Over 1 million tech questions and answers.

BSOD while trying to sign in from sleep mode

Q: BSOD while trying to sign in from sleep mode

Recently I have been getting unusual BSoDs while trying to sign in from sleep mode or shortly after sleep mode. The first time this happened, it told me that the hibernation driver malfunctioned causing the BSoD, this time I don't know what it is telling me. Apparently there were a few other BSoDs too when I was at school and family were trying to use the computer.

I have a gaming keyboard, and it has backlit sections. After the BSoD, I restarted and now my PC seems to be working fine, but the top and lefthand sections are unlit (F keys, ESC, etc.). They work properly, but I thought I should just mention this.

I had multiple issues with this computer (custom built) from the getgo, but I found out that the first hard drive I had was bad. After replacing it, I haven't had any troubles at all for about the past 4-5 months. These blue screens are the first signs of any troubles I may have, so being cautious I just wanted to see if they are something normal or if I should be concerned.

I have attached the ZIP file that was made while using DM log collector.

RELEVANCY SCORE 200
Preferred Solution: BSOD while trying to sign in from sleep mode

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD while trying to sign in from sleep mode

Hi WiredHF.

Your motherboard is a Gigabyte retail one.

Code:
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = Z97-HD3
But it is OEM license of Lenovo.

Code:
Product ID: 00426-OEM-8992662-00497
Only possible with hackers activation exploitation which makes your windows installation counterfeit. And a counterfeit windows installation is not any worthy for troubleshooting. It is subject to BSODs and other issues.

If the activation exploitation is done without your knowledge, ask the system builder to rectify it and give you genuine windows. If the exploitation is done by yourself, get genuine windows and expect a trouble free OS.

Read other 9 answers
RELEVANCY SCORE 56.4

Hi I only get the BSOD blue screen when waking from sleep mode only and its always the same message. Just bought this laptop a month ago. The message is Driver IRQL not less or equal athw8x.sys
So I already uninstalled my wireless driver which was out of date and updated it to latest manufacture version, but I still keep getting this same message when waking from sleep.

A:Bsod only from sleep mode please help!

Please provide this information so we can provide a complete analysis: Blue Screen of Death (BSOD) Posting Instructions

Replacing the wireless driver was a good first step - the reports are needed to help figure out what the next step should be.

Read other 32 answers
RELEVANCY SCORE 56.4

Hi

I have installed a clean copy of Windows 8 x64 Pro today and I have found that each time the PC goes into sleep mode it will cause a BSOD when awakened and thus restart the machine.

I have included a copy of the dump files ceated by the tool SF_Diagnostic_Tool in the hope that will help.

Thanks for any advice.

A:BSOD when the PC has been in sleep mode

Welcome
Lets try a bit of a test. Go into safe mode and see if the problem still happens.

Read other 10 answers
RELEVANCY SCORE 56.4

I'm receiving a BSOD whenever I use the sleep function on my laptop.

Attached is the SF file. Please help!

A:BSOD on sleep mode

Welcome to Seven Forums.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

Your BSOD was caused by Killer Wireless-N 1100 Series LAN device driver Driver Reference Table





Quote:
Sometimes drivers remain, not completely uninstalled. Follow this tutorial for complete removal of drivers of the particular program:How to Clean Left Over Driver Files with Driver Sweeper




Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
************... Read more

Read other 1 answers
RELEVANCY SCORE 56.4

I've been seeing this happen with great frequency lately, usually once or twice a week the computer will spontaneously BSOD usually while no one is using it. Often it seems to happens after the computer has been put into sleep mode. Usually this is around bedtime, we'll put the computer to sleep and then sometime during the night will hear the computer rebooting. We had been assuming this was Microsoft somehow rebooting the system after security updates, but recently I caught the machine with the BSOD screen up. I looked in the minidump folder and saw that this has been happening for about the last 4 months. I don't quite have the expertise to analyze the dump files properly, so any help is greatly appreciated!

Windows 7 x64
original OEM-installed OS
both OS and hardware approx. 2 years old

A:BSOD while in sleep mode

Sorry I haven't DL'ed your attachment, but I'd suspect first a hardware device that is waking your computer. Try unplugging the network cable at bedtime and see if the problem goes away (if not your Network Adapter might be getting a wakeup signal from somewhere). Otherwise look at the Power Mgmt tabs of your connected hardware in Device Manager.

Another thing to look at is if you have any Task Scheduler tasks set to "Wake the computer" under Conditions. Look at each one that you see when you click on Task Scheduler Library i.e. the User tasks that your software might have made there.

The only Windows task that would wake yr PC afaik is an obscure one called SideShow and it's Disabled by default.

Read other 9 answers
RELEVANCY SCORE 56.4

My computer is 3 years old and I've never had a BSOD. But I've had 3 or 4 in the past week, always while the computer is in sleep mode or otherwise unattended at time of crash.

DM Log Collector files are attached.
Additional information from the event logger is:

two instances with identical text:
BCCode: d1
BCP1: 000000000011C60E
BCP2: 0000000000000002
BCP3: 0000000000000008
BCP4: 000000000011C60E

single instance:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88001EF2EA3
BCP3: FFFFF8800DE3B668
BCP4: FFFFF8800DE3AEC0

A:BSOD while in sleep mode

Welcome to the forum Uplands666,

It seems that the BSOD's were caused due to Kaspersky.

This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
Arg4: 0000000000000000, address which referenced memory

Debugging Details:
------------------
Kaspersky Lab Intermediate Network Driver

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 56.4

All,

I need some help here please.

My PC is the network for all the IT equipment in the house, so always on. (there are 3 physical HDD's installed) C: is windows and all system & software D: is all user created files G: iS a copy of D:

I have screen going off after 15 mins and HDD power down after 1 hour.
Most days when use the PC and click on it after sleep mode I get the BSOD.

I have done the following already

1. Run memtest - NO errors
2. Run cmd SCANNOW
3. Have updated all drivers using Uniblue drive scanner 2013 and Drivermax

I can send copies of the error logs if that helps. From analysing blue screen errors, the main errors are reported as :-

a. ntoskrnl.exe
b. ntfs.sys
c. fltmge.sys

error types are:
a. page fault in non paged area
b. system service exception
c. ntfs file system

Your help would be greatly appreciated
thanks
Graeme.

A:BSOD after sleep mode

Before we begin please post back the following information:

Windows Updates and Activation

Cheers

Dave

Read other 4 answers
RELEVANCY SCORE 56.4

Hello,

I searched and found some other threads on this, but never saw a solution. When my Windows 7 Professional 64bit PC goes into sleep mode it will not come out. If I leave it long enough it appears to turn off. Upon restart it says it recovered from a BSOD. I have attached a picture of the mini dump for help deciphering whats wrong.

A:BSOD when PC goes into sleep mode

Take a look at this:

http://www.sevenforums.com/crashes-d...-hiberate.html

Read other 9 answers
RELEVANCY SCORE 56.4

Hi, my computer crashes every time I try to put it in sleep mode or if i leave it unattended for a while. Been happening for about a week. Assistance greatly appreciated!

7

Is Windows 7 . . .
- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? original installed
- an OEM or full retail version? oem
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? 8 months
- What is the age of OS installation (have you re-installed the OS?) 8 months, no re-install

A:BSOD Sleep Mode

The cause of the crash
stflt.sys
Is listed as a malware component.

Boot safe mode with networking
and install update and run a full scan with mbam
Malwarebytes : Malwarebytes Anti-Malware PRO removes malware including viruses, spyware, worms and trojans, plus it protects your computer

Read other 7 answers
RELEVANCY SCORE 56.4

Greetings, I am experiencing some issues with my new PC Build. (PC Information in my profile and in the zip file)

Motherboard - ASUS Z170-A
Processor - Intel Core i7-6700K 8M Skylake Quad-Core 4.0 GHz LGA 1151 91W BX80662I76700K

This may sound strange however, for the most part the PC runs fine, I can play games, I can stress test the heck out of it, everything I throw at this rig it chews it up.

The problem occurs when the pc goes into sleep mode. If the Pc goes into sleep mode and something wakes it up, the machine Blue Screens.

Troubleshooting Steps I've taken to try to resolve the issue.

Ordered a duplicate motherboard
Swapped the motherboard out
Updated the bios to the latest on both motherboards
Updated the firmware on all devices
Updated the Nvidia drivers for the video card
Disabled Fast boot in the bios
Disabled fast boot in windows
Disabled fast boot in bios and left fast boot enabled in windows
Disabled fast boot in windows and disabled it in the bios
Motherboard is not overclocked

As a last ditch effort I went through the manual and looked at the supported memory.

Current Memory = HyperX FURY 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 2133 (PC4 17000) Desktop Memory Model HX421C14FBK2/16

Ordered Memory to troubleshoot = Corsair Vengeance LPX 16GB DDR4 DRAM 3000MHz C15 Memory Kit for DDR4 Systems 2400 MT/s (CMK16GX4M2B3000C15B)

Hoping the Processor isn't the issue.

I am also considering returning the Asus motherboard and going with this one - Gigabyte L... Read more

Read other answers
RELEVANCY SCORE 56.4

Every few days getting BSOD when pc is unattended for a while. I have added mini-dump files

A:BSOD in sleep mode

Welcome to the forum.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

AODDriver2.sys Tue Feb 11 17:06:52 2014 (52FA044C)
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7[br][br]Part of AMD Fuel[br][br]Location: C:\Program Files\ATI Technologies\ATI.ACE\Fuel\amd64\AODDriver2.sys
Driver Reference Table - AODDriver2.sys

RTKVHD64.sys Tue Oct 18 17:48:20 2011 (4E9D6784)
Realtek High Definition Audio Function Driver
Driver Reference Table - RTKVHD64.sys

L1C62x64.sys Thu Jul 19 08:55:34 2012 (50077726)
Atheros NIC driver
Driver Reference Table - L1C62x64.sys

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows you to remove leftover registry:-Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems
To perform a clean install of a driver, follow this tutorial:How to Clean Left Over Driver Files with Driver Sweeper
Avast could cause BSOD's. Please remove them for testing purpose.

Recommended antivirus software for Windows 7 based on stability compared to others:- Microsoft Security Essentials Download | Free Spyware Protection
Malwarebytes - The Free version
Good ... Read more

Read other 1 answers
RELEVANCY SCORE 56.4

Good afternoon, I keep getting BSOD usually when the computer is in sleep mode, although it has happened when not in sleep mode usually after rebooting from a BSOD.

I think I've done the crash dump thing correctly please see attached file.

Any help on sorting this would be greatly appreciated.

A:BSOD when put in to sleep mode

McAfee is a frequent cause of BSOD's. Please remove it using its removal tool from here: Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

We recommended Microsoft Security Essentials from a strict BSOD perspective. Is most compatible & provides most stability compared to other antivirus app/Internet Security Software. Microsoft Security Essentials, Free antivirus for windows
Malwarebytes Anti-Malware Free
Good and Free system security combination


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.



Run a full scan with both (separately) once downloaded, installed and updated.

Let us know the results.

Read other 4 answers
RELEVANCY SCORE 56.4

In the last few days my computer has started consistently (~50%) blue screening after I've put it to sleep. Upon waking it up it informs me about how it wasn't able to shut down correctly, and once I get to the desktop, about the BSOD that occurred. I'd be grateful if you could assist me in finding out and eliminating the cause.

A:BSOD during sleep mode

  
Quote: Originally Posted by Mercer


In the last few days my computer has started consistently (~50%) blue screening after I've put it to sleep. Upon waking it up it informs me about how it wasn't able to shut down correctly, and once I get to the desktop, about the BSOD that occurred. I'd be grateful if you could assist me in finding out and eliminating the cause.


Hi
Simple issue as i see it.
MijXfilt.sys = MotioninJoy simulate Xbox 360 controller (virtual Xinput device).
Uninstalling would most likely fix your issue, sadly i see this BSOD often.
Do you actually use it?

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Skyler\AppData\Local\Temp\Rar$DIa0.646\080813-32682-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Machine Name:
Kernel base = 0xfffff800`02e5b000 PsLoadedModuleList = 0xfffff800`0309e670
Debug session time: Wed Aug 7 17:28:32.822 2013 (UTC - 5:00)
System Uptime: 0 days 5:37:53.024
Loading Kernel Symbols
...............................................................
............................ Read more

Read other 4 answers
RELEVANCY SCORE 56.4

I get a BSOD when waking from sleep mode. When this happens, I cannot do anything with my computer. It will not restart, I cannot shut down, power off. Nothing. None of my keyboard buttons work at all. So I stare at the BSOD for the hour or two that it takes my battery to die, so I can finally restart. Very frustrating. Thanks in advance.
Attachment 352485

A:Sleep Mode BSOD

Welcome.

Uninstall AVG as a test. It seems to be causing some problems.


Code:
fffff880`02ffa760 fffffa80`083f9000
fffff880`02ffa768 fffff880`06eff2eaUnable to load image \??\C:\Program Files (x86)\Rogers Online Protection\Rogers Online Protection\AVG\Identity Protection\agent\drivers\AVGIDSDriver.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AVGIDSDriver.sys
*** ERROR: Module load completed but symbols could not be loaded for AVGIDSDriver.sys
AVGIDSDriver+0xc2ea
Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability compared to other internet security software. Malwarebytes is a great combo to MSE. They are free and lightweight.

Also uninstall your existing Antivirus software before you install MSE.

Good and Free system security combination.



   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.




 Clean bootTroubleshoot Application Conflicts by Performing a Clean Startup
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:How to Change, Add, or Remove Startup Programs in Windows 7
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:Click on the
Type CMD on Search
Left click and Run as... Read more

Read other 2 answers
RELEVANCY SCORE 56.4

Hello I've having problems with BSOD after my computer goes to sleep mode. I haven't had a chance to check it out until now, so there are quite a bit of minidump files that have been accumulated.

My computer is about 6 years old. All I've done so far is update drivers for my graphic and sound card, but the BSOD still persists during sleep mode. I'm not too sure what I can do to fix these errors, so any help would be greatly appreciated. Thank you.

My system spec is:
Windows 7 Professional 32-bit Service Pack 1 Full Retail
Intel(R) Pentium(R) 4 CPU 3.00GHz
ASUSTeK Computer INC. P5LD2-VM
1 GB Ram
NVIDIA GeForce 8400 GS
Realtek High Definition Audio

A:BSOD during sleep mode

  
Quote: Originally Posted by gettabeamu


Hello I've having problems with BSOD after my computer goes to sleep mode. I haven't had a chance to check it out until now, so there are quite a bit of minidump files that have been accumulated.

My computer is about 6 years old. All I've done so far is update drivers for my graphic and sound card, but the BSOD still persists during sleep mode. I'm not too sure what I can do to fix these errors, so any help would be greatly appreciated. Thank you.

My system spec is:
Windows 7 Professional 32-bit Service Pack 1 Full Retail
Intel(R) Pentium(R) 4 CPU 3.00GHz
ASUSTeK Computer INC. P5LD2-VM
1 GB Ram
NVIDIA GeForce 8400 GS
Realtek High Definition Audio


Several problems that need addressing even before we can start to find the true cause

1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause. Yours is 2004

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

2-SPTD.SYS

This is another large cause used by daemon tools and alcohol120

Remove any CD visualization... Read more

Read other 5 answers
RELEVANCY SCORE 56.4

After doing a custom install of Windows 7 64 bit, from Vista 64 bit, my computer blue screens while in, or just after wake from hybernation. Install seemed to go fine but the next day it blue screened, 0x0...F4, later 0x0....7A. Messege; momentarily lost track of hard drive.
I have spent the last two weeks checking hardware, software, program compatability and running countless tests. Updated all drivers including NVidia's 195.62 WHQL. No luck so far. The only way to keep it running was to disable sleep mode. Had to replace the DVD burner to get it to work consistantly.
Memtest86, Prime95, dskchk ,system files, no errors. Attached are the dump files.

I'd like to resolve this issue before I tackle my other computers!
Thanks, kcburgie

A:BSOD in Sleep Mode

  
Quote: Originally Posted by kcburgie


After doing a custom install of Windows 7 64 bit, from Vista 64 bit, my computer blue screens while in, or just after wake from hybernation. Install seemed to go fine but the next day it blue screened, 0x0...F4, later 0x0....7A. Messege; momentarily lost track of hard drive.
I have spent the last two weeks checking hardware, software, program compatability and running countless tests. Updated all drivers including NVidia's 195.62 WHQL. No luck so far. The only way to keep it running was to disable sleep mode. Had to replace the DVD burner to get it to work consistantly.
Memtest86, Prime95, dskchk ,system files, no errors. Attached are the dump files.

I'd like to resolve this issue before I tackle my other computers!
Thanks, kcburgie


Hi KCB and welcome

Couple of questions?
Are you overclocking?

Do you use a raid?

Was the upgrade from vista to win 7 done as a upgrade, or clean install with format?

How long did you run memtestx86 for?
I am taking a look at the dmps, I get the feeling it is either a hardware problem, and or a memory problem

Thanks

Ken J+

Read other 9 answers
RELEVANCY SCORE 56.4

Hey everybody!

I just bought this laptop and had Windows 8 Pro installed in it. Everything worked fine. But after a few days when I put the laptop in the sleep mode and turn it back on, instead of waking up and restoring, the laptop restarts. On the log on screen I get an error "Your PC ran into a problem".

I re-installed the video drivers and everything I could but could not find a solution. The minidump file is attached.

Any help would be appreciated

A:BSOD after SLEEP mode.

Please provide this information so we can provide a complete analysis: Blue Screen of Death (BSOD) Posting Instructions

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disc-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ewusbmdm.sys Thu Sep 10 03:31:54 2009 (4AA8AB6A)
USB Modem/Serial Device Driver - "Huawei Mobile Connect" package
http://www.carrona.org/drivers/driver.php?id=ewusbmdm.sys

ewusbdev.sys Mon Oct 12 03:23:21 2009 (4AD2D969)
Huawei DataCard USB PN driver
http://www.carrona.org/drivers/driver.php?i... Read more

Read other 9 answers
RELEVANCY SCORE 56.4

To keep it short;

I receive a BSOD when I go into Sleep Mode sometimes. It's almost random, but it's not. ie. Like when I'm working on it for a long period of time. I've noticed an issue when I started using Daemon tools, it was almost instantaneously.

Windows 7
x86 (but in the Computer Props it says 64-bit OS)
406 of 586 GB used
6 GB RAM
System purchased in 2009 w/ OS installed

Anything further needed and I'll provide...Thank you GREATLY for any/all assistance.

A:BSOD Going INTO Sleep Mode

First, you gave away the answer - daemon tools.

sptd.sys

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done:

http://www.duplexsecure.com/en/downloads
Also...

Update audio driver (2009)

Update NVidia GeForce Drive (2009)

Update NVidia NForce Drive (2009)

Read other 9 answers
RELEVANCY SCORE 56.4

I've noticed that my computer shuts off after being in sleep mode for a while. When I reboot and look in EventViewer I find the message: "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly." Locale ID: 1033.

Here's my computer setup:
Operating System
Microsoft Windows 7 Professional 64-bit
CPU
AMD Phenom II X6 1100T
Thuban 45nm Technology
RAM
8.00 GB Dual-Channel DDR3 @ 715MHz (9-9-9-24)
Motherboard
ASUSTeK Computer INC. M4A79XTD EVO (AM3) 44 ?C
Graphics
Generic Non-PnP Monitor ([email protected])
1023MB GeForce GTX 460 SE (EVGA) 30 ?C
Hard Drives
932GB Seagate ST31000524AS ATA Device (SATA) 30 ?C

I've attached the zipped files from SF diagnostic tool: Attachment 251524

I will note that I recently did a clean install of Windows 7 and the problem remains. I'm really stumped on how to fix this one. Thank you.

A:BSOD after sleep mode

Welcome to SevenForums.

Apparently it looks like MotioninJoy simulate Xbox 360 controller (virtual Xinput device) driver from may is causing the blue screen.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff88001912638, 2, 8, fffff88001912638}

*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level... Read more

Read other 3 answers
RELEVANCY SCORE 56.4

Hello

This problem has been occurring since 2 weeks ago. Sometimes when I let the PC automatically go to sleep mode (since I'm afk), after coming back it restarts and this type of info appears:

Attachment 25360

Attached the .zip file with the info required. Also, hope the language barrier isn't a major problem.

A:BSOD after going into sleep mode

Uninstall your current antivirus as it is contributing to your BSOD's.

Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Windows Defender - Turn On or Off in Windows 8

Malwarebytes Free
Do not start the trial version of MalwareBytes


Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - Disk Check
3. Troubleshoot applications by a clean boot - How to perform a Clean Boot Windows 8
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

Look for updates for the drivers in red, if no available, uninstall their software.

PEGAGFN.sys Wed Aug 5 11:50:46 2009 (4A791DB6)
Pegatron/Toshiba HotKey or Password Utility
http://www.carrona.org/drivers/driver.php?id=PEGAGFN.sys

tosrfec.sys Tue Jul 12 17:05:25 2011 (4E1C2A75)
Toshiba Bluetooth USB Controller driver
http://www.carrona.org/drivers/driver.php?id=tosrfec.sys

hssdrv6.sys Fri Jun 21 07:07:11 2013 (51C3A73F)
Hotspot Shield Routing Driver [br] Possible BSOD cause seen in mid-2012
http://www.carrona.org/drivers/driver.php?id=hssdrv6.sys


Code:
Debug session time: Thu Jul 25 22:20:04.533 2013 (UTC + 6:00)
Loading Dump File [C:\Users\USER\SysnativeBSODApps\072513-37921-01.dmp]
Bui... Read more

Read other 1 answers
RELEVANCY SCORE 56.4

I have an ASUS G51 (Best Buy) running Windows 7 Pro 64bit. Whenever I put my laptop to sleep for the night, it bluescreens the next morning. It has been doing it the last three days and I am not sure why since I have not done anything differently.

I have attached the minidump files.

Thanks
 

A:BSOD when in sleep mode

Read other 6 answers
RELEVANCY SCORE 56.4

After bringing my laptop out of sleep mode I got the horrible BSOD with stop error 0x1000007e (0xc0000005, 0x9b945667, 0x88d67c28, 0x88d67924). I couldn't read the exact message because the screen didn't show up long enough. I've got a small dump file for reading if anyone wants it.

I had my iPod plugged in and this problem has happened before with anything plugged in via USB, but it sometimes happens without anything being plugged in.

I'm running Vista Home Prem w/2GB RAM.
 

Read other answers
RELEVANCY SCORE 56.4

Hello, I've had a problem for about a year now with BSODs in sleep mode only. I've recently updated all software drivers with Secunia and hardware drivers with Slim Drivers, which seems to have cut down on the frequency - now only once a week rather than every other day (but that could be coincidence too). It does not seem to matter what I have open when entering sleep, but usually it's just Thunderbird and Firefox. I hope someone can help! Many thanks if so. Here is a typical report: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. - System - Provider [ Name] Microsoft-Windows-Kernel-Power [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4} EventID 41 Version 2 Level 1 Task 63 Opcode 0 Keywords 0x8000000000000002 - TimeCreated [ SystemTime] 2013-08-01T23:38:34.125000000Z EventRecordID 142520 Correlation - Execution [ ProcessID] 4 [ ThreadID] 8 Channel System Computer FALCON - Security [ UserID] S-1-5-18 - EventData BugcheckCode 159 BugcheckParameter1 0x3 BugcheckParameter2 0x86468690 BugcheckParameter3 0x83344ae0 BugcheckParameter4 0x85f39488 SleepInProgress true PowerButtonTimestamp 130198731803583985 - System - Provider [ Name] Microsoft-Windows-Kernel-Power [ G... Read more

A:BSOD while in sleep mode

Welcome to the forum.

Please update these drivers.

COMMONFX.DLL Mon Apr 9 18:23:31 2007 (461A3043)
Creative Common FX Plug-in
Driver Reference Table - COMMONFX.DLL

CTAUDFX.DLL Mon Apr 9 18:23:41 2007 (461A304D)
Creative Audio Driver (WDM)
Driver Reference Table - CTAUDFX.DLL

CTSBLFX.DLL Mon Apr 9 18:23:53 2007 (461A3059)
Creative SB FX Plug-in
Driver Reference Table - CTSBLFX.DLL

vsmraid.sys Sat Jan 31 07:13:29 2009 (4983A5B9)
VIA RAID driver for X86-32
Driver Reference Table - vsmraid.sys

To perform a clean install of a driver, follow this tutorial:
How to Clean Left Over Driver Files with Driver Sweeper

Revo Uninstaller "Free". Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software. Link to download: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Run Disk Check on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log
Link to full tutorial: Disk Check

The SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 ... Read more

Read other 6 answers
RELEVANCY SCORE 56.4

Hi All
My first post here.
I have a Lenovo S410p idea pad. From the very first day it has been BSODing whenever it comes out of sleep mode.
I have attached the log files from SF diagnostic tool.
Any help is very much appreciated.

A:BSOD after Sleep mode

The BSOD just says "Pool Caller Error"

Read other 7 answers
RELEVANCY SCORE 56.4

Dear all,

Please help me out. I have a new Lenovo Z50-70 laptop. The first thing I did after I bought it is put in a SSD and installed Windows 7 on it. This was originally a Windows 8 machine running a 5400RPM standard hard drive...

After everything was done I started getting BSOD's every time after the computer wakes up from Sleep mode. This has been exceedingly frustrating.

The SSD is one I took out from another computer of mine. The drive worked perfect on the other computer so I'm pretty certain it's not the problem. I wiped it clean with the Seagate Seatools HD management program first.

From my Googling research I have also run "verifier" and made sure it's not a particular driver crashing my computer.

I followed instructions on how to post BSOD threads and have attached the zip file that the "dm log collector" generated.

Any help is much appreciated. Thank you and have a good day.

Computer type Laptop
Computer Manufacturer/Model Number Lenovo Z50-70
OSWindows 7 Professional x64
CPUi7-4510U
Memory8.0GB PC3-12800 DDR3L SDRAM 1600 MHz
Graphics Card(s)Intel? HD Graphics 4400
Hard DrivesSeagate 600 SSD 240 GB SATA 6 Gb/s 2.5-Inch Solid State Drive ST240HM000
AntivirusMicrosoft Security Essentials
BrowserFirefox

A:BSOD after Sleep mode.

Hello D10 and welcome to the sevens forum, please follow these instruction and someone from the BSOD will help you.

Blue Screen of Death (BSOD) Posting Instructions

Read other 2 answers
RELEVANCY SCORE 56.4

After laptop goes into sleep mode it shuts down and on restarting I get BSOD message. Requested info is attached.

A:BSOD in sleep mode

Hi patdoak.

The BSODs are caused by PdaNet USB wireless tether.

Code:
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 89732028 00000000 00000000-00000000 pending
\Driver\pneteth
Args: 00014400 00000001 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-8a9a40f8

Args: 00000000 00000000 00000000 00000000
And the driver is old.

Code:
9b1ed000 9b1f0480 pneteth T (no symbols)
Loaded symbol image file: pneteth.sys
Image path: \SystemRoot\system32\DRIVERS\pneteth.sys
Image name: pneteth.sys
Timestamp: Fri Nov 25 10:56:02 2011 (4ECF26EA)
CheckSum: 00010F6E
ImageSize: 00003480
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try to update it from June Fabrics PDA Technology Group

Let us know the results.

Read other 5 answers
RELEVANCY SCORE 56.4

Hello i have Windows 7 x64bit and the problem started a few months ago.
I have default options for energy options and this worked for months but now sometimes when the PC would go into sleep mode it would not wake up.
Everything is either black and i have to restart it manually or the pc itself has restarted!
I have Eset 4.0 Smartsecurity installed, my PC Specs are in my Profile.
I returned to a previous image with acronis that i know of has worked for months but this did not fix the problem, it still happens from time to time.
I attach the dump files.
Thanks for help, this is driving me nutz

A:sometimes BSOD when PC goes into Sleep Mode

  
Quote: Originally Posted by cruserx


Hello i have Windows 7 x64bit and the problem started a few months ago.
I have default options for energy options and this worked for months but now sometimes when the PC would go into sleep mode it would not wake up.
Everything is either black and i have to restart it manually or the pc itself has restarted!
I have Eset 4.0 Smartsecurity installed, my PC Specs are in my Profile.
I returned to a previous image with acronis that i know of has worked for months but this did not fix the problem, it still happens from time to time.
I attach the dump files.
Thanks for help, this is driving me nutz



These were all caused by your atheros lan driver. I would download and reinstall its driver.

Let us know if you need help

Ken


Code:
[IMG]file:///C:/Users/K/AppData/Local/Temp/moz-screenshot-11.png[/IMG]
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\New folder (3)\041910-62774-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c4c0?
Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machi... Read more

Read other 4 answers
RELEVANCY SCORE 56.4

Sometime i have random BSOD after sleep mode ''IRQL_NOT_LESS_OR_EQUAL''.
I know it is not caused by faulty hardware as the pc has passed several tests. I would like to know if my windows has a bad configuration or if a driver is causing it. (I would like to know how to post the dmp file also).

A:BSOD after sleep mode

I forgot to say that they are very rare (1 each month aprox.).

Read other 2 answers
RELEVANCY SCORE 56.4

Hello Everyone,   I get this alot but cannot get rid of it,  I tried deleting Temps in safe mode then running
 
sfc /scannow using the Run As Administrator on Command Prompt,  but still no good.
 
Anyone know how to stop the BSOD after sleep?  Thanks
 
PS. using Windows 7 Home Premium.

A:Sometimes BSOD after Sleep Mode?

Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane.
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
 

Please download MiniToolBox, save it to your desktop and run it.
 
Checkmark the following checkboxes:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.
 

Read other 4 answers
RELEVANCY SCORE 56.4

Hi. Hope you can help. Have a new PC purchased without OS installed (spec is in my profile). I have installed Windows 7 Pro and official drivers supplied with PC for M/B, Graphics card, Avermedia TV Card etc. All works fine except when system placed in sleep mode. Invariably get BSOD on wake-up. Have attached file generated by DM Log Collector.

Have checked System Log and see these three entries which may be relevant to latest BSOD which is tied to dump file 010715-17050-01.dmp:

Critical Event at 20:41:35 on 07/01/2014: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Error event at 20:41:45 on 07/01/2014: The previous system shutdown at 19:58:43 on ‎07/‎01/‎2015 was unexpected.

Error event at 19:29:55 on 07/01/2014: The following boot-start or system-start driver(s) failed to load:
UsbCharger

Many thanks

A:BSOD on new PC when in Sleep Mode

You cannot blame this computer, with 29 startup items.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Now follow Power Plan Settings - Change ... go to step 5.B and dont let your SSD to go to sleep.

Let us know how it runs.

Read other 5 answers
RELEVANCY SCORE 56.4

Hi Guys,

I've been searching the web for answers for a while now and I cant seem to make sense of whats happening with my computer. Randomly, when i wake it up from sleep mode, i get the login screen and then the dreaded BSOD

I bought it from a store a mths a go with windows 7 installed. I've barely installed or added anything else to it in that time.

Thanks for your help in advance guys

A:BSOD after sleep mode

  
Quote: Originally Posted by MissBidgy


Hi Guys,

I've been searching the web for answers for a while now and I cant seem to make sense of whats happening with my computer. Randomly, when i wake it up from sleep mode, i get the login screen and then the dreaded BSOD

I bought it from a store a mths a go with windows 7 installed. I've barely installed or added anything else to it in that time.

Thanks for your help in advance guys


Hi MissBidgy welcome to SF

Please follow these steps in this order,

Update your ZTE Incorporated USB Modem/Serial Device Driver.

Uninstall kaspersky from your system using kasremover

Download and install MSE

Enable windows firewall.

------------
Finish with the above step and post back with any results.

Read other 1 answers
RELEVANCY SCORE 56.4

Ive been having a blue screen of death after reawakening my computer from sleep mode. It does not always happen but it happened 3 times already.

I'm using windows 7 professional 64 bit full retail version

Here are the logs

A:BSOD after sleep mode

Is your SSD firmware up to date?
Have you tried power cycling the SSD to reset the hardware/software connection to the BIOS and clear corruption?

Try doing a power cycle of the SSD. The following steps should be carried out and take ~1 hour to complete.Power off the system.
Remove all power supplies (ac adapter then battery for laptop, ac adapter for desktop)
Hold down the power button for 30 seconds to close the circuit and drain all components of power.
Reconnect all power supplies (battery then ac adapter for laptop, ac adapter for desktop)
Turn on the system and enter the BIOS (see your manual for the steps to enter the BIOS)
Let the computer remain in the BIOS for 20 minutes.
Follow steps 1-3 and physically remove the SSD from the system by disconnecting the cables for a desktop or disconnecting the drive from the junction for a laptop.
Leave the drive disconnected for 30 seconds to let all power drain from it.
Replace the drive connection(s) and then do steps 4-8 again.
Repeat steps 1-4.
Start your computer normally and run Windows.

The above steps were a result of: Why did my SSD "disappear" from my system? - Crucial Community

While that may not be your drive, a power cycle should be the same on all SSD drives. See how the system responds after the SSD power cycle.

Read other 4 answers
RELEVANCY SCORE 56.4

I am experiencing BSOD during sleep mode. I have also attached the SF debug file below.

Read other answers
RELEVANCY SCORE 56.4

I have a peculiar problem with more than one computer. The issue is in regards to Dell Latitude E6440 laptops. Whenever you try and put them into sleep mode, they hang and ultimately crash. I pulled the dump files and viewed them myself but I am fairly new to analyzing dump files. I believe I have narrowed the issue down to the video card driver and made sure everything was up to date however the issue persists. I have played with multiple different settings and it crashes when going into sleep mode about 90% of the time. The issue does not seem to affect a new computer out of the box. I assume it is a piece of software that we installed after the fact but I uninstalled everything that we installed and the issue remains. The files I attached to the post is from a PC that still has AutoCAD software installed, however, but it still happens on laptops without AutoCAD

Specs:
OS: Windows 7 SP1 (tried both x64 and x32. x64 image was built off the laptop out of the box that came with Win7x64 pre-installed. x32 image was built off a previous E6430 image.)
CPU: Intel i5 CPU
GPU: AMD Radion HD 8690m & Intel HD Graphics 4600
Make and Model: Dell Latitude E6440


I appreciate any help with this as I am ripping my hair out trying to solve this. If anymore info is needed, please let me know.

A:BSOD when going into sleep mode

bump.

Read other 2 answers
RELEVANCY SCORE 56.4

Hello,

This computer was purchased second hand. I purchased windows 7 about 3 months ago. The previous version was not genuine.

- it is 32 bit
- previous OS is unknown
- OEM is purchased at full retail
- age of system is unknown
- OS was installed 3 months ago and the windows/old file has been removed.

your help is greatly appreciated.

A:BSOD after sleep mode

  
Quote: Originally Posted by mwestphal83


Hello,

This computer was purchased second hand. I purchased windows 7 about 3 months ago. The previous version was not genuine.

- it is 32 bit
- previous OS is unknown
- OEM is purchased at full retail
- age of system is unknown
- OS was installed 3 months ago and the windows/old file has been removed.

your help is greatly appreciated.



All of these were virtually identical and caused by hardware.
Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

Read other 3 answers
RELEVANCY SCORE 56.4

Hello,

I get BSOD every time computer resumes from sleep.

I think it's when I move the mouse or type something it crashes...

Thank you

A:BSOD after sleep mode

Welcome to 7F. I'll see if I can help you with your issues.

Please fill out your System Specs.



   Information
At 7F we rely heavily on knowing what hardware you have in your system, by filling out your system specs in the manner outlined below your specs will follow you round in every single post so we can see your hardware configuration at the click of a button without having to trawl through threads to find them.


Follow System Info - See Your System Specs to fill in your System Specs with as much info as possible. We're looking for something like the example below.


 YAMAHA STEINBERG USB DRIVER
Your Yamaha Steinberg USB driver is causing issues. It looks old and could do with updating, check for an updated version here.
Code:
fffff880`0bc3da48 fffff880`04282000Unable to load image \SystemRoot\system32\drivers\ysusb64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ysusb64.sys
*** ERROR: Module load completed but symbols could not be loaded for ysusb64.sys
ysusb64

3: kd> lmvm ysusb64
start end module name
fffff880`04282000 fffff880`0429f000 ysusb64 T (no symbols)
Loaded symbol image file: ysusb64.sys
Image path: \SystemRoot\system32\drivers\ysusb64.sys
Image name: ysusb64.sys
Timestamp: Thu Sep 27 03:38:24 2012 (5063BC20)
CheckSum: 00024FFE
ImageSize: 0001D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04... Read more

Read other 1 answers
RELEVANCY SCORE 56.4

Hey my pc will occasionally get a quick BSOD and shut off when I try to put it into sleep mode. It usually goes into sleep mode just fine but every now and then it crashes. Something I should tell you is that the circuit that supplies electricity is a little weird. I'll turn on my fan and my tv will wig out for a sec. Also when I turn on the fan with something plugged into the USB like a 360 controller it disconnects. I have to unplug and re plug it to get it to work. And every now and then when I successfully put my PC in sleep mode, I'll come back and find its off. When I turn it back on it says windows did not shut down correctly. Or my computer will come out of sleep mode by itself and just be at the desktop. Here's a pic of the BSOD from about a month back.
 

 
 
 
Here are my specs 
 
Windows 7 Home Premium 64 bitIntel Core i5-2500K CPU @ 3.30 GHz4 GB RAMEvga Geforce GTX 580

Read other answers
RELEVANCY SCORE 56.4

Just got a new Dell XPS Studio 7100 about 3 weeks ago. I get random BSOD during sleep mode at random times. BSOD never occurs while I am actively using the computer. This is very annoying and I am afraid I will lose my work at some point!

Enclosed zip file contains last 3 minidumps of the last 3 BSODs I've had in the past 24 hours.

Hope this helps. Running Windows 7 64+bit Home Premium Edition.

Already ran Windows Memory Diagnostics test, and it passed... three times.

Thank you SO much to anyone who can help solve this very annoying problem!!

A:BSOD during sleep mode

Welcome

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp1_jacobmiwdmps.zip\060911-23415-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`02c55000 PsLoadedModuleList = 0xfffff800`02e9a650
Debug session time: Thu Jun 9 01:59:36.552 2011 (GMT-4)
System Uptime: 1 days 23:44:08.723
Loading Kernel Symbols
...............................................................
................................................................
...................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck D1, {1c, 2, 1, fffff88004364... Read more

Read other 5 answers
RELEVANCY SCORE 56.4

My computer crashes when I go into sleep mode. This has been happening for about 3 weeks. Can anyone help me fix this issue? I can attach my dump files to this post for some reason, but I ran who crashed and it said the following:
On Mon 9/16/2013 3:14:59 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\091513-69092-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x5A440)
Bugcheck code: 0x9F (0x3, 0xFFFFFA8004EE65D0, 0xFFFFF80391447770, 0xFFFFFA800554FA40)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Mon 9/16/2013 3:14:59 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA8004EE65D0, 0xFFFFF80391447770, 0xFFFFFA800554FA40)
Error: DRIVER_POWER_STATE_FAILURE
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typica... Read more

A:BSOD when in sleep mode

Please provide this information so we can provide a complete analysis: Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 56.4

My computer is Blue screening when in sleep mode. No problems when I'm using it or idle. Also it doesn't crash immediately. I can put it to sleep and come back within 2 hours or so and it will come out of sleep normally. However, if I leave it overnight(6+ hours), I will need to push the power button to start it. Then when windows boots up I get a "Windows has recovered from an unexpected shutdown"

This has only started happening since I reformatted and reinstalled windows about 2 weeks ago. Sleep mode worked flawlessly on my previous installation.

Specs:
Win 7 Ult x64 Retail
Intel i7 920
Asus P6TD Deluxe
6gb Ram
Seagate 1TB 7200rpm

A:BSOD during sleep mode

Update your Marvell Yukon Gigabit driver, it was the cause of your crash
Marvell: Support

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80062ac060, fffff80000b9c518, fffffa80058a9e10}

*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for yk62x64.sys
Probably caused by : yk62x64.sys
DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80062ac060, Physical Device Object of the stack
Arg3: fffff80000b9c518, Functional Device Object of the stack
Arg4: fffffa80058a9e10, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: fffffa80058a9e10

DEVICE_OBJECT: fffffa8006c34050

DRIVER_OBJECT: fffffa8006c01060

IMAGE_NAME: yk62x64.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4ac07193

MODULE_NAME: yk62x64

FAULTING_MODULE: fffff88005141000 yk62x64

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT... Read more

Read other 2 answers
RELEVANCY SCORE 56.4

Hello. Every since few days ago, my computer has been BSODing when it goes into sleep mode every single time and I was hoping someone could help me figure out what's causing this problem. I've attached the minidumps for the last few days:
https://www.dropbox.com/s/04h1ctuis4q3ysy/minidumps.rar

This is on a Windows 64-bit.
 

Read other answers
RELEVANCY SCORE 56.4

My Win 7 professional x64 on a lenovo T500 sometimes restarts during sleep mode and gives me this message:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 1000009f
BCP1: 0000000000000004
BCP2: 0000000000000258
BCP3: FFFFFA800422B040
BCP4: FFFFF80000B9C4D0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
I bought the laptop this January and did a clean install with full retail version a few weeks later and I install and update ThinkVantage software from lenovo website.
I use a lenovo docking station in the office and bring only the laptop home. The BSODs happen when the laptop is home. Not sure if this would happen in the office because the laptop is always awake.
Thank you!!

A:BSOD in sleep mode

Hi Micro; welcome to the forum. Sorry you are having troble.

To begin your troubleshooting, I recommend that you uninstall Norton/Symantec. Norton is a known cause of BSOD's on some Win 7 systems. Use this removal tool: Tool. Download and install Microsoft Security Essentials in its place.

Next uninstall Alcohol. It uses a driver, found in your dump, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads. Select delete; do not select reinstall.

Here is an alternative virtualization program that does not user the sptd.sys driver:
Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview

Both dumps are error code 9F and point to memory corruption.




Quote:
9F, DRIVER_POWER_STATE_FAILURE. Caused by a device driver



Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c12000 PsLoadedModuleList = 0xfffff800`02e4fe50
Debug session time: Sat Oct 23 14:54:57.313 2010 (GMT-4)
System Uptime: 4 days 16:59:42.574
Loading Kernel Symbols
...............................................................
................................................................
................................................................
....
Loading User Symbols
Loading unloaded module list
..................................................
***********... Read more

Read other 3 answers
RELEVANCY SCORE 56.4

Please can anyone help with my BSOD that I get everytime i sleep the computer

Attached is the dump files

A:BSOD after sleep mode

Hi,

Your last 2 BSOD's indicates a problem with your :

Asus Charger Driver (AiCharger.sys is the problem driver)

It may need an update from here:

ASUSTeK Computer Inc. -Support- Drivers and Download P6T

There are a few updates for the ai charger listed under Utilities try the latest one Version 1.00.06


Hope this helps

Cheers
Dave

Read other 3 answers
RELEVANCY SCORE 56.4

Hi.

So I am getting frequent BSODs when going to sleep mode on my Windows 7 64 bit, which is very annoying. I have attached the minidumps I have available. It happens maybe once every five times. System specs are on my profile.

A:BSOD when going to sleep mode

We need more information to analyze your logs. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.

Read other 8 answers
RELEVANCY SCORE 56.4

Just wondering if anyone else has encountered such behavior and might know of a fix

If my pc goes to sleep and is not awakened for a couple of days or more, when I awaken it it comes up to a BSOD. If it sleeps for a couple of hours or so, it awakens ok. Any ideas?

I'm running vista x64 business version.

A:BSOD after Sleep mode.

What is the bugcheck on the BSOD screen?

Any driver name?

Looks like this:

0x00000000, (0x00000000, 0x00000000, 0x00000000, 0x00000000)
Probably caused by abc123.sys

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 55.6

Hello,

First, I must say this forum is a wonderful resource, thank you to the admins who make it happen.

As of today I have been getting a BSOD on 95% of my start-ups from sleep mode (close lid or press power button - as I setup)
I cannot figure this one out, please provide me with some insight.

As per forum standards I have included the information below along with the attachments.

Thank you in advance,
Is Windows 7 . . .- x86 (32-bit) or x64 ?
WINDOWS 7 HOME PREM OA 64Bit

- the original installed OS on the system?
YES, Re-installed on SSHD

- an OEM or full retail version?Purchased it from retailer- What is the age of system (hardware)
New, just purchased (MSI X460DX)

- What is the age of OS installation
New, 1 week.

A:BSOD - Boot From Sleep Mode

Any Ideas? I did a rollback to last week and the same BSOD occurs.

Read other 3 answers