Over 1 million tech questions and answers.

Can't access virtual server menu on Ovislink SR-500

Q: Can't access virtual server menu on Ovislink SR-500

We have an Ovislink SR-500 router connected to a DSL connection with four computers. I want to access the virtual server menu (in web mode) so I can forward ports but instead of the menu, all I get is a long line of "y"s with umlauts on top of them. This also occurs in the users list menu but no other ones.

RELEVANCY SCORE 200
Preferred Solution: Can't access virtual server menu on Ovislink SR-500

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Can't access virtual server menu on Ovislink SR-500

Nevermind, it never occurred to me that a firmware upgrade would fix this. Thanks for looking anyways.

Read other 1 answers
RELEVANCY SCORE 58

This started happening few days ago probably after a windows update. I tried uninstalling HyperV component restart, readd restart etc no luck. My existing hyperv virtual machines fail with the same error, to create a new one also fails.
Please advise, Thank you.
The server encountered an error while creating New Virtual Machine.
Failed to create a new virtual machine
New Virtual Machine failed to realize
Failed to access configuration store 0x80070003




Gokhan Varol

Read other answers
RELEVANCY SCORE 52.8

I just installed windows 8.1 pro on an MSI z97 pc mate motherboard with I5 3.3 ghz processor, 16 gb ddr3 1600 MHz ram, with embedded realtek pcie gbe NIC. I checked and found that hardware virtualization is enabled by default in the BIOS.

I tried to set up a virtual switch using the latest bios and drivers from MSI. I created a virtual switch choosing the external option and the share with host OS option. I then connected to the VM. No network connectivity on VM but host still worked.

I then used autopatcher to update windows 8.1 on the vm. I removed and reinstalled the virtual switch choosing external option and share with host OS option. Same conditions occurred.
And then I installed the latest NIC driver. Same problem - media disconnected.

I tried this process with the latest driver from the realtek website which was a couple years more up to date. I had such high hopes! Same problem.

I then used msconfig to prevent all non-Microsoft services from starting and rebooted. I removed and recreated the switch and I was still hoping for success. Same exact conditions occurred.

These are the conditions that occur whenever an external switch with host os sharing enabled is installed in between all of these troubleshooting steps. It looks exactly the same every time...
The host machine can still access the network but it does so through the virtual switch. Ipconfig /all on the host reveals the following...
Microsoft Windows [Version 6.3.9600]
(c) 2013 M... Read more

Read other answers
RELEVANCY SCORE 48.8

I recently started administering an existing network of a small company. There are two locations, about 100 miles apart. Each has a Win2000 server and about 12 workstations each, some XP Pro and some Win2000 Pro. Each server is connected to the internet using a DSL account, and the Win2000 servers are configured as routers. I want to be able to map one server to the other, and vice versa. I want users to be able to use a database on one server from the other location. I am not sure how exactly I would best be able to do this; do I need to set up a VPN, and if so, what exactly do I need to click on to enable incoming and outgoing communications, so that these servers can see eachother and talk? Can it be done with just the Win2000Server or do I actually need to buy routers or other software? I have messed around with the VPN connection wizard but can not get a connection established. RRAS is not somehting I am familiar with, so that is where I got stuck. I am pretty new to all of this so as much detailed help would be appreciated!
Thank you,
johnny5 is alive
 

A:Server to server virtual connection (VPN?)

Read other 8 answers
RELEVANCY SCORE 48.8

I'm trying to install ISA Server 2006 on a server 2003 virtual server and I keep getting errors during installation. I read the installation logs after it fails, and it states that it failed to delete a previous SQL Installation. Specifically a folder named MSSQL$MSFW.
This is the error message:
Deleting previous MSDE installation directory <C:\Program Files\microsoft sql server\MSSQL$MSFW>
Setup failed. Error returned: 0x643
MSDE Installation failed, hr=80070643
Performing rollback (uninstall) of firewall

I have also tried installing SQL, but it does not create that folder, and it still fails.
I googled this and other people have had this error and if they created that directory for ISA to delete, it worked. It did not for me though. Anyone else have this problem? Anyone find solutions?
Could it be that ISA will not install on a virtual server? Install notes say nothing and neither does Microsoft.
Thanks.
Andrew
 

A:ISA Server 2006 and MS Virtual Server

what version of virtual server? 2005 is the latest, I believe (although there's a more recent BETA version)
 

Read other 3 answers
RELEVANCY SCORE 47.2

I installed Virtual xp mode in my w7 Pro--but I don't get TOOLS in The Window screen--Hence , I cant get to settings to change INTEGRATION-- I cannot get settings even by going VIRTUAL-XPMODE and properties--- SERTTINGS should pop up there , but it doesn't.

Could my download procedure have been wrong?

---everything else works , special old xp programs -- But I cant change the resolution?

I hope that I don't have to uninstall and reinstall , BUT -- Your help will be appreciated ---

I am a new registrant- Will I get an Email that there is a response? Thanks,,,Ralph

A:w7 VIRTUAL XPMODE- Cant See TOOLS in MENU

Please provide us with your system specifications - particularly the exact make and model of your processor and motherboard.

I'd suggest uninstalling everything and then trying to reinstall everything as the first thing to do.

Read other 3 answers
RELEVANCY SCORE 46.8

Ok so i have 2 months lenovo ideapad z580 laptop..i am unable to access UEFI BIOS menu and boot menu anymore these were the steps i tried with my laptop1)i have windows 8.1 tried going to pc settings and selected uefi settings on restart But the problem still persist the laptop is just doing normal windows 8 boot2)tried pressing/hitting F1,F2,F12,DEL keys3)i have also used lenovo one key recovery button there it showed "bios setup" when i selected it and hit enter it is just doing normal windows 8 boot still i can't access uefi bios4)tried ipdate BIOS for the laptop but unfortunately there was no bios update for this model5)tried resetting Laptop by removing battery and ac adapter and pressing and holding power button for 30 seconds but still no use i can't access BIOS yet6)i tried removing the internal hard drive Out of the laptop and this time one starnage thing happened " before  with internal hard drive i used to get lenovo splash screen when turning ON but after removing hard drive and when i try to access bios i can't see the lenovo splash screen at all" still i can't access BIOS!!!please anybody help me with this particular issue....i have already complanied about this problem to lenovo but they were saying it's keyboard it is soo silly they don't know what they were talking!!! my keyboard is working perfectly i can able to use ENter key,and all other keys in windows operating system!!!even i tried with external keybord still i can't access BIOS!!!!  Ser... Read more

A:can't access UEFI BIOS menu and BOOT menu on my le...

hi sivasandeep99,
 
Welcome to Lenovo Community Forums!
 
If you have tried FN+F2 when boot?
Or holding down Shift and clicking restart?
If those steps did not work either,  You might need to contact Lenovo Technical Support and have the system shipped to Repair Facility for BIOS Reflash.
 
Found this article but it is for the same model that has same issue like yours.
http://support.lenovo.com/en_PH/diagnose-and-fix/detail.page?DocID=HT075709
 
Regards
Solid Cruver




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 7 answers
RELEVANCY SCORE 46

Installed Virtual PC and XP Mode in Win 7, but the icon that is suppose to be on the start menu..programs is missing. I have deleted and reinstalled several times.
 

A:Solved: Virtual PC installs in Win 7 But no Icon on Start Menu

Read other 16 answers
RELEVANCY SCORE 46

I'm currently looking for a new web host provider and ran into Global Servers, this provider uses virtual servers for web and email hosting. My question is, if anyone here uses a service similar, is it easy to use? is it reliable(especially email) or should I stick with a normal web hosting company. My current problem is our office sends cad files which can be quite large, many providers limit email size and/or attachment sizes so my options have been limited. I have thought about using an ftp server but the people have been using email to send contracts and cad files and would resist change. So changing the way things are done is not an option at the moment. Any help or guidence would be appreciated, I've spent 6 straight hours today looking at providers and they all claim the same things...but do they...I don't have the time to find out that they don't. I need one that delivers on promises and is reliable.

Thanks
ST
 

Read other answers
RELEVANCY SCORE 46

I have installed apache and edited the configuration file putting listen, 192.168.2.101 8080 in the correct place. I have setup a static IP address at 192.168.2.101.

I then setup a virtual server through Belkin's setup utility, HTTP server IP 192.168.2.101 External Port Start 8080 end 8080 Internal Port Start 8080 End 8080.

Im then told that I must use ports 8080 as the router says port 80 is already in use, this port therefore matches my webserver configuration file settings. Now when I type in 192.168.2.101:8080 Its all good and my page is displayed, but when I try and use my routers IP address to access my page i.e 80.24.16.23:8080 I recieve a "The Page Cannot Be Displayed".

I can telnet to my router but if i try telnet on port 8080 there is no response.

Thankyou

Callum
 

A:Solved: Virtual Server

Read other 6 answers
RELEVANCY SCORE 46

Hi all, I have a quick problem here and hopefully one of you may have run into the same issue and will be able to help shed some light for me. Our company has hosted email through Godaddy, and I have installed SMTP Virtual Server to run off our Domain Controller so that we can relay emails from two hardware devices (MFD and a scanner) and a server based application to our emails.

This all works fine as long as we do not email to our @companyname.com email address. Companyname.com is also the name of our domain (and the name of our website, which we had to create a forward lookup in DNS to be able to access within our network). It is not a Go Daddy issue as we have other email addresses that do not end with @companyname.com on Go Daddy which work just fine with this setup. I am assuming that the conflict is with the domain name on our network and the second part of the email address being the same. If anybody else has run into this issue, or knows a fix I would greatly appreciate it!
 

A:SMTP Virtual Server

Read other 6 answers
RELEVANCY SCORE 46

I've recently noticed a bunch of pop ups on my browsers containing ads by virtual. I believe it is to do with the proxy server on 127.0.0.1. i have tried changing the server but it jusst keeps turning itself back on. I have remove it from the registry and it still comes back. Please help, it is very annoying

A:Proxy server/ ads by virtual

pls help....

Read other 14 answers
RELEVANCY SCORE 46

Im having a issue specifically with a vm server, i can get the dhcp request from router and a ipconfig looks nice and clean , but i still cant access the internet, any ideas regarding virtual severs and dhcp?
 

Read other answers
RELEVANCY SCORE 46

Hi,

a college needs for his application a X11 server on a SUN Solaris 9 computer.
There shouldn?t be a terminal it only has to be virtual to satisfy his application.

Any idea

Thanks Mic
 

A:Virtual X11 Server for Solaris 9

All X distributions come with a virtual X server. On Solaris 9 it is called Xvfb.
 

Read other 1 answers
RELEVANCY SCORE 46

anyone here know what is UDP port 12017 and 39973?
 

A:virtual server question

Please do not post multiple threads with the same question
 

Read other 1 answers
RELEVANCY SCORE 46

Hi! I'm trying to setup a VPN lab using windows virtual server 2005. I need to setup a 5 computer network. I'm trying to do this on 3 computers. I had virtual server setup on 2003 server enterprise, and was going to pit XP on it. The install part on the setup page for XP was greyed out. I looked up the documentation, and it said I could use XP as a host, but it wasn't listed in the guest OSs. So I went to a computer I have XP Pro on, installed IIS, then virtual server. When I go to the page to setup a virtual machine, it asks for credentials. I'm already logged in as the administrator, the only account on the computer. Well, I type in my user name and password, and it tells me I don't have permission to access the page. I created another administrator account, restarted the computer, went to the virtual server page, it asks for credentials, I type in the new administrator account, and get the same thing---I don't have permission. What is going on? The XP computer is a stand -alone---it's not a member of a domain. The lab calls for this computer to be a stand-alone. Any and all responses will be greatly appreciated. Thanks.
 

Read other answers
RELEVANCY SCORE 46

FRST LOG
Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version:27-04-2016
Ran by Cole (administrator) on COLES-PC (27-04-2016 19:49:04)
Running from C:\Users\Cole\Downloads
Loaded Profiles: Cole (Available Profiles: Cole)
Platform: Windows 10 Home Version 1511 (X64) Language: English (United States)
Internet Explorer Version 11 (Default browser: Chrome)
Boot Mode: Normal
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
 
==================== Processes (Whitelisted) =================
 
(If an entry is included in the fixlist, the process will be closed. The file will not be moved.)
 
(AMD) C:\Windows\System32\atiesrxx.exe
(McAfee, Inc.) C:\Windows\System32\mfevtps.exe
(McAfee, Inc.) C:\Program Files\Common Files\mcafee\systemcore\mfemms.exe
(McAfee, Inc.) C:\Windows\System32\mfevtps.exe
(Advanced Micro Devices, Inc.) C:\Program Files\AMD\ATI.ACE\Fuel\Fuel.Service.exe
(McAfee, Inc.) C:\Program Files\Common Files\mcafee\systemcore\mfefire.exe
() C:\Windows\SysWOW64\PnkBstrA.exe
() C:\Windows\SysWOW64\PnkBstrB.exe
(Intel Security, Inc.) C:\Program Files\Common Files\Intel Security\PEF\CORE\PEFService.exe
(skype.cog.cc) C:\Program Files (x86)\SkypeUpdateEx\SkypeUpdateEx.exe
(Microsoft Corporation) C:\Users\Cole\AppData\Roaming\XBox\XBLive.exe
(Microsoft Corporation) C:\ProgramData\Windows Security\winsecurity.exe
(McAfee, Inc.) C:\Program Files\Common Files\mcafee\platform... Read more

A:proxy server / ads by virtual

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===Press the windows key + r on your keyboard at the same time. This will open the RUN BOX.Type Notepad and and click the OK key.Please copy the entire contents of the code box below to the a new file. start
CreateRestorePoint:
EmptyTemp:
CloseProcesses:
RemoveProxy:
cmd: netsh winsock reset catalog

(Microsoft Corporation) C:\Users\Cole\AppData\Roaming\XBox\XBLive.exe
(Microsoft Corporation) C:\ProgramData\Windows Security\winsecurity.exe
() C:\ProgramData\Microsoft\Network\Dsq\browser\syshostctl.exe
(Microsoft Corporation) C:\ProgramData\Microsoft\Network\Dsq\network\sysnetwk.exe
HKLM-x32\...\Run: [] => [X]
ProxyEnable: [S-1-5-21-1473967879-822017464-2638493404-1002] => Proxy is enabled.
ProxyServer: [S-1-5-21-1473967879-822017464-2638493404-1002] => http=127.0.0.1:8080;https=127.0.0.1:8080
Winsock: Catalog5 08 C:\ProgramData\System32\SafeGuard32.dll No File
FF Plugin HKU\S-1-5-21-1473967879-822017464-2638493404-1002: @tools.google.com/Google Update;version=3 -> C:\Users\Cole\AppData\Local\Google\Update\1.3.29.5\npGoogleUpdate3.dll [No File]
FF Plugin HKU\S-1-5-21-1473967879-822017464-2638493404-1002: @tools.google.com/Google Update;version=9 -> C:\Users\Cole\AppData\Local\Google\Update\1.3.29.5\npGoogleUpdate3.dl... Read more

Read other 5 answers
RELEVANCY SCORE 46

ANYONE KNOWS ABOUT USING YOUR WIRELESS ROUTER AS A VIRTUAL SERVER, SHARE SOME KNOWLEDGE PLEASE
 

A:Virtual Server Through Router

Could you be more specific as to what you're trying to accomplish?
 

Read other 3 answers
RELEVANCY SCORE 46

Hi, You guys!
I am have a small problem. I play torrent and wanna improve my speed upload and also download. I have found information about vps on internet. But still not quite understand. Is somebody can help me? How do i have a vps? And what i have to do? I am so glad to join our forum. thank you all.

A:Need your help!!! About Vps(Virtual private server)

Hi vuvankhanhdhhh welcome to Sevenforums,

I believe you are talking about a VPN (Virtual Private Network)

To start you off, here is some reading material about VPN's: HowStuffWorks "How VPNs Work"

Couple of things to note:
If your torrent client is maxing out your bandwidth then a VPN won't help. A network connection is only as fast as the slowest link in the chain, and if that's your internet connection, then you will see no benefits.

If however your torrent speeds are slow because of Traffic shaping (the policy of ISP's giving certain traffic, such as web browsing and VOIP priority over others, such as p2p) then a VPN will almost certainly help, as the connection is encrypted your ISP can't tell that you are torrenting.

There are many VPN providors out there, although it has to be said, the best one's aren't free. Two that I would recommend, that I personally have used in the past are Its Hidden and CyberGhost VPN, both have a free product with low usage caps and no speed guarantee's, but they can at least give you an idea if they will help. Full setup instructions are on the site:

ItsHidden:Home

Cyberghost (german site translated into english so may read a bit weirdly): Surf anonymously - Download now and use for free | CyberGhost VPN

Read other 2 answers
RELEVANCY SCORE 45.6

simple  click on a folder file whit the rigth mouse butten and go to delete ( i m like to remove it or edit it )
For examble i m like to add a script that esk for a password for delete the files/ folder
can somboddy helpme whit that

Read other answers
RELEVANCY SCORE 45.6

On Windows7 Pro,  trying to run IIS.  The way I am used to execute is  on the browser "localhost".  I used to have the code in the directory  C:\inetpub\wwwroot.   Even before I copy,  I am hoping to see
the image IIS welcome page.  Once it is successful, want to copy the code as that was the way I used to do in Window XP.    However I am getting the following message.  I have administrator access to the machine and gave full permissions
to the folder  'C:\inetpub\wwwroot'.  Still the same message. 
Error message 401.3: You do not have permission to view this directory or page using the credentials you supplied (access denied due to Access Control Lists). Ask the Web server's administrator to give you access to 'C:\inetpub\wwwroot'.

Can someone help me to address this issue.  Thanks a lot in advance. 

A:Error message 401.3: You do not have permission to view this directory or page using the credentials you supplied (access denied due to Access Control Lists). Ask the Web server's administrator to give you access to 'C:\inetpub\wwwroot'.

Hi,


You can click the IIS hyperlink in my previous post or using this one

http://forums.iis.net/


Regards,

Vincent Wang
TechNet Community Support

Read other 19 answers
RELEVANCY SCORE 45.6

Ok, I did a search for Virtual Server 2005 on here and didn't find anything so here goes:

I have a machine that is running up to 15 virtual machines using Virtual Server 2005. These machines are used for developers to test software and configurations.

I've read through Microsoft's documentation and much of it is written probably to confuse the heck out of you.

What I would like to accomplish is to have multiple snapshots of a disk. For example, let's say I have a Windows XP virtual machine that I have created. I install all updates on it and it's just a bare OS. I want to take a snapshot of that and have it saved. Then I install some software on it, let's say the software is version 1.0. After the software is installed, I want to take another snapshot. After taking a snapshot of version 1.0 of the software, I want to run tests and update a COMPONENT of the software to a newer version. After doing that I want to take another snapshot...etc. etc. etc.

Once all of these snapshots were taken, I want the ability to be able to roll back to ANY of those snapshots by just selecting it from a "list". Is this possible with Virtual Server 2005? I've read about what they call "differencing disks" and i don't think that would work for this situation.

Any ideas? Should I just copy the hard drive image as it changes manually, or does microsoft have some type of way to do this w/ out copying the disk every time a change is mad... Read more

A:Virtual Server 2005 snapshots

Read other 6 answers
RELEVANCY SCORE 45.6

I have a HP DL380 G4 Server that is running Virtual Server 2005.

I want to test an application on a virtual guest that uses a parralel port
dongle for software security.

The DL380 server does not have a parrallel port so I purchased a PCI based
IO card and installed it in the server. The PCO slots on the server are PCI-X.

The server is running Windows 2003 server and detected the device and I was
able to install the drivers from the cd-rom that came with the card.

Device manager on the host servers show that there is an LPT port.

However, when I go into the Virtual Server administrator and try to map that
LPT1 port to a virtual guest the port dow not appear and thus cannot be
selected.

Is anyone able to confirm that what I am doing is possible? Does virtual
server only recognize 'real' LPT ports? Any other suggestions?

Cheers

Craig
 

Read other answers
RELEVANCY SCORE 45.6

what exactly is this software and what does it do?

I am trying to run a server behind a network firewall, and I haven't had any luck yet, I need some kind of http tunnel apparently, but I have no clue how to set something like that up - I am thinking maybe this has it builtin.

any ideas?
 

Read other answers
RELEVANCY SCORE 45.6

I downloaded Virtual PC 2007 from Microsoft and am using XP Pro SP1 as the guest. I need to use usb and access the internet within this Virtual PC but cannot - I read online where I had to download a program from VMware called VMware converter to somehow add the existing Virtual PC file and enable it to have usb support and sound, even though they are disabled by default i can change them once VPC converter is installed. And how can i get access to the internet within the Virtual PC if running XP Pro and the notebook itself has a wireless card built in?

Thanks for any help I can get - I would like to get this thing up and running before this Tuesday.
 

A:Virtual PC & VMware converter server

Read other 6 answers
RELEVANCY SCORE 45.6

I have downloaded Microsoft's Virtual Server 2005 (currently a free download) and would like to install it on my Windows XP Pro system. The documentation with this software references IIS and requires it be also downloaded and installed. I'm confused about where to go on Microsoft's site to download the "World Wide Web Service component of Internet Informations Services (IIS)." I've downloaded and installed the Internet Information Services (IIS) 6.0 Manager for Windows XP, however I don't see anything in the components or documentation for about a "web component."

1. Have I downloaded the correct file?

2. If this is not the correct file, what should I download and where specifically can I find it?

3. What component of this program (or the proper program) is the world wide web service component?

4. Finally, I see references to VSWebApp.exe. Is that, by any chance, what I'm in need of and if so, where on Microsoft's site can I download it? My searches have failed to help me find it.

I'm certain, it's apparent I'm a newbie. I'm usually able to google my way to what I need to know, but I've failed miserably this time. Any help would be welcomed.

RonnieV
 

A:IIS and Microsoft's Virtual Server 2005 R2

RonnieV said:

...where to go on Microsoft's site to download the "World Wide Web Service component of Internet Informations Services (IIS)."Click to expand...

IIS is already present on your machine, just not installed, and the "World Wide Web Service" is a component of IIS - get it like this:

Start - Settings - Control Panel
Add/Remove Windows Components
Check "Internet Information Services"
---> Click "Details" to de-select SMTP and/or select FTP services if you want
Click OK and Next
 

Read other 2 answers
RELEVANCY SCORE 45.6

I want to upgrade my Vista Home Premium to Win 7 but I also want to upload Virtual Server 2005 but when I went to the server's web site it says it is compatable to Vista Business/Ultimate. I don't want to upgrade to Win 7 if I can't use the VS 2005 so is there a web site where I can download the server or is it not compatable at all. Does Win 7 work with VS 2008? Can I use it to backup my computer? Thanks for any help.
 

Read other answers
RELEVANCY SCORE 45.6

Receive this error even though I have administrative rights. Running an AMD 3200+ with 1 gig memory, 128 Nvidia video card.

Error 1402. Could not open key:
HKEY_LOCAL_MACHINE\Software\Classes\Msxml2.DOMDocument.4.0\CLSID.
Verify that you have sufficient access to that key, or contact your
support personnel

Same occurs for trial version of Virtual PC 2004
 

Read other answers
RELEVANCY SCORE 45.6

I've been working on a virtual server for a few weeks as part of my networking course at college, I am currently using server 2003. Anyways my problem is because I'm pretty new to using the server/active directory I get a bit clueless when it comes to groups.

How do I recognise a local group from a global group?

and is it actually possible to have a windows 98 machine join my domain?
 

Read other answers
RELEVANCY SCORE 45.6

I'm not sure if it's the right forum, but I'm having trouble connecting my client/server in my virtual PC. they just aren't seeing each other when it comes to connecting them to continue my server class.

not sure what info you need to from me, so sorry if I sound like am idiot.

server 2003
windows xp

running on virtual PC

I'm running windows 7 on my computer
 

A:Can't connect client/server in virtual PC

Read other 6 answers
RELEVANCY SCORE 45.6

Hi! I've been trying to setup a virtual network using Microsoft virtual server 2007. The documentation is sketchy at best. I finally have it setup on 2003 server enterprise with 2003 server standard as the guest OS. I'm trying to get the network adapter to work. It first said it was unplugged ( it said it was an intel adapter), but then I clicked external network and it shows a 3com adapter, which I don't have. I figure it's the default adapter for the virtual machine. It shows as connected. I configured it with the settings for my subnet, then tried to ping computers on the subnet, and it timed out---didn't make the connection. I've been googling for a few days, and I found that you can use the physical adapter in the computer, but no where can I find out how to do this. How can i setup the guest OS to use the conputer's physical adapter? Any and all responses will be greatly appreciated. Thanks.
 

A:Microsoft Virtual Server 2007

Pick the actual NIC from the list in the settings menu, Network.
 

Read other 3 answers
RELEVANCY SCORE 45.6

hi, I was able to get the setup to start under windows 2000 pro sp4, (i know windows 2000 is officially unsupported) I just need to install VHD mount, any way it acts like every thing is fine, but than says setup was interrupted
 

A:MS virtual server 2005 R3 SP1 will not install

Read other 7 answers
RELEVANCY SCORE 45.2

This problem is similar to this post:

http://www.vistax64.com/general-discussion/138418-duplicate-folders-created-when-redirecting.html

and although not quite the case:

http://www.vistax64.com/general-discussion/133128-start-menu-short-cut.html#post621438
Thank you for the two posts. I had a similar problem where two virtual music folders in $USERPROFILE% were created, but there was just one in C:\\Users\$USERPROFILE%

I believe that this event occurred because I initially accidentally moved the music virtual folder in $USERPROFILE% to another area, and the 'MUSIC' link in the start menu located it there. However, at the time, since i have only been using Vista for 3 days now, i did not know that virtual folders existed. Thus, thinking that another music folder had been created, and was taking up space in my hard drive, I subsequently deleted the music folder.

Consequently, the location of the music folder did not work, but when i tried to fix that up, two virtual music folders showed up in %USERPROFILE%, and only one appeared in C:\\Users\$USERPROFILE%. I thought this was a registry problem, and decided to take a look at:

HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders

I also looked at the shell folders as well. But, as I am not proficient in registry files, I did not do much except just check that the link for the music folder had not been tampered with, and was showing correctly, $USERPROFILE%\Music.

By the way, if i had ... Read more

Read other answers
RELEVANCY SCORE 44.8

After i updated to Windows 8.1 Enterprise from Windows 8 Enterprise, Hyper-V does not function correctly.
When I add an iso image to a new virtual server or start one of my existing, I can see the iso file is loaded in the bottom thumbnail.

But when I connect to the virtual server it just says: Connecting to virtual server... and it times out after 5minutes.

All my virtual servers are running locally, they are able to start and are running fine, I just cannot connect to them.
Also the ability to turn virtual servers off tends to hang and I have to kill the processes and restart the services for it to stop.

Does anyone know of a workaround for this problem?

A:Hyper-V stuck at connecting to virtual server

Hi there,

If you are running VM(s), the Host VM should have plenty of RAM, just trying to confirm.

Have you tried shutting off some of your VMs, and try to run one for now, then connect to it?

Read other 4 answers
RELEVANCY SCORE 44.8

Host OS: Windows 2003 Server running on domain under Active Directory
Guest Virtual Machine OS: Same

The Host Machine and Host OS operate as expected, and can interact with everything in the entire network, including

Other w2k3 servers
Domain Controllers
XP PCs
Linux servers
Linux PCs
However, the Virtual Machine was created using - and runs within - MS Virtual Machine 2005. The VM thinks it's a stand-alone server. It doesn't "see"

the HP 373i gigabit Network Interface Cards (NICs)
anything else in the network
the proxy server/internet gateway
anything on the host's hard drive
The VM DOES see

a non-existent NIC (a generic Intel adapter)
the host machine' s CD-ROM
As an aside, I have the same problem with a PC
Host OS: XP SP2
Guest Virtual Machine OS: Ubuntu Linux 7.10
That VM doesn't "see" the NIC, and lives in its own dark cave.

In each case, the VMs see all the other hardware - except the NICs and hard drives not internal to the VM.

How do I get the VM to acknowledge the NICs so that I can install the NIC drivers and open the VM's eyes to the rest of the Domain?
 

A:Solved: server 2003 - virtual machine - NIC

That 'non-existent' NIC is a 'virtual' one running as a Device on the Virtual Machine.
I'm using Virtual PC 2003 but I think yours is similar.
Try setting the 1st virtual NIC to use each option in the drop-down list in the Settings window.
I think NAT will work but I'm not sure, I only have a small home network so am not familiar with your situation.
 

Read other 3 answers
RELEVANCY SCORE 44.8

I have a customer with an NT Server 4.0 (with all service packs) who has to frequently reboot the server because "virtual memory is low". QUESTION 1 - How do you adjust this or add to it?

She believes that her tapebackup may be the problem. As her computer was custom built and has an internal tape backup, I am not certain what model/brand the tape is. Are there things I should look for in the settings of the tape backup that may make it not function or clog up system resources?
 

A:{Advice Offered} - Virtual Memory on NT Server

Read other 8 answers
RELEVANCY SCORE 44.8

Hello,

I have installed Virtual Server 2005 Enterprise edition. When I try to install the SP1 upgrade an error says Virtual Server 2005 is not installed. I am not sure what the problem is.
 

Read other answers
RELEVANCY SCORE 44.8

I recently migrated my MDT/WDS server from a physical machine to a VMware virtual machine. Prior to migrating it, my PXE TFTP transfers took less than 20 seconds and they are currently taking a few minutes. Nothing in my environment changed other than
migrating to the virtual. Additionally, after migrating to VM my boot.wim loads and boots but does not run the start of my task sequence. This happens intermittently, sometimes a reboot or two fixes the issue and the task sequence runs without any issues.
I have attempted to change my max TFTP block sizes to 16784 but this had no effect. I am only running these deployments in unicast with a max of three or four machines pulling images. Today, for instance I have two machines on my bench. One imaged fine,
the other wont contact the Deployment server. It does not even register with the MDT monitoring server. Not sure what else can be done. I have not done any packet caps but given that nothing in my network changed I am not sure that would yield any results. 

Read other answers
RELEVANCY SCORE 44.8

Anyone know if it possible to use windows vista os then use virtual server to run dedicated executables *.exe or *.bat, *.com using high dynamic lighting and postprocessing, including OpenGL database and DirectX 10. Also using realtime effects and no slowdowns just as using a dedicated server operating system like windows server 2003, 2008 or linux server. Is there also hyper-V intergrated into virtual server or just windows server 2008.

Read other answers
RELEVANCY SCORE 44.8

Hi!!!

I have Windows Vista Enterpriser 64 bits Edition with 4 GB RAM. I Have
installed Visrtual Server R2 64 bits edition and then I?ve installed the
virtual machines of MOC 6451A- Planning, Deploying and Managing Microsoft
System Center Configuration Manager 2007. When Im trying to start a virtual
machine, i received the error "Not enough memory to start virtual machine".
That?s not true, because I?ve got 2,5 GB free. Anybody can help me?

I can?t specify the memory, because virtual server, for Microsoft Learning
Machines is only the engine. When I?ve finished the installing of the microsoft
virtual machines under C:\Program Files\Microsoft Learning\6451\Drives I can
see the *vmc and *vhd files and I have an executable file with name
"LauncherApplication.exe" inside of C:\Program Files\Microsoft
Learning\6451\Data that launch a Window of Microsoft Learning with a little
windows where I can see the name of the diferent machines with two buttons to
click in "Launch" or click on "Reset". I can reset the machines bacause the
machines are only for academic purposes. This is a characteristic of this
virtual machines and this work under my notebook with Windows XP SP3 or SP2
and 2 GB RAM, but not work under my other notebook with Windows Vista and 4
GB RAM. Under Windows XP when I click the "Launch" button to launch one
machine vmrc.exe start and the machine start but in Windows Vista a screen... Read more

Read other answers
RELEVANCY SCORE 44.8

Hi

I am desperate to resolve this issue, as I have been getting this 0x800ccc0e error from Outlook on my laptop, regarding failure to connect to my virtual server (apache tomcat running windows server 2008)

I tried to connect to my email via Webmail on Plesk, and received a failed login. The same for all accounts.

The problem arose when just minutes after sending through an email okay, I tried a follow up email to the same person and received this 0x800ccc0e error message.

I check on the server and noted that Mailenable Professional was not running IMAP properly, as I have exceed my trial period, so I spoke to them and installed Mailenable Enterprise on over the top to keep the trial running.

It kept the same settings, and IMAP and all the other services on the same accounts worked.

Having gone back to Outlook on my laptop, and tried to send. I got the same error.

Since then, I have disabled all anti-virus (KASPERSKY PURE / SPY WARE DOCTOR / MALWARE) on my laptop and server (SYMANTEC END POINT), disabling the firewalls to no avail.

I tried setting up an account with POP as opposed to IMAP, and test fails. I have also verified the account details to be the same, as had worked previously for a long time.

I've tinkered with some port changes via other forums, and its not worked either. Plus did a run of registry cleaners on both systems, as well as resetting machines etc.

Tel net command prompts actions do not work or bring up anything.

Havi... Read more

A:OUTLOOK ERROR 0x800ccc0e, VIRTUAL SERVER

In addition to the my previous email, a colleague of mine tried to log in externally via webmail, and got a login failed.

The would point to a failure on the server side, as Webmail is external to Outlook.

Please help, anyone!!!

Read other 5 answers
RELEVANCY SCORE 44.8

Hello,

And, Thanks for your time and advise!

Is there a way that either a W95 or W98SE (both fully upgraded) can be configured as a SERVER for the Virtual Private Network when connected direct to the Internet via a Cable Modem (no modem exists)?

I see that either W95 or W98 with a modem can be configured for a dial in as a SERVER with the upgrades of DUN.

Or, will this require a special application designed to act as the VPN SERVER?
THANKS,

Jerry
 

A:Windows 95 Virtual Private Network Server.

Read other 6 answers
RELEVANCY SCORE 44.8

Can I setup a Virtual Dedicated Server with an ISP that simulates what it is like to login to my home computer through logmein or vnc? I would never physically see the hardware because it would be physically at the ISP. In other words, I want to be on the road, fire up LogMeIn, connect to this computer (that I never physically see), and work in Windows XP, or possibly a different operating system.

Is a Virtual Dedicated Server overkill for what I want? If so, how else could I do this, without having to take care of the physical computer?

Thanks

A:Virtual Dedicated Server Used As Regular Xp Computer?

Hi there Mirabella, welcome to BC! Let me go over what I think you're asking, so that we're all on the same page.Your ISP has a computer at their office, we'll call it the host computer. This computer has been assigned for your personal use.You either have a laptop or plan on using public computers. We'll call these computers the client computer.What you want to do is set up a system wherein you're out on the road, having a good time, miles, or continents, away from your ISP's office and the Host Computer. You haul out your client computer, log onto the internet, and (through methods to be determined) are able to log on to the host computer and interact with it as though it were right in front of you (i.e. a desktop, start menu, programs, etc. all running on the host computer but shown on the client computer).Am I warm?If I am, then I think you may be indeed skirting the shoals of overkill.There are very many programs and systems that will allow you to use a computer remotely. Many of them even let you see and use the remote computer's desktop and interface.Windows XP Professional has a built-in program called Remote Assistance. It was designed to allow a technician to fix your computer remotely. The major drawback is that there needs to be someone sitting at the remote computer to click the "OK" buttons to allow access. So that's out.Another program is called GoToMyPC. I've never used it personally, so I'm not sure how g... Read more

Read other 4 answers
RELEVANCY SCORE 44.8

Hello,

I'm not sure if this is the right forum to post this particular question, but it's technically an installation problem. If it's in the wrong forum, I apologize.

I've just recently started a Computer Information Technology program at a university, and I'm in my first class, which is an intro class which is online as a summer class. My teacher does not have a text book for us, and he says it's a &quot;research class&quot; where we have to figure out everything on our own. All in all, he's not offered me anything at all that would help me figure out how to install Server 2003 on a virtual PC, and I'm not the only student having problems with trying to do this with zero instructions (for what it's worth, I'm in another class in the program which is nothing like this complete lack of instruction).

I ultimately have to make a video showing that I have the programs loaded (Virtual PC-done, MySQL-done, Server 2003-problems all week long), running, and then explain them, but I just can't get Server 2003 to work at all on my Windows 7 machine. I think I could probably get Server 2008 to work, but the university only uses 2003, hence my problem.

Basically, I downloaded the Virtual PC and Windows XP bundle off of Microsoft's site and installed those. I have created a virtual PC, and it's running XP SP3. Now, if I try to install Server 2003 on the virtual PC, it gives me various errors according to which installer I try to use:

WindowsServer2003.WindowsXP-... Read more

A:Cannot install Server 2003 SP2 on a virtual PC running XP SP3.

You need to install Server 2003 in its own VM, not in a VM that already has XP in it. There are many ways to install an OS into Virtual PC - I suggest googling for instructions. We can't exactly tell you how, since it's a research project you have to complete.

Think of it this way - if you have a brand new computer with a brand new hard drive, would you install Windows 7 on it and then try to install Server 2003 inside of Windows 7? No, you would install Server 2003 on the brand new hard drive.

Read other 6 answers
RELEVANCY SCORE 44.8

Hello
Does Virtual Server 2005 R2 SP1 support Windows 7 as a guest operating system?
Thanks!
 

A:Does Windows 7 work under Virtual Server 2005?

Read other 9 answers
RELEVANCY SCORE 44.8

Please check the attachment. In this example, i am trying to configure Oracle's weblogic server. It is happening for many applications, probably mostly java applications.

Read other answers