Over 1 million tech questions and answers.

Can't upgrade Windows 7 SP1 Pro to Windows 10; PC is joined to a domain. Contact your system administrator.

Q: Can't upgrade Windows 7 SP1 Pro to Windows 10; PC is joined to a domain. Contact your system administrator.

We've been having some problems upgrading some Windows 7 SP1 to Windows 10. The PCs are joined to a domain on different client networks, and when going through the Windows 10 Upgrade Assistant, the error comes up and says 'Windows 10 will not run
on this PC.' The reason it says it will not run is because the PC is going to a domain and to contact your system administrator. Has anyone run into this problem or have any ideas on how to resolve?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Can't upgrade Windows 7 SP1 Pro to Windows 10; PC is joined to a domain. Contact your system administrator.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 84.8

Windows 10 Pro can not be joined to domain. Network path was not found error was coming every time. Windows firewall is disabled.Workstation, computer browser, RPC Locator, Netbios helper service is started. Please do the needful ASAP.

Read other answers
RELEVANCY SCORE 83.6

I have some computers in my network with windows 8.1 professional installed; after joining those computers to domain and if the user is with (deny removable sotrage read/write access) group policy applied; the user gets deny access on all disk drives except
the system one.
if the user can access the removable disks he can access all disk drives.
any explain or solution for this weird issue?!!!!!!!!!!!!!!!!!

Ola

Read other answers
RELEVANCY SCORE 82.8

Having trouble disabling pin sign on for our domain joined machines.

it just doesn't seem to work, I have tried using the registry tweak and GPO policy.

Can someone help please?

Firaz

Read other answers
RELEVANCY SCORE 82

Hi

I recently joined my HP Envy Recline 27 k210na which was upgraded to windows 10 to a Windows 2012 R2 Domain. But have an issue.

Once I login with a user account, domain or non domain, I am unable to use the fast user switching. When choosing to switch account, I will be taken to the login screen, and when I select 'Other' to login with another account, it takes me to the existing user's password entry screen.

If I sign out, and select 'Other' to login as a different user, I get the same issue. I have to reboot the machine to be able to login with another user account.

I restored the pc to factory defaults and upgraded again, then rejoined the domain, but the problem is still there.

Please help

A:Domain Joined Windows 10 - Fast User Switching

When signing in to a Windows PC which has joined a domain with other than a domain account, you need to use a so called full username (ComputerName\UserProfileName).


In above screenshot example I simply replaced the default domain username with the credentials of a local account using the full username and can now sign in using those credentials.

Clicking the link How do I sign in to another domain shows these instructions:



Kari

Read other 0 answers
RELEVANCY SCORE 82

Hello,

I am using a domain-joined laptop with Windows 7 Professional at work. Now I am trying to integrate it into my home network (which consists mainly of a Windows XP Professional SP3 desktop).
After enabling a guest account and sharing on the WinXP machine, I am able to access shared folders on the WinXP desktop from the Win7 laptop (which is not too bad).

However, I was not able to access shared folders on the Win7 laptop from the WinXP PC, not even after enabling all advanced sharing features and disabling the firewall. Both using the computer name \\HAL and the IP address \\192.168.0.100 gives me a "Windows cannot find..." error. Pinging the Win7 laptop works though.

I wouldn't like to leave the domain to join the local workgroup and am not desperate enough for a dual boot installation or other major work-arounds I have come across (especially since sharing the other way around works). But maybe some of you guys have a suggestion what else I could try.

Thanks a lot for your help.
 

Read other answers
RELEVANCY SCORE 81.2

I have a domain joined machine Windows 7 professional ..
How can I reset it to be as new one first time installed and make users recreate their profile again and new Desktop while logging in the domain..

Read other answers
RELEVANCY SCORE 81.2

Hello,

I have windows 8.1 computers in the domain and all users are set in to the power users group for security.
just like the old times Windows XP to prevent them from installing programs.. etc

but on windows 8.1 its different .. they have to be in the local admin group to share folders and this is very strange really.

i tried searching here and there but now luck .. i tried to look in the group policy with no use.

is there a way to let power users to share folders on domian joined windows 8 pcs? 

Read other answers
RELEVANCY SCORE 81.2

Hi All,
We have developed the windows 8.1 store app using xamarin.
1.Try to install the appx in the windows 8.1 tablet using powershell
2. Its asking the developer license to install the application in the tablet.  
We want to install the appx package in windows tablet without developer license prompt(Because it is enterprise application and domain joined) and want to use the SCCM App distribution in future.
Note: We referred an MSDN reference about side-loading and Product key activation for APPX installation on Tablet. which states Purchasing Side-loading product key is cost $100. we would like to know more licensing details about it.   

Read other answers
RELEVANCY SCORE 76

Hi,

Would someone please be able to assist me with this problem? I keep getting the "Windows - No Disk. Please contact System Administrator" problem on my PC. Usually a reboot solves this but it creeps up after time again.

I ran a HijackThis system scan and here is the log...

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 1:01:12 PM, on 2007/03/21
Platform: Windows XP SP2 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Ahead\InCD\InCDsrv.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\Network Associates\VirusScan\Mcshield.exe
C:\Program Files\Network Associates\VirusScan\VsTskMgr.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\NALNTSRV.EXE
c:\Ora920\bin\omtsreco.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\wm.exe
C:\NOVELL\ZENRC\WUOLService.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\System32\dpmw32.exe
C:\WINDOWS\system32\NWTRAY.EXE
C:\Program Files\Network Associates\VirusScan\SHSTAT.EXE
C:\Program Files\Network Associates\Common Framework\UpdaterUI.exe
C:\Program Files\Common Files\Network Associates\TalkBack\TBMon.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOW... Read more

A:WIN XP: "Windows - No Disk. Please contact System Administrator" error

They are going to tell you to get the old version of HJT, 2.0 is in BETA. Get the older version here:

http://www.pcworld.com/downloads/file/fid,23258-page,1-c,downloads/description.html
 

Read other 2 answers
RELEVANCY SCORE 74

I am trying to add a win 7 pro pc to a domain and I get this error " an attempt to resolve the DNS name of a domain controller in the domain being joined has failed"
I am running win server 2003 can anyone help?

A:error an attempt to resolve the DNS name of a domain controller in the domain being joined has failed

Ok I got it to work I put in the DNSserver address agine same as I did yesterday ( I must have put it in 3 or 4 times) and it din''t work I did it agine today and it worked the frist time. Thank you every one for your help
 
Derrick

Read other 13 answers
RELEVANCY SCORE 73.6

hi,

when i add win 7 client machine to a domain i got this error " an attempt to resolve the DNS name of a domain contrller in the domain being joined has failed" how to solve it . plz help
 

Read other answers
RELEVANCY SCORE 72.8

Hi,

I have a domain joined windows 7pro (64bit) not able to connect to shared folder on a non domain joined pc with windows 7pro (32bit). Only public folders are accessible. I get a do not have permission message, I tried adding the domain\user to share permissions but domain is not recognized on the non domain-joined pc.

Does my domain admin have access to the homegroup and the shared folders on the home pc?

What are my options for access to a non public secure folder on the non domain pc from the domain joined pc.


Sorry for the awkward description, don't know how else to describe the situation.

my apologies if these questions were addressed elsewhere, I could not find any relevant threads.

Thanks

A:Domain joined pc, does domain admin have access to my homegroup

Hi Takatso, welcome to sevenforums. As I read you post, it looks like you are logged into your domain joined PC as a domain user is this correct? If so, your PC will be treated as acting as a part of the domain. If you then try and connect to another pc at home, there will be a problem as your home pc is not recognised by the domain pc as part of the domain. You should set yourself up a user account on the domain pc whilst it is NOT connected to the domain, login to the new account whilst not on the domain and then try sharing the folders with the non-domain pc.

No, your does not have access on the home computer as they are part of the domain and not the homegroup.

Read other 1 answers
RELEVANCY SCORE 72.8

I am trying to added a printer on a windows 7 machine. When i add new printer and select from the list i get this error.
Connect to Printer.
A policy is in effect on your computer which prevents you from connecting to this print queue. Please contact your system administrator.

I have tried adjusting the Group policy setting and registry as suggested in this article. http://support.microsoft.com/default.aspx?kbid=319939&product=winsvr2003
I can manually add the printers via the ip address of the printer, but cannot from selecting them from the available printer list.
Any suggestion to resolve this issue.
 

 
 

A:When trying to add a networked printer i get this error. On windows 7 Profeesional machine.__Connect to Printer.__ A policy is in effect on your computer which prevents you from connecting to this print queue. Please contact your system administrator.

Hi,
 
I would like to suggest you configure the following policies in your default domain policy. After configuring the policies you should run the command:
gpupdate /force.
 
 
User Configuration\Administrative Templates\Control Panel\Printers\
 
Point and Print Restrictions >>
Disable
Prevent addition of printers
>> Disable
Prevent deletion of printers
>>
Disable
 
 
Local Computer Policies\Administrative Templates\Printers\
 
Allow print spooler to accept client connections
>> Enable
 
If the issue persists, you may also refer to the following link to troubleshoot this issue:
http://support.microsoft.com/kb/888046/en-us
 
Does it work?
 
Regards,Arthur Li - MSFT

Read other 2 answers
RELEVANCY SCORE 72.4

I intentionally disallowed a file from running using Security Configuration Management in Windows 8.1 Pro. However, each time it tries to run, I get an error message: "Your system administrator has blocked this program. For more information, contact
your system administrator."
Can I disable this warning for just that file, or is there only an option to globally disable this error message and if so how?
I still do want to block the file, but don't want to be told *every time* it tries to run, that it has been blocked.

Read other answers
RELEVANCY SCORE 70.4

I am at my wits end, any help would be appreciated.

I have two computers:

LOFT
mapped network drives M, N, O

BEDROOM
mapped network drives P, Q, R

if i am on the LOFT computer i can see all mapped network drives, M,N,O,P,Q,R

if i am on the BEDROOM computer i can see mapped network drives P,Q,R but not M,N,O
i click on M,N,O and it comes up with a windows asking for login and password and states the following,
"the system cannot contact a domain controller to service the authentication request,
after I type in the info I can then see the drives

any clues as to what is going on?

thanks

A:system cannot contact domain controller

Are both machines Windows 7 or 8?

Setting up a Homegroup may help with the drive access problem.

You could also try adding Authenticated or Everyone to the permissions on the Security tab of the drive but messing with the NTFS permissions would be a last resort for me.

This could also be an ownership problem but having to take ownership is a bit more extreme.

Read other 9 answers
RELEVANCY SCORE 70

Hi im running windows 10 32bit I have 6gb of ram and it only shows i have (2.99) out of (6)Gb any idea how to fix

A:Hi I got windows 10 finally and joined i just joined ;)

Originally Posted by Briguy


Hi im running windows 10 32bit I have 6gb of ram and it only shows i have (2.99) out of (6)Gb any idea how to fix



32 bit can only see 4GB Max. You'd need to install 64bit version.

Read other 0 answers
RELEVANCY SCORE 69.2

Hello
today when i went on youtube on my laptop i wanted to watch myth fortnite but nothing came up it sais restricted mode has been enabled. I went on youtube help and it said this : 


Restricted Mode



Restricted Mode hides videos that may contain inappropriate content that is flagged by users and other signals. No filter is 100% accurate, but it should help you avoid most inappropriate content.



Restricted Mode is enabled by your network administrator.
How do i do this?
Please reply ASAP

Read other answers
RELEVANCY SCORE 69.2

I subcribe to Windows 7 News letter and others, Now all of a sudden I cannot open from the e-mail content, it reads: This operation has been cancelled due to restrictions in effect on this computer, please contact your system Administrator. Whats all this about, I am the system Administrator. Can anyone please help. ( Win 7, ) Thank you Peter, Winchester.

A:Please contact your System Administrator ?

  
Quote: Originally Posted by Flashy1941


I subcribe to Windows 7 News letter and others, Now all of a sudden I cannot open from the e-mail content, it reads: This operation has been cancelled due to restrictions in effect on this computer, please contact your system Administrator. Whats all this about, I am the system Administrator. Can anyone please help. ( Win 7, ) Thank you Peter, Winchester.



Flashy

What is your network setup? Are you on work network? or home?
Ken J+

Read other 5 answers
RELEVANCY SCORE 69.2

Everytime I try to click on my Control Panel or change the screen size on my computer I get "This operation has been canceled due to restrictions on this computer.Please contact your system administrator." The problem is that I am the system administrator.It's my home computer.So I tried logging off and I clicked on Compaq Administrator which is the only user account on my computer.It did the same thing.I tried to make another user account and make that administrator but I can't use control panel to do so.Can someone please help me.

Read other answers
RELEVANCY SCORE 69.2

When I want to open a folder ,it says operation restrictions in effect to this computer.I dont know how to contact system administrator to open these files and folders!

A:To contact System administrator

If it's your computer then it has likely become infected. If it is a work PC or a school PC you will need to contact the IT dept for assistance.

If it is your PC and you think are you infected we recommend that you read this article…
"NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help"; follow the instructions very carefully; then, post all the requested logs and information; as instructed, in the Virus/Trojan/Spyware Help section of the forum.
(Simply, click on the coloured links to be re-directed.)

Please ensure that you create a new thread in the Virus/Trojan/Spyware Help Forum; not back here in this one.

When carrying out The 5 Steps, if you cannot complete any of them for whatever reason, just continue on with the next one until they are all completed.
However,it is extremely important to make mention of the fact that you could not complete any of the steps in your post to the Virus/Trojan/Spyware Help Forum; where an Analyst will assist you with other workarounds.

Once done, please be patient, as the Security Team Analysts are usually very busy; one of them will answer your request as soon as they can.

After your system has been verified as clean, if your are still experiencing those problems come back here and we will assist you further.

Read other 1 answers
RELEVANCY SCORE 69.2

Hi,
I am trying to install McAfee VSE 8.8 Patch 9 setup and getting "This installation is forbidden by system policy. Contact your system administrator." error during the installation. Installation fails
I have followed the below steps and did not help
Method 1 : 
1. Click Start on the Windows taskbar, and then click Run. 
2. On the Run window, type gpedit.msc, and then click OK. 
3. On the Group Policy window, navigate to Local Computer Policy, then Computer Configuration, then Administrative Templates, then Windows Components, and then Windows Installer. 
4. Double-click Prohibit non-administrators from applying vendor signed updates. 
5. Click Disabled, and then click OK. 


Method 2:
1. Click Start -> Control Panel 
2. Open Administrative Tools 
3. Open Local Security Settings 
4. Click Software Restriction Policies 
5. If no software restrictions are defined, right click the Software Restriction Policies node and select New Software Restriction Policy 
6. Double click Enforcement 
7. Select "All users except local administrators" 
8. Click OK 

Method 3:
start > run regedit
Browse the registry to HKLM\Software\Policies\Microsoft\Windows\Installer
Create: DisableMSI       Type: REG_DWORD  value = 0   (0 should allow you to install it was originally 1) 
(In my case the value had been set to 2 so I changed it to 0)

Method ... Read more

Read other answers
RELEVANCY SCORE 69.2

Hello
i am using internet i am getting error..
pls find attached .jpg

shafique.cheena

A:a virus was detected originating from your system please contact the system administrator

Hi Shafique,
Your computer is infected by virus.
Install and run Antivirus software to remove it.
However; there a few steps you should perform before AV.
1) boot up th Windows in Safe Mode
2) Delete all temp files from %username%\AppData\Local\Temp
3) Open CMD command and type: ipconfig /flushdns
BartBartosz Kurowski Solution Engineer MCP, MCT, MCTS, MCITP, MOS 2007 / 2010

Read other 9 answers
RELEVANCY SCORE 68.4

Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

File: \Boot\BCD

Status: 0xc000000f

Info: An error occurred while attempting to read the boot configuration data.Recovery

Your PC needs to be repaired

The Boot Configuration Data for your PC is missing or contains errors.

File: \Boot\BCD
Error code: 0xc000000f

You'll need to use the recovery tools on your installation media. If you don't have any installation media(like a disc or USB device), contact your system administrator or PC manufacturer. I need you help as I don't have a recovery CD because I updated Windows 8.1 (in my computer packaage)  to Windows 10 .Thanks in advance.Best rgdsRoland

A:contact your system administrator or PC manufacturer.

Turn your computer off.Turn your computer on, and immediately tap/tap/tap on the 'F8' key.Hopefully, you will see a "system repair" menu, and there will be an option to "repair" your system. 

Read other 2 answers
RELEVANCY SCORE 67.6

Windows Vista Home Premium, How can I turn off group policy, If I try to run defender or change startup programs, it will not allow me. Message to contact your system administrator to turn off group policy.  Please help

Read other answers
RELEVANCY SCORE 67.6

I cant open many programs because it says -access is denied-contact system administrator, but each time it tells me that it is blocked by group policy.I cant open system restore for this reason or get commands to work-- they all come up with access is denied.
Dont know what else to try & cant find any solution in the forums.
I am a relative beginner & would appreciate any help & advice here
Thanks
traumax

A:Access denied-contact system administrator

First of all are you an Administrator on the PC?

Is your PC part of a business domain?

What Antivirus do you have running?

If it is possible for you to do so run Malware Bytes' Antimalware (|MG| Malwarebytes Anti-Malware 1.46 Download)

Oli

Read other 9 answers
RELEVANCY SCORE 67.2

hello,

After I joined a domain , I lost my wall paper, desktop settings ,IE favorites ,etc...

I guess that would be considered my profile that was lost ?

Is there a way to copy my old profile to my new one

or a way to get my old settings back ? and stay on the domain of course.

Windows XP is my OS

thanks
 

A:joined a domain

All user settings are in folders under "C:\Documents and settings\user name". Your domain user name will be your name with the domain postfixed to it (divided by a period). For example, NAME.DOMAIN

If you know your old username, you should be able to just copy all the files and folders from under "C:\Documents and settings\Old Name" directly into "Documents and settings\New Name".

It would probably be a good idea to backup the current folder of the new name first just in case also.

-niko
 

Read other 2 answers
RELEVANCY SCORE 66.4

Hi Guys,

Apologies if this has been answered before ...

I have 5 pc's at home all running Win 7 Ultimate. 1 of the PC's (my laptop) is joined to my works domain.

The problem I am having is I can't get it to join the Homegroup when I am at home.

all I really need to be able to do is to access folders on each of the other pc's as and when needed (full access)

Is there any way to resolve this?

Many thanks for any help you can offer.

Paul

A:Homegroup and Domain Joined PC

This page covers it pretty well. There are a couple of different methods you can use.

Note If your computer belongs to a domain, you won't be able to share files and printers with a homegroup, but you can still access files and printers shared by others.

Switching between your home and workplace networks

Read other 1 answers
RELEVANCY SCORE 66.4

I'm having the same 'issue'. I've been told to try and find a way to have the computer boot to the login screen and display a specific user name, not necessarily the last user name to log in. For some reason(s), the extra clicks it takes to switch users or leaving the default account blank is not acceptable, so I'm also trying to find a way to do what vao wants to do. Any ideas? Someone tried the HKLM\Software\Microsoft\Windows\CurrentVersion\Authentication\LogonUI
LastLoggedOnSAMUser = Computername\username (or domainname\username for a domain account)
LastLoggedOnUser = .\username (or domainname\username for a domain account), but apparently it didn't work.

I'm going to give it a shot of mine own just because, but any other ideas?

Thanks

A:I'm in the same spot, but I am joined to a domain.

When Windows boots normally to the login screen it shows the available user accounts in alphanumerical order according to the respective user profile's original name. A later username change does not change this order, to change it you have to rename not only your username but also the user profile folder. Only renaming the user account still keeps the original user profile folder. In Windows 7 for example old username Alex changed to Xavier, user Xavier would still have his user profile in C:\Users\Alex.

Available user accounts are presented (Windows 7) in one (1 to 5 accounts) or more (6 or more accounts) rows. Windows defaults to the left most (top left when 6 or more accounts) user account, in other words the first in alphanumerical order. In Windows XP the accounts are presented in one column, defalting to the top most account.

This should be considered when you install Windows. If it is important that Windows always pre-selects (defaults to) a certain account, you need to give it a name which certainly remains alphanumerically first. I recommend using numbers in addition to names.

An example: Your goal is to have 1 administrative user, account name Admin, and 2 standard users named Bubba and Charlie. By default Windows 7 would show these accounts in alphabetical order, Admin, Bubba, Charlie. However, you'd like accounts to be shown as Charlie, Admin, Bubba, showing the account Charlie first and defaulting to it.

The first account you create when finalizing Windows 7... Read more

Read other 5 answers
RELEVANCY SCORE 66.4

How can I resolve this problem? I am unable to make any changes or restore a deleted folder. Thank you

A:This program is blocked by group policy. Contact your system administrator

We need more info, please.

Read other 10 answers
RELEVANCY SCORE 66.4

How can I resolve this problem? I am unable to make any changes or restore a deleted folder. Thank you

Read other answers
RELEVANCY SCORE 66.4

Hi guys,

I was wondering if anyone could help.

I have a user who is getting the below message when trying to open Archived Emails.

"unable to perform operation due to a system error please contact your administrator"

I work on a Service Desk and am looking to resolve this as a first time fix. I know there is someway to resolve it but it has slipped my mind.

I have had no look on google either.

Any help is greatly appreciated.

Thanks

A:unable to perform operation due to a system error please contact your administrator

We need more information. Is the user on a Domain? Or are they a home user? If on a Domain, are they using Exchange? Is the user an Admin user or just a limited user? What is the Email program (eg) Outlook Express or Outlook (what version?) Is the Archived Emails stored locally on the machine? Or is it on a network drive. Is it accessible from the Exchange server? Can you access the file from web mail? If using Outlook, is the Archived Email a Data File that is imported in as a Personal Folder in Outlook?

Read other 1 answers
RELEVANCY SCORE 66.4

windows 7 32 bit fully updated.
yesterday i tried to install a companion program to my Lorex Video surveillance system that uses Flir Cloud to live view my in home security system.
It is a video player made by the same company to view locally the downloaded video files from my security DVR( .dav format). ive downloaded the exe directly form their website, it also auto downloads if i allow it and dont already have it installed( the .exe) when i download a video file to my PC. Issue: When i click it to install it i get a windows dialog box that says "" (path is C:\Users\Admin\AppData\Roaming\SPTemp\Smart Player.exe) (File name changes but rest of path is the same depending on which file i try to run). ( this is a home PC of which i am the administrator.)
 
this happens using and administrator level windows account(and/or if i right click and "run as administrator) and it happens whether i use the file i directly downloaded form their site or through the software.
i spoke to their tech support and they have no idea. Ive googled a couple times but i am leary of deleting entire registry folders. Can someone explain more clearly why this is happening, and how to resolve it without compromising anything else in the system?

A:This program is blocked by group policy, contact your system administrator for f

still preprexed by this issue, someone suggested that cryptoprevent may be causing the issue( which i have installed and updated)

Read other 1 answers
RELEVANCY SCORE 65.6

Hi,

A bit of an odd one this - all of a sudden, as many as 30 computers have suddenly had credentials problems and are failing Group Policy processing as a result. What I mean by this is that they are throwing errors in Event Viewer such as "Unable to resolve
hostname", and the only solution is to open the Stored Names and Passwords manager under the SYSTEM account via PSEXEC and binning off the credentials for the domain controller.
The only leads I could find on this referred to expiring Kerberos tickets, although the setup at this site (I believe) has the default Kerberos policies set under Default Domain Policy. I have checked, and other sites with the exact same policy setup do
not have this issue, so I am reluctant to believe it is the Kerberos policy.
Any other ideas or leads would be appreciated, I'll be happy to expand on this question if any more details are necessary.
Cheers,


Rory Fewell
(CCNA, MOS)
Windows Server 2012 and Networking Fundamentals Apprentice
Visit my site!
View me on GitHub!

Read other answers
RELEVANCY SCORE 65.6

Hello all,

I've just spent the last day and a half reading forums, but no-one seems to have had the same problem as I have.

We've just bought a new vista business x64 machine to add to our existing network. All the other machines are running xp pro sp2. I've added the vista machine to the domain and logged in using my domain id. In the 'Network' folder I can see all the other machine names. So far, so good.

If I try and access one, however, I get one of two things:
1. A dialog asking for username and password. It doesn't accept anything I type in.
2. An error message saying the account is locked.

I can ping any of the xp machines, by name or ip and get a response ok.

Trying to access in the other direction, all is fine. From an xp machine, I can access any folder on the vista machine, make changes, everything. I've installed LLTD on one of the xp machines, so it appears on the full map thing, otherwise it has made no difference.

All folders have been set to 'Everyone full access'.

Any ideas?

A:Vista machine not joined xp domain

Have you tried this:- Workgroup Password

Read other 3 answers
RELEVANCY SCORE 65.6

I've joined our corporate domain fine, but every time I try to log in, I get the following message:"You have been logged on with a temporary profile.  Try logging in later...I've tried to find any tpoics regarding this and found none.  Anyone seen this or have any ideas to rey.  I've unjoined and rejoined the domain several times to rule that out, and can get nothing to change.  Thanks,

A:Domain joined but trying to log on gives temporary profile only

Hi,
 
I haven?t encountered similar issue. However, you can refer to the following KB to troubleshoot the problem.
 
A temporary profile is loaded after you log on to a Windows Vista-based system
 
Hope it helps.

Read other 29 answers
RELEVANCY SCORE 65.6

Hi,
I am unable to ping/remote desktop/access shared drives to a XP machine after it joins the domain. I removed it from the domain, everything is fine. I disabled anti-virus program, no luck. Firewall setting is from the GPO. Other computers in this domain
are fine.
DNS, DHCP match the computer IP. When I ping it, I got 4 "Request timed out" reply.
Please advise!
Thanks in advance!

Grace

Read other answers
RELEVANCY SCORE 65.6

 I am a windows 7 starter user. I have a microsoft office 2010 currently installed and whenever I try to check for updates it always shows the same error.

Read other answers
RELEVANCY SCORE 65.6

This operation has been cancelled due to
restrictions in effect on this computer. Please contact your system administrator. This error occurred in user's profile. Neither open group policy nor Registry, not perform any one operation. Please help.

Read other answers
RELEVANCY SCORE 65.2

PCs are Win 7 Ultimate, All are joined to the Domain
Domain Controller, DNS, DHCP Server (on same instance) is Server 2012 standard
The network topology is like this: Router as Internet Gateway>Switch>Wired to Server and PC's, SIP phones, and Wireless Access Point all on same subnet. DNS and DHCP have been offloaded to Server Roles and switched off on the router.
All of the PCs have network cards that have joined the domain network at least some of the time since I set them up.
Some of them have always picked up the domain network and continue to this day.
Some of them intermittently pick up the domain network and other times join whatever other unmanaged network is available.
Some of them have stopped picking up the domain network altogether and will, no matter how many times their NICs are restarted, always join a non-domain (unmanaged) network.
When the NICs are not joining the domain, they are unable to ping hostnames of any devices on the network but nslookup of the hostnames usually works. The DC, DNS, DHCP server's IP can be pinged without issue, ipv4 or ipv6.
I am recording DNS Client Errors (ID 1014) on all of the PCs during the intervals when their NICs are identifying which network to join.

-On the PCs that are catching the domain network I am only getting a single error about the root domain, eg the domain is ad.domain.com and I am only getting errors about how the configured DNS servers cannot resolve domain.com (nothing with fully qualified
do... Read more

Read other answers
RELEVANCY SCORE 65.2

Hi everyone , could this be a policy , or do I have to unjoin the computer from domain?

Thank you

A:Reset this PC does not show on domain joined computer

I believe that a policy could prevent this. Anything that drastic should be preventable by group policy. Talk to the IT staff.
Be aware that only a domain administrator can rejoin a computer to the domain.

Read other 1 answers
RELEVANCY SCORE 65.2

Hello,
I'm deploying Win 10 Enterprise on standalone machines using MDT and trying to enable Bitlocker during my deployment to encrypt OS drive (the only partition I have), TPM is enable in BIOS, and i'm trying to store recovery keys on the deployment share, here
is my cs.ini :
SkipBitLocker=YES
BDEInstall=TPM
BDEInstallSuppress=NO
BDEDriveSize=300  ------- i tried 2000 as well ---
BDEWaitForEncryption=False
BDERecoveryKey=AD
BDEKeyLocation=\\SERVER\DeploymentShare\Recoverykeys 
TPMOwnerPassword=XXXXX ------- tried with and without this line --------
I left the BitLocker step enable in TS (default).
the deployment is finishes and never initiate the encryption.  
hint:  enable Bitlocker manually is working fine.
Machines are Intel NUC kit. 
Any ideas ?
thanks in advance. 

Read other answers
RELEVANCY SCORE 64.4

so im trying to update my windows 7 laptop but when i go to check for updates it saids i cant because it is controlled by the system administrator but theres only one account on the laptop and it is said as the administrator any help on this would be greatly
appreciated.

Read other answers
RELEVANCY SCORE 64.4

Having problems with a long time to login to the domain (server is Windows 2008.)  Login takes 7 to 15 minutes for one user's profile and only 6 seconds for the administrator. The system is an HP 4520s ProBook running Windows 7 64 bit, 4 Gb RAM, Intel
i5 CPU M460 @ 2.53 GHz. This is a new Win 7 laptop deployed about a week ago.
Ran MSCONFIG and disabled all non essential apps. User also had the desktop background set to point to multiple photos for a background slideshow.  Changed it to the standard Windows 7 background, which takes login time down to about 2 to
4 minutes.  The administrator and other logins for other users on this machine take only 6 to 30 seconds. 
Any ideas?

A:Windows 7 64 bit, domain login takes 7 to 15 minutes for one user's profile and 6 seconds for the administrator.

Hi Caro Boyd,
Thanks for the post!
In order to figure out which took a long time during the boot ,I recommend you use the
Process Monitor. Check which took the long time after winlogon.exe started.
Regards,
MiyaThis posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Read other 3 answers
RELEVANCY SCORE 64.4

I would like to configure ATA to be in a work group and external to the monitored domain. Not having SEIM I plan to use ATA to collect the events using eventlog forwarding. In the documentation, it is mentioned that the domain controllers and ATA gateways
are connected to the same domain. So is my desired configuration of an ATA workgroup outside the domain not possible ?
thanks for any information


Read other answers