Over 1 million tech questions and answers.

Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.

Q: Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.

hey, im having problems with plugging in my mouse to any USB port, this just started around an hour ago. ive checked on the brand's website which carried no complaints on problems like this with the same mouse. tried pretty much everything, even looking
it up on youtube and forums... Nothing has worked, worser still, i got it for christmas and its stopped working, ive looked though the device manager too. Please try and help me, if u can. I use Razer Naga Waith Red if that helps

thanks,
onyx

RELEVANCY SCORE 200
Preferred Solution: Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.

Hi onyx,
This error means a device driver notified the operating system that the device failed. This circumstance can occur if the device hardware fails or if the device driver fails.
Have you tried to update the device driver for test?
Please follow this guide trying t resolve this issue:
Code 43: Windows has stopped this device because it has reported problems
http://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspxKaren Hu
TechNet Community Support

Read other 2 answers
RELEVANCY SCORE 158

I was just working happily when my Microsoft Bluetooth Mouse just suddenly stopped working.
The Bluetooth settings page says "Bluetooth is turned off" and there are no options on the settings page or the system tray to turn Bluetooth on.
The Device Manager now has "Unknown USB device - device descriptor request failed" where it did not before.
Other devices all seem to be working fine - USB devices plugged in are being recognized and work properly. Only BT seems to be broken.
I've tried:
uninstalling the device and rebooting
installing the latest updated chipset drivers from the dell website
windows updates
pretty much all of the advice here: http ://troubleshooter.xyz/wiki/fix-usb-device-not-recognized-device-descriptor-request-failed

Any other ideas?
Thanks

A:XPS 15 9550 Bluetooth stopped working (Unknown USB device - device descriptor request failed)

So in desperation I just went into BIOS settings to see if there are any BT settings that may have become disabled. I didn't see any, and I didn't change any other settings.
After rebooting, BT and my mouse is now working again.
Something seems to be really flaky here, but hopefully this will help others with the same issue.

Read other 1 answers
RELEVANCY SCORE 147.2

I'm experiencing slim keyboard not being recognized in the Windows 8.1
The keyboard was working fine until just one day it just stopped working.
I tried factory reset literally 8 times along with most recent BIOS update and dell's recommended update software. + power setting --> disabling power saving on USB
It still come up as unrecognized each time even with fresh reinstall.
I was wondering if this is a hardware issue or just software bug from factory reset.
I don't think there is a available driver for this kind of problem is there?

Log Name:      Microsoft-Windows-Kernel-PnP/ConfigurationSource:        Microsoft-Windows-Kernel-PnPDate:          8/6/2016 1:09:35 PMEvent ID:      411Task Category: NoneLevel:         ErrorKeywords:      User:          SYSTEMComputer:      DellDescription:Device USB\VID_0000&PID_0002\5&1347b1a9&0&4 had a problem starting.
Driver Name: usb.infClass Guid: {36fc9e60-c465-11cf-8056-444553540000}Service: Lower Filters: Upper Filters: Problem: 0x2BStatus: 0x0
 

Read other answers
RELEVANCY SCORE 146.4

i have acer e1-571 notebook.running windows 10.from last few days my pc giving this error-Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.

A request for the USB device descriptor failed.                                                            
                                                                i have tried all kind of suggestions
given by microsoft related this problem .but   cant solved.card reader ,pen drive ,external keyboard ,or external mouse no one working.2.some  random  keys  is not working .please fix my issue .

Read other answers
RELEVANCY SCORE 146

I upgraded to Windows 10 a while back. Every time I open the computer I get a pop-up notification telling me the USB device is unrecognized. I have no USB devices in any of my 3 USB ports.
I sent my computer in twice. No help. They just uninstalled everything and reinstalled everything and told me it should be fixed. It is not. I then went about updating every driver in my Device Manager. I uninstalled the Unknown USB Device and then updated
other drivers. Certain drivers (such as PCI Express Root Port #3 - 9C14) when updating would also reinstall the Unknown USB Device, which I would then uninstall and keep working down the list. At the end of updating EVERYTHING I scanned for hardware changes
and "found" the Unknown USB Device. 
From what I can tell, and I know very little about this stuff, my computer can't name one of my USB ports. Since it can't figure out what it's called it can't download the proper driver for it. Since it can't download the proper driver it can't work properly.
The practical result from this is that one of my three USB ports does nothing when I put in any USB item (connect my android phone, thumb drive, presentation clicker, etc).
I've looked on tons of forums. My current thought is that if I can tell my computer what the deice is or download the right driver and tell my computer to use that driver for this device it should solve my issue. But I don't know how to know what the name
of the USB port should be (I imagine it woul... Read more

Read other answers
RELEVANCY SCORE 138

I plugged my android device to my PC by usb ..it is saying USB device not recognized. Please help me.

Read other answers
RELEVANCY SCORE 138

Hello, ok so after recently doing a clean install of windows 10(please don't get me started on that mess). my system has been plagued by random usb drops. it's where everything connected via USB suddenly disconnects then reconnects out of the blue. well I was using a Rosewill Transenclosure RX200R-APU-25B USB 3.0 dual 2.5 hard drive enclosure and transferring files from one drive to another (connected via USB) when one of these drops occurred. Now whenever I plug in my hard drive enclosure in a windows warning pops up and says "the USB drive that was just connected Malfunctioned and could not be installed" and in system manager it says "Unknown USB device (device descriptor request failed)". I know it's not the hard drives because I can remove them and use another connection and they work fine, all files intact. It's just now my hard drive enclosure won't recognize. This also happened to a "Loot crate exclusive Game of Thrones stark sigil 4GB USB stick I plugged in and turned into a windows 10 install drive. When I plugged it into use it after the windows media creator said it was done the USB stick was raw and unformatable. Please help. Microsoft keeps telling me it's a hardware issue even though it happened on two different systems. both operating windows 10 never any issue with windows 7 or 8.1

Dell N7110
i5-2450M about to upgraded to an i7-2820 if I can get this USB issue under contol
16GB Samsung DDR3 Ram
3-750GB HDD, 250GB HDD
EVGA GTX 1... Read more

A:Unkown USB device (device descriptor request failed) after disconnect

The driver could have been corrupted please re install the drivers for dell. Hope this helps

Read other 1 answers
RELEVANCY SCORE 137.6

I got back home after being away for 1 month and I boot up my PC and there are white lines running along the screen horizontally, and the screen is very squashed. So I went on to device manager and there is a little yellow triangle beside my GPU, I went on to properties and is says "Windows has stopped this device because it has reported problems. (Code 43)". I have tried uninstalling and reinstalling the drivers and updating them but it hasn't worked. Please help
 

A:Windows has stopped this device because it has reported problems. (Code 43) on GPU

Read other 16 answers
RELEVANCY SCORE 137.6

Well I have a MIDI keyboard instrument that was working on my Win7 x64 machine, with proper drivers, and then it just stopped. I get this error message "Windows has stopped this device because it has reported problems. (Code 43)". Oddly it works on an XP machine I tried, while it fails on other Win7 and Vista machines I've tried. Could this device have gotten damaged? If so, is there any way to have it detected in Win7, considering it works in XP still?

If anyone is wondering it's a Yamaha ez-250i keyboard instrument.

Also, I used a 12 foot usb cord. I remember reading something about USB only being designed for 6 feet or so, could this have damaged the device? Thanks.
 

A:Windows has stopped this device because it has reported problems. (Code 43)

Read other 6 answers
RELEVANCY SCORE 137.6

Hello,
I have ran into a problem. when i was talking on skype while talking i opened my browser and suddenly windows stopped and
a message appeared which was written your PC went into a problem windows will restart in 15 seconds, when restarted
my screen resolution became 800*600. Nvidia Control Panel in right click menu disappeared I Re Installed drivers and it did not help i also re installed windows also
did not help. when i click Nvidia Control Panel from Control Panel it gives an Error- "Nvidia Display Settings are not available","you are not currently using a display attached to an NVIDIA GPU. and in Device Manager There is another Error-"Windows has stopped this device because it has reported problems. (Code 43)"
I think Graphics card has been damaged or somewhere of the laptop has been damaged.
I have tried installing in safe mode, it said the drivers software installed successfully but when I
load windows in normal mode it has the same issue.
and i also tried the older version of the driver which came with
my computer, and when i installed it said driver software installed successfully and wants me to restart computer but
when i restarted the computer after coming up the windows logo it does not start and further it remains for some minutes and restarts again.
then says to launch the troubleshooter, i tried to fix that way but after attempting to fix the problem it said that
windows can not solve the issue.
I have attached to Images of t... Read more

A:Windows has stopped this device because it has reported problems. (Code 43)

your video card is defective..... try to use other video card to prove it...
 

Read other 1 answers
RELEVANCY SCORE 136.8

I have bought a new windows 8.1 Toshiba laptop when I connect my external hard drive witch was working ok before it's telling me - unknown usb device (device descriptor request failed) code 43

A:unknown usb device (device descriptor request failed)

did you try to go to power manager, shut off usb power saving

Read other 17 answers
RELEVANCY SCORE 136.8

My computer keeps telling me Unknown USB Device (Device Descriptor Request Failed), so I looked up how to fix it and they told me to uninstall it then scan for hardware changes and it will reappear working properly. Only it did not come back working properly, it came back the same. I am also 98% sure that this "unknown USB device" is my built-in webcam that has never once worked. So if someone wants to help me out and allow me to use my webcam that would be great!

A:Unknown USB Device (Device Descriptor Request Failed)

Hi there, can you first tell us what is the Name and Model number of your system?

What OS are you running

im sorry if you already listed this, as I cannot see your specs from the Windows Forum App..

I take it this is a laptop?

Read other 13 answers
RELEVANCY SCORE 136.8

I know that a similar question has been asked before but, not with the last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
My question is; has anyone heard of Windows 8.1 having driver WHQL problems?? Very.

Any/all ideas, appreciated.

ps, I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.

A:Unknown USB Device (Device Descriptor Request Failed)

Is there only one USB port on the right hand side? Sometimes manufacturers connect internal devices via an unused USB port internally. USB ports are usually in groups of two, seeing only one port is usually a sign that the wiring has been redirected internally to something else like a Bluetooth adapter or wifi adapter. It may even be a card reader or touchpad. Is anything like that not working? If it is start looking for a driver for it.

Read other 19 answers
RELEVANCY SCORE 136.8

I have had the Microsoft Wireless 2000 Keyboard and mouse for 10 months and it has been working fine. But recently when I plugged it in I got an error message which said :The last USB Device you connected to this computer malfunctioned. and Windows does
not recognize it.
I opened Devices and Printers and it said Unknown USB Device (Device Descriptor Request Failed).

Also it is on Windows 10 Home

Read other answers
RELEVANCY SCORE 136.8

Fresh install of Windows 10 and the last driver I need to sort out is the above.

I believe it is my powered USB 3 hub to which I plug in my keyboard and mouse. Technically it is working but I don't like seeing yellow triangles on devices.

So are there any fixes?

A:Unknown USB Device (device descriptor request failed)

If it's a generic USB 2.0 Powered Hub then technically there's should be no drivers needed by Windows, if it's a USB 3.0 Hub then I'm unsure (since I don't own any USB 3.0 Hubs).

Might be a Windows bug, basically Windows can't find the description information to display the Hub's name in the Device Manager example: Generic USB Hub, Root Hub Device, etc....

I'm pretty sure everything is working as should, you're good minus the minor annoyance if all device connected through the USB Hub is recognized by Windows; if you right click Properties on the yellow triangle it probably says "The Device is working properly".

Read other 6 answers
RELEVANCY SCORE 136.8

Im running windows 10 on an HP laptop, 64 bit, and i just got a micro usb to usb device so i can transfer stuff onto my phone. It worked when i first got it but now it comes up with a Device Descriptor Request Failed and a Code 43 error. Ive tried updating
the drivers, restarting my laptop, and plugging it into different usb ports but it still comes up with the error. Any suggestions? 

Read other answers
RELEVANCY SCORE 136.8

After installing Windows 10 anniversary update, I get the following error in the device manger: Unknown USB Device (Device Descriptor Request Failed)

Tried uninstalling and restarting PC. Reinstalled Windows made from media tool. Nothing fixed it. Did a google search and nothing has worked. No USB drivers on the PC maker's website.

Any ideas?

A:Unknown USB Device (Device Descriptor Request Failed)

You can try going into device manager > select show hidden devices and delete all "inactive" usb device appearances. In my example below, there would be four. Once done, reboot and try your device again:

Read other 6 answers
RELEVANCY SCORE 136.8

I HAVE TRIED THE WAY THAT HAS BIN SUGGESTION WITH NO LUCK
\_SB.PCI0.OHC1.RHUB.PRT2- BIOS DEVICE NAME
PROVIDER-MICROSOFT
IF YOU NEED MORE INF JUST ASK
PLEASE HELP

Read other answers
RELEVANCY SCORE 136.8

Hey
1.)So my mouse(Corsair Harpoon RGB) was recently just working fine until one night i unplugged it and put it into computer and on that computer it didnt work so i went back to my laptop to plug it in there, but it showed the same problem it didnt respond the logo didn't light up so i went to the device manager and it said *title. So how do i fix this is there something with my mouse is there something with my software?
Oh yea and on top of that i have 2 more issues that i jut can't solve by myself.

2.) Unknown USB-device(port reset failed)
3.)DVD Drive(optical drive) doesnt show up on the device manager but it sounds like it's working and it opens and closes.
4.)Front ports of my PC doesnt work if i plug an USB in it doesnt do anything (it does work perfectly in the back)

I don't know though if i should make more threads but they somewhat relate to each other,
that's why they are just in 1 thread. If you need to ask any question, need pictures , my specifications or anything else just ask me.
Thanks in advance!
Best regards Hao.
 

Read other answers
RELEVANCY SCORE 136.8

Turned on phone and said to plug into computer with USB and open Hisuite.  Is it an app that i can download and also how do i get the computer to recognize the phone?

Read other answers
RELEVANCY SCORE 136.8

Can any help with this problem? Have a Pavilion G6 with no USB 3.0 as I am aware. USB (3 ports) not working.However, when the plugged the mobile, the mobile does get charged. Device Manager shows "Unknown USB Device (Device Descriptor Request Failed)".   Running Windows 10 64 bit. Tried everything like uninstalling, updating etc as the information on the internet. Also, updated the drivers using Driver Easy but still getting the error. Any suggests, please? Thanks in advance. Sanil Sukumaran.

Read other answers
RELEVANCY SCORE 129.6

Let me start out by saying that I've googled the shit out of this problem, tried several things, and nothing worked.

I have a D-Link USB 2.0 Hub that I got about a week ago. It's been working awesome up until recently. It's a plug and play device, however windows is failing to recognize it, and thus making everything I have plugged into it unusable.

In the 'Device Status' box it says:

Code:
Windows has stopped this device because it has reported problems.
(Code 43)A request for the USB device descriptor failed.

And in the 'Events' tab, there's a few listed, I'm not sure if they are much help:


Code:
Device not migrated

Device USB\VID_0000&PID_0002\6&1330e4d7&0&3 could not be migrated.
Last Device Instance Id: USB\VID_0000&PID_0001\6&3AE11B61&0&1
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}
Location Path:
Migration Rank: 0xF000FFFFFFFFF100
Present: falseStatus: 0xC0000719


Code:
Device configured (usb.inf)

Device USB\VID_0000&PID_0002\6&1330e4d7&0&3 was configured.
Driver Name: usb.inf
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}Driver Date: 06/21/2006
Driver Version: 10.0.14393.0
Driver Provider: MicrosoftDriver
Section: BADDEVICE.Dev.NTDriver Rank: 0xFF0000Matching
Device Id: USB\DEVICE_DESCRIPTOR_FAILUREOutranked
Drivers: usb.inf:USB\DEVICE_DESCRIPTOR_FAILURE:00FF2000
Device Updated: falseParent
Device: USB\ROOT_HUB30\5&35f8b9e6&0&0


Code:
Device not started

Devic... Read more

Read other answers
RELEVANCY SCORE 129.2

I have Windows 7 Ultimate. Since very recently an unknown device keeps popping up in the device manager every time I start Win. It's reported location is within the front USB root hub but I haven't changed there anything lately. The device status reports "Windows has stopped this device because it has reported problems (Code 43)". I can uninstall/disable it but it will get picked up again the next time I reboot. All other usb devices (mouse, keyboard, web camera, APC UPS, external drive, printer) work fine. How do I get rid of this nuisance so that it doesn't reappear?
 

A:Unknown device: Windows has stopped this device because it has reported problems (Cod

Read other 6 answers
RELEVANCY SCORE 128

Was trying to plug my Toshiba 1tb External hard drive in to retrieve music off it and it wont recognize the drive. Device manager revealed the yellow triangle and error message. It works on my wifes hp streambook and also my kids stream book both are running wondows 10 like mine. I have tried nearly 10 different suggestions from google searches and have gotten nowhere. The only thing I couldnt try was turning off the usb in the power options, for some reason mine doesnt display that option. My notebook only has 1 usb port so I cant try a different port. Any suggestions or fixes?

Read other answers
RELEVANCY SCORE 128

having trouble installing an Epson WF-2530 printer onto win 8.1 machines.
i have 3 win 8.1/64 bit machines. it will install and is working on only one.
used the same installation disc, and install process, and cables with all 3 machines.
googling the problem shows plenty of stuff mainly updating drivers. done that, still no good.
Not sure why it works on only one, a generic clevo laptop w550eu.
thoughts???
the installation process stumbles when it asks you to connect the printer cable to the computer.

Read other answers
RELEVANCY SCORE 128

I have a flash drive that I previously used in public computer lab (where many viruses linger) the other day to do my work. As I got home, the flash drive isn't working anymore, saying "USB Device not Recognized". I also noticed that it really took me a while to finally, safely remove it from the computer lab's PC. So I actually wonder if it actually removed my flash drive properly.

On Device Manager, it says "Unknown USB Device (Device Descriptor Request Failed)".
On the Properties, the device status says "Windows has stopped this device because it has reported problems. (Code 43) -- A request for the USB device descriptor failed."

My flash drive is a Kingston Flash Drive DataTraveler (DT100) 16GB, and my PC is running on Windows 8.1.

Things I have tried:
- Shut down my PC, unplugged power and removed battery, waited for a while, booted my PC and try plugging in again.
- On Device Manager, uninstalled it and scanned for hardware changes, it still returns as "Unknown USB Device".
- On Device Manager, I clicked "Update Driver Software..." and it returns me a message saying "The best driver software for your device is already installed".
- Unfortunately, when I visited Kingston's website to check if there is driver for this specific flash drive, there isn't any... "There are no downloads or drivers available for this product".
- Used Windows 8's Troubleshooting tool. It only detected my problem, but was un... Read more

A:USB not recognized (Device Descriptor Request Failed)

if you have tried on other systems using different OS then the error is normally because of issues with the item not the PC , it might be 'confused' or have corrupted data or be faulty.

If you have the data still stored elsewhere...then you may be able to reset the flash drive and see if it recognises it then.

I'm not sure if there is a reset switch anywhere on that stick.

Read other 5 answers
RELEVANCY SCORE 128

Hi all,

(Unknown USB Device - A request for the USB device descriptor failed)

Massive problem I have encountered since buying a new laptop pre-installed with Windows 8.1

I have 3 external USB storage devices - 1x Corsair "Slider" 64GB, 1x HiTachi Touro 750GB, & 1x HiTachi 4TB external drive. ALL drives are coming up with the same error message and are not being recognized by Windows 8.1

The strange thing is, I also have another 2 PCs - one with Win7 and one with WinXP and the drives work without issue.

I've spent the last 4 days scouring the net looking for answers, and thus I am here hoping someone can shed some light as to why ALL of these drives do not work on this new laptop pre-installed with Windows 8.1?

Even stranger still is I have other thumb drives, a cheap Transcend 32GB (which is USB3.0) and a few cheapo (USB2.0) drives of various sizes by Strontium, Lexar and so on which work perfectly.

But the one that has me o.O is an expensive 64GB thumb drive called the Mach Extreme which also works perfectly with this laptop???

So all up 2x HiTachi drives & 1x Corsair thumb drive are not working and its driving me bonkers!

If no drives worked at all, then I would be seeking the manufacturer for maybe a faulty component. Dodgy USB ports, or maybe a motherboard problem. But having a handfull of drives, of various makes, sizes and both USB3.0 - 2.0 fully working leaves me scratching the old chrome dome as to what could be the issue

Would really real... Read more

A:A request for the USB device descriptor failed. (error43)

You can mark this thread as SOLVED!

Okay here's the fix that worked for me, maybe it will work for you.

I've always updated drivers, WinXP, Win7 and so on, the same way - download the driver, go into device manager and select browse, then point windows to the downloaded driver to update the necessary files. Its always worked that way for me for as long as I can remember.

Not so it appears with windows 8 - for some strang reason.

For me I had to update to the latest Intel Chipset Drivers, but instead of the tried and trusted methos above, you simply hit the setup.exe and let windows 8 do its thing. Believe it or not, but this fixed the issue.

Yes I had already updatd to the latest Intel Chipset Drivers using the device manager method, and yes windows "did" update ...someting??? But the USB devices were still showing the Unknown USB Device error. But using the setup.exe fixed the everything and all my USB devices are now working perfectly with Windows 8.

How, why, who knows, but I hope this works for others with the same problem.

Read other 2 answers
RELEVANCY SCORE 126.8

Hello, The left USB socket on my X250 has started to return the message Device Descriptor Request Failed, but the right hand USB works as normal. I rarely used the left hand one so I am unsure for how long this has been the case, but now I am very keen to start using a USB keyboard so I am very keen to get it working again.I have tried uninstalling the device and reinstalling, and searching for new drivers.Thanks in advance for any help,Dave

Read other answers
RELEVANCY SCORE 126.8

Hello Ladies & Gents.

I would like to ask for your assistance on this slightly annoying problem.

I have 1 pair of Razer Megalodon USB headphones, on the start up of Windows 8.1 these headphones are not detected correctly. The only proof I have of this is in the device manager displays:

Universal Serial Bus Controllers -
Unknown USB Device (Device Descriptor Request Failed).

(Please see attached screenshots)

Once the device is disconnected and reconnected device manager then displays:

Universal Serial Bus Controllers -
USB Composite Device

The device then shows in "Audio inputs and outputs"

Cheers,

Mr Collective

Attachment 38815

A:Razer Megalodon - (Device Descriptor Request Failed)

Razer is well known for BSOD drivers and problems, otherwise. (And taking very old drivers, changing nothing at all, giving it a new date and then claiming "Compatible!" with new OS.)

Perhaps give a shot with uninstalling their software, rebooting, the re-installing.

Make sure using the latest.

When all is said and done, you might just have to live with it.

Can't hurt to make sure chipset drivers are up to date. If Intel chipset, search their driver site for "Inf"

Read other 2 answers
RELEVANCY SCORE 126.4

hello guys in my device manager there is a yellow triangle on a usb device driver saying : a request for device descriptor request failed first i thought maybe 1 of my us ports not working but when i tested all ports are working even card reader but the error is still there i updated drivers (chipset - etc) but it didnt help so i want to know how to get rid of that error and what is the problem with my laptop?
note: sometimes when i trun on my laptop that error is gone mysteriously and most of the times its showing up
note: i recently changed my wireless adapter tho the orginial adapter was a bt/wifi combo but the new one is just a wifi adapter and i have an ssd installed instead of dvd optical drive and both are working well
note: things i already tried: disabling fast boot-updating generic usb drivers-taking out battery for 5 minutes-updating drivers

Read other answers
RELEVANCY SCORE 118

i have hp mini 210 model laptop and m having problem with my bluetooth and usb .
in device manager there is one unknown device . device status is Windows has stopped this device because it has reported problems. (Code 43). hardware id is USB\UNKNOWN
when i insert pendrive while laptop is on it doesnot respond (any pendrive). but when i restart (keeping the pendrive inserted) laptop reads it. and also bluetooth doesn;t work
please help

A:Windows has stopped this device because it has reported problems. (43)

  
Quote: Originally Posted by amrit das


i have hp mini 210 model laptop and m having problem with my bluetooth and usb .
in device manager there is one unknown device . device status is Windows has stopped this device because it has reported problems. (Code 43). hardware id is USB\UNKNOWN
when i insert pendrive while laptop is on it doesnot respond (any pendrive). but when i restart (keeping the pendrive inserted) laptop reads it. and also bluetooth doesn;t work
please help


Check the information at;

How To Fix Error Code 43 (Windows has stopped this device because it has reported problems)

HTH

Read other 1 answers
RELEVANCY SCORE 118

Hello,
I recently purchased a gaming mouse and it got shipped yesterday night.
I've been banging my head against the wall trying to figure out how to make my mouse work on my computer.
I keep getting this error whenever I try to plug in the mouse. I's a USB 2.0 mouse.

Windows has stopped this device because it has reported problems. (Code 43).

I've manually tested each and every USB port on my computer and they ARE working fine with other devices. It just don't work specifically with this mouse.
I've installed the drives from the CD supplied with the mouse by the vendor.
I've uninstalled USB port, restarted computer multiple time with little to no success.
The computer meets the specifications of mouse required.

The mouse works fine on my laptop running windows XP on which I can just plug and use it. There's even no need to install drivers manually. So, I'm kind of frustrated and clueless about this. Any help is appreciated.
I'm running Windows 7 Service Pack 1(64 bit). Please let me know if I can provide any other information.

A:Windows has stopped this device because it has reported problems.

... that basically means the driver has failed. Uninstall from the device manager then do a Scan for hardware changes...

Read other 4 answers
RELEVANCY SCORE 118

Well I have a MIDI keyboard instrument that was working on my Win7 x64 machine, with proper drivers, and then it just stopped. I get this error message "Windows has stopped this device because it has reported problems. (Code 43)". Oddly it works on an XP machine I tried, while it fails on other Win7 and Vista machines I've tried. Could this device have gotten damaged? If so, is there any way to have it detected in Win7, considering it works in XP still?

If anyone is wondering it's a Yamaha ez-250i keyboard instrument.

Also, I used a 12 foot usb cord. I remember reading something about USB only being designed for 6 feet or so, could this have damaged the device? Thanks.

A:Windows has stopped this device because it has reported problems.

  
Quote: Originally Posted by cephasara


Well I have a MIDI keyboard instrument that was working on my Win7 x64 machine, with proper drivers, and then it just stopped. I get this error message "Windows has stopped this device because it has reported problems. (Code 43)". Oddly it works on an XP machine I tried, while it fails on other Win7 and Vista machines I've tried. Could this device have gotten damaged? If so, is there any way to have it detected in Win7, considering it works in XP still?

If anyone is wondering it's a Yamaha ez-250i keyboard instrument.

Also, I used a 12 foot usb cord. I remember reading something about USB only being designed for 6 feet or so, could this have damaged the device? Thanks.


have you confirmed that the Yamaha is compatible with Vista/win 7? Chances are the USB cord has not damaged the device but may be the reason it is reporting problems.

Read other 4 answers
RELEVANCY SCORE 118

Under display drivers in my device manager, I have two things listed. AMD Radeon 6600M and 6700M Series, and Intel(R) HD Graphics 3000.

The AMD Radeon is the one showing the error code 43. I've scanned for driver updates, it says the driver is up to date. I've tried using AMD's driver updater tool to scan my computer and that, too, says my driver is up to date.

So what's the problem? Is it just because it isn't compatible with Windows 8 (yet)?

Read other answers
RELEVANCY SCORE 118

My mouse (USB) stopped working. I already try to disable wait.. and enable again, update driver(say that has the best update already), uninstall and install again(then says that the instalation was failed), and it is only the mouse that isnt working, because my pen driver is working great, like orders diveces USB. What do I do?

I didn't try to see if the mouse works in my other PC and I didnt try to see if other mouse works, but I'ill see this reaty now, antill then I hope you help

Windows found software for your device but encountered an error while attempting to install.
Windows has stopped this device because it has reported problems (code 43)
Greetings LekiS
PS:Sorry about my english guys

A:Windows has stopped this device because it has reported problems(c.43)

what where you doing when the mouse stopped working?

Read other 2 answers
RELEVANCY SCORE 117.6

Hello everyone,
i hope you can help me sorting out this issue that is causing me a hard headache at the moment.

I've bought this new Lenovo Z50-70 laptop with windows 8.1 preinstalled on it. Fresh new.

I'm trying to connect via usb a guitar audio interface (Line6 POD HD500) so i installed the drivers via the .exe setup file i downloaded from Line6's site.
The device worked fine on my previous HP pavilion with windows 7.

Now when i completed the installation, i connected it and i had this error:Windows has stopped this device because it has reported problems. (Code 43)A request for the USB device descriptor failed.
I used slimdrivers to update all the other drivers, in case it was a conflict causing the error.
I checked via command prompt with command "pnputil -e" and i saw a driver from the vendor of the device listed, so it is installed correctly i think.
I tried all USB ports i have, 3.0 and 2.0 on one side of laptop and 2.0 on other side.

When on device manager, if i click update drivers and choose the "let me pick from a list of device drivers.." i don't see the company name of the device.

i saw that another guy posted a really similar problem on SevenForum and he figured out how to force windows to use the drivers but he didn't post the solution.. Here is the post: Can't get Windows 7 x64 to use the drivers I've installed repeatedly Solved - Windows 7 Help Forums

Edit: the software tool from which i can update drivers and other things for my g... Read more

A:USB device not recognized. Device descriptor request faile

I am having the same exact problem as you, Cattanius. I couldn't get it to connect to my computer over 2 years ago and then just decided to try it the other day. I didn't expect anything to show up in device manager because I thought the usb port was fubar, but then I see the same message you got and all of the sudden there's hope! I hope.

Read other 1 answers
RELEVANCY SCORE 108.4

Yesterday I turned on Tmhsb and Suddenly came a problem error 43 I tried everything Htktnti drivers took Tcrtis put N. screen. Tmhsb in I start to look like white spots not knowing the make: (

I installed all the drivers I tried everything I do not know all software reformatting cleaning delicate same Windows has stopped this device because it has reported problems. (Code 43)


[IMG][/IMG]

A:device because it has reported problems. (Code 43) Help me pllz

Welcome to the forum eddy1991.
Please use this Tutorial to post pictures/screen shots.
Your picture sends me to some strange place.

By Brink:
Screenshots and Files - Upload and Post in Seven Forums

Read other 3 answers
RELEVANCY SCORE 108.4

Well I tried again I did everything fine no it makes me Tsgiah Hzaot what to do to fix it?

A:device because it has reported problems. (Code 43) Help me pllz

Have you completely uninstalled and reinstalled the nvidia driver? If you dont know how to do that ill give instructions below
Start > Right click Computer > Manage
Click the little arrow next to "Display drivers"
Right click (in your case) NVIDIA GeForce 8800GT(Microsoft Corporation WDDM V1.1) > Properties
Then click on the tab "Driver"
Then Click "Uninstall"
-----------------------
Make sure you have a new driver ready for your card. also make sure the driver IS NOT a beta.

Read other 9 answers
RELEVANCY SCORE 106.4

After installing window on my laptop (Lenovo Ideapad 100) found out that the USB port are not working although if i plug in a phone it indictaed charging and i plug in my hard drive it shows the led light but the USB cant read any device not even a USB mouse works on the system . Please kindly help me with this error. 

























Screenshot (6).png ?101 KB

Read other answers
RELEVANCY SCORE 105.2

We have some symbol windows mobile-based handheld devices that we use in our business.  We connect these devices to our computers to copy files to.  This all worked fine until recently the devices come up as failed.
It appears in device manager with a yellow exclamation point.
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.  (Code 19)
I've tried all the solutions I can find on the web and none of them work.
Including:
Uninstall the device in device manager and scan for changes.  It downloads the driver from windows-update and returns to code 19.
Tried hardware troubleshooter which basically seems to automate the process of uninstalling and scanning.
I've tried removing windows media player 12 feature and adding it back.
I've tried deleting USB controllers from Device Manager and rebooting, it re-detects them all and still gets code 19 on the device.
I've tried deleting upper and lower filter values in the registry which I found out later is mainly for CD/DVD devices, that didn't fix anything.
I've tried removing and re-installing Windows Mobile Device Center and driver pack and that did not fix it either.
Additionally Canon Powershot camera gives us similar results.  MTP USB Device failed.  
This is so far happening on 3 of our workstations that we know of.
At first we thought it was due to windows updates but nothing recent has been installed that looks rela... Read more

A:SOLVED:Windows Mobile-based device and Canon Powershot cameras showing code 19 and MTP USB Device failed.

Hi,

 

Thanks for posting in Microsoft TechNet forums.

 

Do you have Kaspersky installed? Kaspersky Filter driver caused that any USB device could not connect.

 

It is suggested to have a look at the following registry. Make a backup of it and remove the Upperfilters setting:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{EEC5AD98-8080-425F-922A-DABF3DE3F69A}

“Upperfilters” = klfltdrv

 

If the issue persists, please find a working machine and compare the registry settings.

 

Best Regards

Magon Liu

TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]

 
Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 13 answers
RELEVANCY SCORE 104

Hi.. Recently bought HP Notebook 15-ay010nq with AMD Radeon R5 M330 video card. Am instalat driverul de la voi de pe site,dar din pacate nu imi recunoaste placa video.. Am mers la AMD pe site si am incercat sa downloadez driverul si de acolo,dar tot in zadar.. Cand ma uit in device manager imi apare asta.Windows has stopped this device because it has reported problems. (Code 43) Iar la iconita am semnul acela de exclamare..  Pls help me.

Read other answers
RELEVANCY SCORE 103.6

Most of the threads on this error are old, (2015) so I am starting a new one. I only notice it when I happen to be in the device manager. I have no problems with any of my connected USB devices (that I have observed).

I have tried uninstalling it, and rescanning and it pops up again, so apparently it is something that is connected. Without disconnecting All of my USB devices one at a time (which I am wont to do, as it is not bothering me, other than that it is there!) It has been there for quite a while, so apparently is not anything new being connected.

Is there no way to identify WHAT is connected to this port, or even what port it is?

BTW, it only shows up in the USB Controller section, no matching errors in any of the devices themselves!

Curiouser and curiouser...

Read other answers
RELEVANCY SCORE 101.6

hello    i'm an embedded developer. i have an usb type ic programmer to burn microcontroller. now i'm getting this error "Unknown USB Device(Device Descripter Request Failed)" while plug my usb programmer into my pc socket. but this same hardware support in my friend same hp430 pc.

Read other answers
RELEVANCY SCORE 101.6

Greetings folks

I have a problem that bugs me for years, I never intentionally solved it, sometimes those errors disappears and all USB ports work fine, sometimes they do not. So anyone can help me please, it would be great.

Some of my ports do not work all the time, I cannot identify a specific moment. Inside the Device Manager, Universal Serial Bus controllers, I get 1, 2 or more "Unknown USB Device ( Device Descriptior Request Failed )", sometimes more sometimes less.

CPU: Intel Core i7 3770
Motherboard: AsROCK H77 Pro4/MVP
Windows 10 all available updates downloaded and installed as of today, and everyday. The problem appeared on Win 8 or 7, not sure when. So it's not necessarily Windows 10 specific. I ported it to 10.
Here is what they look like:
http://prntscr.com/d6rm6k

Bios is up to date. Chipset drivers updated, various solution tried from googling, I even managed to make all USB ports stop working testing some of these solutions, I had to restore windows from a ghost image I had.

It's like these USB ports remain suspended sometimes.

Any advice on what to try? The most annoying part is that from the frontal USB ports some stop working randomly too.

Thank you

Read other answers
RELEVANCY SCORE 101.2

I have two WD "My Book" 3.0 USB drives.  Previously, they both worked fine.  Now one of the two drives is getting a device descriptor request failed message.  The other drive is fine.  I have tried different 3.0 inputs on the system both in back and on top in the front.  Any ideas on why the same drive isn't working?  I have tried both on other systems and they work fine.  The other systems I have tried them on are WIN7 and WIN 8.1.











Solved!
View Solution.

A:usb 3.0 drives getting device descriptor failed error

Hi there slovey  Have you, by any chance tried with another USB cable? I wouldn't make sense to change things as the device works on other systems but it wouldn't hurt to use the other My Book's cable with the problematic one just to rule this out as a potential cause. I would also check this thread and see if the offered solutions there help.  Keeping your OS, BIOS and drivers up to date is also an important part of the troubleshooting process. I'd also check if there's a new update specifically for the driver responsible for the communication between the drive and the system. Post back if you need more info! Captain_WD.

Read other 4 answers
RELEVANCY SCORE 100.8

I have tried a few different windows images, windows troubleshooting feature, and the latest versions of the drivers.
I've tried uninstalling and reinstalling drivers, disabling and re-enabling, re-imaging, updating windows. None have had the effect of actually making it work. I'm running win 10.0.10240, on dell latitude 5285 and 5289. This is affecting the entire Intel Integrated Sensor Solution Driver and all the included sensors, compass, accelerometer, gyroscope GPS and ambient light.

hardware id: HID\Vid_8087&Pid_0AC2
I would like to resolve this so that we can order tablets and have them work right in our org.

Read other answers