Over 1 million tech questions and answers.

Display Brightness key stopped working (Solved)

Q: Display Brightness key stopped working (Solved)

Hi everyone,
About a week ago, my laptop's brightness key stopped working.
It's not a hardware problem because if I try changing it from control panel I fail. Brightness icon disappeared into windows 10 home x64 1151 as well as control center.
I tried reinstalling both Intel and Nvidia drivers.
the machine is an Acer E5-571G-50NS upgraded to Windows 10 about a year ago.
Thanks in advance,
cheers!

RELEVANCY SCORE 200
Preferred Solution: Display Brightness key stopped working (Solved)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Display Brightness key stopped working (Solved)

When you say you 'fail' changing brightness in the control panel do you get an error message, what do you mean?

Is your PC fully up to date with Windows Update?

Read other 8 answers
RELEVANCY SCORE 87.6

Hi everyone,
About a week ago, my laptop's brightness key stopped working.
It's not a hardware problem because if I try changing it from control panel I fail. Brightness icon disappeared into windows 10 home x64 1151 as well as control center.
I tried reinstalling both Intel and Nvidia drivers.
the machine is an Acer E5-571G-50NS upgraded to Windows 10 about a year ago.
Thanks in advance,
cheers!
 

A:Display Brightness key stopped working

When you say you 'fail' changing brightness in the control panel do you get an error message, what do you mean?

Is your PC fully up to date with Windows Update?
 

Read other 4 answers
RELEVANCY SCORE 85.6

Upgraded to windows 10, then my screen brightness stopped working. All drivers are up to date, all display drivers are activated.

Read other answers
RELEVANCY SCORE 69.2

The dispaly brightness buttons on my Elitebook 1040 G2 (F9, F10) stopped working, perhaps with an update but not sure.  I have installed the latest Windows updates and graphics driver, run scannow, DISM, to no avail.  Anybody have a suggestion? OK, I solved it.  I installed the latest HotKey support drivers, which I saw suggested in a recent thread for a different model, and that fixed the issue.

Read other answers
RELEVANCY SCORE 67.6

Resolving Problems with the Brightness of the Display. Installing the latest graphics drivers can resolveBrightness issues. Updated video driver automaticly.

Read other answers
RELEVANCY SCORE 67.6

Other hotkeys work normally, both brightness up/down keys stopped working (did not update or make changes)

A:brightness hotkey stopped working

Hi,I don't know which processor/graphic is installed in your notebook.You can try downloading, save and install the appropriate graphic driver for your notebook:Intel:http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7815290&swItemId=ob_176908_1&swEnvOid=419...AMD:http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7815290&swItemId=ob_177365_1&swEnvOid=419...Restart system.RegardsVisruth

Read other 2 answers
RELEVANCY SCORE 67.6

The brightness control keys (f2 & f3) on my pavillion dm4 stopped working all of a sudden. I'm operating windows 7 64bit. I've tried reverting to previous system restore points. I've also installed the BIOS, Intel chipset, and graphics drivers. All the other function keys are working properly, just can't change the brightness. Right now it's stuck on the brightest setting.I hope someone can point me in the right direction to solve this issue, I'm getting terrible eye strain from the screen.Thanks











Solved!
View Solution.

A:Brightness Controls Stopped Working - dm4

@Rico i found out how to fix it.. trial and error... go to device manager and click on your graphics driver.. and uninstall it... reboot computer... if you have win 7 it should install the updated grappics driver automaticly.. if not go back to device manager.. and go to the new device which isnt installed.. update it.. and restart computer.. then brightness controls will work.. sorry if i rushed through instructions..  reply back if you need more specific onees

Read other 10 answers
RELEVANCY SCORE 66.8

I was able to adjust the brightness of my screen using the f2+f3 button but suddenly they stopped working and am not able to adjust the brightness of screen from any place neither control panel nor any other option tried some methods but they all failed

A:Screen brightness buttons stopped working

Hi, Try the following. Download the Intel HD Graphics installer on the following link and save it to your Downloads folder. http://ftp.hp.com/pub/softpaq/sp68001-68500/sp68117.exe When done, download and reinstall the Chipset driver on the link below. http://ftp.hp.com/pub/softpaq/sp73501-74000/sp73543.exe When the Chipset reinstallation has completed, do not restart as prompted, instead open your Downloads folder, right click the Intel Graphics installer and select 'Run as Administrator' to start the installation. When this has completed, shutdown the notebook. Unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter. Start the notebook and let Windows fully load for a few minutes before checking. Regards, DP-K 

Read other 1 answers
RELEVANCY SCORE 65.2

Hey guys, so I upgraded to Windows 10 which caused the computer to automatically update my drivers and what not on July 29th, and here I am with a brightness adjustment that does not work whatsoever. Pretty much, whenever I press the less/more brightness buttons on my keyboard, the display will show the brightness gauge going up/down but the actual screen brightness remains constant. Yet, when I roll back the driver it manages to allow my brightness adjustment to function again, but my second monitor will not connect even though it is plugged in via HDMI. Obviously attempting to get my old Windows 8 driver will do me no good since this laptop is no longer a Windows 8. I'm pretty stumped here, especially since I'm not the best with the complex side of computers, I'd just like my brightness adjustment to work again while maintaining/keeping everything else Thank you in advance for your help

Read other answers
RELEVANCY SCORE 58.4

hey people, im new here so b gentle haha

basically, ive been using 2 displays, a 17" lcd monitor and my 40" samsung hdtv.
i use my 2nd display(TV) for when i watch films on my pc, then select back to normal single display once i have finished(it annoyed me the pointer would go off screen onto the 2nd display when i wasnt using it) and it was working fine like this for ages, then 1 day i activated 2nd display as normal, but it wouldnt reconise it what so ever.

ive tryed reconnecting all the wires etc but it still doesnt reconise the 2nd display??
all i can think is maybe some kind of update has changed settings and made it not reconise it?

and help would b greatly apprieciated?
thanks
jingle
x

A:2nd display stopped working?

hello, and welcome to the forums!
maybe you could try and uninstall and then reinstall the drivers for the graphics card?

-Braydon

Read other 3 answers
RELEVANCY SCORE 58.4

I continue to receive this message after upgrading to Win 10.  I'm not sure what the SW does, but my monitors "black" color is not as vivid as with Win 8.1 -- other colors are not quite as bright either.  How do I get HP My Display back?  HP My Display has stopped working

Read other answers
RELEVANCY SCORE 58.4

HP My Displa   my display has stopped working.

Read other answers
RELEVANCY SCORE 58.4

hey peeps, im new here so please b gentle

right, basically, i had 2 screens set up, main is a 17" lcd monitor and 2nd is a 40" samsung hdtv connected thru s video.
i use 2nd display when i watch films on my pc as its better thru tv, but when i wasnt watching films i would set it back to just single display as it annoyed me when the pointer would get lost off screen on the 2nd display.
it worked fine for ages then 1 day i tryed enabling 2nd display and it just wouldnt work, doesnt even reconise it, ive tryed disconecting and reconecting wires etc, i can only think maybe an update or something triggered it??

any advice would b greatly apprieciated

thanks
jingle
 

A:2nd display stopped working

I'm going to ask a few questions to help get acquainted with the issue and your hardware;

1: What OS are you running?
2: Do you know what make/model video card you have?
3: Does your video card have a DVI (White, rectangular connector) output?
4: How many outputs does your video card have in total?
 

Read other 3 answers
RELEVANCY SCORE 58.4

I get the message - "HP My Display has stopped working. A problem caused the program to stop working correctly. Windows will close the program & notify you if a solution is available." What do I need to do to correct this - if anything.
Thanks.
 

Read other answers
RELEVANCY SCORE 58.4

hi there ,

i have recently installed vista ultimate x64 and since the fresh install i have been recieving an error message saying that display.exe has stopped working, this doesnt affect anything appart from there being a flashing error at the bottom of my screen, at least i think thats all it is. I have a Nvidia Geforce 7600 GS on an asus k8v-x mobo and AMD 64 3000+. Does anyone know what the problem could be and how to sort it, thanx in advance

Read other answers
RELEVANCY SCORE 58

Dear sir plsss help me out when i start a app or game error shows DISPLAY DRIVER HAS STOPPED WORKINGi updated the display and graphics driver done full reset the windows but still same issue

Read other answers
RELEVANCY SCORE 58

I have a GTX 970 Zotac Extreme Core Edition and the updated drivers. When I first installed the updated driver it doesn't crash as much when time flew by it crashed when I am watching something or playing. The only solution to this problem is by rolling it back and using the driver in the CD that my video card provided. I want to use the updated drivers.

A:Display driver has stopped working.

Hi if the driver that came on cd is not causing issues just use that and wait for another driver update. Are you having any problems with the driver that came with the card if not don't fix something that's not broke.

Read other 6 answers
RELEVANCY SCORE 58

hi,i downloaded flightgear.org but it wouldnt play, said i needed a more poweful graphics card and also not supported by open gl driver. i had a radion hd3450 3d card installed with appropriate upgrade to memory.it still wouldnt play game so i deleted flight gear completely and installed a microsoft flight simulator.
now i get...ati 2 dvag display driver has stopped working normally. and when i try to play a normal game i hear the music but black screen and no curser movement.when i turn the comp off i get a message stating.
vpu recover has reset your graphics accelerator card as it was no longer responding to graphics driver commands.
but it hasnt,so ive spent my money and my comp can read emails etc but no games etc at all.
ive looked at other peoples tales of woe and hope mine is solvable.!!!
thanks...(hopefully) in advance
 

A:display driver has stopped working normally

First thing to try is System Restore to a date before ypu installed Flightgear
 

Read other 3 answers
RELEVANCY SCORE 58

Ive been using an external monitor along side my winxp HP laptop for months via a VGA cord. I decided to connect my tv to my laptop using the same VGA cable and it didnt work. so i plugged it back into my laptop and that no longer worked as well!
took 30 seconds for my monitor to become useless.
Ive bought two other VGA cables thinking maybe my tv fried the cable, but still nothing works.

i don't think its drivers because it worked fine one minute and didn't the next. No signal is going to the monitor at all. no sign of the monitor even being connected.
anything i can do? Thanksssss.
 

A:2nd display monitor stopped working?

It sounds that more than likely the VGA port going out from the laptop was switched off during one of the changes. Most laptops now have a shortcut to turn this port on (since I believe it is off by default to save power) For example, mine is Fn+F5. What kind of laptop you have will determine this shortcut key. What is the model of the HP laptop are you using?

There might also be something wrong with the monitor though that is very unlikely. Does the monitor power on still and simply go into standby due to no signal? If the monitor has multiple inputs, it could be trying to find a signal from one of the other inputs. There should be a menu option to make sure the monitor is on VGA.

This is likely what was wrong with the TV as well, either it was looking at the wrong input or your laptop wasn't giving the proper output.

Hope this helps.
 

Read other 1 answers
RELEVANCY SCORE 58

Recently my HP MY DISPLAY software has stopped working.  This is the softare that allows me to use the advanced features of 34" curved display.  I have downloaded all of the drivers/software on the support page but it hasn't helped.  I have uninstalled them and reinstalled and it has not helped.  When I try to open HP MY DISPLAY a messge pops up that says "Enumerating Display Devices phase 1" , then a large moving circle displays like it is waiting.  Then I get the error messge "HP My Display has stopped working". Any ideas?

Read other answers
RELEVANCY SCORE 58

Re: Windows 7 O/S. Lately, while playing a game on Gamesville. I get a freeze and then a white screen on the whole face of my monitor and then the graphic returns and I see a balloon pop-up that says. Display Driver stopped responding and then it recovered. Is this something that is "going" on my computer or is there something I can/should do? Thank You.

A:Display Driver Stopped Working

It's not dangerous, relax. Install fresh drivers for your graphic card. What type of graphic card do you have?

Read other 4 answers
RELEVANCY SCORE 58

So, the display was working till the afternoon when I decided to clean the computer. So i plugged all the cords out of the computer and put it on the carpet. I opened it and then I used a Duster 2 for the computer says (Removes dust from electronic equipment) which is the computer. Well, when I plugged back in everything the display would no longer show up. It would say No input connection for hdmi input.I am using a Ibutpower computer and I think it has to do with the dvi import for the computer. Now I might have sprayed too much of the Dust 2 inside should I wait a few hours before rebooting?Also, when I hit menu on the monitor it just says (monitor going back to sleep) so it won't let me factory reset.Any ideas on how I can get the display to work?

Read other answers
RELEVANCY SCORE 58

Occasionally I'll be watching a youtube video (this only happens in fullscreen), and it will freeze up and I can still hear the audio. After 2-3 seconds it will resume and in the bottom right it displays something along the lines of "AMD display card stopped working and has recovered". A few times I've even got the VIDEO_SCHEDUALER_INTERNAL_ERROR on the BSOD.

I checked and the drivers are up to date. Any suggestions?

A:AMD Display Driver Has Stopped Working

Hi there,

have you had these issues all the time? Or did they just start happening after a driver update from AMD? It's not always wise to update the videocard drivers. Sometimes newer versions introduce new issues.

I for instance also have an AMD videocard. All drivers newer then 13.1 result in a crash in 40% of the time I close Internet Explorer.

So, what I'm trying to say is. Try to downgrade your AMD drivers to the latest version where you didn't have this issue.

Good luck with it!

Rover

Read other 17 answers
RELEVANCY SCORE 58

HELP!

I have some problems with some games. It's one of those black screen -> ''Display driver atikmdag stopped responding and has successfully recovered'' (-> Game crash) Errors

Some games work fine, but some start messing too often so it has become unplayable. What can i do to fix this problem or at least find out what's wrong?
I heard it's a Vista problem. is it?

PC Specs:

Intel Core 2 Duo E4500 @ 2.20GHz
3GB RAM (1x 2GB, 1x 1GB)
Club3d HD4850 512mb Overclocked Edition (Latest drivers)
580W PSU
Asus P5LD2-X/1333 Motherboard

Windows Vista Home Basic 32-bit

Let me know if you need more information.

List of games, in which i have gotten this error:
Dark Sector (Very often, Crashes the game, Sometimes even BSOD!)
Riddick: Assault On Dark Athena (Very often, Crashes the game)
Call Of Duty 4 (rarely and successfully recovers and i can continue playing)
Terminator: Salvation (Often, Crashes the game)
Warhammer Online: Age Of Reckoning (Very Often, Crashes the game)
And there's probably many more games....
 

A:Display Driver Has Stopped Working

Read other 9 answers
RELEVANCY SCORE 58

Firstly, my Nvidia GTX560 got this problem since my friend made my PC. It used to get the error (NVIDIA windows kernel modedriver <driver version> has stopped working but recovered). I tried updating drivers and it didn't work. I then changed to windows 8 and still got the error but also getting the error 'dxgi error device removed/hung' (see my other posts). I then swapped my graphics card with my friend if it solved the problem. He had an amd radeon and I still got the error 'amd display driver has stopped working but successfully recovered' but this time when crashing, sometimes my display goes off as if it is disconnected (but it is connected). When crashing it has a buzzing noise and sometimes has a distorted blue screen. Could anyone please help as I have been getting so many errors on my PC constantly? Thanks a lot! [MINIDUMPS and info attached]

Read other answers
RELEVANCY SCORE 58

Whenever i use windows movie maker, photo gallery etc my screen would flash black and then a message would come up saying " AMD display driver has stopped working and has successfully recovered occasionally it would go to the blue screen.
I have a AMD Radeon HD 6320 graphics display driver.
Ive tried uninstalling recent updates and updating the driver but apparently ive already got the most up to date driver.
im using windows 7

give me some solutions please ??

need help

A:Display driver has stopped working

please check the temperature with hwmonitor and upload a picture.

Read other 5 answers
RELEVANCY SCORE 58

So, the display was working till the afternoon when I decided to clean the computer. So i plugged all the cords out of the computer and put it on the carpet. I opened it and then I used a Duster 2 for the computer says (Removes dust from electronic equipment) which is the computer. Well, when I plugged back in everything the display would no longer show up. It would say No input connection for hdmi input.I am using a Ibutpower computer and I think it has to do with the dvi import for the computer. Now I might have sprayed too much of the Dust 2 inside should I wait a few hours before rebooting?Also, when I hit menu on the monitor it just says (monitor going back to sleep) so it won't let me factory reset.Any ideas on how I can get the display to work?

Read other answers
RELEVANCY SCORE 58

Hi please help me as well as I am having the exact same problem. I am unable to connect an external laptop to use my screen via the HDMI cable.

A:Re: HP Envy 34c - HP My Display has stopped working

Hi there @boowah, May the Forums be with you!  I understand that you are trying to use your 34c display with your laptop computer.  I am happy to give you a hand with this. What is the model# of the laptop you are trying to use? Are you getting any error messages on the display when you try to output to the 34c? Also please see HP ENVY 34c Media Display - Product Specifications. What is the maximum resolution supported by your notebooks display adapter? Please let me know when you can.

Read other 1 answers
RELEVANCY SCORE 58

New problem with my Gateway M-6750 Laptop/Vista Home Premium 32bit. "Display Driver has stopped working & since has recovered." It started about a wk or so ago, & it only happens when I plug in my cpu & unplug my cpu from any power source, like a wall or car....etc. Any suggestions & any questions, feel free to ask. Thanx

A:Display Driver has stopped working.....?

Well in my desk top system (might be different) mine would do that when got to hot. Turned fan speed up I havent seen it again.
Also heard of this if OCed to high.

Read other 3 answers
RELEVANCY SCORE 58

I have a GTX 970 Zotac Extreme Core Edition and the updated drivers. When I first installed the updated driver it doesn't crash as much when time flew by it crashed when I am watching something or playing. The only solution to this problem is by rolling it back and using the driver in the CD that my video card provided. I want to use the updated drivers.

Read other answers
RELEVANCY SCORE 58

I've got win vista home premium 32
Last night Suddenly BOSD or blue screen of death occurs to my laptop which caused my display drivers stopped working
I've formatted C: drive, Updated my BIOS, Installed new drivers , but nothing works start up took around 15-20 minutes

Please Suggest any solution for that
 

A:Display Driver Stopped Working

Hi Notin

Could you confirm what the machine does when you boot it up please? Does it get as far as allowing you to log on?

Thanks
 

Read other 2 answers
RELEVANCY SCORE 58

Hello, I bought a new computer some months ago and at first I could play games fine, but when I started trying some other games those wouldn't work. Later, when I played more of some games, after a while they stopped working, saying "the display driver has stopped working", and now I found myself unable to play any game for any reasonable length of time.
Some, like for example Atilla Total War, I cannot even start to play them, I cannot get to the 3d.
I have Windows 10 64bits, a Nvidia Geforce GT730 and 8gb of RAM, and a microprocessor of 3.30 ghz. I have even trouble playing football games of 2009, after a while the pitch disappears and I cannot play any longer.
Any help would be inmensely appreciated.

I have tried increasing the response time, making sure I am using the dedicated graphics card and uninstalling the drivers and reinstalling them (WHQL) with no change.

This is what the Windows event viewer says of the error;

Faulting application name: Attila.exe, version: 1.5.0.0, time stamp: 0x56675acc Faulting module name: Attila.dll, version: 1.5.0.0, time stamp: 0x56675ff9 Exception code: 0xc0000005 Fault offset: 0x01a88a22 Faulting process ID: 0x19a0 Faulting application start time: 0x01d20923f0b1cafc Faulting application path: C:\Program Files (x86)\Total War Attila\Attila.exe Faulting module path: C:\Program Files (x86)\Total War Attila\Attila.dll Report ID: 10aea5b5-8720-421f-af17-de31adfd74f2 Faulting package full name: Faulting package-relative a... Read more

A:Display driver has stopped working - what can I do?

Read other 7 answers
RELEVANCY SCORE 58

display driver has stopped working Will try to get exact error message next time happens fairly regular on a new Geforce 9500gs.
This is driving me crazy just installed 64-bit home premium because the 32-bit oem made explorer crash my rig is pretty new hard ware wise the components don't have over a year of use yet.however could it be something with the bad install of 32-bit I wiped the whole drive?

A:anyone have a fix for display driver has stopped working

I would uninstall the driver (e.g. in Device manager) and reboot. Hopefully the system will find the last driver by itself.

Read other 8 answers
RELEVANCY SCORE 58

Hello, has anyone ever seen this error:
The ati2dvag display has stopped working normally. Save your work & reboot the system to restore full display functionality. The next time you reboot the machine a dialog will be displayed giving you a chance to upload data about this failure to microsoft.
 

A:Please help!!! ati2dvag display has stopped working normally.

What was in that dialogue when u rebooted?
 

Read other 2 answers
RELEVANCY SCORE 57.2

I started having it too on my ATI HD4850 over the weekend.
new system build i7 920 6gb DDR3 1333 1 TB sata2 drive and a HD4850
works ok as long as not running fallout3 or dawn of war 2
Battlefield 2142 ok but, not as graphicly demanding thou.
On Vista X64 sp1 EX58-UD3R mainboard
was ok saturday ran 8 hours on fallout 3, then sunday
wouldn't even last 10 minutes. Just installed dawn of war 2 major
crashing in startup movie. I got 7 fans so cooling should be good.

all the latest driver updates
just ran GPUZ highest temp was 60 C on any the readings
625mhz 990mhz 100% 2500rpm

A:ATI HD4850 display driver stopped working

My video card blew up during a disk format.
Got new HD4850 everything OK now I can run anything.

Still good temps and no driver warnings or BSoD

Read other 1 answers
RELEVANCY SCORE 57.2

I have received this message twice in the last month or so. I tried both times to download "Microsoft Fix It" but after the shut down and re-start I do not see anything new that could help me fix this issue. I have a laptop from HP and Windows 7. In addition I have been experiencing a lot of freezing lately, even several times a day. I am quite light with technical issues, therefore any help will have to be as simple to explain as possible. Thank you for any assistance, Ana

Read other answers
RELEVANCY SCORE 57.2

I am facing this problem once in each 3-4 hrs.
Everything is getting frozen and display is going black
for 2-3 seconds.Then I am getting a message like:

Display driver stopped working for Windows Vista(R)
and recovered.

The point is that I am running Windows7 Professional
(32-bit).

A few minutes ago I got a blue screen.
Everything is running fine for now but that can happen again.
Please help me solve this problem.

These are some information which might be useful:

Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Manufacturer: Intel Corporation
Chip type: Intel(R) 4 Series Express Chipset Family
Display Memory: 782 MB

I am getting this error after formatting my PC a few days ago.
Thanks in advance.

A:Display driver stopped working and recovered

dont be frustrated, it may happen with your software malfundtions.
it may happen sometime, but would not repeat in a sequence.
if there was a repeat tell to analyse the situation

Read other 9 answers
RELEVANCY SCORE 57.2

OS: Windows 7 Ultimate x64
CPU: AMD Athlon 7750 x2
RAM: 4GB
GPU: Nvidia GeForce 9500gt
HDD: Seagate 1TB

Hi. For the last three weeks I am almost regularly getting Display Driver nvlddmkm had stopped working and recovered successfully error. I have uninstalled and re-installed the latest drivers. I have even used driver sweeper before installation of new drivers. All to no avail. The error happens randomly. It hadn't occurred for the last five days but popped up again today. What can I do to solve the problem?
Thanks in advance.

A:Display Driver has stopped working error

I was frequently having the same error, but was resolved when I installed the latest NVidia 306.97 driver. If you are not using that one, perhaps that will solve your issue too. (though your gpu is much newer than mine).

Read other 4 answers
RELEVANCY SCORE 57.2

I just purchased (not even a week old yet) an HP ENVY x360 Convertible funning Windows 10 Home 64-bit and I keep getting the following error message. Display driver has stopped working and has recovered. I've done all the suggested updates from HP (including the BIOS update) but it still hasn't resolved the issue. I have read the forum and this seems to have been a problem in the past with different PC/notebooks and different operating systems. This is the first WIndows based computer I've owned since 2007, what have I done?   

A:Display driver has stopped working and has recovered

Hi @dsharvey?,Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY x360 Convertible and issues with the Display crashing giving an error message. Try in the Device Manager, click the arrow next to Display Adaptors to expand that categoryRight-click on Graphics and select Update Driver Software if more than 1 Graphics adapter do 1 at a time.Choose the option to Search Automatically for Updated Driver Software.The Notebook should find and automatically install the updated driverAfter the installation is complete, restart your Notebook.You could  try using the Windows Update Troubleshooting tool to fix any updates that have not come through for Windows 10.  Please restart the Notebook twice to make sure all update have been completed!Please let me know how this goes.You can say thanks by clicking the Thumbs Up below!.Thanks.

Read other 3 answers
RELEVANCY SCORE 57.2

I keep getting AMD - Display Adapter Stopped working error. I've done several virus scans and cleaned up whatever it found, did a registry clean... uninstalled/reinstalled video card. But still have issues.

The screen will flicker, windows box comes up saying repairing.. then get the blue screen and computer reboots.

If I disable to Video Card I don't have any issues.

AMD Radeon HD 7570

Any suggestions or do I need a new video card?

Thanks

A:AMD - Display Adapter Stopped working error.

Is this amd card a on board graphics card or a separate card? If its separate i would say it could very well be the card itself. Esepcially if you uninstalled and reinstalled the graphics card to no avail.

Read other 3 answers
RELEVANCY SCORE 57.2

Hy guys how are you?

My Pc is a I7 2600 with an Asus P8h67 MB, 16GB 1333mzh of RAM and a ATI HD 6790
XFX GPU.

I play Battlefiled 3, Deus Ex, F1 2011 in high for hours and hours without a any problem, this runs fine.

But when i see an movie in windowns media player or other video player i the screen freezes and i receive the messege "The AMD display driver stop to work and has recover successful."

It happens only in windows media player ou any other player. In videos att youtube and others (redtube, xvideos ) the computer runs fine, without a error.

Anyone can help me with this?

Thanks guys, you rock \,,/

A:AMD - Display driver stopped working and has recovered

This might help out some.

How to troubleshoot

Read other 1 answers
RELEVANCY SCORE 57.2

At random times my screen will go black then it will come back on soon after and I will get a little bubble coming from the taskbar saying "Display driver igfx has stopped working but has recovered" or something like that.

I google'd it but most of the results seem to relate to World of Warcraft. I do not play or have World of Warcraft installed.

perfmon report attached.

A:Display driver igfx stopped working

"igfx" is your Intel video driver. Update the Intel chipset drivers.

However, PERFMON reports that you are experiencing excessive paging, because only 78 MB RAM is available. You have 1 GB installed physical RAM; Vista really needs 2 GB minimum. I would suspect that the video is going out because there is not enough RAM for your video to function. Paging can only do so much.

Happy Holidays!

jcgriff2

.

Read other 4 answers
RELEVANCY SCORE 57.2

My screen went black of a few seconds and I got a message stating my Display Driver had stopped working. This is the first time this has ever happened

A:display driver stopped working then recovred

This is related to your Graphics Driver.

Head over to the Intel website and see if you have the latest version: https://downloadcenter.intel.com/default.aspx

Read other 1 answers
RELEVANCY SCORE 57.2

...But not all the time. While I was playing Garrys Mod, my computer was working fine, the occaisional black screen and then recovering which it has been doing a lot recently. But last night it went really bad. It started showing strange colours in the screen and sometimes it was all over the screen and i had to wait for it to go. And then it suddenly went all blurry. So I quit the game and went onto my desktop. And it still was blurry (It's not my eyes) But it wasn't the usual blur. The computer had taken a small square and swapped it with the one next to it. and in the corner the usual "Display driver has stopped working and recovered.". I recently had to re-instal Windows (Vista) because of a startup failure. so when I had re-insalled it I re-installed all of the drivers. But I've obviously left something out. Because It keeps on doing this

My PC Specs are:

Windows Vista Home Premium 32-bit
ATI Radeon HD 4670 GFX Card
Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz
^^ There are more to it, if you need it just tell me
 

A:Display Driver has Stopped Working and Recovered

Go to AMD/ATI's support website and download and install the latest video driver for your video card. Make sure that you have all the current Vista updates from Microsoft, including Service Pack 1
 

Read other 1 answers
RELEVANCY SCORE 57.2

ATI display driver has stopped working properly

Got a little flag icon thingy that says this. I see no problems from my end IE everything woiks.

What to do in this case?

A:ATI display driver has stopped working properly.

what happens if you restart the pc?

Read other 3 answers
RELEVANCY SCORE 57.2

Hello guys. I'm having the error on the title randomly when running any game... It was somewhat constant on Titan Quest, happened once on MOH: Airborne and never happened on bioshock or ET:QW

Today I was playing Counter Strike: Source with Bots. all running normally. I would start a server with 30 bots, but by the time the bots would appear on the map, I had the error again. The screen goes black, returns to the game with rendering failures, goes black again and I need to close the game.
The interesting thing is that if I overclock my graphics card a little, It happens more constantly! Power issues?

My rig:

Intel Core 2 Duo e6420 @3.3ghz @1.425v
4 gigs of G.Skill DDR2-800 (GBPK) Ram
Gigabyte GA-965P-DS3 Mobo w/ latest bios
eVGA GeForce 8800 Ultra KO w/ latest WHQL driver for vista (163.69)
Zippy 500w HP2-6500PE ATX Power Supply w/ 36A on the 12v Rail (35A recommended for the ultra on full load)
1x 250gb HDD Drive

any ideas?

A:The display driver has stopped working and has recovered

Try the 163.71 beta driver??
Well i have this one and the same thing happens to me, but give it a try

Read other 15 answers