Over 1 million tech questions and answers.

Server 2012 on vmware

Q: Server 2012 on vmware

I have windows server 2012 installed on my vmware running ad, dhcp and dns.
after that I installed the client running windows 8.1.
but when I try to join the domain it says that the domain could not be found.
so I hit ipconfig in my cmd on the windows 8 and it didnt recieve any ip from my dhcp its ip address is169.254.153.23. so basicly my dhcp didnt give me any ip adress since my server is on 192.168.7.128 network subnetmask 255.255.255.192.
in the virtual machine setting I have both network adpters set on bridged: connected directly to the physical network.
when I open the dhcp on my server I have a red arrow pointing down on the ipv4 and ipv6 option but since I cannot ping my server at all I dont think its my dhcp but my vmware network.
does somebody know how to fix this?

sorry for my bad english

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Server 2012 on vmware

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 76.8

Hello

Today I have download Microsoft server 2012 from Microsoft website.
There the link- Download Windows Server 2012

When I install on my Vmware Player it is showing me "Windows cannot find the Microsoft software License Terms.Make sure the installation sources are valid and restart the installation."

I have tried many times but I am getting same error.

Please anyone can help me to solve this problem.

A:Unable To Install Windows Server 2012 On Vmware Player

Hi, I replied to your duplicate thread. Delete one or the other.
Unable To Install Windows Server 2012 On Vmware Player

Read other 1 answers
RELEVANCY SCORE 69.6

Hi all,
Good morning everyboday. I would like to ask one question to clarify? So, anyone please suggest to me. 
In my network, I used dell rack server with Vmware ESXi Hypervisor. Then, I have create Windows Server VMs on that Hypervisor. In these day, we are hear many information about "Meltdown and Spectre Vulnerability".
I have read to protect such vulnerability. But, I am a little confuse it. Do I need to make security update on both Vmware Hypervisor and Windows Servers? If I make security update only Vmware Hypervisor, is it not enough? 
Anyone please suggest to me for such condition. Thanks you.

Best regard,
Phyo Sithu

Read other answers
RELEVANCY SCORE 65.2

Hello!

I've a broadband link of MTNL with D-Link DSL 502T modem, and a m/c with Windows XP as primary OS and over it running VMWare server ver 1. I''ve loaded Ubuntu 10 server over VMWare and made it as the DNS / Web Server, I've got domain name registered against a static IP.

Now the problem I'm facing is that whenever I try to open the web-page of my web-server, I receive Modem Configuration page instead of web page I loaded on the server, although my Apache 2 server is running fine.

Can some one help me tell how to configure so that it directly fetches the web pages loaded in the web server instead of modem configuration page.

Thanks and regards

Vasu102
 

A:Config of D-Link 502T with VMware on WinXP, Ubuntu Server on VMWare!

If this is from a remote location, are you sure you have disabled remote administration in the router?
 

Read other 1 answers
RELEVANCY SCORE 58

VMWare workstation 2012 public technology preview is availabe
for download now.
You can check out the new functionality before it is released.
http://communities.vmware.com/community/vmtn/beta/workstationtp2012
 

Read other answers
RELEVANCY SCORE 58

Hi
I am working with windows 8 and I have installed SQL server 2007 and visual studio 2010. Now I want to upgrade these setups to SQL server 2012 and visual studio 2012. what is the advantages of what i want to do and how can i do it easily without corrupting the operating system? Please help.

A:Installation of sql server 2012 and visual studio 2012

SQL Server has an upgrade option that is pretty painless. Just run the setup file from your 2012 installation media and click the upgrade option. It will ask you what instance to upgrade, run some checks, and then upgrade it for you.

Visual Studio is a little different. If you install 2012 without uninstalling 2010 first, you will simply just have both versions to choose from. You can completely uninstall 2010 before installing 2012 by finding your 2010 installation file and adding the uninstall and force switches when running it(ex. "C:\vs_ultimate.exe /uninstall /force").

If you keep 2010, 2012 will ask you if you wish to import your settings and whatnot from 2010. If you uninstall 2010, 2012 will just have it all when you open it for the first time.

Read other 1 answers
RELEVANCY SCORE 55.2

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 54

The following Structure is a representation;
PC1 - IP 10.0.0.10 - FQDN PC1.DOM.LOCAL
PC2 - IP 10.0.0.20 - FQDN PC2.DOM.LOCAL
SRV1 - IP 10.0.0.5 - FQDN SRV1.DOM.LOCAL - File Share 'FLDR1' / USR1<ReadOnly>


SRV1 has a folder, FLDR1, being shared for read only access to user USR1.

PC1 and PC2 logged on as Domain User USR1.
PC1 is able to connect to SRV1 to see and look in FLDR1.
PC2 is unable to connect to SRV1 to see and look in FLDR1.
Now there are multiple means of connecting to SRV1 to see the share FLDR1.


The following connections were done in combination with the following methods;
Method 1 - via logged on Domain User CMD Prompt with 'NET VIEW'.
Method 2 - via logged on Domain Administrator CMD Prompt with 'NET VIEW'.
Method 3 - via logged on Domain User Explorer Window.
Method 4 - via logged on Domain Administrator Explorer Window.

Connection 1 - via Server Name.
Connection 2 - via Server IP Address.
Connection 3 - via Server Fully Qualified Domain Name.


Now that the stage is set, going to the fun part...

Testing from both PC1 and PC2...
-------------------------------------------
PC1 : Method 1 - Connection 1 - Success
PC1 : Method 1 - Connection 2 - Success
PC1 : Method 1 - Connection 3 - Success
PC1 : Method 2 - Connection 1 - Success
PC1 : Method 2 - Connection 2 - Success
PC1 : Method 2 - Connection 3 - Success
PC1 : Method 3 - Connection 1 - Success
PC1 : Method 3 - Connection 2 - Success
PC1 : Method 3 - Connection... Read more

Read other answers
RELEVANCY SCORE 54

Created RAID1 and RAID5 on my Physical server
Created a
Bootbale  USB to install  ISO Window 2012 r2 on supermicro x9drl-if Server.

But it is returning with an error:




fouad.lahoud

Read other answers
RELEVANCY SCORE 54

Hi Experts,
Could someone please help me how to copy file from Windows 2012 server to Linux using rsync.

Read other answers
RELEVANCY SCORE 54

We run a web proxy server on our network for internet access.
On client machines (running Windows 2012 R2) I have configured the proxy server setting in Internet Explorer "Tools\Internet Settings\Connections\LAN Settings" to point at the designated web proxy server.
When attempting to browse websites from IE I receive the "The proxy server isn't responding" error.
Conversely, browsing the same sites via Google Chrome and Firefox (installed on the same client server) return web pages without error.
In addition, if I run Internet Explorer as administrator (Right Click\Run as Administrator), I am able to browse web sites without receiving the error.
It would appear that the issue is isolated to browsing via IE when not run in elevated mode.
Has anyone come across this issue?

A:Server 2012 R2 - Internet Explorer Proxy Server Issue

Hi Dicki,
First, please try to reset the Internet Explorer. Some plug-ins may affect the proxy.
If it doesn't work, please try to perform a network capture on the client.
Please check if the client send the http traffic to the proxy server at the correct port.
If the client has sent the http traffic to the proxy server, please check if there is any warning or error in the proxy server.
To download Network Monitor, please refer to the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 2 answers
RELEVANCY SCORE 53.2

Hi All,

I need some urgent help if possible.

I've got a vmware server at work and I took a snapshot a few months back. Since then I've done a lot of work without taking another.

By mistake I clicked on revert to snapshot and I've totally lost the current state. I tried clicking it again but it takes me to an even older one.

Is there any way of getting the recent state back up??

Any help greatly appreciated.

Thanks
 

Read other answers
RELEVANCY SCORE 53.2

I was thinking about putting vmserver on one of my computers. I never used this SW before and I was wondering if anyone here has? If so, how do you like it? Is it hard to use? How much HDD space I need and does it make a difference how much RAM is in the computer? If so, how much do I need, please?

i appreciate any help given.
 

A:vmware server

Read other 7 answers
RELEVANCY SCORE 53.2

Hello All,

I am making my HTPC duo as a Virtual Home Lab to help me attain certifications (MSCE etc,.)

Pentium D 3.4ghz dual core
3Gb of Ram

I installed VMware server.

How hard would it be to install 3 server 2008 OS's? any advice? I'll be setting up a domain with maybe a Primary DC (512mb ram), Secondary DC/GC whatever(512mb ram).. plus maybe an exchange server 2010(1gb ram) leaving 1gb for OS.

If anyone has done this I could use pointers/tips
 

A:VMware Server

I haven't personally tried such a configuration, but your system requirements just don't seem up to the task of running 3 Windows Server 2008 systems simultaneously including one with Exchange. VMs require a significant amount of resources. RAM is just one. Processing power is another. You can give it a shot, but I have a feeling your computer will choke.
 

Read other 1 answers
RELEVANCY SCORE 52.4

I have installed VMWare server (the next to the latest version - don't know the number) and Ubuntu 7.04 in it, and finally got them working properly, with Ubuntu taking up the whole screen and VM's toolbar hidden at the top until I bring it down with my cursor (briefly have 2 cursors, of course), BUT whenever I use this setup and then close the server (and Ubuntu, of course), then try to shutdown Windows XP and exit, Windows gets to the "shutting down" screen and freezes. I then have to unplug the computer, plug it back in , restart Windows and then exit, a process I am sure is not good for the computer, and is at annoying at best. I have 218 gigs free space on my hard drive. My memory is 1022MB - could this be the problem. I have heard that vm's are memory hogs, but why would it be causing problems after I've shut it down?. I have looked at VMWare's forums, but I didn't understand all that geekspeak. There was one thread there from 2005 that mentioned a similar problem, but got no answers. If anyone has any suggestions, I'd appreciate it, as I'd hate to have to uninstall the thing.
 

Read other answers
RELEVANCY SCORE 52.4

Heya,

I'm running Vista Ultimate x64.

I tried to install VMWare Server when I came across a very big problem.

It has 4 drivers that weren't installed b/c Vista x64 requires that they be signed.

Is there a way around this, or am I just not allowed to have VMWare Server?

If it's not possible, I'm open to other alternatives. Assuming it's free like VMWare Server. :P

thanks!

A:VMWare server & Vista x64???

The Drivers are:

VMware kernel driver

VMware USB monitor

VMware network API driver

VMware bridge driver
Obviously these are pretty important, so I need to find a way to get them in there, without having to do the F8 option on every boot. These drivers are 64-bit, so did the publisher just not sign them?

Read other 6 answers
RELEVANCY SCORE 52.4

I want a download like for vmware esxi server 2.5 version which support 32bit operating system

Read other answers
RELEVANCY SCORE 52.4

For those of you who use this software can you please tell me the latest version please?

tia
 

A:Solved: VMWARE server

From the solved tag, I presume you already have the answer?
 

Read other 3 answers
RELEVANCY SCORE 52.4

I am using VMWare Server 2 on my Windows 7 Workstation.

Guest OS is FreeBSD, but it is not important.

I could not connect to any host (except master IP) from Guest OS when I am using NAT. But I can ping any host. I have not problems when I use bridget network.

I have tried to disable Windows Firewall - no changes.

This configuration has worked in Windows Vista ideal. I have submited feedback to MS.

May be anybody have any idea?

A:VMWare Server NAT problem

Seems like the same trouble I?ve been having.

I run Ubuntu and Fedora with VMware Workstation, and I can ping all I want, but thats it. Only way I can get it to work is running bridged.

I prefer bridge tho, so it dosen?t matter to me. But youre not the only one with problems running NAT networking on VM guest.

Read other 9 answers
RELEVANCY SCORE 52.4

Error: I cannot Open the GUI after logging into root.

Case:
I'm learning about VoIP server by myself at the moment. I followed the instruction of the freePBX tutorial
.
Following the video, my only adjustment is the IPv4 address:
_My PC: IP: 192.168.0.103, Gateway: 192.168.0.1
_FreePBX: IP:192.168.0.107, Gateway: 192.168.0.1, Name server: 127.0.0.1
After I reach 8:30 of the video
.
I opened Google Chrome and enter the freePBX address IPv4 but I says "this sites can't be reached". I cannot ping the VM IP address from my computer, either. After I restart the FreePBX Virtual machine, I also encounter this error too but I can skip it by pressing Ctrl Alt F1: Installing FreePBX as a Virtual machine
If you need any more info, feel free to ask and thanks for helping me, really appreciate it. I am really in a hurry so anything will do at the moment.

PS: I also try Elastix 2.5 and encounter the same problem. I think the problem is in configuring the VM networking

My System info:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1 Pro, 64 bit
Processor: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8175 Mb
Graphics Card: NVIDIA GeForce GT 610, 1024 Mb
Hard Drives: C: Total - 299899 MB, Free - 113068 MB; D: Total - 653866 MB, Free - 34535 MB; H: Total - 953865 MB, Free - 29278 MB;
Motherboard: Gigabyte Technology Co., Ltd., Z68M-D2H
Antivirus: Windows Defender, Disabled
&nbs... Read more

A:installing PBX server on VMware

Did you set up the network in VMware to allow the VM to talk out on the physical network? What VMware are you running? ESXi? Workstation? Did you try doing a ping test to something on the network from the VM through the console/CLI?
 

Read other 3 answers
RELEVANCY SCORE 52.4

I just installed VMware server 2.0.2 on Windows XP. It went fine as far as I know but what do I do now. I clicked on "VMware server home page" and it goes to this url "https://myhost:8333/ui/" How do I get that webpage that is supposed to show up to actually show up? I've been looking on threads on google for a while. I don't see a way to solve this..
 

A:vmware server 2 won't connect

What are you planning on doing here? I think you're getting distracted with the "home page" question.

What you need to do is create a "virtual drive" then install an operating system into it, thus creating a VM or "virtual machine".

Here's a tutorial:

http://software.intel.com/en-us/articles/creating-a-virtual-machine-on-vmware-tutorial/
 

Read other 3 answers
RELEVANCY SCORE 52.4

Hello, I own my own IT consultation and management company and I have a few clients whom I will be upgrading their Servers to Server 2012. I thought it a good idea to have a place on this website to talk about and gives tips about Windows Server 2012. Please Fill out the poll so the Moderators can see what kind of interest the community has in this suggestion. Thanks!

A:When are we going to start a Server 2012 (Server 8) Forum?

Not a lot of interest unfortunately. Let me think about it and I will see what we can do.

Read other 2 answers
RELEVANCY SCORE 52

An important VMware security update is now available:VMware ESX Server Multiple Vulnerabilities http://secunia.com/advisories/22875/Some vulnerabilities, security issues, and a weakness have been reported in VMware ESX Server, which can be exploited by malicious, local users to bypass certain security restrictions and disclose potentially sensitive information, or by malicious people to cause a DoS (Denial of Service) and potentially compromise a vulnerable system.Original Advisory:http://www.vmware.com/download/esx/esx-253-200610-patch.htmlhttp://www.vmware.com/download/esx/esx-254-200610-patch.htmlhttp://www.vmware.com/download/esx/esx-213-200610-patch.htmlhttp://www.vmware.com/download/esx/esx-202-200610-patch.htmlVMware ESX Server x87 Register Information Leak http://secunia.com/advisories/22876/A security issue has been reported in VMware ESX Server, which can be exploited by malicious, local users to disclose potentially sensitive information.Original Advisory:http://kb.vmware.com/kb/2533126

Read other answers
RELEVANCY SCORE 52

I downloaded Virtual PC 2007 from Microsoft and am using XP Pro SP1 as the guest. I need to use usb and access the internet within this Virtual PC but cannot - I read online where I had to download a program from VMware called VMware converter to somehow add the existing Virtual PC file and enable it to have usb support and sound, even though they are disabled by default i can change them once VPC converter is installed. And how can i get access to the internet within the Virtual PC if running XP Pro and the notebook itself has a wireless card built in?

Thanks for any help I can get - I would like to get this thing up and running before this Tuesday.
 

A:Virtual PC & VMware converter server

Read other 6 answers
RELEVANCY SCORE 51.2

I have a Win 2003 server, standard edition, 32 bit. This server has 2 x dual core xeons and 12GB of ram. Currently I run several VMs off this machine via VM Server. I have been thinking about migrating to Windows 2008 64 bit and using HyperV instead of VM Server.

First going from 32 bit to 64 bit on the host OS, would that give me any performance boost? Second, how do the two virtual products compare? I have been hearing great things about HyperV.

I am not concerned about cost since I am in Education and get very good pricing on MS products.

Should I just keep things like they are? Reinstall with Win 2008 64 bit on host OS? If so then should I use VM Server or Hyper V?
 

A:Stick with VMware server or move to Hyper V

With 12GB of RAM, I think you'll see a significant performance boost using a 64bit system since you then avoid PAE.
 

Read other 2 answers
RELEVANCY SCORE 51.2

Hi all,

My first post - please pardon any snafus of etiquette

Could somebody provide a list of all the drivers that would need signing?

Would the following method work:
1. Use F8 to stop requiring signed drivers
2. Install VMWare server on Vista 64
3. Use method from ATI Radeon HD 4870 4850 3850 3870 2900 2600 NVIDIA GeForce 280 260 9800 9600 8800 8600 - NGOHQ.com to sign necessary drivers
4. Reboot without F8 - presumably the signed drivers should now function ??

If this seems reasonable - is there a complete list of drivers that I ought to go sign in 3) above?

What's the gotcha?

Thanks,

rao

Read other answers
RELEVANCY SCORE 51.2

I recently migrated my MDT/WDS server from a physical machine to a VMware virtual machine. Prior to migrating it, my PXE TFTP transfers took less than 20 seconds and they are currently taking a few minutes. Nothing in my environment changed other than
migrating to the virtual. Additionally, after migrating to VM my boot.wim loads and boots but does not run the start of my task sequence. This happens intermittently, sometimes a reboot or two fixes the issue and the task sequence runs without any issues.
I have attempted to change my max TFTP block sizes to 16784 but this had no effect. I am only running these deployments in unicast with a max of three or four machines pulling images. Today, for instance I have two machines on my bench. One imaged fine,
the other wont contact the Deployment server. It does not even register with the MDT monitoring server. Not sure what else can be done. I have not done any packet caps but given that nothing in my network changed I am not sure that would yield any results. 

Read other answers
RELEVANCY SCORE 51.2

I have hp laptop running vista home premium. I am unable to install windows 2003 server as a guest OS through Vmware. can anybody tell me how to do it?

Read other answers
RELEVANCY SCORE 50.8

I was looking to use full gateways to receive port mirroring from server core domain controllers
Problem:
- gateway and domain controllers need to be on same host - which bad for redundancy
- lightweight gateway not supported on server core
Any ideas other than a full gateway server for each domain controller?
thanks!

Read other answers
RELEVANCY SCORE 50.8

Hi there.

I LIKE the idea of a bare metal Hypervisor - I've tried Esxi (VMware) in the past and although it works it's a bit fiddly on what hardware it works on and there's no CLI for managing VM's --you have to do this with a separate machine using vCenter which USED TO BE FREE -- and now this part is NOT available in the free offering any more (if you upgrade to the latest version of ESXI (5.5) you won't be able to manage / modify VM's any more - at least in the FREE offering -- you have to BUY the latest vCenter -- so I've now junked Esxi.

It seems from Internet discussions that Free ESXI might be being phased out anyway so a good time to jump ship to Ms.

Read this :

https://communities.vmware.com/message/2295098

Does 2012 HYPER-V SERVER R2 (it's FREE BTW) work decently as a hypervisor -- I'm only really interested in running Windows VM's.

I actually quite like W2012 SERVER but I don't really need the full server edition for hosting VM's. I want to use W2012 server as a VM anyway.

I've been quite a happy user of VMware workstation in the past but it's quite expensive and needs a full blown OS to run on even though it can now run VM's in the background.

I need to run the following Guest OS's (or VM's) on it ===> W2003 server, 2 XP PRO VM's (one ENG, on ISL), one W7 Enterprise, one W8.1 Enterprise and one W2012 server .

The Host machine has plenty of RAM and storage and has a decent 3.2 GHZ QUAD processor in it so running these VM's should be fine in theory... Read more

A:HYPER-V SERVER R2 (Esxi 5.5 needs PAID vCENTER - vmware)

Vcenter server was Never free Jimbo.

You can still use the existing client to manage vms on the free esxi 5.5, but you need to be sure that you do NOT upgrade the vm hardware on these VMs to version 10. Even newly created vms will start as version 8, it's a manual process to upgrade them and it comes with a warning that the web client will be required.

I'm actually pretty surprised this is being handled this way, but it's not likely a big issue unless you ignore the warnings.

HyperV was never a product I liked. Prior to Windows 8, remotely managing vms was a total nightmare with a bunch of dcom stuff you had to manually set up. It's still a crapshoot whether a Linux vm is going to work. I steer clear of this supervisor.

Citrix Zen server is a free product. Pretty good too.

Read other 6 answers
RELEVANCY SCORE 50.8

Masters,  First of all the environment:  - RDP conecttion to Windows server 2008R2 Terminal servers runnin' on Vmware. We bougth  four HP T520 because we would like to replace all other (no-brand, wyse, fuji..etc..) thin clients... Unfortunatelly we can't figure out how to redirect/mount (i don't know which one is the correct) the plugged USB (forexample Nikon Coolpix camera and standart USB pen-drives.)  One time i successfully redirected USB drive, but i don't know what i did. But i never succed to redirect the Nikon Coolpix.  In the client usb menu i see the client recognise the device but can't redirect to server. I really apperitiate the help. Regards

Read other answers
RELEVANCY SCORE 50.8

I have installed VMWare server (the next to the latest version - don't know the number) and Ubuntu 7.04 in it, and finally got them working properly, with Ubuntu taking up the whole screen and VM's toolbar hidden at the top until I bring it down with my cursor (briefly have 2 cursors, of course), BUT whenever I use this setup and then close VM Ware (and Ubuntu, of course), then try to shutdown Windows XP and exit, Windows gets to the "shutting down" screen and freezes. I then have to unplug the computer, plug it back in , restart Windows and then exit, a process I am sure is not good for the computer, and is at annoying at best. I have 218 gigs free space on my hard drive. My memory is 1022MB. If anyone has any suggestions, I'd appreciate it, as I'd hate to have to uninstall the thing since I've apparently got it to working.
 

Read other answers
RELEVANCY SCORE 50.8

Hi guys

Can you please have a look into the attachments and see if you can see any issues to resolve this major problem

If I log into DRSM I don't get the issue so you think there is a problem with AD however, I have checked the integrity and all looks ok
I have also moved the logs and the database

I disable all services other then M$ and it will boot again, restart the machine several times and still can't get it BSOD

Any help would be much appreciated

A:BSOD on bootup on vmware 5.0 guest SBS Server 2011

Code:
USTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT_SERVER

BUGCHECK_STR: 0x1E

PROCESS_NAME: SavService.exe

CURRENT_IRQL: 0

EXCEPTION_RECORD: fffff8800c29d648 -- (.exr 0xfffff8800c29d648)
ExceptionAddress: fffff88004d6403a (mrxsmb10!MRxSmbDeferredCreate+0x000000000000018a)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000058
Attempt to read from address 0000000000000058

TRAP_FRAME: fffff8800c29d6f0 -- (.trap 0xfffff8800c29d6f0)
Unable to read trap frame at fffff880`0c29d6f0

LAST_CONTROL_TRANSFER: from fffff80002a94bbe to fffff80002a9d190

STACK_TEXT:
fffff880`0c29c728 fffff800`02a94bbe : 00000000`00000000 fffff880`04d48e50 00000000`00000000 fffff800`02af36cb : nt!KeBugCheck
fffff880`0c29c730 fffff800`02ac7e2d : fffff800`02ca18ec fffff800`02be3f88 fffff800`02a1e000 fffff880`0c29d648 : nt!KiKernelCalloutExceptionHandler+0xe
fffff880`0c29c760 fffff800`02ac6c05 : fffff800`02be3f80 fffff880`0c29c7d8 fffff880`0c29d648 fffff800`02a1e000 : nt!RtlpExecuteHandlerForException+0xd
fffff880`0c29c790 fffff800`02ad7b81 : fffff880`0c29d648 fffff880`0c29cea0 fffff880`00000000 00000000`00000000 : nt!RtlDispatchException+0x415
fffff880`0c29ce70 fffff800`02a9c842 : fffff880`0c29d648 fffff8a0`030447a0 fffff880`0c29d6f0 fffff8a0`168a12d0 : nt!KiDispatchException+0x135
fffff880`0c29d510 fffff800`02a9b3ba : 00000000`00000000 0000000... Read more

Read other 9 answers
RELEVANCY SCORE 50.8

Hello,
I created the following performance counter using logman.exe. 

logman.exe create counter US_Triton_Perf_Log -b 9/23/2015 09:30:00 -e 9/30/2099 18:30:00 -r -s $server -si $frequence -cf $folder\$server.txt -f $logtype  -o C:\local\logs\Perfout_$Server --a -v mmddhhmm  -rf  $max_duration

When I do this across multiple servers specifically for Windows Servers 2008/2012, the counter is created to repeat and run everyday at 930PM and stops running everyday at 430PM. This works perfectly fine as intended. However, When I do this for a Windows
2003 server, my created counter is very different.
For example, in this case, I have set to the counters to start at 930AM and end at 1830PM, because I have set a maximum duration of 9 hours, the job terminates and begins on the next day, since I have the repeat option on. However, this does not apply to
our 2003 server; logman creates the job to run once a week in this case it would be on a Wednesday. In addiiton, I noticed that the job doesn't not even start at it's indented time. It actually does not start at all. I also notice that the jobs on all windows
2003 servers are created in a pending status, which then prevents me from removing the counter remotely. 

I would like to know if windows 2003 is capable of working like my win 2008/2012 servers using logman, and if historically, the job has to be kicked off through scheduled task. 




Both Jobs are using the same criteria, but a... Read more

Read other answers
RELEVANCY SCORE 50.8

Red Shield - IE Enhanced Security Configuration for Administrators
Amber Shield - IE Enhanced Security Configuration for Non-Administrators
Green Shield - IE Zones
When I click on the how to correct this it takes me to a Windows 2003 page not 2012 for the first issue

And page does not exist for the second issue ?
Any ideas ?

Read other answers
RELEVANCY SCORE 50.4

I have a PC with XP Pro but I want to install Vista as well so I can get the hang of it a little more. I have read some about VirtualPC and am thinking about installing that. Can anyone tell me what program would be best to use? Also, how exactly do you go about installing multiple operating systems on one machine? Is there a pretty easy guide for these programs? Any recommendations on specs? I have a AMD 64 X2 3800+ with 1 GB Ram but upgrading to 3 GB this week. I have onboard video that has I believe 256 of shared memory. Thanks for the help guys.

A:Testing Microsoft Vista (VirtualPC, VMWare, Virtual Server?)

Hey !

I did the tests at work cause they need to test before install vista on some workstations, I used Microsoft Virtual PC wich you can dld free and it's free ! Very easy to do...

Regards
Sergio

Read other 1 answers
RELEVANCY SCORE 50

Hi,
I would like to know how to configure a Windows Server that will host a windows Diskless Client, I've read a lot of forums and blogs regarding this subject and I even tried to applied those summarized guide but until now I'm still stuck, and I hope someone
in this forum can help me or give me a detailed guide to this particular subject. I would really appreciate whatever suggestion or support that may give to me. 

Thank you,

Read other answers
RELEVANCY SCORE 49.6

Basically what the title says. Here is the layout:

1. Comcast modem -> home router/default gateway (linksys e2000) - 192.168.1.1 -> unmanaged netgear hub
1a. from unmanaged hub, everything has a 192.168.1.x address with a subnet mask of 255.255.255.0 (PCs/laptops/wifi, etc)
2. From unmanaged hub, to the cisco 2950 switch
2a. setup vlan1 to be a 192.168.0.x network (default gateway 192.168.0.1) with a subnet mask of 255.255.255.248
2b. Cisco switch has a Dell Poweredge 2950 II & a Rackable systems JBOD system, was going to set the IP of VMware ESXi as 192.168.0.3, the web server as 192.168.0.4 & the JBOD as 192.168.0.5

So far I have gotten to logging into the Cisco switch and setting the vlan1 as IP address/subnet mask as shown above. But when I set the static IP in the ESXi/web server, they are not getting connectivity. This may have something to do with routing from the home router because when I try and do static routes, it won't let me do it from a 192.168.0.x network. Not sure where to start, starting from a novice to intermediate perspective, but had some spare parts and wanted to start this project. Any help would be appreciated. Thanks in advance, and let me know if you need more information.

Regards,
Rob
 

A:Segregating vmware web server from home network using cisco 2950 switch

dijitaljedi,
Welcome to TSG.
Your Default Gateway, 192.168.1.1 (linksys e2000) is not seen by your 192.168.0.1 network. As you stated you need a router to route between the networks.

The easy way is to stick with the 192.168.1.0 255.255.255.0 network, all of your 2950 switch ports are in VLAN 1 by default , so it should plug and play. The devices you want static can be set to the top of the current range 192.168.1.254, 192.168.1.253 and so forth, the DHCP on your router will issue 192.168.1.2, 192.168.1.3...

The hard way http://www.dd-wrt.com/site/index

This should be done carefully, as you can turn a perfectly good router into a paper weight.
 

Read other 3 answers
RELEVANCY SCORE 48.8

Hello HP forum,I want to deploy a wds server with the Thinclient recover tool.So that i can reach the image without usb stick, and from another location.I hope you can help me with this.Kind regards,Marc

Read other answers
RELEVANCY SCORE 48

Hello,
 
I've been going crazy trying to help troubleshoot a BSOD.  I've used Bluescreenviewer to analyze the dump files, but I can't find a good solution.   I've attached images of the dump files from bluescreenviewer, and done searches on the errors referenced, NTOSKRNL.EXE and STORPORT.SYS.  We've updated all of the drivers, but I'm about to recommend driver verifier as well.  Please help!
 
Thanks,
 
cxzander

A:BSOD in server 2012 R2

These are both STOP 0x133 errors.  There's a bit of info on them on my webpage here:  http://www.carrona.org/bsodindx.html#0x00000133
Even more articles here (eventually I'll put them on my webpage:0): 
https://www.sysnative.com/forums/bsod-kernel-dump-analysis-debugging-information/11184-dpc_watchdog_timeout-debugging.html
https://www.sysnative.com/forums/bsod-kernel-dump-analysis-debugging-information/9310-dpc_watchdog_violation-0x133.html
https://blogs.msdn.microsoft.com/ntdebugging/2012/12/07/determining-the-source-of-bug-check-0x133-dpc_watchdog_violation-errors-on-windows-server-2012/
https://bsodtutorials.wordpress.com/2014/02/12/debugging-stop-0x133-and-dpc-internals/
http://bsoddebugging.blogspot.com/2014/09/0x133-dpcwatchdogviolation.html
 
Please run this report collecting tool so that we can provide a complete analysis:  http://omgdebugging.com/bsod-inspector/
When done a Notepad document will open with the name of the file and it's location. (By default it'll be a .zip file located on your Desktop)
Simply upload the .zip file with your next post and we'll move on from there.

If it doesn't work for you, then please try this:  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/
It's OK to ask for Driver Verifier if this isn't a production server (as it'll create downtime and also may slow the system down).
If it is, see if they can schedule some time to run Driver Ver... Read more

Read other 0 answers
RELEVANCY SCORE 48

Hi, some time ago I deployed two servers for a small RDS environment.  They are both physical servers, session-based RDS.
I want to now get USB Redirection to work on them to enable the use of WebCams.  Looking through all the literature and articles, I get the impression that I need Hyper-V installed.  Is this true?  Was my initial deployment setup incorrect
or can I just add the Hyper-V feature now?   I am worried if I install that role that it will change the architecture of my setup.
Can someone please advise.
Many thanks

Read other answers
RELEVANCY SCORE 48

Hi 
I have recently installed a server 2012 and configured remote access and users are able to access RDP from all clients. Recently Windows 7 machines are not able to access the remote desktop, its shows an error "This computer can't connect to the remote
computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator. " I have disabled the network level authentication from local policy but the issue still exists.
Windows 10 machines are able to connect the remote desktop.  
Please help me to resolve the same. 
Thanks.

Read other answers
RELEVANCY SCORE 48

I want to network the server LG Ncomputing monitors directly on our Local network using Cat 6 Ethernet cables, so that I could use the same software licenses as on server with around 4 more users connected. (My Computer monitor has a Cat 6 cable point with the Keyboard and mouse points too)

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1 Pro, 32 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2911 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family (Microsoft Corporation - WDDM 1.1)
Hard Drives: C: Total - 83113 MB, Free - 53941 MB; D: Total - 34579 MB, Free - 3989 MB; E: Total - 34579 MB, Free - 10957 MB;
Motherboard: Sony Corporation, VAIO
Antivirus: Windows Defender, Disabled
 

Read other answers
RELEVANCY SCORE 48

I have just installed Windows 8/8.1 - first time user
I just installed SQL Server 2012 and rebooted.

I can't find where SQL Server management studio is located. I've looked on the start screen and I've looked on the Desktop. I can't find an Icon to run it anywhere.

Any ideas?

A:Can't see SQL Server 2012 icons

While in the Start screen type "sql" and see if anything pops up. If so, and it's what your looking for, pin it to the Start screen.

Read other 2 answers
RELEVANCY SCORE 48

Hi all,

I've just purchased a HP micro server (?100 cashback deal) as want to learn windows server 2012 and also look to setup a home server.

can anyone recommend or point me in the direction of books, videos on where i can learn about installation / setup and maintaining a server setup for either home and in a business environment?

Many Thanks
andrew

A:windows server 2012

  
Quote: Originally Posted by ascomputers


Hi all,

I've just purchased a HP micro server (?100 cashback deal) as want to learn windows server 2012 and also look to setup a home server.

can anyone recommend or point me in the direction of books, videos on where i can learn about installation / setup and maintaining a server setup for either home and in a business environment?

Many Thanks
andrew


What version of server 2012 do you have? Also what client operating systems do you have? Windows 7 Home premium, professional, ultimate?

This can affect what services you can offer to clients.

Josh

Read other 9 answers
RELEVANCY SCORE 48

Hello 8forums,

Really great forum here and I'm glad to join. If I posted this in the wrong section I apologize.

Okay now here's my problem. I'm currently trying to setup Windows Server 2012 for my dad. The main thing it will be used for is storage of movies, photos and backing up Excel documents for work. This is a copy a friend burned him onto a disk and is currently NOT activated. He wanted to check it out before purchasing the license. I have installed it onto an old HP Pavilion a1640n and everything went fine with installation but, now that it is installed I cannot connect his Win8 computer to it. I have Googled this and found a method but, it doesn't work. I'm told to open a browser and enter in the address bar " HTTP://Server-name/connect " (Server-name replaced with then name of his server) and I should get a connector software download page. I do not get this software download page I just get a server not found page. I have tried entering other possibilities into the address bar, too (192.168.0.xxx/connect, adding .com etc.) nothing works. If I can get any help with this it would be appreciated.

I have tried:

Completely reinstalled Windows Server 2012
Reinstalled Ethernet drivers on the WS2012 box

Things they may be causing the problem:

As I said the Windows Server 2012 is not activated.
The WS2012 box is stuck on public network type and the W8 box is stuck on private network type.
The WS2012 box does not show up on my network on the W8 box but,... Read more

A:Windows Server 2012 Help

Are you trying to access the server from a remote location using a local IP non outside routable address? Why are you trying to go through IE to get to the server?

Read other 3 answers