Over 1 million tech questions and answers.

Dell Optiplex 990 with Windows 10 - not detecting PCI new GPU

Q: Dell Optiplex 990 with Windows 10 - not detecting PCI new GPU

Hello,

Searched many sites, tried many suggestions. Issue is GPU on PCI slot not detected for Dell OptiPlex 990 using Win10 Pro. The GPU is EVGA GTX960. Installed PSU as well at 550 Watts. The BIOS does not let you to disable the integrated video card. I have done the following.. updated BIOS, reinserted GPU, uninstalled driver and disabled and disconnected cable to integrated video, and tried to use CMD bcdedit/set pciexpress forcedisable.

When booting up new GPU van turns on but then turns off.

Best Regards,

Word.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Dell Optiplex 990 with Windows 10 - not detecting PCI new GPU

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 72.4

Dear all,Recently we bought Dell optiplex 7050 i7 Desktop. and i am installed Pfsense 2.3 on it. i am not able to found the in-built nic card. pfsense not detecting my in-built nic. Please help me on this issue.Thanks & Regardskibbs

Read other answers
RELEVANCY SCORE 62.4

I was planning on buying either a Dell Optiplex 780 SFF or an Dell Optiplex 980 SFF but I would like to know which one will work with Windows XP 64 Bit.

A:Will Windows XP 64 Bit work on a Dell Optiplex 780 SFF or Optiplex 980 SFF?

For Windows XP 64 Bit its best to use the somewhat hidden (old ftp website):
http://ftp.dell.com/Browse_For_Drivers/Desktops/Optiplex/OptiPlex%20780/
http://ftp.dell.com/Browse_For_Drivers/Desktops/Optiplex/OptiPlex%20790/
http://ftp.dell.com/Browse_For_Drivers/Desktops/Optiplex/OptiPlex%20980/
This has the old drivers listed of multiple versions including the XP x64 drivers not mentioned on Drivers and Downloads. The new ftp website is slightly broken at present.

Read other 6 answers
RELEVANCY SCORE 62

Hi. This 24pix MINI atx power connector is basically the same as normal ATX connector (bur smaller of course)? At the pin settings is different? Where I can buy 24pix ATX to 24 pin MINI atx adapter that will work with those boards? Thanks.

A:Dell OptiPlex 760 (GX760) SFF and Dell OptiPlex 780 (GX780) SFF mainboard power connector?

Moddiy makes this.
Dell 980 960 780 760 PSU 24-Pin to Mini 24-Pin Adapter Cable (10cm)http://www.moddiy.com/products/Dell-980-960-780-760-PSU-24%252dPin-to-Mini-24%252dPin-Adapter-Cable-%2810cm%29.html
 

Read other 1 answers
RELEVANCY SCORE 60

My dell optiplex 740 will open windows ,so before this happened,i install windows 7 home premium instead of windows 7 professional.When it didn't install properly,my windows will not open after i restart my PC it keeps saying  The computer restart unexpectedly  or encountered an error.Windows installation cannot proceed.To install windows,click "OK"to restart the computer,and then restart the installation.this message keeps repeating itself every time i boot my pc up.I try to reset my PC factory settings,but it wouldn't work,do i need  to buy a Dell recovery disk to get my PC running?

Read other answers
RELEVANCY SCORE 58.4

Hello, I own a Dell Optiplex 745, running Windows XP Professional 32-bit. The Dell System Direct isn't launching, even though it will download, it says .APPLICATION, which cannot be opened. Does anyone have a fix?

Read other answers
RELEVANCY SCORE 58.4

Hello, I own a Dell Optiplex 745, running Windows XP Professional 32-bit. The Dell System Direct isn't launching, even though it will download, it says .APPLICATION, which cannot be opened. Does anyone have a fix?

A:Dell Optiplex 745 - Windows XP Pro 32-bit Dell System direct issue.

The older versions of Dell System Detect are security risks - if you're running an antivirus program, it may be flagging and intercepting the program.  At any rate, you should NOT be using Windows XP online at this point, as it has seen no security updates in almost two years - you really need to upgrade to a supported version of Windows (at this point, that's a minimum of Windows 7).

Read other 1 answers
RELEVANCY SCORE 56.4

Hi,
I have an OptiPlex 9010dt on A22, and according to the technical guide, I should be able to install 16gb without issues using 4x4gb configuration.  I got 4 identical sticks of Kingston 1600 and installed them.  Here's the strange thing, no matter what I do, it only detects 8gb.
It detects slots 1&2 but labels 3&4 empty.
As troubleshooting I've tried moving the sticks around, but I get the same results.
If I remove 8gb and fill slots 1&4 the system detects the ram, similarly If I populate just 2&3.  But if you populate all 4 slots, it only detects 1&2.  I'm sure it's not an issue with either the Ram sticks or the slots.
Any suggestions would be appreciated.

Read other answers
RELEVANCY SCORE 56.4

Hi, I might be able to buy a second hand Optiplex mini tower and I would like to install the motherboard etc. of my Optiplex 755 SFF.

Wilt thi fit?

The idea is that with the Mini Tower I can buy a better GPU.

thanx.

A:Does motherboard of Optiplex 755 SFF fit in a Dell optiplex 745 dualcore mini tower?

No it wont fit.   The board layout, number of slots etc is different.

Read other 2 answers
RELEVANCY SCORE 54.8

We have a number of Dell Optiplex 320s, which are rejecting wake on LAN requests following upgrade from Windows XP to Windows 7.
The onboard network adapter is a Broadcom 440x 10/100 Integrated Controller. The latest driver v4.60.0.1 is installed. I've also tried a different network adapter, Realtek RTL8139/810x Family Fast Ethernet NIC.
WOL is enabled in the BIOS. The BIOS has been upgraded to v1.1.12.
Does anyone know how WOL can be enabled for this model with Windows 7?
 
Andy Harris.
IT Technician, Redmoor Academy.
 
 

A:Dell Optiplex 320 WOL with Windows 7

Hello Andy,
I have the same problem with OptiPlex 320s.  Did you ever find a solution?
Thanks!

Read other 1 answers
RELEVANCY SCORE 54.4

Hi, I recently upgraded my Dell Optiplex 755 EnergySmart MT to Windows 7.0.  I am not getting any sound from the speakers.  Can someone please help?

A:Dell Optiplex 755 MT with Windows 7.0 NO SOUND

The windows Vista Driver for X86 or X64 works fine in windows 7 or windows 8 or windows 8.1 You will also need the AMT HECI drivers if the system has Vpro
http://downloads.dell.com/Pages/Drivers/optiplex-755.html
http://downloads.dell.com/audio/R164900.exe
 
There are Newer Files that you don't need to jump thru hoops for.

One Size Fits all.

Operating Systems

Windows 7 32-bit

Windows 7 64-bit

Windows Vista 32-bit

Windows Vista 64-bit

Windows XP

Windows XP x64

Chipset

ftp.us.dell.com/.../R174616.exe

HECI

ftp.us.dell.com/.../Intel_AMT-HECI_A02_R255437.exe

SOL

ftp.us.dell.com/.../Intel_AMT-SOL--LMS_A02_R255438.exe

Hard Drive Installation (via WinZip) with Setup.exe File for Intel_AMT-HECI_A02_R255437.exe

Download

1.Click Download Now, to download the file.

2.When the File Download window appears, click Save (Windows XP

users will click Save) this program to disk and click OK.  The Save In:

window appears.

3.From the Save In: field, click the down arrow then click to

select Desktop and click Save.  The file will download to your desktop.

4.If the Download Complete window appears, click Close.  The file

icon appears on your desktop.

Install

1.Double-click the new icon on the desktop labeled Intel_AMT-HECI_A02_R255437.exe.

2.The Self-Extracting window appears and prompts you to extract or

unzip to C:\DELL\DRIVERS\R255437. Write down this path so the executable (I.e.

Setup.exe) file can be found later.

3.The Self-Extractor window... Read more

Read other 4 answers
RELEVANCY SCORE 54.4

We got a new Dell OptiPlex 7040 with Windows 7 Pro SP1. When checking for updates it keeps going and going and going and going. There are no messages about installing new updates or messages about there's no updates.Please advise.Thanks.

Read other answers
RELEVANCY SCORE 54.4

Hello,I've been experiencing a very frustrating problem on my PC. Around 2 minutes after turning it on and entering the OS the screen freezes and there's nothing to do but force the PC to turn off pushing the power button.I've updated the drivers, checked all the conections and nothing. It also seems that it happens more often whenever I connect the Ethernet cable before turning it (the PC) on. I don't know if that has anything to do with the problem but I need to fix it ASAP since it is the computer I work with.
Here's a couple of screenshots of the PC characteristics (I hope you don't mind it is in Spanish):

Read other answers
RELEVANCY SCORE 54.4

We have a newish Dell Optiplex 990 with Windows 7 Enterprise x64 installed on it and the past couple of weeks we have been getting BSOD on it. At first the frequency was every few days, now it's at least once per day. So something is definitly going on. Here is the information that I have collected so far:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.4
Local ID: 1033

Additioinal information about the problem:
BCCode: 3b
BCP1: 0000000080000003
BCP2: FFFFF880044D78EB
BCP3: FFFFF880078A8C10
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product 255_1

I have verified that all patches have been applied, the latest BIOS is installed, and all of the latest drivers from Dell have been installed.

Attached is the minidump file and a screenshot of the System Event Log for it.

If anyone has a suggestion as to what the problem is I would be greatful!!

Thanks,
Lamar

A:Windows 7 BSOD on Dell Optiplex 990

1. rdbss.sys; System exception in System
Otherwise known as the Redirected Drive Buffering SubSystem Driver. Run HDD Diags: HD Diagnostic then report back to me the results, please.

Read other 16 answers
RELEVANCY SCORE 54.4

I have a Dell Optiplex 320 with 1 GB of ran (expandable to 4). It is a Dou Core so it uses one of these 2 chips:

IntelŪ PentiumŪ D 800MHz FSB Socket T with Dual Core technology XD, EM64T, 2x2MB L2 cache, and EIST (900 series)
IntelŪ PentiumŪ D 800MHz FSB Socket T with Dual Core technology XD, EM64T, 2x1MB L2 cache (800 series)​
Will it run Windows 10. Does it support these:
PAE gives 32-bit processors the ability to use more than 4 GB of physical memory on capable versions of Windows, and is a prerequisite for NX.
NX helps your processor guard the PC from attacks by malicious software.
SSE2 is a standard instruction set on processors that is increasingly used by third-party apps and drivers.
If it would support those functions, with only 1 GB would it be too slow?

I got my Dell Specs from here
http://www.dell.com/downloads/global/products/optix/en/opti_320techspecs.pdf
 

Read other answers
RELEVANCY SCORE 54.4

Hey guys!
Is it possible to install Windows 7 on this machine?
My dad found a Optiplex GX280 lying around somewhere.
He brought it back home and I was pretty impressed by it's specs.
Windows XP Professional Service Pack 3 (Build 2600)

Memory (RAM) 503 MB

Intel(R) Pentium(R) 4 CPU 2.80GHz

2773.4 MHz

Am not so sure about a graphics card,
I opened it up and it seemed like something was missing.
It doesn't really matter now.

I will use this computer as a secondary in my home,
Am going to set it for my dad,
So he won't use mines anymore.

Am having second thoughts about installing Windows 7 on this machine because of it's low RAM and it's older chipset.

If I do install Win7 on this machine,
Am going to remove all the eye candy from it so it won't rely as much on it's graphics.

I also posted this almost exact post here:
Dell Optiplex GX 280
(Since the author of that post also talked about the same machine)

The reason I want to install Windows 7 on this computer is because of HomeGroup.
I have a lot of files on my main computer that I might need in the future.
So in a long shot, I just want to sync up both computer in my network.

Should I go for it?

A:Windows 7 on Dell Optiplex GX280

  
Quote: Originally Posted by Microsoft Support


If you want to run Windows 7 on your PC, here's what it takes:
1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor.
1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit).
16 GB available hard disk space (32-bit) or 20 GB (64-bit).
DirectX 9 graphics device with WDDM 1.0 or higher driver.



Windows 7 System Requirements

Like you said, the RAM would be the an issue.
I would bump it up to at least 1GB..

Drivers for Windows 7 might also be an issue, Check with Dell Support Page for the model an see if they have any drivers for Windows 7.

You need a graphics card/device that supports at least DirectX9 in additon WDDM (Started when Vista came out)

Research before installing!!

If you have the Windows XP disk than I would maybe try it out (I say maybe because if it was me I would just accept XP but that does not mean it can't be done.)

If anything goes wrong or you can't find drivers that Windows 7 will accept than you can always re-install XP. (If you have the disk)

Although HomeGroup is a cool feature you can share a folder or even a drive in XP, or buy a network storage unit. That way any computers in your network can have access to files and folders

In the end all the specs are there if you bump the RAM to 1GB, just don't expect it to be fast.

Hope this Helps, and Happy Holidays!
Ryan

Read other 7 answers
RELEVANCY SCORE 54.4

Computer was working fine and then it just crapped out. Running Windows XP. When I start it up, it flashes the Dell screen, and then it goes to a blank black screen with the cursor in the top left corner. If I do F12, I can bring up boot options and system diagnostics but that's all. No safe mode option. I was going to reload the operating system as there is nothing on the computer worth saving. I put the windows xp reinstall cd in and it says "Push any key to boot from cd.." and then it just hangs no matter what I push. What should my next step be, please! It's a work computer which we need to have operating if we can.
 
 

A:Windows XP won't load on Dell Optiplex

Hi
 
From the symptoms you described, i suspect a HDD failure. Follow the below steps.
 
1 ) Remove the side cover and replace the HDD cable (IDE or SATA). If you don't have a spare cable, borrow the CD drive cable. This step will solve any potential connectivity problems.
 
2 ) Run built in System Diagnostics. Press F12 during power on and select the "diagnostics". Allow it to run a full extended test. Post the result of the test in next reply.
 
3 ) If Dell diagnostics didn't find any problems, download and run Seagate seatool for DOS.
 
    http://www.seagate.com/support/downloads/item/seatools-dos-master/
 
Burn the ISO to a CD using Imgburn or any ISO burning app. After booting from the CD, select long test and allow it to check the full surface of the HDD. Report the output of the test displayed by seatool. 
 
Here is an example video on how to use seatool.
 

Read other 14 answers
RELEVANCY SCORE 54.4

I have had this Dell desktop computer for about 6 years running Win XPpro SP3, and it was running fine until my kids were playing an online game. 
 
While they were playing the cursor from the Microsoft wireless mouse disappeared. I put in a new battery and tried pressing the tiny buttons on the bottom of the mouse and the USB stick. Still nothing.
 
On the screen was a long horizontal box that said Press space bar to exit, or something like that.
I don't know if it was a prompt from the game, or some kind of spyware thing, but I pressed it and it shut down the browser.
 
Without a cursor, and looking at my desktop icons, I figured I better restart the computer. So I used my keyboard to start Shut Down. It then started to install 8 updates. After the last one, message was "WIndows shutting down". That stayed that way for a good 1/2 hour.
 
That didn't seem right, so I pulled the plug out of the back so that I could restart the PC. I then hit the power button, and the Dell screen with the OptiPlex number and the BIOS revision number came on as ususal, except the horizontal bar that shows system starting did not proceed left to right. It stopped not even 1/4 of the way across the screen, and it just stays that way.
 
I pulled the plug out to try again - same result.
 
I do not have a Dell or Windows install CD or any install from USB stick, so would like to know what my options are, short of taking it in for repair.
 
I can use ... Read more

A:Dell Optiplex Won't Load Windows

Hello,
Is the Netbook also running XP?

Read other 5 answers
RELEVANCY SCORE 54.4

I've been salivating at the idea on installing W 8-64 Pro on a Dell Optiplex 755 at work. But a sudden reality check came over me & I realize Windows 8 doesn't necessarily work on older machines. The Dell is a Vista era machine. So maybe W 7-64 Pro would be a better choice?

Obviously I should call Dell. But I am hoping someone on these forums might have some experience with the machine in question.

A Google search returned a lot of questions about installing Windows 7 which made me realize W 7 must had been a challenge 3 years ago.

A:Install Windows 8-64 on Dell Optiplex?

I run Windows 8 32 bit on a gx755 at work...as it only has 2gb of ram. Everything worked just fine right out of the box, no Dell drivers needed. This is my primary Windows 8 machine.

Read other 25 answers
RELEVANCY SCORE 54

How to install Windows 10 on a Dell OptiPlex 3040 MT coming with Windows 7 Pro x64 installed (and which includes a Windows 10 Pro license)?
The system comes with a DVD labeled Windows 10 Pro x64 reading "use to reinstall the operating system on a system with OS installed"

A:(Redirected) Dell OptiPlex 3040 MT Windows 7 Pro (include Windows 10 Pro license) - How to install Windows 10?

Best to post this in the Windows 10 forum here:http://en.community.dell.com/support-forums/software-os/f/4997Bev.

Read other 1 answers
RELEVANCY SCORE 53.6

Can install 
Intel Chipset Software Installation Driver

This package provides the Intel Chipset Software Installation Driver and is supported on Dimension 9200c/E520, OptiPlex 630/745/745c/GX520/G...
 File Name: R132539.exe
web site link:
Hope this can help.

Henry

Read other answers
RELEVANCY SCORE 53.6

Hello,
I bought OptiPlex 7040 module which had Windows 10 Korean version 1 weeks ago. I want to install Windows 7 but it seems to be not work.
My computer has SSD and HDD. When the installation starts, I cannot find the SSD, therefore I select the HDD for installing Windows 7. (I already try this guide en.community.dell.com/.../19669861 but it is not work)
However, the installation process run few seconds and it stop after rebooting.
Could you please tell me how to fix this problem? Thank you

A:Cannot install Windows 7 on Dell OptiPlex 7040

tuynguyen,You can click the link below and choose install option 3 to install Windows 7. You can also do a google search for many links to downgrade to Windows 7.How to install Windows 7 on OptiPlex 7040 Downgrade from Windows 10 to Windows 7

Read other 1 answers
RELEVANCY SCORE 53.6

I bought recently a re-furbished Dell Optiplex 760. I installed an SSD for the boot drive and tried to install Windows 7 Pro 64-bit (the OEM CD). The install ran smoothly up to a certain point and then did nothing. I repeated the installation with the 32-bit version and this completed successfully. The point at which the 64-bit install failed appears to be when the installation process tests the video performance, suggesting a problem with the 64-bit versions's graphics-card driver. The successful install revealed the graphics card (on-board chip, in fact) to be the Intel Q45/Q43 Express chipset. Has anyone had a similar experience and dealt successfully with the problem ?

A:Installation problems : Windows 7 64-bit on Dell Optiplex 760

See here: How to Access Device Manager During the Installation of Windows 7

The part to follow is down a ways under Now for Safe Mode:.

Disable your video card/chip for now then download and install the latest driver once it completes if Windows Update does not resolve theproblem.

Read other 5 answers
RELEVANCY SCORE 53.6

I have a user on a Dell Optiplex 990 (Windows 7 64 Bit) that repeatedly gets the following blue screen info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA80086B72D0
BCP2: FFFFF8800419E45C
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\030613-39062-01.dmp
C:\Users\xxxxx\AppData\Local\Temp\WER-737510-0.sysdata.xml

I've updated the BIOS, reinstalled all the video drivers, and physically swapped out the AMD video card that looks warped by the card's heat sync.

Suggestions? Thanks in advance for any help!

A:Windows 7 64bit BSOD on Dell Optiplex 990

Additional Files

Read other 6 answers
RELEVANCY SCORE 53.6

I have my ACT and MCSE certifications. I've been workings on pc's for over 17 years. But now I've ran into 2 problems that I haven't figured out how to fix yet and this is with Dell computers that have USB ports only and no ps/2 ports.
First, When I install Windows XP Sp2 on a Dell computer while using a usb mouse and keyboard. After the install is complete and configured and I have removed all the question marks in the device manager by installing the appropriate drivers. Everything works fine. But if I turn off the pc and unplug it to move the pc to a new location. I turn it back on and Windows try to find the usb keyboard and mouse but it doesn't completes because I have to click yes for it to search for the HID compliance device driver. But I can't click anything because the mouse and keyboard is not working until the plug/play install completes. I've updated the chipset from the dell support site and that doesn't work. I updated the chipset from intel which are the newest drivers and that still doesn't work. I go into the BIOS and the USB setting is enabled or if there is a legacy option for USB I enable that one too. Help!
Second, on a Optiplex GX280 after installing Windows XP Sp2 on the pc. I go into the device manager to configure all the devices with the appropriate drivers that has question marks except for the vga. The pc works and is running fine. Now as soon as I install the video driver software that installs a chipset as well the pc works fine untill I reboo... Read more

A:Insalling Windows XP Sp2 on a Dell Optiplex GX280

I found that the keyboard and mouse sometime take a few min. to begin working after a fresh install(usually 1-3 min). I have experienced this on about 5 computers in the past year that have had to be reinstalled for one reason or another.

For both computers it sounds like a driver is causing problems. Have you tried just using the drivers that came with the computers on the Drivers & Utilities Disk?

Read other 8 answers
RELEVANCY SCORE 53.6

Hello,
See Question-title. I have USBs a male 9-pin VGA output, a display port, and another narrow slit port (not HDMI) I've tried a Display port to HDMI cable into TV but no joy. when I click on "device managers" I have three ports: Com1, ECP printer (LPT1) and Intel Active mangament technology SOL (COM)3

my TV is a Samsung HD with two HDMI ports. a 15 hole female VGA, and 2 scarts. I would be happy to get only visual to TV at the moment but how? Regarding audio, let's leave that for another time.

I tried calling Samsung but lines were busy: I'll try again. Any help appreciated.
 

A:Windows 8.1 I have Dell Optiplex 780. How to connect to HDTV?

Hi TarquinThyroid, and welcome to TSG.

I am unable to find any information on Dell Optimex computers. Do you perhaps have a Dell Optiplex 780 computer?

If so, a simple passive Display Port to HDMI cable will not work for you. That type of cable only works with devices that have a dual mode Display Port (DP++) output. Per the following page on a Dell forum, Optiplex computers do not support DP++ outputs. You would need a powered Display Port to HDMI adapter or active cable to make the conversion.

http://en.community.dell.com/support-forums/desktop/f/3515/t/19497378

Do you have a basic passive Display Port to HDMI cable or an active Display Port to HDMI converter cable?

The 9 pin connector on your computer is most likely a serial port. If it is an Optiplex 780, there should also be a 15 pin VGA female connector on the back. That should work with a suitable VGA cable to connect to the VGA port on the TV.
 

Read other 3 answers
RELEVANCY SCORE 53.6

Greetings I have a Dell Optiplex 390, for the compatibility with at least a very big important printer and certain applications, I need to install(settle) Windows XP in this machine, but the audio does not work and especially the video is fashion standard VGA, none pilots(drivers) DELL for this one for XP of 32 bits but for W7 of 64 bits a pilot(driver) GMA INTEL HD I tried the pilot(driver) of Dell download of Dell .pourtant it was indicated for XP I have Windows XP 32 bits SP3 in French installed in these machines. Please help at least if I little to have the video standard VGA it is hideous  Thank you

Read other answers
RELEVANCY SCORE 53.6

Hello
I am using MDT 2013.  I've imported the driver pack for the OptiPlex 3040 from Dell for Windows 7 x64.  After MDT installs the OS, it reboots into Windows to begin initialization but it never finishes.  Instead it reboots again and goes into the Dell Diagnostics utility and runs a test on memory. 
After the test runs, it tries to boot into Windows and I end up selecting "last know good config."  It finally loads windows but then none of the USB ports work.  I have to remote into the pc to manually install the USB and chipset drivers to finish the MDT deployment process.  This has happened on multiple machines and is a repeatable process.  Is anyone else having this issue? 

A:Dell OptiPlex 3040 Windows 7 MDT Problems

Did you either manage to resolve this issue? Or did you always have to go through last good config?
I'm trying to get Windows 7 x86 to install on both a OptiPlex 3040 and a Latitude E5570 with no joy. The previous models were fine.

Read other 5 answers
RELEVANCY SCORE 53.6

Wondering if i can run a dual boot running my already installed XP OS then adding Windows 7.

My PC is a Dell Optiplex 755 running Intel Dou core 2 E8200 @2.66GHz with 3.25 GB of RAM.

I'd like to add Windows 7 because my SONAR DAW software demands it. My XP OS is buggy with the drivers etc...

Can this be done? Or would i be better off just buying a new cheap PC that has Windows 7 loaded?

Just so you know... I want to keep my XP OS because I have CS3 loaded.
 

A:Solved: upgrade to Windows 7 on Dell optiplex 755?

Read other 9 answers
RELEVANCY SCORE 53.6

i have a Dell Optiplex 755 that i have done a clean install of Windows 7 on.all is working OK, but i am having an audio problem.I installed the Vista audio drivers for this model from the Dell website and the audio appears to be OK (windows detects it and gives volume control).however i was expecting to hear sound from the internal speaker, but i get no sound at all.
should i be able to get sound from the internal speaker?

Read other answers
RELEVANCY SCORE 53.6

Recently our Dell Optiplex 330 experienced some pretty severe virus attacks that render the computer useless. The user had disabled the installed protect advising that it slowed his performance and would not let him install cute little things from his favorite social network. The machine was so hosed it was determined the best course of action was to reformat the drive and basically start over. The problem is this unit was sold to us by Dell with a license for Windows Vista Business which we request it be down graded to XP service pack 3. Each time we attempt to reinstall windows xp from teh provided original disc we get the famous blue screen advising there is a problem with the hard drive, etc. How can we reinstall the our favorite XP? The unit has a SATA hard drive. Any assistance would be greatly appreciated.
 

A:Issue with reinstalling Windows Xp on Dell Optiplex 330

Read other 7 answers
RELEVANCY SCORE 53.6

Hi please help i have got a dell OptiPlex 755 (discontinued model)

i boot up that takes a bit longer than normal then it goes to the windows 7 logo twirly thing it pauses half way through a flash of blue screen (too short to get a code) then it restarts i can then go to the option to start up recovery or start normally i go to recovery it scans my system wants to send something to Microsoft. i have also tried boot rec.exe that didn?t work

i have just got hold of windows vista and xp instillation disk i am going to try that.

Please help

Also see my vid of what it does http://www.youtube.com/watch?v=KJ6rwHmGNhk

Thank you

A:windows 7 dell optiplex 755 boot fail

You could download the appropriate .iso file, burn it to disc, and then try to repair your computer.

Official Windows 7 SP1 ISO from Digital River ? My Digital Life

Read other 3 answers
RELEVANCY SCORE 53.6

Greetings I have a Dell Optiplex 390, for the compatibility with at least a very big important printer and certain applications, I need to install  Windows XP in this machine, but the audio does not work and especially the video is fashion standard VGA, none pilots(drivers) DELL for this one for XP of 32 bits but for W7 of 64 bits a driver GMA INTEL HD I tried the driver of Dell download of Dell .pourtant it was indicated for XP I have Windows XP 32 bits SP3 in French installed in these machines.
Please to help at least if I little to have the video standard VGA it is 30 % of the difficult screen has  read lira there was certainly a video driver for XP of 32 bits Windows Home or PRO 
Thank you

A:Windows XP driver video for Dell Optiplex 390

XP Drivers are listed on the Dell downloads for the OptiPlex 390.
There are drivers for AMD Radeon 6350 and 6450.  Also Intel Video
drivers.
www.dell.com/.../drivers

Read other 3 answers
RELEVANCY SCORE 53.6

I have a 15 month old Dell Optiplex 990 (Core i7 2600 @ 3.4GHZ; 16GB DDR3 Crucial RAM (4 x 4GB); 1TB WDD HDD; 2 x Radeon 6450 Graphics dribing 2 x HP LP3065 displays at 2560 x 1600). Ran fine in Win 7 HP. Upgraded two weeks ago to Win 8 Pro and I get (a) video driver crash/restart after about 20 minutes then intermittently and (b) after about 30 minutes I loose connection to the Internet, even though the connection wizard indicates it's still up.

I have updated the AMD video drivers to the latest release (but not the newest beta) and reinstalled Catalyst control center; updated the System BIOS to A16; removed everything (HW & SW) that fails the compatibility test; swapped the memory around and tried it with only 8GB; run the diagnostics on the system, memory & HDD (no errors reported); Nothing has fixed the problem and I am about out of ideas. I am considering replacing the graphics cards with something from nVidia as well as installing new RAM.

Am I missing anything? Has anyone seen anything like this?

Might have to revert to Windows 7. At least I have a backup of the pre-installed configuration......

Read other answers
RELEVANCY SCORE 53.6

I Have elderly Dell optiplex 170L with a 2.4 Ghz processor and a 512mb ram and need to update to at least windows 7. have sourced ddr Ram boards to increase Ram to to 2Mb but windows 7 requires a DVD+RW apparently! where do I get one, and does it just replace the cd+rw? what connections? What drivers? Do I replace hardware before software or other way round? sorry guys you probably think this is such an easy one, but I am an oldie and need a bit of help. thanks to all of you out there that help us!
 

Read other answers
RELEVANCY SCORE 53.2

I'm scratching my head with this one. I'm new to analyzing crash dumps and was hoping someone could point me in the right direction. This PC receives a BSOD with the message "Critical Process Died". Here's the text from the analyzed dump.
 
Microsoft ® Windows Debugger Version 10.0.10586.567 AMD64
Copyright © Microsoft Corporation. All rights reserved.
 
 
Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Bitmap Dump File: Kernel address space is available, User address space may not be available.
 
 
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 10 Kernel Version 10586 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 10586.0.amd64fre.th2_release.151029-1700
Machine Name:
Kernel base = 0xfffff800`a2c83000 PsLoadedModuleList = 0xfffff800`a2f61cb0
Debug session time: Mon Jan 25 07:48:18.689 2016 (UTC - 5:00)
System Uptime: 2 days 14:48:57.138
Loading Kernel Symbols
.............................................................Page 103... Read more

Read other answers
RELEVANCY SCORE 53.2

I got this system from a freind it is a dell ( i know ) optiplex Gx260 1.8 p 4 they had windows pirated and installed the wga so it locked out i put three different copys of xp in drive to no ovail it will not boot to disk put win 2000 in same i had my mac os leopard start to run and it stops in the middle so that tells me the drive is good i changed the boot sequence to run from usb and tryed copying xp to a usb drive no way it says operating system not found hit f1or f2 so i hit f12 to do it that way and i pick ide cd rom drive and still it says hit f1 or f2 so is there any one that can help me the guys at dell are rude and there web site was no help
 

A:Solved: Installing windows xp on a dell optiplex gx260

Read other 8 answers
RELEVANCY SCORE 53.2

My Dell PC is stuck on windows is starting up screen. I tried booting up in safe mode with command prompt and I get the same thing.  Also I did a repair install and it got stuck with the Black windows xp screen.  Any ideas on what to do next?  Thanks

Read other answers
RELEVANCY SCORE 53.2

Hi

I have been using my machine (winXP Media Center) fine since I purchased it but I went to boot the pc this morning and it will not boot windows. All that happens is the dell screen loads (the white bar fills up) then all that appears is a black screen with a cursor blinking in the top left corner?? How can I fix this?

I have looked all over the net but cannot find the answer, thanks!
 

Read other answers
RELEVANCY SCORE 53.2

Hi,
I own a Dell Optiplex GX270 and I recently upgraded it from Windows XP to Windows 7 Ultimate. The problem is, everything on the screen is way too big, and I am not able to change the screen resolution. I am currently looking for a driver that I am able to use with this computer. I have tried going into BIOS setup and changed Integrated Devices (LegacySelect Options) and changed the Onboard Video Buffer from 1mb to 8mb, but that didn't work either.
System Specs:
3.0GHz
2GB Ram
40GB Hard Drive

-Tayler

P.S I know on my profile it says I have an acer and that my computer is a laptop but this GX270 is a computer that I am selling.

A:Dell Optiplex GX270 Windows 7 Graphics Driver

Sounds like there is no graphics driver loaded. Is there a graphics driver in Windows Update?

Read other 9 answers
RELEVANCY SCORE 53.2

Hi,
I have Dell Optiplex GX260 system. I intalled Windows 7 Ultimate on that. The resolution of screen is fine but it is not supporting 1280 x 1024 resolution and videos are not playing properly. It was not taking audio drivers as well but when I ran the SoundMax drivers for XP in compatibility mode they were installed. But display drivers are not getting installed. I even tried the various driver from Nvidia for XP/Vista/Win 7, but none of them works. Even tried the latets 191 release but no use.
Someone please help me. Suggest me some driver.

A:Diplay drivers for Dell Optiplex GX260 for Windows 7

Try to install this, in XP compatibility mode if normal way fails.

http://search.dell.com/results.aspx?c=us&l=en&s=gen&cat=sup&k=gx260&rpp=12&p=1&subcat=dyd&rf=all&nk=f&sort=K&nf=19019~7~141 294&navla=19019~7~141294&ira=False&spf=OptiPlex&ssysid=PLX_PNT_P4_GX260&ssysn=GX260&~srd=False&ipsys =False&advsrch=False&~ck=anav
ATI 32MB Radeon 7500, v. 7.70.9-02604a, A02

Read other 9 answers
RELEVANCY SCORE 53.2

I'll buy a dell optiplex 755 dt in about a week featuring a xeon x3363, my question is: where can i find the drivers for the motherboard that work on windows 10? The drivers on the official site don't support win10.I'm new please help me out.

A:Dell Optiplex 755 dt drivers on windows 10 after clean installation

The 10 year old Optiplex 755 series was never validated or tested by Dell for Windows 10. Which is why the Optiplex 755 driver page only list XP and Vista.

Read other 2 answers
RELEVANCY SCORE 53.2

Hi,

After much hesitation I finally decided to "upgrade" my system to Windows 10 after much Microsoft nagging.
However, after this upgrade I no longer see anything of the regular Dell services that check my computer for optimal performances. I have another year or so of support but when I tried to log in I did find one service question I got answered some months ago which basically verifies my account and at least the 9020 (I also have an older registered Latitude 6400 desktop) but no way to know how to get back to my original status. In fact I received an email saying "Thanks for creating your Dell account" (in Dutch) which only seems to indicate that something is terribly wrong.

What must I do? Try and reverse my upgrade to Windows 10 and move back to Windows 8.1 ???
I went to the place where I supposedly could download the factory installed software for my optiplex 9020 but somehow I never got beyond the stage of trying to update my password. No matter what I typed in,the screen came back with the same fill-in bit to change one's password. After half a dozen different tries I gave up.

But I do want my link to Dell back, I loved the regular checkups of my system that now seem eliminated by upgrading to Windows 10. Please help??? 

Read other answers
RELEVANCY SCORE 53.2

Hi,
I am trying to create a windows 7 image to the new PC's that we have just purchased. On boot after pxe network boot I get the message "Please add the network driver to the windows PE image on Windows Deployment Services." I have added many drivers to WDS with no luck and the correct one from the dell website errors and will not let me added it. I have the packaged the drivers into the install.wim and boot.wim using the AIK but still no luck. The drivers from the dell website do not seem to work in the PE environment. I'm hoping that someone has done this before and can point me to the correct driver. I have been looking for the best part of two weeks and i'm sure it can't be this hard.
Thanks in advance!

A:Dell Optiplex 3040 SFF cannot PXE boot windows 7 image

Hi Ihint,Thanks for posting.Please see this YouTube video for assistance:  http://dell.to/2tMiDOH

Read other 1 answers
RELEVANCY SCORE 53.2

Hello! We have Dell Optiplex 9010 Web cam problem after Windows 10 upgrade, service tag 2xm8f2s, after Windows 10 upgrade, the system does not see integrated web camera. I can't see at device manager, as well i could not find  any drivers.. for camera
We did dell diagnostics it doesn't show anything.

Read other answers
RELEVANCY SCORE 53.2

Hi,
We ordered and received 4 new OptiPlex 7440 AIO All-in-One computers without Windows installed - only Ubantu is installed.  The desktops do not have a built-in optical drive.  I get the following error message when I try to install Windows 7: "A required CD\DVD drive device driver is missing.”  I tried using an external optical drive and USB boot device to install.  I am also plugged into the USB 2.0 ports and not the USB 3.0.  I tried many of the suggestions Google has provided me, but none of them are working.  I'd appreciate any help.
FYI, I called Dell Support twice about this issue.  The first technician hung up on me when he realized he didn't know what to do to help and the second technician said I had to pay $89 for help.  When I asked to speak to her supervisor, she hung up on me. Since Dell likes to rudely hang up on their loyal customers, I'm hoping the community will be more helpful.

A:Dell OptiPlex 7440 AIO - Will not install Windows 7 Professional

I figured this out.  I added the necessary drivers to the boot file and I was able to install windows.

Read other 2 answers