Over 1 million tech questions and answers.

Random BSOD - Lenovo V570 laptop - power mgmt driver

Q: Random BSOD - Lenovo V570 laptop - power mgmt driver

Good morning, SF and BSOD teams:

I've been suffering from random BSODs on my Lenovo V570 laptop running Win 7 Home Premium 64-bit on numerous occasions. This issue currently springs up at seemingly-random times, although there might be some correlation with me trying music-related activities (e.g. opening WinAmp, Google Play Music, etc.). The on-screen BSOD information consistently mentions power management driver, hence the reference in this post's title.

Some history with this laptop: I purchased it new in Sept 2011 - no issues
Shortly thereafter, I installed Ubuntu with a full disk wipe, re-format, and re-partition
After frustrations with Linux, I reinstalled Win 7 with a freshly-purchased retail full license (e.g. not the OEM recovery disk)
Note: it was after this event that the BSODs started to occur
I've since reinstalled Linux and Win 7 at least one or two times, each time with a full disk wipe/format/re-partition and seemingly successful installation.

One additional note: during each of the Win 7 installs, it seems as though virtually none of the expected drivers are available. I have to manually install ethernet, wi-fi, graphics, etc. before the thing starts behaving as expected. Again, this was all using the legitimate retail full Win 7 install disk and drivers directly from Lenovo's support site.

In any event, I would greatly appreciate any help on this issue.

Thanks!
-Danny

RELEVANCY SCORE 200
Preferred Solution: Random BSOD - Lenovo V570 laptop - power mgmt driver

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Random BSOD - Lenovo V570 laptop - power mgmt driver

Welcome aboard.

Code:
kd> !irp fffffa8005af41c0
Irp is active with 10 stacks 9 is current (= 0xfffffa8005af44d0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8007c87060 00000000 fffff800034bab40-fffffa8005f74a10 Success Error Cancel pending
\Driver\usbhub nt!IopUnloadSafeCompletion
Args: 00051100 00000001 00000001 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8005dcf770

Args: 00000000 00000000 00000000 00000000
Is there any USB devices connected? What is it? Remove it (if it is anything other than the keyboard and mouse) and see it the situation changes.

Also, Disable USB Selective Suspense.
USB Selective Suspend - Turn On or Off

Also, Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
Let us know the results.

Read other 1 answers
RELEVANCY SCORE 88.8

SO I just got a new hard drive for my lenovo v570 laptop, I was able to find and install the wireless driver fine, but whenever I install the intel graphics driver, it causes a bluescreen on startup. (If I posted in the wrong place, let me know) 

Read other answers
RELEVANCY SCORE 84.8

Having thoroughly read (1)Blue Screen of Death (BSOD) Posting Instructions, (2)Dump Files - Configure Windows to Create on BSOD and (3)How to Run Disk Check in Windows 7, I'm still having problems in my ability extract the info requested in the previously mentioned posts that might allow someone to more easily assist me.

First of all, the machine is a Lenovo V570 running Windows 7 Home Prem 64-bit on a Toshiba MK6465GSX 640GB HDD with 6GB RAM. It is a friend's laptop...explaining the lack of precautionary backups or system images that could take this process in a different direction.

Before I explain what I have done and encountered, let me say that I have been unsuccessful in extracting any dump files or running a Disk Check that successfully "logs". I realize that my chances for assistance will be significantly diminished because of this. Hopefully someone reading this will see why or offer other suggestions based on the following documentation of what I have done and thus far encountered.

The BSOD screen goes by so fast that I had to take a video of it happening. It only lasts for 3 or 4 frames on my camcorder. Here is a frame of that:

Of course this sends me immediately to a Windows Error Recovery screen and launches into Startup Repair. It is also unsuccessful. It provides me however with the following problem details:
]

Startup Repair's diagnosis and repair details:

I'll spare you the other 17 or so pics. They also show error code "0x0... Read more

A:BSOD 0x00000050 on Lenovo V570 laptop (Pics now showing)

If you cannot boot at all, first follow it....
Follow it:
Troubleshooting Windows 7 Failure to Start

If still not working, or you cannot follow it for any other reasons, let us know.

Read other 1 answers
RELEVANCY SCORE 75.2

Computer's off, it's been off since morning, and I can't get this thing to work! The power button isn't lit, nothing. I press it, and it doesn't turn on the computer at all... I've tried doing these things: -use battery only-use charger only-remove charger and battery, hold button for 30+ seconds, and try again.... none of those work... is my laptop fried? it sucks because i JUST bought this thing a month ago.

A:Lenovo v570 - Power Button doesn't work, Computer ...

hi muffinmonkcan you try one key recover button to check if it works?

Read other 6 answers
RELEVANCY SCORE 73.2

original Windows Professinal 7 64-bit OEM
Laptop old 2 years
0 times reinstalled windows
Hi, when I botted my laptop I let the ee optimizer(an optimization program from lenovo) to optimize my laptop then I got BSOD with the following error;

STOP: 0x00000050 (0xFFFFF880009AA000,0X0000000000000000,,0XFFFFF800032766FA,0X0000000000000000)

I cant boot in safe mode . The only thing that I can boot is "launch startup repair". I ran repair,
windows memory diagnosis,both came clean and I tried to restore the system which offers startup repair but nothing.

Please help
P.S
The closest thing I found was; http://forums.lenovo.com/t5/IdeaPad-...th/td-p/834203 I cant find that file,as for dump files I cant find them and I dont know how to start the sf diagnostic tool since nothing will boot except startup repair

A:Bsod at startup on lenovo V570

Please follow the Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 72.8

Hi, on my laptop the control key is ALWAYS pressed. I can't fix it no matter what. I tried prying off the key with a screwdriver & making sure nothing was jammed in there, there's nothing wrong with the key itself, it looks great on the inside.

Now here's the kicker:

The CTRL key is ALWAYS on, however, if I open the on screen keyboard program, it fixes the problem. Which makes me think it's a windows issue rather than an actual physical keyboard issue.

I'm at the point now where I'm just going to re install windows if I can't fix it

if that doesn't work I'll take it to a repair shop (So expensive..yikes)

So, any suggestions guys?

Any help is extremely appreciated.

P.S - It does this EVEN if an external keyboard is connected.

A:Lenovo v570 laptop - CTRL key always stuck down

The on-screen keyboard would be expected to perform correctly because it's a virtual keyboard in Windows and not mechanical. Despite your hesitation I can't imaging this being a Windows issue. However the problem replicating on an external keyboard is vexing. Is it USB or PS3?

When did you first notice this? How does it manifest itself? A Cntrl command is executed when you type a letter?

Stick around as someone will likely recognize the issue or have an idea that helps.

Read other 2 answers
RELEVANCY SCORE 71.2

What's the purpose of installning Power Mgmt Driver?

A:X230 Laptop (ThinkPad) 23301E0 - Power Mgmt Drive...

Dear kstrid, Welcome in lenovo community, Installning Power Mgmt Driver, will organize your machine power consumption and will improve the battery performance. Regards,Joseph

Read other 4 answers
RELEVANCY SCORE 69.6

Posted this to Reddit 4 days ago, but of course, no one responded. Anyway, here:

My brother's computer: Lenovo v570 laptop running Windows 7, 64-bit Intel Core i5 processor, 750 GB hard drive, 6 GBs of RAM, integrated graphics

I'm trying to help my brother fix his laptop, but it's nearly impossible. I'm fairly well-versed in this type of black magic, but this was so unyielding that I'm forced to post here.
"The other night I tried starting my laptop, and it asked me if I wanted to go into startup repair or boot normally, which I thought was strange, and I just chose to start normally, and it BSOD'd before the time the login screen would usually come up. I figured there might be a potential issues because I had postponed restarting my computer a couple of days after Windows updates were done. I usually keep my computer clean, protected by Kaspersky and Malwarebytes, etc. so I figured that the update would be the most likely culprit.
I tried to do a system repair off the recovery hard drive, and it didn't work. Then I tried launching into safemode, still BSOD'd; the "last known good configuration" wouldn't boot either. I tried multiple system restore points, and they gave various errors. None worked, however. Some said it couldn't read the memory at some sort of address, and others said something about setupapi.dll. It's sort of time consuming to get the exact error.
I also tried sfc /scannow and it said there was a system repair pending and to restart t... Read more

A:My brother's computer: Lenovo v570 laptop running Windows 7, 64-bit Intel Core i5 pro

Please follow - http://www.techsupportforum.com/foru...ta-452654.html

Read other 19 answers
RELEVANCY SCORE 69.2

Could someone plese help me to figure out what I can do to get my original drivers for lenovo v570 laptop. Someone reinstalled windows 7 pro back on the laptop and when I got it back it had an usb eithernet plugin on the side of it and I've been trying all day to look around for the drivers for the intel core "15 so I don't have to put in my password everytime I login  to my computer.Hope someone know what I'm talking about and can guide me to the right directon to find and to give advice on how to add to laptop. Thanks for any help you can give me.  done got really aggrivated with this situation. Thanks, Teresa

Read other answers
RELEVANCY SCORE 66.8

Hi there

I have a pc that is Windows 8.1 Professional and it is getting regular random blue screens (sad face).
When I look at BluescreenView it shows several IRQL_NOT_LESS_OR_EQUAL and some DRIVER_POWER_STATE_FAILURE

I would be very grateful if you could take a look at the log files attached and let me know what you think might be causing the issue?

Thanks
PCTS

A:BSOD - Random. IRQL_NOT_LESS_OR_EQUAL & DRIVER POWER STATE

Update drivers in red. What devices do you have connected via USB? Please disconnect them.

Code:
SiLib.sys Wed Feb 7 00:13:54 2007 (45C90BB2)
USBXpress Development Kit
http://www.carrona.org/drivers/driver.php?id=SiLib.sys

StkCSF.sys Wed Dec 12 14:02:48 2007 (475FDBF8)

StkCSF.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

StkCPipe.sys Tue Aug 11 12:14:44 2009 (4A814494)

StkCPipe.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

SiUSBXp.sys Tue Nov 3 23:16:08 2009 (4AF0ABA8)
Silicone Labs USBXpress Development Kit
http://www.carrona.org/drivers/driver.php?id=SiUSBXp.sys

StkCSam.sys Tue May 4 08:32:52 2010 (4BDFBF94)

StkCSam.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

StkCMini.sys Mon Jun 7 09:33:52 2010 (4C0CA0E0)
Syntek USB 2.0 Video Mini Driver [br] EASYCAP DC60 - STK1160 CHIPSET Driver
http://www.carrona.org/drivers/driver.php?id=StkCMini.sys

Otometricsstkflt.sys Fri Oct 22 16:51:20 2010 (4CC1A4E8)

Otometricsstkflt.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

SBFWIM.sys Mon Sep 17 14:55:25 2012 (50571DBD)
Sunbelt Firewall Software
http://www.carrona.o... Read more

Read other 6 answers
RELEVANCY SCORE 66.8

Hey guys I am new here and need some help with my random BSOD. I think it only happens when I wake the system from sleep mode. It does it while in the middle of a game or if I an just cruising the net. I haven't notice it after a fresh boot, but like I said mainly after I wake it from sleep mode. Any help is appreciated.

How do I get the mini.dmp file to zip? It keep telling me I don't have permission, yet I am the only user for the PC?

A:Random Driver Power State Failure BSOD

  
Quote: Originally Posted by Midnightorion


Hey guys I am new here and need some help with my random BSOD. I think it only happens when I wake the system from sleep mode. It does it while in the middle of a game or if I an just cruising the net. I haven't notice it after a fresh boot, but like I said mainly after I wake it from sleep mode. Any help is appreciated.

How do I get the mini.dmp file to zip? It keep telling me I don't have permission, yet I am the only user for the PC?



This crash was probably caused by atapi.sys. It is an ata driver for things like your CD player. I would run a system file check to verify and repair it. To do that type
cmd in search>right click and run as admin>sfc /scannow.

Let us know the results
Ken


Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Wed Jun 23 12:54:26.157 2010 (GMT-4)
System Uptime: 0 days 9:34:49.812
BugCheck 9F, {3, fffffa80046a7060, fffff80003e21518, fffffa8004095c60}
Probably caused by : atapi.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System

Read other 2 answers
RELEVANCY SCORE 66.8

A week ago I experience a BSOD stating Driver Power State Failure in any moment. Don?t matters if I am using a design program or a web explorer. Can anyone help? I have attached the Minidump as a .rar file.

Thanks

OS: Windows 7 x64

A:Random BSOD - Driver Power State Failure

nobody?

Read other 1 answers
RELEVANCY SCORE 66.8

Hi guys, just started getting this BSOD over the last two days...

Any help is appreciated

- Running Win 7 X86
- OEM version of Win 7 running on a custom machine
- Been running this configuration for 2 years no issues
- Hardware is about 2 years old

A:BSOD 9f - DRIVER POWER STATE FAILURE, seems to be random

Your crash reports indicate a possible problem with your Windows installation. Please follow the Windows Genuine and Activation Issue Posting Instructions. Post the results in your next post; do not start a new thread.







  
Quote: Originally Posted by Brink


NOTE: The MGADIAG report does not contain any sensitive or personal information, and is best posted un-edited for us to be able to help.

7. Select (highlight) all of the MGADiag report that you just pasted, and click on the code box # toolbar icon to wrap the report in a code box when posted. (see screenshot below)

Attachment 219589

Read other 9 answers
RELEVANCY SCORE 66.8

Hello,

I'm getting random driver power state failure (9f) BSODs without any discernible trigger event as far as application. I used the sevenforum tool to collect the information. You guys have been very helpful in the past and hopefully can help with this issue too.

Thanks.

A:Random 9F Driver Power State Failure BSOD

Hello dpm5049.

You need to update your realtek driver, as advised here, too.

Code:
fffff880`06247000 fffff880`062cc000 Rt64win7 (deferred)
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Fri Jun 10 12:03:15 2011 (4DF1BAAB)
CheckSum: 0008B67F
ImageSize: 00085000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
All the recent dumps I have checked are identically same, and vague.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800513e050, fffff80001c5a518, fffffa80040cda50}

Probably caused by : sbp2port.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
********************************************... Read more

Read other 1 answers
RELEVANCY SCORE 66.8

I've got randomly occouring BSODs on my Dell XPS 9000. The BSOD is always a driver power state failure. Log files attached.

My system is ~3 years old. Running a 2 year old Win 7 Ultimate x64 image.

Please help.

Thanks!

A:BSOD - random - always Driver Power State Failure

Might have something to do with the fact that your uptime (time since last reboot) was almost 6 days.

The slightest memory leak, etc will magnify over that time.

Read other 9 answers
RELEVANCY SCORE 66.8

The BSODs are random but seemed to be happening more often and don't happen while I'm working on laptop but when I step away for awhile. I thought it might be while something plugged in to laptop like phone or tablet via usb but when it happened earlier today nothing was plugged in. It never happens while just running laptop off battery but I rarely do run off just battery if any of that matters. Also when it happened today and maybe on past days too...I would notice laptop sounded like the insides were racing.

I found this site through another site that recommended using SF Diagnostics Tool to collect data which I did. Now I see the DM Log Collector tool referenced in your instructions. Not sure which to use. Let me know if the latter is the correct one and I will redo my upload.

Thank you for any help or advice you can provide. Appreciate it.

A:Random BSOD with Driver Power State Failure

Please use the DM Log Collector & check HP for BIOS updates.

Read other 6 answers
RELEVANCY SCORE 66.8

Thanks for the help in advance, new to the forum. I recently reinstalled win 7 32bit when I put a new hard drive in pc. Its a 5 year old Hp Pentium 4 2.8ghz with 2.5 gig ram. Runs great, this is the only problem that I have: Once or twice a day I get the BSOD that says it has a Driver Power State Failure. I thought I had updated all drivers during reinstall, but I must be missing something?? I cannot read these dump files, but I have attached the latest. Any help would be awesome:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 00000003
BCP2: 85C8D690
BCP3: 80D8ADB0
BCP4: 87DAAB28
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

A:Random BSOD Driver Power State Failure

Hello,

It seems your Conexant TV Tuner drivers are the cause here. Try updating the drivers, see if that helps. If you can't find an update, remove the device.
Code:
cx88vid.sys Tue Oct 14 14:44:16 2003 (3F8C4400)

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\JK\AppData\Local\Temp\Temp1_042811-24203-01.zip\042811-24203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?ffffffff`80d8ada4?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0x82c02000 PsLoadedModuleList = 0x82d41570
Debug session time: Thu Apr 28 14:21:03.093 2011 (GMT-4)
System Uptime: 0 days 2:20:02.218
Loading Kernel Symbols
...............................................................
................................................................
.....................................
Loading User Symbols
Loading unloaded module list
.........
0: kd> !analyze -v
*******************************************************************************
* *
* ... Read more

Read other 2 answers
RELEVANCY SCORE 66.8

Hello,

A few minutes after logon, applications become non responsive. Then the screen will totally freeze, meaning a hard restart is the only option. Occasionally, I also get a driver power state failure BSOD instead of the screen freezing up (not sure what this means). Laptop runs fine in safe mode and have been attempting to determine which service/application/hardware is causing the problem using msconfig, but to no avail. Please help!

A:Random BSOD - Driver Power State Failure

Welcome to Seven Forums .

Several critical files are missing from the zip you uploaded, please rerun the SFDT until it completes
generating & collecting all the files.
MSINFO32 is empty due to the WMI service not being active.
Please confirm you have these services running and active:
Security Center, IP Helper, Windows Management Instrumentation.
> Services.msc > hit enter.
Attachment 286395

From I could gather with what was uploaded, several courses of action is needed for now:


Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800af9e060, Physical Device Object of the stack
Arg3: fffff80004c2e748, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8005b37010, The blocked IRP

Code:
>[ 16, 2] 0 e1 fffffa800af9e060 00000000 00000000-00000000 pending
\Driver\usbhub
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 fffffa80098a2e10 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\iBtFltCoex.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iBtFltCoex.sys
*** ERROR: Module load completed but symbols could not be loaded for iBtFltCoex.sys
\Driver\ibtfltcoex
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffff... Read more

Read other 3 answers
RELEVANCY SCORE 66.8

Ever since I got my Dell Inspiron 15r a few months ago I've been getting random blue screens of death, about every 1-2 weeks.
I've tried using Google to find a solution but I can't seem to find the right one for my situation, so I came here.
They do NOT happen when I boot up the computer. Usually it's when I close the display, I'll leave it on and later find it with the blue screen.
I got BlueScreenView so I have a few details available.
It's always "DRIVER_POWER_STATE_FAILURE" and caused by ntoskrnl.exe+8207a
But I don't really have any idea what that means. Please help?

A:Random BSOD's "driver power state failure"

Let's collect some more information: I'll have a look at it and help you try to resolve the problem. Please follow the instructions: BSOD Posting Instructions: Windows 7 - Vista(Note: When you run BSOD_Windows7_Vista_v2.64_jcgriff2_.exe, it will also run autoruns.exe ... and both need to be in the same location!)... with one exception in the following line:"4. Zip up the entire output folder + PERFMON and attach the zip file to your next post."The BC forums will allow a total attachment size of only 512 kb (and what you need to attach will exceed this limit). Please upload the zip file to a file sharing website of your choice and and post a link to it in this thread so that we can access your uploaded zip file. I will have a look at the contained information and see if I can shed some light on your BSOD issue.See the suggestions in the following links for recommendations on file sharing websites:http://lifehacker.com/388284/best-online-file-sharing-serviceshttp://www.hongkiat.com/blog/15-great-free-online-file-sharing-alternatives/http://www.smashingapps.com/2008/08/28/5-best-free-file-hosting-services-to-store-your-files.html Please Publish a Snapshot using Speccy, and post a link to it in this thread.It is a convenient and accurate way of providing us with details of your computer specifications. Please download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:
List Installed ProgramsClick Go.
When the scan is finis... Read more

Read other 2 answers
RELEVANCY SCORE 66

Hi:

I have upgraded my ThinkPad X201i from WIN7 to WIN8.1 serveral weeks ago. After installed all drivers and APPs, it went into randomly BSOD almost each time I power on. Here is the diagnostic file from the laptop. Appreciate to have your professional suggestions, thanks.

Lisoft

A:Lenovo X201i Laptop BSOD in random

Eset and VPN software are the causes. Please remove them. Update drivers in red. How do I uninstall or reinstall ESET Smart Security/ESET NOD32 Antivirus? - ESET Knowledgebase


Code:
HECIx64.sys Thu Sep 17 21:54:16 2009 (4AB293E8)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

CHDRT64.sys Thu Aug 26 10:45:24 2010 (4C7629A4)
Conexant High Definition SmartAudio
http://www.carrona.org/drivers/driver.php?id=CHDRT64.sys

5U877.sys Mon May 23 08:33:31 2011 (4DD9FFBB)
5U877 UVC driver for Ricoh camera
http://www.carrona.org/drivers/driver.php?id=5U877.sys

igdkmd64.sys Tue Nov 27 01:26:05 2012 (50B4089D)
Intel Graphics driver
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys

Netwsw00.sys Tue Feb 5 20:00:21 2013 (511156C5)
Intel? Wireless WiFi Link Adapter
http://www.carrona.org/drivers/driver.php?id=Netwsw00.sys

e1i63x64.sys Wed Mar 20 08:37:29 2013 (51496739)
Intel(R) Gigabit Adapter
http://www.carrona.org/drivers/driver.php?id=e1i63x64.sys

SynTP.sys Thu Apr 18 05:55:17 2013 (516F6EA5)
Synaptic Touch Pad Driver
http://www.carrona.org/drivers/driver.php?id=SynTP.sys

Smb_driver_Intel.sys Thu Apr 18 05:56:57 2013 (516F6F09)

Smb_driver_Intel.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driv... Read more

Read other 4 answers
RELEVANCY SCORE 66

Hello,

I have been having a BSOD issue for a couple months now. Occasionaly, I will be either having the computer remain idle or be working on it for some time. After a while, my computer begins to lock up and shortly after, a BSOD occurs with the error DRIVER_STATE_POWER_FAILURE. Any help would be greatly appreciated.

Thank you very much.

A:BSOD Driver State Power Failure at Random Occurences

Hi,

I have a similar problem (DRIVER_STATE_POWER_FAILURE).
I attach my log without opening a new post. Please just look at 2015's crashes.

I hope in your support! It is becoming very destructive for my work.

Thanks in advance.
Gian.

Read other 1 answers
RELEVANCY SCORE 66

Who crashed tells me this:

From Memory.DMP:
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A332060, 0xFFFFF80000B9C518, 0xFFFFFA800E69CCC0)
Error: DRIVER_POWER_STATE_FAILURE

From Mini Dump
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC80)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A332060, 0xFFFFF80000B9C518, 0xFFFFFA800E69CCC0)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe


Can you guys help me narrow it down from my dump files what could be causing this? A lot of times I just come back to the computer and see that it recovered from a serious error. Other times Ive just been doing nothing more than web browser.

I used driver genius to keep all my drivers up to date. Thanks for the help.

A:[SOLVED] Random BSOD - Driver Power State Failure

Hi -

Update Marvell Yukon Ethernet driver -

Code:
yk62x64.sys Thu Sep 08 03:34:54 2011 (4E68701E)
http://sysnative.com/drivers/driver.php?id=yk62x64.sys


You are overclocked -

Code:
Expected Frequency: 3070
Actual Frequency: 3800
Overclock Ratio: 1.23
O/C may be contributing to BSODs.

Regards. . .

jcgriff2

`


Code:

Opened log file 'C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\050412-7222-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?00000000`00000000?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`021cfc32?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`0023cc32?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*a:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17790.amd64fre.win7sp1_gdr.120305-1505
Machine Name:
Kernel base = 0xfffff800`03009000 PsLoadedModuleList = 0xfffff800`0324d650
Debug session time: Fri May 4 02:01:17.215 2012 (UTC - 4:00) ... Read more

Read other 2 answers
RELEVANCY SCORE 66

Somewhat recently i moved my laptop from school to home and suddenly the laptop went from perfect *or close enough* working conditions to having a multitude of problems from being unable to boot for a while, randomly restarting as if someone just pulled the plug, and this particular BSOD that seems to occur randomly seemingly unrelated to whether or not i'm doing anything. I haven't figured out the cause of the first two problems although the inability to boot went away at random, i'm considering the possibility that this BSOD and the other two issues are possibly related.

A:Random driver power state failure 0x0000009f bsod.

bump

Read other 1 answers
RELEVANCY SCORE 66

I am getting BSO with DRiver Power State Failure, and there is no consistent trigger that is doing this.

I am an audio engineer, and I rely on my machine to work, so that I can pay my bills. The last 2 months have been a headache, as I have not been able to reliably do any type of work. I am looking at building a new machine, but until then, I need something a little more reliable.

The BSOD happened about 15 minutes ago, and I had copied the dump log, but when I was registering, I got another BSOD, erasing the Dump log. I expected to find another dump log when I signed in, but there was none there.

I am looking to have this issue solved, if anyone is up to the challenge.

I realize the info provided is bare, but perhaps someone could guide me as to what type of info you need to see what is going on.

I'm an audio engineer, Luthier, and hobby electrical "engineer", not a programmer, so any help would be appreciated.

I would also be willing to provide some audio work as a form of payment, to show my gratitude.

Thanks to all who give attention to this matter.

Regards,

A:Driver Power State Failure BSOD, Consistently, but random.

It just happened again,

Here is what I got ...

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80075A4060
BCP3: FFFFF80000B9A518
BCP4: FFFFFA8008B1C7F0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\103014-19687-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-56675-0.sysdata.xml

---------------------------------------------------------------------------------------------------

Happened again as I turned on my machine, went to make coffee, came back, and after clicking on my browser button (non responsive) the BSOD came back up. I copied the info to see if there were any differences, and there were.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80076B6060
BCP3: FFFFF80004DDC518
BCP4: FFFFFA80095BE010
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\103114-19734-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-61635-0.sysdata.xml

----------------------------------------------------------------------------------------------------

Here is another BSOD blue scr... Read more

Read other 1 answers
RELEVANCY SCORE 66

Dell Studio T6500
Vista x64 sp1
original OS, re-installed few days prior
OEM
Hardware 1 Year
Re-installed (updated from disk) few days ago and started having problem
intel core 2 duo
i think the video card is Mobile Intel 4 Series Express Chipset Family (?)
not sure about the motherboard
Dell power supply,

Getting random crashes, sometimes a few mins apart, sometimes hours, with BSOD reading Driver Power State Failure. At first I had a problem with explorer not loading on startup. Had to run programs through task manager. then updated windows from the original CD, restoring the files and bringing back explorer. It was then that it started crashing. any help would be greatly appreciated.

A:Crashing at random, BSOD Driver Power State Failure

Hi,

All Driver Power State Failure errors.

They all blame the disk controller, and a driver usually seen in Firewire/USB BSODs.

Therefore your external drives (or more likely programs that access them) are at fault.

Number one on the list are the Norton remnants that are still being loaded on the system (probably from the "free trial" that comes preloaded on most OEM systems).

Remove these remnants of Norton:

Quote:




Download the Norton Removal Tool (NRT); save to desktop. Boot into SAFEMODE - NO Networking. Tap F8 key during boot-up. Then go to desktop, RIGHT-click on the NRT icon and select Run as Administrator.

When complete - re-boot.

NRT - ftp://ftp.symantec.com/public/englis...moval_Tool.exe




If that fails to stop the BSODs then get rid of AVG too

Quote:




Download the AVG Removal Tool (ART) from here (make sure you get the appropriate version) -> save to desktop.

Boot into SAFEMODE - NO Networking. Then follow instructions to remove.

When complete - re-boot.

Install MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

Then reset the Windows Firewall to its default settings -
START -> type cmd.exe -> right-click -> run as administrator -> type netsh advfirewall reset press enter




While you are at it you really should update to SP2 as it contains many crucial security
updates that you don't have otherwise ... Read more

Read other 1 answers
RELEVANCY SCORE 65.6

I've been getting these BSOD's very occasionally over the past few months. Computer can always do full reboot in normal boot mode without problems. I don't think it has ever happened more than once in a day and I typically have gone a couple of weeks between crashes. They typically happen without me being at the computer, although once or twice have occurred when I was on the keyboard. Don't know what else to put, but would appreciate any help.

A:BSOD Driver Power State Failure pretty random and sporadic

Hiya and welcome to SevenForums!

Code:
BugCheck 9F, {3, fffffa8010c39a00, fffff80000b9a3d8, fffffa800d2c7600}

*** WARNING: Unable to verify timestamp for LEqdUsb.Sys
*** ERROR: Module load completed but symbols could not be loaded for LEqdUsb.Sys
Probably caused by : LEqdUsb.Sys

Followup: MachineOwner

Code:
LEqdUsb Logitech SetPoint Unif Logitech SetPoint Unif Kernel Manual Running OK TRUE FALSE 28,672 32,768 0 5/23/2013 1:09:50 AM C:\Windows\system32\DRIVERS\LEqdUsb.Sys 4,096
This is your Logitech SetPoint Unifying KMDF USB Filer Driver. It hasen't been updated since 5/23/2013. Update it.

Read other 1 answers
RELEVANCY SCORE 65.6

Random system restarts/BSOD. Sometimes it happens while the computer is in sleep mode, sometimes it's while I'm actively using it, sometimes I'll just be reading something on the screen and the system is suddenly restarting. This has been happening for years now but has recently gotten worse.

A:BSOD at random times. Recently driver power state failure

Hi,

Try running the Hardware Diagnostics on your computer. If you get any error code, make a note of the error code.

Did you try doing System Restore? If no and if this issue started occurring after doing some recent software changes on your computer, then I would suggest try restoring your system back to a date when it was working fine. System Restore will affect Windows system files, programs, and registry settings only.

For System Restore steps, you can refer to the URL mentioned: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

Read other 9 answers
RELEVANCY SCORE 65.6

Can't seem to shake this Driver Power State Failure BSOD. Happens almost daily.
I am currently running ArcGIS which is a huge pig on resources but the BSOD is not exclusively occurring when I run it.
Thanks in advance for the help/insight.

Read other answers
RELEVANCY SCORE 65.6

Hi

XPS L502x : 2nd generation Intel Core i7-2720QM processor 2.20 GHz with Turbo Boost
2.0 up to 3.30 GH
8Gb Ram
Windows 7 64 bit

Have been having repeated BSODs lately. Used to get them about once or twice a week but its now a few times a day that it happens.

Have attached the zip file made by the download from this site and will paste the WhoCrashed Report below.

I have tried numerous fixes and nothing has worked...getting desperate.

Thanks in advance guys


System Information (local)
--------------------------------------------------------------------------------

computer name: LAUCHLANMAC
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 8499937280 total
VM: 2147352576, free: 1943908352



--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.


On Sun 3/4/2012 4:14:17 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\030412-14710-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800D8BC4F0, 0xFFFFF80000B9C3D8, 0xFFFFFA800BDDA010)
Error: DRIVER_POWER_STATE_FAILURE
file path: C... Read more

A:Random BSOD : ntoskrnl.exe (nt+0x7CC40) Driver Power State Failure

These were Related to Mbm3DevMt.sys F3607gw Mobile Broadband Device Management Driver from MCCI Corporation.

I would re-install the newest driver available.
The same is true for wwanussf.sys F3607gw Mobile Broadband Module from Ericsson AB

Why 2 Broadband drivers?

Read other 6 answers
RELEVANCY SCORE 65.2

Over the last few weeks, I seem to be getting the BSOD frequently. Probably averaging at least once per day. Almost always, this occurs within 15 minutes of taking my laptop (Lenovo Thinkpad E530) off AC power and using battery power. Note that I'm usually watching a video and maybe have a few tabs open when this happens, so I'm not doing memory-intensive things and I don't think the laptop is being overheated or something. After the BSOD, I can usually reboot quickly and then get back and running smoothly, even if I just remain on battery power. Though it has happened where I got the BSOD consecutively.

Here is the error report I receive from Windows when I reboot:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: fe
BCP1: 0000000000000008
BCP2: 0000000000000006
BCP3: 0000000000000005
BCP4: FFFFFA8005E727A0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\120915-10623-01.dmp
C:\Users\ron\AppData\Local\Temp\WER-26005-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

When this report comes up, I click on "Check for a solution" but this doesn't seem to do anything. The window just disappears... Read more

A:BSOD when laptop on battery power. Win 7, Lenovo E530, SSD

As per forum rules we DO NOT assist with pirated operating systems.

Requesting Mod to close thread...
 

Read other 2 answers
RELEVANCY SCORE 64.8

Battery Issue - Lenovo V570 (Laptop) - Battery Model L09S6Y02

First off I for the most part do not use the battery. It is normally detached from the laptop. I only attach it to periodically charge it and test prior existing charges' performance.

O.K. here is the problem. I attach battery attachment, computer does not make it to the window screen more often than not. When it does, it freezes at the please wait loading screen.

I rarely use the battery at all, but I want all my equipment up and functional. It's life should still be good for I periodically recharge it. I think since I've had the laptop I've only recharged it a total of 6 or 7 times and that's been a year or so.
 

A:Battery Issue - Lenovo V570 (Laptop) - Battery Model L09S6Y02

jonasdatum said:


Battery Issue - Lenovo V570 (Laptop) - Battery Model L09S6Y02

O.K. here is the problem. I attach battery attachment, computer does not make it to the window screen more often than not. When it does, it freezes at the please wait loading screen.

I rarely use the battery at all, but I want all my equipment up and functional. It's life should still be good for I periodically recharge it. I think since I've had the laptop I've only recharged it a total of 6 or 7 times and that's been a year or so.Click to expand...

I, for the moment at least have the battery working power adapter attached. What did I do? I uninstalled Avast (freeware version) ?

I learned from prior experience that running two of any system utility software can cause problems, but it normally restricts itself to what it is protecting. Then I remembered: "If you remove the possible whatever is left however in probable must be the truth."

Next phase of testing is test the battery on it's own.
 

Read other 2 answers
RELEVANCY SCORE 64.8

Hello and thanks for letting me post on this awesome forum!!!!

I am fixing a family members computer and it has stumped me. I have tried everything that I can find online related to my problem outside of reinstalling but I think it could be a hardware (power or memory) issue from what i read and a reinstall wouldnt fix it.

Driver_Power_State_Failure

I cannot trigger the BSoD of cue. Ive tried quite a bit, bringing it back from sleep, full load, no load, Skyrim, and different video cards.

I have been using Bluescreenviewer / myeventviewer to give me some incite but I couldn't find anything that would help my particular problem. So i present it to the people that know more then me, the online community. I followed the BSoD posting rules but let me know. Ill be checking back frequently.

Thanks again.

PS this computer is having raid issues. I get "Degraded NVIDIA mirror 931.51G" red flashing error for a couple seconds during boot. I dont know if this is related but BSoD's did not start at exactly the same time, but quite a bit of time after, I am told.

A:Random BSoD, Driver Power State Failure, reports blame ntoskrnl.exe

A few issues

1-asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).


2-These were all related to your NVIDIA nForce RAID Driver. Yours is from 2006. Update to current of remove.

3-Old drivers

Code:
ASACPI.sys 3/27/2005 10:30:36 PM
nvrd64.sys 11/10/2006 4:18:39 PM
SiWinAcc.sys 6/14/2007 8:02:02 PM
SiRemFil.sys 6/20/2007 3:42:10 PM
SI3132.sys 10/3/2007 2:39:29 PM
dump_nvstor64.sys 1/25/2008 11:01:22 PM
nvstor64.sys 1/25/2008 11:01:22 PM
nvm62x64.sys 10/17/2008 5:01:06 PM
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of De... Read more

Read other 3 answers
RELEVANCY SCORE 63.2

Just got a dell inspiron running vista home premium 64. works fine, except each morning the power button is blinking blue and unit has to be unplugged- mouse does not wake it, pressing power button kicks all the cooling fans into high gear, but nothing more. i suspect that this happens when unit goes into sleep or hibernate mode. under 'power plan', "dell recommended" is checked.

ideas?

thank-you for any expert advice that you can offer

A:Dell- blinking power button- vista power mgmt?

Is it a desktop or Laptop?

Dell desktops are well known to have dodgy power units (hardware) installed.

Have you tried a cold reboot to see what happens?.....If you continue to have power issues call the Dell customer support and they'll send you a new power supply (for desktop).

Not sure about the laptops though.

Read other 1 answers
RELEVANCY SCORE 63.2

Hello,

I've done a lot of searches using variations of the above title and came up empty or just plain missed the answer.

I'd like to know, if it is not asking too much, the following points:

1. What exactly is the function of Link State Power Management in the Power Options Advanced Settings, PCI Express?

2. What are the implications of using the options available:

a) Off.
b) Maximum power savings.
c) Moderate power savings.
d) Which option is the best selection for my Dell laptop.

I'd appreciate a feedback on these points.

Thank You for Your time and patience.

A:Power option PCI express Link State Power Mgmt

The function of that power management feature is to manage the power consumed by your PCI devices. PCI components require constant streaming of data when in use so configuring power management to shut them down, or reduce the data stream, when not in use can save some power, which really only has a substantial effect in laptop power savings. The wireless card is usually a PCI component in a laptop, so configuring it for maximum power savings might shut it off when it's not in immediate use. This might introduce some lag into your wireless connection upon first use of the wireless or even during use (if the system decides to shut it down between connections). It's hard to say what impact it will have for you. If you're not extremely worried about getting that extra small fraction of life out of your laptop, I'd leave it alone and configure it not to use power management (keep them on all the time). Otherwise, you can try out the different settings and see if you notice a difference.

Read other 3 answers
RELEVANCY SCORE 62.8

Hello,
I am new. I cannot access my minidump folder because I do not have access and cannot find out how to get access, otherwise I'd post it up.

I am trying to download new chipset drivers from gateway and I am sitting at 0% the download will not start.

The laptop is new roughly 3 months old. I am running Vista 64 on a Gateway P-7800. I've BSoD'd probably 15 times in the last week or so. Please help. Thanks.

A:New Laptop BSoD Power State Driver Failure

Follow the instructions here: http://www.techsupportforum.com/1871981-post2.html

It will provide us with the minidumps and more information about your system.

Read other 11 answers
RELEVANCY SCORE 62.8

From day one when I opened up this laptop it was crashing. I've had the RAM replaced, the SSD (twice), factory reset, MOBO replaced, and still the same intermittent crashing. The company I bought this from "tried" to fix it but couldn't ever get anywhere. This has been a 2 year P.I.T.A. for me and I'm finally coming to you guys because the company I bought this from has informed me that my warranty is up and I will have to start paying for their "help". I thought that was comical. Nonetheless. Here I am. I need help. Not sure where to start because I've never been able to pinpoint the cause. Most of the time the BSOD reads "Driver State Power Failure". I've personally updated all of my drivers, chipset, BIOS, graphics card, etc. The vendor has also done the same. To no avail.

Let me know what I can do to help someone diagnose this for me.


Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 16273 Mb
Graphics Card: NVIDIA GeForce GTX 960M, -2048 Mb
Hard Drives: C: 110 GB (31 GB Free); D: 1863 GB (1381 GB Free);
Motherboard: ASUSTeK COMPUTER INC., G551JW
Antivirus: Windows Defender, Enabled and Updated
 

A:New Laptop - BSOD - Driver Power State Failure

It sounds like you have an ASUS ROG G551JW laptop which originally came with Windows 10 Home 64-bit.
You say you bought it new and had problems with it the very first day of use, so I'm surprised you didn't return it for another one instead of having hardware replaced in it for the past 2 years.

There are several links here that you can read about "driver power state failure" in Windows 10.
https://www.google.com/?gws_rd=ssl#q=driver+power+state+failure+windows+10&spf=1498270496270

----------------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 62

Good day everyone. I see I am not the only one having issues with this. Thank you for taking a moment to help me with this.


I recently installed the Western Digital Black Dual Drive. Consists of a 120GB SSD where my Windows 7 64 bit OS resides and a 1TB HDD where my personal files and programs reside. I installed Windows 7 from the Windows CD as Windows would not load due to a "hardware" change. I then used the HP recovery CDs to bring in all my drivers.

I have my power setting set to custom. Basically setup when plugged in to never hibernate and/or goto sleep.

After a short time I experienced a blue screen when I close my laptop lid. Seems the display is shutting off even though I've set it not to do that.

Pc was acting very sluggish after opening the lid, so I tried to re-boot. My laptop got hung up on the powering down screen for 10-15 minutes and finally BSOD. - driver power state failure

I've updated the firmware for the WD Drive and also updated the Bios for my HP laptop.

I've attached the zip file per the instruction in your BSOD instructions post. Hopefully I've followed everything I need to do for assistance.

Thank you in advance!

-Paul,

A:BSOD after closing laptop lid - driver power state failur

Hi there Pauliwood ,
I am sorry for the difficulties you're experiencing. I'll be glad to help you, but can you give me a little bit more info on what is happening when you try to start your laptop now.
As I understood you did the following: a clean install of Windows 7 on the SSD, then unlocked the HDD partition and transferred your files on it? After a short while you experienced BSOD and got driver power state failure?

About the error code: It looks like there is a drivers issue, although it is known that antivirus programs can also cause it. However, possible causes are also a loose card or cable, even a weak power supply.
Basically, the error you're seeing means a driver is not handling the power state properly.

Are you able to access Windows at all now?
If you're able to do so, please check in Control Panel – Device Manager to be sure major drivers are not shut off during sleep - double click Display Adapter – NIC and WIFI - Sound and others - Power Management tab – uncheck. Allow computer to turn off power.
Maybe only one driver has an issue.
Start - type in Search box - MSCONFIG find at top - Right Click - RUN AS ADMIN
General Tab - check Diagnostic Start - APPLY / OK - REBOOT

Try it now. If it still blue screens, think Video Driver. If not, think NIC, Wifi, Sound etc. (and it still could be video interacting with something else).

A possible solution would be to update the main drivers. May be you'd better do that manually, consulting the ... Read more

Read other 3 answers
RELEVANCY SCORE 62

Hello, just got this BSOD for the first time upon system shut down. Never seen it before, and I always shut down my laptop using the prompt in the windows orb. My system specs are in my profile.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105
Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8004A38060
BCP3: FFFFF80000B9C3D8
BCP4: FFFFFA800F116350
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\111412-18314-01.dmp
C:\Users\Ryland\AppData\Local\Temp\WER-66893-0.sysdata.xml

A:Driver Power State Error BSOD on laptop shutdown

Hello again.

Caused by older Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC drivers.

Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; Realtek. (Restart the system)

Delete remnants of its drivers/older drivers using Driver Fusion/Sweeper (Restart if required)

Download and install a fresh copy from: Driver Reference Table


Code:
0: kd> !irp fffffa800f116350
Irp is active with 4 stacks 3 is current (= 0xfffffa800f1164b0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 3] 0 e1 fffffa800720e050 00000000 fffff8000310f200-fffffa800efe5a80 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
\Driver\RTL8167 nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000006
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800efe5a80

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm Rt64win7
start end module name
fffff880`0637... Read more

Read other 5 answers
RELEVANCY SCORE 62

This error has been happening for 80% of the time when my laptop is shutting down or restarting. It started few days ago when I removed everything and reinstalled windows. I then refreshed my laptop couple of times but the problem is still persisted. I updated windows and all devices are up to date. Restarts are also slow when it does restart properly.

When I tried updating to windows 8.1, it would stop at "setting up 82%" and had to hold the power button to turn off the laptop couple times.

Dump file: https://www.dropbox.com/s/jdivgtmu3a...37-01.dmp?dl=0

ASUS laptop
Disk Drives: TOSHIBA MQ01ABD100
DVD/CD-ROM drives: HL-DT-ST DVDRAM GU71N
i7 3537U
8 GB DDR3
Nvidia Geforce 740M

A:BSOD - Driver Power State Failure when laptop shuts down

Please read BSOD Posting Instructions

Read other 2 answers
RELEVANCY SCORE 62

Dear forummers,

Recently, I've been heving some BSOD'S wen putting my GE70-i550M287FD to sleep mode or hibernation. The NB just stays just active with a black screen for a while, only to end up in a BSOD eventually.
It gives me always the same BSOD, so I figured it would be caused by a single error. However, I haven't been able to detect and fix it up until now. I hoped that some of you might have dealt with it before or know how to deal with it.

The only hardware I've got plugged is the mouse. I have't been able to test if I got the same error without the mouse plugged. Also, this BSOD ONLY occures when going into hibernation/sleep mode.

This is a photo from the BSOD I keep getting once a week/2 weeks or so.

IMG_20140212_213442_zpse94cdbb9.jpg Photo by esmorax | Photobucket

I have read something about minidump files. How do I open them and do they contain any necessary information needed to fix this error?

Thank you in advance!

esmorax

A:MSI GE70 Driver-Power-State-Failure BSOD help :( (Laptop)

Hello Esmorax, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 8 answers
RELEVANCY SCORE 62

I've read around a bit but nothing seems to be fixing my problem. My battery on my laptop died a few months back. I got the battery replaced last month and ever since I've been experiencing the BSOD for power driver failure once or twice a day. It rarely occurs while the laptop is in use. It's only when I open the laptop to restore it from sleep that I find it has crashed. Any help will be greatly appreciated. Thanks!

A:BSOD After Replacing Battery on Laptop, Power Driver Failure

Hello and welcome to Seven Forums.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

Have you reported this issue to the place you got the battery replaced from?


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80080b0060, fffff80004fb53d8, fffffa800fa97950}

Probably caused b... Read more

Read other 9 answers
RELEVANCY SCORE 61.2

Hi,

I'm getting frequent random BSOD Power_Driver_State_Failure on my ASUS G551JM Laptop (https://asus.com/support/Download/3/...RbVetG02i5/41/) It happens while plugged in and running off battery but more frequently on battery power. It usually happens within 30 minutes of powering on the laptop or waking it up from sleep/hibernate. It primarily happens after logging into windows but on rare occasion will blue screen prior.

I've updated drivers from Asus and chipset manufacturers websites: intel rapid storage driver, Intel MEI driver, Intel INF driver, Intel wifi and bluetooth drivers, clean installed nvidia gtx 860m drivers. I tried to update intel HD graphics drivers but got this error message:
Computer Manufacturer Graphics Driver Detected. Your computer manufacturer customizes the drivers that run Intel components on your machine. You might lose functions and cause other technical issues by installing the Intel drivers.
Windows updates are up-to-date and no virus or malware.

Please help,
Thank You.

DM Log collector Tool LOST-Wed_08_03_2016_190523_80.zip

A:ASUS Laptop Constant BSOD Power Driver State Failure

Hi rapidvodka,

I would recommend to install the Nvidia drivers from ASUS

Code:
2: kd> !irp
Irp is active with 0 stacks 0 is current (= 0xffffe001e81748c0)
Mdl=ffffd0006f0853c8: No System Buffer: Thread ffffd0006f085458: Irp stack trace.
cmd flg cl Device File Completion-Context
2: kd> !irp ffffe001`ed49d010
Irp is active with 6 stacks 4 is current (= 0xffffe001ed49d1b8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe001e9fb3540 00000000 fffff80103cfe590-ffffd0006a7eb8f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe001ed481040 00000000 fffff80352fa875c-ffffe001ef323f08 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for n... Read more

Read other 3 answers
RELEVANCY SCORE 60.8

Hi, i've had this Asus for about 2 months now and i've experienced 3 BSOD's. They are random and i almost kinda think they happen if i leave the laptop on for a long time, like say; a couple days, but i'm not quite certain.

System Specs:
Model - Asus N53sv
Windows 7 Home Premium X64
Intel i7 2670QM (4 cores)(Hyper-threaded)
NVIDIA GeForce GT 540m Graphics Card/ Driver Date: 20110306
HL-DT-ST DVDRAM
Atheros AR9002WB-1NG Wireless Network Adapter
Realtek PCIe GBE Family Controller
Realtek HD Audio

Also, to note, the first ever bluscreen reported something bout a DRIVER POWER STATE FAILURE or something similar... The last 2 however have been BUGCODE DRIVER ERROR BSOD's

I've attached the dumpfiles in a zip file... Please i need your help and im woried, because its a new computer and i don't know what could be causing it.
Oh i also have dameon tools installed, and a program called motionjoy that helps me to emulate game controllers on my system when i plug in a gamepad.... I did research on the motionjoy program, and the error that it gives if your pc crashes from it is different from mine so i doubt its that. Please help , the computer is barlely 2 months old

Attachment 193053

A:BSOD Help.RANDOM BUGCODE DRIVER ERRORS Asus N53SV - EH71 Laptop

  
Quote: Originally Posted by Fro5t


Hi, i've had this Asus for about 2 months now and i've experienced 3 BSOD's. They are random and i almost kinda think they happen if i leave the laptop on for a long time, like say; a couple days, but i'm not quite certain.

System Specs:
Model - Asus N53sv
Windows 7 Home Premium X64
Intel i7 2670QM (4 cores)(Hyper-threaded)
NVIDIA GeForce GT 540m Graphics Card/ Driver Date: 20110306
HL-DT-ST DVDRAM
Atheros AR9002WB-1NG Wireless Network Adapter
Realtek PCIe GBE Family Controller
Realtek HD Audio

Also, to note, the first ever bluscreen reported something bout a DRIVER POWER STATE FAILURE or something similar... The last 2 however have been BUGCODE DRIVER ERROR BSOD's

I've attached the dumpfiles in a zip file... Please i need your help and im woried, because its a new computer and i don't know what could be causing it.
Oh i also have dameon tools installed, and a program called motionjoy that helps me to emulate game controllers on my system when i plug in a gamepad.... I did research on the motionjoy program, and the error that it gives if your pc crashes from it is different from mine so i doubt its that. Please help , the computer is barlely 2 months old

Attachment 193053


The issue is USBHUB.sys. Thats an OS file that is timing out waiting for a USB device to respond.

Some other things of note

Related to atkwmiacpi64.sys ATK WMIACPI Utility from ASUS. I would remove it.

Related to AS... Read more

Read other 5 answers
RELEVANCY SCORE 60.8

Hi, I tried to install the Lenovo Power Management driver on my Lenovo B590, after instal and restart is nothing happens. I can't start the application, is not appear anything. What is the problem? my OS is Windows 7 Ultimate x64 please help! Thx and sorry for my bad english

A:Lenovo B590 Lenovo Power Management driver no work

hi Reichtofer,
 
Thanks for Posting!
 
Try opening Control Panel / Uninstall a program and uninstall the Lenovo Energy Management / Power Management Software,
   Restart the system if prompted.
 
 
Now download and install this
     Lenovo Power Management Driver  
 
If  after the installation you were able to see a shortcut icon on your desktop,
    try navigating Crogram Files or Program Files x86 
            now look for Lenovo Folder and It shouldbe located there.
 
Hope this helps
Cheers!





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 60.4

I have power management set up to shut off my monitor after 15 minutes... problem is, it never shuts off, most of the time.... some times it does. There is nothing going on in the background that I can tell that would keep it from shutting off??? Any suggestions??
T
 

A:Power Mgmt

Read other 9 answers
RELEVANCY SCORE 60.4

Hello All - I'm suspicious that the IT guy I hired is snooping, but I'm not savvy enough to figure it out myself. On August 18, 2016, I can see (in my Event Viewer) where isaAgent began logging activity/info (and I think passing it on to a server). I've seen the word "packet" a lot of times when digging through the programs I believe are suspicious. On the same day and time as isaAgent began logging, I can see where Intel Management Engine Components, Intel Rapid Storage Technology, Intel Serial IO, Intel Virtual Buttons, Realtek Card Reader, Intel Graphics Driver and Dolby Audio X2 Windows API SDK were all installed on my computer.

Is it possible that my activity (browser, keystrokes, screen captures, voice, camera, etc...) has been compromised and that he is logging/snooping on my laptop? This guy is wicked smart and one of the most talented web developers (28 years old) that I have ever seen, which makes me think he wouldn't make it easy for me to catch on to him. I just don't know where to look and what these programs "actually" do. I do know that they are logging and monitoring tools, but I'm not sure to what extent or if there is something (program/indicator)I should look for that would tell me that I am right or wrong for being concerned.

Does anyone have any feedback or guidance on the above? I would really like to be proven wrong, but the business owner in me has to inspect what I suspect.
 

Read other answers