Over 1 million tech questions and answers.

DRIVER POWER STATE FAILURE WINDOWS 8 LENOVO Y510P

Q: DRIVER POWER STATE FAILURE WINDOWS 8 LENOVO Y510P

I need assistance on my laptop. frequently it's been shutting down and has been showing this error message: "DRIVER POWER STATE FAILURE" I've tried some online resources but it hasn't really helped. If there's a way to find this log so I can post it here, please tell me how to do so. Any assistance would be very much appreciated. Thank you.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: DRIVER POWER STATE FAILURE WINDOWS 8 LENOVO Y510P

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 100.4

Hi folks,

for a few weeks I am experiencing a strange problem with my Lenovo L420 laptop running on Win7 x64. Generally it runs pretty smoothly under normal circumstances. I had no problems with week-long uptimes before.
However, from time to time when the computer automatically goes to "sleep" or "power save" mode (or when I close the laptop lid) it freezes with a "Driver Power State Failure" BSOD.

One observation is that this problem is apparently correlated to memory load and/or system load. In fact, the BSOD is more likely to occur the more programs or browser tabs are open in that very moment.

Here is my PC information:
Windows 7 64 Bit
What was original installed OS on system? Windows 7 64 But
Age of system (hardware) - Bought in sept '11, according to the label its July '11
Age of OS installation, have you re-installed the OS? - Sept '11, no

CPU - Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz
Video Card - onboard Intel(R) HD Graphics 3000
MotherBoard - Intel HM65
Power Supply - Sorry, no idea
System Manufacturer - Lenovo
Exact model number (if laptop, check label on bottom) - please check attached picture

I attached the last several crash dumps.

My own personal analysis of these dumps did not lead to any consistent finding. To me (as a relative uneducated computer guy) it seems that in each crash a different driver is causing the problem... A google search turned out some people with similar problems, but to date I ... Read more

A:Driver Power State Failure, Win7 x64, Lenovo Thinkpad L420

In every case your Realtek NIC (network controller) seems to be causing the problem, with the exception being the latest two crashes, which blame your wifi. They may be interfering with each other. Make sure to update the drivers for both. They are dated from June/April.

Read other 7 answers
RELEVANCY SCORE 100.4

He there,
I found a couple of similar threads, but I could not solve my problem yet.
Since a bought this laptop almost a year ago I have random system chrashes with a "Driver Power State Failure".
Sometimes it seems especially when I use lots of programms at the same time and always when the computer automatically goes to "sleep" or "poer save mode" (or when I close the lid).
What can I do to solve the problem or where is the problem exactly?

Kind regards
Dschi

Lenovo Thinkpad X220
Windows 7 64 Bit
Original Software, frequent WindowsUpdates
==================================================
Dump File : 100812-9250-01.dmp
Crash Time : 08.10.2012 12:12:13
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`0415a060
Parameter 3 : fffff800`00b9c3d8
Parameter 4 : fffffa80`082be9d0
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.17835 (win7sp1_gdr.120503-2030)
Processor : x64
Crash Address : ntoskrnl.exe+7f1c0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\100812-9250-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump Fi... Read more

A:Driver Power State Failure, Win7 x64, Lenovo Thinkpad X220

Hello,

Take a look at the following link and attach the requested reports to your next post.

http://www.techsupportforum.com/foru...ta-452654.html

Read other 5 answers
RELEVANCY SCORE 93.2

Hi

I need your help. Everytime I wake up my Lenovo U310 Touch from Sleep it freezes and then blue screen error : DRIVER_POWER_STATE_FAILURE. Could you please help me ?

I have attached my files from SF diagnostic tool.

Thank you.

A:Driver Power State Failure - Windows 8 Pro 64-bit

All of the memory dumps blame your Intel Rapid Storage Technology (RST) drivers. Please update the drivers from the Lenovo website. If a more updated version isn't available from Lenovo, then download/install the latest version from Intel here: http://downloadcenter.intel.com

If all of this doesn't stop the BSOD's, please run these free hardware diagnostics: Hardware Diagnostics. Let us know the results and we can move on from there.

Analysis:
The following is for informational purposes only.

Code:
**************************Thu Jul 18 18:36:30.272 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\Owner\SysnativeBSODApps\071913-15734-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 4:26:35.061
*** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
Probably caused by :iaStorA.sys
BugCheck 9F, {3, fffffa800368f590, fffff8016f4927f0, fffffa8004ddec60}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800368f590, Physical Device Object of the stack
Arg3: fffff8016f4927f0, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8004ddec60, The blocked IRP
BUGCHECK_S... Read more

Read other 7 answers
RELEVANCY SCORE 93.2

Hello,

when I start up my PC I always get a driver power state failure I've been ignoring it for a few days but I want to get rid of it now.

I have attached my files from SF diagnostic tool.

Thanks a lot

SF_31-07-2013.zip

A:Driver power state failure - Windows 8 64-bit

can anyone help?

Read other 12 answers
RELEVANCY SCORE 93.2

Yes, another one of these threads. I am sure you are flooded with them, but this has been irritating me for 3 months and would like it to get resolved if someone could help. I think I big issue is that my motherboard does not have any Windows 8 drivers (big mistake on my part upgrading), but there could also be other reasons.

A:Windows 8 Driver State Power Failure

The uploaded reports aren't complete. Please rerun the collection app and let it run for at least 15 minutes (or until it tells you that it's done). In particular I need the systeminfo.txt file and the MSINFO32.nfo file.

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions). I strongly suspect that this hold true for Win8 systems also.





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disc-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



There are some issues with your Microsoft Security Essentials installation - please scan your system with a couple of these free scanners to be sure the system isn't infected: Free Online AntiMalware Resources

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make ... Read more

Read other 3 answers
RELEVANCY SCORE 93.2

Ok so when shutting down my computer it seems to hang at shutting down for ages (time changes) and then I get a BSOD and it says DRIVER POWER STATE FAILURE. It also does this randomly when not shutting down.

I have a Dell XPS, Core i7 (8x 2.67ghz), 8Gigs of RAm, running a legal copy of Windows 7 Home Edition (64bit).

Its fully updated and have previously done a reinstall.

Cant really think what else to do. Oh and when listen to music (most noticable) the sound cuts out and makes horible noises for a half second then plays fine and then does it again later. It seems to only do this after the computer has been on a while though.

I have attached minidumps bellow.

Anything would be helpfull.


Minidump.rar - Windows Live

A:DRIVER POWER STATE FAILURE Windows 7

Hi Soulpurser. Sorry you are having problems. Please read this thread and post back. We will be glad to help you.
http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 93.2

Hello,

I am getting periodic BSOD issues that MIGHT be occurring when the system is transferring from the Intel(r) HD 4000 GPU to the GTX 880M Nvida card. The Nvidia card is brand new. I've been trying to test it via GPU-Z and FurMark. I ran it for an hour and it never crashed, but was running very hot -92-93C. Not really sure how to even test the Intel(R) HD 4000 GPU. Nothing is overclocked or has ever been overclocked.

I re-installed windows 8.1 but the problem persists.
Attaching the SF Debug files in attached zip

A:Driver Power State Failure - Windows 8 Pro 64-bit

Code:
Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Mihael\Desktop\111514-28140-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17328.amd64fre.winblue_r3.140827-1500
Machine Name:
Kernel base = 0xfffff802`f081c000 PsLoadedModuleList = 0xfffff802`f0af2370
Debug session time: Sat Nov 15 22:50:29.143 2014 (UTC + 1:00)
System Uptime: 0 days 7:00:00.889
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
.................................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* ... Read more

Read other 5 answers
RELEVANCY SCORE 93.2

I'm running Windows 7 and whenever I close my laptop my computer crashes and restarts. My settings are set to go to sleep mode when the lid is closed. I ran Blue Screen View and have a Driver Power State Failure. I also ran the SF Diagnostic Tool and attached the results. Any help is appreciated!

A:Windows 7 Driver Power State Failure

Fill out your system specs. Click the link in my signature to do it.

Read other 8 answers
RELEVANCY SCORE 93.2

Hey ya'll im having a on-board networking problem. hoping anybody can help!

so, i went out of town Friday morning and got back yesterday. my computer was off all weekend. I have a linksys router and have 3 computers(including mine) connected to it through out my house. I turned my computer on for the first time last night and started up just fine, but no internet nor did the other computer in my house. i rebooted the router and modem and got the other computers connected. by this point my computer still has no access to the internet. so i try a few little things aside from reinstalling the chipset drivers. no success. so as a last resort I reinstall the driver and proceeded to get it to work. again no success.

computer specs are:
Asus P5N-e SLI nforce 650li
C2D e4600 @2.6 -- OC'd to 3.21
4gigs OCZ ram OC'd
8800GT OC'd
Windows 7 RC1 7100 64bit(1st problem i had using this RC. OS)
750 psu
4 Western Digital hard drives(500 sata,160 sata,160 IDE,120 sata) no RAID
xf-i pci sound card

this is what happening now. after the reinstall it hangs on shutdown or rebooting the OS. my network controller appear and disappears in the Network Connections menu. re- and un- installed it in safe mode a few times. all and all no success.

here the Windbg report i have on the BOSD minidump i got.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.402 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\spook\Desktop\110309-23... Read more

A:Driver Power State Failure Windows 7 64-bit

We'll need the information that's in this post in order to get started: http://www.techsupportforum.com/1871981-post2.html

Read other 1 answers
RELEVANCY SCORE 93.2

I upgraded to 64-bit Windows 7 Home Premium about 2 days ago (from Vista Home Premium, SP2) and have experienced at least 3 BSoD's all from "driver power state failure." When Windows boots back up, I get the following description

Quote:




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8005E34A00
BCP3: FFFFF80000B9C4D8
BCP4: FFFFFA80049DB8B0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\121409-27768-01.dmp
C:\Users\Steve\AppData\Local\Temp\WER-96642-0.sysdata.xml




I have attached the .dmp file mentioned. The other doesn't seem to actually exist.

Avast, Ad-Aware and Spybot S&D all came up with nothing.

I'm not positive all of the information you need or where to get it. I have minimal technical computer troubleshooting experience. Please let me know how I can help you help me.

A:Windows 7 Driver Power State Failure

I found the troubleshooting guide by luck in another thread, so I think I now have all the right files you need. They should be attached to this post.

Read other 6 answers
RELEVANCY SCORE 93.2

Hi guys, my name is Filippo.
I am experiencing a severe problem with my laptop, a pretty new ASUS S550CB. It started two weeks ago and I really cannot figure out what is the cause. The problem is that the laptop is no longer unable to wake up from sleep or hybernation modes. If it goes to sleep, after it wakes up it is able to show the login screen (sometimes) but when you're typing the password it freezes and after a while, a blue screen saying that the computer stopped working due to a Driver Power State Failure is shown. A minidump is saved and the computer is restarted. The whole operation takes a looong time. I also notice that boot times are much longer even when waking up from power off state.
 
In the Event Log [System] I see a critical Kernel-Power Event:
 

 

BugcheckCode

159

 

 

BugcheckParameter1

0x3

 

 

BugcheckParameter2

0xffffe00000f96060

 

 

BugcheckParameter3

0xfffff80221bc9840

 

 

BugcheckParameter4

0xffffe00002586390

 

 

SleepInProgress

4

 

 

PowerButtonTimestamp

0

 

 

BootAppStatus

0
 
I have generated report of the problem, including all the mindumps, as explained here: http://www.sysnative.com/forums/bsod-crashes-kernel-debugging/6... Read more

A:Driver Power State Failure on Windows 8.1

Hi
 
Crash dumps shows possible involvement of "Intel" storage controller driver in the crashes.

BugCheck 9F, {3, ffffe00000ffe880, ffffd000205ed840, ffffe00007628c80}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
Probably caused by : iaStorA.sys
 
As a first step, please try installing the latest version from the below link.
 
https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/23496/eng/SetupRST.exe&lang=eng&Dwnldid=23496&ProductID=2101&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+Rapid+Storage+Technology+(Intel%C2%AE+RST)

Read other 6 answers
RELEVANCY SCORE 93.2

Hello,

I was just watching YouTube videos when I got a driver power state failure BSOD, my computer is set to never sleep (because I sometimes render videos over night)

I have attached my files from SF diagnostic tool.

Thanks a lot

-Jack

A:Driver power state failure - Windows 8 Pro 64-bit

*bump*

Read other 3 answers
RELEVANCY SCORE 93.2

Info - I installed Windows 7 x64 just recently on this machine, and periodically it bsods and restarts.

2 years old.
New install of Windows 7

Operating System
MS Windows 7 64-bit
CPU
Intel Core 2 Quad Q6600 @ 2.40GHz 70 ?C
Kentsfield 65nm Technology
RAM
2.0GB Single-Channel DDR2 @ 399MHz (5-4-4-17)
Motherboard
ECS P55G (CPU 1)
Graphics
iH282 @ 1920x1200
NVIDIA GeForce 8600 GTS (Microsoft Corporation - WDDM v1.1) (EVGA)
Hard Drives
161GB ExcelStor Technology J8160S ATA Device (IDE) 38 ?C
Optical Drives
ELBY CLONEDRIVE SCSI CdRom Device
TSSTcorp CDDVDW SH-S202J ATA Device
TSSTcorp CDDVDW SH-S203N ATA Device
Audio
High Definition Audio Device

EDIT: I have AVG Free installed, I'm unsure why it states I don't have Anti-Virus protection..




http://www.fileden.com/files/2009/6/9/2471471/Bsod%20Issue.zip

I uploaded the zip to fileden due to size restrictions...

Thank you for the help!

A:Windows 7 x64 Driver Power State Failure

Hi,

Obvious cause - nvm62x64.sys is mentioned in all the dumps.


Code:
nvm62x64.sys Sat Oct 18 10:01:06 2008 (48F8FD12)
And it is out of date.

It is the NVidia Networking driver - part of the nForce chipset driver package.

Update it from here: http://www.nvidia.com/Download/index.aspx?lang=en-us (you may have to find out what exact chipset your motherboard uses)

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Sun Aug 1 12:34:22.374 2010 (GMT+12)
System Uptime: 0 days 0:40:40.527
*** WARNING: Unable to verify timestamp for nvm62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for nvm62x64.sys
Probably caused by : nvm62x64.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`02432a20 fffff800`00b9c518 fffffa80`02522a10
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Sun Aug 1 11:50:06.828 2010 (GMT+12)
System Uptime: 0 days 0:40:40.591
*** WARNING: Unable to verify timestamp for nvm62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for nvm62x64.sys
Probably caused by : nvm62x64.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 0000009F
Arguments 00000000`00000003... Read more

Read other 3 answers
RELEVANCY SCORE 93.2

Hello,

When I start up my computer I am not always able to enter windows right after I turn on the power button unless I restart it. That is strange and also new. However there are times when I am in fact able to enter Windows briefly with out doing this.

On the occasions that I am able one of two things afflicts me. Either, my storage hard drive is not booted and does not even appear in my computer which usually requires a reboot or two to rectify - or, My pc takes exceptionally long to load the desktop or some other function of the gui and then shows me the bsod with the error Driver_Power_State_Failure.

But it gets worse I have second storage hard drive which very often has what one could call hard drive failure in that it randomly dismounts, is not recognised or gives error messages. I have reached my threshold of tolerance and would like to know if you good people at windows 8 forums who have saved me before when you were still windows 7 forums can do so again.

I have attached my dump files.

Thanks in advance.

A:Driver Power State Failure - Windows 8 x64

Your BIOS dates from 2008. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

systeminfo.txt report isn't present. Please be sure that you have ALL available Windows Updates (most systems have between 40 and 50)

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions). I strongly suspect that this hold true for Win8 systems also.





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disc-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO N... Read more

Read other 1 answers
RELEVANCY SCORE 92.4

Here is the BlueScreenViewer file:

View image: Screenshot 2016 03 20 04 59 26

My computer crashed while Win10 was automatically updating. Some strange behavior I noticed was that my sound card (UX2) stopped working when I plug it in (they have shitty drivers, they do this with all computers from time to time). When I restarted my PC, it automatically started updating Windows 10 (hate the updates). Then BSOD, power state failure. I cannot tell anything from the image, how can I tell if it was really my soundcard driver which was causing the issue?

much thanks!! it's a new PC, a few months old. built it myself, it looks beautiful

A:Windows 10 BSOD: Driver power state failure,

Hiya and welcome to SevenForums!

Please follow the Blue Screen of Death (BSOD) Posting Instructions

Read other 2 answers
RELEVANCY SCORE 92.4

Guys, I am using Windows 7 x32 (installed over pre-installed Vista x32) on my Lenovo x301 for almost a year. But I am experiencing a problem when I put my laptop in sleep/hibernate - very often it didn't properly wakes up and power on's like it was usual shut down, showing then to me that system was restored after unexpected shutdown (BSOD). I ve tried installing updates, updating drivers - still no luck.

? OS - Windows 7
? x86 32-bit
? Windows Vista
? Full Retail
? 9 months
? 9 months
? Intel Core 2 Duo CPU [email protected]
? Video Card: Mobile Intel(R) Series Express Chipset Family
? Motherboard: Lenovo 2774WK2
? Power Supply: ??

perfmon log in next post

A:Driver Power State Failure BSOD on Windows 7 x32

Quote:





Originally Posted by Cunick


Guys, I am using Windows 7 x32 (installed over pre-installed Vista x32) on my Lenovo x301 for almost a year. But I am experiencing a problem when I put my laptop in sleep/hibernate - very often it didn't properly wakes up and power on's like it was usual shut down, showing then to me that system was restored after unexpected shutdown (BSOD). I ve tried installing updates, updating drivers - still no luck.

? OS - Windows 7
? x86 32-bit
? Windows Vista
? Full Retail
? 9 months
? 9 months
? Intel Core 2 Duo CPU [email protected]
? Video Card: Mobile Intel(R) Series Express Chipset Family
? Motherboard: Lenovo 2774WK2
? Power Supply: ??

perfmon log in next post




Perfmon attach below

Read other 2 answers
RELEVANCY SCORE 92.4

Attached is debuglog.txt

Thanks in Advance

A:Windows 7 BSOD - DRIVER POWER STATE FAILURE

The debuglog.txt file is cut off at the top.
Please provide us with more information about when this error occurs.
Also, please provide us with the info outlined in this post: http://www.techsupportforum.com/1871981-post2.html

I'd start with running a hard drive diagnostic: http://usasma.vox.com/library/post/b...agnostics.html and running Startup Repair: http://www.bleepingcomputer.com/tuto...torial148.html

Read other 6 answers
RELEVANCY SCORE 92.4

Have been getting driver power state failure BSOD in windows 7 pro. Any help is appreciated. Here are the files...

? OS - Windows 7 pro
? x64
? original os - XP (Currently being dual booted with Win 7 Pro)
? Win 7 bought retail not OEM version
? Laptop- 2 years
? OS been 2 weeks since reformat
? AMD Athlonx2 64

A:Windows 7 BSOD Driver Power State Failure

Problem device:

Quote:




Not Available ACPI\ENE0100\4&23FC94D0&0 The drivers for this device are not installed.




This is the ENE CIR (Infrared Reciever) and it doesn't have any drivers installed. Please install the proper drivers for it from your System/mobo manufacturer's support website.

Also, please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:

Quote:




How To Find Drivers:
- I have listed links to most of the drivers in the code box below. Please use the links there to see what info I've found about those drivers.
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.




- - The most common drivers are listed on this page: http://www.carrona.org/dvrref.html
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown... Read more

Read other 10 answers
RELEVANCY SCORE 92.4

Yeah so this happened earlier today when i was shutting down the computer,it was taking ages to shut down then the error 'Driver power stat failure' came up along with BSOD

Any idea's?
Thanks

Sam
 

Read other answers
RELEVANCY SCORE 92.4

For weeks my computer takes approx 15 minutes to shut down. But instead of shutting down, it just restarts, and I get the message that windows had to shut down and the was a "Driver Power State Failure".

How can I fix this?

A:Windows 7 X64 BSOD - Driver Power State Failure

Hi,

The problem here is your Hard Drive controller - RTSTOR64.sys


Code:
RTSTOR64.SYS Tue Dec 02 19:01:40 2008 (4934CF44)
This was blamed for all your BSODs.

You should be able to find an update for it from Gateway -> http://support.gateway.com/support/d...p?cmpid=topnav


Code:
e1y60x64.sys Tue Aug 19 09:45:05 2008 (48A9ED61)
Your Networking drivers could also do with an update.

Use the Update Utility here: http://downloadcenter.intel.com/Default.aspx

Regards,
Reventon

BUGCHECK SUMMARY
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri Aug 6 16:44:06.015 2010 (GMT+12)
System Uptime: 0 days 0:30:26.515
BugCheck 1000009F, {4, 258, fffffa8006d54040, fffff800034bb4d0}
*** WARNING: Unable to verify timestamp for RTSTOR64.SYS
*** ERROR: Module load completed but symbols could not be loaded for RTSTOR64.SYS
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri Aug 6 16:12:22.357 2010 (GMT+12)
System Uptime: 0 days 2:24:56.840
BugCheck 1000009F, {4, 258, fffffa8006d19040, fffff80000b9c4d0}
*** WARNING: Unable to verify timestamp for RTSTOR64.SYS
*** ERROR: Module load complet... Read more

Read other 1 answers
RELEVANCY SCORE 92.4

Hello,

I have been getting BSOD's for a while now. I tried to ignore it but now it is getting annoying. I get one probably about once a week and everytime it happens it says "Driver Power State Failure." It just happens randomly.

I have an ASUS n90sv laptop running on Windows 7 ultimate. Here are some system specs.

- Windows 7 Ultimate
- x64
- The laptop is about 1 year old
- The OS installation is about 7 months old
- Intel Core 2 Duo T9550 2.66GHz
- NVIDIA GeForce GT 130M
- SiS 671DX + 968 Chipset
- Asus 90 watt power supply

I attached the TSF vista support folder and the system health report below.

Any help on this would be greatly appreciated.

Thanks.

Read other answers
RELEVANCY SCORE 92.4

Just had a random BSOD out of nowhere. Haven't had a BSOD on this system in over a year. Been running Windows 7 x64 on a Intel SSD since this time last year without any issues.

Windows action centre is telling me that " PX Engine" caused the crash and this has happened once before (I don't remember a BSOD though).

A bit of Googling shows that this is linked to Roxio software for DVD devices and that issues are common with this.. I don't have anything of the sort on my PC though.

ED: Looked in the info of the Windows Action Centre for the error and it seems that it did indeed cause a BSOD back on the 8th of August, I actually had a photo of the BSOD on the same date on my PC as well to confirm. So this has happened before.

OS - Windows 7 x64? As above
? Full retail version
? Age of system (hardware) - 3 years (oldest parts)
? Age of OS installation - 1 year
Hardware:
? INTEL CORE 2 DUO E8400
? NVIDIA 9800GT
? GIGABYTE EP35-DS3R
? ANTEC EARTHWATTS 500w
System Manufacturer - DIY

Full details attached. Also made a copy of the .DMP file if needed.

Cheers

A:BSOD - DRIVER POWER STATE FAILURE [WINDOWS 7 x64]

Hi -

Remove Daemon Tools/ Alcohol 120.

I am getting symbol errors on the NT Kernel. OS install date = 8 April 2010. I noticed you have -0- Windows Updates installed.

Install all outstanding Windows Updates, including Windows 7 SP1.

www.update.microsoft.com

Windows 7 Service Pack 1


Regards. . .

jcgriff2


`

BSOD SUMMARY

Code:

*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16384.amd64fre.win7_rtm.090710-1945
Debug session time: Sun Apr 24 06:50:04.193 2011 (GMT-4)
System Uptime: 0 days 6:41:08.315
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Probably caused by : ntoskrnl.exe ( nt+71f00 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`042d5680 fffff800`00b9c518 fffffa80`082adb80

[CPU Information]
~MHz = REG_DWORD 3000
Component Information = REG_BINARY 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Configuration Data = REG_FULL_RESOURCE_DESCRIPTOR ff,ff,ff,ff,ff,ff,ff,ff,0,0,0,0,0,0,0,0
Identifier = REG_SZ Intel64 Family 6 Model 23 Stepping 6
ProcessorNameString = REG_SZ Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
Update Signature = REG_BINARY 0,0,0,0,c,6,0,0
Update Status = REG_DWORD 6
VendorIdentifier = REG_SZ GenuineIntel
MSR8B = REG_QWORD 60c00000000

... Read more

Read other 4 answers
RELEVANCY SCORE 92.4

Hi guys! I'm new to these forums and I was hoping you guys could help me fix this problem with my computer that I've had with it ever since I got it. I bought a Gateway FX6801-03 Gaming computer last October and ever since I got it I've never had a successful shutdown with the computer. The computer would just hang on Windows is shutting down, if I let the computer sit on that screen it would then go to a BSOD saying Driver Power State Failure. Ever since I got this computer I've been getting USB issues as well. The only way I can plug a USB device into the computer is if I restart the computer first. It seems the computer doesn't want to accept any new USB devices after it's been on for a while. Anyways I'm not sure if any of this tie together but I'm afraid it might be a hardware problem, and Gateway is asking me to ship my entire computer to them all the way out in Texas. The computer is a 40 pound computer so I really don't want to ship this out to them unless I'm sure I can't fix it myself. I hope I did the memory dump correctly to help you guys find the BSOD problem. If you guys need me to do any other types of dumps, or answer any questions I'll be glad and quick to answer. Thanks guys.

A:Windows 7 64 BSOD - Driver Power State Failure

Hi,

The USB device problems sound like a hardware fault. Personally I would ship it back to Gateway now while the warranty is still valid.

Software problems that I can see:

1. Intel Drivers.

A few of your Intel Drivers (storage/networking) are out of date.

Run the update utility from here - http://downloadcenter.intel.com/Default.aspx

2. Your NVIDIA Graphics drivers could do with an update - http://www.nvidia.com/Download/index.aspx?lang=en-us

Regards,
Reventon

BUGCHECK SUMMARY
Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Jan 24 00:29:37.055 2010 (GMT+12)
System Uptime: 1 days 4:13:13.085
BugCheck 1000009F, {4, 258, fffffa800792c040, fffff80000b9c510}
*** WARNING: Unable to verify timestamp for RTSTOR64.SYS
*** ERROR: Module load completed but symbols could not be loaded for RTSTOR64.SYS
Probably caused by : RTSTOR64.SYS ( RTSTOR64+494d )
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Jan 10 18:22:15.501 2010 (GMT+12)
System Uptime: 1 days 10:59:39.642
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
BugCheck 9088, {fffff880090bf8c0, fffff880090bf8c4, fffff880090bf8d0, fffff880090bf8d4}
Probably caused by : iaStor.sys ( iaStor+4b41e )
BUGCHECK_STR: 0x9... Read more

Read other 10 answers
RELEVANCY SCORE 92.4

Hi guys, my name is Filippo.
I am experiencing a severe problem with my laptop, a pretty new ASUS S550CB. It started two weeks ago and I really cannot figure out what is the cause. The problem is that the laptop is no longer unable to wake up from sleep or hybernation modes. If it goes to sleep, after it wakes up it is able to show the login screen (sometimes) but when you're typing the password it freezes and after a while, a blue screen saying that the computer stopped working due to a Driver Power State Failure is shown. A minidump is saved and the computer is restarted. The whole operation takes a looong time. I also notice that boot times are much longer even when waking up from power off state.
From an initial investigation, the problem seemed to sit in iaStorA.sys (Intel Rapid Start Technology driver) not handing power modes correctly. So I tried to upgrade it to the latest version, and no luck. I tried to uninstall it, and uninstall also the ExpressCache software that the laptop came with, but no luck.
I then installed again first IRST latest driver, no luck. I then added ExpressCache on top of it (as stated in ExpressCache install instructions), no luck.

I do not have a recovery point saved before the problem started to happen (aroud 18 feb). I have tried to uninstall all windows updates received from 15 feb onwards but guess what? No luck as well.

I am terribly stuck and I hope someone can help me get out of this nightmare. The laptop all of a sudden b... Read more

A:Driver Power State Failure on Windows 8.1 - iaStorA.sys

Is there any particular reason that you have Secure Boot turned off?
Is there any particular reason that your Bluetooth is disabled?

Where did you get the Intel RST drivers from?
From the Asus website?
From the Intel website?
Which one's did you try?
Have you run a hard drive diagnostic to see if there's a problem with the hard drive? Here's those that I suggest: Hard Drive Diagnostic Procedure

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.





Processor may be overclocked!
Expected Frequency: 2000
Actual Frequency: 2494
Overclock Ratio: 1.247




Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ASMMAP64.sys Thu Jul 2 05:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY (also found in Asus systems)
http://www.carrona.org/drivers/driver.php?id=ASMMAP64.sys

atkwmiacpi64.sys Tue Sep 6 21:44:52 2011 (4E66CC94)
ATK WMIACPI Utility
http://www.carrona.org/drivers/driver.php?id=atkwmiacpi64.sys

AiCharger.sys Thu Sep 22 22:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/driver... Read more

Read other 24 answers
RELEVANCY SCORE 92.4

? OS - Windows 7
? x64
? What was original installed OS on system? Same
? Pre-installed
? Age of system (hardware) - don't know
? Age of OS installation - have you re-installed the OS? Never reinstalled

? 77 Q 720 @ 1.60Ghz
? ATI Mobilitiy Radeon HD 4650
? MotherBoard - don't know
? Power Supply - brand & wattage - don't know

? Dell Inc.
? Studio 1747 (laptop)

A:Driver Power State Failure BSOD Windows 7 x64

Just got the blue screen error again. I posted the minidump file with verifier on and posted all previous minidump files prior to turning on verifier.

Read other 8 answers
RELEVANCY SCORE 92.4

Hi,

few days ago, while Windows 8.1 was starting it was appeared a BSOD with error message - DRIVER_POWER_STATE_FAILURE - and then Windows was restarted.
In the Event Register I found - Event 41; Kernel-Power.

What must I do?

Thanks

A:Windows 8.1 - BSOD Driver Power State Failure

Mostly the BSOD will appear due to serious system malfunction…
System malfunction could be caused by some incompatible driver or preinstalled software…
Antivirus / antispware or security programs can also cause these issues.

Be sure to check in Windows Updates to see if a driver was updated prior to this occurring.
But also this problem could also be caused by a loose card or cable and even a weak power supply.

As you see, it’s difficult to say why the BSOD appears but from my point of few there is a easy way to troubleshoot the problem… recovery the notebook back to factory settings… if BSOD would appear using fresh recovered notebook, then hardware problem could be the reason for this malfunction.

Read other 5 answers
RELEVANCY SCORE 92.4

Hi, I am using Windows 8 64bit Lenovo Ultrabook I keep getting this Driver Power State Failure. It occurs when the computer is trying to wake up from sleep mode then it hangs for a while until the BSOD comes up with the failure. I'm not sure what driver might be causing this. I've uploaded a few minidump files into sky drive.Here's the link https://skydrive.live.com/redir?resi...DED179A9F5!452.

A:Windows 8 64bit driver power state failure

I only see a single kernel dump. I'm looking at it right now.

I noticed at first that some of your drivers aren't updated. Make sure that you go to the Lenovo website and download and install updates for all your drivers, including your BIOS. There may be a bug in one of them that's preventing power transition.

Read other 8 answers
RELEVANCY SCORE 92.4

Hello!

I've only recently purchased a computer that is just over a month old. Mostly during games I have had, at random, a BSOD. This also sometimes happens when I turn the computer on. It may sometimes go to a BSOD, restart, then I'll be up and running. I've attached the files necessary to analyse what the problem is. Some of the error files I've managed to discover (according to windows) include:

ntoskrnl.exe
hal.dll

My computer specs & details:

? OS - Windows 8, 64bit
? Original OS - Windows 8
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? I purchased my OS from the retailer and had them install it.
? Age of the system - 1 month
? Age of OS installation -1 month

? CPU - AMD FX-8350
? GPU - HIS Radeon HD 7870 2GB
? MOBO - asus m5a99fx PRO R2.0
? Power Supply - Thermaltake/750W



I would be tremendously happy with a solution to this problem!


Thanks.

A:Driver Power State Failure - Windows 8 (BSOD)

Hi,

We have two main bugchecks here:

A0000001

This is an AMD / ATI specific bugcheck and is usually always related to hardware and more specifically video card failure.

If we take a look at the call stack:


Code:

7: kd> kv
Child-SP RetAddr : Args to Child : Call Site
fffff880`02cdf638 fffff880`07278fee : 00000000`a0000001 00000000`00000005 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff880`02cdf640 00000000`a0000001 : 00000000`00000005 00000000`00000000 00000000`00000000 00000000`00000000 : atikmdag+0x25fee
fffff880`02cdf648 00000000`00000005 : 00000000`00000000 00000000`00000000 00000000`00000000 fffff880`07289631 : 0xa0000001
fffff880`02cdf650 00000000`00000000 : 00000000`00000000 00000000`00000000 fffff880`07289631 00000000`00000000 : 0x5
We can see an atikmdag.sys call and then it goes RIGHT into the bugcheck. That's how these specific bugchecks work. atikmdag.sys is one of the kernel-mode drivers within the suite. It monitors the functionality of other drivers within the suite among other things.

Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.

The other dumps we ... Read more

Read other 4 answers
RELEVANCY SCORE 92.4

Just have random BSOD's out of nowhere. Clean install, computer just came from the shop.
Any help would be appreciated.
Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64
- the original installed OS on the system? w7
- an OEM or full retail version? OEM
- What is the age of system (hardware)? new from the store,couple days
- What is the age of OS installation (have you re-installed the OS?) new

A:BSOD - DRIVER POWER STATE FAILURE (WINDOWS 7 x64)

  
Quote: Originally Posted by 4betlight


Just have random BSOD's out of nowhere. Clean install, computer just came from the shop.
Any help would be appreciated.
Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64
- the original installed OS on the system? w7
- an OEM or full retail version? OEM
- What is the age of system (hardware)? new from the store,couple days
- What is the age of OS installation (have you re-installed the OS?) new


Related to your Texas instruments driver tihub.sys I would remove it at least to test.

Read other 4 answers
RELEVANCY SCORE 92.4

I apologize in advance if this seems long-winded, but I'm trying to include as much detail as possible.

A couple of months ago I bought what I thought was a great deal for a new PC off Craigslist. Custom-built, $500, came with the following:

MSI x58 Pro Gamer Series Mobo
Intel i7-920
64gb SSD/ 1TB HDD
6GB Triple-Channel DDR3 1600mhz (forgot the brand)
Radeon x1650 Pro
1000W PSU (again, forgot the brand)

Everything worked great at first, except for some minor artifacting when playing games, but I expected that from such an old GPU. Ended up replacing the x1650 with an EVGA GTX 560 ti 1GB and shortly after that things went south.

First I realized that I hadn't wiped my old video drivers after installing the 560, so I ended up formatting c:/ and doing a fresh Win7 install via usb. Loaded everything fine, updated all drivers, and almost immediately started getting BSoD's shortly after Windows loaded. It seemed that if I didn't give the PC 5-10 minutes to "settle in" after booting up, the system would crash and BSoD, normally giving the reason "System Service Exception" or "Bad Pool Header". If it didn't crash immediately, it would normally run fine the rest of the time.

Aside from that, I noticed that my PC would randomly shutoff and reboot if I was playing a demanding game like Crysis, Just Cause 2, Battlefield 3, etc. with absolutely no warning. It never happened in less intensive games like LoL or TF2, but anything that could b... Read more

A:Can't access Windows - Driver Power State Failure

Are you using the SSD as your boot drive or the HDD? SSDs still happen to harbor a lot of issues and are more sensitive to manufacturing errors then HDDs, and this is especially the case if you didn't go around to update the firmware on them. Incompatibility caused by an outdated BIOS and/or chipset drivers (and drive controller drivers) can also be responsible for this.

I recommend you install Windows on your HDD, then if things are stable there, use that to update your SSD's firmware as well as your BIOS. Then return to your copy of Windows on your SSD and try updating chipset drivers and drive controller drivers. If none of this solves the issue, then it's time to start with a couple of hardware tests:

RAM: Memtest86+ - 7+ passes
CPU: Prime95 - Torture Test; Blend; overnight (9+ hours; you'll need to run this in Windows on your HDD Windows copy)
Drives: Seatools - All basic tests aside from the advanced ones. There's a bootup version as well.

It sounds a lot like a failing HD, a corrupt motherboard, or a bad PSU. Unfortunately, without actual hardware kits to test the PSU and mobo, you cannot test them. Drive tests like Seatools also are not 100% guaranteed to find problems since they do not perform write tests.

Read other 1 answers
RELEVANCY SCORE 92.4

Guys, I received 2 Driver Power State Failure *** STOP: 0x0000009F

It happened when I turned off my monitor to let the cpu download files, when I woke up it was BSODed. By the file size downloaded, it happened in less than a hour.

I'm using Windows 7 X64, my power profile is "High Performance", and I think this can be VirtualBox fault, because it begin to happen after its install.

Can you help me?

Thanks!

A:Windows 7 X64 BSOD - Driver Power State Failure

Hi -

Thank you for your preparation. I picked up the files and will go through them. In the meantime, I would ask that you take a look through these Microsoft KBs related to bugcheck 0x9f. My apologies on advance for providing you with a search-result link, but I was hoping that you may see a combination of symptoms that may be missed otherwise.

http://support.microsoft.com/search/...%3D1033&mode=r

Regards. . .

jcgriff2

.

Read other 6 answers
RELEVANCY SCORE 92.4

I recently in stalled windows 7 64 upgrade on my computer. Lately the computer won't shut down it just hangs for about 15 minutes then the BSOD with the error message. I ran malware and spy-bot programs to see if it was the problem but it wasn't. On HP website it said to go into msconfig and stop the programs from loading up, except the Microsoft programs. That didn't work. I searched the web and found a couple site but no luck. I really don't want to call Microsoft and sit on the phone forever to get help. So hopefully you can help me. I attached the two zip files to help in the process.

my system is
i7 2.66
12 GB ram DDR3
640 GB hdd
500 GB external hdd
Windows 7 Home 64bit

A:[SOLVED] Windows 7 Driver power state failure

You have STOP 0x9c errors - those were last used in XP, so there's an issue that's causing the system to react this way (Vista/7 should show STOP 0x124 errors for this type of thing).

Lot's of IW3MP.exe errors - that's a component of COD4. I'd suggest uninstalling the program. Then, if you still want it, reinstall the program and immediately update/patch it.

Issues with a Chicony driver in Oct (most likely a keyboard)
Issues with an Alcor Micro Corp. driver also (most likely a flash card reader)
Issues with an iPhone on 1 Nov.
Issues with an Ideazon device (a ZBoard?) on 6 Nov
I suspect some USB issues - are you using a USB hub? What USB devices do you have attached to your system? Is the USB hub powered (plugged into the wall)?

The BSOD's also point to the USB devices/drivers. Have you updated your drivers for the USB chipset? Have you updated the drivers listed below? I've seen problems with updating the Ideazon drivers - so you may have to uninstall them and use a PS2 mouse and keyboard until we rule out everything else.

I strongly suspect the USB sub-system on your computer - so unplug all of the USB devices and leave them unplugged until the problems have been solved.

I'd also suggest running Driver Verifier to help rule out some of the drivers. Try following this procedure to start with:

Quote:




Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll... Read more

Read other 4 answers
RELEVANCY SCORE 92.4

Hi:

Can someone help me determine what is causing my BSOD. I attached TSF compressed file for further analysis. Thanks.

Error: Stop: 0x0000009F

Read other answers
RELEVANCY SCORE 92.4

Hey.

Lately when ever i shutdowm my computer i eather get shutdowns taking as long as 30 mintues or a BSoD with a Driver power state Failure. Can anyone help? I have attached the Minidump as a .zip file. There are no other problems with system proformace.
I have also attachd msinfo32 NFO in the zip file with the dump...

Please some one help me out!!!

A:Driver power state Failure BSoD-Windows 7

HI,
I am attaching the folder TSF_Vista_Support,
as per instructions given by jcgriff2 in his profile...
PLease help me out as soon as possible...

Read other 19 answers
RELEVANCY SCORE 92.4

Hello all,

During seemingly random times my Lenovo Z-50-70 laptop BSODs and gives me a driver power state failure as the reason. Attached below are the files from DM Log collector tool. Can anyone help me?

Thank you

LENOVO-PC-Fri_10_07_2015_180651_54.zip

A:BSOD Driver Power State Failure - Windows 8.1

Either it's failing RAM or a failing Battery

See if you can place a warranty on your laptop

Read other 1 answers
RELEVANCY SCORE 92.4

Hello everyone,please excuse my english because is not my native language.
I recently bought an Acer V3-571G with I7-3632QM at 2.2GHZ,8GB RAM,Intel HD 4000,and Nvidia GeForce GT 730M with 4gb dedicated VRAM.Since i've installed Windows 7 Ultimate X64 i keep getting this BSOD "Driver Power State Failure" and i don't know what to do.I keep thinking that is a driver problem from NVIDIA,but Acer didn't released any other drivers and when i download the driver from Nvidia website for my graphics card i get an error that the hardware was not found and the installation stops,maybe i am wrong.
I've attached the event log and the dump files below:

DUMP FILE: Zippyshare.com - 032413-15865-01.zip
Even LOG: Zippyshare.com - errors.zip

Can anybody help me please because i am desperate.I can't get the laptop to service because my job requires me to travel alot and i don't have the possibility to leave it to service for 1-2-3 weeks so it can be fixed,maybe somebody can help me please?
Also,few details: i updated windows 7 x64 to SP1,i reinstalled twice the Nvidia and Intel graphics,i've changed the settings to power management in both many times (Intel and Nvidia),today i installed a new driver for the Intel HD from the Intel's website and still the same problem.
And i noticed that everytime before the laptop freezes and gives me that BSOD my 8th core is running at 100%,the other 7 are remaning normal at 5-15%,but that happends only when it's starting to freeze and give me t... Read more

A:Windows 7 BSOD Driver Power State Failure

Crashes indicated a problem with your display card drivers. For more help, please follow the blue screen posting instructions.http://www.techsupportforum.com/foru...ta-452654.html

-----

Read other 15 answers
RELEVANCY SCORE 91.2

Hello,
I've spent days researching online - I've tried to find if I had any drivers to update by going to my Device Manager but all "update driver" results I get are the same: they are up to date.
My minidump file: https://drive.google.com/file/d/0Bz9...it?usp=sharing .

DRIVER_POWER_STATE_FAILURE
Bug check code: 0x0000009f
Parameter 1: 00000000'00000003
Parameter 2: fffffa80`07d0ba10
Caused by Driver: ntoskrnl.exe
Caused by address: ntoskrnl.exe+75bc0
File description: NT Kernel & System
Crash address: ntoskrnl.exe+75bc0

Windows 7 Professional x64 Service Pack 1
Lenozo Ideapad z500
8gb ram, NVIDIA GEFORCE 2gb
Intel Core i7

Any help is greatly appreciated!

A:Windows 7 Pro: Driver Power State Failure ntoskrnl.exe 0x9F

from the research Ive done previously etc; I do believe the ntoskrnl.exe possibly leads to ram issue. I would test the ram by running memtest86+ from the following link: its best to let it run overnight if possible and to run it several times to make certain it shows accurate results as sometimes errors wont show up right away. Here is the link to that:

Memtest86+ - Advanced Memory Diagnostic Tool

If you get any errors from the test; then its likely you have one or more bad ram sticks

Read other 9 answers
RELEVANCY SCORE 91.2

Hi,

Recently when i shutdown my computer, it takes about 20 min and i then experience a BSOD stating Driver Power State Failure. I have come to be able to count on experiencing this. My system runs smoothly and only seems to have issues doing a clean shutdown. In addition, when the machine goes into standby, it will restart and experience the same issue and notify me that it experienced an unexpected shutdown.

? OS -Windows 7
? x64
? 2-3 months old laptop (pavilion dv6)
? 2-3 months os
? Intel i7
? Nvidia Geforce 230m (i think)
? MotherBoard (not sure)

I believe all my drivers are up to date and windows as well.

Any advice will be much appreciated.

Thanks,

Tommy

A:[SOLVED] Windows 7 BSOD Driver Power State Failure

The rest of the zip file

Read other 8 answers
RELEVANCY SCORE 91.2

i need a updated windows 10 driver for my aspire 7741z that keeps showing """ driver power state failure""". it has generic PNP monitor driver as the cause. The driver current version is AUO B173RW01 V3 any help would get me back onto my laptop. Help please.

A:aspire 7741z driver power state failure windows 1...

Can you get to Windows?

Read other 2 answers
RELEVANCY SCORE 91.2

Hi
I received UNEXPECTED_KERNEL_MODE_TRAP BSOD, 9 times in 2 month but when I update windows(8.1), it change to DRIVER_POWER_STATE_FAILURE BSOD (3 times in a week)
Specially it happen when i use firefox browser and open a lots of tabs and memory usage goes to 1.5 Gb
I'm using Lenovo Z510 laptop with latest drivers

Any help would be appreciated

Attachment 45755

A:DRIVER POWER STATE FAILURE BSOD after update windows(8.1)

HotSpotShield is known to cause BSOD's in some Windows systems, please uninstall it.

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disk-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



The dumps are suggestive of both your ESET program and the SoftEther VPN.
Uninstall both to test if that's the cause.
If it is, then install the latest, Win8.1 compatible version of one of them and test
Then install the latest, Win8.1 compatible version of the other and test again.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

Afc.sys Wed Jul 12 01:48:20 2006 (44B48D24)
Arcsoft(R) ASPI Shell (CD/DVD program)
http://www.carrona.org/drivers/driver.php?id=Afc.sys
... Read more

Read other 1 answers
RELEVANCY SCORE 91.2

Good evening, I'm sorry if I write in this section, but I do not know if it's the right one.

I have windows 8 professional original.

For about 2 weeks every time I turn on my pc crashes returning the error DRIVER POWER STATE FAILURE.

After that reboot and working properly.
*
Asked to send the following files:
c: \ windows \ minidump \ 043013-43539-01.dmp
c: \ users \ myusername \ appdata \ local \ temp \ wer-117078-0.sysdata.xml
c \ windows \ memory.dmp

Enclose the first file. The second I could not find it and the third is too large to upload.

Could you help me?

A:DRIVER POWER STATE FAILURE ON ORIGINAL WINDOWS 8 PROFESSIONAL

Welcome to TSF!

The dump analyses point to atapi.sys as the cause, it looks like a drive is slow to respond/wake up.

2 of the Windows up times are quite short, around 2 hours or so; had Windows already gone into hibernation/sleep and you woke it only to see it crash?

If you can carefully follow the instructions in the BSOD Sticky, we can collect further data to check what's happening: http://www.techsupportforum.com/foru...ta-452654.html


Code:

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800415d2d0, Physical Device Object of the stack
Arg3: fffff8017515b760, Functional Device Object of the stack
Arg4: fffffa800675cca0, The blocked IRP

Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: fffffa800675cca0

DEVICE_OBJECT: fffffa800415d2d0

DRIVER_OBJECT: fffffa800499aad0

IMAGE_NAME: atapi.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 5010abc9

MODULE_NAME:... Read more

Read other 6 answers
RELEVANCY SCORE 91.2

just enquiring about a bsod of death prob on my hp DV7-3006tx entertainment PC. I hope you guys can give me some input on how i can fix my Blue Screen Problem. Any help would be much appreciated . You will find the minidump files attached thanks.

Attachment 60521

Thx in advance MiKe

A:Windows 7 BSOD Driver POwer State Failure upon shutdown

There's a couple of issues here that make this problematic to troubleshoot:

First is that there is an issue with the date/time stamps on your system files - so the Windows Debugging Tools aren't able to access symbols for your operating system files (in particular NTOSKRNL.EXE / NTKRNLMP.EXE / NTKRNLPA.EXE / NTKRPAMP.EXE) from the Microsoft Symbol Server - so that makes debugging them difficult if not impossible.

Please do the following:
- activate/validate the Windows installation at Genuine Microsoft Software
- run sfc.exe /scannow to replace any problem files
- If that doesn't fix it, then wipe the hard drive and reinstall Windows
- don't use "leaked"/torrent builds

Next is that it's an HP system - so there's a lot of older drivers that will need replacing (HP loads more drivers than may be needed for your system - HP DV4 Drivers ). The theory behind this is that the older drivers are more likely to be a problem - so replacing them is more likely to solve issues (In short, it's a guess). If it's an HP system that came with Windows 7 installed I tend to worry less about these drivers (because of the testing that HP puts the systems through).

So, please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:




... Read more

Read other 1 answers
RELEVANCY SCORE 90.4

Okay it seems this problem is fairly common, but what isn't, is a simple solution that is easily understood, (for me, anyway). I get the blue screen, but my laptop shuts down too quickly for me to read all of what is going on and I don't know what to do.

What I do get is that Windows is shutting down to protect my system from damage. I also understand the evil "Driver_Power_State_Failure", which should come with its very own Mr Yuk Sticker.

The problem is sporadic, but happens often enough to be annoying. The reboot is so slow it has whiskers on it by the time I make it back to the desktop, and this seems to happen after my PC has been hibernating or sleeping, (but not immediately), which I take to be another commonality. I keep seeing that this may be a driver problem, but since it IS sporadic, I cannot pinpoint when it began, thereby trying to deduce WHICH program driver may be the culprit.

I use an G60 Series HP laptop with Windows Vista Home Premium, Service Pack 2.

Please help?

Thanks much,

Donna
 

A:Driver Power State Failure - Windows Vista Home Premium

Read other 15 answers
RELEVANCY SCORE 90.4

Hi Guys,

I own a Dell Vostro Laptop 1720 and I have been getting this Blue Screen randomly from whatever I may be doing. It says DRIVER STATE POWER FAILURE. My minidump is attached. Can someone help me to determine what could be causing the issue?

Thank you very much.
Nick

A:Blue Screen - DRIVER STATE POWER FAILURE Windows 7 Ultimate

Have been getting driver power state failure BSOD in windows 7 ultimate

? OS - Windows 7 ultimate
? x64
? original os from dell
? Laptop- less than 1 year old

Read other 3 answers