Over 1 million tech questions and answers.

Release 24 pin ATX connector from mobo

Q: Release 24 pin ATX connector from mobo

Hello everyone! Happy New Year!!

I am trying to replace the standard 300 watt power supply in my HP m7350n computer. It looks like I can handle it, except I am worried about the 24 pin connector that attaches to the motherboard (P5LP-LE). I don't want to break anything, and it doesn't want to release when I press on it and try pulling. I am tempted to use a tiny screwdriver, but that feels like a bad move.

Any hints?

The new 430 watt supply has a 20 plus 4 connector. This just attaches like the 24 pin connector but in two parts (right?)

Thanks, Gordon

RELEVANCY SCORE 200
Preferred Solution: Release 24 pin ATX connector from mobo

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Release 24 pin ATX connector from mobo

Yes just break away the 4 extra pins, using anything you have

Read other 2 answers
RELEVANCY SCORE 59.2

Hello all,

I've looked around the forums and haven't found a decent answer to this...

Does anyone know a specific date for the release of the x64 version of the connector software for Windows Home Server?

I believe MS said in the first quarter of 2008, but I was hoping that someone had a more specific date than that... perhaps someone from MSDN or the WHS team can answer this question in greater depth???

Thanks

A:Windows Home Server connector software (x64) release date?

Hi

The x64 Connector will be bundled in with Windows Home Server Power Pack 1 which Microsoft have slated (somewhat vaguely) as shipping in the first half of 2008.

My hunch is that we won't see this in Q1. As soon as a date is released we'll announce it over at We Got Served (We Got Served - The Windows Home Server Site)

Cheers
Terry Walsh
MVP - Windows Home Server

Read other 2 answers
RELEVANCY SCORE 56.4

How does one tell if their mobo has a 20 or 24 pin power connector (short of opening up the case and looking)?

EMachines T3508 Desktop

Intel Celeron D Processor 356 3.33GHz
533 MHz FSB | 512 KB L2 Cache
300 watt PSU
 

A:Mobo And PSU: Connector

You really just need to pop the side of the case off and look, unless you know the brand name and model number of your motherboard and can look it up on the manufacturer's website.
 

Read other 2 answers
RELEVANCY SCORE 56.4

My wife's computer - spec build: MoBo MSI A55M-P33 /N1996 / MS 7786 v.1.0. I found a MoBo description (on internet) which says it has a FDD connection. I think I've looked everywhere but haven't found it. Is it there or not?
Thanks.
 

Read other answers
RELEVANCY SCORE 55.6

Hi, I am tying to sort a PC for a friend. The PSU appears to be fried, so swapped that for a spare one. The spare provides power to the mobo in that the on board LED lights up, AGP powered fan spins up, as does the CPU fan and the case fan. However this is as far as I get, the is no video output. I am wondering if the mobo is fried too. One other thought is that the 20 pin connector on the original PSU contains 20 cables, whereas on newer PSUs there are only 19. Could it be that as the PC was built with a PSU which provided 20 cables into the 20 pin connector that a 20 pin connector fron a newer PSU which only contains 19 cables might not work? Sorry if this is a bit garbled.
 

A:Mobo power connector

partofthechaos said:





Hi, I am tying to sort a PC for a friend. The PSU appears to be fried, so swapped that for a spare one. The spare provides power to the mobo in that the on board LED lights up, AGP powered fan spins up, as does the CPU fan and the case fan. However this is as far as I get, the is no video output. I am wondering if the mobo is fried too. One other thought is that the 20 pin connector on the original PSU contains 20 cables, whereas on newer PSUs there are only 19. Could it be that as the PC was built with a PSU which provided 20 cables into the 20 pin connector that a 20 pin connector fron a newer PSU which only contains 19 cables might not work? Sorry if this is a bit garbled.Click to expand...

what mobo is it? does it have an additional 4 pin power connector? or an additional 8 pin power connector?

The more specs you can provide the better.
 

Read other 2 answers
RELEVANCY SCORE 55.6

Hi guys. I just received a PC a bought online. The motherboard is a "ASUS 1155 P8H61-M". The thing is that I ordered an extra fan apart with the one that comes with the case, and the thing is that this extra fan they gave me has a 3-pin female connector (see first image).
My motherboard only has 1 male 3-pin connector, and its reserved for the cpu fan. It also
has 1 male 4-pin connector but its occupied but the fan that comes with the case...
There is a weird series of 7 pin connectors in which my fan connector would fit, but I'm not sure if those are meant for fans 'cause to those 7-pin connectors my HDMI audio and USB connectors are connected....

My psu has no 3-pin male connectors, just more female 3-pin ones or some weird 4-big pin ones (see second pic).... what should I do?? Is there some kind of attachment I need to buy?

A:can't connect 3-pin fan connector to mobo

sorry not 7-pin connectors.. they have 9 pins

Read other 3 answers
RELEVANCY SCORE 55.6

Hi!

I have a MSI Z170A Mobo. It comes with an on board RGB connector. I currently have two RGB Fans connected and working properly.

My question is how many more can it handle. I want to expand to 6 fans all RGB connected in series
 

Read other answers
RELEVANCY SCORE 55.6

I've got a Premio mobo. a 212J, that has an unusual board socket for the power supply.
It's a white plastic socket with the internal pins.(2 banks)
A scan of this board can be seen at:
http://home.earthlink.net/~gothix/premio.html

This is probably a real newbie question but I've never seen a power socket like it.
Thanx in advance.
 

A:mobo power connector???

Read other 6 answers
RELEVANCY SCORE 55.6

System Specs:
p4 3.0 prescott core
gigabyte socket 478 mobo
radeon 9800 pro (Sapphire)
dual 1gb rosewill mem. (2x512)
Compusa 500 watt power supply

Well let me start from the beginning. A few weeks ago my computer started to shut off while I was playing counterstrike 1.6. I checked my temps and they were well below the threshhold. Maybe about 65 C. So I figured it might have something to do with the graphics card being that i wasnt getting any problems outside of the game. I uninstalled the driver software and it gave me a couple errors. "Zero Display Service" error. I spoke with a friend and they told me to use nasty file remover, while booted in safe mode, to remove all the files. By this time I had cancelled windows "adding new hardware" thing, and clicked on the updated drivers I had downloaded from ATI. During setup i recieved two errors. One was an "INF Error : display driver not found" then "Setup could not complete, try installing thye standard VGA driver before beginning setup." Well the only other thing I could do was install using the disc that came with my card. This too gave me an the "Zero display Error" but it still completed the installation. This did not fix my computer shutting off problem. After cleaning out my computer and checking all the connections, and disconnecting and reconnecting I finally got the driver installation to not give me an error. I'm not sure how I did it, I used the cd, but for so... Read more

A:Melted 4 pin connector (mobo-ps)

Read other 9 answers
RELEVANCY SCORE 55.6

Im working wth a computer that lost its power supply. Specs are not needed, my question is very general. Helping troubleshoot via telephone.

Bestbuy brand power supply died. Owner replaced it with a Thermaltake PSU. The system shuts off after heavy usage like gaming and stuff.
Visual inspection shows that the 4 pin ATX connector socket on the mobo next to the CPU has some melted plastic inside it, so the new PSU connector doesnt fit snug.
If the connector is held down with tape, it will stay on longer, but eventually shuts off again.

I was wondering if I could clean the plastic off, or just get a 8" 4 pin extension cable, plug the female end into the new PSU, cut off the male end and solder it to the mobo.
I know that I will have to be careful and make sure nothing will short out. Just wondering if that would be a solid fix or not? Thats the only visible damage. Thanks in advance!
 

A:Burnt 4 pin 12v ATX connector on mobo

Only if you are experienced, and very good at soldering.
There should be a way of using that extension cable by slightly compressing the socket... and I do mean slightly, just to make the fit more firm.
If you have access to a womans power sander or file that many women use to repair and polish their nails, you might be able to clean up the posts in a way that would be helpful.
As you are aware, be very careful to avoid putting pressure on those posts because the motherboard is very fragile and any pressure offers the risk of damaging the contact between those posts and the board, and that will be extremely difficult to fix...

Be sure to use very good lighting and perhaps a magnifying glass to be sure it is not already damaged.
 

Read other 5 answers
RELEVANCY SCORE 55.6

Title says it all pretty much, I'm getting my computer in about 30 or so days and my case has 3 fans on it and my motherboard only has one case fan connector, what can I do besides buying a more expensive motherboard?

Case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811119197

Mobo: http://www.newegg.com/Product/Product.aspx?Item=N82E16813131647

Any help or advice is appreciated, this is my first build so I'm just trying to figure these things out lol.
 

A:3 fans 1 connector on mobo, what do i do?

The fans on that case look to have the 5 pin molex connectors . . you can use them instaead of the 3 pin motherboard connector
 

Read other 1 answers
RELEVANCY SCORE 55.6

hey all im really desperate with this. so i hope this doesnt be in wrong subforum.

well i recently cant get my computer booting. apparently because of the 4-pin mobo connector. im not sure whether its the mobo part loosen, or the power supply itself.

so after playing with the cables and such, my computer working. but its been twice from just now it freezes, (because of loosen 4-pin mobo).

so im confused, and worried, what to do in order to make the computer stable again? must i check the cable jack or....

regards
 

A:Mobo 4-pin connector going nuts

The 4-pin CPU power connector is supposed to snap in and lock... Did the locking lever break off, or is the whole connector loose?
 

Read other 2 answers
RELEVANCY SCORE 55.6

I bought a Startech hot swap tray for my 5.25 bay and it installed with no problem,but I have a 2pin connector for the LED and I do not know where to plug it in at. Also do I need to plug it in? I have a EVGA 680iLT mobo if that helps. I do not see anything in the mannua.l

A:Plug 2 pin connector on MoBo

Can you provide a picture of the 2pin plug. It would help greatly.

Read other 9 answers
RELEVANCY SCORE 55.2

I've wanted to know the difference in useing ATX power connector and ATX 12V connector. my mobo and psu both support ATX and ATX 12V. standard atx i kow has been around for awhile. so what the difference?
 

A:Solved: Mobo Power connector

1.2. Key Changes for ATX12V Version 2.0 and later as Compared with ATX and Pervious Versions of ATX12V Power Supply

This section briefly summarizes the major changes made to this document that now defines ATX12V power supply. With the move to 12V voltage regulators for the processor, ATX guidelines for 5V as main power are no longer provided.

1.2.1. Increased +12 VDC output capability
System components that use 12V are continuing to increase in power. In cases where expected current requirements is greater than 18A a second 12 V rail should be made available. ATX12V power supplies should be designed to accommodate these increased +12 VDC currents.

1.2.2. Minimum Efficiency
Minimum measured efficiency is required to be 70% at full and typical (~50%) load and 60% at light (~20%) load. New recommended guidance has been added to provide direction for future requirements.

† 2.03 is the current version of the ATX Specification as of this writing. Future references to the ATX Specification in this document imply version 2.03 or later, as applicable. ATX12V Power Supply Design Guide 8

1.2.3. Main Power Connector:
The 2 x 10 main power connector has been replaced by a 2 x 12 connector. This was made to support 75 watt PCI Express*requirements. Pinout assignments are based on the SSI recommendation.

With the added 12V, 5V, and 3.3V pins the need for an Aux Power connector is no longer needed and the guidance for this connector has been removed.

1.2.4. Separate current limit for... Read more

Read other 3 answers
RELEVANCY SCORE 55.2

I have a connector on my mobo for USB 2.0, It lists 2 pairs of pins like
5V, 7-, 7+, GND and 5V, 8-, 8+, GND

Then it shows a single pin at the end of the connector labeled NC.

One my USB from panel connector I have 2 sockets matching the 2 pair of pins on the mobo USB connector. Then there is a single wire in the same bundle from the fron panel USB socket with the 2 connectors that is labeled GND. Does the single wire from teh front panel socket that is labeled GNDgo on the mobo pin labled NC?

Thanks,
Charles
 

A:Pinout label on USB mobo connector

I believe that the label NC stands for No Connection.
 

Read other 3 answers
RELEVANCY SCORE 55.2

I have a hiper modular psu, and the asus A8N-Sli premium mobo, in the antec p180 case, for anyone who has a similar set up (or has just used that case in fact) has probably noticed getting the 12v 4 pin atx connector from the psu (in bottom left hand corner) to the ATX slot (in my case the top left hand corner), is kindof hard unless you have a rather long cable (espesically as with the case layout you have to slide it through pretty much the middle of the case). Anyway this wasnt really a problem for me until I bought a new sound card and the fact that the cable is tought across all my spare pci slots is suddenly rather annoying, basically I either need to extend the original cable, convert a molex into the 4pin 12v ATx cable, or buy a whole new cable thats a bit longer (as the PSU's modular). Feedback on how to do either of these (or which is best) would be greatly appreciated (even just a website to buy the parts from would be great as I can't find one anywere) as having a soundcard sitting on my desk is rather annoying, to think i could be fragging in surround sound
 

A:4 Pin 12V atx connector to mobo isnt long enough

I'd go with an extenstion since all you need is a little more slack.

Found one at this UK site Maplin.co.uk
I don't know where you're posting from, but there's likely to be a retailer that has a similar item near you.

EDIT: Doh, just noticed they're out of stock.
Lots of extentions here: performance-pcs.com
 

Read other 3 answers
RELEVANCY SCORE 55.2

Okay I've searched up and down the web and can't find anything about this connector.

First off this is a 300-watt Compaq PSU from a Presario 7000 Desktop.

This Compaq computer won't power up. When I installed a standard ATX-12 PSU, the green light on the mobo came on but because most ATX-12 PSU's don't come with this very proprietary connector the computer failed to boot up. The CPU fan didn't even twitch. But the mobo green light AND the PWR LED on the front of the case lit up. Neither lights came on with the original Compaq PSU.

This connector is white and labeled "P8" and is a 6-conductor white plug. The overall size is similar to the power connectors you plug into your hard drive and other IDE devices. It looks like an oversized floppy drive connector. The wiring colors are: Red, Orange, Orange, Black, Black, Black.

I've traced the wires and here's where they go to the PSU's circuit board:

Red - connects to the same red lead on the IDE power connectors
Orange - connects to the same orange leads on the main power (mobo) connector
Black - connects to what looks like the PSU's chassis ground.

It looks pretty straight forward and I could probably modify a standard ATX-12 PSU to a Compaq PSU by snipping off this 6-conductor plug and splicing into a generic PSU's standard wiring.

But before I attempt this, is there anyone out there that knows the pin configuration on a standard/g... Read more

A:Compaq PSU 6-pin connector plugs onto Mobo near IDE

This link may be of some use to you possibly.
http://www.technick.net/public/code/pinouts.php

If not, i have opened up and rewired many psu's.

Rik.
 

Read other 4 answers
RELEVANCY SCORE 55.2

Hi, i have a http://www.fic.com.tw/product/motherboard/INTEL/VG33.aspx and i dont know where the case connector plugs go (power on, h.d.d led, speakers) I dont have any manuals or cd's, just the mobo.
 

A:Need to know where case connector plugs go on new mobo.

Go HERE and download the manual.

Regards Howard
 

Read other 1 answers
RELEVANCY SCORE 55.2

My motherboard is a model Ms-6330 Ver: 2.1 (Microstar) but it also has the gateway part number 2512595. I am currently relocating this motherboard to a brand new case that I just bought and I ran into a problem. The front panel connectors (power switch, led, hdd led, etc) go onto the motherboard in a certain area where there are 15 pins. Unfortunately I have no idea which connectors connect to which pins. Can someone help me? (Maybe someone with the same motherboard/problem). All I need is a way to identify the pins and make sure I don't like accidently fry my motherboard. Thanks a lot! -Andrew C.
 

A:Front Panel Connector on Mobo

Hi,
For starters, have you checked your manual? Also, look on the m/b...in really tiny abbreviated letters you should be able to see where these go (you may see "pw switch"...."HDD ACT"........i know when i was installing my connectors, i got most of them wrong..but dont worry..no frying of the motherboard.....if the connector is in the right place but no light from the LED..try reversing the cable........the easiest cables to place are the pw switch and the reset..as you can test these easily....good luck
 

Read other 3 answers
RELEVANCY SCORE 54.4

does anyone know or have a good reliable psu (550w or so) with a native 24pin mobo connector. im gonna get this dfi lan party mobo and its highly recommended to have a 24pin and not a 20 with an adapter so ive been looking around but all i can find are the adapter ones and really expensive ones. im looking to drop at most $150. much thanks as always.

also needs to be pcie compatible and sli and sata and other goodies

planning on putting in a evga 7800gtx KO if newegg ever gets it back in stock.
 

A:good psu with a native 24pin mobo connector

Newegg list of SLI PSU's
 

Read other 5 answers
RELEVANCY SCORE 54.4

Hi, I researched this board and found two other posts documenting this issue:https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P51s-sata-ribbon-attachment-FAIL-NO-FIX/...https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P51s-sata-HDD-cable-FRU-dislodged/m-p/40... Interestingly enough, this seems to be a problem to at least two other people during the month of March 2018. I have this same problem. My p51s just all of a sudden stopped detecting the storage drive. I opened the case to find that the SATA connector wasn't even connected to the motherboard. The connector that should hold the sata cable is just completely detached. And the piece that was within that connector is out of place as well. Please reference this photo (NOT MY PHOTO -- not taken by me, credit:https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Upgrade-ThinkPad-T570-from-SATA-HDD-to-M...):  This person's laptop seems to have a strong solder, which I don't believe mine did. Please advise how I can get this repaired, get a new computer, or just give me my money back. I've used Lenovo for ~10 years and have never had problems like this. I need this computer to work.

A:p51s sata mobo connector is broken

+ picture of connector parts, detached

Read other 2 answers
RELEVANCY SCORE 54.4

Hi everyone. Ive just finished plugging my power led, hdd led and pc speaker into my motherboard. The only thing i have to plug in now is the reset switch but i dont know where it goes. Does anyone know where it plugs into? My motherboard is a DCS 370VB.
 

A:Cant find reset switch connector on mobo.

It shows up nowhere in the manual ? Generally it is quite close to the set of pins to which you plug the HDD led, speaker, etc.

ps. searching for your motherboard on Google doesn't yield much results so I can't seem to find a digital manual for it.
 

Read other 1 answers
RELEVANCY SCORE 54

I'm having a problem with the Karajan audio connector on my new DFI NF4 Ultra D mobo.

I just finished putting together my new PC last night, and I've got Windows loaded and all of that good stuff.

But I'm having some audio problems.

My computer is not even recognizing any sort of audio output device.

The motherboard on-board sound piece is actually a separate piece that you connect to the board.

I have it connected well. I went back and made sure it was on good, and I installed the drivers and such, but I still can't seem to figure out what the problem is.

Karajan makes the audio piece, and I did a bit of Googling and I came across a guy on some other forum who was having the same problem, but he never mentioned how or even if he got it working.

Does anybody have any suggestions?
 

A:I'm having a problem with the Karajan audio connector on my new DFI NF4 Ulta D mobo.

From here - http://www.nvnews.net/vbulletin/showthread.php?t=67098

"I had a similar problem (no sound output) and the way I fixed it was that I had the front case jumpers connected incorrectly and when I connected them correctly, it fixed the problem."

"I pulled them all off and swapped the front output from Line_Output_Front on the Karajan module to Line_Output and now everything works"
 

Read other 3 answers
RELEVANCY SCORE 45.2

These release notes address critical late-breaking issues and information about this beta release of the Windows? 7 operating system. For less serious issues, refer to Things to Know About This Beta Release of Windows 7 (Download details: Release Documents for this Beta Release of Windows 7). Unless otherwise specified, these notes apply to all editions of Windows 7 that support the features mentioned in each note.
Accessibility

Microsoft? Narrator does not read information from the command line properly. This issue may also affect non-Microsoft screen reader applications.

To correct this, always run the command prompt with administrator privileges.

Apple iTunes

This issue only applies to 64-bit editions of Windows 7.

If you attempt to download and install Apple iTunes, the 32-bit version will be installed instead of the 64-bit version. This will prevent syncing with iPhone.

To avoid this, install the 64-bit version from the following location: iTunes 8.0.2 for Windows Vista 64-bit.

Backup
When you attempt to restore files backed up from a Windows 7 computer to a Windows Vista? computer using the Restore wizard on the Windows Vista computer, the restoration fails.

To work around this, in the location where the backup file is stored, locate the Mediaid.bin file, which is in inside a directory that has the same name as the computer. Move the Mediaid.bin file up one level, so that it is at the same level as the directory with the same name as the comp... Read more

A:Release Notes: Important Issues in This Beta Release of Windows 7

Thanks DA,

Excelent post

Everyone should read this info so have made thread sticky

Read other 9 answers
RELEVANCY SCORE 45.2

GFI Software is happy to announce the general availability of Service Release 2 for VIPRE 2012. This Service Release is a free update, applicable to all users of VIPRE Antivirus 2012 and VIPRE Internet Security 2012.

We have improved the performance of VIPRE and resolved several customer-reported issues in this release. Service Release 2 contains a number of improvements to the firewall and web filter drivers, the VIPRE service, and threat engine. Because it is a service release, no new features were introduced.

Highlights of this release:

Fixed issues where the firewall or web filter drivers would hang
Fixed instances where browsing the internet, or using uTorrent, with web filtering turned on would cause a system hang
Resolve issues with Active Protection
Resolve an issue where incompatibilities with other drivers would result in Windows shutting down with STOP error
Fixed a service crash during product registration on certain machines
Now correctly reports incompatible programs on computers running 64-bit versions of Windows


How to Get Service Release 2:

VIPRE 2012 will automatically check for the update and prompt you to install. GFI Software is making available Service Release 2 to all users of VIPRE 2012 on a ?metered? basis. This means some customers will receive the update sooner than others. If you?d like to manually update immediately, you can find instructions here:

http://kb.gfi.com/articles/SkyNet... Read more

A:VIPRE Antivirus 2012 - Services Release 2 - Release Announcement

I am interested to see this:
Resolve issues with Active Protection
Fixed instances where browsing the internet, or using uTorrent, with web filtering turned on would cause a system hang
 

Read other 8 answers
RELEVANCY SCORE 45.2

I am in need of a program to be able to look up MP3s on an online database and return the ORIGINAL YEAR the song was released as well as the ORIGINAL ALBUM. I don't want Greatest Hits or Compilations. So say for instance, I have an MP3 titled "Def Leppard - Photograph". I don't want the program to return the greatest hits albums that this song was on and the year those greatest hits albums were released, I only want to see "1983" and "Pyromania".

Does anyone have any idea where I can find something like this?
 

A:Taggin MP3s with Original Release Year and Release Album

Déjà Vu all over again.

http://forums.techguy.org/all-other-software/871899-music-tagging-software.html
 

Read other 3 answers
RELEVANCY SCORE 44.8

My mouse's right click is not functioning properly. When I press down the right mouse button, nothing happens, but when I release the button it seems to perform right mouse down and right mouse up at the same time. I figured this out through Browser Mouse Event Test Page. I have tried switching to a different mouse, but it still has the same issue. Everything else about my mouse seems to be fine(left click, movement, ect.). This makes me unable to hold down the right mouse button, which is required in most games.
Thanks

Read other answers
RELEVANCY SCORE 44.8

Hello Members, just a quick question please
Will i be able to upgrade from Windows 8 Release Preview, to the Windows 8 final release, and when i mean the term upgrade, i'm talking any programs,files and settings i may have installed while using the Win 8 'Release Preview'.

I have searched this forum, aswell as other forums, i've also look at the Microsoft Windows 8 Release Preview 'frequently asked questions', but can't find clarity to this specific answer, does anyone know the answer please?

I havn't installed Win8 RP to my computer (Dell Inspiron 2320) a yet, so this issues what's holding me back.

Also what runs better, a Windows 7 to Windows 8 upgrade install (same drive partition)?, or, a dual boot with Windows 7 on it's original partition and Windows 8 on it own partition but still on the same hard drive, the reason i asked is that i gather in creating a new partition for Windows 8, the Windows 7 partition need to be compacted down, is there a performance impact to either OS?

Any info, or opinions would be great.

regards
Livio

A:Will i be able to upgrade Windows 8 Release Prev to the final release

Welcome to the EightForums! liviococcia

Once the finished retail product is available when launched you would need to perform a clean install as with any previous version of Windows. The backup tools however may allow you to preserve and restore user files and settings without too much problem.

The final details in the "pudding" so to speak will be known once the RTM(Release To Manufacturers) is seen. Clean installs are always the preferred option over upgrading over a previous version which can often carry some problems along with the upgrade.

With the Windows Easy Transfer option with 7 once all programs were back on a clean install the restoration of the backup made with that option was found to restore the files and settings with 7. I expect the same should be seen with 8 as well.

Read other 1 answers
RELEVANCY SCORE 44

New Pre-Release Build: 21.0.0.100 is Now Available!
You can see more information here!

Final version is expected on 14th of September!
 

A:New pre-release build is available and information about release date

Is Norton End-Point for the Home User? And does it offer better protection?
Also, how is the Ram Usage? Just wondering?
 

Read other 5 answers
RELEVANCY SCORE 42.8

Hi there. Please view this item
http://www.newegg.com/Product/Product.aspx?Item=N82E16833127063

I am confused whether or not the antenna or cable will screw onto my wireless adapter card.

My wireless Adapter card has a SMA connector on it with the screw wedges on the outside rather than inside with a pin in the middle.

Heres a photo of a similar SMA connector - http://content.answers.com/main/content/wp/en-commons/thumb/9/90/200px-Gniazdo_RPSMA.jpg

The brand of the network adapter is the same as the brand of the antenna they are both D Link so youd think they would fit.
will the antenna or cable screw onto that?

thanks, jordan
 

Read other answers
RELEVANCY SCORE 42.8

Hi. I am new to building computers and have a question on fans. My case has three fans. Two of my fans have both pin connectors and molex connector attached together. How do I power the fans ?- do I need both connections?
thanks
 

A:Fans with molex connector and pin connector

The 3pin connectors are to plug directly in to the motherboard......if your motherboard does not have the 3pin connectors then plug the molex into the power supply
 

Read other 1 answers
RELEVANCY SCORE 39.6

I am working on a project and I have a Laptop monitor here that has a 40 pin LCD connector that I am trying to convert to HDMI to plug into an xbox 360. I have gone and looked for an 40 pin LCD to HDMI converter but all I could find was an 40 pin TTL to HDMI. Will this work? https://www.adafruit.com/products/2...2KF8Y_EOnrMVziicEfgwarUPZqSbe_j7LMRoCMFXw_wcB
 

A:Difference between 40 pin LCD connector and 40 TTL connector

Read other 6 answers
RELEVANCY SCORE 39.6

I am wanting to install a new video card. It has a VGA and a DVI output on it. The old card has only a EVC connector on it. From there it goes to a Y cable with 2 CRT monitors (VGA connections) coming off of it.

My question is. Can I use a DVI to VGA adaptor and hook both monitors to the new video card and do away with the T cable?

Thanks Bill
 

A:Can I change from a EVC connector to a VGA connector?

Most definitely. You can down convert form DVI to VGA, but not the other way around (inexpensively, anyway)
 

Read other 1 answers
RELEVANCY SCORE 38.4

Greetings,

I currently have Windows 8 Release Preview, it is my main OS. I have many programs,files,settings,etc.

My question is when the final version of Windows 8 comes out will I be able to upgrade to that version from my current version (Windows 8 Release Preview). What I mean by upgrade is not doing a clean install and having everything put into the windows.old folder.

Thank You.

A:Windows 8 Release Preview -> Windows 8 Final Release.

some minor hints that it won't work, nothing concrete though sorry.

Read other 4 answers
RELEVANCY SCORE 36.4

Putting together a build for a friend, however, I believe the motherboard may have been damaged or was damaged upon my taking part in the build. I assembled the parts, a 430w thermaltake psu, an asus mobo, e5200 intel processor, western digital hard drive, 2 gigs of GSkill, ati hd 4850 gpu and an LG dvd drive.

Posted, gave an error message about cpu fan error, I google it, it seemed to be relatively harmless. While in the bios the computer's signal disappeared, I attempted a reboot to no avail. No error codes, cpu fan stopped spinning. Removed memory, no error code, removed 4850, no error code, case fan connected to the motherboard spins when powered on, motherboard shows green light, no signal detected,

I tested the processor in another rig, and it worked fine, and the cpu fan spun fine. Tested another power supply with said motherboard and the motherboard fan would not spin and it would not post, and no error codes. Is my motherboard dead? Any help would be greatly appreciated. Thanks.
 

A:New Build, Mobo green light, psu powers case fans off mobo, not cpu fan no beeps

check and recheck the connections on the board, if unsuccessful, make sure you haven t short-circuited the mobo, ...
 

Read other 3 answers
RELEVANCY SCORE 36

This problem has the configuration listed in my system specs below, which have just changed recently. My OCZ Vertex 2 died, RMA'ed but sold, and replaced with the Transcend SSD720, 2.5" SATAIII 64GB. Also sold my GPU...

Now, trying to get everything back on track. I reinstalled my OS on the SSD, but I can't for the life of me get the HDMI working. When reinstalling, I knew it was normal for only my Dell CRT to show up via its VGA connection, but then the main ViewSonic HD monitor never came on. I finally realized it wasn't responding to anything. The ViewSonic HD monitor is the only thing plugged in right now, on both VGA & HDMI, but will only work on the VGA. It had been working fine before the OCZ SSD died. No VGA problems. The onboard ATI Radeon HD 4250 is fully updated and all the drivers are installed and updated to the best of my knowledge. There is an update for the BIOS on the ASUS website that I had never installed, ever, but the only change from before was the SSD so that should not matter. I've even made sure I installed the specific driver for the monitor from the disc it came with. I tried playing around in BIOS, and (for once) no matter what graphics device order I set, (i.e., IGPX-PCI-GPX-etc) it always reverted to the mobo's VGA. And obviously, Device Manager is showing no yellow question marks and is generally no help right now...

Again, there is NO longer a standalone GPU/video card in this system, just the ASUS M4A88TD-V EVO/USB3's onboard inter... Read more

A:Mobo not detecting HDMI? - ATI Radeon HD 4250 onboard ASUS mobo

It's plausible that your HDMI port on your MOBO is dead. Is it possible to obtain a GPU and try it's HDMI port?
It could be your monitor as well, do you have access to anything else supporting HDMI and see if your monitor connects?

Read other 1 answers
RELEVANCY SCORE 35.6

Does ATI cards conflict with this mobo?
ASUS A8V DELUXE Socket 939 VIA K8T800 Pro ATX AMD Motherboard
I heard there would be 'cause the mobo is a VIA. Is that true?
Should the mobo conflict with any of these below and forgive me for the video in a CPUs, Chipsets and Mobos board,
SAPPHIRE Radeon 9550 256MB 128-bit DDR AGP 4X/8X Video Card and or
ATI All-In-Wonder Radeon X800XT 256MB 256-bit GDDR3 VIVO AGP 4X/8X
 

A:ASUS mobo in conflict with ATI cards? (reaschering the mobo)

Have you asked ati yet? Read what the mobo manufacturer has to say about it?
 

Read other 15 answers
RELEVANCY SCORE 35.6

Hi all,

I have a MSI k7 pro via kt 266a mobo with an athlon xp1600, served me well, however time has moved on.
1/ MSIs website states the max cpu my mobo can take is xp2100 (upgradeing cpu would be cheapest option). Does anyone know any different?

2/ There are some good "bargains" in mobos, as low as 80 bucks Australian, able to take an AMD 64 3200 , based on SIs chipsets. Of the chipsets available, eg, Sis , Via , nforce, are folk noticing any "real world" difference between them.

I occasionally edit and render video-rendering times not a key consideration and occasionally play Lomac and Il2 flight sims. Thats it. Apart from surf the net.

Your input appreciated. Thanks
 

A:Advice required for mobo update or mobo replacement

i just bought an ecs N2U400-A MB, i already had a couple xtra processors so i didnt need to get the combo, but if I had got the combo, i beleive it came with an athlon xp 2400+ for around $100 american. so far i am very happy with the quality and performance of this new board. BTW, it is an nFORCE2 board
 

Read other 4 answers
RELEVANCY SCORE 35.6

http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&docname=c00753788&dlc=en&lc=en&jumpid=reg_R1002_USEN

The above link is to the HP specs for the machine. The mobo is overheating and yes, i've done all the reg maint stuff. Let's call it dead, bury it and buy a new bride. I did upgrade the video and sound last year but those devices should be good for a few more yrs. This pc is strictly for gaming, music and my embroidery machine software.

I have never replaced a motherboard (nor cpu) before though I've done all else. My concern is that in my eagerness to get this girl back up an running, I overshoot and choose a board that won't support the current devices. I'd love to replace the cpu right now too, but w/ 2 bdays and christmas coming, I can't afford it.

So help me, geniuses. What motherboards would support the pos Pentium D 820 (S) DC 2.8 GHz socket 775, but still allow me to celebrate my 42nd birthday with a new cpu (a quad? ohh ahhh) next april? I have searched and searched, and it's probably staring me in the face, but I can't figure out the mobos.

I'm guessing some of these would work, but again, brain doesn't work as well as it should and I just cant figure it out. http://techreport.com/articles.x/8666/1

Thanks for your help.

Peace,
ohbrandi
 

A:Solved: Replacing ECS RC410-M mobo w/ Intel mobo - help pls.

Read other 11 answers
RELEVANCY SCORE 35.2

Howdy, I'm at my wits end here, and I was hoping one of you could point me in the direction of something else to try.

Working on friend's 2003ish eMachine (ick), because his motherboard chipset heatsink fell off. Used some thermal adhesive to stick the sucker back on, but when i hit the power button, nothing happens. However the motherboard led is on. So I pop in another working PSU that I had laying around, with the same thing happening.

At this point I figure the motherboard got fried, and ordered a no name gateway oem motherboard. I throw it in, and have the exact same issue. I try shorting the power pins to see if it was my power switch, and nada.

It might be that the processor was killed, but wouldn't the psu fan start up in that case? Or I ordered a dud motherboard with the same symptoms?

At this point I'm just not sure what step to take to resolve the problem. Any advice?
 

A:New Mobo LED green, PSU/Mobo fans won't spin

Run the motherboard outside the case with just CPU and memory installed. See if it starts. If not, the CPU could be fried or you have a defective motherboard. I hope you didn't use the old power supply with the replacement motherboard, if you did, you probably fried the 2nd motherboard
 

Read other 4 answers
RELEVANCY SCORE 35.2

I'm upgrading a computer and I'm having difficulties with loading. I am replacing just the mother board, processor chip, and the ram chip. I am re-using the hard drives, cd/dvd drives, and everything else.

I've upgraded from:
an AMD chip to a P4 3.0e w/ HT
an unknown AMD mobo to a DFI PS85-BL ver B1 mobo

I will be using 512 mb ddr 400 pc3200 kingston ram

I already called DFI and they said that I need to unistall the system drivers. Of course, I tried uninstalling all device drivers and then shut down and rebuilt computer. When I booted, the computer asked for safe mode or boot normally. No matter what I select, it automatically reboots.

Any ideas, instructions, or definite fixes?
 

A:Upgrade Issues. Upgrading from AMD mobo to P4 mobo.

Watching over Gotham City...hey it's dark out here

Why Do u Wanna Upgrade to Pentuim 4
Just Asking
 

Read other 6 answers
RELEVANCY SCORE 35.2

Here is my mobo, will be here Thursday.
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157139

I want a Phenom II soon. I then started (after I purchased the motherboard first) got interested in getting an X3 and trying to see about unlocking the 4th core.

I have searched around and can find little information about anything other than Biostar and 790 chipsets unlocking the core.

If anyone has information that could help, it would be greatly appreciated.

Oh and if anyone here has this motherboard, how do you like it?
 

A:New Mobo, quick question (CPU/Mobo Related)

The motherboard looks pretty good... I am an Intel man though
 

Read other 2 answers
RELEVANCY SCORE 35.2

I am trying to put together a Server running for my home.

I have a two computers running socket 939 MOBOS and CPUs. I have enough pieces to put together another computer

CPU
RAM
Mobo
Graphic card

Besides this old gear I have a special server case and RAID card. I tried to get the computer set up a while back and got errors from the MOBO. I made a half attempt to work it out but do not have the time or patience. I figured I would just buy another inexpensive 939 mobo and get it going. Based on the prices I am seeing for this mobo it has turned into a collectors item and worth more now than when they were cutting edge.

Should I just suck it up and pay $150 for a old MOBO or should I upgrade my home theater PC to a newer MOBO, with new Ram and CPU then take that mobo for the Server? That computer runs fine now with a 3800+ CPU, but a newer socket would allow me options for the future without paying a premium for old school technology. If you suggest a newer MOBO, I would appreciate suggestions on which MOBO and CPU for a Micro ATX case good for a HTPC.

BTW I am on the road more than at home so most of my work is done on a newer laptop.
 

A:Socket 939 Mobo or purchase a newer Mobo

You can do mobo/ 2GB RAM and a X2 AM2 for around $150, I would go that route.
 

Read other 3 answers
RELEVANCY SCORE 35.2

I have read several posts about issues with this already.

I had an ECS P4M800 Pro-M V 2.0 with a Pentium 4 2.88. I had a primary and secondary hard drive as well as a DVD RW on it. My brother-in-law originally build the computer some years ago. I got the dreaded call the other day, "Honey, the computer won't turn on."

DOA, fried MOBO. I ordered a Biostar A880 G + MOBO with integrated graphics, audio and LAN cards. Popped in an AMD Athlon 2 X 3 3.3G and two DDR 3 2G Ram sticks.

Fired that puppy up on my old hard drive. It ran through some system checks, and nada. I keep getting back to nothing.

I had a system backup set up to run, but the destination drive ended up being full, (without my realizing it) and now I'm up shit creek becuase the drive won't boot. I've got some important business stuff on that drive, which I know I can recover, but I would just like it to get up and run.

I have the install CD and it is a direct from Microsoft CD. Nothing specific to the old MOBO. What to do???? This was supposed to be my swan song. New computer and I was going to be rocking it out! zilcho.... Please help me out.

A:MOBO baked. Need to maintain 7 OS and files from HD on new MOBO

Describe "I keep getting back to nothing" in more detail.

Read other 9 answers
RELEVANCY SCORE 33.6

Hi
I have an eMachine desktop that Iam repairing for a friend,
we have come to the conclusion (from experience) that because it is dead
even when trying to turn it on that it has suffered from Capacitor Plague
(Perhaps in the PSU then damaging the MoBo)
A new PSU has been tried and it still doesn't work
WHAT Type of 'cheap' motherboard could I replace the current one with?
it has a Celeron processor so we will be looking to conserve that..
I was looking at this...
http://www.ebuyer.com/UK/product/118272/rb/26818414574
or
http://www.ebuyer.com/UK/product/119412/rb/26825319999 (incase his CPU is socket 478)
will this one be compatible?
My friend just wants a cheap solution...
Ive recommended the new PSU / MoBo and extra RAM (at least another 256Mb to
bring it to 512)

any recommendations would be helpful....

thx
 

A:What MoBo can I replace an eMachine MoBo with..?

Read other 6 answers
RELEVANCY SCORE 33.6

Hi...I have a motherboard with a few bulging capacitors and the board is toast IMO...I saw somewhere that you can replace the capacitors though..So I was wondering is it better to get a new motherboard or replace the capacitors ?/ any info is appreciated...
 

A:Is it better to replace mobo capacitors or get new mobo ??

Read other 9 answers