Over 1 million tech questions and answers.

Word 2010 changes some fonts in a downloaded locked word document

Q: Word 2010 changes some fonts in a downloaded locked word document

G'day,
When I download save or display a word document which is locked some of the fonts change and this makes the documant look bad and as a result it is not paged correctly.
I am using Windows 7 and MS Office Home & Business 2010.
If I use a different computer which is XP and 2003 the document displays correctly, if I copy this to the Windows 7 PC the document font is changed.
The lock document is a form which has been locked for easy completion.

Any assistance would be appreciated.

Nyquest

RELEVANCY SCORE 200
Preferred Solution: Word 2010 changes some fonts in a downloaded locked word document

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Word 2010 changes some fonts in a downloaded locked word document

Found the problem, Windows7 and or MS Office Home & Business 2010 is missing the particular font the document wanted, it was Arial Narrow, once this font was added to the windows/font folder, the document opened correctly.

Read other 1 answers
RELEVANCY SCORE 118

This is for a friend so I don't have access to the computer yet. She downloaded a word document from her hotmail by clicking on download then open instead of save. She was working on the file and then she stated she went to File > Save. She did not get prompted to save the file in a different location (that usually happens on other Office versions).

She went back to Word but cannot locate the file in her open section or the recent document list. She is on Windows 7 so I finally found the temp folder for her computer but could not locate the temporary file that would have been saved.

Is there any other locations other than the temp folder and the default folders that the file could have been saved? Personally I don't think it saved at all.

Thanks for any assistance
 

A:MS Word 2010 / Downloaded document

Read other 6 answers
RELEVANCY SCORE 96

If I try to print a document in any font except Times New Roman in a word document my computer will lock up.The information never gets to the printer. I have up-dated my printer and don't think it is the problem since my printer will print anything I create in PrintArtist. I was hoping there is a setting somewhere I need to check to allow word to print any font I choose. I just tried to print a flier useing Wordart and I created and it would not print. I took it to where I work and a printer older than mine printed it out just fine. I have a Deskjet 932C printer and have Word 2000. Any help with this matter would be appreciated.
 

A:Trouble with Fonts in Word Document

Read other 12 answers
RELEVANCY SCORE 94

After upgrading from wins 8.1 to wins 10, I found that the MS Works 9 program was not recognizing word files that I downloaded from email.   When I open the file, i receive a message that explaines how I should purchase a Microsoft Office program.  I deleted the existing Works 9 program and reloaded the program from the disk that came with the program.  My computer continues to ignores the fact that Works 9 is available and directs me to purchase MS Office.  I  did not have this problem when the computer was running on Wins 8.1 Otherwise, the Works9 program works perfectely with Wins 10.   Any help would be very much appreciated.  Bill

A:MS Works9 does not recognize a downloaded word document.

Hi Worahm, I think your issue deals with the default application that opens your file type. I would recommend changing which program will open your Works 9 file. Please see Windows support page here to learn more about changing the default. If Works 9 does not show up in the list of programs to choose from, go to Choose default program, and then locate the file on your C: Drive.  Please let me know if this works. It soudns like when you upgraded, some of the defaults were lost. 




Jesyka I work on behalf of HP. #HPExpertsDayPlease click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is resolved. 

Read other 1 answers
RELEVANCY SCORE 93.2

Hello All

Win 7 Prof 32 bit
Office 2010

I've been trying to create a Task in Outlook from a Word Document that I have created on this computer. The idea is that a shortcut to the document is created as an Outlook Task. Click on the shortcut, and voila - there is the document.

The "Create Microsoft Office Task" icon DOES send the document to Outlook as a Shortcut in a Task, however, when I open the task, Outlook says:"Outlook blocked access to the following potentially unsafe attachments: Shortcut to 'document name'."

It's NOT an unsafe attachment; Outlook WILL OPEN this document if I send it as an email attachment. Outlook will open .docx files types.

This is a one person computer...no network, no sharing. And this problem has been driving me crazy. This would be a wonderful feature, if I can get it to work.

Anyone have any ideas what I (or Outlook) are doing wrong?

Thanks for your help
Barb

A:Creating a Task in Outlook 2010 from a Word 2010 Document

I think this will do the job for you:
Add & Create Outlook 2010 Tasks From Word 2010

.





Quote:
You can create a task from Word 2010 document and save it under Outlook 2010 tasks. This feature is by default concealed but you can make it apparent on Quick Access toolbar and use it directly.

In order to use this feature, you need to make this feature apparent on Word 2010 Quick Access Toolbar, head over to Quick Access Toolbar and from small drop down button click More Commands.

You will reach Word Options dialog. Hit drop-down button present beneath the Choose commands and select All Commands. Now scroll-down the list and find Create Microsoft Outlook Task command. Select it and click Add (>>) to show it on Quick Access toolbar pane. Once added, hit OK.

First save the document and then select any portion of the text in the document from which you want to create the task, from Quick Access toolbar, click Outlook task button.

Upon click, it will create Outlook task for the Word document and you will reach Outlook Task dialog where you can set Start and Due date for the task and add more information about it. Save & close the task to view it under Outlook tasks.

When opening task in Outlook 2010, you can also view the document from which it was created from, just double-click the document to open it.

Read other 4 answers
RELEVANCY SCORE 92.8

Ok here's my problem.
Since late last night, and I don't know what the hell I did. I am unable to do anything in word. If I attempt to type, I get a message at the bottom of my window that says "command is not available because the document is locked for editing". Any ideas?!?!?!?!


~ Hawaiian Prince
 

A:Word: Document is locked for Editing

You should be able to do a SAVE AS and choose a different name and then be able to open the new one.

If not, you can CRTL A and copy and paste the whole thing in a new .doc.

And I've never tried THIS but you might look into it.

- Castleheart
 

Read other 3 answers
RELEVANCY SCORE 92.8

I would like to embed FREE/Non-Licensed fonts in Excel & Word documents. How?

Thanx in advance,

Joe
 

A:Embedding Fonts in a Spreadsheet in Excel or Word Document file

Read other 6 answers
RELEVANCY SCORE 92.4

How do I change the fonts when I bring up word? So when I bring it up I want it to be in a centain fonts, color, type and so on so I don't have to change it every time I use it?

A:Word 2010 Fonts

Hello lostsoul62,






Quote:
How to change the style of the default font in Word 2010

To change the style of the default font in Word 2010, follow these steps: If you do not have a document open, create a new document that is based on the Normal template. To do this, click File, click New, click Blank Document, and then click Create.
In the Font group, click the Font flyout.
Select the options that you want to apply to the default font, such as font style and font size. If you selected specific text, the properties of the selected text are set in the dialog box.
Click Set As Default.
Select the All documents based on the Normal.dotm template? option, and then click OK.



How to set the default font in Word

More links-

Change the Default Font Size in Word - How-To Geek

Microsoft Word 2010 - Themes

Read other 1 answers
RELEVANCY SCORE 92

Hello All!

I locked myself out of my own document....is there any way that I can find the unlock code so I can open up my document again? I need this information URGENTLY!!

Thanks In Advance!
 

A:Locked Word Document...Forgotten Password!

Read other 7 answers
RELEVANCY SCORE 92

I have a user who when he opens Word documents that were originally created using one of 2 specific templates is told that they are locked and in use. If he just choses the read option he can use them as normal.

He is running Office 2007 on Vista.

This question sums it up and offers a perfectly good solution:

http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Q_22680348.html?sfQueryTermInfo=1+lock+templat+word

My problem is that he has been happily creating hundreds of documents for months and really doesn't want to do this with each one. Does anyone have any idea how to perform one big super fix that will fix all the docs?

The templates were originally created in Office 97 I believe and have been upgraded a few times.

This issue only happens with Vista and not XP running Office 2007.
 

A:Word document locked for editing by 'another user'

Read other 8 answers
RELEVANCY SCORE 92

Please help, we are renting a Dell computer from Rainbow Rental and it has all the latest bells and whistles the only problem we have is when we type a document in Microsoft word 98 and save that document and close-the next time we want to open the document we get a message saying the document is locked by another user 'Rainbow Rental' open as a read-only document or notify when document is not in use--and when we push the read-only button the window closes. Does microsoft word need to be re-installed. We also get a "normal.dot" template message as well. This is very frustrating because we have kids who do papers for school and unless they print print right then and there they can never get the document opended again. Please help us!

Thanks
 

A:Solved: microsoft word locked document

Call Rainbow and tell them their PC is a piece of junk. Actually, it's not the PC, but the software is poorly install and should have been tested.

Try Word troubleshooting, which CANNOT hurt:

www.theofficeexperts.com/word.htm
 

Read other 2 answers
RELEVANCY SCORE 90.8

Hi

I have created a form in Microsoft Word 2013 at work (not on this computer) for fellow workers to fill in, I used form fields and then locked the document so that users were restricted to only filling in the sections necessary.

The problem is that the table doesn't have enough rows, and because the form is locked, users cannot insert more rows at the bottom. They won't always need to insert more rows, but it will be common. I don't want to make the document too long, so I don't want to insert more rows as there will be no way for the user to delete the unnecessary ones.

Is there a way to just unlock the table within a locked word 2013 document?

Thank you
Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 4049 Mb
Graphics Card: AMD Radeon HD 7670M, -2048 Mb
Hard Drives: C: 920 GB (811 GB Free);
Motherboard: Intel, PLCSF8
Antivirus: Windows Defender, Disabled
 

Read other answers
RELEVANCY SCORE 90.8

I have Microsoft Basic 2003 that came with my new computer. My problem deals with Microsoft Word 2003. Yesterday, I tried to load a .doc file from a USB 'memory' stick that I had created on my work computer. It opened but when I tried to change it, it said this document is locked. When I opened this file, about 2 other docs were open so I ended up having to close Word. Today I came back and opened MS Word to write a new document but it gives me an error saying 'This modification is not allowed because this document is locked'. This is on the screen with a blank new document. I think that the files mentioned above are re-opened when I start Word. What do you think is a suitable fix? Thanks for the help in advance!
 

A:Solved: MS Word Locked Document and resulting problems

If all new and existing documents are locked for editing, then it's probably because you have not activated your Word/Office software, or because you have an expired trial version of Office 2003. What happens if you start Word and click on Help | Activate Product? If you are already activated, a dialog box saying so will appear. If you are not activated, the Activation Wizard will start. If you have an expired trial version, a dialog box will prompt you to enter a valid product key or purchase a key online.
 

Read other 2 answers
RELEVANCY SCORE 89.2

Is there a mechanism in Word 2010 (and also Excel, perhaps) which allows me to DELETE the document I'm currently viewing?

I'd imagine it would be under the "File" menu if it existed, but I've not found it so far.

An example of its use: I prepared a document of things to take to a reunion. My PC was still on when I got home, displaying the list (which I'd saved, as I went along). I didn't know what I'd called the document, and I wasn't certain where I'd filed it, but I know I wanted to delete it.

A:How to delete the current document in Word 2010?

Of course you can't delete open files!
But you can hover over file->open to see the last files you opened. Open the one you want. Do a fake "save as" to see the folder it's in.

Now you know the file name and location, so delete it in windows file explorer

Read other 3 answers
RELEVANCY SCORE 89.2

I work at a small accounting firm and earlier this year we purchased some new laptops which run 64 bit Windows 7. Since then, we have started to upgrade Office on our computers. On one of the Windows 7 computers, I installed Office 2010 last week. We also use CCH's program ProSystem fx Engagement. Now, when opening Word inside of Engagement (not sure if this happens outside of Engagement because the user can't recall it happening) an error occasionally comes up which says "error creating obj document." The user hits okay, which is the only option, and then receives a second error that says "obj document is nothing." She then again selects okay and moves on. It doesn't seem to cause any issues with functionality so I'm not rushing to fix it but we want to get rid of the errors and hopefully have an idea of how to correct it in the future.

Please keep in mind I'm a CPA helping with computer issues. Since we are relatively small, we don't actually have our own IT department or person. We have to go outside. I do pretty well keeping my home computer up and running if I can research the issue and find a solution. I've looked for a while and can't find a solution in a dumbed down language that seems to fit the issue.
 

Read other answers
RELEVANCY SCORE 88.4

I bought a new HP desktop computer about a month ago and upgraded Windows 7 Home Premium to Windows 7 Professional. I also installed Office 2010. All was running just fine but a few days ago when I tried to open a Word document, the splash screen would display but the document wouldn't open. When I run the mouse over the task bar for Word, I can see the correct document or at least a small version of it. However, clicking on it won't display the document so that I can edit it. I searched for normal.dot but couldn't find it. I was able to open the document with winword /safe but I don't want to have to continue doing that. Does anyone have any ideas?
Thanks.
 

A:Solved: Word 2010 won't display open document

With the Word document open, hold down the shift key, and right-click it in the taskbar. Click Move. Press an arrow key on the keyboard. See it now?
 

Read other 3 answers
RELEVANCY SCORE 88.4

When inserting pictures into a Word 2010 document they always go to the top of the page, then I have to rag them to where I want them. This happens even though I have placed the cursor in the place where I want the picture before I start the insertion process. Is it possible in Word 2010 to have the picture go directly to the indicated place? Thanks for your help on this. gbwtlc
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8098 Mb
Graphics Card: Intel(R) HD Graphics Family, -238 Mb
Hard Drives: C: Total - 941966 MB, Free - 818411 MB; D: Total - 11799 MB, Free - 1444 MB; K: Total - 953197 MB, Free - 105171 MB;
Motherboard: PEGATRON CORPORATION, 2AC2
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:positioning pictures inserted into Word 2010 document

Read other 6 answers
RELEVANCY SCORE 88.4

Hello experts, I have a word file that appears to have been corrupted. We were working on it through SharePoint and at some point the style information seems to have been corrupted. When you use the style inspector and click on a location in the text it will say the correct information. For example a level 2 heading will look and appear as a level 2 heading in the text and have the correct style attached. However, when you use the navigation pane or create a table of contents nothing is indented as it should be (level 2 is not subordinate to level 1). I have read that there are table of contents styles in Word but I don't know how to change these. Does anyone know if this would fix the issue?
 
I tried manually to 'reset' a few styles (highlight text and reclick 'level 2 header' ) which fixed the issue in that instance. However, this is a long document (150 pages) and I wouldn't want to do this for the whole document.
 
If anyone has some advice it would be greatly appreciated,​

A:Word 2010 Document Corrupt Header/TOC information

Couple things you do, first apply guide below and second make use https://www.repairtoolbox.com/wordrepair.html Word Repair Toolbox
 
Moreover you read next interesting threads about ms word-
 
http://www.instructables.com/answers/Corrupt-word-file-says-to-use-text-converter/
http://forum.codecall.net/topic/79058-when-i-attempt-to-open-a-word-document-i-get-a-error-message/
 
The first thing you must do is copy the file from the stick to the HD. Don't make matters worse by trying to work with it from the stick. There's a possibility the document is already corrupted, but the problem you describe may not really be document corruption. It may be just an annoying little glitch occasionally seen in older versions of Word, whereby letters in a line get compacted in printing:
The conventional solution is this:
In the Print dialog, switch to another printer and then back, or close Word and delete the files you find by searching for
     ~$*.*;*.tmp
Then restart Word.
If that doesn't help, then, since this is Word 2003, there are a couple of other things you can try:
In Word's Open dialog, select the file, click the arrow beside Open, and choose Open and Repair.
If that doesn't help, then change the "Files of type" setting to "Recover Text from Any File." You'll get a file with a lot of "garbage" at the beginning and end and just plain text in between, but, since I'm guessing there's not a whole lot of formatting involved in this document, just reco... Read more

Read other 1 answers
RELEVANCY SCORE 88.4

I am trying to format a very long manuscript and am having a page numbering issue.

I know how to link/unlink headers and footers and create numbering within sections. So, my chapters are sectioned and numbered and each chapter starts with page 1.

I also need a running total of pages. I can't seem to have two formats in the same header (a section page numbering and an overall page numbering) so I planned to put the chapter numbers in the headers (unlinked to previous) and the total page numbering in the footer because they can still be linked.

Sounded good, but when I format the page numbering to start with '1' in the header, even though it is unlinked, the page formatting changes in the footer.

Is there any way around this?

I'm using Word 2010 in Microsoft Office Professional 2010 and Windows 7 Professional, if that helps.

Thanks.
Fr8549

A:Two Page Numbering Schemes in Same Document - Word 2010

Is this website any help for you.

Insert page x of y page numbers in just one section - Office Blogs

Or this one.

10 steps to setting up page numbering in Word sections - TechRepublic

Read other 4 answers
RELEVANCY SCORE 88.4

This new word is annoying. I'll be typing a paragraph and then as I go down the page lines I just typed will disappear, or they will blend into another which makes them unreadable. Sometimes single spacing will turn into double spacing, or into no spacing. Sometimes lines of text will be doubled under each other. All the text is still there the way I typed it, but it's not visible when reading over the document. If I want to go back to read what I wrote I have to insert returns into these invisible lines of text to have them appear again. If I scroll up then I can't see the last lines of what I wrote, they are not even there until I again have to insert my cursor and then start pressing enter. I don't understand why everything keeps shifting around like that. Shouldn't it remain static throughout? It's the most annoying thing to have to type a document and have to go through these magic tricks every time.
 

A:MS Word 2010 lines disappearing as I type a document...

I would certainly check the "Options" of Word and unmark each automatic feature, except the ones you really need.
 

Read other 3 answers
RELEVANCY SCORE 87.6

I have got Microsoft Office 2010 installed on Windows Vista and on Windows 7, and when I open a document in Word, I would like to view it at a zoom of 100% instead of the default zoom of 150%. I tried to follow the instructions over here in order to reduce the zoom permanently, but the macros simply disappear each time I close Word and open it again. I also followed the idiot's guide to installing macros as indicated in the link above, and the macros worked...but as mentioned before, they refuse to stick around.

What do I do in order to prevent the macros from disappearing?

Thanks in advance for your help

A:Word 2010: how do I change default viewing zoom of document?

i've never needed macros - i use the zoom slider at the bottom-right of the document window.

with saved documents, it seems that the zoom level is saved with the file - so if you saved at 100%, it will open later at 100%.

to set the level for new blank documents, use the slider, then close down word - the next new document will appear at that same level, with no need to save.

that's how it works for me, anyway.

just tested, and it keeps the level after a reboot too.

Read other 9 answers
RELEVANCY SCORE 86.4

Hi all,

I'm looking for a way in either Excel or Word 2010 to add text to a line before the text. So, for example I have something like this:

Name1
Name2
Name2
etc..

And then I want to add "1 " before each line in a way that is copy pastable, so it looks like so:

1 Name1
1 Name2
1 Name3
etc..

Is there anyway to do this. it's mostly just to help with copying text from Word/Excel documents onto forums so it formats correctly. Any help at all is much appreciated

Cheers,
Matt
 

A:Solved: Word/Excel 2010 Adding text before each line in a Document

Hi Matt,
It's probably a little cleaner to do it in Excel than in Word, but also a few extra steps. In Word:

You can run a find a replace. Without including the quotes, find "^p" (the paragraph symbol) and replace with "^p1 " (there's a space after the 1). This replaces the paragraph break at the end of each line with another paragraph break and then "1 " at the beginning of the next line. The problem with this method is that the first line won't have a 1 in front of it (because there's no paragraph break before that line) and the last line will have a stray 1 after it. But this should be relatively minor cleanup.

Alternatively, in Excel:

Insert a column to the left of your names. Without including the quotes, enter "1" in the first cell and copy it down your spreadsheet. Insert a column to the right of your names and enter this formula (assuming your names are now in column B):

=A1&" "&B1

This should give you the result you're looking for in column C. Hope that helps.
 

Read other 3 answers
RELEVANCY SCORE 85.6

Please help point me in the right direction.  I checked the File association on Internet settings and document type docx is associated with Word, but it won't open.  What do I need to change?
I received the following information when I clicked on the troubleshoot link:
Windows has the following information about this Protocol. This page will help

you find software needed to open your file.
Protocol Type: ms-word
Description: UnKnown
Windows does not recognize this Protocol.

A:SharePoint 2010 document broken link due to unrecognized File protocol: ms-word

Title:  SharePoint 2010 document broken link due to unrecognized File protocol: ms-word
Please help point me in the right direction.  I checked the File association on Internet settings and document type docx is associated with Word, but it won't open.



Try refining this symptom description.  What exactly do you mean by "it won't open"?  Answering that might explain why you are posting this in an IE forum.  E.g. right-click, Copy Shortcut whatever it is that you are calling
a "broken link" and Paste it here.
Otherwise, try right-click, Save target as... to put the file into your Downloads (Ctrl-j) and then use right-click, Properties to find its
full path and name.  Note that that would be quite different from what the Copy Shortcut step would have shown.
Next I suspect that the Set Associations GUI tool may not be showing you the correct information.  FWIW it certainly doesn't show me the correct information in W8.1.  So, I would try checking if you have an explicit association and file type combination
by using the assoc and ftype commands in a cmd window.  In fact, instead of just showing the ftype for the current association I would use this:
    ftype  |  find  /i  "word"
Then you could take the most appropriate template (not necessarily the one pointed to by the assoc command) and fill it in on a Run... dialog (or a ... Read more

Read other 14 answers
RELEVANCY SCORE 84

As above.

Is there a software upgrade i need to do.

I have the password. comes up with...

"Word experienced an error while trying to open this file"

Thanks in advance

K
 

A:Solved: Can't open password protected Word 2007 document in Word 2003

Read other 6 answers
RELEVANCY SCORE 81.6

Whenever i start word document or weird excel they ask for activation key

Read other answers
RELEVANCY SCORE 81.6

Is there a way to close a Word document in Word 2007 without going to the dropdown menu? What happened to the little 'x' in the upper right hand corner that all other Windows programs still have? I have the minimize, maximize, and large 'X', but if I am only working on 1 Word document and click the large X, the file AND Word both shutdown. Is there any way to get the little 'x' back?

A:Close Word document without shutting down Word as well

Go in word options/personalize and add the command "close"
The icon to close the current document will appear on the upper left tool bar.

Read other 13 answers
RELEVANCY SCORE 81.6

Hello all,

On the 12th October I was editing a Word 2007 document on my Vista Home laptop. Throughout editing I pressed Ctrl S to save the doc over the previous version. I copied data in from several other files.
I went back yesterday to edit the document again and it has disappeared. The only version of the doc is a previous version dated 21st Sept.
I searched on all files modified after 11th Oct just in case I had saved it under another name. Not in there. The files I copied data from did come up in the search results though, soi knwo the search function is working.
I checked the default Autosave location - not in there.
I checked the recycle bin - the doc is not in there and neither are any ~ files or autosaved files. I haven't emptied my recycle bin for months.
I cannot find a word doc modified afetr the 11th October.

Can it really just have disappeared? It is my MBA dissertation paper and I worked on this edit for an awful lot of hours.

Many thanks.

A:Word document disappeared: Word 2007

Welcome Suzanne

I am a lot older than you, but I still remember those term papers and finals. I will dow everything that I can to help

Start with this
DiskDigger | The trusted data recovery solution

Read other 1 answers
RELEVANCY SCORE 81.6

I have an old document created in Word Perfect 5.1 saved on a floppy disk. My present computer has Windows 98 and Microsoft Word. I need to edit and print the old Word Perfect document. Can it be translated to Word? Thanks.
 

A:Transfering word perferct document to Word

You should be able to hit File-Open from Word. Change the files of type (at the bottom of the dialog box) to "all files, *.*" and just double-click the Wordperfect document. It should automatically convert it.

After that, if I were you, I'd go to Tools-Options, Compatibility tab. Change compatibility to Word document. Then, hit ctrl-a to select the entire document, go to Format-Paragraph and make sure line spacing is single; then change the font to Arial, Times new roman, or other Word font, as opposed to the old Wordperfect fonts.
 

Read other 1 answers
RELEVANCY SCORE 80.8

Windows 7 categorises some Fonts as "Hidden" (based on the language setting).

In the attachment there are "hidden" fonts showing up in MS Word 2010. Is there a setting somewhere I have missed? Or does it just not work?

As a workaround, can I just copy the fonts I do not currently want into another folder, then Delete them from the Fonts folder? Or will that cause problems?

A:MS Word 2010 shows "Hidden" fonts in its menus

Anyone? Is this a Windows 7 bug?

-----------------
Edit: yes it is:

"Hidden Fonts" Are Displaying - Microsoft Answers

Removing foreign language fonts - Microsoft Answers

[both posts are @ answers.microsoft.com]

Read other 2 answers
RELEVANCY SCORE 80.4

I am running Windows 7 Home Premium 64-bit and Office 2010.

All of a sudden, when I tried to paste text I copied from an internet page, I got a message "Word could not create the work file. Check the temp environment variable" .

It worked fine this morning and is working fine now.

I had to paste it into Word Pad to use it.

I made no changes to Word. Any idea what is going on?
Thanks, cb

A:Word could not create the work file. Check the Temp... Word 2010

Did you check the temp environment variable as it suggested?

Open a command prompt.
Type echo %temp%
What is the result?

On my Win 8.1 computer, it's set to: C:\Users\accountname\AppData\Local\Temp

Read other 1 answers
RELEVANCY SCORE 80.4

Hi,
Don't mind the curious ones, but I'm one of them. So anyway, almost one year ago now, the Word macro virus W97M/Marker.C was running rampant around Gordon College, with many teachers and students alike being infected. I was even infected with it thanks to one of my professors posting an assignment description document that had it. I was running AVG 9.0 at the time, and it was flagged many a time over. I think there were like six or so instances. My memory may be flaky, as my laptop has undergone many reformats since then, but what I do remember is trying to ignore AVG's warning, due to the fact that AVG has given me many false positives when I used it. The message Word gave me was that the document couldn't be opened because it wasn't available. But the strange part of that is that AVG had not removed anything from the file. I can think of two reasons why the file wouldn't run with the virus in it. Tell me which, if either, is correct. One is that Microsoft has since changed the macro format from 2003 and earlier versions of Word simply due to the many viruses that once existed for it, or two, that message was a very convoluted way of telling me that Windows 7 no longer supports Virtual device Drivers (*.vxd) as I was able to open the file after it had been cleaned up by Eset NOD32. Any knowledge you folks have would be very interesting, as I have always been curious about the very odd weekend of February 12, 2010. Now don't get me ... Read more

A:random curiosity about MS Word macro viruses and why (thank the Lord), they don't work in Word 2007/2010

I don't know the particulars of the macro virus you mention, but with Microsoft Office 2003, a significant change was implemented that effectively stopped the propagation of macro viruses.

Prior to Office 2003, macros were enabled by default, and opening a document with macros and auto-execute meant the macros were automatically executed (and thus the virus could infect and propagate).

With Office 2003, macro security was introduced. With a Microsoft Office 2003 default install, macros need to be signed with a certificate issued by a trusted root CA. Macros that are not signed will not be executed. Users have to explicitly lower the macro security level for unsigned macros to execute. Almost all macro viruses were unsigned.

Read other 3 answers
RELEVANCY SCORE 80

I am using word 2010 and windows 10 on a Dell Inspiron 5559. I have reinstalled my printer and it's drivers and I have checked that the text colour is not white.
I am having problems with printing word documents. Within a word document any images print fine, as do the lines in a table but no text will print (in any colour).
I can see the text correctly in the word print preview panel.
Even the print test page prints with no text.

Can you help? Thanks
 

A:Word 2010 stopped printing text in word documents

what printer is this this ?
 

Read other 2 answers
RELEVANCY SCORE 80

I got the new version of word today on my brand new computer and I need a word processor for my job, and its not letting me pick it as my default one. When I go to the control panel and try to do it from there, it still doesn't pick it up. Why is this happening and how can I go through and change it?
 

A:Solved: Microsoft Word 2010 not my default word processor?

Read other 16 answers
RELEVANCY SCORE 80

When I send some friends a password protected word document created in Word 2010 they can't open it using word 2007 which is compatible with docx by using the correct password. I have no choice but to send as a Word doc instead of docx so they can open it.

Word 2007 User 1: Word launches no password box no error messages just the blue screen.

Word 2007 User 2: Gets the error message: ?Word cannot open this file . The encryption type used is not available. Contact the author of the file. More encryption types are available in the High Encryption Pack.?

Therefore I suspect some kind of encryption pack must be installed. I believe the user 1 has XP and user 2 has Win 2000 pro. are using XP. Do you know where these encryption packs are available? The other possibility might be for me to reduce the encription level when I create a password protected docx but I have no idea how to do that.

Is there a solution to this problem?


Kind Regards

Chris




Kind Regards
Chris

A:Word 2007 Can't open encrypted docx from Word 2010

Hi Chris,

I've been looking at this for a while, but cannot find an answer.

The only thing I can come up with, is an alternate suggestion, which I am sure you have probably thought of : use something like 7ZIP to encrypt the file, and then send that to your friends.

7ZIP

Regards,
Golden

Read other 5 answers
RELEVANCY SCORE 80

Hi everyone! Sorry I get kind of nervous posting on forums.My question is:Can you have both word 2007 and word 2010 as seperate programs on the same computer?I really enjoy tinkering in word 2007 when I got it. Though today I did qualify for the college discounted microsoft package. Which lets a college student buy the Microfsot Office Professional Academic Package can be found:http://www.microsoft.com/student/office/en-us/default.aspxBefore I got into college I did buy microsoft word 2007. Now I have a new package installed and it got rid of the word 2007.The reason why I wanted to hold onto it is because I like to help out others with word 2007. Unless I can actually open it and use it to give out directions. A lot of people I know haven't upgraded because of the cost. I don't blame them though would like to have it handy.Still have the original disc and package it came in. I do love looking at the shiny graphic on the microsoft "official" disc! Thank you everyone for reading my question! And help!

A:Possible to have both word 2007&word 2010 as seperate programs on same computer?

Hi everyone! Sorry I get kind of nervous posting on forums.My question is:Can you have both word 2007 and word 2010 as seperate programs on the same computer?I really enjoy tinkering in word 2007 when I got it. Though today I did qualify for the college discounted microsoft package. Which lets a college student buy the Microfsot Office Professional Academic Package can be found:http://www.microsoft.com/student/office/en-us/default.aspxBefore I got into college I did buy microsoft word 2007. Now I have a new package installed and it got rid of the word 2007.The reason why I wanted to hold onto it is because I like to help out others with word 2007. Unless I can actually open it and use it to give out directions. A lot of people I know haven't upgraded because of the cost. I don't blame them though would like to have it handy.Still have the original disc and package it came in. I do love looking at the shiny graphic on the microsoft "official" disc! Thank you everyone for reading my question! And help! As far as I know, without tweaking some of the files / registry entries, this is not possible.Even then, there could be problems.At my work, we use mul... Read more

Read other 7 answers
RELEVANCY SCORE 79.6

Okay--apparently 3 or 4 years ago I used a document to create a form template (not technically a form or template in the sense it did not have any fields--just used it to bring up to create new documents based on it). In any event, the document and apparently had some codes in it that I did not see and everything was fine for until moving to Word 2010. Now, virtually any document I pull up comes up with an error. I tried "Open and Repair" and that did not work.

But here is the issue--THIS NEVER SHOWED UP IN PRIOR WORD VERSIONS! I can go right now and pull the same document up on any one of 3 or 4 different computers in the office all running Office 2007 and the document displays fine. So there must be a way to stop Word from displaying the error. I don't want to have to go in an take out all of those codes from all the documents we have that includes them.
 

A:Any way to stop Word 2010 displaying "Error! Main Document Only"

Read other 12 answers
RELEVANCY SCORE 79.2

Because I do teaching for people who have both versions (2007 & 2010) of Word, I have to keep both on my computer. How do I get .doc and .docx to associate with Word 2010?

Because I work mostly in 2010, I want to default to opening with 2010 but I can't do it. When I do try to correct the association (through the Control Panel) it WON'T associate with 2010. I go to the winword.exe in the correct folder for 2010 and click on it but it just stays the same, still associated with winword.exe in the 2007 folder.

A:need word 2007 AND word 2010, how to set file associations

FileTypesManager is pretty good in cases like this one.

Download this free application, run it, look for docx. Hightlight it and press F2. In a new window delete anything in the User Choice field. Close that window and find Open coomand for docx in main Window. Make sure that command-line leads to Office14. Repeat for doc.

Read other 7 answers
RELEVANCY SCORE 79.2

Details:
Windows 7 Professional Edition Service Pack 1 Build 7601
Microsoft Office 2010

My user has spent years building her Auto-Text feature within Word 2003 to the point it is now, but her company just bought her a new Windows 7 Pro machine with Office 2010 installed. She asked that I migrate her Auto-Text data to Word 2010. After researching on google.com I found that this data is stored in a Normal.dot file and this file needs to be migrated to (in Windows 7)
C:\Users\<User Name>\AppData\Roaming\Microsoft\Office.

Having done this, I now find the Normal.dot file I placed there in this location, as well as a new Normal.dot file that Word 2010 has created, but the two aren't merging. I see the new file has macros enabled... Does anyone have any ideas on how to merge these files into one file useable by Word 2010?

Thanks,
S~

A:Help with migrating a Word 2003 file to Word 2010

Normal.dot is the global template for Microsoft Word and is stored in different locations on the system based on the version of Windows and Word.

You dont want to merge them you want to backup the existing normal.dot file to something like normal.old.
Then replace the file in the correct location, which I cant research for you right now.

The bad thing about doing things like this is that if normal.dot gets corrupted, all the work put in to this is lost!

Read other 2 answers
RELEVANCY SCORE 79.2

I normally use Word 2003 for documents, although I use Outlook 2010. This morning I opened a Word 2010 document and after quite a while of some sort of an installation, I was able to open the Word 2010 document. I did not think too much of it, except that later I was sending an e-mail and attached a Word 2003 document and when I went to check it (i.e. open it up) it opened in Word 2010. How do I disable Word 2010 as my default program to open Word documents. I do not want to uninstall the program, but at this point I am not ready to learn how to use Word 2010.

A:Word 2010 is opening my word 2003 attachments

SHG818 welcome to Sevenforums!

Have you tried this tutorial?

Read other 3 answers
RELEVANCY SCORE 79.2

Hi
I had a macro running in Word 2007, which simply removed paragraph breaks and replaced them with spaces. It did this for the selected text, and then asked whether the user wanted to continue with the rest of the document. To this I mostly selected NO.
In 2010 the macro replaces throughout the whole document without any prompts. I checked the macro on a Word 2007 machine and the code is the same as the new macro in Word 2010.
Can anyone suggest how to overcome this bug in 2010?
Thanks, Garry

The macro code is below:
Sub RemoveParas()
'
' RemoveParas Macro
'
'
Selection.Find.ClearFormatting
Selection.Find.Replacement.ClearFormatting
With Selection.Find
.Text = "^p"
.Replacement.Text = " "
.Forward = True
.Wrap = wdFindAsk
.Format = False
.MatchCase = False
.MatchWholeWord = False
.MatchWildcards = False
.MatchSoundsLike = False
.MatchAllWordForms = False
End With
Selection.Find.Execute Replace:=wdReplaceAll
End Sub
 

Read other answers
RELEVANCY SCORE 79.2

I am converting a large website of Microsoft Word files to TeX files and have written several useful Word macros to automate this process. When I converted from Word 2007 to Word 2010, the macros I wrote disappeared (a lot of supplied macros do appear). They don't appear even when I open a doc file where they have already been used in that file under Word 2007. It didn't occur to me to save the macros elsewhere, and apparently installing Word 2010 destroyed them.

Where can I find them?

Thanks

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) D CPU 3.00GHz, x86 Family 15 Model 4 Stepping 4
Processor Count: 2
RAM: 2046 Mb
Graphics Card: RADEON X600 256MB HyperMemory, 256 Mb
Hard Drives: C: Total - 476937 MB, Free - 393990 MB; F: Total - 305243 MB, Free - 26023 MB;
Motherboard: Dell Inc. , 0YC523, , ..CN708215ADH0IM.
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Enabled
 

Read other answers
RELEVANCY SCORE 79.2

I have a client with a problem creating new documents from the File > New > Word Document dropdown from Windows Explorer window. If I set her default font to Times New Roman it will stay for creating new documents from within Word. If she goes the other route mentioned above to create a new document it will always default to Courier. Also when she tries to save the document with the Save As item it defaults to txt instead of a .doc file. I am thinking there are two different templates for these two seperate ways of opening or creating a document.

OS is XP Pro
Word 97 SR-2B

Thanks!
 

A:New word Document from File > New > Word Document

bump
 

Read other 1 answers
RELEVANCY SCORE 79.2

I'm creating a document in word 2007 at one point of the document I want to insert a link or icon that points to a separate word document, when the master document is saved both documents are saved as one file so that i can distribute it to other people not linked on a LAN. I don't need the second document to be seen but launched on a separate window when the link or icon is clicked.
Can somebody please help I've seen this on emails and PP presentations but I'm not sure if it can be done in word, I would think so!

Thank
 

A:Solved: Word document within a word document

Not hard at all. Open the attached - I have included the instructions to show either the other text (or at least part) or just the icon.
 

Read other 3 answers
RELEVANCY SCORE 77.6

Hi All,

My office is upgrading from Office XP to Office 2010. We have a dozen different macros written for Office XP. They are all Word documents. Each produces a different form. Some have only about a dozen fields to populate. Others have up to 100 different options.

These macros run great in Word XP but crash when run in 2010 with a variety of VB errors. All our users are running Windows 2007 with the latest service pack.

Is there an easy method to upgrade these macros to 2010 format, without having to learn enough VB programming to recode all of them? I have an MSDN subscription and one idea was to try a gradual upgrade - from Word XP to Word 2003, then Word 2007, then Word 2010 - just alot of testing VMs to set up...

Thank you,

Mike C.
 

A:Convert Word XP Macros to Word 2010

Can you provide some examples of the code that is failing and include some of the error messages you receive? The issue could be as simple as differences in the object libraries that are being used. Without seeing the code it would be hard to tell.
Rollin
 

Read other 3 answers
RELEVANCY SCORE 77.2

Hello Experts,

I am cannot open my MS-word.docx document.
The error it get is White space expectedart:/word/docment, XML,Line,2 Column:642733.

I've tried everything I can think of! Including:
Saving it as a .zip file. Which it won't
Saving it as .txt: Which It will- But no help.
Looking at it in word pad: Still no help.

How can I find:,Line,2 Column:642733. and correct it? or at least save what Ive written to that point.
I have no idea what happened to cause this other than the flash drive didn't update on my last save...

Please please Help.. hours of work were invested....

Thank you
 

Read other answers
RELEVANCY SCORE 76

When saving a Word 2007 document as a webpage (htm, html), an extra folder is automatically created besides the hmtl document itself. This folder contains background information like pictures, wallpaper etc. Is there a way to prevent that folder from being created in the first place? I've got Word 2000 on another computer, and when I save my word documents as html files over there, that extra folder is not generated. The only time that folder is created in 2000 is if my documents contain pictures, wallpaper etc. In Word 2007, it is created all the time, even though my documents are just plain text.
 

A:Solved: Word 2007, saving document as html document: how to get rid of extra folder?

Managed to find the solution, it was very simple after all. One has to save the document as a filtered webpage and click "yes" when a box pops up warning you that you will use certain featuers which are specific to Office2007, such as the background. Then the document will save without that extra folder and files.
 

Read other 1 answers