Over 1 million tech questions and answers.

why can't show processor and memory ram from bios or from properties of window after serial changer

Q: why can't show processor and memory ram from bios or from properties of window after serial changer

Read other answers
RELEVANCY SCORE 200
Preferred Solution: why can't show processor and memory ram from bios or from properties of window after serial changer

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 70.8

Hi all,
Previously I Installed Windows 8 Pro on my PC and another Same PC of my brothers.... Both PCs are exactly same
i.e. Compaq Presario SR1924IL except our RAMs and Hard Disk... He has 1.43 GB Ram and I have only 1 GB... He has 160 GB hard drive and again, I have 80 GB Hard Drive but when We installed Windows 8 Pro on our PCs the System Properties Are Different... We have Pentium D processor which in His Case is 2.80 GHz and in my case it's 2.67 GHz.. Can Someone Please Let me know what is gone wrong??? I am irritated with this processor memory... Please Someone Give me a Solution.... ...

Thanks For Reading.....

A:System Properties Showing Low Processor Memory !! ?

Processor memory, what's that ? Are you running 32 bit or 64bit windows ? With so much RAM you should be both using 32bit version. The rest of it I don't understand what you are talking about. How much physical memory do you have on each computer. Also check BIOS in both of them and make sure they are both set identically.

Read other 9 answers
RELEVANCY SCORE 70.8

I've 256 MB of RAM but in system properties I can only see that 224 is available.Why is it happening?
 

A:Solved: Why does system properties show less memory?

It is being shared with the vido adapter - very normal
 

Read other 1 answers
RELEVANCY SCORE 60

I mistakenly tried M/S Backup to back up My Documents so I can reformat...

Should have known better as I know it is not good...

Anyway I used CD-RW discs all new... and as the backups didn't record I erased the discs. Although they open up and show completely blank, they show as full in properties...trying to use CD Creator as I normally do tells me that the discs are 10 MB when I know they are 650 MB....

Does anyone know why this is...I'm not bothered about the discs they are cheap enough to throw away and replace, I'll carry on copying and pasting or using CD Creator in the future it's just bugging me as to why this happens...
 

A:CD-RW discs show blank but show full in properties

don't know why it's doing it, but have you tried to reformat to reclaim the space?
 

Read other 3 answers
RELEVANCY SCORE 56.4

I don't remember how long ago I submitted this problem, but it does not appear to have been addressed (or if it has I cant find the reply) I still have field within the properties box which do not have corresponding columns within the Explorer window. 
I seems to me to be a real case of the left hand not knowing what the right hand is doing as whoever designed these two items didn't exchange details. This was my original query "
Using Windows 10 / .wma & .wmv "properties" fields / Folder and file display columns. There are two fields in the properties
box "Content provider" and "Group description" which do not have corresponding columns within the folders. As I use both boxes, what do I do>" Nothing has changed!

Read other answers
RELEVANCY SCORE 55.6

Hello.
Im using vista ultimate x64.

When i access the local area connection window where all the TCP/IPv4 and
TCP/IPv6 are. I am unable to click on properties on any of them (yes i am the
administartor)
By other words, i am unable too access the window where you can change the
"Obtain an ip adress automatically" and "obtain dns server address
automatically" options are.

When i sellect TCP/IPv4 or TCP/IPv6, the properties button is just gray. As
is the unnistall button. When i hit the configure button, i just get sendt
back too the desktop. I am also unable to uncheck the TCP/IPv4 or TCP/IPv6
boxes on the left side of the names (or any of the other stuff)

If I hit the install button and try too install i new protocoll, i only get
a error message saying "windows cannot find the file"

Iv'e also tried it jusing the administrator account. But it didn't help.

What is causing this problem, and how I fix it?

Thanks in advance
 

Read other answers
RELEVANCY SCORE 55.6

Hello.
Im using vista ultimate x64.

When i access the local area connection window where all the TCP/IPv4 and
TCP/IPv6 are. I am unable to click on properties on any of them (yes i am the
administartor)
By other words, i am unable too access the window where you can change the
"Obtain an ip adress automatically" and "obtain dns server address
automatically" options are.

When i sellect TCP/IPv4 or TCP/IPv6, the properties button is just gray. As
is the unnistall button. When i hit the configure button, i just get sendt
back too the desktop. I am also unable to uncheck the TCP/IPv4 or TCP/IPv6
boxes on the left side of the names (or any of the other stuff)

If I hit the install button and try too install i new protocoll, i only get
a error message saying "windows cannot find the file"

Iv'e also tried it using the administrator account. But it didn't help.

What is causing this problem, and how I fix it?

Thanks in advance

Read other answers
RELEVANCY SCORE 53.2

Hello all.

Last night i put together a computer which included a 160GB Maxtor Serial ATA hard drive.

This morning, everything was working (including HD) so i installed XP Pro SP2.

MY Power Supply is a Thermaltake 480W with adjustable fanspeed control or something like that.

After i istalled some drivers and rebooted a few times i lowered the fan speed on my PS.

Now after i did that my HD will not show up in the bios anymore.

I tried switching and reconnecting cables and still nothing.

Even loaded XP again from the CD and it tells me there is no HD.

So even though it's in there, i have no HD.

If this has happened to anyone before and you've fixed it, please let me know.

Thanx in advance.

-Pablo
 

Read other answers
RELEVANCY SCORE 53.2

When I right click my desktop and go to properties nothing will display. The mouse cursor changes to loading for a split second and then nothing happens. The same problems occurs when I go through the control panel. I have AVG anti-virus, McAfee Personal Firewall, ad-aware, and xoftspySE installed and updated. I can still use the nvidia control panel to change some settings, but I would like to fix this issue. I have tried using older display drivers, but nothing changed. Any help would be great.
 

A:Display Properties will not show

Read other 6 answers
RELEVANCY SCORE 53.2

its kind of weird problem dat in my dell laptop whenever i right click on anything and den click its properties my laptop just hangs doesnt respond and shows nothing i have to turn it off directly and den start again//

actually what happend is i need to install fresh copy of windows so i formatted my laptop with its original win7 home basic dvd during installation when it comes to "Expanding files" it doesnt proceed it remains 0% and i have to restart again n den begin again new installation without formatting my windows drive this time n den it increases so slowly dat i have to wait for 1:30hour to complete the installation..why is dat so??
is der any problem with my dvd or my dvd rom?
i dont think so it might b the problem becoz i bought it 1 month ago n it was the first time i used win7 dvd..i have also deleted recovery disk please help me what shouldd i do?
i have core i3 processor
3GB RAM
512MN ATI graphics
plz help
 

A:doesnt show properties

Read other 7 answers
RELEVANCY SCORE 53.2

When I do a "Properties" on my J: HDD it shows "Used space", "Free space" and "Capacity" for this HDD.

When I do the same for my F: HDD it shows ZERO for all three. See above.

BOTH drives are NTFS. Also when I do properties on a folder on J: it shows "Advanced" properties and I can encrypt the folder. Again when I do the same on a folder on F: it doesn't show "Advanced" properties and I can't encrypt the folder?

Why is this and how can I make disc F: behave like disc J:?

Thanks in Anticipation....

PS I'm on the latest update of Windows 10 Pro on a 64bit desktop.

A:Why does one HDD show more properties info than another?

This would help us determine the problem:
Disk Management - How to Post a Screenshot of - Windows 10 Forums

Read other answers
RELEVANCY SCORE 53.2

I finally got my phone to stay connected via bluetooth and of course I no longer have any hair to pull out.
now I am trying to import my contacts to the phone, which I gather can be done with a bluetooth connection via some sort of PIM that the bluetooth software recognizes. For the life of me I can't find any explicit reference to any particular PIM software that the Windows 8 bluetooth Properties dialog recognizes. Or, have I misunderstood the capabilities here? Do I have to buy and install Outlook?
I am unfortunately using Thunderbird as email & contact manager, but I've exported my contacts via .csv in the past so If I can find the appropriately compatible PIM for Win8 Bluetooth I think I can muddle through.

Any help would be ever so appreciated.

If there is a thread or other site that already deals with this, my apologies and could you point me in the right direction.

Mahalo,
HalinQuincy

A:How do I get a PIM to show up in Bluetooth properties?

When I connected my iPhone to an HP laptop with 7 installed, it connected my phone via Bluetooth and all my contacts were right in there. All of my Audio output was sent to the laptop. It was kind of interesting, I was able to call someone from the Desktop and use the mike and speaker to talk.

I believe it saved all of my contact information too, I had to delete the device from the laptop to remove them. I was kind of alarmed at the massive amount of stuff that is on my phone that showed up.

I;ve connected my iPhone to a Macbook running Bootcamp Windows 7, but it was never as complete as I saw it on the HP. Maybe the support was not included in the bootcamp drivers. But on an OEM Windows 7 system, everything was there.

You have to go into Devices and Printers and pull up the properties of the phone. Of course I don't know what kind of phone you are connecting, but my iPhone was completely accessible (as a phone and Audio Device) in that system. It makes me want to get some kind of Bluetooth card for mu Main PC so I can connect my Phone up while I am working and that way I can hold conversations right from my workstation.

By PIM I take it you mean Personal Information Manager, all of your contacts and numbers and email addresses? The Contacts should all be there in the device Property Sheet, just look around.

Basically what I am saying here, is that an iPhone when connected to a Windows Computer via Bluetooth, creates it's own interface, you don't need any extra software ... Read more

Read other 2 answers
RELEVANCY SCORE 53.2

Strange problem. Using win 7 premium x64
SP1 shows a successful install in the update history. Win update shows 'up to date' when checking.
The only anomaly is when I check the properties page of the 'Computer' from the start menu it does not show under the Windows Edition section of the page.

Any ideas?
Thanks

A:Win 7 SP1 does not show in computer properties

sl2222
* If installed it should indeed be showing via Start > right click Computer > Properties >Viewing Basic Information > Windows Edition.

* Have you checked in Event Viewer?
Type eventvwr in search.
Go to the Windows Logs > Application { then System} > in the left hand column.
Note any error or warning that relates to when you installed SP1.
Please note the event ID, and the source codes and tell us what they are.

Read other 9 answers
RELEVANCY SCORE 53.2

When I do a "Properties" on my J: HDD it shows "Used space", "Free space" and "Capacity" for this HDD.

When I do the same for my F: HDD it shows ZERO for all three. See above.

BOTH drives are NTFS. Also when I do properties on a folder on J: it shows "Advanced" properties and I can encrypt the folder. Again when I do the same on a folder on F: it doesn't show "Advanced" properties and I can't encrypt the folder?

Why is this and how can I make disc F: behave like disc J:?

Thanks in Anticipation....

PS I'm on the latest update of Windows 10 Pro on a 64bit desktop.

A:Why does one HDD show more properties info than another?

This would help us determine the problem:
Disk Management - How to Post a Screenshot of - Windows 10 Forums

Read other 1 answers
RELEVANCY SCORE 53.2

whenever i go to the property of the file it always shows that it is READ ONLY file. when i remove this option the next time it is automatically come. please give me the solution

Read other answers
RELEVANCY SCORE 52.8

Hello every body!!!!
I'm in the development of the software product license copy.So I would like to find the CPU Processor Serial Number,so there is any one who is able to tell me.
 

Read other answers
RELEVANCY SCORE 52.4

i right click on the desktop and hit properties but nothing happens....help me solve this issue
 

Read other answers
RELEVANCY SCORE 52

Hi,

When I go to the General tab under System Properties, the processor is not listed. The RAM is listed but not the CPU.

I am unable to install McAfee and was told by the McAfee support rep that this was the reason.

Any ideas why the processor is not listed?

Thanks for your help.

Mike

A:Processor is not listed on System Properties screen

Hello and welcome to the forum!

Now you have a Good reason not to install McAfee!
Use a better product as I think your system might be infected

Read other 1 answers
RELEVANCY SCORE 52

Hey there

i've tried both dxdiag and system properties in Windows 7 yet both doesn't show my graphic card

my computer is a laptop and this is the one shows up

Lenovo G480
Processor : Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
RAM : 8.00 GB
Graphic Card : Inte(R) HD Graphics 4000

this laptop clearly have Nvidia Geforce GT 635 (apparently i cannot post picture of it =/) which its driver have been fully updated

it has no problem on playing games though (Starcraft II, XCOM, Tomb Raider 2013, DMC4)

it just felt weird is all
 

A:System properties don't show graphic card

Read other 11 answers
RELEVANCY SCORE 52

Hey I have a irritating problem. I have a laptop that I just recently got rid of a nasty trojan. After removal, it will no longer let me open up the control panel or go to My computer properties. The error reads:

This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.
Same error goes for the my computer properties.

Here is my HJT log.
Logfile of HijackThis v1.99.1
Scan saved at 10:28:49 AM, on 9/7/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\Program Files\Webroot\Spy Sweeper\SpySweeper.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\BellSouth Internet Tools\blsloader.exe
C:\WINDOWS\system32\TPWRTRAY.EXE
C:\WINDOWS\system32\TFNF5.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\Program F... Read more

A:Control Panel and My Computer Properties Won't Show Up.

Hi toolage and welcome to TSG.

It looks like you certainly had a nasty trojan previously.

Scan with HijackThis and place a checkmark in the boxes before the following entries:-

R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
F2 - REG:system.ini: Shell=
O2 - BHO: IEHlprObj Class - {ABCDECF0-4B15-11D1-ABED-709549C10000} - blank (file missing)
O7 - HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\System, DisableRegedit=1
O9 - Extra button: (no name) - {CD67F990-D8E9-11d2-98FE-00C0F0318AFE} - (no file)
O16 - DPF: {1D4DB7D2-6EC9-47A3-BD87-1E41684E07BB} - http://ak.imgfarm.com/images/nocache...up1.0.0.15.cab
O16 - DPF: {56336BCB-3D8A-11D6-A00B-0050DA18DE71} (RdxIE Class) - http://software-dl.real.com/289ca1f1...p/RdxIE601.cab
O20 - Winlogon Notify: xxyxw - xxyxw.dll (file missing)

Close all other windows except HijackThis and click the "Fix Checked" button.

Restart your machine.
Download WinPFind3U.exeto your Desktop and double-click on it to extract the files. It will create a folder named WinPFind3u on your desktop.

Open the WinPFind3u folder and double-click on WinPFind3U.exe to start the program.
In the Processes group click All
In the Win32 Services group click Non-Microsoft
In the Driver Services group click Non-Microsoft
In the Registry group click Non-Microsoft
In the Files Created Within group click 60 days Make sure Non-Microsoft only is UNCHECKED
In the Files Modified Within group select 30 days Make sure Non-Microsoft o... Read more

Read other 1 answers
RELEVANCY SCORE 52

Right clicking on my desktop and then clicking properties doesnt do anything. The properties windows appears for a fraction of a second, and then disappears. The same happens even when I try to access display properties from the control panel. I am using Windows XP Service pack 1 on a P4 2.6GhZ machine with 786MB Ram.
I have thoroughly checked for viruses and any spyware but none could be found. What has gone wrong.
 

A:Display properties wont show in Windows XP...

Check your event viewer and see if there are any errors logged.
 

Read other 1 answers
RELEVANCY SCORE 52

Virtually every file shows read only when I right click on it and choose properties. In uncheck read only, then click apply and choose applies to all subfolders and files. Windows appears to change the properties (a window opens up and a green progress bar fills). But if I click OK and close properties, when I look at properties again, they are shown as read only again.

This happens both when I am logged in under my user name, as well as if I log in as administrator.

What's the deal? Am I doing something wrong. The only difficulty it's created so far was when attempting ti embed a cover art JPG into an MP3 file in my music library.

A:All files show Read Only in Properties- I cannot change

Hello patagriff,

Are you sure that it's read only.

If it's got a dot or blank in the Read-only box, then it's not set to be read only.

Only when it's checked is it read only.

Keep clicking on the Read-only box to see the different options.

Hope tis helps,
Shawn

Read other 3 answers
RELEVANCY SCORE 52

hi guys..
is there a program or a way to change the size of a file?i mean for example i have a music with 4mb and i want to when anyone watch the propertise of this song , it shows 10mb to him???

A:show wrong size of a file in properties

no one has my answer???

Read other 4 answers
RELEVANCY SCORE 51.6

Hello,

A newbie here that just completed a first-time new Win7 PC build. Successful installation of Win7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage.

BIOS sees all HDDs, but are not viewable in Disk Management.

System Specs:
Antec Nine Hundred
ASUS P6X58D-E MOBO
Intel Core i7-980 3.33ghz
24GB (3 x 4gb) Corsair XMS3 1600mhz RAM
PNY Quadro 4000 2GB VC
Corsair 850TX 850W PSU
1 WD 600GB SATA HDD for OS
2X WD 500gb SATA HDs (previously used on WinXP system for storage)
2X WD 1T SATA HDs
1 Pioneer Blue Ray Burner SATA BDR

BIOS SATA Order:
SATA1=WD 600GB
SATA2=WD 1T
SATA3=WD 1T
SATA4=WD 500GB (previously used as storage on XP system)
SATA5= Pioneer BDR
SATA6= WD 500GB (previously used as storage on XP system)

SATA configuration is enhanced. BIOS is 0701. Marvel 9128 Controller [IDE Mode] PCI/PnP is set to [NO] which was the default setting. The grey SATA1-6G headers are not in use.

Device Manager lists all drives.
However, only three are visible in Disk Management. Missing (1) WD 500GB (previously used on WinXP system) and (1) new WD 1T.

What am I missing here?

Thanks in advance.

A:HDDs Show in BIOS, But Do Not Show in Disk Management

Are you sure that its not just at the bottom (of Disk Management) and not formatted yet?

Read other 3 answers
RELEVANCY SCORE 51.2

Hi!

I want to use in my program view properties of file or folder by COM Surrogate calling dllhost.exe

Don't know use, can anybody help me?
I know only path and it's shown in Task Manager:
"C:\Windows\System32\dllhost.exe"

Thank you very much!

Miro

Read other answers
RELEVANCY SCORE 51.2

I'm running windows 2000 server with SP2 on a Compaq Proliant 1600 with an embedded NIC. I noticed that the ethernet adapter does not show up in the My network places properties. I have tried to get it back with tweekUI, Removing it from Device manager and reinstalling it, and ran an in-place upgrade. I have also disable the embedded NIC and tried adding a new PCI ethernet adapter, it too fails to show up. I can see the card in the command line. I have tried the netsh command to tie an IP address to the adapter and made it persistant, but the changes are lost on mandatory reboot. In order to keep the server up and running I have made it a DHCP client so I can use the machine. All comments are welcome on this one.
 

A:NIC card doesn't show in My Network Places properties

**** UPDATE **** I found a MS KB article on this and it was the dcom issue that eas the problem
http://support.microsoft.com/?kbid=254631:cool:
 

Read other 1 answers
RELEVANCY SCORE 51.2

Hi,

If you click on a folder and right click it > properties, the security tab as seen in http://www.unixwiz.net/images/evo-noadmin-4.gif .

I have a network with XP Pro Service Pack 2

Has anybody any ideas for it to appear?

Thanks

PC Doctor
 

A:Solved: Security tab in the file properties doesnt show.

I had to disable the simple file sharing in Tools>Options>Advanced Settings!
 

Read other 1 answers
RELEVANCY SCORE 50.8

The laptop is connected to a 100/1000 SwithcIt uses a category 6 Cable.But in the advanced Properties show only. 10 Half and Full, 100 Half and Full duplex, and autonegotiation.How can configure it for 1000 MBPS speed?also is in spanish language, let me know if need help in translation. 

Read other answers
RELEVANCY SCORE 50.4

mp3 properties/summary doesnt show + i install software to edit mp3 tags....

and after having installed the AudioShell135 software it doesnt appear to be working, nothing changed under the properties etc, i have used the software before but now have re-installed Vista etc, so its not working after the installation, can anyone kindly suggest some solution for this ?

Read other answers
RELEVANCY SCORE 50

Anyone know of a list of useful properties window extensions?

I have added a mediainfo tab and a file hashing tab and I quite like the idea of having useful apps right there.

A:Properties window tabs

Put to many and it can slow things down...
Moderation everything in moderation you'll live longer and healthier.

Read other 4 answers
RELEVANCY SCORE 50

Hello, I have a problem .. again

I was following these steps until i need help on STEP 7 on this link:

http://portforward.com/networking/static-xp.htm

Well first, i went to Start>Control Panel>Network Connections and when I right-clicked on my Internet connection and i chose Properties, the Properties window showed up ..

but the Properties window disappeared.....
how can i fix this problem?
 

A:Why does my Properties window shuts off?

anyone!?

*sorry if double-posting isnt allowed here.....*

if responded, ill delete this post*
 

Read other 1 answers
RELEVANCY SCORE 50

res://C:\WINDOWS\SYSTEM\SHDOCLC.DLL/dnserror.htm#http://leader.linkexchange.com/1029798962505/X919500/showiframe?

what does this mean
 

A:properties window question

kknowles
Please create one thread per problem to avoid confusion.
Closing thread duplicate.
http://forums.techguy.org/showthread.php?threadid=91983

Dave
 

Read other 1 answers
RELEVANCY SCORE 49.2

Hey! I've just rebuilt my computer and reinstalled XP: it's gone back to the default of logging me out after 20 minutes of inactivity, and I want to change that so it doesn't log me out at all!

However, the properties window (the one you reach by right clicking on the desktop) is different to how it should be- when I first installed XP it was the normal window with the tabs for themes, desktop, screensaver, appearance and settings. However, for some reason recently all it's doing is show the tabs for themes, appearance and settings, so I can't reach the power settings that should be under the screensaver tab!

I've tried accessing power settings via the control panel, but I can't seem to find anything to turn it off or change it- any help on this one? (And any help on getting my display properties window back to how it should be, showing all the tabs?)

Thanks!
 

A:XP logging out: can't change in properties window!

copy this code into a notepad, save as restoretabs.reg

doubleclick restoretabs.reg and confirm import to registry.
 

Read other 1 answers
RELEVANCY SCORE 49.2

Hello. I have noticed a strange fact regarding my windows 7 32 bit operating system. When I delete some files in a folder, then go to properties, when i look at "Contains", it still shows the number of files i had before deletion, not the current number of files in that folder. Is there a way to repair this? Thanks in advance! (rebooted my pc, but with no success, if it is to mention)
BTW: Happy holidays

A:Strange occurence in properties window

Did you empty the Recycle Bin?

I don't see a "Contains" choice in any folder property menu. Can you tell me how you get to it, as following the directions you gave does not show it for me.

Maybe post a screen shot of it? Make sure the window you want to capture has the focus.
Press Alt+Print Screen. That will capture the active window.
Print Screen will capture the entire screen, including properties dialogs.
Start MSPaint - Start then Run, type mspaint and press Enter.
Press Ctrl+v to paste the picture in to MS Paint.
Click File then Save as and save it to your Desktop.

Start a new reply.
Click on the Browse button below the message input area.
Navigate to where you saved the picture, select it and click on Open.
Click on Attach This File.
Once uploaded, click on Add To Post to the far right of the uploaded file.
Scroll down and click Preview Post to verify the image shows.

Read other 9 answers
RELEVANCY SCORE 49.2

When I insert a CD in either of my two drives the window that jumps up giving me the options of what program to use (CD Properties ) is maximized and takes up the whole screen. This just started happening. If I double click on the top blue titlebarlbar it goes back to it's smaller (normal) size. I tried holding down the ctrl. key and closing the window but the next time the computer boots it does the same thing. It is not possible to drag this type of window in any way. The only option for this type of window in the upper right corner is an X to close it. It may need a registry edit but I don't know how. To access a similar type window open "my computer, right click on any drive, the window that opens is the same type. Any help would be appreciated.
Alan
 

A:CD Properties Window wrong size

Minimize it again and this time hold down shift and close it off.
 

Read other 1 answers
RELEVANCY SCORE 49.2

Hi, I speak french, so my english isn't perfect, if I wrote something you didn't understand, just tell me and I'll try to better explain.

I have a good computer knowledge, but the problem I have is very, very weird.
I was trying to do a test for the "indice de performance windows" (sorry I don't know the name in english, my windows 7 is french), but every time i right click properties on the "computer" window, they both disapear...
It's hard to explain, so I record it on my phone: https://www.youtube.com/watch?v=okY-ad_xIS4

Please, help me!
thanks and happy new year

A:Computer's properties window disapears

See if OPTION TWO in this tutorial helps: SFC /SCANNOW Command - System File Checker

Follow OPTION THREE and attach sfcdetails.txt in a new post in this thread.
(Use the paper clip icon just above the posting window to attach the file)

Read other 9 answers
RELEVANCY SCORE 49.2

I am running WinXP, SP2. I have a Fellows Internet Touchpad installed. When I go to the Control Panel and select the Mouse, the standard Microsoft Mouse window opens instead of the Cirque Touchpad window. The mouse is identified correctly as a Cirque Ps2 Touchpad and the driver is correctly specified. The special functions of the touchpad are all working ok, however without being able to open up the correct properties window, I cannot make any changes. It used to work properly. I have tried uninstalling the touchpad driver and reinstalling the touchpad driver. That does not fix it. Does anyone have any ideas on how to fix it?

Read other answers
RELEVANCY SCORE 49.2

Hello, I have been infested with ise32 Property window which keep appearing on window start up. I have scan my computer with Norton 360 and Window defender but to no avail. I would appreciate your help to solve them problem. Below is the Logfile. I look forward to your reply.Thank you.Best reguards,LeoComboFix 08-06-20.4 - xiaoleo 2008-06-27 1:49:14.1 - NTFSx86Microsoft? Windows Vista? Home Premium 6.0.6000.0.1252.1.1033.18.1669 [GMT 8:00]Running from: C:\Users\xiaoleo\Desktop\ComboFix.exe * Created a new restore point.((((((((((((((((((((((((( Files Created from 2008-05-26 to 2008-06-26 ))))))))))))))))))))))))))))))).2008-06-25 19:26 . 2008-06-25 19:26 <DIR> d-------- C:\Windows\System32\Adobe2008-06-24 01:48 . 2008-06-27 01:02 <DIR> d-------- C:\Program Files\Garena2008-06-23 23:25 . 2008-06-24 21:51 <DIR> d-------- C:\Users\xiaoleo\AppData\Roaming\Hamachi2008-06-23 23:24 . 2008-06-23 23:25 <DIR> d-------- C:\Program Files\Hamachi2008-06-23 23:24 . 2008-06-23 23:24 25,280 --a------ C:\Windows\System32\drivers\hamachi.sys2008-06-20 22:09 . 2008-06-20 22:09 <DIR> d-------- C:\Users\xiaoleo\AppData\Roaming\Fujitsu2008-06-15 00:17 . 2008-04-23 12:27 1,244,672 --a------ C:\Windows\System32\mcmde.dll2008-06-15 00:17 . 2008-04-23 12:27 428,032 --a------ C:\Windows\System32\EncDe... Read more

A:Keep Getting Ise32 Properties Window On Startup

ComboFix logs should not to be posted outside the HijackThis forums. It is an extremely powerful tool which should only be used when instructed to do so by someone who has been properly trained. ComboFix is intended by its creator to be "used under the guidance and supervision of an expert", NOT for private use. Please read Combofix's Disclaimer. Using this tool incorrectly could lead to disastrous problems with your operating system such as preventing it from ever starting again.Please create a new topic in the Am I infected? What do I do? forum, explaining the nature of your problem. Describe pop-ups and system tray or desktop icons that have appeared. Explain what is "going wrong" with your computer. Note any tools you have used and their respective results.If needed, we will direct you to our HJT Preparation Guide.Thank you for using BleepingComputer as your malware removal source.This topic is now closed. The BC Staff

Read other 1 answers
RELEVANCY SCORE 49.2

Mod edit; Moved to Malware Logs forum ~~ boopme All my desk top files open in a rt click window only properties and its very new I ran anti malware nothing found ran combo fix here are the results ComboFix 14-01-29.01 - becky 01/29/2014  12:00:23.2.2 - x64Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.5887.4433 [GMT -8:00]Running from: E:\ComboFix.exeAV: Microsoft Security Essentials *Enabled/Updated* {641105E6-77ED-3F35-A304-765193BCB75F}SP: Microsoft Security Essentials *Enabled/Updated* {DF70E402-51D7-30BB-99B4-4D23E83BFDE2}SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}..(((((((((((((((((((((((((((((((((((((((   Other Deletions   )))))))))))))))))))))))))))))))))))))))))))))))))..c:\users\becky\AppData\Local\Google\Chrome\User Data\Default\Extensions\kikjpgpbpnapbimplfcbcbakjacpgcebc:\users\becky\AppData\Local\Google\Chrome\User Data\Default\Extensions\kikjpgpbpnapbimplfcbcbakjacpgceb\1.25.32_0\background.htmlc:\users\becky\AppData\Local\Google\Chrome\User Data\Default\Extensions\kikjpgpbpnapbimplfcbcbakjacpgceb\1.25.32_0\crossriderManifest.jsonc:\users\becky\AppData\Local\Google\Chrome\User Data\Default\Extensions\kikjpgpbpnapbimplfcbcbakjacpgceb\1.25.32_0\extensionData\manifest.xmlc:\users\becky\AppData\Local\Google\Chrome\User Data\Default\Extensions\kikjpgpbpnapbimplfcbcbakjacpgceb\1.25.32_0\extensionData\plugins.jsonc:\users\becky\AppData\Local\Google\Chrome\User Data\Default\E... Read more

A:files open in properties window

should hav done it befor I used  adaware and it found the culprit  now I am up and running again Gosh I love this site.

Read other 3 answers
RELEVANCY SCORE 49.2

everytime windows loads, the windows 32 properties window come up. how do i stop this?
 

A:windows32 properties window on startup

1. Open Regedit
2. Browse to HKLM or HKCU then Software\Microsoft\Windows\CurrentVersion\Run
3. Remove any entries that refer to Windows 32 or System32 or whatever.
4. Close Regedit
 

Read other 1 answers
RELEVANCY SCORE 49.2

Since I am new to the forum, I'm not sure where my problem should be posted. I am also not sure if it is a hardware or software related problem, but here it is.

Suddenly, when I try to print, the print properties dialog window does not appear when i click on the properties button. It tries to activate, but immediately reverts back to the print window. This occurs in both OpenOffice 4.1.1 and LibreOffice 4.3, both of which have previously worked fine for months. I often print to both sides of the page (echo print), but can only print on one side (default) since I cannot change the properties. The only thing I can recall that might have any bearing on the problem is that I had previously printed to a file - something I rarely do. I checked the settings and "print to file" is not selected. I am printing to a HP LaserJet Pro M1530 MFP series PCL6 printer and am using Windows 8.1 operating system. I have tried reinstalling both word processing programs and have reset the printer to default settings and updated.

If anyone can help with this problem, I would greatly appreciate your help.

A:Print properties dialog window does not appear

Printers can be very frustrating to say the least. When I've had printer problems in the past, this is what has worked for me:

1. Unplug the power to the printer
2. Wait about 30 seconds or so
3. Plug it in and let it go through it's initialization
4. Then try it again

If that doesn't work, try reloading the printer driver from the HP site. If it still doesn't work, try a system restore back to the last time the printer was working successfully. That's about all the tricks I know for printers. Hope it helps ...

Read other 1 answers
RELEVANCY SCORE 49.2

Hello,
I have been infested with ise32 Property window which keep appearing on window start up. I have scan my computer with Norton 360 and Window defender but to no avail. I am currently using window vista home. Please advice me what to do. I would appreciate your help to solve them problem.
I am looking forward to your reply.

Thank you.

Best reguards,

Leo

A:Keep Getting Ise32 Properties Window On Startup

It's not unusual to receive such an error after using tools to remove malware infection.A "Cannot find...", "Could not run...", "Error loading... or "specific module could not be found" message is usually related to malware that was set to run at startup but has been deleted. Windows is trying to load this file but cannot locate it since the file was mostly likely removed during an anti-virus or anti-malware scan. However, an associated orphaned registry entry remains and is telling Windows to load the file when you boot up. Since the file no longer exists, Windows will display an error message. You need to remove this registry entry so Windows stops searching for the file when it loads. To resolve this, download Autoruns, search for the related entry and then delete it.Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there. (click here if you're not sure how to do this.)Open the folder and double-click on autoruns.exe to launch it.Please be patient as it scans and populates the entries.When done scanning, it will say Ready at the bottom.Scroll through the list and look for a startup entry related to the file(s) in the error message.Right-click on the entry and choose delete.Reboot your computer and see if the startup error returns.IMPORTANT NOTE: ise32.exe is related to the family of worms and IRC backdoor Trojans. Backdoor Trojans, IRCBots and Infostealers are very dangerous bec... Read more

Read other 5 answers
RELEVANCY SCORE 49.2

Hi,

I've had real trouble locating this particular window in Windows 10. The only way I can get to it is if I create a manual entry for a wireless network. In Windows 7 you used to be able to get to it for existing wireless networks that I had previously connected to. Does anyone have any idea how to get to it? Many thanks

A:Where is the Wireless Network Properties window from W7?

Settings app > Network & Internet > WiFi > Manage known networks. Select a network, click Properties

Wireless Network Profiles - See in Windows 10 - Windows 10 Forums

Read other 4 answers
RELEVANCY SCORE 48.8

Everytime i turn on my computer Sys32 properties appears on the screen of my window, please help me solve the problem
below is the detailed discription of the problem

Sys 32 Properties

Type: Application

Origin: c-1-3-64-8794238531-8742492-9897532

Size: 0 bytes

Thank you again
so02

A:Window Sys32 Properties Appears On Opening

Have you checked to see if you are infected? Sometimes an infection will corrupt your onboard protection - so I suggest that you try these free, online scans: http://www.bleepingcomputer.com/blogs/usas...?showentry=1252Also, could you please post a screen shot of what appears on your desktop? Here's a link on how to do that: http://www.bleepingcomputer.com/tutorials/how-to-take-and-share-a-screen-shot-in-windows/

Read other 2 answers
RELEVANCY SCORE 48.8

HelloI have been infested with Sys32 properties window which keep appearing on window start up. I have tried by Norton anti virus also but it never works. I would appeciate if you help me to solve this problem. Below is the window which appears:Sys 32 PropertiesType: ApplicationOrigin: S-1-5-21-1482476501-1644491937-682003330-1013Size: 0 bytesThanks and best regardsRajEdit: Moved topic from Introductions to the more appropriate forum. ~ Animal

A:Window Sys32 Properties Appears On Opening

The System32 folder opens at startup because of a corrupt system registry value. The value could have been corrupted for a number of reasons to include malware or installing/uninstalling a program from the Internet which did not install/uninstall itself properly.Click on the link below:http://www.kellys-korner-xp.com/xp_tweaks.htmScroll down to #260 and click "System32 Folder Opens Upon Boot" in the right column. You will be prompted to download xp_systems32opens.vbs. Save the file to your desktop and double-click on it to run the script. Since the script modifies certain registry settings you may receive an alert from your anti-virus or any script blocking program. Ignore the warning and allow it to continue.The problem could also be caused by empty run entries in your startup shortcuts which will open the system32 folder. Check the startup run registry entries and remove those entries. See System32 Folder Opens When Logging on to Windows.These steps involves making changes in the registry. Always back up your registry before making any changes. If you are not familiar with working in the registry, then you should NOT attempt to make any changes on your own. Improper changes to the registry could adversely affect your computer and render it inoperable. ERUNT is an excellent FREE tool that allows you to to take a snapshot (backup) of your registry before making changes and restore it when needed.

Read other 1 answers
RELEVANCY SCORE 48.8

Quite a bizarre one - every time I try to view the properties of any file or folder, I'm met with:

"Explorer.exe - Application Error

The instruction at "0x02e1415b" referenced at "0x000000000". The momory could not be "written".

Click on OK to terminate the program
Click on CANCEL to debug the program"

Has anyone even encountered this before? Searching the forums produced nothing.

Thank you very much for your time and effort - it's well appreciated.

A:Explorer Crashes on loading Properties Window

Quote:





Originally Posted by JohnnyUK


Quite a bizarre one - every time I try to view the properties of any file or folder, I'm met with:

"Explorer.exe - Application Error

The instruction at "0x02e1415b" referenced at "0x000000000". The momory could not be "written".

Click on OK to terminate the program
Click on CANCEL to debug the program"

Has anyone even encountered this before? Searching the forums produced nothing.

Thank you very much for your time and effort - it's well appreciated.




Hi JohnnyUK have you seen this http://www.microsoft.com/resources/d...d_stp_hwpg.asp give it a shot. Also take a look at this http://www.microsoft.com/resources/d...d_stp_hwpg.asp.

Read other 2 answers