 and half hours, found 1 bad cluster, but corrected it says, then when i reboot windows, Intel Matrix Storage Console pops up at lower right hand corner of computer, telling me  "a drive is failing, back-up asap; seems to me it's port 1.
 
I know I need to back up, but given this situation, does it mean i have no choice but to expect this solid state drive is dying and can't be repair??
 
http://i400.photobucket.com/albums/pp89/msibanker/IMG_20160501_053325.jpg
http://i400.photobucket.com/albums/pp89/msibanker/IMG_20160501_053312.jpg
http://i400.photobucket.com/albums/pp89/msibanker/IMG_20160501_054004.jpg
 
 

A:BSOD/ Intel RAID volume failing but CHKDSK clean volume

Here is the spec of my laptop:
 
Sony VGN-AR770U Vista Ultimate sp2
 
Intel 2.6 Ghz
 
Solid State HDD 320GB set 2 partitions
 
did not installed any new stuff lately, ran Malwarebites anti malware, clean at safe mode. 
 
Many thanks

Read other 1 answers
RELEVANCY SCORE 36

This on is quite perplexing to me. This is stemming from a volume problem that I had posted before. I have more detail and have narrowed down the problem but not the cause of such. When ever I click the volume control in winamp, not adjust necessarily, just click, my wave setting in my volume control (pannel that comes up by double clicking the speaker in the tray) drops. Of course this affects my overall volume. It is sparatic and does not drop the same amount two times in a row but will drop everytime I click volume in winamp. I am running winXP pro and have not installed so much as an update since the last time this was happening. The only thing I did change is I set up voice recognition in Office XP but I was having this problem before that. I have uninstalled and cleaned out all winamp files and reinstalled. Any suggestions? Winamp is the only player of any kind that this currently happens with.

Also, whenever I am using winamp to play an mp3 or streaming audio and I open another program, any program, or even just minimize/maximize a window, the audio starts cracking. This also has never happend before except of course when there is a heavy load on the system. As I said I am running XP pro, and FYI a Duron 900 cpu and 448MB RAM. As I am having these problems I am using 5% to 10% of my cpu and have 21000k physical memory availible according to task mgr.

Thanks.
 

A:When clicking volume in WinAmp my wave setting in Volume Ctrl drops.

I did some research at the Winamp message board and came up with this.

JP
 

Read other 1 answers
RELEVANCY SCORE 36

I have a website I hit everyday that has been working great.  I start audio and could scroll down with arrow keys. After install of Bios Update - 7 V1.42Hotkey Features Integration V.9.0.4.1 The arrow keys now control volume AND scrolling. Is there a way to disable the volume control of the arrow keys? Thanks. Peace out.

Read other answers
RELEVANCY SCORE 36

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz, x86 Family 15 Model 2 Stepping 9
Processor Count: 2
RAM: 2046 Mb
Graphics Card: NVIDIA GeForce FX 5200 (Dell), 128 Mb
Hard Drives: C: Total - 76285 MB, Free - 19597 MB; F: Total - 476937 MB, Free - 461259 MB;
Motherboard: Dell Computer Corp., 0W2562
Antivirus: AVG AntiVirus Free Edition 2013, Updated: Yes, On-Demand Scanner: Enabled
 

A:missing volume panel no mixer i hit volume and it says go to add hardware to add audi

You appear to have a Dell Dimension 8300 desktop.

What's the 7-character "service tag" number on it?

------------------------------------------------------

Is the sound working?

Are there any entries in the Device Manager with a yellow ? or ! next to them?

-------------------------------------------------------

You appear to have AVG Free Edition 2013 installed.

Have you been using its registry/file cleaner feature?

Have you been using any other registry/file cleaners?

--------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 36

My Windows 7 was installed in Drive C: in Primary partition.

I only have another drive D:, which is also a Primary partition and 200GB in size.

I need to create another drive. So, I use 'Shrink Volume' on Drive D: and free 30GB.

Then 30GB become free space and when I right click on that, I choose to 'Simple Volume' and then format it as NTFS and assign the drive letter E:. All of a sudden after I did that, all the partitions(C: and D now no longer say "Primary Partition". The blue color on top of the partitions also changed to a yellow/brownish color. My guess is that they have been converted to a Simple Volume too.

Well, then I just restart my PC and astonished that my windows 7 can't load. Only a blank screen come ahead to me. No error message given.

I use my Windows 7 DVD and in repair windows section, I use command line and by 'diskpart', i found, my all partition (C: and D: and E present their and there file system is: 'NTFS' and Type is "Simple". No drive there marked as a 'System' or 'boot'.

What should I do now, to recover my Windows 7?

Any kind of help will be appreciated. Thanks.
 

Read other answers
RELEVANCY SCORE 36

Hi,
Windows XP Home
RealPlayer 10.5

Ok, I used to have RealPlayer and all it's junk till I wised up
and removed it from my system over a year ago.

However, I recently installed the basic RealPlayer (that is...only allowing
the features that I needed for video/audio) in order to watch NASA TV
e.g. DEEP IMPACT and today's DISCOVERY launch.

My question is regarding why, when I mute or adjust the volume on
the RealPlayer, that it also does the same to the computer's Volume
Control (Speaker Icon in System Tray...Wave setting).

I had been viewing on the RealPlayer, muted the sound and then later
was wondering why I was not able to hear any of my videos, music, etc.
The thought occurred to me to check the Speaker Icon and, sure enough,
there was a check at Wave>>Mute.

Is there a setting I can check/uncheck that will allow RealPlayer and
Computer volume to be independent of one another?

Thank you,
 

A:Adjusting RealPlayer volume affects Comp volume settings

Read other 9 answers
RELEVANCY SCORE 36

Here is a question I can't seem to find the answer to in the archives.

How can adjust the volume output from my Windows ME machine (with SoundMax Digital Audio) so that the volume of the background music I like to listen to (via RealOne Player version 6.0.10.505) is quiet, but the other important sounds my PC makes (like email or calendar notifications) are loud enough so I can hear them?

I've seemingly tried all combinations of settings for the volume sliders/adjustments, including:

1) The volume knob on my speakers
2) The RealOne Player volume slider
3) The Windows volume control panel "Volume Control" slider
4) The WIndows volume control panel "PC Beep" slider

Even when the "PC Beep" volume slide is set to maximum, and the "Volume Control" slider is set near minimum in the Windows volume control panel, the PC beep is virtually inaudible when the background music is acceptably quiet (by adjusting the RealOne volume slider and/or the volume control on my speakers).

Am I doing something wrong? Is there some other way that I'm not thinking of to boost the volume of the system sounds my PC makes, while keeping the RealOne music volume low?

Thanks,

--Dean
 

A:Boosting system beep volume relative to other sound volume?

Read other 8 answers
RELEVANCY SCORE 35.6

Before I upgraded to Vista, there use to be a green bar at the bottom of the screen, so whenever you increased/decreased the volume, you would know.

This has disappeared.

Anyone know where a copy of this "OnScreen Display' Tool can be found?
 

A:Solved: Green Volume Bar on Screen Displaying Volume

Read other 11 answers
RELEVANCY SCORE 35.6

For some reason the onscreen display for the volume controls and screen brightness on my W530 stop working after coming back from sleep or resume. I updated Power Management, Hotkey and Interface but the problem still rears its ugly head. If I go into screen resolution and advanced and on screen then uncheck Enable onscreen and recheck it...the controls work again.

A:Volume control buttons do not display volume level...

try to reinstall the OSD software. Uninstall the current OSD software that you have, and download the latest version from below.
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS000949
 
Edit note: Wrong link. See below for the correct link.

Read other 5 answers